node-opcua-nodeset-machine-tool 2.96.0 → 2.98.1

package/dist/enum_machine_operation_mode.d.ts

@@ -1,54 +1,54 @@
-/**
- * |           |                                                  |
- * |-----------|--------------------------------------------------|
- * | namespace |http://opcfoundation.org/UA/MachineTool/          |
- * | nodeClass |DataType                                          |
- * | name      |10:MachineOperationMode                           |
- * | isAbstract|false                                             |
- */
-export declare enum EnumMachineOperationMode {
-    /**
-     * The machine tool is controlled manually, by the
-     * operator. Depending on technology specific norms,
-     * the maximum axis movement speeds of the machine
-     * tool are limited.
-     */
-    Manual = 0,
-    /**
-     * Operating mode for the automatic, programmed and
-     * continuous operation of the machine. Manual
-     * loading and unloading workpieces are possible
-     * when the automatic program is stopped. Axis
-     * movement speeds are fully available to the
-     * machine tool’s ability.
-     */
-    Automatic = 1,
-    /**
-     * Depending on technology specific norms, the
-     * maximum axis movement speeds of the machine tool
-     * are limited. In this mode, the operator can make
-     * settings for the subsequent work processes.
-     */
-    Setup = 2,
-    /**
-     * Operating mode with the possibility of manual
-     * interventions in the machining process as well as
-     * limited automatic operation started by the
-     * operator. Depending on technology specific norms,
-     * the maximum axis movement speeds of the machine
-     * tool are limited.
-     */
-    AutoWithManualIntervention = 3,
-    /**
-     * Operating mode for service purposes. This mode
-     * shall not be used for manufacturing any parts.
-     * This mode shall only be used by authorized
-     * personnel.
-     */
-    Service = 4,
-    /**
-     * The machine operation mode is different from the
-     * values defined in this enumeration.
-     */
-    Other = 5
-}
+/**
+ * |           |                                                  |
+ * |-----------|--------------------------------------------------|
+ * | namespace |http://opcfoundation.org/UA/MachineTool/          |
+ * | nodeClass |DataType                                          |
+ * | name      |10:MachineOperationMode                           |
+ * | isAbstract|false                                             |
+ */
+export declare enum EnumMachineOperationMode {
+    /**
+     * The machine tool is controlled manually, by the
+     * operator. Depending on technology specific norms,
+     * the maximum axis movement speeds of the machine
+     * tool are limited.
+     */
+    Manual = 0,
+    /**
+     * Operating mode for the automatic, programmed and
+     * continuous operation of the machine. Manual
+     * loading and unloading workpieces are possible
+     * when the automatic program is stopped. Axis
+     * movement speeds are fully available to the
+     * machine tool’s ability.
+     */
+    Automatic = 1,
+    /**
+     * Depending on technology specific norms, the
+     * maximum axis movement speeds of the machine tool
+     * are limited. In this mode, the operator can make
+     * settings for the subsequent work processes.
+     */
+    Setup = 2,
+    /**
+     * Operating mode with the possibility of manual
+     * interventions in the machining process as well as
+     * limited automatic operation started by the
+     * operator. Depending on technology specific norms,
+     * the maximum axis movement speeds of the machine
+     * tool are limited.
+     */
+    AutoWithManualIntervention = 3,
+    /**
+     * Operating mode for service purposes. This mode
+     * shall not be used for manufacturing any parts.
+     * This mode shall only be used by authorized
+     * personnel.
+     */
+    Service = 4,
+    /**
+     * The machine operation mode is different from the
+     * values defined in this enumeration.
+     */
+    Other = 5
+}

package/dist/enum_machine_operation_mode.js

@@ -1,60 +1,60 @@
-"use strict";
-// ----- this file has been automatically generated - do not edit
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.EnumMachineOperationMode = void 0;
-/**
- * |           |                                                  |
- * |-----------|--------------------------------------------------|
- * | namespace |http://opcfoundation.org/UA/MachineTool/          |
- * | nodeClass |DataType                                          |
- * | name      |10:MachineOperationMode                           |
- * | isAbstract|false                                             |
- */
-var EnumMachineOperationMode;
-(function (EnumMachineOperationMode) {
-    /**
-     * The machine tool is controlled manually, by the
-     * operator. Depending on technology specific norms,
-     * the maximum axis movement speeds of the machine
-     * tool are limited.
-     */
-    EnumMachineOperationMode[EnumMachineOperationMode["Manual"] = 0] = "Manual";
-    /**
-     * Operating mode for the automatic, programmed and
-     * continuous operation of the machine. Manual
-     * loading and unloading workpieces are possible
-     * when the automatic program is stopped. Axis
-     * movement speeds are fully available to the
-     * machine tool’s ability.
-     */
-    EnumMachineOperationMode[EnumMachineOperationMode["Automatic"] = 1] = "Automatic";
-    /**
-     * Depending on technology specific norms, the
-     * maximum axis movement speeds of the machine tool
-     * are limited. In this mode, the operator can make
-     * settings for the subsequent work processes.
-     */
-    EnumMachineOperationMode[EnumMachineOperationMode["Setup"] = 2] = "Setup";
-    /**
-     * Operating mode with the possibility of manual
-     * interventions in the machining process as well as
-     * limited automatic operation started by the
-     * operator. Depending on technology specific norms,
-     * the maximum axis movement speeds of the machine
-     * tool are limited.
-     */
-    EnumMachineOperationMode[EnumMachineOperationMode["AutoWithManualIntervention"] = 3] = "AutoWithManualIntervention";
-    /**
-     * Operating mode for service purposes. This mode
-     * shall not be used for manufacturing any parts.
-     * This mode shall only be used by authorized
-     * personnel.
-     */
-    EnumMachineOperationMode[EnumMachineOperationMode["Service"] = 4] = "Service";
-    /**
-     * The machine operation mode is different from the
-     * values defined in this enumeration.
-     */
-    EnumMachineOperationMode[EnumMachineOperationMode["Other"] = 5] = "Other";
-})(EnumMachineOperationMode = exports.EnumMachineOperationMode || (exports.EnumMachineOperationMode = {}));
+"use strict";
+// ----- this file has been automatically generated - do not edit
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.EnumMachineOperationMode = void 0;
+/**
+ * |           |                                                  |
+ * |-----------|--------------------------------------------------|
+ * | namespace |http://opcfoundation.org/UA/MachineTool/          |
+ * | nodeClass |DataType                                          |
+ * | name      |10:MachineOperationMode                           |
+ * | isAbstract|false                                             |
+ */
+var EnumMachineOperationMode;
+(function (EnumMachineOperationMode) {
+    /**
+     * The machine tool is controlled manually, by the
+     * operator. Depending on technology specific norms,
+     * the maximum axis movement speeds of the machine
+     * tool are limited.
+     */
+    EnumMachineOperationMode[EnumMachineOperationMode["Manual"] = 0] = "Manual";
+    /**
+     * Operating mode for the automatic, programmed and
+     * continuous operation of the machine. Manual
+     * loading and unloading workpieces are possible
+     * when the automatic program is stopped. Axis
+     * movement speeds are fully available to the
+     * machine tool’s ability.
+     */
+    EnumMachineOperationMode[EnumMachineOperationMode["Automatic"] = 1] = "Automatic";
+    /**
+     * Depending on technology specific norms, the
+     * maximum axis movement speeds of the machine tool
+     * are limited. In this mode, the operator can make
+     * settings for the subsequent work processes.
+     */
+    EnumMachineOperationMode[EnumMachineOperationMode["Setup"] = 2] = "Setup";
+    /**
+     * Operating mode with the possibility of manual
+     * interventions in the machining process as well as
+     * limited automatic operation started by the
+     * operator. Depending on technology specific norms,
+     * the maximum axis movement speeds of the machine
+     * tool are limited.
+     */
+    EnumMachineOperationMode[EnumMachineOperationMode["AutoWithManualIntervention"] = 3] = "AutoWithManualIntervention";
+    /**
+     * Operating mode for service purposes. This mode
+     * shall not be used for manufacturing any parts.
+     * This mode shall only be used by authorized
+     * personnel.
+     */
+    EnumMachineOperationMode[EnumMachineOperationMode["Service"] = 4] = "Service";
+    /**
+     * The machine operation mode is different from the
+     * values defined in this enumeration.
+     */
+    EnumMachineOperationMode[EnumMachineOperationMode["Other"] = 5] = "Other";
+})(EnumMachineOperationMode = exports.EnumMachineOperationMode || (exports.EnumMachineOperationMode = {}));
 //# sourceMappingURL=enum_machine_operation_mode.js.map

package/dist/enum_part_quality.d.ts

@@ -1,33 +1,33 @@
-/**
- * |           |                                                  |
- * |-----------|--------------------------------------------------|
- * | namespace |http://opcfoundation.org/UA/MachineTool/          |
- * | nodeClass |DataType                                          |
- * | name      |10:PartQuality                                    |
- * | isAbstract|false                                             |
- */
-export declare enum EnumPartQuality {
-    /**
-     * The machine tool is not able to give a statement
-     * about the part quality.
-     */
-    CapabilityUnavailable = 0,
-    /**
-     * The part quality is determined good.
-     */
-    Good = 1,
-    /**
-     * The part quality is determined bad.
-     */
-    Bad = 2,
-    /**
-     * The PartQuality will still be determined in the
-     * machine tool to be either Good or Bad.
-     */
-    NotYetMeasured = 3,
-    /**
-     * The machine tool will not give a statement about
-     * the part quality.
-     */
-    WillNotBeMeasured = 4
-}
+/**
+ * |           |                                                  |
+ * |-----------|--------------------------------------------------|
+ * | namespace |http://opcfoundation.org/UA/MachineTool/          |
+ * | nodeClass |DataType                                          |
+ * | name      |10:PartQuality                                    |
+ * | isAbstract|false                                             |
+ */
+export declare enum EnumPartQuality {
+    /**
+     * The machine tool is not able to give a statement
+     * about the part quality.
+     */
+    CapabilityUnavailable = 0,
+    /**
+     * The part quality is determined good.
+     */
+    Good = 1,
+    /**
+     * The part quality is determined bad.
+     */
+    Bad = 2,
+    /**
+     * The PartQuality will still be determined in the
+     * machine tool to be either Good or Bad.
+     */
+    NotYetMeasured = 3,
+    /**
+     * The machine tool will not give a statement about
+     * the part quality.
+     */
+    WillNotBeMeasured = 4
+}

package/dist/enum_part_quality.js

@@ -1,39 +1,39 @@
-"use strict";
-// ----- this file has been automatically generated - do not edit
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.EnumPartQuality = void 0;
-/**
- * |           |                                                  |
- * |-----------|--------------------------------------------------|
- * | namespace |http://opcfoundation.org/UA/MachineTool/          |
- * | nodeClass |DataType                                          |
- * | name      |10:PartQuality                                    |
- * | isAbstract|false                                             |
- */
-var EnumPartQuality;
-(function (EnumPartQuality) {
-    /**
-     * The machine tool is not able to give a statement
-     * about the part quality.
-     */
-    EnumPartQuality[EnumPartQuality["CapabilityUnavailable"] = 0] = "CapabilityUnavailable";
-    /**
-     * The part quality is determined good.
-     */
-    EnumPartQuality[EnumPartQuality["Good"] = 1] = "Good";
-    /**
-     * The part quality is determined bad.
-     */
-    EnumPartQuality[EnumPartQuality["Bad"] = 2] = "Bad";
-    /**
-     * The PartQuality will still be determined in the
-     * machine tool to be either Good or Bad.
-     */
-    EnumPartQuality[EnumPartQuality["NotYetMeasured"] = 3] = "NotYetMeasured";
-    /**
-     * The machine tool will not give a statement about
-     * the part quality.
-     */
-    EnumPartQuality[EnumPartQuality["WillNotBeMeasured"] = 4] = "WillNotBeMeasured";
-})(EnumPartQuality = exports.EnumPartQuality || (exports.EnumPartQuality = {}));
+"use strict";
+// ----- this file has been automatically generated - do not edit
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.EnumPartQuality = void 0;
+/**
+ * |           |                                                  |
+ * |-----------|--------------------------------------------------|
+ * | namespace |http://opcfoundation.org/UA/MachineTool/          |
+ * | nodeClass |DataType                                          |
+ * | name      |10:PartQuality                                    |
+ * | isAbstract|false                                             |
+ */
+var EnumPartQuality;
+(function (EnumPartQuality) {
+    /**
+     * The machine tool is not able to give a statement
+     * about the part quality.
+     */
+    EnumPartQuality[EnumPartQuality["CapabilityUnavailable"] = 0] = "CapabilityUnavailable";
+    /**
+     * The part quality is determined good.
+     */
+    EnumPartQuality[EnumPartQuality["Good"] = 1] = "Good";
+    /**
+     * The part quality is determined bad.
+     */
+    EnumPartQuality[EnumPartQuality["Bad"] = 2] = "Bad";
+    /**
+     * The PartQuality will still be determined in the
+     * machine tool to be either Good or Bad.
+     */
+    EnumPartQuality[EnumPartQuality["NotYetMeasured"] = 3] = "NotYetMeasured";
+    /**
+     * The machine tool will not give a statement about
+     * the part quality.
+     */
+    EnumPartQuality[EnumPartQuality["WillNotBeMeasured"] = 4] = "WillNotBeMeasured";
+})(EnumPartQuality = exports.EnumPartQuality || (exports.EnumPartQuality = {}));
 //# sourceMappingURL=enum_part_quality.js.map

package/dist/enum_process_irregularity.d.ts

@@ -1,28 +1,28 @@
-/**
- * |           |                                                  |
- * |-----------|--------------------------------------------------|
- * | namespace |http://opcfoundation.org/UA/MachineTool/          |
- * | nodeClass |DataType                                          |
- * | name      |10:ProcessIrregularity                            |
- * | isAbstract|false                                             |
- */
-export declare enum EnumProcessIrregularity {
-    /**
-     * The machine tool is not able to give a statement
-     * about process irregularities.
-     */
-    CapabilityUnavailable = 0,
-    /**
-     * A process irregularity has been detected.
-     */
-    Detected = 1,
-    /**
-     * There was no process irregularity detected.
-     */
-    NotDetected = 2,
-    /**
-     * A statement about the process irregularity is to
-     * be expected.
-     */
-    NotYetDetermined = 3
-}
+/**
+ * |           |                                                  |
+ * |-----------|--------------------------------------------------|
+ * | namespace |http://opcfoundation.org/UA/MachineTool/          |
+ * | nodeClass |DataType                                          |
+ * | name      |10:ProcessIrregularity                            |
+ * | isAbstract|false                                             |
+ */
+export declare enum EnumProcessIrregularity {
+    /**
+     * The machine tool is not able to give a statement
+     * about process irregularities.
+     */
+    CapabilityUnavailable = 0,
+    /**
+     * A process irregularity has been detected.
+     */
+    Detected = 1,
+    /**
+     * There was no process irregularity detected.
+     */
+    NotDetected = 2,
+    /**
+     * A statement about the process irregularity is to
+     * be expected.
+     */
+    NotYetDetermined = 3
+}

package/dist/enum_process_irregularity.js

@@ -1,34 +1,34 @@
-"use strict";
-// ----- this file has been automatically generated - do not edit
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.EnumProcessIrregularity = void 0;
-/**
- * |           |                                                  |
- * |-----------|--------------------------------------------------|
- * | namespace |http://opcfoundation.org/UA/MachineTool/          |
- * | nodeClass |DataType                                          |
- * | name      |10:ProcessIrregularity                            |
- * | isAbstract|false                                             |
- */
-var EnumProcessIrregularity;
-(function (EnumProcessIrregularity) {
-    /**
-     * The machine tool is not able to give a statement
-     * about process irregularities.
-     */
-    EnumProcessIrregularity[EnumProcessIrregularity["CapabilityUnavailable"] = 0] = "CapabilityUnavailable";
-    /**
-     * A process irregularity has been detected.
-     */
-    EnumProcessIrregularity[EnumProcessIrregularity["Detected"] = 1] = "Detected";
-    /**
-     * There was no process irregularity detected.
-     */
-    EnumProcessIrregularity[EnumProcessIrregularity["NotDetected"] = 2] = "NotDetected";
-    /**
-     * A statement about the process irregularity is to
-     * be expected.
-     */
-    EnumProcessIrregularity[EnumProcessIrregularity["NotYetDetermined"] = 3] = "NotYetDetermined";
-})(EnumProcessIrregularity = exports.EnumProcessIrregularity || (exports.EnumProcessIrregularity = {}));
+"use strict";
+// ----- this file has been automatically generated - do not edit
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.EnumProcessIrregularity = void 0;
+/**
+ * |           |                                                  |
+ * |-----------|--------------------------------------------------|
+ * | namespace |http://opcfoundation.org/UA/MachineTool/          |
+ * | nodeClass |DataType                                          |
+ * | name      |10:ProcessIrregularity                            |
+ * | isAbstract|false                                             |
+ */
+var EnumProcessIrregularity;
+(function (EnumProcessIrregularity) {
+    /**
+     * The machine tool is not able to give a statement
+     * about process irregularities.
+     */
+    EnumProcessIrregularity[EnumProcessIrregularity["CapabilityUnavailable"] = 0] = "CapabilityUnavailable";
+    /**
+     * A process irregularity has been detected.
+     */
+    EnumProcessIrregularity[EnumProcessIrregularity["Detected"] = 1] = "Detected";
+    /**
+     * There was no process irregularity detected.
+     */
+    EnumProcessIrregularity[EnumProcessIrregularity["NotDetected"] = 2] = "NotDetected";
+    /**
+     * A statement about the process irregularity is to
+     * be expected.
+     */
+    EnumProcessIrregularity[EnumProcessIrregularity["NotYetDetermined"] = 3] = "NotYetDetermined";
+})(EnumProcessIrregularity = exports.EnumProcessIrregularity || (exports.EnumProcessIrregularity = {}));
 //# sourceMappingURL=enum_process_irregularity.js.map

package/dist/enum_tool_life_indication.d.ts

@@ -1,67 +1,67 @@
-/**
- * |           |                                                  |
- * |-----------|--------------------------------------------------|
- * | namespace |http://opcfoundation.org/UA/MachineTool/          |
- * | nodeClass |DataType                                          |
- * | name      |10:ToolLifeIndication                             |
- * | isAbstract|false                                             |
- */
-export declare enum EnumToolLifeIndication {
-    /**
-     * The tool life indicates the time the tool has
-     * been in use or can still be used. The value shall
-     * be given in hours (decimal value).
-     */
-    Time = 0,
-    /**
-     * The tool life indicates the total number of parts
-     * that have been produced or can still be produced
-     * using the tool. The unit shall be “one”.
-     */
-    NumberOfParts = 1,
-    /**
-     * The tool life indicates counting the process
-     * steps this tool has been used or can still be
-     * used (for example usages of a punching tool). The
-     * unit shall be “one”.
-     */
-    NumberOfUsages = 2,
-    /**
-     * The tool life indicates the sum of the feed path
-     * covered by the tool and the workpiece relative to
-     * each other during machining. This value shall be
-     * given in one of the following units: millimetres,
-     * metres, kilometres.
-     */
-    Feed_Distance = 3,
-    /**
-     * The tool life indicates the sum of the lengths
-     * that the cutting knife works in the workpiece. If
-     * the knife is not fixed, this includes the lengths
-     * of the arc segments of the knife path. This value
-     * shall be given in one of the following units:
-     * millimetres, metres, kilometres. This value is
-     * likely only available for serial production with
-     * clearly defined machining conditions.
-     */
-    Cutting_Distance = 4,
-    /**
-     * The tool life indicates the abraded length of the
-     * tool. This value shall be given in one of the
-     * following units: micrometres, millimetres,
-     * metres, kilometres.
-     */
-    Length = 5,
-    /**
-     * The tool life indicates the abraded diameter of
-     * the tool. This value shall be given in one of the
-     * following units: micrometres, millimetres,
-     * metres, kilometres.
-     */
-    Diameter = 6,
-    /**
-     * The tool life is indicated in a way not covered
-     * by the remaining enum values.
-     */
-    Other = 7
-}
+/**
+ * |           |                                                  |
+ * |-----------|--------------------------------------------------|
+ * | namespace |http://opcfoundation.org/UA/MachineTool/          |
+ * | nodeClass |DataType                                          |
+ * | name      |10:ToolLifeIndication                             |
+ * | isAbstract|false                                             |
+ */
+export declare enum EnumToolLifeIndication {
+    /**
+     * The tool life indicates the time the tool has
+     * been in use or can still be used. The value shall
+     * be given in hours (decimal value).
+     */
+    Time = 0,
+    /**
+     * The tool life indicates the total number of parts
+     * that have been produced or can still be produced
+     * using the tool. The unit shall be “one”.
+     */
+    NumberOfParts = 1,
+    /**
+     * The tool life indicates counting the process
+     * steps this tool has been used or can still be
+     * used (for example usages of a punching tool). The
+     * unit shall be “one”.
+     */
+    NumberOfUsages = 2,
+    /**
+     * The tool life indicates the sum of the feed path
+     * covered by the tool and the workpiece relative to
+     * each other during machining. This value shall be
+     * given in one of the following units: millimetres,
+     * metres, kilometres.
+     */
+    Feed_Distance = 3,
+    /**
+     * The tool life indicates the sum of the lengths
+     * that the cutting knife works in the workpiece. If
+     * the knife is not fixed, this includes the lengths
+     * of the arc segments of the knife path. This value
+     * shall be given in one of the following units:
+     * millimetres, metres, kilometres. This value is
+     * likely only available for serial production with
+     * clearly defined machining conditions.
+     */
+    Cutting_Distance = 4,
+    /**
+     * The tool life indicates the abraded length of the
+     * tool. This value shall be given in one of the
+     * following units: micrometres, millimetres,
+     * metres, kilometres.
+     */
+    Length = 5,
+    /**
+     * The tool life indicates the abraded diameter of
+     * the tool. This value shall be given in one of the
+     * following units: micrometres, millimetres,
+     * metres, kilometres.
+     */
+    Diameter = 6,
+    /**
+     * The tool life is indicated in a way not covered
+     * by the remaining enum values.
+     */
+    Other = 7
+}