node-opcua-nodeset-cnc 2.170.1 → 2.172.0

package/dist/dt_cnc_position.d.ts

@@ -1,5 +1,5 @@
-import { ExtensionObject } from "node-opcua-extension-object";
-import { DTStructure } from "node-opcua-nodeset-ua/dist/dt_structure";
+import type { ExtensionObject } from "node-opcua-extension-object";
+import type { DTStructure } from "node-opcua-nodeset-ua/dist/dt_structure";
 /**
  * Structure of position elements.
  *

package/dist/dt_cnc_position.js.map

@@ -1 +1 @@
-{"version":3,"file":"dt_cnc_position.js","sourceRoot":"","sources":["../source/dt_cnc_position.ts"],"names":[],"mappings":";;AAqByE,CAAC"}
+{"version":3,"file":"dt_cnc_position.js","sourceRoot":"","sources":["../source/dt_cnc_position.ts"],"names":[],"mappings":";;AAuByE,CAAC"}

package/dist/ua_cnc_alarm.d.ts

@@ -1,7 +1,7 @@
-import { UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { UAString } from "node-opcua-basic-types";
-import { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/dist/ua_discrete_alarm";
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { UAString } from "node-opcua-basic-types";
+import type { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/dist/ua_discrete_alarm";
+import type { DataType } from "node-opcua-variant";
 /**
  * Event transmitting Alarms within a CNC system.
  *

package/dist/ua_cnc_axis.d.ts

@@ -1,13 +1,13 @@
-import { UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { EUInformation } from "node-opcua-data-access";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
-import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
-import { EnumCncAxisStatus } from "./enum_cnc_axis_status";
-import { DTCncPosition } from "./dt_cnc_position";
-import { UACncPositionVariable } from "./ua_cnc_position_variable";
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncAxisStatus } from "./enum_cnc_axis_status";
+import type { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
 export interface UACncAxis_zeroOffset<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
     engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
     euRange: UAProperty<DTRange, DataType.ExtensionObject>;

package/dist/ua_cnc_axis_list.d.ts

@@ -1,4 +1,4 @@
-import { UAObject } from "node-opcua-address-space-base";
+import type { UAObject } from "node-opcua-address-space-base";
 /**
  * List of CNC axis objects.
  *

package/dist/ua_cnc_channel.d.ts

@@ -1,16 +1,16 @@
-import { UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { EUInformation } from "node-opcua-data-access";
-import { UInt32, UAString } from "node-opcua-basic-types";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
-import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
-import { EnumCncOperationMode } from "./enum_cnc_operation_mode";
-import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
-import { EnumCncChannelStatus } from "./enum_cnc_channel_status";
-import { DTCncPosition } from "./dt_cnc_position";
-import { UACncPositionVariable } from "./ua_cnc_position_variable";
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { UAString, UInt32 } from "node-opcua-basic-types";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
+import type { EnumCncChannelStatus } from "./enum_cnc_channel_status";
+import type { EnumCncOperationMode } from "./enum_cnc_operation_mode";
+import type { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
 export interface UACncChannel_actFeedrate<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
     engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
     euRange: UAProperty<DTRange, DataType.ExtensionObject>;

package/dist/ua_cnc_channel_list.d.ts

@@ -1,4 +1,4 @@
-import { UAObject } from "node-opcua-address-space-base";
+import type { UAObject } from "node-opcua-address-space-base";
 /**
  * List of CNC channel objects.
  *

package/dist/ua_cnc_component.d.ts

@@ -1,15 +1,4 @@
-import { UAObject } from "node-opcua-address-space-base";
-/**
- * Base component for soft- or hardware elements of
- * a CNC system.
- *
- * |                |                                                            |
- * |----------------|------------------------------------------------------------|
- * |namespace       |http://opcfoundation.org/UA/CNC                             |
- * |nodeClass       |ObjectType                                                  |
- * |typedDefinition |CncComponentType i=1001                                     |
- * |isAbstract      |true                                                        |
- */
+import type { UAObject } from "node-opcua-address-space-base";
 export interface UACncComponent_Base {
 }
 export interface UACncComponent extends UAObject, UACncComponent_Base {

package/dist/ua_cnc_drive.d.ts

@@ -1,11 +1,11 @@
-import { UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { EUInformation } from "node-opcua-data-access";
-import { NodeId } from "node-opcua-nodeid";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
-import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { EUInformation } from "node-opcua-data-access";
+import type { NodeId } from "node-opcua-nodeid";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+import type { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
 export interface UACncDrive_actLoad<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
     engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
     euRange: UAProperty<DTRange, DataType.ExtensionObject>;

package/dist/ua_cnc_interface.d.ts

@@ -1,9 +1,9 @@
-import { UAObject, UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { UAString } from "node-opcua-basic-types";
-import { UACncAxisList } from "./ua_cnc_axis_list";
-import { UACncChannelList } from "./ua_cnc_channel_list";
-import { UACncSpindleList } from "./ua_cnc_spindle_list";
+import type { UAObject, UAProperty } from "node-opcua-address-space-base";
+import type { UAString } from "node-opcua-basic-types";
+import type { DataType } from "node-opcua-variant";
+import type { UACncAxisList } from "./ua_cnc_axis_list";
+import type { UACncChannelList } from "./ua_cnc_channel_list";
+import type { UACncSpindleList } from "./ua_cnc_spindle_list";
 /**
  * Entry point to CNC data interface.
  *

package/dist/ua_cnc_message.d.ts

@@ -1,4 +1,4 @@
-import { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/dist/ua_base_event";
+import type { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/dist/ua_base_event";
 /**
  * Event transmitting simple information messages.
  *

package/dist/ua_cnc_position_variable.d.ts

@@ -1,9 +1,9 @@
-import { UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { EUInformation } from "node-opcua-data-access";
-import { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/dist/ua_base_data_variable";
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
-import { DTCncPosition } from "./dt_cnc_position";
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/dist/ua_base_data_variable";
+import type { DataType } from "node-opcua-variant";
+import type { DTCncPosition } from "./dt_cnc_position";
 /**
  * Group of position values.
  *

package/dist/ua_cnc_spindle.d.ts

@@ -1,15 +1,15 @@
-import { UAProperty } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { EUInformation } from "node-opcua-data-access";
-import { UInt32 } from "node-opcua-basic-types";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
-import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
-import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status";
-import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction";
-import { DTCncPosition } from "./dt_cnc_position";
-import { UACncPositionVariable } from "./ua_cnc_position_variable";
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { UInt32 } from "node-opcua-basic-types";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncSpindleStatus } from "./enum_cnc_spindle_status";
+import type { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction";
+import type { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
 export interface UACncSpindle_actSpeed<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
     engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
     euRange: UAProperty<DTRange, DataType.ExtensionObject>;

package/dist/ua_cnc_spindle_list.d.ts

@@ -1,16 +1,16 @@
-import { UAObject } from "node-opcua-address-space-base";
-import { DataType } from "node-opcua-variant";
-import { NodeId } from "node-opcua-nodeid";
-import { UInt32, UAString } from "node-opcua-basic-types";
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
-import { UACncSpindle, UACncSpindle_actSpeed, UACncSpindle_cmdSpeed } from "./ua_cnc_spindle";
-import { EnumCncOperationMode } from "./enum_cnc_operation_mode";
-import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
-import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status";
-import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction";
-import { DTCncPosition } from "./dt_cnc_position";
-import { UACncPositionVariable } from "./ua_cnc_position_variable";
+import type { UAObject } from "node-opcua-address-space-base";
+import type { UAString, UInt32 } from "node-opcua-basic-types";
+import type { NodeId } from "node-opcua-nodeid";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
+import type { EnumCncOperationMode } from "./enum_cnc_operation_mode";
+import type { EnumCncSpindleStatus } from "./enum_cnc_spindle_status";
+import type { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
+import type { UACncSpindle, UACncSpindle_actSpeed, UACncSpindle_cmdSpeed } from "./ua_cnc_spindle";
 export interface UACncSpindleList_$CncSpindle$ extends Omit<UACncSpindle, "actChannel" | "actGear" | "actLoad" | "actOverride" | "actPower" | "actSpeed" | "actStatus" | "actTorque" | "actTurnDirection" | "anglePos" | "cmdGear" | "cmdOverride" | "cmdSpeed" | "cmdTorque" | "isInactive" | "isVirtual"> {
     /**
      * actChannel

package/package.json

@@ -1,6 +1,6 @@
 {
     "name": "node-opcua-nodeset-cnc",
-    "version": "2.170.1",
+    "version": "2.172.0",
     "description": "pure nodejs OPCUA SDK - module node-opcua-nodeset-cnc",
     "main": "dist/index.js",
     "types": "dist/index.d.ts",
@@ -11,15 +11,15 @@
     "author": "Etienne Rossignon <etienne.rossignon@sterfive.com>",
     "license": "MIT",
     "dependencies": {
-        "node-opcua-address-space-base": "2.170.1",
-        "node-opcua-basic-types": "2.169.0",
-        "node-opcua-data-access": "2.170.0",
-        "node-opcua-data-model": "2.170.0",
-        "node-opcua-extension-object": "2.169.0",
-        "node-opcua-nodeid": "2.169.0",
-        "node-opcua-nodeset-ua": "2.170.1",
-        "node-opcua-status-code": "2.169.0",
-        "node-opcua-variant": "2.170.0"
+        "node-opcua-address-space-base": "2.172.0",
+        "node-opcua-basic-types": "2.172.0",
+        "node-opcua-data-access": "2.172.0",
+        "node-opcua-data-model": "2.172.0",
+        "node-opcua-extension-object": "2.172.0",
+        "node-opcua-nodeid": "2.172.0",
+        "node-opcua-nodeset-ua": "2.172.0",
+        "node-opcua-status-code": "2.172.0",
+        "node-opcua-variant": "2.172.0"
     },
     "files": [
         "dist",
@@ -38,5 +38,5 @@
         "internet of things"
     ],
     "homepage": "http://node-opcua.github.io/",
-    "gitHead": "40629feaff284ba70596149e58b3cc2a7a0e8f68"
+    "gitHead": "dfe9993a93b5c3897825e898b5f07b25952c7f45"
 }

package/source/dt_cnc_position.ts

@@ -1,6 +1,8 @@
+import type { ExtensionObject } from "node-opcua-extension-object";
+import type { DTStructure } from "node-opcua-nodeset-ua/dist/dt_structure";
+
 // ----- this file has been automatically generated - do not edit
-import { ExtensionObject } from "node-opcua-extension-object"
-import { DTStructure } from "node-opcua-nodeset-ua/dist/dt_structure"
+
 /**
  * Structure of position elements.
  *

package/source/index.ts

@@ -16,4 +16,4 @@ export * from "./ua_cnc_interface";
 export * from "./ua_cnc_message";
 export * from "./ua_cnc_position_variable";
 export * from "./ua_cnc_spindle";
-export * from "./ua_cnc_spindle_list";
+export * from "./ua_cnc_spindle_list";

package/source/ua_cnc_alarm.ts

@@ -1,8 +1,10 @@
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { UAString } from "node-opcua-basic-types";
+import type { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/dist/ua_discrete_alarm";
+import type { DataType } from "node-opcua-variant";
+
 // ----- this file has been automatically generated - do not edit
-import { UAProperty } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { UAString } from "node-opcua-basic-types"
-import { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/dist/ua_discrete_alarm"
+
 /**
  * Event transmitting Alarms within a CNC system.
  *
@@ -33,5 +35,4 @@ export interface UACncAlarm_Base extends UADiscreteAlarm_Base {
      */
     helpSource?: UAProperty<UAString, DataType.String>;
 }
-export interface UACncAlarm extends UADiscreteAlarm, UACncAlarm_Base {
-}
+export interface UACncAlarm extends UADiscreteAlarm, UACncAlarm_Base {}

package/source/ua_cnc_axis.ts

@@ -1,14 +1,17 @@
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncAxisStatus } from "./enum_cnc_axis_status";
+import type { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
+
 // ----- this file has been automatically generated - do not edit
-import { UAProperty } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { EUInformation } from "node-opcua-data-access"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
-import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive"
-import { EnumCncAxisStatus } from "./enum_cnc_axis_status"
-import { DTCncPosition } from "./dt_cnc_position"
-import { UACncPositionVariable } from "./ua_cnc_position_variable"
+
 export interface UACncAxis_zeroOffset<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits"|"euRange"> { // Variable
       engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
       euRange: UAProperty<DTRange, DataType.ExtensionObject>;
@@ -59,5 +62,4 @@ export interface UACncAxis_Base extends UACncDrive_Base {
      */
     zeroOffset: UACncAxis_zeroOffset<number, DataType.Double>;
 }
-export interface UACncAxis extends UACncDrive, UACncAxis_Base {
-}
+export interface UACncAxis extends UACncDrive, UACncAxis_Base {}

package/source/ua_cnc_axis_list.ts

@@ -1,5 +1,6 @@
+import type { UAObject } from "node-opcua-address-space-base";
+
 // ----- this file has been automatically generated - do not edit
-import { UAObject } from "node-opcua-address-space-base"
 
 /**
  * List of CNC axis objects.
@@ -11,8 +12,8 @@ import { UAObject } from "node-opcua-address-space-base"
  * |typedDefinition |CncAxisListType i=1008                                      |
  * |isAbstract      |false                                                       |
  */
+// biome-ignore lint/suspicious/noEmptyInterface: forward-compatible placeholder for OPC-UA generated types
 export interface UACncAxisList_Base {
    // PlaceHolder for $CncAxis$
 }
-export interface UACncAxisList extends UAObject, UACncAxisList_Base {
-}
+export interface UACncAxisList extends UAObject, UACncAxisList_Base {}

package/source/ua_cnc_channel.ts

@@ -1,17 +1,20 @@
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { UAString, UInt32 } from "node-opcua-basic-types";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
+import type { EnumCncChannelStatus } from "./enum_cnc_channel_status";
+import type { EnumCncOperationMode } from "./enum_cnc_operation_mode";
+import type { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
+
 // ----- this file has been automatically generated - do not edit
-import { UAProperty } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { EUInformation } from "node-opcua-data-access"
-import { UInt32, UAString } from "node-opcua-basic-types"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
-import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component"
-import { EnumCncOperationMode } from "./enum_cnc_operation_mode"
-import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status"
-import { EnumCncChannelStatus } from "./enum_cnc_channel_status"
-import { DTCncPosition } from "./dt_cnc_position"
-import { UACncPositionVariable } from "./ua_cnc_position_variable"
+
 export interface UACncChannel_actFeedrate<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits"|"euRange"> { // Variable
       engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
       euRange: UAProperty<DTRange, DataType.ExtensionObject>;
@@ -263,5 +266,4 @@ export interface UACncChannel_Base extends UACncComponent_Base {
      */
     toolId: UADataItem<UInt32, DataType.UInt32>;
 }
-export interface UACncChannel extends UACncComponent, UACncChannel_Base {
-}
+export interface UACncChannel extends UACncComponent, UACncChannel_Base {}

package/source/ua_cnc_channel_list.ts

@@ -1,5 +1,6 @@
+import type { UAObject } from "node-opcua-address-space-base";
+
 // ----- this file has been automatically generated - do not edit
-import { UAObject } from "node-opcua-address-space-base"
 
 /**
  * List of CNC channel objects.
@@ -11,8 +12,8 @@ import { UAObject } from "node-opcua-address-space-base"
  * |typedDefinition |CncChannelListType i=1010                                   |
  * |isAbstract      |false                                                       |
  */
+// biome-ignore lint/suspicious/noEmptyInterface: forward-compatible placeholder for OPC-UA generated types
 export interface UACncChannelList_Base {
    // PlaceHolder for $CncChannel$
 }
-export interface UACncChannelList extends UAObject, UACncChannelList_Base {
-}
+export interface UACncChannelList extends UAObject, UACncChannelList_Base {}

package/source/ua_cnc_component.ts

@@ -1,17 +1,7 @@
+import type { UAObject } from "node-opcua-address-space-base";
+
 // ----- this file has been automatically generated - do not edit
-import { UAObject } from "node-opcua-address-space-base"
-/**
- * Base component for soft- or hardware elements of
- * a CNC system.
- *
- * |                |                                                            |
- * |----------------|------------------------------------------------------------|
- * |namespace       |http://opcfoundation.org/UA/CNC                             |
- * |nodeClass       |ObjectType                                                  |
- * |typedDefinition |CncComponentType i=1001                                     |
- * |isAbstract      |true                                                        |
- */
-export interface UACncComponent_Base {
-}
-export interface UACncComponent extends UAObject, UACncComponent_Base {
-}
+
+// biome-ignore lint/suspicious/noEmptyInterface: forward-compatible placeholder for OPC-UA generated types
+export interface UACncComponent_Base {}
+export interface UACncComponent extends UAObject, UACncComponent_Base {}

package/source/ua_cnc_drive.ts

@@ -1,12 +1,15 @@
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { EUInformation } from "node-opcua-data-access";
+import type { NodeId } from "node-opcua-nodeid";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+
+import type { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
+
 // ----- this file has been automatically generated - do not edit
-import { UAProperty } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { EUInformation } from "node-opcua-data-access"
-import { NodeId } from "node-opcua-nodeid"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
-import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component"
+
 export interface UACncDrive_actLoad<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits"|"euRange"> { // Variable
       engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
       euRange: UAProperty<DTRange, DataType.ExtensionObject>;
@@ -75,5 +78,4 @@ export interface UACncDrive_Base extends UACncComponent_Base {
      */
     isVirtual: UADataItem<boolean, DataType.Boolean>;
 }
-export interface UACncDrive extends UACncComponent, UACncDrive_Base {
-}
+export interface UACncDrive extends UACncComponent, UACncDrive_Base {}

package/source/ua_cnc_interface.ts

@@ -1,10 +1,13 @@
+import type { UAObject, UAProperty } from "node-opcua-address-space-base";
+import type { UAString } from "node-opcua-basic-types";
+import type { DataType } from "node-opcua-variant";
+
+import type { UACncAxisList } from "./ua_cnc_axis_list";
+import type { UACncChannelList } from "./ua_cnc_channel_list";
+import type { UACncSpindleList } from "./ua_cnc_spindle_list";
+
 // ----- this file has been automatically generated - do not edit
-import { UAObject, UAProperty } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { UAString } from "node-opcua-basic-types"
-import { UACncAxisList } from "./ua_cnc_axis_list"
-import { UACncChannelList } from "./ua_cnc_channel_list"
-import { UACncSpindleList } from "./ua_cnc_spindle_list"
+
 /**
  * Entry point to CNC data interface.
  *
@@ -57,5 +60,4 @@ export interface UACncInterface_Base {
      */
     version: UAProperty<UAString, DataType.String>;
 }
-export interface UACncInterface extends UAObject, UACncInterface_Base {
-}
+export interface UACncInterface extends UAObject, UACncInterface_Base {}

package/source/ua_cnc_message.ts

@@ -1,5 +1,6 @@
+import type { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/dist/ua_base_event";
+
 // ----- this file has been automatically generated - do not edit
-import { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/dist/ua_base_event"
 /**
  * Event transmitting simple information messages.
  *
@@ -11,5 +12,4 @@ import { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/dist/ua_bas
  * |isAbstract      |false                                                       |
  */
 export type UACncMessage_Base = UABaseEvent_Base;
-export interface UACncMessage extends UABaseEvent, UACncMessage_Base {
-}
+export interface UACncMessage extends UABaseEvent, UACncMessage_Base {}

package/source/ua_cnc_position_variable.ts

@@ -1,10 +1,13 @@
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/dist/ua_base_data_variable";
+import type { DataType } from "node-opcua-variant";
+
+import type { DTCncPosition } from "./dt_cnc_position";
+
 // ----- this file has been automatically generated - do not edit
-import { UAProperty } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { EUInformation } from "node-opcua-data-access"
-import { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/dist/ua_base_data_variable"
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
-import { DTCncPosition } from "./dt_cnc_position"
+
 /**
  * Group of position values.
  *
@@ -37,5 +40,4 @@ export interface UACncPositionVariable_Base<T extends DTCncPosition>  extends UA
      */
     remDist: UABaseDataVariable<number, DataType.Double>;
 }
-export interface UACncPositionVariable<T extends DTCncPosition> extends UABaseDataVariable<T, DataType.ExtensionObject>, UACncPositionVariable_Base<T> {
-}
+export interface UACncPositionVariable<T extends DTCncPosition> extends UABaseDataVariable<T, DataType.ExtensionObject>, UACncPositionVariable_Base<T> {}

package/source/ua_cnc_spindle.ts

@@ -1,16 +1,19 @@
+import type { UAProperty } from "node-opcua-address-space-base";
+import type { UInt32 } from "node-opcua-basic-types";
+import type { EUInformation } from "node-opcua-data-access";
+import type { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncSpindleStatus } from "./enum_cnc_spindle_status";
+import type { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction";
+import type { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
+
 // ----- this file has been automatically generated - do not edit
-import { UAProperty } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { EUInformation } from "node-opcua-data-access"
-import { UInt32 } from "node-opcua-basic-types"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
-import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive"
-import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status"
-import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction"
-import { DTCncPosition } from "./dt_cnc_position"
-import { UACncPositionVariable } from "./ua_cnc_position_variable"
+
 export interface UACncSpindle_actSpeed<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits"|"euRange"> { // Variable
       engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;
       euRange: UAProperty<DTRange, DataType.ExtensionObject>;
@@ -79,5 +82,4 @@ export interface UACncSpindle_Base extends UACncDrive_Base {
      */
     cmdSpeed: UACncSpindle_cmdSpeed<number, DataType.Double>;
 }
-export interface UACncSpindle extends UACncDrive, UACncSpindle_Base {
-}
+export interface UACncSpindle extends UACncDrive, UACncSpindle_Base {}

package/source/ua_cnc_spindle_list.ts

@@ -1,17 +1,20 @@
+import type { UAObject } from "node-opcua-address-space-base";
+import type { UAString, UInt32 } from "node-opcua-basic-types";
+import type { NodeId } from "node-opcua-nodeid";
+import type { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import type { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import type { DataType } from "node-opcua-variant";
+
+import type { DTCncPosition } from "./dt_cnc_position";
+import type { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";
+import type { EnumCncOperationMode } from "./enum_cnc_operation_mode";
+import type { EnumCncSpindleStatus } from "./enum_cnc_spindle_status";
+import type { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction";
+import type { UACncPositionVariable } from "./ua_cnc_position_variable";
+import type { UACncSpindle, UACncSpindle_actSpeed, UACncSpindle_cmdSpeed } from "./ua_cnc_spindle";
+
 // ----- this file has been automatically generated - do not edit
-import { UAObject } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { NodeId } from "node-opcua-nodeid"
-import { UInt32, UAString } from "node-opcua-basic-types"
-import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
-import { UACncSpindle, UACncSpindle_actSpeed, UACncSpindle_cmdSpeed } from "./ua_cnc_spindle"
-import { EnumCncOperationMode } from "./enum_cnc_operation_mode"
-import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status"
-import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status"
-import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction"
-import { DTCncPosition } from "./dt_cnc_position"
-import { UACncPositionVariable } from "./ua_cnc_position_variable"
+
 export interface UACncSpindleList_$CncSpindle$ extends Omit<UACncSpindle, "actChannel"|"actGear"|"actLoad"|"actOverride"|"actPower"|"actSpeed"|"actStatus"|"actTorque"|"actTurnDirection"|"anglePos"|"cmdGear"|"cmdOverride"|"cmdSpeed"|"cmdTorque"|"isInactive"|"isVirtual"> { // Object
       /**
        * actChannel
@@ -216,8 +219,8 @@ export interface UACncSpindleList_$CncSpindle$ extends Omit<UACncSpindle, "actCh
  * |typedDefinition |CncSpindleListType i=1009                                   |
  * |isAbstract      |false                                                       |
  */
+// biome-ignore lint/suspicious/noEmptyInterface: forward-compatible placeholder for OPC-UA generated types
 export interface UACncSpindleList_Base {
    // PlaceHolder for $CncSpindle$
 }
-export interface UACncSpindleList extends UAObject, UACncSpindleList_Base {
-}
+export interface UACncSpindleList extends UAObject, UACncSpindleList_Base {}