mycomesh-consumer 0.1.22 → 0.1.24

package/README.md

@@ -1,9 +1,9 @@
 # mycomesh-consumer
 
 Local-first launcher and request CLI for the MycoMesh OpenAI-compatible
-Consumer edge. With no arguments it starts the pinned Docker runtime, opens the
-wallet and funding page, waits for prepaid access, and opens Codex through the
-loopback proxy.
+Consumer edge. With no arguments it starts the pinned Docker runtime, opens a
+local page containing the export URL and payment key, and opens Codex through
+the loopback proxy.
 
 The package is published as `mycomesh-consumer`. `mycomesh-consumer` and the
 short `mycomesh` command are equivalent.
@@ -13,7 +13,6 @@ short `mycomesh` command are equivalent.
 - Node.js 20 or newer
 - Docker Desktop/Engine with Compose V2
 - The official Codex dependency installed with this npm package
-- An injected browser wallet on Sepolia with enough ETH for transaction gas
 
 For local development, install it directly from the repository:
 
@@ -29,11 +28,10 @@ mycomesh-consumer
 ```
 
 No checkout, separate Codex install, host Python, GNU Make, public Gateway URL, or command arguments are
-required. The command always prints the local onboarding URL and opens it when
-possible. Connect the wallet, mint or transfer test tUSDC, and authorize prepaid
-access once; Codex opens after `/ready` confirms access is ready. Wallet keys stay
-in the browser wallet. Consumer credentials, transport identity, and payment
-state stay in a protected Docker volume.
+required. The command prints the local credentials URL and opens it when
+possible. The page contains only `OPENAI_BASE_URL` and `OPENAI_API_KEY` exports;
+the payment key is generated and persisted in a protected Docker volume. No
+wallet signature or browser session is required.
 
 The runtime image is pinned by digest. Stop it without deleting state with:
 
@@ -47,24 +45,19 @@ local proxy running. Consumer network traffic is direct by default. Use
 hosts are translated to `host.docker.internal`. Dedicated
 `MYCOMESH_CONSUMER_*_PROXY` variables remain available for operators.
 
-Upgrading the npm package does not require clearing prepaid access. The Consumer
-volume is intentionally reused so its API key, identity and verified payment
-route survive restarts. If the browser page is stuck on an old local record,
-close that tab and reopen the printed onboarding URL, or clear site data for
-`http://127.0.0.1:8110` in the browser. To reset all local Consumer state,
+Upgrading the npm package does not require clearing the payment key. The
+Consumer volume is intentionally reused so its key and routing state survive
+restarts. To reset all local Consumer state,
 use the explicit, confirmed reset command:
 
 ```sh
 mycomesh-consumer --reset-local
 ```
 
-If Codex reports an interrupted request, stop Codex, run
-`mycomesh-consumer --no-codex`, open the local page, and click **Refresh prepaid
-access**. The Consumer handles the previous payment state without replaying it.
+If Codex reports an interrupted request, stop Codex and run
+`mycomesh-consumer --no-codex` to restart the local edge.
 
-This removes the local API key, identity, wallet metadata and local payment
-records. Any pending payment authorization remains managed separately. The
-command asks you to type `RESET`
+This removes the local payment key and Consumer state. The command asks you to type `RESET`
 and removes only the fixed Consumer Compose project and its protected volume.
 
 The existing stateless API commands remain available. For example:
@@ -102,8 +95,8 @@ export MYCOMESH_BASE_URL=http://127.0.0.1:8110/v1
 export MYCOMESH_API_KEY='replace-with-local-consumer-key'
 ```
 
-The local proxy selects the current prepaid access automatically. No session
-identifier or per-request wallet signature is needed. A public Gateway can
+The local proxy selects a healthy Relay and authorizes each request with the
+persisted payment key. No session identifier or per-request wallet signature is needed. A public Gateway can
 still be used explicitly with `--base-url`, but it is never the default.
 
 ## Commands
@@ -125,7 +118,7 @@ mycomesh chat \
 ```
 
 The request CLI sends standard OpenAI-shaped requests. The local proxy binds
-each request to the current prepaid access automatically.
+each request to the persisted payment key automatically.
 
 Use `--stream` to request SSE. SSE bytes are forwarded to stdout as they arrive,
 without rewriting event boundaries:

package/consumer.compose.yml

@@ -37,15 +37,11 @@ services:
     working_dir: /data
     environment:
       MYCOMESH_CONSUMER_DATA_DIR: /data
-      MYCOMESH_CONSUMER_NETWORK_CONFIG: /app/deployments/sepolia-provider-network-v6.json
+      MYCOMESH_CONSUMER_NETWORK_CONFIG: /app/deployments/sepolia-provider-network-v7.json
       MYCOMESH_CONSUMER_PUBLIC_BASE_URL: http://127.0.0.1:8110/v1
-      MYCOMESH_CONSUMER_WEB_DIR: /app/web
-      MYCOMESH_CONSUMER_DISCOVERY_URLS: ${MYCOMESH_CONSUMER_DISCOVERY_URLS:-}
-      MYCOMESH_CONSUMER_SESSION_LIFETIME_SECONDS: ${MYCOMESH_CONSUMER_SESSION_LIFETIME_SECONDS:-86400}
-      MYCOMESH_CONSUMER_SESSION_MAX_AMOUNT_UNITS: ${MYCOMESH_CONSUMER_SESSION_MAX_AMOUNT_UNITS:-10000000}
-      MYCOMESH_CONSUMER_REQUEST_TIMEOUT_SECONDS: ${MYCOMESH_CONSUMER_REQUEST_TIMEOUT_SECONDS:-300}
-      MYCOMESH_CONSUMER_MAX_REQUEST_BYTES: ${MYCOMESH_CONSUMER_MAX_REQUEST_BYTES:-1048576}
-      MYCOMESH_CONSUMER_REQUEST_BODY_TIMEOUT_SECONDS: ${MYCOMESH_CONSUMER_REQUEST_BODY_TIMEOUT_SECONDS:-30}
+      MYCOMESH_V7_RELAY_URLS: ${MYCOMESH_V7_RELAY_URLS:-https://bridge.mycomesh.xyz}
+      MYCOMESH_V7_MAX_FEE_UNITS: ${MYCOMESH_V7_MAX_FEE_UNITS:-100000}
+      MYCOMESH_V7_REQUEST_TIMEOUT_SECONDS: ${MYCOMESH_V7_REQUEST_TIMEOUT_SECONDS:-300}
       HTTP_PROXY: ${MYCOMESH_CONSUMER_HTTP_PROXY:-}
       HTTPS_PROXY: ${MYCOMESH_CONSUMER_HTTPS_PROXY:-}
       ALL_PROXY: ${MYCOMESH_CONSUMER_ALL_PROXY:-}
@@ -76,7 +72,7 @@ services:
       timeout: 5s
       retries: 4
       start_period: 10s
-    entrypoint: ["python", "-m", "gateway.local_consumer"]
+    entrypoint: ["python", "-m", "gateway.consumer_v7"]
     command: ["serve", "--host", "0.0.0.0", "--port", "8110"]
 
 volumes:

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "mycomesh-consumer",
-  "version": "0.1.22",
+  "version": "0.1.24",
   "description": "Local-first MycoMesh Consumer launcher and OpenAI-compatible request CLI.",
   "publishConfig": {
     "access": "public"

package/scripts/start-consumer.sh

@@ -104,7 +104,7 @@ compose() {
 
 open_browser() {
   local url="$1" opener=""
-  printf 'MycoMesh Consumer onboarding: %s\n' "$url"
+  printf 'MycoMesh Consumer credentials: %s\n' "$url"
   ((NO_BROWSER)) && return
   case "$(uname -s 2>/dev/null || printf unknown)" in
     Darwin) opener=open ;;
@@ -173,7 +173,7 @@ if ! compose up -d --wait --wait-timeout 90 consumer; then
   "$DOCKER" compose --project-name "$PROJECT_NAME" --file "$COMPOSE_FILE" logs --tail=120 consumer >&2 || true
   exit 1
 fi
-url="http://127.0.0.1:8110/app/playground"
+url="http://127.0.0.1:8110/"
 open_browser "$url"
 
 if ((DRY_RUN || NO_CODEX)); then
@@ -182,7 +182,7 @@ if ((DRY_RUN || NO_CODEX)); then
   exit 0
 fi
 
-printf '%s\n' "Waiting for the browser to make prepaid access ready..."
+printf '%s\n' "Waiting for a healthy Settlement V7 Relay..."
 command -v curl >/dev/null 2>&1 || die "curl is required while waiting for wallet onboarding"
 started_at="$(date +%s)"
 while ! curl --noproxy '*' --fail --silent --max-time 3 http://127.0.0.1:8110/ready >/dev/null 2>&1; do
@@ -192,7 +192,7 @@ while ! curl --noproxy '*' --fail --silent --max-time 3 http://127.0.0.1:8110/re
   sleep 2
 done
 
-if ! codex_env="$("$DOCKER" compose --project-name "$PROJECT_NAME" --file "$COMPOSE_FILE" exec -T consumer python -m gateway.local_consumer codex-env)"; then
+if ! codex_env="$("$DOCKER" compose --project-name "$PROJECT_NAME" --file "$COMPOSE_FILE" exec -T consumer python -m gateway.consumer_v7 codex-env)"; then
   die "could not load Codex credentials from the local Consumer"
 fi
 eval "$codex_env"
@@ -209,7 +209,7 @@ codex_command=(
   -c 'model_provider="mycomesh"' \
   -c 'model_providers.mycomesh.name="MycoMesh"' \
   -c 'model_providers.mycomesh.base_url="http://127.0.0.1:8110/v1"' \
-  -c 'model_providers.mycomesh.env_key="MYCOMESH_API_KEY"' \
+  -c 'model_providers.mycomesh.env_key="OPENAI_API_KEY"' \
   -c 'model_providers.mycomesh.wire_api="responses"'
 )
 if ((${#CODEX_ARGS[@]})); then

package/src/cli.mjs

@@ -1,7 +1,7 @@
 import { once } from "node:events";
 import { readFile } from "node:fs/promises";
 
-const CLI_VERSION = "0.1.22";
+const CLI_VERSION = "0.1.24";
 // The npm client is local-first. A public Gateway is an explicit override;
 // the default remains the loopback Consumer edge so a blocked domain cannot
 // strand the Codex client.

package/src/consumer.mjs

@@ -2,9 +2,9 @@ import { spawn as defaultSpawn } from "node:child_process";
 import { createRequire } from "node:module";
 import { fileURLToPath } from "node:url";
 
-const CONSUMER_RELEASE_VERSION = "0.1.22";
+const CONSUMER_RELEASE_VERSION = "0.1.24";
 const DEFAULT_NODE_IMAGE =
-  "ghcr.io/charleslzp/mycomesh-node@sha256:a68da8364725688422ee9e7b4a6f13094b0ef1b0f6786b8296b38b3382e59e0e";
+  "ghcr.io/charleslzp/mycomesh-node@sha256:bdbefd69c3dcb622717e71917e06f7da3d2a25dd8fe8e4effcccb3fd79a7929b";
 const API_COMMANDS = new Set(["health", "models", "responses", "chat"]);
 const API_VALUE_OPTIONS = new Set([
   "--base-url",
@@ -25,17 +25,17 @@ const HELP = `Usage: mycomesh-consumer [options] [-- codex-options]
 
 Start the local MycoMesh Consumer. No options are needed.
 
-The default command starts the pinned Docker runtime, opens the local wallet
-and funding page, waits for prepaid access, then opens Codex through
+The default command starts the pinned Docker runtime, opens the local
+credentials page with the export URL and payment key, then opens Codex through
 the loopback Consumer at http://127.0.0.1:8110/v1.
 
 Options:
-  --no-browser          Print the onboarding URL without opening it
-  --no-codex            Start the Consumer and browser without opening Codex
-  --stop                Stop the Consumer without deleting its wallet state
+  --no-browser          Print the credentials URL without opening it
+  --no-codex            Start the Consumer and credentials page without Codex
+  --stop                Stop the Consumer without deleting its payment key
   --reset-local         Confirm and delete the local Consumer volume
   --codex-command PATH  Codex executable (default: codex)
-  --ready-timeout SEC   Wallet onboarding timeout (default: 1800)
+  --ready-timeout SEC   Relay readiness timeout (default: 1800)
   --proxy URL           Optional proxy for Consumer network traffic
   --node-image IMAGE    Advanced: override the pinned Consumer image
   --dry-run             Print the planned Docker operations
@@ -48,9 +48,8 @@ Existing API commands remain available:
   mycomesh-consumer responses "hello"
   mycomesh-consumer chat "hello"
 
-Docker Desktop/Engine is required. The package installs official Codex and
-wallet keys remain in the browser wallet; local Consumer credentials and
-payment state remain in a protected Docker volume.`;
+Docker Desktop/Engine is required. The payment key and Consumer state remain
+in a protected Docker volume; no wallet signature or browser session is used.`;
 
 class ConsumerCliError extends Error {
   constructor(message, exitCode = 1) {