node-opcua-nodeset-cnc 2.97.0 → 2.98.1

package/dist/ua_cnc_channel.d.ts

@@ -1,264 +1,264 @@
-import { UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { EUInformation } from "node-opcua-data-access";
-import { UInt32, UAString } from "node-opcua-basic-types";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item";
-import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
-import { EnumCncOperationMode } from "./enum_cnc_operation_mode";
-import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
-import { EnumCncChannelStatus } from "./enum_cnc_channel_status";
-import { DTCncPosition } from "./dt_cnc_position";
-import { UACncPositionVariable } from "./ua_cnc_position_variable";
-export interface UACncChannel_actFeedrate<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
-    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
-    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
-}
-export interface UACncChannel_actJogIncrement<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
-    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
-    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
-}
-export interface UACncChannel_actOverride<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
-    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
-    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
-}
-export interface UACncChannel_cmdFeedrate<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
-    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
-    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
-}
-export interface UACncChannel_cmdOverride<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
-    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
-    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
-}
-export interface UACncChannel_dryRunFeed<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
-    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
-    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
-}
-/**
- * CNC channel component.
- *
- * |                |                                                  |
- * |----------------|--------------------------------------------------|
- * |namespace       |http://opcfoundation.org/UA/CNC                   |
- * |nodeClass       |ObjectType                                        |
- * |typedDefinition |11:CncChannelType ns=11;i=1002                    |
- * |isAbstract      |false                                             |
- */
-export interface UACncChannel_Base extends UACncComponent_Base {
-    /**
-     * actFeedrate
-     * Feedrate actual value.
-     */
-    actFeedrate: UACncChannel_actFeedrate<number, DataType.Double>;
-    /**
-     * actGFunctions
-     * Array of active G functions; there can be several
-     * G functions active at a time (modal and non-modal
-     * G functions).
-     */
-    actGFunctions: UADataItem<UInt32[], DataType.UInt32>;
-    /**
-     * actJogIncrement
-     * Active JOG increment.
-     */
-    actJogIncrement: UACncChannel_actJogIncrement<number, DataType.Double>;
-    /**
-     * actMainProgramFile
-     * Path of active CNC main program.
-     */
-    actMainProgramFile: UADataItem<UAString, DataType.String>;
-    /**
-     * actMainProgramFileOffset
-     * File offset of active CNC main program file.
-     */
-    actMainProgramFileOffset?: UADataItem<UInt32, DataType.UInt32>;
-    /**
-     * actMainProgramLine
-     * Line number of active CNC main program.
-     */
-    actMainProgramLine?: UADataItem<UAString, DataType.String>;
-    /**
-     * actMainProgramName
-     * Name of active CNC main program.
-     */
-    actMainProgramName: UADataItem<UAString, DataType.String>;
-    /**
-     * actMFunctions
-     * Array of active M functions: there can be several
-     * M functions active at a time (modal and non-modal
-     * M functions).
-     */
-    actMFunctions: UADataItem<UInt32[], DataType.UInt32>;
-    /**
-     * actModalOffsetFunction
-     * Active zero offset function.
-     */
-    actModalOffsetFunction: UADataItem<UInt32, DataType.UInt32>;
-    /**
-     * actOperationMode
-     * Channel's active mode of operation.
-     */
-    actOperationMode: UADataItem<EnumCncOperationMode, DataType.Int32>;
-    /**
-     * actOverride
-     * Axis override actual value.
-     */
-    actOverride: UACncChannel_actOverride<number, DataType.Double>;
-    /**
-     * actProgramBlock
-     * Block of lines containing the previous, actual
-     * and subsequent lines of a CNC part program.
-     */
-    actProgramBlock: UADataItem<UAString[], DataType.String>;
-    /**
-     * actProgramFile
-     * Path of active CNC program file (main or
-     * subprogram).
-     */
-    actProgramFile: UADataItem<UAString, DataType.String>;
-    /**
-     * actProgramFileOffset
-     * File offset of active CNC program file (main or
-     * subprogram).
-     */
-    actProgramFileOffset?: UADataItem<UInt32, DataType.UInt32>;
-    /**
-     * actProgramLine
-     * Line number of active CNC program (main or
-     * subprogram).
-     */
-    actProgramLine?: UADataItem<UAString, DataType.String>;
-    /**
-     * actProgramName
-     * Name of active CNC program (main or subprogram).
-     */
-    actProgramName: UADataItem<UAString, DataType.String>;
-    /**
-     * actProgramStatus
-     * Active channel program status
-     */
-    actProgramStatus: UADataItem<EnumCncChannelProgramStatus, DataType.Int32>;
-    /**
-     * actStatus
-     * Active status of channel.
-     */
-    actStatus: UADataItem<EnumCncChannelStatus, DataType.Int32>;
-    /**
-     * blockMode
-     * Block mode status (true in case of block mode is
-     * active, else false).
-     */
-    blockMode: UADataItem<boolean, DataType.Boolean>;
-    /**
-     * cmdFeedrate
-     * Feedrate setpoint value.
-     */
-    cmdFeedrate: UACncChannel_cmdFeedrate<number, DataType.Double>;
-    /**
-     * cmdOperationMode
-     * Channel’s mode of operation setpoint value.
-     */
-    cmdOperationMode: UADataItem<EnumCncOperationMode, DataType.Int32>;
-    /**
-     * cmdOverride
-     * Override setpoint value.
-     */
-    cmdOverride: UACncChannel_cmdOverride<number, DataType.Double>;
-    /**
-     * dryRunFeed
-     * Test feedrate.
-     */
-    dryRunFeed: UACncChannel_dryRunFeed<number, DataType.Double>;
-    /**
-     * feedHold
-     * Feed status (true in case of feed hold active,
-     * else false).
-     */
-    feedHold: UADataItem<boolean, DataType.Boolean>;
-    /**
-     * id
-     * Unique numeric channel identifier.
-     */
-    id: UAProperty<UInt32, DataType.UInt32>;
-    /**
-     * posTcpBcsA
-     * Actual position of the tool center point in
-     * machine’s Cartesian base coordinate system.
-     */
-    posTcpBcsA: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpBcsB
-     * Actual position of the tool center point in
-     * machine’s Cartesian base coordinate system.
-     */
-    posTcpBcsB: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpBcsC
-     * Actual position of the tool center point in
-     * machine’s Cartesian base coordinate system.
-     */
-    posTcpBcsC: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpBcsX
-     * Actual position of the tool center point in
-     * machine’s Cartesian base coordinate system.
-     */
-    posTcpBcsX: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpBcsY
-     * Actual position of the tool center point in
-     * machine’s Cartesian base coordinate system.
-     */
-    posTcpBcsY: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpBcsZ
-     * Actual position of the tool center point in
-     * machine’s Cartesian base coordinate system.
-     */
-    posTcpBcsZ: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpWcsA
-     * Actual position of the tool center point in
-     * machine’s Cartesian workpiece coordinate system.
-     */
-    posTcpWcsA: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpWcsB
-     * Actual position of the tool center point in
-     * machine’s Cartesian workpiece coordinate system.
-     */
-    posTcpWcsB: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpWcsC
-     * Actual position of the tool center point in
-     * machine’s Cartesian workpiece coordinate system.
-     */
-    posTcpWcsC: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpWcsX
-     * Actual position of the tool center point in
-     * machine’s Cartesian workpiece coordinate system.
-     */
-    posTcpWcsX: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpWcsY
-     * Actual position of the tool center point in
-     * machine’s Cartesian workpiece coordinate system.
-     */
-    posTcpWcsY: UACncPositionVariable<DTCncPosition>;
-    /**
-     * posTcpWcsZ
-     * Actual position of the tool center point in
-     * machine’s Cartesian workpiece coordinate system.
-     */
-    posTcpWcsZ: UACncPositionVariable<DTCncPosition>;
-    /**
-     * toolId
-     * ID of active tool; returns zero if no tool is
-     * present.
-     */
-    toolId: UADataItem<UInt32, DataType.UInt32>;
-}
-export interface UACncChannel extends UACncComponent, UACncChannel_Base {
-}
+import { UAProperty } from "node-opcua-address-space-base";
+import { DataType } from "node-opcua-variant";
+import { EUInformation } from "node-opcua-data-access";
+import { UInt32, UAString } from "node-opcua-basic-types";
+import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item";
+import { DTRange } from "node-opcua-nodeset-ua/source/dt_range";
+import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item";
+import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
+import { EnumCncOperationMode } from "./enum_cnc_operation_mode";
+import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
+import { EnumCncChannelStatus } from "./enum_cnc_channel_status";
+import { DTCncPosition } from "./dt_cnc_position";
+import { UACncPositionVariable } from "./ua_cnc_position_variable";
+export interface UACncChannel_actFeedrate<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
+    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
+    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
+}
+export interface UACncChannel_actJogIncrement<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
+    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
+    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
+}
+export interface UACncChannel_actOverride<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
+    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
+    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
+}
+export interface UACncChannel_cmdFeedrate<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
+    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
+    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
+}
+export interface UACncChannel_cmdOverride<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
+    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
+    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
+}
+export interface UACncChannel_dryRunFeed<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
+    engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
+    euRange: UAProperty<DTRange, DataType.ExtensionObject>;
+}
+/**
+ * CNC channel component.
+ *
+ * |                |                                                  |
+ * |----------------|--------------------------------------------------|
+ * |namespace       |http://opcfoundation.org/UA/CNC                   |
+ * |nodeClass       |ObjectType                                        |
+ * |typedDefinition |11:CncChannelType ns=11;i=1002                    |
+ * |isAbstract      |false                                             |
+ */
+export interface UACncChannel_Base extends UACncComponent_Base {
+    /**
+     * actFeedrate
+     * Feedrate actual value.
+     */
+    actFeedrate: UACncChannel_actFeedrate<number, DataType.Double>;
+    /**
+     * actGFunctions
+     * Array of active G functions; there can be several
+     * G functions active at a time (modal and non-modal
+     * G functions).
+     */
+    actGFunctions: UADataItem<UInt32[], DataType.UInt32>;
+    /**
+     * actJogIncrement
+     * Active JOG increment.
+     */
+    actJogIncrement: UACncChannel_actJogIncrement<number, DataType.Double>;
+    /**
+     * actMainProgramFile
+     * Path of active CNC main program.
+     */
+    actMainProgramFile: UADataItem<UAString, DataType.String>;
+    /**
+     * actMainProgramFileOffset
+     * File offset of active CNC main program file.
+     */
+    actMainProgramFileOffset?: UADataItem<UInt32, DataType.UInt32>;
+    /**
+     * actMainProgramLine
+     * Line number of active CNC main program.
+     */
+    actMainProgramLine?: UADataItem<UAString, DataType.String>;
+    /**
+     * actMainProgramName
+     * Name of active CNC main program.
+     */
+    actMainProgramName: UADataItem<UAString, DataType.String>;
+    /**
+     * actMFunctions
+     * Array of active M functions: there can be several
+     * M functions active at a time (modal and non-modal
+     * M functions).
+     */
+    actMFunctions: UADataItem<UInt32[], DataType.UInt32>;
+    /**
+     * actModalOffsetFunction
+     * Active zero offset function.
+     */
+    actModalOffsetFunction: UADataItem<UInt32, DataType.UInt32>;
+    /**
+     * actOperationMode
+     * Channel's active mode of operation.
+     */
+    actOperationMode: UADataItem<EnumCncOperationMode, DataType.Int32>;
+    /**
+     * actOverride
+     * Axis override actual value.
+     */
+    actOverride: UACncChannel_actOverride<number, DataType.Double>;
+    /**
+     * actProgramBlock
+     * Block of lines containing the previous, actual
+     * and subsequent lines of a CNC part program.
+     */
+    actProgramBlock: UADataItem<UAString[], DataType.String>;
+    /**
+     * actProgramFile
+     * Path of active CNC program file (main or
+     * subprogram).
+     */
+    actProgramFile: UADataItem<UAString, DataType.String>;
+    /**
+     * actProgramFileOffset
+     * File offset of active CNC program file (main or
+     * subprogram).
+     */
+    actProgramFileOffset?: UADataItem<UInt32, DataType.UInt32>;
+    /**
+     * actProgramLine
+     * Line number of active CNC program (main or
+     * subprogram).
+     */
+    actProgramLine?: UADataItem<UAString, DataType.String>;
+    /**
+     * actProgramName
+     * Name of active CNC program (main or subprogram).
+     */
+    actProgramName: UADataItem<UAString, DataType.String>;
+    /**
+     * actProgramStatus
+     * Active channel program status
+     */
+    actProgramStatus: UADataItem<EnumCncChannelProgramStatus, DataType.Int32>;
+    /**
+     * actStatus
+     * Active status of channel.
+     */
+    actStatus: UADataItem<EnumCncChannelStatus, DataType.Int32>;
+    /**
+     * blockMode
+     * Block mode status (true in case of block mode is
+     * active, else false).
+     */
+    blockMode: UADataItem<boolean, DataType.Boolean>;
+    /**
+     * cmdFeedrate
+     * Feedrate setpoint value.
+     */
+    cmdFeedrate: UACncChannel_cmdFeedrate<number, DataType.Double>;
+    /**
+     * cmdOperationMode
+     * Channel’s mode of operation setpoint value.
+     */
+    cmdOperationMode: UADataItem<EnumCncOperationMode, DataType.Int32>;
+    /**
+     * cmdOverride
+     * Override setpoint value.
+     */
+    cmdOverride: UACncChannel_cmdOverride<number, DataType.Double>;
+    /**
+     * dryRunFeed
+     * Test feedrate.
+     */
+    dryRunFeed: UACncChannel_dryRunFeed<number, DataType.Double>;
+    /**
+     * feedHold
+     * Feed status (true in case of feed hold active,
+     * else false).
+     */
+    feedHold: UADataItem<boolean, DataType.Boolean>;
+    /**
+     * id
+     * Unique numeric channel identifier.
+     */
+    id: UAProperty<UInt32, DataType.UInt32>;
+    /**
+     * posTcpBcsA
+     * Actual position of the tool center point in
+     * machine’s Cartesian base coordinate system.
+     */
+    posTcpBcsA: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpBcsB
+     * Actual position of the tool center point in
+     * machine’s Cartesian base coordinate system.
+     */
+    posTcpBcsB: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpBcsC
+     * Actual position of the tool center point in
+     * machine’s Cartesian base coordinate system.
+     */
+    posTcpBcsC: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpBcsX
+     * Actual position of the tool center point in
+     * machine’s Cartesian base coordinate system.
+     */
+    posTcpBcsX: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpBcsY
+     * Actual position of the tool center point in
+     * machine’s Cartesian base coordinate system.
+     */
+    posTcpBcsY: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpBcsZ
+     * Actual position of the tool center point in
+     * machine’s Cartesian base coordinate system.
+     */
+    posTcpBcsZ: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpWcsA
+     * Actual position of the tool center point in
+     * machine’s Cartesian workpiece coordinate system.
+     */
+    posTcpWcsA: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpWcsB
+     * Actual position of the tool center point in
+     * machine’s Cartesian workpiece coordinate system.
+     */
+    posTcpWcsB: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpWcsC
+     * Actual position of the tool center point in
+     * machine’s Cartesian workpiece coordinate system.
+     */
+    posTcpWcsC: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpWcsX
+     * Actual position of the tool center point in
+     * machine’s Cartesian workpiece coordinate system.
+     */
+    posTcpWcsX: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpWcsY
+     * Actual position of the tool center point in
+     * machine’s Cartesian workpiece coordinate system.
+     */
+    posTcpWcsY: UACncPositionVariable<DTCncPosition>;
+    /**
+     * posTcpWcsZ
+     * Actual position of the tool center point in
+     * machine’s Cartesian workpiece coordinate system.
+     */
+    posTcpWcsZ: UACncPositionVariable<DTCncPosition>;
+    /**
+     * toolId
+     * ID of active tool; returns zero if no tool is
+     * present.
+     */
+    toolId: UADataItem<UInt32, DataType.UInt32>;
+}
+export interface UACncChannel extends UACncComponent, UACncChannel_Base {
+}

package/dist/ua_cnc_channel.js

@@ -1,3 +1,3 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
+"use strict";
+Object.defineProperty(exports, "__esModule", { value: true });
 //# sourceMappingURL=ua_cnc_channel.js.map

package/dist/ua_cnc_channel_list.d.ts

@@ -1,15 +1,15 @@
-import { UAObject } from "node-opcua-address-space-base";
-/**
- * List of CNC channel objects.
- *
- * |                |                                                  |
- * |----------------|--------------------------------------------------|
- * |namespace       |http://opcfoundation.org/UA/CNC                   |
- * |nodeClass       |ObjectType                                        |
- * |typedDefinition |11:CncChannelListType ns=11;i=1010                |
- * |isAbstract      |false                                             |
- */
-export interface UACncChannelList_Base {
-}
-export interface UACncChannelList extends UAObject, UACncChannelList_Base {
-}
+import { UAObject } from "node-opcua-address-space-base";
+/**
+ * List of CNC channel objects.
+ *
+ * |                |                                                  |
+ * |----------------|--------------------------------------------------|
+ * |namespace       |http://opcfoundation.org/UA/CNC                   |
+ * |nodeClass       |ObjectType                                        |
+ * |typedDefinition |11:CncChannelListType ns=11;i=1010                |
+ * |isAbstract      |false                                             |
+ */
+export interface UACncChannelList_Base {
+}
+export interface UACncChannelList extends UAObject, UACncChannelList_Base {
+}

package/dist/ua_cnc_channel_list.js

@@ -1,3 +1,3 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
+"use strict";
+Object.defineProperty(exports, "__esModule", { value: true });
 //# sourceMappingURL=ua_cnc_channel_list.js.map

package/dist/ua_cnc_component.d.ts

@@ -1,16 +1,16 @@
-import { UAObject } from "node-opcua-address-space-base";
-/**
- * Base component for soft- or hardware elements of
- * a CNC system.
- *
- * |                |                                                  |
- * |----------------|--------------------------------------------------|
- * |namespace       |http://opcfoundation.org/UA/CNC                   |
- * |nodeClass       |ObjectType                                        |
- * |typedDefinition |11:CncComponentType ns=11;i=1001                  |
- * |isAbstract      |true                                              |
- */
-export interface UACncComponent_Base {
-}
-export interface UACncComponent extends UAObject, UACncComponent_Base {
-}
+import { UAObject } from "node-opcua-address-space-base";
+/**
+ * Base component for soft- or hardware elements of
+ * a CNC system.
+ *
+ * |                |                                                  |
+ * |----------------|--------------------------------------------------|
+ * |namespace       |http://opcfoundation.org/UA/CNC                   |
+ * |nodeClass       |ObjectType                                        |
+ * |typedDefinition |11:CncComponentType ns=11;i=1001                  |
+ * |isAbstract      |true                                              |
+ */
+export interface UACncComponent_Base {
+}
+export interface UACncComponent extends UAObject, UACncComponent_Base {
+}

package/dist/ua_cnc_component.js

@@ -1,3 +1,3 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
+"use strict";
+Object.defineProperty(exports, "__esModule", { value: true });
 //# sourceMappingURL=ua_cnc_component.js.map