nanoeffects 0.32.0 → 0.33.0

package/llms-full.txt

@@ -1321,7 +1321,7 @@ Each row is optional. The "when" column says what need brings you to it.
 | `nanoeffects/svelte` | `sveltePlugin`: adds `eventStore` to a bus (needs Svelte 5 or newer) | Svelte components |
 | `nanoeffects/vue` | `vuePlugin`: adds `watchEmitter` and `useEventRef` to a bus (needs Vue 3.3 or newer) | Vue components |
 | `nanoeffects/dev` | `devPlugin` (no-op in production), `getLostSignalsCount` and `getLostSignals` for tests | you look for leaks and lost signals in development and in tests |
-| `nanoeffects/trace` | `createTracer`, the loggers (`graphLogger` finds event loops) and `tracePlugin` (names for the trace) | you want to see what ran and why |
+| `nanoeffects/trace` | `createTracer`, the loggers (`graphLogger` finds event loops; `mergeGraphs` and `findOrphans` find listeners no run reached) and `tracePlugin` (names for the trace) | you want to see what ran and why |
 | `nanoeffects/testing` | `createMarbleBus`, `fakeTimersClock`: a bus for tests, with emits and phases as diagrams | you test `latest`, `debounce`, `queue`, `retry` or `timeout` with fake timers |
 | `nanoeffects/guard` | `loopGuardPlugin`: refuses the emit that would pass a limit of a chain | a loop must not take the app down |
 
@@ -7852,10 +7852,13 @@ Tracing is optional. A bus works the same without it, and it costs almost nothin
 - [Use built-in loggers](#use-built-in-loggers)
   - [Cut volume in production](#cut-volume-in-production)
   - [Keep the last events for an incident](#keep-the-last-events-for-an-incident)
+  - [Measure time and find open tasks](#measure-time-and-find-open-tasks)
+  - [Find the cause of an error](#find-the-cause-of-an-error)
   - [Configure Redux DevTools](#configure-redux-devtools)
   - [Find loops with `graphLogger`](#find-loops-with-graphlogger)
   - [Send safe data to a tool](#send-safe-data-to-a-tool)
   - [Write your own logger](#write-your-own-logger)
+  - [Stop on an event](#stop-on-an-event)
 - [Drop tracing from a build](#drop-tracing-from-a-build)
 
 ## Attach a tracer
@@ -8086,7 +8089,7 @@ console.log(describeBus(bus));
 
 **When.** You debug in development and want to jump from a log line to the code.
 
-Pass `source: true` to `tracePlugin`. It reads the place of each `bus.on` and `bus.once` call once, when the listener is registered, and never on `emit`. The events of the listener get a `source` (`file:line:column`), `consoleLogger({ source: true })` prints it, and `describeBus(bus, { source: true })` lists it. An anonymous listener is reported too, under the type of its event.
+Pass `source: true` to `tracePlugin`. It reads the place of each `bus.on` and `bus.once` call once, when the listener is registered, and never on `emit`. The events of the listener get a `source` (`file:line:column`), `consoleLogger({ source: true })` prints it, and `describeBus(bus, { source: true })` lists it. An anonymous listener is reported too, under the type of its event and a number: `name/changed#1`, `name/changed#2`, in the order of registration. Two inline listeners on one event are two entries, and the place stays in `source`. Adding or reordering `bus.on` calls renumbers them, so give a `traceId` to a listener whose name must stay the same between builds.
 
 ```js
 import { createBus } from "nanoeffects";
@@ -8114,7 +8117,7 @@ console.log(describeBus(bus, { source: true }));
 
 ```
 [nanoeffects] saveName · run start (file:///app/src/user.js:13:5)
-[nanoeffects] name/changed · run start (file:///app/src/user.js:14:5)
+[nanoeffects] name/changed#1 · run start (file:///app/src/user.js:14:5)
 { "name/changed": ["saveName (file:///app/src/user.js:13:5)", "<anonymous> (file:///app/src/user.js:14:5)"] }
 ```
 
@@ -8167,7 +8170,7 @@ const bus = createBus({
 | `consoleLogger()` | Prints one line per phase, indented by task depth |
 | `performanceLogger()` | User Timing measures for the browser Performance panel |
 | `createTraceRecorder()` | Keeps events in `recorder.events`: all of them for tests, or with `{ capacity }` the last N ([see below](#keep-the-last-events-for-an-incident)) |
-| `graphLogger()` | Builds the map of which event leads to which, finds loops while the app runs, and writes the map as Mermaid, Graphviz or JSON ([see below](#find-loops-with-graphlogger)) |
+| `graphLogger()` | Builds the map of which event leads to which, finds loops while the app runs, and writes the map as Mermaid, Graphviz or JSON ([see below](#find-loops-with-graphlogger)); [`mergeGraphs` and `findOrphans`](debugging-loops.md#find-listeners-that-never-ran) join runs and find listeners that never ran |
 
 ### Cut volume in production
 
@@ -8227,12 +8230,91 @@ window.addEventListener("error", () => {
 What to know before you send the events:
 
 - **`payload` and `error` can hold private data**: what a user typed, tokens, personal text. The recorder keeps them as they are and does not redact. Choose what to send, as `withoutPayload` does.
-- **There is no time on an event.** You get the order, not the duration. To add a time, wrap the recorder in a logger that stamps `performance.now()` on a copy of the event.
+- **There is no time on an event.** You get the order, not the duration. [`timingLogger`](#measure-time-and-find-open-tasks) measures time.
 - **An old `parentId` can point at an event that was pushed out.** When you build a tree from the events, treat an unknown `parentId` as a root.
 - **`recorder.events` is a snapshot with a `capacity`.** Each read builds a new array, so read it once at the moment you need it. Without a `capacity` it is one live array.
 - **A low `sample` thins the buffer.** `createTracer(recorder, { sample: 0.05 })` records 5% of root tasks, so the buffer may hold little when the incident comes. See [Cut volume in production](#cut-volume-in-production).
 - **A `capacity` that is not a positive integer** (`0`, a negative number, `NaN`) means no limit.
 
+### Measure time and find open tasks
+
+An event has no time, so the recorder cannot tell you which handler is slow, how long a request lived before `cancel`, or whether a test left something running. `timingLogger` stamps the time on each event when it gets it and pairs `start` with the first closing phase (`done`, `error`, `cancel` or `drop`) of the same task.
+
+Pass it to the tracer next to the recorder: `createTracer` takes an array of loggers.
+
+<!-- docs-check: new -->
+
+```js
+// bus.js
+import { createBus } from "nanoeffects";
+import { createTraceRecorder, createTracer, timingLogger } from "nanoeffects/trace";
+
+// createTraceRecorder: events in the order they came
+export const recorder = createTraceRecorder();
+
+// timingLogger: the time of each event and the duration of tasks
+export const timing = timingLogger();
+
+// createTracer: both loggers get every event
+const trace = createTracer([recorder, timing]);
+
+export const bus = createBus({ trace });
+```
+
+```js
+// check.js
+import { timing } from "./bus";
+
+// durations: the tasks that ended, with the closing phase and the time in ms
+const slow = timing.durations.filter((task) => task.ms > 500);
+console.log(slow);
+
+// pending: the tasks that started and have not ended
+const leftovers = timing.pending();
+if (leftovers.length > 0) {
+  throw new Error(`${leftovers.length} tasks are still open`);
+}
+```
+
+What to know:
+
+- **The clock.** Time comes from `performance.now()`, or `Date.now()` where there is none. In a test pass your own clock: `timingLogger({ now })`.
+- **`capacity` cuts only `durations`.** `timingLogger({ capacity: 200 })` keeps the last 200 ended tasks. `pending()` is never cut: a leak shows up as a growing list.
+- **`clear()`** empties both lists. Call it between tests.
+- **The logger sees what the tracer lets through.** A task whose `start` was filtered out or not sampled gets no pair, and its ending is ignored.
+
+### Find the cause of an error
+
+An error arrives as one event, and you cannot see what led to it. `chainOf` builds the path from the root to a task by `parentId`. Give it the recorder: then the listeners that send no event (a plain handler that calls `ctx.emit`) are in the path too.
+
+```js
+// why.js
+import { chainOf } from "nanoeffects/trace";
+import { recorder } from "./bus";
+
+const failed = recorder.events.find((event) => event.phase === "error");
+
+// chainOf: the path from the root to the failed task
+const path = chainOf(recorder, failed.id);
+
+const text = path.map((step) => step.type).join(" → ");
+console.log(text); // queryChanged → searchLoaded
+```
+
+A step has `type`, and `effect` and `phase` (a listener with no events has neither), `source` and `traceGroupId` when known. If you pass a list of events (a snapshot, a file) instead of the recorder, the path holds only the tasks that have events.
+
+To see the path right in the console, turn on `chain` in `consoleLogger`:
+
+```js
+import { consoleLogger, createTracer } from "nanoeffects/trace";
+
+// consoleLogger: the line of an error ends with the path from the root
+const trace = createTracer(consoleLogger({ chain: true }));
+// [nanoeffects] render · run error (queryChanged → render)
+```
+
+`chain` remembers the last 1000 tasks. It is off by default.
+
 ### Configure Redux DevTools
 
 <!-- docs-check: new -->
@@ -8364,6 +8446,26 @@ const errorsOnly = (): TraceLogger => (event) => {
 };
 ```
 
+### Stop on an event
+
+You want the debugger to stop when a certain event comes. No API is needed for that: it is five lines in a logger of your own.
+
+```js
+import { createTracer } from "nanoeffects/trace";
+
+// A logger that stops in the debugger at the start of a task with this type
+const stopOn = (type) => (event) => {
+  if (event.type === type && event.phase === "start") {
+    debugger; // the browser stops here when DevTools is open
+  }
+};
+
+// createTracer: pass the logger like any other
+const trace = createTracer(stopOn("search"));
+```
+
+In the debugger read `event.payload` and walk up the stack: the synchronous part of the chain is all there.
+
 ## Drop tracing from a build
 
 Without a tracer the hooks cost almost nothing. `nanoeffects/trace` is only bundled when imported.
@@ -8382,35 +8484,21 @@ conditions: ["notrace"]
 In a build from the sources, `define: { __NANOEFFECTS_TRACE__: "false" }` does the same. With the condition set, that build’s types have no `trace` option: `createBus({ trace })` is a type error. `nanoeffects/trace` has no `notrace` build. The saving is about 0.4 kB gzip of the whole library.
 
 ---
-Source: docs/debugging-compared.md
+Source: docs/debugging-cases.md
 
-# Debugging compared with RxJS, Effector and mitt
+# Debugging cases
 
 > **Level F.** Read first: [Trace tasks](tracing.md#attach-a-tracer).
 
-Read this page if you know RxJS, Effector or mitt and want to know what nanoeffects gives you when something goes wrong, and what it does not. It compares what each tool shows, then answers three questions you ask in a debugger. It is not a migration guide: for that, see [RxJS](migrating-from-rxjs.md), [Effector](migrating-from-effector.md) and [mitt](migrating-from-mitt.md).
+Read this page when something goes wrong and you want to know who listens to an event, what began a chain, or why a request stopped. Each case below is a short snippet that you can run. For loops, see [Find and cut event loops](debugging-loops.md).
 
 ## On this page
 
-- [Compare what you can see](#compare-what-you-can-see)
 - [Find who listens to an event](#find-who-listens-to-an-event)
 - [Find which task began a chain](#find-which-task-began-a-chain)
 - [Find out why a request stopped](#find-out-why-a-request-stopped)
 - [Know what is missing](#know-what-is-missing)
 
-## Compare what you can see
-
-| Question | nanoeffects | RxJS | Effector | mitt / nanoevents |
-| -------- | ----------- | ---- | -------- | ----------------- |
-| Which task started which? | Yes: every task has `parentId` and `rootId` ([Trace tasks](tracing.md)) | You add `tap` per stream, or a tool such as [rxjs-spy](https://github.com/cartant/rxjs-spy) | Yes, through [`effector-logger`](https://github.com/effector/logger) and the [inspector](https://github.com/effector/inspector) | No |
-| Was a call cancelled or dropped? | Yes: the phases `cancel` and `drop` | An unsubscribe shows no event unless you add one | — | No |
-| A log of every emit | `tracePlugin` reports each emit, also with no listener | `tap` per stream | A logger over the units | A `"*"` listener |
-| A map of the app | `describeBus` before a run, `graphLogger` after ([Find and cut event loops](debugging-loops.md)) | Not built in | The graph of units, with names from the Babel/SWC plugin | `emitter.all` holds the handlers of each event (mitt) |
-| Find a loop | `graphLogger`, then `loopGuardPlugin` cuts it | — | — | No |
-| Test a flow | [`createMarbleBus`](testing.md): emits and phases as diagrams on fake timers; [`createTraceRecorder`](tracing.md#keep-the-last-events-for-an-incident) keeps the events | [Marble tests](https://rxjs.dev/guide/testing/marble-testing) | `fork` gives an isolated scope | You wire it yourself |
-
-A dash means that this page does not compare it. Read the table as a map of where to look, not as a score. Effector and RxJS also hold state and streams, which nanoeffects does not, so their tools cover more ground. nanoeffects covers one thing in depth: why an async handler ran, and why it stopped.
-
 ## Find who listens to an event
 
 **Problem.** You read an emit and want to know what it starts.
@@ -8515,7 +8603,7 @@ Details: [Trace tasks](tracing.md) and [Cancel stale requests](cancel-stale-requ
 
 ## Know what is missing
 
-- **No browser extension or UI of its own.** Use [Redux DevTools](tracing.md#configure-redux-devtools), the console or the Performance panel. Effector has an inspector for this.
+- **No browser extension or UI of its own.** Use [Redux DevTools](tracing.md#configure-redux-devtools), the console or the Performance panel.
 - **No map from the source code.** `describeBus` lists the listeners registered so far, and `graphLogger` shows the events that happened. A listener that is not registered yet is not on the map.
 - **No click-through from the log to the code.** With `tracePlugin({ source: true })` an event carries the `file:line:column` of its listener ([Find the line of a listener](tracing.md#find-the-line-of-a-listener)), but a link in a UI is yours to build.
 - **No names from a compiler.** Function names give a name for free; a minifier can shorten them, so use `traceId` where a name must stay stable.
@@ -8542,6 +8630,7 @@ A loop is two handlers that emit each other's events, or one handler that emits
 - [Cut a loop at run time](#cut-a-loop-at-run-time)
 - [Fail a test on a loop](#fail-a-test-on-a-loop)
 - [Export the graph and the payloads](#export-the-graph-and-the-payloads)
+- [Find listeners that never ran](#find-listeners-that-never-ran)
 - [Know how a loop is found](#know-how-a-loop-is-found)
 - [Know the limits](#know-the-limits)
 
@@ -8804,6 +8893,84 @@ console.log(JSON.stringify(data));
 
 A payload can be a class instance, a `Map`, a circular object or an `Error`, which a plain `JSON.stringify` cannot take. The exports make them plain JSON: an `Error` keeps its name, message, stack and cause, a cycle becomes `"[Circular]"`, a `Map` becomes `{ "$map": [...] }`, and an instance of a class keeps its own fields and its name as `$class`. Getters are never called, and a value that is too deep or too big is cut.
 
+## Find listeners that never ran
+
+A graph of one run shows what that run did. It cannot tell you which listeners the app has but no run ever reached: dead code, or a scenario nobody tests. To find them, join the graphs of several runs, then compare the result with the listeners the bus holds.
+
+Prerequisites: the bus uses `tracePlugin` and `graphLogger` (see [Find a loop](#find-a-loop)), and each listener has a function name or a `traceId`. An anonymous listener has no node in the graph, so it is never reported.
+
+1. Each run writes its graph to a file.
+2. A script reads the files and joins them with `mergeGraphs`.
+3. `findOrphans` compares the joined graph with `describeBus`.
+
+```js
+// bus.js
+import { createBus } from "nanoeffects";
+import { createTracer, graphLogger, tracePlugin } from "nanoeffects/trace";
+
+// graphLogger — the map of what ran
+export const graph = graphLogger({ name: "cart" });
+export const bus = createBus({ trace: createTracer(graph) }).use(tracePlugin());
+```
+
+```js
+// handlers.js
+import { bus } from "./bus";
+
+// the listener is named by its function; findOrphans matches this name
+bus.on("cart/added", function recalcTotal() {});
+bus.on("cart/cleared", function resetTotal() {});
+```
+
+```js
+// graph-setup.js (the setup file of your test runner)
+import { mkdirSync, writeFileSync } from "node:fs";
+import { afterAll } from "vitest";
+import { graph } from "./bus";
+
+afterAll(() => {
+  mkdirSync("graphs", { recursive: true });
+
+  // toJSON — the graph of this run as plain data
+  const data = graph.toJSON();
+  writeFileSync(`graphs/${process.pid}.json`, JSON.stringify(data));
+});
+```
+
+```js
+// orphans.js (run it after the tests)
+import { readdirSync, readFileSync } from "node:fs";
+import { describeBus, findOrphans, mergeGraphs } from "nanoeffects/trace";
+import { bus } from "./bus";
+import "./handlers";
+
+const files = readdirSync("graphs");
+const runs = files.map((file) => JSON.parse(readFileSync(`graphs/${file}`, "utf8")));
+
+// mergeGraphs — counts add up, so a listener that ran in any run is a node
+const all = mergeGraphs(...runs);
+
+// describeBus — the listeners the bus holds, by event
+const described = describeBus(bus);
+
+// findOrphans — the listeners the joined graph never saw run
+console.log(findOrphans(described, all));
+// [{ event: "cart/cleared", listener: "resetTotal", kind: "unemitted" }]
+```
+
+Each item has a `kind`:
+
+| `kind` | Meaning | What to check |
+| ------ | ------- | ------------- |
+| `unemitted` | Nothing emitted the event in any run. | Is the event still used? Is a scenario missing? |
+| `unrun` | The event was emitted, this listener did not run. | A condition or a [policy](policies.md) that never lets it run. |
+
+Read the list as a hint, not as a failure. With few runs it holds many false items, and it only becomes a signal when the runs cover the main scenarios. Know the limits:
+
+- Two listeners with one name are one node, so the second one is never reported. Give each a distinct name or `traceId`.
+- Merge runs of one build. A listener that was renamed shows up as an orphan.
+- `mergeGraphs` does not find a loop that only closes when the edges of two runs are joined. Use `graph.cycles()` in each run.
+
 ## Know how a loop is found
 
 `graphLogger` finds loops in two ways. They give two kinds of finding in `graph.cycles()`, told apart by `source`:

package/llms.txt

@@ -61,9 +61,9 @@ Rules that generated code often gets wrong:
 - [Semantics](docs/semantics.md): exact rules of emit, abort and ordering
 - [Keep the signal through a handler](docs/pass-the-signal.md): every way a policy handler loses `ctx.signal`, and the lint rules and `devPlugin` check that find it
 - [Test time with diagrams](docs/testing.md): `createMarbleBus` and `fakeTimersClock`; emits and phases as diagrams on fake timers
-- [Trace tasks](docs/tracing.md): loggers, Redux DevTools, `graphLogger`, the `notrace` build
-- [Debugging compared with RxJS, Effector and mitt](docs/debugging-compared.md): what you can see in each, and three debugging cases
-- [Find and cut event loops](docs/debugging-loops.md): symptoms, `graphLogger`, the graph as Mermaid, Graphviz or JSON, Redux DevTools
+- [Trace tasks](docs/tracing.md): loggers, `timingLogger` for durations and open tasks, `chainOf` for the cause of an error, Redux DevTools, `graphLogger`, the `notrace` build
+- [Debugging cases](docs/debugging-cases.md): who listens to an event, what began a chain, why a request stopped
+- [Find and cut event loops](docs/debugging-loops.md): symptoms, `graphLogger`, the graph as Mermaid, Graphviz or JSON, Redux DevTools, `mergeGraphs` and `findOrphans` for listeners no run reached
 - [Cut a loop with loopGuardPlugin](docs/loop-guard.md): limits on repeats, depth and emits from outside
 - [Turn events into Observables](docs/observable.md): `createObserve`, `Subject`, `events` (an event as a `for await` loop)
 - [Hot reload and development diagnostics](docs/hmr.md): `devPlugin`

package/package.json

@@ -1,6 +1,6 @@
 {
 	"name": "nanoeffects",
-	"version": "0.32.0",
+	"version": "0.33.0",
 	"description": "Business logic and side effects outside UI components, as plain async functions. Tiny, no dependencies.",
 	"keywords": [
 		"event-bus",

package/dist/tracer-mMDm5yE7.js

@@ -1,2 +0,0 @@
-import{i as e,n as t,r as n}from"./caller-DULg_ZYV.js";import{n as r,t as i}from"./onAbort-BgMfspK4.js";import{a,c as o,n as s,o as c,r as l,s as u}from"./context-Dp_QRXzb.js";import{n as d}from"./promise-CSLpzwSR.js";import{t as f}from"./origin-key-BbWN3gmN.js";import{t as p}from"./scope-key-B7l7mUS5.js";const m=/* @__PURE__ */ new WeakMap,h=e=>{let t=m.get(e);if(t)return t;let n=/* @__PURE__ */ new Map;return m.set(e,n),n},g=e=>m.get(e),_=(e,t,n)=>{let r=e.get(t)??[];r.push(n),e.set(t,r)},v=(e,t,n)=>{let r=e.get(t),i=r?.indexOf(n)??-1;!r||i<0||(r.splice(i,1),r.length===0&&e.delete(t))},y=(e,t,n)=>(e.get(t)??[]).findLast(e=>e.handler===n);let b;const x=()=>b,S=(e,t)=>{let n=b;b=e;try{return t()}finally{b=n}},C=(e,t,n={})=>{let{trace:r}=e;if(!r){e.emit(t);return}let{traceId:i,traceGroupId:a}=n,{ctx:o,unlink:c}=s({event:{type:i??t.type,payload:t,...a===void 0?{}:{traceGroupId:a}},bus:{emit:e.emit,on:e.on,off:e.off,ctx:e.ctx,addContext:e.addContext},tracer:r});u(o,`run`,`start`);try{o.emit(t),u(o,`run`,`done`)}catch(e){throw u(o,`run`,`error`,e),e}finally{c()}},w=e=>/^(.+):(\d+):(\d+)$/.exec(e)?e:void 0,T=e=>{let t=e.slice(3).replace(/^async /,``),n=t.lastIndexOf(` (`),r=n<0?t:t.slice(n+2).replace(/\)$/,``);return w(r)},E=e=>w(e.slice(e.indexOf(`@`)+1)),D=e=>{if(typeof e!=`string`)return[];let t=[];for(let n of e.split(`
-`)){let e=n.trim();e.startsWith(`at `)?t.push(T(e)):e.includes(`@`)&&t.push(E(e))}return t},O=(e,t)=>D(e)[t],k=e=>typeof e==`string`?e:Reflect.get(Object(e),`type`),A=(e,t)=>typeof e==`object`?Reflect.get(Object(e),`payload`):t[0],j=(r={})=>i=>{if(!(o&&i.trace))return i;let{trace:s}=i,u=(e,t)=>{let n=s.task({type:k(e),payload:A(e,t),leaf:!0},l());s.report(n,`emit`,`done`)},d=i.emit;i.emit=(e,...t)=>S(e,()=>(u(e,t),d(e,...t))),Reflect.set(i,f,(e,t)=>{C(i,e,t)});let p=h(i),m=(e,t,n)=>(r,i)=>(a(i,t,n),c(i,`run`,()=>e(r,i))),g=(e,t)=>{let n=Reflect.get(Object(t),`traceId`);return typeof n==`string`?n:e.name||void 0},b=r.source===!0;b&&n();let x=(e,t)=>e!==void 0||!b?e:typeof t==`string`?t:void 0,w=(e,t,n)=>{let r=x(e.name,t),i=typeof r==`string`?m(e.handler,r,e.source):e.handler;return n?(n,r)=>(v(p,t,e),i(n,r)):i},T=(n,r)=>{let i=(e,i,a)=>{let o=k(e),s=b?O(t(),2):void 0,c={handler:i,wrapper:i,name:g(i,a),source:s};c.wrapper=w(c,o,r),_(p,o,c);let l=n(e,c.wrapper,a);return()=>{v(p,o,c),l()}};return(t,n,r)=>e(()=>i(t,n,r))},E=i.off,D=(e,t)=>{if(e===void 0)p.clear();else if(t===void 0)p.delete(k(e));else{let n=y(p,k(e),t);n&&v(p,k(e),n),E(e,n?.wrapper??t);return}E(e,t)},j=i.on,M=i.once;return i.on=T(j,!1),i.once=T(M,!0),i.off=D,i},M=e=>{let t=typeof e==`function`?[e]:[...e??[]];return t.length===0?null:e=>{for(let n of t)try{n(e)}catch(e){r(`trace logger failed`,e)}}},N=()=>{},P=e=>{if(typeof e.traceGroupId==`string`)return e.traceGroupId;let t=x();if(typeof t!=`object`&&typeof t!=`function`||t===null)return;let n=Reflect.get(t,p),r=typeof n==`object`&&n?Reflect.get(n,`traceGroupId`):void 0;return typeof r==`string`?r:void 0},F=(e,t={})=>{let n=e,a=M(n),{filter:o,sample:s=1}=t,c=0,u=(Array.isArray(n)?n:[n]).flatMap(e=>e.task?[e.task]:[]),f=e=>{let t={ref:e,id:e.id,type:e.type};e.parentRef&&(t.parent=e.parentRef),e.event!==void 0&&(t.event=e.event),e.leaf&&(t.leaf=!0),t.emitted=e.emitted,e.group!==void 0&&(t.traceGroupId=e.group),e.source!==void 0&&(t.source=e.source);for(let e of u)try{e(t)}catch(e){r(`trace logger failed`,e)}},p=e=>typeof s==`function`?s({type:e.type,payload:e.payload}):Math.random()<s,m={task:(e,t)=>{let n={id:++c,root:t?.root??c,parent:t?.id,parentRef:u.length>0?t:void 0,leaf:e.leaf,emitted:l()===t,type:e.type,payload:e.payload,sampled:t?.sampled??p(e),group:P(e)??t?.group};return u.length>0&&n.sampled&&f(n),n},rename:(e,t,n)=>{e.event??=e.type,e.type=t,n!==void 0&&(e.source=n),u.length>0&&e.sampled&&f(e)},report:(e,t,n,r)=>{if(!e.sampled)return;let i={id:e.id,type:e.type,effect:t,phase:n,payload:e.payload};typeof e.parent==`number`&&(i.parentId=e.parent),e.root!==e.id&&(i.rootId=e.root),e.group!==void 0&&(i.traceGroupId=e.group),e.source!==void 0&&(i.source=e.source),n===`error`&&(i.error=r),(!o||o(i))&&a?.(i)},settler:(e,t)=>{if(!e.sampled)return N;let n=!1;return(r,i)=>{n||(n=!0,m.report(e,t,r,i))}},run:(e,t,n,r)=>{if(!e.sampled)return r();let a=m.settler(e,t);m.report(e,t,`start`),i({signal:n},()=>a(`cancel`));let o;try{o=r()}catch(e){throw a(`error`,e),e}return d(o)?Promise.resolve(o).then(e=>(a(`done`),e),e=>{throw a(`error`,e),e}):(a(`done`),o)}};return m};export{j as n,g as r,F as t};