mxcad 1.0.99 → 1.0.100

package/dist/mxcad.d.ts

@@ -770,7 +770,12 @@ export declare class MxCADSelectionSet extends McRxObject {
 }
 export declare class MxCADUiPrBase {
 	protected imp: any;
+	protected mxobj: MxDrawObject;
 	constructor(imp: any);
+	doc2cad1(pt: THREE.Vector3): McGePoint3d;
+	doc2cad2(x: number, y: number, z: number): McGePoint3d;
+	cad2doc1(pt: McGePoint3d): THREE.Vector3;
+	cad2doc2(x: number, y: number, z: number): THREE.Vector3;
 	/**
    * 返回关键字列表
    * @returns 关键词列表
@@ -893,10 +898,10 @@ export declare class MxCADUiPrPoint extends MxCADUiPrBase {
 	 */
 	value(): McGePoint3d;
 	/**
-	 * 得到 MxCAD下CAD图纸坐标.
+	 * 得到 Three.js 坐标.
 	 * @returns 点对象 MdGePoint3d
 	 */
-	getCADValue(): McGePoint3d;
+	getDocValue(): McGePoint3d;
 	/**
 	 * 得到动态拖动的基点
 	 * @returns 基点 THREE.THREE.Vector3
@@ -1029,7 +1034,7 @@ export declare class MxCADUiPrEntity extends MxCADUiPrBase {
 	 * 得以获取对象时的输入点的CAD图纸坐标.
 	 * @returns 点对象 MdGePoint3d
 	 */
-	getCADPickPoint(): McGePoint3d;
+	getDocPickPoint(): McGePoint3d;
 }
 /**
  * 表示数据库实体。
@@ -2545,6 +2550,10 @@ export declare class McObject {
 	 * @returns 对象实现
 	 */
 	getImp(): any;
+	/**
+	 * 重绘图上所有对象.
+	 */
+	regen(): void;
 	/**
 	 * 显示全部
 	 */
@@ -2693,6 +2702,12 @@ export declare class McObject {
 	 * @param val 绘制颜色
 	 */
 	set drawColor(val: McCmColor);
+	get drawColorIndex(): number;
+	/**
+	 * 设置绘制颜色
+	 * @param val 绘制颜色
+	 */
+	set drawColorIndex(val: number);
 	/**
 	 * 获取绘制线宽
 	 * @returns 返回绘制线宽
@@ -2747,7 +2762,7 @@ export declare class McObject {
 	 * 添加图层
 	 * @param pszName 图层名称
 	 */
-	addLayer(pszName: string): void;
+	addLayer(string: string): void;
 	/**
 	 * 添加文字样式
 	 * @param pszName 样式名称
@@ -2755,20 +2770,20 @@ export declare class McObject {
 	 * @param pszBigFontFileName 大字体文件名
 	 * @param dXScale X 方向缩放比例
 	 */
-	addTextStyle(pszName: string, pszFileName: string, pszBigFontFileName: string, dXScale: number): void;
+	addTextStyle(sName: string, sFileName: string, sBigFontFileName: string, dXScale: number): void;
 	/**
 	 * 添加线型
 	 * @param pszName 线型名称
 	 * @param pszLineDefine 线型定义
 	 */
-	addLinetype(pszName: string, pszLineDefine: string): void;
+	addLinetype(sName: string, sLineDefine: string): void;
 	/**
 	 * 添加线型
 	 * @param pszName 线型名称
 	 * @param pszLineDefine 线型定义
 	 * @param pszTextStyle 文字样式
 	 */
-	addLinetypeEx(pszName: string, pszLineDefine: string, pszTextStyle: string): void;
+	addLinetypeEx(sName: string, sLineDefine: string, sTextStyle: string): void;
 	/**
 	 * 绘制直线
 	 * @param dX1 起点 X 坐标
@@ -2779,7 +2794,8 @@ export declare class McObject {
 	 * @param dZ2 终点 Z 坐标
 	 * @returns 绘制的直线 ID
 	 */
-	drawLine(dX1: number, dY1: number, dZ1: number, dX2: number, dY2: number, dZ2: number): number;
+	drawLine(dX1: number, dY1: number, dX2: number, dY2: number): number;
+	drawLine3d(dX1: number, dY1: number, dZ1: number, dX2: number, dY2: number, dZ2: number): number;
 	/**
 	 * 添加标注样式
 	 * @param pszName 样式名称
@@ -2798,6 +2814,14 @@ export declare class McObject {
 	 * @param val 样式名称
 	 */
 	set drawDimStyle(val: string);
+	/**
+	 * 把当前路径做上排除标记，主要用于填充的绘制，把这个路径组成的闭合区域在填充中挖去
+	 */
+	pathMakeExclude(isExclude: boolean): void;
+	/**
+	 * 增加一个图案定义
+	 */
+	addPatternDefinition(sName: string, sDefinitionData: string): void;
 	/**
 	 * 获取当前绘制的线型定义
 	 */
@@ -2810,12 +2834,12 @@ export declare class McObject {
 	/**
 	 * 获取当前绘制的线宽
 	 */
-	get drawLineWidth(): string;
+	get drawLineWidth(): number;
 	/**
 	 * 设置当前绘制的线宽
 	 * @param val 线宽
 	 */
-	set drawLineWidth(val: string);
+	set drawLineWidth(val: number);
 	/**
 	 * 绘制圆弧
 	 * @param dCenterX 圆心 X 坐标
@@ -2836,6 +2860,15 @@ export declare class McObject {
 	 * @param dEndPointY 结束点 Y 坐标
 	 */
 	drawArc2(dStartPointX: number, dStartPointY: number, dMidPointX: number, dMidPointY: number, dEndPointX: number, dEndPointY: number): any;
+	/**
+	* 绘制圆弧
+	* @param dStartPointX 起始点 X 坐标
+	* @param dStartPointY 起始点 Y 坐标
+	* @param dEndPointX 结束点 X 坐标
+	* @param dEndPointY 结束点 Y 坐标
+	* @param dBulge 凸度
+	*/
+	drawArc3(dStartPointX: number, dStartPointY: number, dEndPointX: number, dEndPointY: number, dBulge: number): any;
 	/**
 	 * 绘制圆
 	 * @param dCenterX 圆心 X 坐标
@@ -2894,7 +2927,7 @@ export declare class McObject {
 	 * @param iAttachment 对齐方式
 	 * @returns 成功返回 1，失败返回 0
 	 */
-	drawMText(dPosX: number, dPosY: number, pszContents: string, dHeight: number, dWidth: number, dRotation: number, iAttachment: number): number;
+	drawMText(dPosX: number, dPosY: number, sContents: string, dHeight: number, dWidth: number, dRotation: number, iAttachment: number): number;
 	/**
 	 * 绘制单行文本
 	 * @param dPosX 文本位置 X 坐标
@@ -2916,7 +2949,7 @@ export declare class McObject {
 	 * @param dAng 旋转角度，单位为弧度
 	 * @returns 成功返回 1，失败返回 0
 	 */
-	drawBlockReference(dPosX: number, dPosY: number, pszBlkName: number, dScale: number, dAng: number): number;
+	drawBlockReference(dPosX: number, dPosY: number, sBlkName: string, dScale: number, dAng: number): number;
 	/**
 	 * 绘制对齐标注
 	 * @param dExtLine1PointX 第一条尺线起点 X 坐标
@@ -3065,11 +3098,15 @@ export declare class McObject {
 	/**
 	* 当前绘图坐标到CAD图纸坐标.
    */
-	docCoord2Cad(pt: McGePoint3d): McGePoint3d;
+	doc2cad(pt: McGePoint3d): McGePoint3d;
 	/**
    * CAD图纸坐标到当前绘图坐标
   */
-	cadCoord2Doc(pt: McGePoint3d): McGePoint3d;
+	cad2doc(pt: McGePoint3d): McGePoint3d;
+	doc2cad1(pt: THREE.Vector3): McGePoint3d;
+	doc2cad2(x: number, y: number, z: number): McGePoint3d;
+	cad2doc1(pt: McGePoint3d): THREE.Vector3;
+	cad2doc2(x: number, y: number, z: number): THREE.Vector3;
 	/**
 	 * 更新显示
 	*/