node-opcua-nodeset-cnc 2.151.0 → 2.154.0

package/dist/dt_cnc_position.d.ts

@@ -1,5 +1,5 @@
 import { ExtensionObject } from "node-opcua-extension-object";
-import { DTStructure } from "node-opcua-nodeset-ua/source/dt_structure";
+import { DTStructure } from "node-opcua-nodeset-ua/dist/dt_structure";
 /**
  * Structure of position elements.
  *

package/dist/ua_cnc_alarm.d.ts

@@ -1,7 +1,7 @@
 import { UAProperty } from "node-opcua-address-space-base";
 import { DataType } from "node-opcua-variant";
 import { UAString } from "node-opcua-basic-types";
-import { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/source/ua_discrete_alarm";
+import { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/dist/ua_discrete_alarm";
 /**
  * Event transmitting Alarms within a CNC system.
  *

package/dist/ua_cnc_axis.d.ts

@@ -1,9 +1,9 @@
 import { UAProperty } from "node-opcua-address-space-base";
 import { DataType } from "node-opcua-variant";
 import { EUInformation } from "node-opcua-data-access";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item";
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
 import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
 import { EnumCncAxisStatus } from "./enum_cnc_axis_status";
 import { DTCncPosition } from "./dt_cnc_position";

package/dist/ua_cnc_channel.d.ts

@@ -2,9 +2,9 @@ import { UAProperty } from "node-opcua-address-space-base";
 import { DataType } from "node-opcua-variant";
 import { EUInformation } from "node-opcua-data-access";
 import { UInt32, UAString } from "node-opcua-basic-types";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item";
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
 import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
 import { EnumCncOperationMode } from "./enum_cnc_operation_mode";
 import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";

package/dist/ua_cnc_drive.d.ts

@@ -2,9 +2,9 @@ import { UAProperty } from "node-opcua-address-space-base";
 import { DataType } from "node-opcua-variant";
 import { EUInformation } from "node-opcua-data-access";
 import { NodeId } from "node-opcua-nodeid";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item";
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
 import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component";
 export interface UACncDrive_actLoad<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits" | "euRange"> {
     engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;

package/dist/ua_cnc_message.d.ts

@@ -1,4 +1,4 @@
-import { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/source/ua_base_event";
+import { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/dist/ua_base_event";
 /**
  * Event transmitting simple information messages.
  *

package/dist/ua_cnc_position_variable.d.ts

@@ -1,8 +1,8 @@
 import { UAProperty } from "node-opcua-address-space-base";
 import { DataType } from "node-opcua-variant";
 import { EUInformation } from "node-opcua-data-access";
-import { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/source/ua_base_data_variable";
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range";
+import { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/dist/ua_base_data_variable";
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
 import { DTCncPosition } from "./dt_cnc_position";
 /**
  * Group of position values.

package/dist/ua_cnc_spindle.d.ts

@@ -2,9 +2,9 @@ import { UAProperty } from "node-opcua-address-space-base";
 import { DataType } from "node-opcua-variant";
 import { EUInformation } from "node-opcua-data-access";
 import { UInt32 } from "node-opcua-basic-types";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item";
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range";
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item";
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range";
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
 import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive";
 import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status";
 import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction";

package/dist/ua_cnc_spindle_list.d.ts

@@ -2,8 +2,8 @@ import { UAObject } from "node-opcua-address-space-base";
 import { DataType } from "node-opcua-variant";
 import { NodeId } from "node-opcua-nodeid";
 import { UInt32, UAString } from "node-opcua-basic-types";
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item";
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item";
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item";
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item";
 import { UACncSpindle, UACncSpindle_actSpeed, UACncSpindle_cmdSpeed } from "./ua_cnc_spindle";
 import { EnumCncOperationMode } from "./enum_cnc_operation_mode";
 import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status";

package/package.json

@@ -1,6 +1,6 @@
 {
     "name": "node-opcua-nodeset-cnc",
-    "version": "2.151.0",
+    "version": "2.154.0",
     "description": "pure nodejs OPCUA SDK - module node-opcua-nodeset-cnc",
     "main": "dist/index.js",
     "types": "dist/index.d.ts",
@@ -11,15 +11,15 @@
     "author": "Etienne Rossignon <etienne.rossignon@sterfive.com>",
     "license": "MIT",
     "dependencies": {
-        "node-opcua-address-space-base": "2.151.0",
-        "node-opcua-basic-types": "2.151.0",
-        "node-opcua-data-access": "2.151.0",
-        "node-opcua-data-model": "2.151.0",
-        "node-opcua-extension-object": "2.151.0",
-        "node-opcua-nodeid": "2.139.0",
-        "node-opcua-nodeset-ua": "2.151.0",
-        "node-opcua-status-code": "2.139.0",
-        "node-opcua-variant": "2.151.0"
+        "node-opcua-address-space-base": "2.154.0",
+        "node-opcua-basic-types": "2.154.0",
+        "node-opcua-data-access": "2.154.0",
+        "node-opcua-data-model": "2.154.0",
+        "node-opcua-extension-object": "2.154.0",
+        "node-opcua-nodeid": "2.153.0",
+        "node-opcua-nodeset-ua": "2.154.0",
+        "node-opcua-status-code": "2.153.0",
+        "node-opcua-variant": "2.154.0"
     },
     "files": [
         "dist",
@@ -38,5 +38,5 @@
         "internet of things"
     ],
     "homepage": "http://node-opcua.github.io/",
-    "gitHead": "991033dd109dcf825217003cbf240ea103890b65"
+    "gitHead": "134c73195f93f46c0101b2837bed22754156c916"
 }

package/source/dt_cnc_position.ts

@@ -1,6 +1,6 @@
 // ----- this file has been automatically generated - do not edit
 import { ExtensionObject } from "node-opcua-extension-object"
-import { DTStructure } from "node-opcua-nodeset-ua/source/dt_structure"
+import { DTStructure } from "node-opcua-nodeset-ua/dist/dt_structure"
 /**
  * Structure of position elements.
  *

package/source/ua_cnc_alarm.ts

@@ -1,13 +1,8 @@
 // ----- this file has been automatically generated - do not edit
 import { UAProperty } from "node-opcua-address-space-base"
-import { DataType, VariantOptions } from "node-opcua-variant"
-import { LocalizedText, QualifiedName } from "node-opcua-data-model"
-import { NodeId } from "node-opcua-nodeid"
-import { StatusCode } from "node-opcua-status-code"
-import { UInt32, UInt16, Int16, UAString } from "node-opcua-basic-types"
-import { DTTimeZone } from "node-opcua-nodeset-ua/source/dt_time_zone"
-import { DTArgument } from "node-opcua-nodeset-ua/source/dt_argument"
-import { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/source/ua_discrete_alarm"
+import { DataType } from "node-opcua-variant"
+import { UAString } from "node-opcua-basic-types"
+import { UADiscreteAlarm, UADiscreteAlarm_Base } from "node-opcua-nodeset-ua/dist/ua_discrete_alarm"
 /**
  * Event transmitting Alarms within a CNC system.
  *

package/source/ua_cnc_axis.ts

@@ -2,9 +2,9 @@
 import { UAProperty } from "node-opcua-address-space-base"
 import { DataType } from "node-opcua-variant"
 import { EUInformation } from "node-opcua-data-access"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item"
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
 import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive"
 import { EnumCncAxisStatus } from "./enum_cnc_axis_status"
 import { DTCncPosition } from "./dt_cnc_position"

package/source/ua_cnc_axis_list.ts

@@ -1,12 +1,6 @@
 // ----- this file has been automatically generated - do not edit
 import { UAObject } from "node-opcua-address-space-base"
-import { DataType, VariantOptions } from "node-opcua-variant"
-import { EUInformation } from "node-opcua-data-access"
-import { NodeId } from "node-opcua-nodeid"
-import { UAString } from "node-opcua-basic-types"
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range"
-import { EnumCncAxisStatus } from "./enum_cnc_axis_status"
-import { DTCncPosition } from "./dt_cnc_position"
+
 /**
  * List of CNC axis objects.
  *

package/source/ua_cnc_channel.ts

@@ -3,9 +3,9 @@ import { UAProperty } from "node-opcua-address-space-base"
 import { DataType } from "node-opcua-variant"
 import { EUInformation } from "node-opcua-data-access"
 import { UInt32, UAString } from "node-opcua-basic-types"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item"
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
 import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component"
 import { EnumCncOperationMode } from "./enum_cnc_operation_mode"
 import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status"

package/source/ua_cnc_channel_list.ts

@@ -1,17 +1,6 @@
 // ----- this file has been automatically generated - do not edit
 import { UAObject } from "node-opcua-address-space-base"
-import { DataType } from "node-opcua-variant"
-import { EUInformation } from "node-opcua-data-access"
-import { NodeId } from "node-opcua-nodeid"
-import { UInt32, UAString } from "node-opcua-basic-types"
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range"
-import { EnumCncAxisStatus } from "./enum_cnc_axis_status"
-import { DTCncPosition } from "./dt_cnc_position"
-import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status"
-import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction"
-import { EnumCncOperationMode } from "./enum_cnc_operation_mode"
-import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status"
-import { EnumCncChannelStatus } from "./enum_cnc_channel_status"
+
 /**
  * List of CNC channel objects.
  *

package/source/ua_cnc_drive.ts

@@ -3,9 +3,9 @@ import { UAProperty } from "node-opcua-address-space-base"
 import { DataType } from "node-opcua-variant"
 import { EUInformation } from "node-opcua-data-access"
 import { NodeId } from "node-opcua-nodeid"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item"
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
 import { UACncComponent, UACncComponent_Base } from "./ua_cnc_component"
 export interface UACncDrive_actLoad<T, DT extends DataType> extends Omit<UAAnalogItem<T, DT>, "engineeringUnits"|"euRange"> { // Variable
       engineeringUnits: UAProperty<EUInformation, DataType.ExtensionObject>;

package/source/ua_cnc_interface.ts

@@ -1,13 +1,7 @@
 // ----- this file has been automatically generated - do not edit
 import { UAObject, UAProperty } from "node-opcua-address-space-base"
 import { DataType } from "node-opcua-variant"
-import { NodeId } from "node-opcua-nodeid"
-import { UInt32, UAString } from "node-opcua-basic-types"
-import { EnumCncOperationMode } from "./enum_cnc_operation_mode"
-import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status"
-import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status"
-import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction"
-import { DTCncPosition } from "./dt_cnc_position"
+import { UAString } from "node-opcua-basic-types"
 import { UACncAxisList } from "./ua_cnc_axis_list"
 import { UACncChannelList } from "./ua_cnc_channel_list"
 import { UACncSpindleList } from "./ua_cnc_spindle_list"

package/source/ua_cnc_message.ts

@@ -1,5 +1,5 @@
 // ----- this file has been automatically generated - do not edit
-import { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/source/ua_base_event"
+import { UABaseEvent, UABaseEvent_Base } from "node-opcua-nodeset-ua/dist/ua_base_event"
 /**
  * Event transmitting simple information messages.
  *

package/source/ua_cnc_position_variable.ts

@@ -2,8 +2,8 @@
 import { UAProperty } from "node-opcua-address-space-base"
 import { DataType } from "node-opcua-variant"
 import { EUInformation } from "node-opcua-data-access"
-import { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/source/ua_base_data_variable"
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range"
+import { UABaseDataVariable, UABaseDataVariable_Base } from "node-opcua-nodeset-ua/dist/ua_base_data_variable"
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
 import { DTCncPosition } from "./dt_cnc_position"
 /**
  * Group of position values.

package/source/ua_cnc_spindle.ts

@@ -3,9 +3,9 @@ import { UAProperty } from "node-opcua-address-space-base"
 import { DataType } from "node-opcua-variant"
 import { EUInformation } from "node-opcua-data-access"
 import { UInt32 } from "node-opcua-basic-types"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item"
-import { DTRange } from "node-opcua-nodeset-ua/source/dt_range"
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item"
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
+import { DTRange } from "node-opcua-nodeset-ua/dist/dt_range"
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
 import { UACncDrive, UACncDrive_Base } from "./ua_cnc_drive"
 import { EnumCncSpindleStatus } from "./enum_cnc_spindle_status"
 import { EnumCncSpindleTurnDirection } from "./enum_cnc_spindle_turn_direction"

package/source/ua_cnc_spindle_list.ts

@@ -3,8 +3,8 @@ import { UAObject } from "node-opcua-address-space-base"
 import { DataType } from "node-opcua-variant"
 import { NodeId } from "node-opcua-nodeid"
 import { UInt32, UAString } from "node-opcua-basic-types"
-import { UADataItem } from "node-opcua-nodeset-ua/source/ua_data_item"
-import { UAAnalogItem } from "node-opcua-nodeset-ua/source/ua_analog_item"
+import { UADataItem } from "node-opcua-nodeset-ua/dist/ua_data_item"
+import { UAAnalogItem } from "node-opcua-nodeset-ua/dist/ua_analog_item"
 import { UACncSpindle, UACncSpindle_actSpeed, UACncSpindle_cmdSpeed } from "./ua_cnc_spindle"
 import { EnumCncOperationMode } from "./enum_cnc_operation_mode"
 import { EnumCncChannelProgramStatus } from "./enum_cnc_channel_program_status"