node-av 6.2.0 → 7.0.0-beta.1

package/dist/constants/options.d.ts

@@ -8,10 +8,13 @@ export interface CodecContextOptions {
     b?: number;
     /** set bitrate (in bits/s) */
     ab?: number;
-    /** Set video bitrate tolerance (in bits/s). In 1-pass mode, bitrate tolerance specifies how far  */
+    /**
+     * Set video bitrate tolerance (in bits/s). In 1-pass mode, bitrate tolerance specifies how far ratecontrol is willing to deviate from the target average bitrate value.
+     * This is not related to minimum/maximum bitrate. Lowering tolerance too much has an adverse effect on quality.
+     */
     bt?: number;
     flags?: 'unaligned' | 'mv4' | 'qpel' | 'loop' | 'qscale' | 'recon_frame' | 'copy_opaque' | 'frame_duration' | 'pass1' | 'pass2' | 'gray' | 'psnr' | 'ildct' | 'low_delay' | 'global_header' | 'bitexact' | 'aic' | 'ilme' | 'cgop' | 'output_corrupt' | (string & {});
-    flags2?: 'fast' | 'noout' | 'ignorecrop' | 'local_header' | 'chunks' | 'showall' | 'export_mvs' | 'skip_manual' | 'ass_ro_flush_noop' | 'icc_profiles' | 'fixed_frame_size' | (string & {});
+    flags2?: 'fast' | 'noout' | 'ignorecrop' | 'local_header' | 'chunks' | 'showall' | 'export_mvs' | 'skip_manual' | 'ass_ro_flush_noop' | 'icc_profiles' | (string & {});
     /** Export metadata as side data */
     export_side_data?: 'mvs' | 'prft' | 'venc_params' | 'film_grain' | 'enhancements' | (string & {});
     time_base?: string | number;
@@ -24,7 +27,7 @@ export interface CodecContextOptions {
     frame_size?: number;
     frame_number?: number;
     delay?: number;
-    /** video quantizer scale compression (VBR). Constant of ratecontrol equation.  */
+    /** video quantizer scale compression (VBR). Constant of ratecontrol equation. Recommended range for default rc_eq: 0.0-1.0 */
     qcomp?: number;
     /** video quantizer scale blur (VBR) */
     qblur?: number;
@@ -198,7 +201,7 @@ export interface CodecContextOptions {
     /** Percentage of damaged samples to discard a frame */
     discard_damaged_percentage?: number;
     /** Comma-separated list of side data types for which user-supplied (container) data is preferred over coded bytestream */
-    side_data_prefer_packet?: 'replaygain' | 'displaymatrix' | 'spherical' | 'stereo3d' | 'audio_service_type' | 'mastering_display_metadata' | 'content_light_level' | 'icc_profile' | 'exif';
+    side_data_prefer_packet?: 'replaygain' | 'displaymatrix' | 'spherical' | 'stereo3d' | 'audio_service_type' | 'mastering_display_metadata' | 'content_light_level' | 'icc_profile' | 'exif' | (string & {});
 }
 export interface EncoderOptionsMap {
     /**
@@ -219,6 +222,172 @@ export interface EncoderOptionsMap {
         /** Forces the use of PCEs */
         aac_pce?: boolean;
     };
+    /**
+     * aac
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#aac_005fat
+     */
+    aac_at: {
+        /** ratecontrol mode */
+        aac_at_mode?: 'auto' | 'cbr' | 'abr' | 'cvbr' | 'vbr';
+        /** quality vs speed control */
+        aac_at_quality?: number;
+    };
+    /**
+     * ATSC A/52A (AC-3)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#ac3
+     */
+    ac3: {
+        /** Center Mix Level */
+        center_mixlev?: number;
+        /** Surround Mix Level */
+        surround_mixlev?: number;
+        /** Mixing Level */
+        mixing_level?: number;
+        /** Room Type */
+        room_type?: 'notindicated' | 'large' | 'small';
+        /** Allow Changing Metadata Per-Frame */
+        per_frame_metadata?: boolean;
+        /** Copyright Bit */
+        copyright?: number;
+        /** Dialogue Level (dB) */
+        dialnorm?: number;
+        /** Dolby Surround Mode */
+        dsur_mode?: 'notindicated' | 'on' | 'off';
+        /** Original Bit Stream */
+        original?: number;
+        /** Preferred Stereo Downmix Mode */
+        dmix_mode?: 'notindicated' | 'ltrt' | 'loro' | 'dplii';
+        /** Lt/Rt Center Mix Level */
+        ltrt_cmixlev?: number;
+        /** Lt/Rt Surround Mix Level */
+        ltrt_surmixlev?: number;
+        /** Lo/Ro Center Mix Level */
+        loro_cmixlev?: number;
+        /** Lo/Ro Surround Mix Level */
+        loro_surmixlev?: number;
+        /** Dolby Surround EX Mode */
+        dsurex_mode?: 'notindicated' | 'on' | 'off' | 'dpliiz';
+        /** Dolby Headphone Mode */
+        dheadphone_mode?: 'notindicated' | 'on' | 'off';
+        /** A/D Converter Type */
+        ad_conv_type?: 'standard' | 'hdcd';
+        /** Stereo Rematrixing */
+        stereo_rematrixing?: boolean;
+        /** Channel Coupling */
+        channel_coupling?: 'auto';
+        /** Coupling Start Band */
+        cpl_start_band?: 'auto';
+    };
+    /**
+     * ATSC A/52A (AC-3)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#ac3_005ffixed
+     */
+    ac3_fixed: {
+        /** Center Mix Level */
+        center_mixlev?: number;
+        /** Surround Mix Level */
+        surround_mixlev?: number;
+        /** Mixing Level */
+        mixing_level?: number;
+        /** Room Type */
+        room_type?: 'notindicated' | 'large' | 'small';
+        /** Allow Changing Metadata Per-Frame */
+        per_frame_metadata?: boolean;
+        /** Copyright Bit */
+        copyright?: number;
+        /** Dialogue Level (dB) */
+        dialnorm?: number;
+        /** Dolby Surround Mode */
+        dsur_mode?: 'notindicated' | 'on' | 'off';
+        /** Original Bit Stream */
+        original?: number;
+        /** Preferred Stereo Downmix Mode */
+        dmix_mode?: 'notindicated' | 'ltrt' | 'loro' | 'dplii';
+        /** Lt/Rt Center Mix Level */
+        ltrt_cmixlev?: number;
+        /** Lt/Rt Surround Mix Level */
+        ltrt_surmixlev?: number;
+        /** Lo/Ro Center Mix Level */
+        loro_cmixlev?: number;
+        /** Lo/Ro Surround Mix Level */
+        loro_surmixlev?: number;
+        /** Dolby Surround EX Mode */
+        dsurex_mode?: 'notindicated' | 'on' | 'off' | 'dpliiz';
+        /** Dolby Headphone Mode */
+        dheadphone_mode?: 'notindicated' | 'on' | 'off';
+        /** A/D Converter Type */
+        ad_conv_type?: 'standard' | 'hdcd';
+        /** Stereo Rematrixing */
+        stereo_rematrixing?: boolean;
+        /** Channel Coupling */
+        channel_coupling?: 'auto';
+        /** Coupling Start Band */
+        cpl_start_band?: 'auto';
+    };
+    /**
+     * ADPCM IMA High Voltage Software ALP
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fima_005falp
+     */
+    adpcm_ima_alp: {
+        /** set the block size */
+        block_size?: number;
+    };
+    /**
+     * ADPCM IMA AMV
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fima_005famv
+     */
+    adpcm_ima_amv: {
+        /** set the block size */
+        block_size?: number;
+    };
+    /**
+     * ADPCM IMA Ubisoft APM
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fima_005fapm
+     */
+    adpcm_ima_apm: {
+        /** set the block size */
+        block_size?: number;
+    };
+    /**
+     * ADPCM IMA Simon & Schuster Interactive
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fima_005fssi
+     */
+    adpcm_ima_ssi: {
+        /** set the block size */
+        block_size?: number;
+    };
+    /**
+     * ADPCM IMA WAV
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fima_005fwav
+     */
+    adpcm_ima_wav: {
+        /** set the block size */
+        block_size?: number;
+    };
+    /**
+     * ADPCM IMA Westwood
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fima_005fws
+     */
+    adpcm_ima_ws: {
+        /** set the block size */
+        block_size?: number;
+    };
+    /**
+     * ADPCM Microsoft
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fms
+     */
+    adpcm_ms: {
+        /** set the block size */
+        block_size?: number;
+    };
+    /**
+     * ADPCM Yamaha
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#adpcm_005fyamaha
+     */
+    adpcm_yamaha: {
+        /** set the block size */
+        block_size?: number;
+    };
     /**
      * ALAC (Apple Lossless Audio Codec)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#alac
@@ -227,6 +396,16 @@ export interface EncoderOptionsMap {
         min_prediction_order?: number;
         max_prediction_order?: number;
     };
+    /**
+     * alac
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#alac_005fat
+     */
+    alac_at: {
+        /** ratecontrol mode */
+        aac_at_mode?: 'auto' | 'cbr' | 'abr' | 'cvbr' | 'vbr';
+        /** quality vs speed control */
+        aac_at_quality?: number;
+    };
     /**
      * AMV Video
      * @see https://ffmpeg.org/ffmpeg-codecs.html#amv
@@ -247,7 +426,11 @@ export interface EncoderOptionsMap {
         rc_qmod_amp?: number;
         /** experimental quantizer modulation */
         rc_qmod_freq?: number;
-        /** Set rate control equation. When computing the expression, besides the standard functions  */
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
         rc_eq?: string;
         /** initial complexity for 1-pass encoding */
         rc_init_cplx?: number;
@@ -393,7 +576,7 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -408,11 +591,57 @@ export interface EncoderOptionsMap {
         /** Constant QP (for P-frames; scaled by qfactor/qoffset for I/B) */
         qp?: number;
         /** Set profile (general_profile_idc) */
-        profile?: number;
+        profile?: 'main' | 'high' | 'professional';
         /** Set tier (general_tier_flag) */
-        tier?: number;
+        tier?: 'main' | 'high';
         /** Set level (general_level_idc) */
-        level?: number;
+        level?: '2.0' | '2.1' | '2.2' | '2.3' | '3.0' | '3.1' | '3.2' | '3.3' | '4.0' | '4.1' | '4.2' | '4.3' | '5.0' | '5.1' | '5.2' | '5.3' | '6.0' | '6.1' | '6.2' | '6.3' | '7.0' | '7.1' | '7.2' | '7.3';
+    };
+    /**
+     * AV1
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#av1_005fmediacodec
+     */
+    av1_mediacodec: {
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** Try NDK MediaCodec in async mode */
+        ndk_async?: boolean;
+        /** Select codec by name */
+        codec_name?: string;
+        /** Bitrate control method */
+        bitrate_mode?: 'cq' | 'vbr' | 'cbr' | 'cbr_fd';
+        /** Use PTS as DTS. It is enabled automatically if avctx max_b_frames <= 0, since most of Android devices don't output B frames by default. */
+        pts_as_dts?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+        /** minimum quantization parameter for I frame */
+        qp_i_min?: number;
+        /** minimum quantization parameter for P frame */
+        qp_p_min?: number;
+        /** minimum quantization parameter for B frame */
+        qp_b_min?: number;
+        /** maximum quantization parameter for I frame */
+        qp_i_max?: number;
+        /** maximum quantization parameter for P frame */
+        qp_p_max?: number;
+        /** maximum quantization parameter for B frame */
+        qp_b_max?: number;
+        /** Specify tier and level */
+        level?: '2' | '2.1' | '2.2' | '2.3' | '3' | '3.1' | '3.2' | '3.3' | '4' | '4.1' | '4.2' | '4.3' | '5' | '5.1' | '5.2' | '5.3' | '6' | '6.1' | '6.2' | '6.3' | '7' | '7.1' | '7.2' | '7.3';
+    };
+    /**
+     * AV1
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#av1_005fmf
+     */
+    av1_mf: {
+        /** Select rate control mode */
+        rate_control?: 'default' | 'cbr' | 'pc_vbr' | 'u_vbr' | 'quality' | 'ld_vbr' | 'g_vbr' | 'gld_vbr';
+        /** Select usage scenario */
+        scenario?: 'default' | 'display_remoting' | 'video_conference' | 'archive' | 'live_streaming' | 'camera_record' | 'display_remoting_with_feature_map';
+        /** Quality */
+        quality?: number;
+        /** Force hardware encoding */
+        hw_encoding?: boolean;
     };
     /**
      * NVIDIA NVENC av1 encoder
@@ -422,7 +651,7 @@ export interface EncoderOptionsMap {
         /** Set the encoding preset */
         preset?: 'default' | 'slow' | 'medium' | 'fast' | 'p1' | 'p2' | 'p3' | 'p4' | 'p5' | 'p6' | 'p7';
         /** Set the encoding tuning info */
-        tune?: 'hq' | 'uhq' | 'll' | 'ull' | 'lossless';
+        tune?: 'hq' | 'll' | 'ull' | 'lossless';
         /** Set the encoding level restriction */
         level?: 'auto' | '2' | '2.0' | '2.1' | '2.2' | '2.3' | '3' | '3.0' | '3.1' | '3.2' | '3.3' | '4' | '4.0' | '4.1' | '4.2' | '4.3' | '5' | '5.0' | '5.1' | '5.2' | '5.3' | '6' | '6.0' | '6.1' | '6.2' | '6.3' | '7' | '7.0' | '7.1' | '7.2' | '7.3';
         /** Set the encoding tier */
@@ -486,7 +715,7 @@ export interface EncoderOptionsMap {
         /** Enable weighted prediction */
         weighted_pred?: boolean;
         /** Use B frames as references */
-        b_ref_mode?: 'disabled' | 'each' | 'middle' | 'hierarchical';
+        b_ref_mode?: 'disabled' | 'each' | 'middle';
         /** Specifies the DPB size used for encoding (0 means automatic) */
         dpb_size?: number;
         /** Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR */
@@ -503,12 +732,6 @@ export interface EncoderOptionsMap {
         s12m_tc?: boolean;
         /** Pad the bitstream to ensure bitrate does not drop below the target in CBR mode */
         cbr_padding?: boolean;
-        /** Specifies the strength of the temporal filtering */
-        tf_level?: '0' | '4';
-        /** Specifies the lookahead level. Higher level may improve quality at the expense of performance. */
-        lookahead_level?: 'auto' | '0' | '1' | '2' | '3';
-        /** Specifies the split encoding mode */
-        split_encode_mode?: 'disabled' | 'auto' | 'forced' | '2' | '3' | '4';
     };
     /**
      * AV1 (Intel Quick Sync Video acceleration)
@@ -557,9 +780,9 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
-        /** Use low-power encoding mode (only available on some platforms;  */
+        /** Use low-power encoding mode (only available on some platforms; may not support all encoding features) */
         low_power?: boolean;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -587,20 +810,20 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
         /** Use an explicit constant quantizer for the whole stream */
         qp?: number;
         /** Set encode quality (trades off against speed, higher is slower) */
         quality?: number;
         /** Select rate control type */
-        rc_mode?: number;
+        rc_mode?: 'auto' | 'driver' | 'cqp' | 'cbr' | 'vbr';
         /** Select tuning type */
-        tune?: number;
+        tune?: 'default' | 'hq' | 'll' | 'ull' | 'lossless';
         /** Select usage type */
-        usage?: string;
+        usage?: 'default' | 'transcode' | 'stream' | 'record' | 'conference' | (string & {});
         /** Select content type */
-        content?: string;
+        content?: 'default' | 'camera' | 'desktop' | 'rendered' | (string & {});
         /** Set profile */
         profile?: 'main' | 'high' | 'professional';
         /** Set tier (seq_tier) */
@@ -608,7 +831,7 @@ export interface EncoderOptionsMap {
         /** Set level (level_idc) */
         level?: '20' | '21' | '22' | '23' | '30' | '31' | '32' | '33' | '40' | '41' | '42' | '43' | '50' | '51' | '52' | '53' | '60' | '61' | '62' | '63' | '70' | '71' | '72' | '73';
         /** Set units to include */
-        units?: string;
+        units?: 'hdr' | (string & {});
     };
     /**
      * GoPro CineForm HD
@@ -694,6 +917,48 @@ export interface EncoderOptionsMap {
     dxv: {
         format?: 'dxt1';
     };
+    /**
+     * ATSC A/52 E-AC-3
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#eac3
+     */
+    eac3: {
+        /** Mixing Level */
+        mixing_level?: number;
+        /** Room Type */
+        room_type?: 'notindicated' | 'large' | 'small';
+        /** Allow Changing Metadata Per-Frame */
+        per_frame_metadata?: boolean;
+        /** Copyright Bit */
+        copyright?: number;
+        /** Dialogue Level (dB) */
+        dialnorm?: number;
+        /** Dolby Surround Mode */
+        dsur_mode?: 'notindicated' | 'on' | 'off';
+        /** Original Bit Stream */
+        original?: number;
+        /** Preferred Stereo Downmix Mode */
+        dmix_mode?: 'notindicated' | 'ltrt' | 'loro' | 'dplii';
+        /** Lt/Rt Center Mix Level */
+        ltrt_cmixlev?: number;
+        /** Lt/Rt Surround Mix Level */
+        ltrt_surmixlev?: number;
+        /** Lo/Ro Center Mix Level */
+        loro_cmixlev?: number;
+        /** Lo/Ro Surround Mix Level */
+        loro_surmixlev?: number;
+        /** Dolby Surround EX Mode */
+        dsurex_mode?: 'notindicated' | 'on' | 'off' | 'dpliiz';
+        /** Dolby Headphone Mode */
+        dheadphone_mode?: 'notindicated' | 'on' | 'off';
+        /** A/D Converter Type */
+        ad_conv_type?: 'standard' | 'hdcd';
+        /** Stereo Rematrixing */
+        stereo_rematrixing?: boolean;
+        /** Channel Coupling */
+        channel_coupling?: 'auto';
+        /** Coupling Start Band */
+        cpl_start_band?: 'auto';
+    };
     /**
      * OpenEXR image
      * @see https://ffmpeg.org/ffmpeg-codecs.html#exr
@@ -747,8 +1012,6 @@ export interface EncoderOptionsMap {
         rct_search?: boolean;
         /** Internal parallelization depth */
         async_depth?: number;
-        /** Remap Mode */
-        remap_mode?: 'auto' | 'off' | 'dualrle' | 'flipdualrle';
     };
     /**
      * Huffyuv FFmpeg variant
@@ -786,6 +1049,65 @@ export interface EncoderOptionsMap {
         min_prediction_order?: number;
         max_prediction_order?: number;
     };
+    /**
+     * FLV / Sorenson Spark / Sorenson H.263 (Flash Video)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#flv
+     */
+    flv: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
     /**
      * G.726 ADPCM
      * @see https://ffmpeg.org/ffmpeg-codecs.html#g726
@@ -814,6 +1136,65 @@ export interface EncoderOptionsMap {
         /** write a palette to the global gif header where feasible */
         global_palette?: boolean;
     };
+    /**
+     * H.261
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h261
+     */
+    h261: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
     /**
      * H.263 / H.263-1996
      * @see https://ffmpeg.org/ffmpeg-codecs.html#h263
@@ -838,7 +1219,11 @@ export interface EncoderOptionsMap {
         rc_qmod_amp?: number;
         /** experimental quantizer modulation */
         rc_qmod_freq?: number;
-        /** Set rate control equation. When computing the expression, besides the standard functions  */
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
         rc_eq?: string;
         /** initial complexity for 1-pass encoding */
         rc_init_cplx?: number;
@@ -873,6 +1258,16 @@ export interface EncoderOptionsMap {
         /** Scene change threshold */
         sc_threshold?: number;
     };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h263_005fv4l2m2m
+     */
+    h263_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * H.263+ / H.263-1998 / H.263 version 2
      * @see https://ffmpeg.org/ffmpeg-codecs.html#h263p
@@ -901,7 +1296,11 @@ export interface EncoderOptionsMap {
         rc_qmod_amp?: number;
         /** experimental quantizer modulation */
         rc_qmod_freq?: number;
-        /** Set rate control equation. When computing the expression, besides the standard functions  */
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
         rc_eq?: string;
         /** initial complexity for 1-pass encoding */
         rc_init_cplx?: number;
@@ -950,9 +1349,9 @@ export interface EncoderOptionsMap {
         /** enables low latency mode */
         latency?: boolean;
         /** Set the encoding quality preset */
-        quality?: 'balanced' | 'speed' | 'quality' | 'high_quality';
+        quality?: 'balanced' | 'speed' | 'quality';
         /** Set the encoding quality preset */
-        preset?: 'balanced' | 'speed' | 'quality' | 'high_quality';
+        preset?: 'balanced' | 'speed' | 'quality';
         /** Rate Control Method */
         rc?: 'cqp' | 'cbr' | 'vbr_peak' | 'vbr_latency' | 'qvbr' | 'hqvbr' | 'hqcbr';
         /** Sets the QVBR quality level */
@@ -1047,7 +1446,7 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -1062,15 +1461,59 @@ export interface EncoderOptionsMap {
         /** Constant QP (for P-frames; scaled by qfactor/qoffset for I/B) */
         qp?: number;
         /** Set profile (general_profile_idc) */
-        profile?: number;
+        profile?: 'main' | 'high' | 'high10';
         /** Set level (general_level_idc) */
-        level?: number;
+        level?: '1' | '1.1' | '1.2' | '1.3' | '2' | '2.1' | '2.2' | '3' | '3.1' | '3.2' | '4' | '4.1' | '4.2' | '5' | '5.1' | '5.2' | '6' | '6.1' | '6.2';
         /** Deblocking filter mode */
         deblock?: boolean;
         /** Entropy coder type */
-        coder?: number;
-        /** Constrained intra prediction (constrained_intra_pred_flag) */
-        constrained_intra_pred?: boolean;
+        coder?: 'cavlc' | 'cabac';
+    };
+    /**
+     * H.264
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fmediacodec
+     */
+    h264_mediacodec: {
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** Try NDK MediaCodec in async mode */
+        ndk_async?: boolean;
+        /** Select codec by name */
+        codec_name?: string;
+        /** Bitrate control method */
+        bitrate_mode?: 'cq' | 'vbr' | 'cbr' | 'cbr_fd';
+        /** Use PTS as DTS. It is enabled automatically if avctx max_b_frames <= 0, since most of Android devices don't output B frames by default. */
+        pts_as_dts?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+        /** minimum quantization parameter for I frame */
+        qp_i_min?: number;
+        /** minimum quantization parameter for P frame */
+        qp_p_min?: number;
+        /** minimum quantization parameter for B frame */
+        qp_b_min?: number;
+        /** maximum quantization parameter for I frame */
+        qp_i_max?: number;
+        /** maximum quantization parameter for P frame */
+        qp_p_max?: number;
+        /** maximum quantization parameter for B frame */
+        qp_b_max?: number;
+        /** Specify level */
+        level?: '1' | '1b' | '1.1' | '1.2' | '1.3' | '2' | '2.1' | '2.2' | '3' | '3.1' | '3.2' | '4' | '4.1' | '4.2' | '5' | '5.1' | '5.2' | '6.0' | '6.1' | '6.2';
+    };
+    /**
+     * H264
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fmf
+     */
+    h264_mf: {
+        /** Select rate control mode */
+        rate_control?: 'default' | 'cbr' | 'pc_vbr' | 'u_vbr' | 'quality' | 'ld_vbr' | 'g_vbr' | 'gld_vbr';
+        /** Select usage scenario */
+        scenario?: 'default' | 'display_remoting' | 'video_conference' | 'archive' | 'live_streaming' | 'camera_record' | 'display_remoting_with_feature_map';
+        /** Quality */
+        quality?: number;
+        /** Force hardware encoding */
+        hw_encoding?: boolean;
     };
     /**
      * NVIDIA NVENC H.264 encoder
@@ -1082,7 +1525,7 @@ export interface EncoderOptionsMap {
         /** Set the encoding tuning info */
         tune?: 'hq' | 'll' | 'ull' | 'lossless';
         /** Set the encoding profile */
-        profile?: 'baseline' | 'main' | 'high' | 'high10' | 'high422' | 'high444p';
+        profile?: 'baseline' | 'main' | 'high' | 'high444p';
         /** Set the encoding level restriction */
         level?: 'auto' | '1' | '1.0' | '1b' | '1.0b' | '1.1' | '1.2' | '1.3' | '2' | '2.0' | '2.1' | '2.2' | '3' | '3.0' | '3.1' | '3.2' | '4' | '4.0' | '4.1' | '4.2' | '5' | '5.0' | '5.1' | '5.2' | '6.0' | '6.1' | '6.2';
         /** Override the preset rate-control */
@@ -1153,14 +1596,10 @@ export interface EncoderOptionsMap {
         b_ref_mode?: 'disabled' | 'each' | 'middle';
         /** Use A53 Closed Captions (if available) */
         a53cc?: boolean;
-        /** Use timecode (if available) */
-        s12m_tc?: boolean;
         /** Specifies the DPB size used for encoding (0 means automatic) */
         dpb_size?: number;
         /** Set the multipass encoding */
         multipass?: 'disabled' | 'qres' | 'fullres';
-        /** Enable 10 bit encode for 8 bit input */
-        highbitdepth?: boolean;
         /** Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR */
         ldkfs?: number;
         /** Pass on extra SEI data (e.g. a53 cc) to be included in the bitstream */
@@ -1177,10 +1616,18 @@ export interface EncoderOptionsMap {
         'constrained-encoding'?: boolean;
         /** Pad the bitstream to ensure bitrate does not drop below the target in CBR mode */
         cbr_padding?: boolean;
-        /** Specifies the strength of the temporal filtering */
-        tf_level?: '0' | '4';
-        /** Specifies the lookahead level. Higher level may improve quality at the expense of performance. */
-        lookahead_level?: 'auto' | '0' | '1' | '2' | '3';
+    };
+    /**
+     * H.264
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fohcodec
+     */
+    h264_ohcodec: {
+        /** Select codec by name */
+        codec_name?: string;
+        /** Allow software encoding */
+        allow_sw?: boolean;
+        /** Bitrate control method */
+        bitrate_mode?: 'cbr' | 'vbr' | 'cq';
     };
     /**
      * OpenMAX IL H.264 video encoder
@@ -1298,6 +1745,52 @@ export interface EncoderOptionsMap {
         /** repeat pps for every frame */
         repeat_pps?: boolean;
     };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005frkmpp
+     */
+    h264_rkmpp: {
+        /** Set the encoding rate control mode */
+        rc_mode?: 'VBR' | 'CBR' | 'CQP' | 'AVBR';
+        /** Set the initial QP value */
+        qp_init?: number;
+        /** Set the max QP value for P and B frame */
+        qp_max?: number;
+        /** Set the min QP value for P and B frame */
+        qp_min?: number;
+        /** Set the max QP value for I frame */
+        qp_max_i?: number;
+        /** Set the min QP value for I frame */
+        qp_min_i?: number;
+        /** Use Intra Refresh instead of IDR frames */
+        intra_refresh?: boolean;
+        /** Set the Intra Refresh mode */
+        refresh_mode?: 'row' | 'col';
+        /** Set how many MB rows or columns refresh each time */
+        refresh_num?: number;
+        /** Set the encoding profile restriction */
+        profile?: 'baseline' | 'main' | 'high';
+        /** Set the encoding level restriction */
+        level?: '1' | '1.1' | '1.2' | '1.3' | '2' | '2.1' | '2.2' | '3' | '3.1' | '3.2' | '4' | '4.1' | '4.2' | '5' | '5.1' | '5.2' | '6' | '6.1' | '6.2';
+        /** Set the entropy coder type (from 0 to 1) (default cabac) */
+        coder?: 'cavlc' | 'cabac';
+        /** Set the high profile 8x8 transform */
+        '8x8dct'?: boolean;
+        /** Pass on user data unregistered SEI if available */
+        udu_sei?: boolean;
+        /** Add prefix NAL between SEI info and encoded bitstream data */
+        prefix_mode?: boolean;
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fv4l2m2m
+     */
+    h264_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * H.264/AVC (VAAPI)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fvaapi
@@ -1307,9 +1800,9 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
-        /** Use low-power encoding mode (only available on some platforms;  */
+        /** Use low-power encoding mode (only available on some platforms; may not support all encoding features) */
         low_power?: boolean;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -1377,28 +1870,28 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
         /** Use an explicit constant quantizer for the whole stream */
         qp?: number;
         /** Set encode quality (trades off against speed, higher is slower) */
         quality?: number;
         /** Select rate control type */
-        rc_mode?: number;
+        rc_mode?: 'auto' | 'driver' | 'cqp' | 'cbr' | 'vbr';
         /** Select tuning type */
-        tune?: number;
+        tune?: 'default' | 'hq' | 'll' | 'ull' | 'lossless';
         /** Select usage type */
-        usage?: string;
+        usage?: 'default' | 'transcode' | 'stream' | 'record' | 'conference' | (string & {});
         /** Select content type */
-        content?: string;
+        content?: 'default' | 'camera' | 'desktop' | 'rendered' | (string & {});
         /** Set profile (profile_idc and constraint_set*_flag) */
         profile?: 'constrained_baseline' | 'main' | 'high' | 'high444p';
         /** Set level (level_idc) */
         level?: '1' | '1.1' | '1.2' | '1.3' | '2' | '2.1' | '2.2' | '3' | '3.1' | '3.2' | '4' | '4.1' | '4.2' | '5' | '5.1' | '5.2' | '6' | '6.1' | '6.2';
         /** Entropy coder type */
-        coder?: number;
+        coder?: 'cabac' | 'vlc';
         /** Set units to include */
-        units?: string;
+        units?: 'aud' | 'identifier' | 'timing' | 'recovery' | 'a53_cc' | (string & {});
     };
     /**
      * Vidvox Hap
@@ -1427,9 +1920,9 @@ export interface EncoderOptionsMap {
         /** Set the encoding level (default auto) */
         level?: 'auto' | '1.0' | '2.0' | '2.1' | '3.0' | '3.1' | '4.0' | '4.1' | '5.0' | '5.1' | '5.2' | '6.0' | '6.1' | '6.2';
         /** Set the encoding quality preset */
-        quality?: 'quality' | 'balanced' | 'speed' | 'high_quality';
+        quality?: 'quality' | 'balanced' | 'speed';
         /** Set the encoding quality preset */
-        preset?: 'quality' | 'balanced' | 'speed' | 'high_quality';
+        preset?: 'quality' | 'balanced' | 'speed';
         /** enables low latency mode */
         latency?: boolean;
         /** Set the rate control mode */
@@ -1518,7 +2011,7 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -1533,13 +2026,57 @@ export interface EncoderOptionsMap {
         /** Constant QP (for P-frames; scaled by qfactor/qoffset for I/B) */
         qp?: number;
         /** Set profile (general_profile_idc) */
-        profile?: number;
+        profile?: 'main' | 'main10';
         /** Set tier (general_tier_flag) */
-        tier?: number;
+        tier?: 'main' | 'high';
         /** Set level (general_level_idc) */
-        level?: number;
-        /** Constrained intra prediction (constrained_intra_pred_flag) */
-        constrained_intra_pred?: boolean;
+        level?: '1' | '2' | '2.1' | '3' | '3.1' | '4' | '4.1' | '5' | '5.1' | '5.2' | '6' | '6.1' | '6.2';
+    };
+    /**
+     * H.265
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fmediacodec
+     */
+    hevc_mediacodec: {
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** Try NDK MediaCodec in async mode */
+        ndk_async?: boolean;
+        /** Select codec by name */
+        codec_name?: string;
+        /** Bitrate control method */
+        bitrate_mode?: 'cq' | 'vbr' | 'cbr' | 'cbr_fd';
+        /** Use PTS as DTS. It is enabled automatically if avctx max_b_frames <= 0, since most of Android devices don't output B frames by default. */
+        pts_as_dts?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+        /** minimum quantization parameter for I frame */
+        qp_i_min?: number;
+        /** minimum quantization parameter for P frame */
+        qp_p_min?: number;
+        /** minimum quantization parameter for B frame */
+        qp_b_min?: number;
+        /** maximum quantization parameter for I frame */
+        qp_i_max?: number;
+        /** maximum quantization parameter for P frame */
+        qp_p_max?: number;
+        /** maximum quantization parameter for B frame */
+        qp_b_max?: number;
+        /** Specify tier and level */
+        level?: 'm1' | 'h1' | 'm2' | 'h2' | 'm2.1' | 'h2.1' | 'm3' | 'h3' | 'm3.1' | 'h3.1' | 'm4' | 'h4' | 'm4.1' | 'h4.1' | 'm5' | 'h5' | 'm5.1' | 'h5.1' | 'm5.2' | 'h5.2' | 'm6' | 'h6' | 'm6.1' | 'h6.1' | 'm6.2' | 'h6.2';
+    };
+    /**
+     * HEVC
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fmf
+     */
+    hevc_mf: {
+        /** Select rate control mode */
+        rate_control?: 'default' | 'cbr' | 'pc_vbr' | 'u_vbr' | 'quality' | 'ld_vbr' | 'g_vbr' | 'gld_vbr';
+        /** Select usage scenario */
+        scenario?: 'default' | 'display_remoting' | 'video_conference' | 'archive' | 'live_streaming' | 'camera_record' | 'display_remoting_with_feature_map';
+        /** Quality */
+        quality?: number;
+        /** Force hardware encoding */
+        hw_encoding?: boolean;
     };
     /**
      * NVIDIA NVENC hevc encoder
@@ -1549,9 +2086,9 @@ export interface EncoderOptionsMap {
         /** Set the encoding preset */
         preset?: 'default' | 'slow' | 'medium' | 'fast' | 'hp' | 'hq' | 'bd' | 'll' | 'llhq' | 'llhp' | 'lossless' | 'losslesshp' | 'p1' | 'p2' | 'p3' | 'p4' | 'p5' | 'p6' | 'p7';
         /** Set the encoding tuning info */
-        tune?: 'hq' | 'uhq' | 'll' | 'ull' | 'lossless';
+        tune?: 'hq' | 'll' | 'ull' | 'lossless';
         /** Set the encoding profile */
-        profile?: 'main' | 'main10' | 'rext' | 'mv';
+        profile?: 'main' | 'main10' | 'rext';
         /** Set the encoding level restriction */
         level?: 'auto' | '1' | '1.0' | '2' | '2.0' | '2.1' | '3' | '3.0' | '3.1' | '4' | '4.0' | '4.1' | '5' | '5.0' | '5.1' | '5.2' | '6' | '6.0' | '6.1' | '6.2';
         /** Set the encoding tier */
@@ -1628,8 +2165,6 @@ export interface EncoderOptionsMap {
         dpb_size?: number;
         /** Set the multipass encoding */
         multipass?: 'disabled' | 'qres' | 'fullres';
-        /** Enable 10 bit encode for 8 bit input */
-        highbitdepth?: boolean;
         /** Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR */
         ldkfs?: number;
         /** Pass on extra SEI data (e.g. a53 cc) to be included in the bitstream */
@@ -1646,14 +2181,18 @@ export interface EncoderOptionsMap {
         'constrained-encoding'?: boolean;
         /** Pad the bitstream to ensure bitrate does not drop below the target in CBR mode */
         cbr_padding?: boolean;
-        /** Specifies the strength of the temporal filtering */
-        tf_level?: '0' | '4';
-        /** Specifies the lookahead level. Higher level may improve quality at the expense of performance. */
-        lookahead_level?: 'auto' | '0' | '1' | '2' | '3';
-        /** Enable use of unidirectional B-Frames. */
-        unidir_b?: boolean;
-        /** Specifies the split encoding mode */
-        split_encode_mode?: 'disabled' | 'auto' | 'forced' | '2' | '3' | '4';
+    };
+    /**
+     * H.265
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fohcodec
+     */
+    hevc_ohcodec: {
+        /** Select codec by name */
+        codec_name?: string;
+        /** Allow software encoding */
+        allow_sw?: boolean;
+        /** Bitrate control method */
+        bitrate_mode?: 'cbr' | 'vbr' | 'cq';
     };
     /**
      * HEVC (Intel Quick Sync Video acceleration)
@@ -1753,6 +2292,48 @@ export interface EncoderOptionsMap {
         /** This profile allow to encode 10 bit single still picture */
         main10sp?: boolean;
     };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005frkmpp
+     */
+    hevc_rkmpp: {
+        /** Set the encoding rate control mode */
+        rc_mode?: 'VBR' | 'CBR' | 'CQP' | 'AVBR';
+        /** Set the initial QP value */
+        qp_init?: number;
+        /** Set the max QP value for P and B frame */
+        qp_max?: number;
+        /** Set the min QP value for P and B frame */
+        qp_min?: number;
+        /** Set the max QP value for I frame */
+        qp_max_i?: number;
+        /** Set the min QP value for I frame */
+        qp_min_i?: number;
+        /** Use Intra Refresh instead of IDR frames */
+        intra_refresh?: boolean;
+        /** Set the Intra Refresh mode */
+        refresh_mode?: 'row' | 'col';
+        /** Set how many MB rows or columns refresh each time */
+        refresh_num?: number;
+        /** Set the encoding profile restriction */
+        profile?: 'main';
+        /** Set the encoding profile tier restriction */
+        tier?: 'main' | 'high';
+        /** Set the encoding level restriction */
+        level?: '1' | '2' | '2.1' | '3' | '3.1' | '4' | '4.1' | '5' | '5.1' | '5.2' | '6' | '6.1' | '6.2';
+        /** Pass on user data unregistered SEI if available */
+        udu_sei?: boolean;
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fv4l2m2m
+     */
+    hevc_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * H.265/HEVC (VAAPI)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fvaapi
@@ -1762,9 +2343,9 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
-        /** Use low-power encoding mode (only available on some platforms;  */
+        /** Use low-power encoding mode (only available on some platforms; may not support all encoding features) */
         low_power?: boolean;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -1826,20 +2407,20 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
         /** Use an explicit constant quantizer for the whole stream */
         qp?: number;
         /** Set encode quality (trades off against speed, higher is slower) */
         quality?: number;
         /** Select rate control type */
-        rc_mode?: number;
+        rc_mode?: 'auto' | 'driver' | 'cqp' | 'cbr' | 'vbr';
         /** Select tuning type */
-        tune?: number;
+        tune?: 'default' | 'hq' | 'll' | 'ull' | 'lossless';
         /** Select usage type */
-        usage?: string;
+        usage?: 'default' | 'transcode' | 'stream' | 'record' | 'conference' | (string & {});
         /** Select content type */
-        content?: string;
+        content?: 'default' | 'camera' | 'desktop' | 'rendered' | (string & {});
         /** Set profile (profile_idc and constraint_set*_flag) */
         profile?: 'main' | 'main10' | 'rext';
         /** Set tier (general_tier_flag) */
@@ -1847,7 +2428,7 @@ export interface EncoderOptionsMap {
         /** Set level (general_level_idc) */
         level?: '1' | '2' | '2.1' | '3' | '3.1' | '4' | '4.1' | '5' | '5.1' | '5.2' | '6' | '6.1' | '6.2';
         /** Set units to include */
-        units?: string;
+        units?: 'hdr' | 'a53_cc' | (string & {});
     };
     /**
      * Huffyuv / HuffYUV
@@ -1859,6 +2440,16 @@ export interface EncoderOptionsMap {
         /** Prediction method */
         pred?: 'left' | 'plane' | 'median';
     };
+    /**
+     * ilbc
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#ilbc_005fat
+     */
+    ilbc_at: {
+        /** ratecontrol mode */
+        aac_at_mode?: 'auto' | 'cbr' | 'abr' | 'cvbr' | 'vbr';
+        /** quality vs speed control */
+        aac_at_quality?: number;
+    };
     /**
      * JPEG 2000
      * @see https://ffmpeg.org/ffmpeg-codecs.html#jpeg2000
@@ -1896,9 +2487,9 @@ export interface EncoderOptionsMap {
     'libaom-av1': {
         /** Quality/Speed ratio modifier */
         'cpu-used'?: number;
-        /** Enable use of alternate reference  */
+        /** Enable use of alternate reference frames (2-pass only) */
         'auto-alt-ref'?: number;
-        /** Number of frames to look ahead at for  */
+        /** Number of frames to look ahead at for alternate reference frame selection */
         'lag-in-frames'?: number;
         /** altref noise reduction max frame count */
         'arnr-max-frames'?: number;
@@ -2066,7 +2657,7 @@ export interface EncoderOptionsMap {
     libjxl: {
         /** Encoding effort */
         effort?: number;
-        /** Maximum Butteraugli distance (quality setting,  */
+        /** Maximum Butteraugli distance (quality setting, lower = better, zero = lossless, default 1.0) */
         distance?: number;
         /** Force modular mode */
         modular?: number;
@@ -2080,7 +2671,7 @@ export interface EncoderOptionsMap {
     libjxl_anim: {
         /** Encoding effort */
         effort?: number;
-        /** Maximum Butteraugli distance (quality setting,  */
+        /** Maximum Butteraugli distance (quality setting, lower = better, zero = lossless, default 1.0) */
         distance?: number;
         /** Force modular mode */
         modular?: number;
@@ -2193,8 +2784,6 @@ export interface EncoderOptionsMap {
         vbr?: 'off' | 'on' | 'constrained';
         /** Channel Mapping Family */
         mapping_family?: number;
-        /** Enable DTX (Discontinuous transmission) */
-        dtx?: boolean;
         /** Apply intensity stereo phase inversion */
         apply_phase_inv?: boolean;
     };
@@ -2315,7 +2904,7 @@ export interface EncoderOptionsMap {
      * @see https://ffmpeg.org/ffmpeg-codecs.html#libvpx
      */
     libvpx: {
-        /** Number of frames to look ahead for  */
+        /** Number of frames to look ahead for alternate reference frame selection */
         'lag-in-frames'?: number;
         /** altref noise reduction max frame count */
         'arnr-maxframes'?: number;
@@ -2345,7 +2934,7 @@ export interface EncoderOptionsMap {
         'overshoot-pct'?: number;
         /** Temporal scaling configuration using a :-separated list of key=value parameters */
         'ts-parameters'?: string;
-        /** Enable use of alternate reference  */
+        /** Enable use of alternate reference frames (2-pass only) */
         'auto-alt-ref'?: number;
         /** Quality/Speed ratio modifier */
         'cpu-used'?: number;
@@ -2370,7 +2959,7 @@ export interface EncoderOptionsMap {
      * @see https://ffmpeg.org/ffmpeg-codecs.html#libvpx_002dvp9
      */
     'libvpx-vp9': {
-        /** Number of frames to look ahead for  */
+        /** Number of frames to look ahead for alternate reference frame selection */
         'lag-in-frames'?: number;
         /** altref noise reduction max frame count */
         'arnr-maxframes'?: number;
@@ -2400,7 +2989,7 @@ export interface EncoderOptionsMap {
         'overshoot-pct'?: number;
         /** Temporal scaling configuration using a :-separated list of key=value parameters */
         'ts-parameters'?: string;
-        /** Enable use of alternate reference  */
+        /** Enable use of alternate reference frames (2-pass only) */
         'auto-alt-ref'?: number;
         /** Quality/Speed ratio modifier */
         'cpu-used'?: number;
@@ -2446,7 +3035,7 @@ export interface EncoderOptionsMap {
      */
     libvvenc: {
         /** set encoding preset */
-        preset?: number;
+        preset?: 'faster' | 'fast' | 'medium' | 'slow' | 'slower';
         /** set quantization */
         qp?: number;
         /** set subjective (perceptually motivated) optimization */
@@ -2462,7 +3051,39 @@ export interface EncoderOptionsMap {
         /** Specify level (as defined by Annex A) */
         level?: string;
         /** set vvc tier */
-        tier?: number;
+        tier?: 'main' | 'high';
+    };
+    /**
+     * libwebp WebP image
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#libwebp
+     */
+    libwebp: {
+        /** Use lossless mode */
+        lossless?: number;
+        /** Configuration preset */
+        preset?: 'none' | 'default' | 'picture' | 'photo' | 'drawing' | 'icon' | 'text';
+        /** Conditional replenishment threshold */
+        cr_threshold?: number;
+        /** Conditional replenishment block size */
+        cr_size?: number;
+        /** Quality */
+        quality?: number;
+    };
+    /**
+     * libwebp WebP image
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#libwebp_005fanim
+     */
+    libwebp_anim: {
+        /** Use lossless mode */
+        lossless?: number;
+        /** Configuration preset */
+        preset?: 'none' | 'default' | 'picture' | 'photo' | 'drawing' | 'icon' | 'text';
+        /** Conditional replenishment threshold */
+        cr_threshold?: number;
+        /** Conditional replenishment block size */
+        cr_size?: number;
+        /** Quality */
+        quality?: number;
     };
     /**
      * libx262 MPEG2VIDEO
@@ -2530,7 +3151,7 @@ export interface EncoderOptionsMap {
         deblock?: string;
         /** Reduce fluctuations in QP (before curve compression) */
         cplxblur?: number;
-        /** A comma-separated list of partitions to consider.  */
+        /** A comma-separated list of partitions to consider. Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all */
         partitions?: string;
         /** Direct MV prediction mode */
         'direct-pred'?: 'none' | 'spatial' | 'temporal' | 'auto';
@@ -2538,7 +3159,7 @@ export interface EncoderOptionsMap {
         'slice-max-size'?: number;
         /** Filename for 2 pass stats */
         stats?: string;
-        /** Signal HRD information (requires vbv-bufsize;  */
+        /** Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4) */
         'nal-hrd'?: 'none' | 'vbr' | 'cbr';
         /** AVC-Intra class 50/100/200/300/480 */
         'avcintra-class'?: number;
@@ -2631,7 +3252,7 @@ export interface EncoderOptionsMap {
         deblock?: string;
         /** Reduce fluctuations in QP (before curve compression) */
         cplxblur?: number;
-        /** A comma-separated list of partitions to consider.  */
+        /** A comma-separated list of partitions to consider. Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all */
         partitions?: string;
         /** Direct MV prediction mode */
         'direct-pred'?: 'none' | 'spatial' | 'temporal' | 'auto';
@@ -2639,7 +3260,7 @@ export interface EncoderOptionsMap {
         'slice-max-size'?: number;
         /** Filename for 2 pass stats */
         stats?: string;
-        /** Signal HRD information (requires vbv-bufsize;  */
+        /** Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4) */
         'nal-hrd'?: 'none' | 'vbr' | 'cbr';
         /** AVC-Intra class 50/100/200/300/480 */
         'avcintra-class'?: number;
@@ -2732,7 +3353,7 @@ export interface EncoderOptionsMap {
         deblock?: string;
         /** Reduce fluctuations in QP (before curve compression) */
         cplxblur?: number;
-        /** A comma-separated list of partitions to consider.  */
+        /** A comma-separated list of partitions to consider. Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all */
         partitions?: string;
         /** Direct MV prediction mode */
         'direct-pred'?: 'none' | 'spatial' | 'temporal' | 'auto';
@@ -2740,7 +3361,7 @@ export interface EncoderOptionsMap {
         'slice-max-size'?: number;
         /** Filename for 2 pass stats */
         stats?: string;
-        /** Signal HRD information (requires vbv-bufsize;  */
+        /** Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4) */
         'nal-hrd'?: 'none' | 'vbr' | 'cbr';
         /** AVC-Intra class 50/100/200/300/480 */
         'avcintra-class'?: number;
@@ -2934,7 +3555,11 @@ export interface EncoderOptionsMap {
         rc_qmod_amp?: number;
         /** experimental quantizer modulation */
         rc_qmod_freq?: number;
-        /** Set rate control equation. When computing the expression, besides the standard functions  */
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
         rc_eq?: string;
         /** initial complexity for 1-pass encoding */
         rc_init_cplx?: number;
@@ -2967,6 +3592,20 @@ export interface EncoderOptionsMap {
         /** Maximum processing parallelism */
         async_depth?: number;
     };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mjpeg_005frkmpp
+     */
+    mjpeg_rkmpp: {
+        /** Set the initial QP/Q_Factor value */
+        qp_init?: number;
+        /** Set the max QP/Q_Factor value */
+        qp_max?: number;
+        /** Set the min QP/Q_Factor value */
+        qp_min?: number;
+        /** Specify the output chroma format for down subsampling */
+        chroma_fmt?: 'auto' | '400' | '420' | '422' | '444';
+    };
     /**
      * MJPEG (VAAPI)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#mjpeg_005fvaapi
@@ -2976,9 +3615,9 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
-        /** Use low-power encoding mode (only available on some platforms;  */
+        /** Use low-power encoding mode (only available on some platforms; may not support all encoding features) */
         low_power?: boolean;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -3023,6 +3662,79 @@ export interface EncoderOptionsMap {
         /** Frame height, usually video height */
         height?: number;
     };
+    /**
+     * MPEG-1 video
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg1video
+     */
+    mpeg1video: {
+        /** MPEG GOP Timecode in hh:mm:ss[:;.]ff format. Overrides timecode_frame_start. */
+        gop_timecode?: string;
+        /** Timecode is in drop frame format. */
+        drop_frame_timecode?: boolean;
+        /** Reserve space for SVCD scan offset user data. */
+        scan_offset?: boolean;
+        /** GOP timecode frame start number, in non-drop-frame format */
+        timecode_frame_start?: number;
+        /** Strategy to choose between I/P/B-frames */
+        b_strategy?: number;
+        /** Adjust sensitivity of b_frame_strategy 1 */
+        b_sensitivity?: number;
+        /** Downscale frames for dynamic B-frame decision */
+        brd_scale?: number;
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
     /**
      * MPEG-2 video (Intel Quick Sync Video acceleration)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2_005fqsv
@@ -3050,9 +3762,9 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
-        /** Use low-power encoding mode (only available on some platforms;  */
+        /** Use low-power encoding mode (only available on some platforms; may not support all encoding features) */
         low_power?: boolean;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -3065,6 +3777,93 @@ export interface EncoderOptionsMap {
         /** Set level (in profile_and_level_indication) */
         level?: 'low' | 'main' | 'high_1440' | 'high';
     };
+    /**
+     * MPEG-2 video
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2video
+     */
+    mpeg2video: {
+        /** MPEG GOP Timecode in hh:mm:ss[:;.]ff format. Overrides timecode_frame_start. */
+        gop_timecode?: string;
+        /** Timecode is in drop frame format. */
+        drop_frame_timecode?: boolean;
+        /** Reserve space for SVCD scan offset user data. */
+        scan_offset?: boolean;
+        /** GOP timecode frame start number, in non-drop-frame format */
+        timecode_frame_start?: number;
+        /** Strategy to choose between I/P/B-frames */
+        b_strategy?: number;
+        /** Adjust sensitivity of b_frame_strategy 1 */
+        b_sensitivity?: number;
+        /** Downscale frames for dynamic B-frame decision */
+        brd_scale?: number;
+        /** Precision of the DC coefficient - 8 */
+        intra_dc_precision?: number;
+        /** Use MPEG-2 intra VLC table. */
+        intra_vlc?: boolean;
+        /** Use nonlinear quantizer. */
+        non_linear_quant?: boolean;
+        /** Enable alternate scantable. */
+        alternate_scan?: boolean;
+        /** Use A53 Closed Captions (if available) */
+        a53cc?: boolean;
+        /** Write sequence_display_extension blocks. */
+        seq_disp_ext?: 'auto' | 'never' | 'always';
+        /** Video_format in the sequence_display_extension indicating the source of the video. */
+        video_format?: 'component' | 'pal' | 'ntsc' | 'secam' | 'mac' | 'unspecified';
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
     /**
      * MPEG-4 part 2
      * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4
@@ -3097,7 +3896,11 @@ export interface EncoderOptionsMap {
         rc_qmod_amp?: number;
         /** experimental quantizer modulation */
         rc_qmod_freq?: number;
-        /** Set rate control equation. When computing the expression, besides the standard functions  */
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
         rc_eq?: string;
         /** initial complexity for 1-pass encoding */
         rc_init_cplx?: number;
@@ -3132,6 +3935,38 @@ export interface EncoderOptionsMap {
         /** Scene change threshold */
         sc_threshold?: number;
     };
+    /**
+     * MPEG-4
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005fmediacodec
+     */
+    mpeg4_mediacodec: {
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** Try NDK MediaCodec in async mode */
+        ndk_async?: boolean;
+        /** Select codec by name */
+        codec_name?: string;
+        /** Bitrate control method */
+        bitrate_mode?: 'cq' | 'vbr' | 'cbr' | 'cbr_fd';
+        /** Use PTS as DTS. It is enabled automatically if avctx max_b_frames <= 0, since most of Android devices don't output B frames by default. */
+        pts_as_dts?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+        /** minimum quantization parameter for I frame */
+        qp_i_min?: number;
+        /** minimum quantization parameter for P frame */
+        qp_p_min?: number;
+        /** minimum quantization parameter for B frame */
+        qp_b_min?: number;
+        /** maximum quantization parameter for I frame */
+        qp_i_max?: number;
+        /** maximum quantization parameter for P frame */
+        qp_p_max?: number;
+        /** maximum quantization parameter for B frame */
+        qp_b_max?: number;
+        /** Specify tier and level */
+        level?: '0' | '0b' | '1' | '2' | '3' | '3b' | '4' | '4a' | '5' | '6';
+    };
     /**
      * OpenMAX IL MPEG-4 video encoder
      * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005fomx
@@ -3146,6 +3981,134 @@ export interface EncoderOptionsMap {
         /** Set the encoding profile */
         profile?: 'baseline' | 'main' | 'high';
     };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005fv4l2m2m
+     */
+    mpeg4_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
+    /**
+     * MPEG-4 part 2 Microsoft variant version 3
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#msmpeg4
+     */
+    msmpeg4: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
+    /**
+     * MPEG-4 part 2 Microsoft variant version 2
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#msmpeg4v2
+     */
+    msmpeg4v2: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
     /**
      * Opus
      * @see https://ffmpeg.org/ffmpeg-codecs.html#opus
@@ -3156,6 +4119,26 @@ export interface EncoderOptionsMap {
         /** Apply intensity stereo phase inversion */
         apply_phase_inv?: boolean;
     };
+    /**
+     * pcm_alaw
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#pcm_005falaw_005fat
+     */
+    pcm_alaw_at: {
+        /** ratecontrol mode */
+        aac_at_mode?: 'auto' | 'cbr' | 'abr' | 'cvbr' | 'vbr';
+        /** quality vs speed control */
+        aac_at_quality?: number;
+    };
+    /**
+     * pcm_mulaw
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#pcm_005fmulaw_005fat
+     */
+    pcm_mulaw_at: {
+        /** ratecontrol mode */
+        aac_at_mode?: 'auto' | 'cbr' | 'abr' | 'cvbr' | 'vbr';
+        /** quality vs speed control */
+        aac_at_quality?: number;
+    };
     /**
      * PNG (Portable Network Graphics) image
      * @see https://ffmpeg.org/ffmpeg-codecs.html#png
@@ -3265,13 +4248,131 @@ export interface EncoderOptionsMap {
         sixteen_color_thresh?: number;
     };
     /**
-     * SBC (low-complexity subband codec)
-     * @see https://ffmpeg.org/ffmpeg-codecs.html#sbc
+     * RealVideo 1.0
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#rv10
      */
-    sbc: {
-        /** set maximum algorithmic latency */
-        sbc_delay?: string;
-        /** use mSBC mode (wideband speech mono SBC) */
+    rv10: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
+    /**
+     * RealVideo 2.0
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#rv20
+     */
+    rv20: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
+    /**
+     * SBC (low-complexity subband codec)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#sbc
+     */
+    sbc: {
+        /** set maximum algorithmic latency */
+        sbc_delay?: string;
+        /** use mSBC mode (wideband speech mono SBC) */
         msbc?: boolean;
     };
     /**
@@ -3301,8 +4402,71 @@ export interface EncoderOptionsMap {
         sc_threshold?: number;
         /** Spatial decomposition type */
         pred?: 'dwt97' | 'dwt53';
-        /** Set rate control equation. When computing the expression, besides the standard functions  */
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+    };
+    /**
+     * NewTek SpeedHQ
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#speedhq
+     */
+    speedhq: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
         rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
     };
     /**
      * Sun Rasterfile image
@@ -3391,6 +4555,48 @@ export interface EncoderOptionsMap {
         /** Custom quantization matrix */
         qm?: 'default' | 'color' | 'flat';
     };
+    /**
+     * VP8
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005fmediacodec
+     */
+    vp8_mediacodec: {
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** Try NDK MediaCodec in async mode */
+        ndk_async?: boolean;
+        /** Select codec by name */
+        codec_name?: string;
+        /** Bitrate control method */
+        bitrate_mode?: 'cq' | 'vbr' | 'cbr' | 'cbr_fd';
+        /** Use PTS as DTS. It is enabled automatically if avctx max_b_frames <= 0, since most of Android devices don't output B frames by default. */
+        pts_as_dts?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+        /** minimum quantization parameter for I frame */
+        qp_i_min?: number;
+        /** minimum quantization parameter for P frame */
+        qp_p_min?: number;
+        /** minimum quantization parameter for B frame */
+        qp_b_min?: number;
+        /** maximum quantization parameter for I frame */
+        qp_i_max?: number;
+        /** maximum quantization parameter for P frame */
+        qp_p_max?: number;
+        /** maximum quantization parameter for B frame */
+        qp_b_max?: number;
+        /** Specify tier and level */
+        level?: 'V0' | 'V1' | 'V2' | 'V3';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005fv4l2m2m
+     */
+    vp8_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * VP8 (VAAPI)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005fvaapi
@@ -3400,9 +4606,9 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
-        /** Use low-power encoding mode (only available on some platforms;  */
+        /** Use low-power encoding mode (only available on some platforms; may not support all encoding features) */
         low_power?: boolean;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -3415,6 +4621,38 @@ export interface EncoderOptionsMap {
         /** Loop filter sharpness */
         loop_filter_sharpness?: number;
     };
+    /**
+     * VP9
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005fmediacodec
+     */
+    vp9_mediacodec: {
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** Try NDK MediaCodec in async mode */
+        ndk_async?: boolean;
+        /** Select codec by name */
+        codec_name?: string;
+        /** Bitrate control method */
+        bitrate_mode?: 'cq' | 'vbr' | 'cbr' | 'cbr_fd';
+        /** Use PTS as DTS. It is enabled automatically if avctx max_b_frames <= 0, since most of Android devices don't output B frames by default. */
+        pts_as_dts?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+        /** minimum quantization parameter for I frame */
+        qp_i_min?: number;
+        /** minimum quantization parameter for P frame */
+        qp_p_min?: number;
+        /** minimum quantization parameter for B frame */
+        qp_b_min?: number;
+        /** maximum quantization parameter for I frame */
+        qp_i_max?: number;
+        /** maximum quantization parameter for P frame */
+        qp_p_max?: number;
+        /** maximum quantization parameter for B frame */
+        qp_b_max?: number;
+        /** Specify tier and level */
+        level?: '1' | '1.1' | '2' | '2.1' | '3' | '3.1' | '4' | '4.1' | '5' | '5.1' | '5.2' | '6' | '6.1' | '6.2';
+    };
     /**
      * VP9 video (Intel Quick Sync Video acceleration)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005fqsv
@@ -3444,9 +4682,9 @@ export interface EncoderOptionsMap {
         idr_interval?: number;
         /** Maximum B-frame reference depth */
         b_depth?: number;
-        /** Maximum processing parallelism.  */
+        /** Maximum processing parallelism. Increase this to improve single channel performance. */
         async_depth?: number;
-        /** Use low-power encoding mode (only available on some platforms;  */
+        /** Use low-power encoding mode (only available on some platforms; may not support all encoding features) */
         low_power?: boolean;
         /** Maximum frame size (in bytes) */
         max_frame_size?: number;
@@ -3467,6 +4705,124 @@ export interface EncoderOptionsMap {
         joint_stereo?: boolean;
         optimize_mono?: boolean;
     };
+    /**
+     * Windows Media Video 7
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#wmv1
+     */
+    wmv1: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
+    /**
+     * Windows Media Video 8
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#wmv2
+     */
+    wmv2: {
+        /** Flags common for all mpegvideo-based encoders. */
+        mpv_flags?: 'skip_rd' | 'strict_gop' | 'qp_rd' | 'cbp_rd' | 'naq' | 'mv0' | (string & {});
+        /** single coefficient elimination threshold for luminance (negative values also consider dc coefficient) */
+        luma_elim_threshold?: number;
+        /** single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) */
+        chroma_elim_threshold?: number;
+        quantizer_noise_shaping?: number;
+        /** Simulate errors in the bitstream to test error concealment. */
+        error_rate?: number;
+        /** how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) */
+        qsquish?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_amp?: number;
+        /** experimental quantizer modulation */
+        rc_qmod_freq?: number;
+        /**
+         * Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions
+         * are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex
+         * avgPITex avgPPTex avgBPTex avgTex.
+         */
+        rc_eq?: string;
+        /** initial complexity for 1-pass encoding */
+        rc_init_cplx?: number;
+        /** currently useless */
+        rc_buf_aggressivity?: number;
+        /** increase the quantizer for macroblocks close to borders */
+        border_mask?: number;
+        /** minimum Lagrange factor (VBR) */
+        lmin?: number;
+        /** maximum Lagrange factor (VBR) */
+        lmax?: number;
+        /** Frame skip threshold */
+        skip_threshold?: number;
+        /** Frame skip factor */
+        skip_factor?: number;
+        /** Frame skip exponent */
+        skip_exp?: number;
+        /** Frame skip compare function */
+        skip_cmp?: 'sad' | 'sse' | 'satd' | 'dct' | 'psnr' | 'bit' | 'rd' | 'zero' | 'vsad' | 'vsse' | 'nsse' | 'dct264' | 'dctmax' | 'chroma' | 'msad';
+        /** Noise reduction */
+        noise_reduction?: number;
+        /** RTP payload size in bytes */
+        ps?: number;
+        /** motion estimation algorithm */
+        motion_est?: 'zero' | 'epzs' | 'xone';
+        /** Motion estimation bitrate penalty compensation (1.0 = 256) */
+        mepc?: number;
+        /** pre motion estimation */
+        mepre?: number;
+        /** Penalty for intra blocks in block decision */
+        intra_penalty?: number;
+        /** Scene change threshold */
+        sc_threshold?: number;
+    };
 }
 export interface DecoderOptionsMap {
     /**
@@ -3478,8 +4834,6 @@ export interface DecoderOptionsMap {
         dual_mono_mode?: 'auto' | 'main' | 'sub' | 'both';
         /** Order in which the channels are to be exported */
         channel_order?: 'default' | 'coded';
-        /** Target output loudness in dBFS for xHE-AAC normalization (0 = disabled) */
-        target_level?: number;
     };
     /**
      * AAC (Advanced Audio Coding)
@@ -3490,8 +4844,18 @@ export interface DecoderOptionsMap {
         dual_mono_mode?: 'auto' | 'main' | 'sub' | 'both';
         /** Order in which the channels are to be exported */
         channel_order?: 'default' | 'coded';
-        /** Target output loudness in dBFS for xHE-AAC normalization (0 = disabled) */
-        target_level?: number;
+    };
+    /**
+     * AAC
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#aac_005fmediacodec
+     */
+    aac_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
     };
     /**
      * ATSC A/52A (AC-3)
@@ -3534,7 +4898,7 @@ export interface DecoderOptionsMap {
         downmix?: string;
     };
     /**
-     * Dolby AC-4
+     * AC-4
      * @see https://ffmpeg.org/ffmpeg-codecs.html#ac4
      */
     ac4: {
@@ -3557,6 +4921,30 @@ export interface DecoderOptionsMap {
         /** Sets the maximum order (ALS simple profile allows max 15) */
         max_order?: number;
     };
+    /**
+     * AMR-NB
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#amrnb_005fmediacodec
+     */
+    amrnb_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * AMR-WB
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#amrwb_005fmediacodec
+     */
+    amrwb_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
     /**
      * Monkey's Audio
      * @see https://ffmpeg.org/ffmpeg-codecs.html#ape
@@ -3573,6 +4961,82 @@ export interface DecoderOptionsMap {
         /** Select an operating point of the scalable bitstream */
         operating_point?: number;
     };
+    /**
+     * AMD AMF AV1 encoder
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#av1_005famf
+     */
+    av1_amf: {
+        /** Decoder mode */
+        decoder_mode?: 'regular' | 'compliant' | 'low_latency';
+        /** Timestamp mode */
+        timestamp_mode?: 'presentation' | 'sort' | 'decode';
+        /** Number of surfaces in the decode pool */
+        surface_pool_size?: number;
+        /** Minimum number of surfaces for reordering */
+        dpb_size?: number;
+        /** Low latency */
+        lowlatency?: number;
+        /** Smart Access Video */
+        smart_access_video?: number;
+        /** Skip transfer on another GPU when SAV enabled */
+        skip_transfer_sav?: number;
+        /** Copy Output */
+        copy_output?: number;
+    };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#av1_005fcuvid
+     */
+    av1_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * AV1
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#av1_005fmediacodec
+     */
+    av1_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * AV1 (Intel Quick Sync Video acceleration)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#av1_005fqsv
+     */
+    av1_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#av1_005frkmpp
+     */
+    av1_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
     /**
      * Closed Captions (EIA-608 / CEA-708)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#cc_005fdec
@@ -3629,7 +5093,7 @@ export interface DecoderOptionsMap {
         forced_subs_only?: boolean;
     };
     /**
-     * ATSC A/52B (AC-3, E-AC-3)
+     * ATSC A/52 E-AC-3
      * @see https://ffmpeg.org/ffmpeg-codecs.html#eac3
      */
     eac3: {
@@ -3732,6 +5196,30 @@ export interface DecoderOptionsMap {
         /** color value (ARGB) that is used instead of transparent color */
         trans_color?: number;
     };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h263_005frkmpp
+     */
+    h263_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h263_005fv4l2m2m
+     */
+    h263_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
      * @see https://ffmpeg.org/ffmpeg-codecs.html#h264
@@ -3750,6 +5238,112 @@ export interface DecoderOptionsMap {
         /** Avoid using gray gap frames as references */
         noref_gray?: boolean;
     };
+    /**
+     * AMD AMF H.264 Encoder
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005famf
+     */
+    h264_amf: {
+        /** Decoder mode */
+        decoder_mode?: 'regular' | 'compliant' | 'low_latency';
+        /** Timestamp mode */
+        timestamp_mode?: 'presentation' | 'sort' | 'decode';
+        /** Number of surfaces in the decode pool */
+        surface_pool_size?: number;
+        /** Minimum number of surfaces for reordering */
+        dpb_size?: number;
+        /** Low latency */
+        lowlatency?: number;
+        /** Smart Access Video */
+        smart_access_video?: number;
+        /** Skip transfer on another GPU when SAV enabled */
+        skip_transfer_sav?: number;
+        /** Copy Output */
+        copy_output?: number;
+    };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fcuvid
+     */
+    h264_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * H.264
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fmediacodec
+     */
+    h264_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * h264
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fmmal
+     */
+    h264_mmal: {
+        /** extra buffers */
+        extra_buffers?: number;
+        /** extra MMAL internal buffered frames */
+        extra_decoder_buffers?: number;
+    };
+    /**
+     * H.264
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fohcodec
+     */
+    h264_ohcodec: {
+        /** Select codec by name */
+        codec_name?: string;
+        /** Allow software decoding */
+        allow_sw?: boolean;
+    };
+    /**
+     * H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (Intel Quick Sync Video acceleration)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fqsv
+     */
+    h264_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005frkmpp
+     */
+    h264_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#h264_005fv4l2m2m
+     */
+    h264_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * HEVC (High Efficiency Video Coding)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc
@@ -3764,7 +5358,107 @@ export interface DecoderOptionsMap {
         /** Array of available view IDs is exported here */
         view_ids_available?: string;
         /** Array of view positions for view_ids_available is exported here, as AVStereo3DView */
-        view_pos_available?: 'unspecified' | 'left' | 'right';
+        view_pos_available?: 'unspecified' | 'left' | 'right' | (string & {});
+    };
+    /**
+     * AMD AMF HEVC encoder
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005famf
+     */
+    hevc_amf: {
+        /** Decoder mode */
+        decoder_mode?: 'regular' | 'compliant' | 'low_latency';
+        /** Timestamp mode */
+        timestamp_mode?: 'presentation' | 'sort' | 'decode';
+        /** Number of surfaces in the decode pool */
+        surface_pool_size?: number;
+        /** Minimum number of surfaces for reordering */
+        dpb_size?: number;
+        /** Low latency */
+        lowlatency?: number;
+        /** Smart Access Video */
+        smart_access_video?: number;
+        /** Skip transfer on another GPU when SAV enabled */
+        skip_transfer_sav?: number;
+        /** Copy Output */
+        copy_output?: number;
+    };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fcuvid
+     */
+    hevc_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * H.265
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fmediacodec
+     */
+    hevc_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * H.265
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fohcodec
+     */
+    hevc_ohcodec: {
+        /** Select codec by name */
+        codec_name?: string;
+        /** Allow software decoding */
+        allow_sw?: boolean;
+    };
+    /**
+     * HEVC (Intel Quick Sync Video acceleration)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fqsv
+     */
+    hevc_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A user plugin to load in an internal session */
+        load_plugin?: 'none' | 'hevc_sw' | 'hevc_hw';
+        /** A :-separate list of hexadecimal plugin UIDs to load in an internal session */
+        load_plugins?: string;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005frkmpp
+     */
+    hevc_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#hevc_005fv4l2m2m
+     */
+    hevc_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
     };
     /**
      * JPEG 2000
@@ -3918,6 +5612,48 @@ export interface DecoderOptionsMap {
         /** Use external huffman table. */
         extern_huff?: boolean;
     };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mjpeg_005fcuvid
+     */
+    mjpeg_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * MJPEG (Intel Quick Sync Video acceleration)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mjpeg_005fqsv
+     */
+    mjpeg_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mjpeg_005frkmpp
+     */
+    mjpeg_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
     /**
      * MLP (Meridian Lossless Packing)
      * @see https://ffmpeg.org/ffmpeg-codecs.html#mlp
@@ -3936,6 +5672,134 @@ export interface DecoderOptionsMap {
         /** Frame height, usually video height */
         height?: number;
     };
+    /**
+     * MP3
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mp3_005fmediacodec
+     */
+    mp3_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg1_005fcuvid
+     */
+    mpeg1_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg1_005frkmpp
+     */
+    mpeg1_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg1_005fv4l2m2m
+     */
+    mpeg1_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2_005fcuvid
+     */
+    mpeg2_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * MPEG-2
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2_005fmediacodec
+     */
+    mpeg2_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * mpeg2
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2_005fmmal
+     */
+    mpeg2_mmal: {
+        /** extra buffers */
+        extra_buffers?: number;
+        /** extra MMAL internal buffered frames */
+        extra_decoder_buffers?: number;
+    };
+    /**
+     * MPEG-2 video (Intel Quick Sync Video acceleration)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2_005fqsv
+     */
+    mpeg2_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2_005frkmpp
+     */
+    mpeg2_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2_005fv4l2m2m
+     */
+    mpeg2_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * MPEG-2 video
      * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg2video
@@ -3954,6 +5818,70 @@ export interface DecoderOptionsMap {
         /** divx style packed b frames */
         divx_packed?: boolean;
     };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005fcuvid
+     */
+    mpeg4_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * MPEG-4
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005fmediacodec
+     */
+    mpeg4_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * mpeg4
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005fmmal
+     */
+    mpeg4_mmal: {
+        /** extra buffers */
+        extra_buffers?: number;
+        /** extra MMAL internal buffered frames */
+        extra_decoder_buffers?: number;
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005frkmpp
+     */
+    mpeg4_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#mpeg4_005fv4l2m2m
+     */
+    mpeg4_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * Opus
      * @see https://ffmpeg.org/ffmpeg-codecs.html#opus
@@ -4070,6 +5998,204 @@ export interface DecoderOptionsMap {
         /** Custom V210 stride */
         custom_stride?: number;
     };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vc1_005fcuvid
+     */
+    vc1_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * vc1
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vc1_005fmmal
+     */
+    vc1_mmal: {
+        /** extra buffers */
+        extra_buffers?: number;
+        /** extra MMAL internal buffered frames */
+        extra_decoder_buffers?: number;
+    };
+    /**
+     * VC1
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vc1_005fqsv
+     */
+    vc1_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vc1_005fv4l2m2m
+     */
+    vc1_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005fcuvid
+     */
+    vp8_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * VP8
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005fmediacodec
+     */
+    vp8_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * VP8
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005fqsv
+     */
+    vp8_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005frkmpp
+     */
+    vp8_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp8_005fv4l2m2m
+     */
+    vp8_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
+    /**
+     * VP9
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005famf
+     */
+    vp9_amf: {
+        /** Decoder mode */
+        decoder_mode?: 'regular' | 'compliant' | 'low_latency';
+        /** Timestamp mode */
+        timestamp_mode?: 'presentation' | 'sort' | 'decode';
+        /** Number of surfaces in the decode pool */
+        surface_pool_size?: number;
+        /** Minimum number of surfaces for reordering */
+        dpb_size?: number;
+        /** Low latency */
+        lowlatency?: number;
+        /** Smart Access Video */
+        smart_access_video?: number;
+        /** Skip transfer on another GPU when SAV enabled */
+        skip_transfer_sav?: number;
+        /** Copy Output */
+        copy_output?: number;
+    };
+    /**
+     * Nvidia CUVID
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005fcuvid
+     */
+    vp9_cuvid: {
+        /** Set deinterlacing mode */
+        deint?: 'weave' | 'bob' | 'adaptive';
+        /** GPU to be used for decoding */
+        gpu?: string;
+        /** Maximum surfaces to be used for decoding */
+        surfaces?: number;
+        /** Drop second field when deinterlacing */
+        drop_second_field?: boolean;
+        /** Crop (top)x(bottom)x(left)x(right) */
+        crop?: string;
+        /** Resize (width)x(height) */
+        resize?: string;
+    };
+    /**
+     * VP9
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005fmediacodec
+     */
+    vp9_mediacodec: {
+        /** Delay flush until hw output buffers are returned to the decoder */
+        delay_flush?: boolean;
+        /** Use MediaCodec from NDK */
+        ndk_codec?: boolean;
+        /** The desired operating rate that the codec will need to operate at, zero for unspecified */
+        operating_rate?: number;
+    };
+    /**
+     * VP9 video (Intel Quick Sync Video acceleration)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005fqsv
+     */
+    vp9_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
+    /**
+     * Rockchip MPP (Media Process Platform)
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005frkmpp
+     */
+    vp9_rkmpp: {
+        /** Enable IEP (Image Enhancement Processor) for de-interlacing */
+        deint?: boolean;
+        /** Enable AFBC (Arm Frame Buffer Compression) to save bandwidth */
+        afbc?: 'off' | 'on' | 'rga';
+        /** Enable fast parsing to improve decoding parallelism */
+        fast_parse?: boolean;
+        /** Set the buffer mode for MPP decoder */
+        buf_mode?: 'half' | 'ext';
+    };
+    /**
+     * V4L2 mem2mem
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vp9_005fv4l2m2m
+     */
+    vp9_v4l2m2m: {
+        /** Number of buffers in the output context */
+        num_output_buffers?: number;
+        /** Number of buffers in the capture context */
+        num_capture_buffers?: number;
+    };
     /**
      * VPlayer subtitle
      * @see https://ffmpeg.org/ffmpeg-codecs.html#vplayer
@@ -4078,4 +6204,14 @@ export interface DecoderOptionsMap {
         /** Set if ASS tags must be escaped */
         keep_ass_markup?: boolean;
     };
+    /**
+     * VVC
+     * @see https://ffmpeg.org/ffmpeg-codecs.html#vvc_005fqsv
+     */
+    vvc_qsv: {
+        /** Internal parallelization depth, the higher the value the higher the latency. */
+        async_depth?: number;
+        /** A GPU-accelerated copy between video and system memory */
+        gpu_copy?: 'default' | 'on' | 'off';
+    };
 }