mxcad-app 1.0.28 → 1.0.30

package/dist/mxcadAppAssets/plugins/test.js

@@ -3900,5 +3900,5 @@ vec4 envMapTexelToLinear(vec4 color) {
 `),Re=["vec3 specularFactor = specular;","#ifdef USE_SPECULARMAP","	vec4 texelSpecular = texture2D( specularMap, vUv );","	texelSpecular = sRGBToLinear( texelSpecular );","	// reads channel RGB, compatible with a glTF Specular-Glossiness (RGBA) texture","	specularFactor *= texelSpecular.rgb;","#endif"].join(`
 `),Se=["float glossinessFactor = glossiness;","#ifdef USE_GLOSSINESSMAP","	vec4 texelGlossiness = texture2D( glossinessMap, vUv );","	// reads channel A, compatible with a glTF Specular-Glossiness (RGBA) texture","	glossinessFactor *= texelGlossiness.a;","#endif"].join(`
 `),et=["PhysicalMaterial material;","material.diffuseColor = diffuseColor.rgb;","vec3 dxy = max( abs( dFdx( geometryNormal ) ), abs( dFdy( geometryNormal ) ) );","float geometryRoughness = max( max( dxy.x, dxy.y ), dxy.z );","material.specularRoughness = max( 1.0 - glossinessFactor, 0.0525 );// 0.0525 corresponds to the base mip of a 256 cubemap.","material.specularRoughness += geometryRoughness;","material.specularRoughness = min( material.specularRoughness, 1.0 );","material.specularColor = specularFactor.rgb;"].join(`
-`),Oe={specular:{value:new ti().setHex(16777215)},glossiness:{value:1},specularMap:{value:null},glossinessMap:{value:null}};this._extraUniforms=Oe,this.onBeforeCompile=function(qe){for(var tt in Oe)qe.uniforms[tt]=Oe[tt];qe.fragmentShader=qe.fragmentShader.replace("uniform float roughness;","uniform vec3 specular;"),qe.fragmentShader=qe.fragmentShader.replace("uniform float metalness;","uniform float glossiness;"),qe.fragmentShader=qe.fragmentShader.replace("#include <roughnessmap_pars_fragment>",pe),qe.fragmentShader=qe.fragmentShader.replace("#include <metalnessmap_pars_fragment>",ze),qe.fragmentShader=qe.fragmentShader.replace("#include <roughnessmap_fragment>",Re),qe.fragmentShader=qe.fragmentShader.replace("#include <metalnessmap_fragment>",Se),qe.fragmentShader=qe.fragmentShader.replace("#include <lights_physical_fragment>",et)},Object.defineProperties(this,{specular:{get:function(){return Oe.specular.value},set:function(qe){Oe.specular.value=qe}},specularMap:{get:function(){return Oe.specularMap.value},set:function(qe){Oe.specularMap.value=qe}},glossiness:{get:function(){return Oe.glossiness.value},set:function(qe){Oe.glossiness.value=qe}},glossinessMap:{get:function(){return Oe.glossinessMap.value},set:function(qe){Oe.glossinessMap.value=qe,qe?(this.defines.USE_GLOSSINESSMAP="",this.defines.USE_ROUGHNESSMAP=""):(delete this.defines.USE_ROUGHNESSMAP,delete this.defines.USE_GLOSSINESSMAP)}}}),delete this.metalness,delete this.roughness,delete this.metalnessMap,delete this.roughnessMap,this.setValues(be)}E.prototype=Object.create(Xr.prototype),E.prototype.constructor=E,E.prototype.copy=function(be){return Xr.prototype.copy.call(this,be),this.specularMap=be.specularMap,this.specular.copy(be.specular),this.glossinessMap=be.glossinessMap,this.glossiness=be.glossiness,delete this.metalness,delete this.roughness,delete this.metalnessMap,delete this.roughnessMap,this};function P(){return{name:n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS,specularGlossinessParams:["color","map","lightMap","lightMapIntensity","aoMap","aoMapIntensity","emissive","emissiveIntensity","emissiveMap","bumpMap","bumpScale","normalMap","normalMapType","displacementMap","displacementScale","displacementBias","specularMap","specular","glossinessMap","glossiness","alphaMap","envMap","envMapIntensity","refractionRatio"],getMaterialType:function(){return E},extendParams:function(be,pe,ze){var Re=pe.extensions[this.name];be.color=new ti(1,1,1),be.opacity=1;var Se=[];if(Array.isArray(Re.diffuseFactor)){var et=Re.diffuseFactor;be.color.fromArray(et),be.opacity=et[3]}if(Re.diffuseTexture!==void 0&&Se.push(ze.assignTexture(be,"map",Re.diffuseTexture)),be.emissive=new ti(0,0,0),be.glossiness=Re.glossinessFactor!==void 0?Re.glossinessFactor:1,be.specular=new ti(1,1,1),Array.isArray(Re.specularFactor)&&be.specular.fromArray(Re.specularFactor),Re.specularGlossinessTexture!==void 0){var Oe=Re.specularGlossinessTexture;Se.push(ze.assignTexture(be,"glossinessMap",Oe)),Se.push(ze.assignTexture(be,"specularMap",Oe))}return Promise.all(Se)},createMaterial:function(be){var pe=new E(be);return pe.fog=!0,pe.color=be.color,pe.map=be.map===void 0?null:be.map,pe.lightMap=null,pe.lightMapIntensity=1,pe.aoMap=be.aoMap===void 0?null:be.aoMap,pe.aoMapIntensity=1,pe.emissive=be.emissive,pe.emissiveIntensity=1,pe.emissiveMap=be.emissiveMap===void 0?null:be.emissiveMap,pe.bumpMap=be.bumpMap===void 0?null:be.bumpMap,pe.bumpScale=1,pe.normalMap=be.normalMap===void 0?null:be.normalMap,pe.normalMapType=pl,be.normalScale&&(pe.normalScale=be.normalScale),pe.displacementMap=null,pe.displacementScale=1,pe.displacementBias=0,pe.specularMap=be.specularMap===void 0?null:be.specularMap,pe.specular=be.specular,pe.glossinessMap=be.glossinessMap===void 0?null:be.glossinessMap,pe.glossiness=be.glossiness,pe.alphaMap=null,pe.envMap=be.envMap===void 0?null:be.envMap,pe.envMapIntensity=1,pe.refractionRatio=.98,pe}}}function I(){this.name=n.KHR_MESH_QUANTIZATION}function z(be,pe,ze,Re){Kr.call(this,be,pe,ze,Re)}z.prototype=Object.create(Kr.prototype),z.prototype.constructor=z,z.prototype.copySampleValue_=function(be){for(var pe=this.resultBuffer,ze=this.sampleValues,Re=this.valueSize,Se=be*Re*3+Re,et=0;et!==Re;et++)pe[et]=ze[Se+et];return pe},z.prototype.beforeStart_=z.prototype.copySampleValue_,z.prototype.afterEnd_=z.prototype.copySampleValue_,z.prototype.interpolate_=function(be,pe,ze,Re){for(var Se=this.resultBuffer,et=this.sampleValues,Oe=this.valueSize,qe=Oe*2,tt=Oe*3,Ge=Re-pe,at=(ze-pe)/Ge,mt=at*at,Lt=mt*at,oi=be*tt,wi=oi-tt,le=-2*Lt+3*mt,Ee=Lt-mt,Tt=1-le,bt=Ee-mt+at,Ai=0;Ai!==Oe;Ai++){var gi=et[wi+Ai+Oe],li=et[wi+Ai+qe]*Ge,xi=et[oi+Ai+Oe],Si=et[oi+Ai]*Ge;Se[Ai]=Tt*gi+bt*li+le*xi+Ee*Si}return Se};var k={FLOAT:5126,FLOAT_MAT3:35675,FLOAT_MAT4:35676,FLOAT_VEC2:35664,FLOAT_VEC3:35665,FLOAT_VEC4:35666,LINEAR:9729,REPEAT:10497,SAMPLER_2D:35678,POINTS:0,LINES:1,LINE_LOOP:2,LINE_STRIP:3,TRIANGLES:4,TRIANGLE_STRIP:5,TRIANGLE_FAN:6,UNSIGNED_BYTE:5121,UNSIGNED_SHORT:5123},G={5120:Int8Array,5121:Uint8Array,5122:Int16Array,5123:Uint16Array,5125:Uint32Array,5126:Float32Array},q={9728:Yn,9729:$n,9984:Ef,9985:iv,9986:Pf,9987:Sc},Z={33071:Rr,33648:Oh,10497:dl},re={SCALAR:1,VEC2:2,VEC3:3,VEC4:4,MAT2:4,MAT3:9,MAT4:16},ie={POSITION:"position",NORMAL:"normal",TANGENT:"tangent",TEXCOORD_0:"uv",TEXCOORD_1:"uv2",COLOR_0:"color",WEIGHTS_0:"skinWeight",JOINTS_0:"skinIndex"},ae={scale:"scale",translation:"position",rotation:"quaternion",weights:"morphTargetInfluences"},Ae={CUBICSPLINE:void 0,LINEAR:Ec,STEP:Hh},me={OPAQUE:"OPAQUE",MASK:"MASK",BLEND:"BLEND"},Ie={"image/png":No,"image/jpeg":zs};function Xe(be,pe){return typeof be!="string"||be===""?"":(/^https?:\/\//i.test(pe)&&/^\//.test(be)&&(pe=pe.replace(/(^https?:\/\/[^\/]+).*/i,"$1")),/^(https?:)?\/\//i.test(be)||/^data:.*,.*$/i.test(be)||/^blob:.*$/i.test(be)?be:pe+be)}function je(be){return be.DefaultMaterial===void 0&&(be.DefaultMaterial=new Xr({color:16777215,emissive:0,metalness:1,roughness:1,transparent:!1,depthTest:!0,side:wc})),be.DefaultMaterial}function De(be,pe,ze){for(var Re in ze.extensions)be[Re]===void 0&&(pe.userData.gltfExtensions=pe.userData.gltfExtensions||{},pe.userData.gltfExtensions[Re]=ze.extensions[Re])}function Le(be,pe){pe.extras!==void 0&&(typeof pe.extras=="object"?Object.assign(be.userData,pe.extras):console.warn("THREE.GLTFLoader: Ignoring primitive type .extras, "+pe.extras))}function He(be,pe,ze){for(var Re=!1,Se=!1,et=0,Oe=pe.length;et<Oe;et++){var qe=pe[et];if(qe.POSITION!==void 0&&(Re=!0),qe.NORMAL!==void 0&&(Se=!0),Re&&Se)break}if(!Re&&!Se)return Promise.resolve(be);for(var tt=[],Ge=[],et=0,Oe=pe.length;et<Oe;et++){var qe=pe[et];if(Re){var at=qe.POSITION!==void 0?ze.getDependency("accessor",qe.POSITION):be.attributes.position;tt.push(at)}if(Se){var at=qe.NORMAL!==void 0?ze.getDependency("accessor",qe.NORMAL):be.attributes.normal;Ge.push(at)}}return Promise.all([Promise.all(tt),Promise.all(Ge)]).then(function(mt){var Lt=mt[0],oi=mt[1];return Re&&(be.morphAttributes.position=Lt),Se&&(be.morphAttributes.normal=oi),be.morphTargetsRelative=!0,be})}function Ue(be,pe){if(be.updateMorphTargets(),pe.weights!==void 0)for(var ze=0,Re=pe.weights.length;ze<Re;ze++)be.morphTargetInfluences[ze]=pe.weights[ze];if(pe.extras&&Array.isArray(pe.extras.targetNames)){var Se=pe.extras.targetNames;if(be.morphTargetInfluences.length===Se.length){be.morphTargetDictionary={};for(var ze=0,Re=Se.length;ze<Re;ze++)be.morphTargetDictionary[Se[ze]]=ze}else console.warn("THREE.GLTFLoader: Invalid extras.targetNames length. Ignoring names.")}}function ot(be){var pe=be.extensions&&be.extensions[n.KHR_DRACO_MESH_COMPRESSION],ze;return pe?ze="draco:"+pe.bufferView+":"+pe.indices+":"+Ct(pe.attributes):ze=be.indices+":"+Ct(be.attributes)+":"+be.mode,ze}function Ct(be){for(var pe="",ze=Object.keys(be).sort(),Re=0,Se=ze.length;Re<Se;Re++)pe+=ze[Re]+":"+be[ze[Re]]+";";return pe}function ft(be,pe,ze){this.json=be||{},this.extensions=pe||{},this.options=ze||{},this.cache=new t,this.primitiveCache={},this.textureLoader=new Im(this.options.manager),this.textureLoader.setCrossOrigin(this.options.crossOrigin),this.fileLoader=new Co(this.options.manager),this.fileLoader.setResponseType("arraybuffer"),this.options.crossOrigin==="use-credentials"&&this.fileLoader.setWithCredentials(!0)}ft.prototype.parse=function(be,pe){var ze=this,Re=this.json,Se=this.extensions;this.cache.removeAll(),this.markDefs(),Promise.all([this.getDependencies("scene"),this.getDependencies("animation"),this.getDependencies("camera")]).then(function(et){var Oe={scene:et[0][Re.scene||0],scenes:et[0],animations:et[1],cameras:et[2],asset:Re.asset,parser:ze,userData:{}};De(Se,Oe,Re),Le(Oe,Re),be(Oe)}).catch(pe)},ft.prototype.markDefs=function(){for(var be=this.json.nodes||[],pe=this.json.skins||[],ze=this.json.meshes||[],Re={},Se={},et=0,Oe=pe.length;et<Oe;et++)for(var qe=pe[et].joints,tt=0,Ge=qe.length;tt<Ge;tt++)be[qe[tt]].isBone=!0;for(var at=0,mt=be.length;at<mt;at++){var Lt=be[at];Lt.mesh!==void 0&&(Re[Lt.mesh]===void 0&&(Re[Lt.mesh]=Se[Lt.mesh]=0),Re[Lt.mesh]++,Lt.skin!==void 0&&(ze[Lt.mesh].isSkinnedMesh=!0))}this.json.meshReferences=Re,this.json.meshUses=Se},ft.prototype.getDependency=function(be,pe){var ze=be+":"+pe,Re=this.cache.get(ze);if(!Re){switch(be){case"scene":Re=this.loadScene(pe);break;case"node":Re=this.loadNode(pe);break;case"mesh":Re=this.loadMesh(pe);break;case"accessor":Re=this.loadAccessor(pe);break;case"bufferView":Re=this.loadBufferView(pe);break;case"buffer":Re=this.loadBuffer(pe);break;case"material":Re=this.loadMaterial(pe);break;case"texture":Re=this.loadTexture(pe);break;case"skin":Re=this.loadSkin(pe);break;case"animation":Re=this.loadAnimation(pe);break;case"camera":Re=this.loadCamera(pe);break;case"light":Re=this.extensions[n.KHR_LIGHTS_PUNCTUAL].loadLight(pe);break;default:throw new Error("Unknown type: "+be)}this.cache.add(ze,Re)}return Re},ft.prototype.getDependencies=function(be){var pe=this.cache.get(be);if(!pe){var ze=this,Re=this.json[be+(be==="mesh"?"es":"s")]||[];pe=Promise.all(Re.map(function(Se,et){return ze.getDependency(be,et)})),this.cache.add(be,pe)}return pe},ft.prototype.loadBuffer=function(be){var pe=this.json.buffers[be],ze=this.fileLoader;if(pe.type&&pe.type!=="arraybuffer")throw new Error("THREE.GLTFLoader: "+pe.type+" buffer type is not supported.");if(pe.uri===void 0&&be===0)return Promise.resolve(this.extensions[n.KHR_BINARY_GLTF].body);var Re=this.options;return new Promise(function(Se,et){ze.load(Xe(pe.uri,Re.path),Se,void 0,function(){et(new Error('THREE.GLTFLoader: Failed to load buffer "'+pe.uri+'".'))})})},ft.prototype.loadBufferView=function(be){var pe=this.json.bufferViews[be];return this.getDependency("buffer",pe.buffer).then(function(ze){var Re=pe.byteLength||0,Se=pe.byteOffset||0;return ze.slice(Se,Se+Re)})},ft.prototype.loadAccessor=function(be){var pe=this,ze=this.json,Re=this.json.accessors[be];if(Re.bufferView===void 0&&Re.sparse===void 0)return Promise.resolve(null);var Se=[];return Re.bufferView!==void 0?Se.push(this.getDependency("bufferView",Re.bufferView)):Se.push(null),Re.sparse!==void 0&&(Se.push(this.getDependency("bufferView",Re.sparse.indices.bufferView)),Se.push(this.getDependency("bufferView",Re.sparse.values.bufferView))),Promise.all(Se).then(function(et){var Oe=et[0],qe=re[Re.type],tt=G[Re.componentType],Ge=tt.BYTES_PER_ELEMENT,at=Ge*qe,mt=Re.byteOffset||0,Lt=Re.bufferView!==void 0?ze.bufferViews[Re.bufferView].byteStride:void 0,oi=Re.normalized===!0,wi,le;if(Lt&&Lt!==at){var Ee=Math.floor(mt/Lt),Tt="InterleavedBuffer:"+Re.bufferView+":"+Re.componentType+":"+Ee+":"+Re.count,bt=pe.cache.get(Tt);bt||(wi=new tt(Oe,Ee*Lt,Re.count*Lt/Ge),bt=new Ws(wi,Lt/Ge),pe.cache.add(Tt,bt)),le=new ad(bt,qe,mt%Lt/Ge,oi)}else Oe===null?wi=new tt(Re.count*qe):wi=new tt(Oe,mt,Re.count*qe),le=new Fi(wi,qe,oi);if(Re.sparse!==void 0){var Ai=re.SCALAR,gi=G[Re.sparse.indices.componentType],li=Re.sparse.indices.byteOffset||0,xi=Re.sparse.values.byteOffset||0,Si=new gi(et[1],li,Re.sparse.count*Ai),ci=new tt(et[2],xi,Re.sparse.count*qe);Oe!==null&&(le=new Fi(le.array.slice(),le.itemSize,le.normalized));for(var Gt=0,si=Si.length;Gt<si;Gt++){var Yt=Si[Gt];if(le.setX(Yt,ci[Gt*qe]),qe>=2&&le.setY(Yt,ci[Gt*qe+1]),qe>=3&&le.setZ(Yt,ci[Gt*qe+2]),qe>=4&&le.setW(Yt,ci[Gt*qe+3]),qe>=5)throw new Error("THREE.GLTFLoader: Unsupported itemSize in sparse BufferAttribute.")}}return le})},ft.prototype.loadTexture=function(be){var pe=this,ze=this.json,Re=this.options,Se=this.textureLoader,et=window.URL||window.webkitURL,Oe=ze.textures[be],qe=Oe.extensions||{},tt;qe[n.MSFT_TEXTURE_DDS]?tt=ze.images[qe[n.MSFT_TEXTURE_DDS].source]:tt=ze.images[Oe.source];var Ge=tt.uri,at=!1;return tt.bufferView!==void 0&&(Ge=pe.getDependency("bufferView",tt.bufferView).then(function(mt){at=!0;var Lt=new Blob([mt],{type:tt.mimeType});return Ge=et.createObjectURL(Lt),Ge})),Promise.resolve(Ge).then(function(mt){var Lt=Re.manager.getHandler(mt);return Lt||(Lt=qe[n.MSFT_TEXTURE_DDS]?pe.extensions[n.MSFT_TEXTURE_DDS].ddsLoader:Se),new Promise(function(oi,wi){Lt.load(Xe(mt,Re.path),oi,void 0,wi)})}).then(function(mt){at===!0&&et.revokeObjectURL(Ge),mt.flipY=!1,Oe.name!==void 0&&(mt.name=Oe.name),tt.mimeType in Ie&&(mt.format=Ie[tt.mimeType]);var Lt=ze.samplers||{},oi=Lt[Oe.sampler]||{};return mt.magFilter=q[oi.magFilter]||$n,mt.minFilter=q[oi.minFilter]||Sc,mt.wrapS=Z[oi.wrapS]||dl,mt.wrapT=Z[oi.wrapT]||dl,mt})},ft.prototype.assignTexture=function(be,pe,ze){var Re=this;return this.getDependency("texture",ze.index).then(function(Se){if(!Se.isCompressedTexture)switch(pe){case"aoMap":case"emissiveMap":case"metalnessMap":case"normalMap":case"roughnessMap":Se.format=zs;break}if(ze.texCoord!==void 0&&ze.texCoord!=0&&!(pe==="aoMap"&&ze.texCoord==1)&&console.warn("THREE.GLTFLoader: Custom UV set "+ze.texCoord+" for texture "+pe+" not yet supported."),Re.extensions[n.KHR_TEXTURE_TRANSFORM]){var et=ze.extensions!==void 0?ze.extensions[n.KHR_TEXTURE_TRANSFORM]:void 0;et&&(Se=Re.extensions[n.KHR_TEXTURE_TRANSFORM].extendTexture(Se,et))}be[pe]=Se})},ft.prototype.assignFinalMaterial=function(be){var pe=be.geometry,ze=be.material;this.extensions;var Re=pe.attributes.tangent!==void 0,Se=pe.attributes.color!==void 0,et=pe.attributes.normal===void 0,Oe=be.isSkinnedMesh===!0,qe=Object.keys(pe.morphAttributes).length>0,tt=qe&&pe.morphAttributes.normal!==void 0;if(be.isPoints){var Ge="PointsMaterial:"+ze.uuid,at=this.cache.get(Ge);at||(at=new Aa,ki.prototype.copy.call(at,ze),at.color.copy(ze.color),at.map=ze.map,at.sizeAttenuation=!1,this.cache.add(Ge,at)),ze=at}else if(be.isLine){var Ge="LineBasicMaterial:"+ze.uuid,mt=this.cache.get(Ge);mt||(mt=new Vn,ki.prototype.copy.call(mt,ze),mt.color.copy(ze.color),this.cache.add(Ge,mt)),ze=mt}if(Re||Se||et||Oe||qe){var Ge="ClonedMaterial:"+ze.uuid+":";ze.isGLTFSpecularGlossinessMaterial&&(Ge+="specular-glossiness:"),Oe&&(Ge+="skinning:"),Re&&(Ge+="vertex-tangents:"),Se&&(Ge+="vertex-colors:"),et&&(Ge+="flat-shading:"),qe&&(Ge+="morph-targets:"),tt&&(Ge+="morph-normals:");var Lt=this.cache.get(Ge);Lt||(Lt=ze.clone(),Oe&&(Lt.skinning=!0),Re&&(Lt.vertexTangents=!0),Se&&(Lt.vertexColors=Ac),et&&(Lt.flatShading=!0),qe&&(Lt.morphTargets=!0),tt&&(Lt.morphNormals=!0),this.cache.add(Ge,Lt)),ze=Lt}ze.aoMap&&pe.attributes.uv2===void 0&&pe.attributes.uv!==void 0&&pe.setAttribute("uv2",new Fi(pe.attributes.uv.array,2)),ze.normalScale&&!Re&&(ze.normalScale.y=-ze.normalScale.y),be.material=ze},ft.prototype.loadMaterial=function(be){var pe=this,ze=this.json,Re=this.extensions,Se=ze.materials[be],et,Oe={},qe=Se.extensions||{},tt=[];if(qe[n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS]){var Ge=Re[n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS];et=Ge.getMaterialType(),tt.push(Ge.extendParams(Oe,Se,pe))}else if(qe[n.KHR_MATERIALS_UNLIT]){var at=Re[n.KHR_MATERIALS_UNLIT];et=at.getMaterialType(),tt.push(at.extendParams(Oe,Se,pe))}else{et=Xr;var mt=Se.pbrMetallicRoughness||{};if(Oe.color=new ti(1,1,1),Oe.opacity=1,Array.isArray(mt.baseColorFactor)){var Lt=mt.baseColorFactor;Oe.color.fromArray(Lt),Oe.opacity=Lt[3]}mt.baseColorTexture!==void 0&&tt.push(pe.assignTexture(Oe,"map",mt.baseColorTexture)),Oe.metalness=mt.metallicFactor!==void 0?mt.metallicFactor:1,Oe.roughness=mt.roughnessFactor!==void 0?mt.roughnessFactor:1,mt.metallicRoughnessTexture!==void 0&&(tt.push(pe.assignTexture(Oe,"metalnessMap",mt.metallicRoughnessTexture)),tt.push(pe.assignTexture(Oe,"roughnessMap",mt.metallicRoughnessTexture)))}Se.doubleSided===!0&&(Oe.side=Uh);var oi=Se.alphaMode||me.OPAQUE;return oi===me.BLEND?Oe.transparent=!0:(Oe.transparent=!1,oi===me.MASK&&(Oe.alphaTest=Se.alphaCutoff!==void 0?Se.alphaCutoff:.5)),Se.normalTexture!==void 0&&et!==xr&&(tt.push(pe.assignTexture(Oe,"normalMap",Se.normalTexture)),Oe.normalScale=new Pt(1,1),Se.normalTexture.scale!==void 0&&Oe.normalScale.set(Se.normalTexture.scale,Se.normalTexture.scale)),Se.occlusionTexture!==void 0&&et!==xr&&(tt.push(pe.assignTexture(Oe,"aoMap",Se.occlusionTexture)),Se.occlusionTexture.strength!==void 0&&(Oe.aoMapIntensity=Se.occlusionTexture.strength)),Se.emissiveFactor!==void 0&&et!==xr&&(Oe.emissive=new ti().fromArray(Se.emissiveFactor)),Se.emissiveTexture!==void 0&&et!==xr&&tt.push(pe.assignTexture(Oe,"emissiveMap",Se.emissiveTexture)),Promise.all(tt).then(function(){var wi;return et===E?wi=Re[n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS].createMaterial(Oe):wi=new et(Oe),Se.name!==void 0&&(wi.name=Se.name),wi.map&&(wi.map.encoding=qh),wi.emissiveMap&&(wi.emissiveMap.encoding=qh),Le(wi,Se),Se.extensions&&De(Re,wi,Se),wi})};function _t(be,pe,ze){var Re=pe.attributes,Se=new Oo;if(Re.POSITION!==void 0){var et=ze.json.accessors[Re.POSITION],Oe=et.min,qe=et.max;if(Oe!==void 0&&qe!==void 0)Se.set(new ve(Oe[0],Oe[1],Oe[2]),new ve(qe[0],qe[1],qe[2]));else{console.warn("THREE.GLTFLoader: Missing min/max properties for accessor POSITION.");return}}else return;var tt=pe.targets;if(tt!==void 0)for(var Ge=new ve,at=0,mt=tt.length;at<mt;at++){var Lt=tt[at];if(Lt.POSITION!==void 0){var et=ze.json.accessors[Lt.POSITION],Oe=et.min,qe=et.max;Oe!==void 0&&qe!==void 0?(Ge.setX(Math.max(Math.abs(Oe[0]),Math.abs(qe[0]))),Ge.setY(Math.max(Math.abs(Oe[1]),Math.abs(qe[1]))),Ge.setZ(Math.max(Math.abs(Oe[2]),Math.abs(qe[2]))),Se.expandByVector(Ge)):console.warn("THREE.GLTFLoader: Missing min/max properties for accessor POSITION.")}}be.boundingBox=Se;var oi=new Vs;Se.getCenter(oi.center),oi.radius=Se.min.distanceTo(Se.max)/2,be.boundingSphere=oi}function pt(be,pe,ze){var Re=pe.attributes,Se=[];function et(Ge,at){return ze.getDependency("accessor",Ge).then(function(mt){be.setAttribute(at,mt)})}for(var Oe in Re){var qe=ie[Oe]||Oe.toLowerCase();qe in be.attributes||Se.push(et(Re[Oe],qe))}if(pe.indices!==void 0&&!be.index){var tt=ze.getDependency("accessor",pe.indices).then(function(Ge){be.setIndex(Ge)});Se.push(tt)}return Le(be,pe),_t(be,pe,ze),Promise.all(Se).then(function(){return pe.targets!==void 0?He(be,pe.targets,ze):be})}function Nt(be,pe){var ze=be.getIndex();if(ze===null){var Re=[],Se=be.getAttribute("position");if(Se!==void 0){for(var et=0;et<Se.count;et++)Re.push(et);be.setIndex(Re),ze=be.getIndex()}else return console.error("THREE.GLTFLoader.toTrianglesDrawMode(): Undefined position attribute. Processing not possible."),be}var Oe=ze.count-2,qe=[];if(pe===V1)for(var et=1;et<=Oe;et++)qe.push(ze.getX(0)),qe.push(ze.getX(et)),qe.push(ze.getX(et+1));else for(var et=0;et<Oe;et++)et%2===0?(qe.push(ze.getX(et)),qe.push(ze.getX(et+1)),qe.push(ze.getX(et+2))):(qe.push(ze.getX(et+2)),qe.push(ze.getX(et+1)),qe.push(ze.getX(et)));qe.length/3!==Oe&&console.error("THREE.GLTFLoader.toTrianglesDrawMode(): Unable to generate correct amount of triangles.");var tt=be.clone();return tt.setIndex(qe),tt}return ft.prototype.loadGeometries=function(be){var pe=this,ze=this.extensions,Re=this.primitiveCache;function Se(Lt){return ze[n.KHR_DRACO_MESH_COMPRESSION].decodePrimitive(Lt,pe).then(function(oi){return pt(oi,Lt,pe)})}for(var et=[],Oe=0,qe=be.length;Oe<qe;Oe++){var tt=be[Oe],Ge=ot(tt),at=Re[Ge];if(at)et.push(at.promise);else{var mt;tt.extensions&&tt.extensions[n.KHR_DRACO_MESH_COMPRESSION]?mt=Se(tt):mt=pt(new vi,tt,pe),Re[Ge]={primitive:tt,promise:mt},et.push(mt)}}return Promise.all(et)},ft.prototype.loadMesh=function(be){for(var pe=this,ze=this.json,Re=ze.meshes[be],Se=Re.primitives,et=[],Oe=0,qe=Se.length;Oe<qe;Oe++){var tt=Se[Oe].material===void 0?je(this.cache):this.getDependency("material",Se[Oe].material);et.push(tt)}return et.push(pe.loadGeometries(Se)),Promise.all(et).then(function(Ge){for(var at=Ge.slice(0,Ge.length-1),mt=Ge[Ge.length-1],Lt=[],oi=0,wi=mt.length;oi<wi;oi++){var le=mt[oi],Ee=Se[oi],Tt,bt=at[oi];if(Ee.mode===k.TRIANGLES||Ee.mode===k.TRIANGLE_STRIP||Ee.mode===k.TRIANGLE_FAN||Ee.mode===void 0)Tt=Re.isSkinnedMesh===!0?new hd(le,bt):new Bn(le,bt),Tt.isSkinnedMesh===!0&&!Tt.geometry.attributes.skinWeight.normalized&&Tt.normalizeSkinWeights(),Ee.mode===k.TRIANGLE_STRIP?Tt.geometry=Nt(Tt.geometry,hC):Ee.mode===k.TRIANGLE_FAN&&(Tt.geometry=Nt(Tt.geometry,V1));else if(Ee.mode===k.LINES)Tt=new Xn(le,bt);else if(Ee.mode===k.LINE_STRIP)Tt=new mo(le,bt);else if(Ee.mode===k.LINE_LOOP)Tt=new lm(le,bt);else if(Ee.mode===k.POINTS)Tt=new hm(le,bt);else throw new Error("THREE.GLTFLoader: Primitive mode unsupported: "+Ee.mode);Object.keys(Tt.geometry.morphAttributes).length>0&&Ue(Tt,Re),Tt.name=Re.name||"mesh_"+be,mt.length>1&&(Tt.name+="_"+oi),Le(Tt,Re),pe.assignFinalMaterial(Tt),Lt.push(Tt)}if(Lt.length===1)return Lt[0];for(var Ai=new Al,oi=0,wi=Lt.length;oi<wi;oi++)Ai.add(Lt[oi]);return Ai})},ft.prototype.loadCamera=function(be){var pe,ze=this.json.cameras[be],Re=ze[ze.type];if(!Re){console.warn("THREE.GLTFLoader: Missing camera parameters.");return}return ze.type==="perspective"?pe=new tr(Yi.radToDeg(Re.yfov),Re.aspectRatio||1,Re.znear||1,Re.zfar||2e6):ze.type==="orthographic"&&(pe=new bu(Re.xmag/-2,Re.xmag/2,Re.ymag/2,Re.ymag/-2,Re.znear,Re.zfar)),ze.name!==void 0&&(pe.name=ze.name),Le(pe,ze),Promise.resolve(pe)},ft.prototype.loadSkin=function(be){var pe=this.json.skins[be],ze={joints:pe.joints};return pe.inverseBindMatrices===void 0?Promise.resolve(ze):this.getDependency("accessor",pe.inverseBindMatrices).then(function(Re){return ze.inverseBindMatrices=Re,ze})},ft.prototype.loadAnimation=function(be){for(var pe=this.json,ze=pe.animations[be],Re=[],Se=[],et=[],Oe=[],qe=[],tt=0,Ge=ze.channels.length;tt<Ge;tt++){var at=ze.channels[tt],mt=ze.samplers[at.sampler],Lt=at.target,oi=Lt.node!==void 0?Lt.node:Lt.id,wi=ze.parameters!==void 0?ze.parameters[mt.input]:mt.input,le=ze.parameters!==void 0?ze.parameters[mt.output]:mt.output;Re.push(this.getDependency("node",oi)),Se.push(this.getDependency("accessor",wi)),et.push(this.getDependency("accessor",le)),Oe.push(mt),qe.push(Lt)}return Promise.all([Promise.all(Re),Promise.all(Se),Promise.all(et),Promise.all(Oe),Promise.all(qe)]).then(function(Ee){for(var Tt=Ee[0],bt=Ee[1],Ai=Ee[2],gi=Ee[3],li=Ee[4],xi=[],Si=0,ci=Tt.length;Si<ci;Si++){var Gt=Tt[Si],si=bt[Si],Yt=Ai[Si],Ne=gi[Si],Vt=li[Si];if(Gt!==void 0){Gt.updateMatrix(),Gt.matrixAutoUpdate=!0;var $t;switch(ae[Vt.path]){case ae.weights:$t=vu;break;case ae.rotation:$t=Pd;break;case ae.position:case ae.scale:default:$t=_u;break}var Li=Gt.name?Gt.name:Gt.uuid,di=Ne.interpolation!==void 0?Ae[Ne.interpolation]:Ec,Oi=[];ae[Vt.path]===ae.weights?Gt.traverse(function(Mn){Mn.isMesh===!0&&Mn.morphTargetInfluences&&Oi.push(Mn.name?Mn.name:Mn.uuid)}):Oi.push(Li);var qi=Yt.array;if(Yt.normalized){var Zi;if(qi.constructor===Int8Array)Zi=1/127;else if(qi.constructor===Uint8Array)Zi=1/255;else if(qi.constructor==Int16Array)Zi=1/32767;else if(qi.constructor===Uint16Array)Zi=1/65535;else throw new Error("THREE.GLTFLoader: Unsupported output accessor component type.");for(var Jn=new Float32Array(qi.length),Gi=0,zn=qi.length;Gi<zn;Gi++)Jn[Gi]=qi[Gi]*Zi;qi=Jn}for(var Gi=0,zn=Oi.length;Gi<zn;Gi++){var on=new $t(Oi[Gi]+"."+ae[Vt.path],si.array,qi,di);Ne.interpolation==="CUBICSPLINE"&&(on.createInterpolant=function(Jr){return new z(this.times,this.values,this.getValueSize()/3,Jr)},on.createInterpolant.isInterpolantFactoryMethodGLTFCubicSpline=!0),xi.push(on)}}}var or=ze.name!==void 0?ze.name:"animation_"+be;return new Po(or,void 0,xi)})},ft.prototype.loadNode=function(be){var pe=this.json,ze=this.extensions,Re=this,Se=pe.meshReferences,et=pe.meshUses,Oe=pe.nodes[be];return function(){var qe=[];return Oe.mesh!==void 0&&qe.push(Re.getDependency("mesh",Oe.mesh).then(function(tt){var Ge;if(Se[Oe.mesh]>1){var at=et[Oe.mesh]++;Ge=tt.clone(),Ge.name+="_instance_"+at}else Ge=tt;return Oe.weights!==void 0&&Ge.traverse(function(mt){if(mt.isMesh)for(var Lt=0,oi=Oe.weights.length;Lt<oi;Lt++)mt.morphTargetInfluences[Lt]=Oe.weights[Lt]}),Ge})),Oe.camera!==void 0&&qe.push(Re.getDependency("camera",Oe.camera)),Oe.extensions&&Oe.extensions[n.KHR_LIGHTS_PUNCTUAL]&&Oe.extensions[n.KHR_LIGHTS_PUNCTUAL].light!==void 0&&qe.push(Re.getDependency("light",Oe.extensions[n.KHR_LIGHTS_PUNCTUAL].light)),Promise.all(qe)}().then(function(qe){var tt;if(Oe.isBone===!0?tt=new Vv:qe.length>1?tt=new Al:qe.length===1?tt=qe[0]:tt=new ni,tt!==qe[0])for(var Ge=0,at=qe.length;Ge<at;Ge++)tt.add(qe[Ge]);if(Oe.name!==void 0&&(tt.userData.name=Oe.name,tt.name=Ar.sanitizeNodeName(Oe.name)),Le(tt,Oe),Oe.extensions&&De(ze,tt,Oe),Oe.matrix!==void 0){var mt=new Xi;mt.fromArray(Oe.matrix),tt.applyMatrix4(mt)}else Oe.translation!==void 0&&tt.position.fromArray(Oe.translation),Oe.rotation!==void 0&&tt.quaternion.fromArray(Oe.rotation),Oe.scale!==void 0&&tt.scale.fromArray(Oe.scale);return tt})},ft.prototype.loadScene=function(){function be(pe,ze,Re,Se){var et=Re.nodes[pe];return Se.getDependency("node",pe).then(function(Oe){if(et.skin===void 0)return Oe;var qe;return Se.getDependency("skin",et.skin).then(function(tt){qe=tt;for(var Ge=[],at=0,mt=qe.joints.length;at<mt;at++)Ge.push(Se.getDependency("node",qe.joints[at]));return Promise.all(Ge)}).then(function(tt){return Oe.traverse(function(Ge){if(Ge.isMesh){for(var at=[],mt=[],Lt=0,oi=tt.length;Lt<oi;Lt++){var wi=tt[Lt];if(wi){at.push(wi);var le=new Xi;qe.inverseBindMatrices!==void 0&&le.fromArray(qe.inverseBindMatrices.array,Lt*16),mt.push(le)}else console.warn('THREE.GLTFLoader: Joint "%s" could not be found.',qe.joints[Lt])}Ge.bind(new nm(at,mt),Ge.matrixWorld)}}),Oe})}).then(function(Oe){ze.add(Oe);var qe=[];if(et.children)for(var tt=et.children,Ge=0,at=tt.length;Ge<at;Ge++){var mt=tt[Ge];qe.push(be(mt,Oe,Re,Se))}return Promise.all(qe)})}return function(ze){var Re=this.json,Se=this.extensions,et=this.json.scenes[ze],Oe=this,qe=new Us;et.name!==void 0&&(qe.name=et.name),Le(qe,et),et.extensions&&De(Se,qe,et);for(var tt=et.nodes||[],Ge=[],at=0,mt=tt.length;at<mt;at++)Ge.push(be(tt[at],qe,Re,Oe));return Promise.all(Ge).then(function(){return qe})}}(),e}();function M4(e){new A4().load("./gis/34M_17.gltf",n=>{n.scene.position.set(116577.28779765591,19632.646909285337,0),n.scene.rotateX(Math.PI/2),n.scene.scale.set(2,2,2),e.addObject(n.scene)})}let Ia;class S4 extends D.MxCADPluginBase{constructor(){super(),Ia&&Ia.isMxCADAppLib()||(this.map_default_data=J3())}}Ah(),MxPluginContext.on("databaseLayerUpdate",()=>{console.log("数据库图层数据更新")}),_i.MxFun.setloadImageFuction((e,t,n)=>e.slice(-4)=="tiff"||e.slice(-3)=="tif"?(new D.MxTIFFLoader().load(e,t,n),1):0),_i.MxFun.onInitSync(()=>new Promise(e=>{e(!0)})),_i.MxFun.on("mxcadApplicationStart",e=>{Ia=e,Ia.init(new S4)}),_i.MxFun.on("mxcadApplicationInitMap",()=>{Q3(Ia.mxmap)}),_i.MxFun.on("mxcadApplicationStartCreatingMxCADObject",e=>{let t=e.mxdraw;t.setViewMovementMethod(!0),t.on("openFileComplete",()=>{console.log("MxTip:openFileComplete ")}),t.addControlsEvent("mousedown",n=>{let l=n.offsetX,c=n.offsetY,d=t.viewCoord2Cad(l,c,0);return console.log("mousedown:",d),0})});const T4=e=>{let t,n;D.MxCpp.getCurrentMxCAD().on("selectChange",l=>{var d;if(l.length===0)return;const c=(d=l[0])==null?void 0:d.getMcDbEntity();if(c&&c instanceof D.McDbCustomEntity&&(t==null?void 0:t.getHandle())===c.getHandle()){const f=c.getTypeName();Fo.value=c.clone(),f==="McDbTestRoughness"?(ko.value="RoughnessDialog",co.showDialog(!0,{title:rt("表面粗糙度")}).then(x=>Ei(this,[x],function*({data:r,isCanceled:_}){var w;if(!_){const b=r.roughnessData,E=c.clone();E.rougMarkType=b.selectSymbolNum,E.textLeftStr=b.textLeftStr,E.rougCornerType=b.rougCornerType==="无"?"":b.rougCornerType,E.isRoungSameRequire=b.isRoungSameRequire,E.isShowMostSymbols=b.isShowMostSymbols;const P=(w=b.textUpStr)==null?void 0:w.filter(I=>I!="");E.textUpStr=JSON.parse(JSON.stringify(P)).reverse(),E.textDownStr=b.textDownStr.filter(I=>I!=""),E.isAddRougLongLine=b.isAddLongLine,c.erase(),e.drawEntity(E),e.mxdraw.clearMxCurrentSelect(),e.updateDisplay()}}))):f==="McDbTestWeldingSymbol"?(ko.value="WeldingSymbolDialog",co.showDialog(!0,{title:rt("焊接符号")}).then(x=>Ei(this,[x],function*({data:r,isCanceled:_}){if(!_){const w=r.formData,b=c;if(w.specialSymbol.length&&b.setSpecialSymbol(w.specialSymbol),w.rightDim1||w.rightDim2){const E=[nn.top,nn.down],P=[];E.forEach(I=>{const z=w.rightDim1.filter(q=>q.position===I)[0],k=w.rightDim2.filter(q=>q.position===I)[0],G=z.content&&k.content?"×":"";P.push({position:I,content:z.content+G+k.content})}),b.setRightDim(P)}b.setSuppleSymbol(w.suppleSymbol),b.setLeftDim(w.leftDim),b.setTopDim(w.topDim),b.setAuxiliarySymbol(w.auxiliarySymbol),b.setBaseSymbok(w.basicSymbol),b.setIntWeldSeam(w.intWeldSeam),b.dottedLinePos=w.dottedLinePos,b.weldingSymbolInfo=w.weldingSymbolInfo.replace(/\n/g,"\\P"),c.erase(),e.drawEntity(b),e.mxdraw.clearMxCurrentSelect(),e.updateDisplay()}}))):f==="MxDbGeometricTolerances"&&(ko.value="GemoetricToleranceDialog",co.showDialog(!0,{title:rt("形位公差")}).then(x=>Ei(this,[x],function*({data:r,isCanceled:_}){if(!_){const w=r.formData,b=c;b.dimToleranceContents=(w==null?void 0:w.dimToleranceContents)||[],b.isShowFullWeekSymbol=(w==null?void 0:w.isShowFull)||!1,b.dimNotesDown=(w==null?void 0:w.downDim)||"",b.dimNotesUp=(w==null?void 0:w.topDim)||"",c.erase(),e.drawEntity(b),e.mxdraw.clearMxCurrentSelect(),e.updateDisplay()}})))}t=c,n&&clearTimeout(n),n=setTimeout(()=>{t=null},300)})};_i.MxFun.on("mxcadApplicationCreatedMxCADObject",e=>{if(U4(),T4(e.mxcad),Ia.isMxCADAppLib())return;let t=Ia.getServerConfig();D.MxCpp.App.addNetworkLoadingFont(t.font||["txt.shx","simplex.shx","gdt.shx","aaa.shx","ltypeshp.shx","complex.shx"]),D.MxCpp.App.addNetworkLoadingBigFont(t.bigFont||["hztxt.shx","gbcbig.shx"]),t.trueTypeFont?D.MxCpp.App.addNetworkLoadingTrueTypeFont(t.trueTypeFont[0],t.trueTypeFont[1],t.trueTypeFont[2]):D.MxCpp.App.addNetworkLoadingTrueTypeFont(["syadobe"],["思原黑体"],["syadobe.otf"]);let n=e.mxcad;n.setAttribute({DisplayPrecision:35}),n.on("selectChange",l=>{if(console.log("selectChange"),l.length==0)return;let c=l[0],d=c.getMxDbEntity();if(d!==null){console.log(d.getTypeName()),d instanceof _i.MxDbRectBoxLeadComment&&console.log(d.text);return}let f=c.getMcDbEntity();f!==null&&(console.log(f.objectName),f instanceof D.McDbText?console.log(f.textString):f instanceof D.McDbBlockReference&&f.getAllAttribute().forEach(x=>{let w=x.getMcDbEntity();console.log(w.textString),console.log(w.tag)}))}),MxPluginContext.setCustomDataListLength(6),D.MxCpp.PropertiesWindow.onEvent_getProperties(l=>{let c=l.getMcDbEntity();if(!c)return[];let d=c.getxDataDouble("DN"),f=c.getxDataDouble("LEN"),r=[];return d.ret&&(r.push({sVarName:"DN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:d.val,isOnlyRead:!1}),r.push({sVarName:"DN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:d.val,isOnlyRead:!1}),r.push({sVarName:"DN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:d.val,isOnlyRead:!1})),f.ret&&(r.push({sVarName:"LEN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:f.val,isOnlyRead:!1}),r.push({sVarName:"LEN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:f.val,isOnlyRead:!1}),r.push({sVarName:"LEN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:f.val,isOnlyRead:!1})),r}),D.MxCpp.PropertiesWindow.onEvent_setProperties((l,c)=>{let d=l.getMcDbEntity();d&&(c.sVarName=="DN"?d.setxDataDouble("DN",c.val):c.sVarName=="LEN"&&d.setxDataDouble("LEN",c.val))})});function E4(){window.open("https://demo.mxdraw3d.com:3562/MxCADCode.7z")}function P4(){window.open("https://demo.mxdraw3d.com:3562/MxDrawCloudServer1.0TryVersion.7z")}function Su(e){var t=window.location.href;return t.indexOf("?")!=-1&&(t=t.replace(/(\?|#)[^'"]*/,"")),`${t}?map=true&maptype=${e}`}function C4(){window.open(Su("gdslwzj"))}function R4(){window.open(Su("google"))}function D4(){window.open(Su("gdyx"))}function L4(){window.open(Su("tdtsl"))}function I4(){window.open(Su("bdsl"))}function B4(){window.open(Su("geoq"))}function z4(){return Ei(this,null,function*(){})}function k4(){return Ei(this,null,function*(){const e=new D.MxCADUiPrPoint;e.setMessage(rt(" 指定一点:"));let t=yield e.go();if(!t)return;const n=new D.MxCADUiPrAngle;n.setMessage(rt("指定夹角")),n.setKeyWords(""),n.setBasePt(t);const l=yield n.go();console.log(l)})}function F4(){return Ei(this,null,function*(){let e=new D.MxCADUiPrEntity;e.setMessage("选择要需要开启自定义属性的对象");let t=yield e.go();if(!t.isValid())return;let n=t.getMcDbEntity();D.MxCpp.PropertiesWindow.setEntitySupportCustom(t),n.setxDataDouble("DN",100),n.setxDataDouble("LEN",2e3)})}function U4(){_i.MxFun.addCommand("Mx_Open_DemoCode",E4),_i.MxFun.addCommand("Mx_Open_DevInstall",P4),_i.MxFun.addCommand("Mx_Open_Map_gdslwzj",C4),_i.MxFun.addCommand("Mx_Open_Map_gdyx",D4),_i.MxFun.addCommand("Mx_Open_Map_tdtsl",L4),_i.MxFun.addCommand("Mx_Open_Map_bdsl",I4),_i.MxFun.addCommand("Mx_Open_Map_geoq",B4),_i.MxFun.addCommand("Mx_Open_Map_googlecn",R4),_i.MxFun.addCommand("Mx_Test_GetFile",z4),_i.MxFun.addCommand("MxTest_Map_Download",$3),_i.MxFun.addCommand("MxTemp_Test",k4),_i.MxFun.addCommand("Mx_TestExProp",F4),O3(),LM(),FM(),Ia.mxmap&&M4(_i.MxFun.getCurrentDraw())}const N4=Object.freeze(Object.defineProperty({__proto__:null,default:{718:"Specify the first point of the output range:",719:"Specify the second point of the output range:",720:"Specify the first point:",721:"Specify the second point:",722:"Cloud wireframe starting point:",723:"End point of cloud wireframe:",724:"Drawing review annotation points:",725:"Click to start drawing cloud lines:",726:"Click to end drawing cloud lines again:",727:"Specify one point:",728:"Specify two points:",729:"Select object",730:"Specify the next point:",731:"\\Specify insertion base point",732:"Specify table insertion point:",733:"Specify insertion point:",734:"Specify insertion base point",735:"Select annotation object",736:"Please select the target text",737:"Specify a point inside the filling area:",738:"No closed area found",739:"Surface roughness",740:"Welding symbol",741:"Positional tolerance",742:"Select the object that needs to enable custom properties",743:"Select the object to hide",744:"Specify insertion point:",745:"Specify one point:",746:"Specify the angle",747:"Specify two points:",748:"Select pattern fill object",749:"Specify the first point:",750:"Specify the second point:",751:"Specify the second angle point:",752:"Specify the last point:",753:"Specify coordinate point:",754:"Specify annotation points:",755:"Please provide your approval comments",756:"Specify the starting point of the cloud wireframe",757:"Specify the termination point of the cloud wireframe",758:"Designated review icon annotation points",759:"Specify the first corner point:",760:"Specify the second corner point:",761:"Specify serial number location:",762:"Rotations Symbols",763:"Tag type",764:"Please select the circle to be marked:",765:"Please set positioning points, lines, arcs, or circles",766:"Drag to determine the annotation position",767:"Please specify or enter an angle",768:"weld symbol",769:"Please pick a positioning point, line, or arc",770:"Please specify the second point",771:"Please set the positioning point",772:"Please set the angle",773:"Please set positioning points, lines, or arcs",774:"Please set the lead turning point",775:"Drag to determine the positioning point",776:"Please specify the first point:",777:"Please specify the second point:",778:"Please select the target block object",779:"Please enter a new block name",780:"Select the block that needs to modify the base point",781:"Set base point",782:"Select the block that requires color modification",783:"Enter color index (0~256)",784:"Please select the source block",785:"Select the target block to brush:",786:"Select connection method",787:"Manually connect each line one by one",788:"Automatic batch connection",789:"Please select the block for the connection",790:"Set centerline length",791:"Select the target block to rotate:",792:"Set rotation angle",793:"Please set the zoom ratio",794:"Please set the selection range:",795:"Please select the target block",796:"Please set the statistical scope",797:"Specify table insertion point:",798:"Select target curve",799:"Specify the length annotation point",800:"Select Target Object",801:"Please select the target slope object",802:"Please set the height of the annotation text",803:"Specify slope annotation point",804:"Please select the target coordinate point",805:"Please specify the annotation location",806:"Specify start point",807:"Specify the endpoint",808:"Specify annotation direction",809:"Please set the text content",810:"Please select the first point of the area",811:"Please select the next point",812:"Please select the location for area annotation",813:"Please select corner 1 of the rectangle",814:"Please select corner 2 of the rectangle",815:"Please set the location for area annotation",816:"Please select a measurement point",817:"Please select a straight line",818:"Please set the position of the dimension line",819:"Please select an arc",820:"Please specify the position of the dimension line",821:"Please select a circular object",822:"Please specify the text location",823:"Please select the endpoint or arc of the line",824:"Please specify the position of the text",825:"Please select a continuous measurement label",826:"Please select the second straight line",827:"Please set the position for angle annotation",828:"Please enter the number of star shaped vertices:",829:"Specify the star center point:",830:"Please set the inner radius of the star shape:",831:"Specify the outer radius of the star shape:",832:"Please enter the width of the concave convex line<5>",833:"Please enter the height of the concave convex line as<10>",834:"Please click to confirm the starting point",835:"Please click to confirm the endpoint",836:"Please enter zigzag width<5>",837:"Please enter zigzag line height<10>",838:"Please enter rectangle width<5>",839:"Please enter rectangle height<10>",840:"Please click to confirm the center of the rectangle",841:"Please enter pipe diameter<10>",842:"Please enter the length of the outlet pipe<5>",843:"Please click to confirm the starting point",844:"Specify the starting point of the pipeline section",845:"Specify the endpoint of the sectional pipeline",846:"Select the direction of the pipeline arc",847:"the left",848:"the right side",849:"MODE",850:"straight bead",851:"Arc weld seam",852:"Please enter weld radius<5>",853:"Specify the second point of the arc",854:"Specify end point of arc",855:"Please enter width<25>",856:"Please enter height<15>",857:"Please enter staircase level<10>",858:"Please confirm the center position of the circle",859:"Please enter the radius of the circle",860:"Please enter insulation cotton width<5>",861:"Please enter insulation cotton height<10>",862:"Please click on the next point",863:"Please select the first line",864:"Please select the second line",865:"Please select the endpoint",866:"Please select the target rectangle",867:"Set the center point of the compass",868:"Set the radius of the compass",869:"Select prompt box pointing",870:"Specify the first point of the message box:",871:"Specify the second point of the message box:",872:"Set the message box to point to:",873:"Please set the reference character text",874:"Please set the text height",875:"Please set the benchmark position",876:"Please set positioning points, arcs, or lines",877:"Please set the symbol position",878:"Please set the center of the circle",879:"Please set the center of the gear circle",880:"Please set the gear radius",881:"Please set the centerline length to 10>",882:"Please select the first circle",883:"Please select the second circle",884:"Please set the top left corner point of the rectangle",885:"Please set the bottom right corner point of the rectangle",886:"Please set the fillet radius",887:"Please select the starting point of the polygon",888:"Please select polygon vertices",889:"Select object:",890:"Specify base point",891:"Specify the second point",892:"array",893:"exit",894:"give up",895:"Enter the number of items to be arranged in the array",896:"Select arc object",897:"Choose to copy rotated objects:",898:"Please specify the target point",899:"Please specify the rotation angle",900:"Select the object to be converted into a polygon",901:"Set the number of polygon edges",902:"Input Options",903:"Internally connected to a circle",904:"Externally cut to a circle",905:"Select the object whose color you want to modify",906:"Enter color index",907:"hide",908:"Hide Unselected",909:"show all",910:"Select the target object",911:"Specify to delete the first point of the box:",912:"Specify to delete the second point of the box:",913:"Select the entity that needs to be precisely deleted",914:"Please select an angle to copy the object",915:"Please enter the angle for copying quantity",916:"Please enter the base point for copying the angle",917:"Please enter the copying angle",918:"Please select vertex object",919:"Please select the copied object",920:"Please confirm the replication base point",921:"Please select the reference curve",922:"Select interrupt object",923:"Specify offset object",924:"Please enter the offset distance",925:"Specify the scaling object (select lines, polylines, arcs)",926:"Stretching to",927:"Select the object to modify the line type scale",928:"Please enter the line type ratio",929:"Please enter the array spacing",930:"Please select an arc",931:"Select sorting objects",932:"Specify the arrangement base point",933:"Select target polyline:",934:"Please enter rounded corner radius<5>",935:"Select fill object",936:"Please enter the fill ratio",937:"Please select the original fill shape",938:"Please click to fill any point inside the graphic",939:"Please select a line object",940:"Select equal division mode",941:"measure",942:"Divide",943:"Offset equal division",944:"Copy equally",945:"Please select offset equal division objects",946:"Please select to copy equally divided objects",947:"Please select the line segments that need to be divided equally",948:"Please set equal distances",949:"Please set the number of equal parts",950:"Please set the offset distance",951:"Please specify the offset point",952:"Please specify the replication base point",953:"Please specify the number of equal parts to be copied",954:"Please specify the endpoints for copying and dividing equally",955:"Please select the entity that requires rectangular scaling:",956:"Please specify corner 1 of the rectangle",957:"Please specify corner 2 of the rectangle",958:"Please choose to zoom in on the center point",959:"Please select the zoom in range",960:"Please set the magnification factor",961:"Please choose to enlarge the insertion point",962:"Please select a curve that needs to be broken",963:"Please select a break point on the curve",964:"Please enter the number of arrays",965:"Do you want to enable rotation",966:"correct",967:"deny",968:"Please select the graphics that require an array:",969:"Please select the center point of the array",970:"Please select a closed polygon!",971:"Please select the first point",972:"Please select the second point",973:"Please select the first closed polygon",974:"Please select the second closed polygon",975:"Please select two closed polygons",976:"Two polygons do not have overlapping edges!",977:"Please select the target polygon",978:"Please select the edges of the polygon to add vertices to",979:"Please set the position of the added vertices",980:"Please select the vertices of the polygon that need to be deleted",981:"Please select the edges of the polygon that need to be stretched",982:"Please specify the stretching position",983:"Please set the orientation of the frame to<N>",984:"horizontal",985:"longitudinal",986:"Please set the frame size to<4>",987:"Please set the position of the frame",988:"Specify cutting corner 1",989:"Specify cutting corner point 2",990:"Please set the starting point of the road",991:"Please set the next point",992:"Please select the target alignment line object (choose a line)",993:"Please select the target text object",994:"Select Text Object",995:"Please set the font height",996:"Please set the word width",997:"Please select the source text",998:"Please select the first text",999:"Please select the second text",1e3:"Please select the text that needs to be aligned",1001:"Please choose the alignment method",1002:"the left side",1003:"centre",1004:"the right side",1005:"Please select the alignment base point",1006:"Please select the text that needs to be reversed",1007:"Please select the text that needs to be filled with spaces",1008:"Please select a text object",1009:"Please enter underline width",1010:"Please set the underline distance",1011:"Please set an underline to extend the distance",1012:"Please select the operation option",1013:"capital letters",1014:"lowercase",1015:"sentence case ",1016:"Please select a numerical object",1017:"Please select a text insertion point",1018:"Select the scope to search for:",1019:"Please select the search mode",1020:"equal to",1021:"contain",1022:"The prefix is",1023:"The suffix is",1024:"Please enter keywords",1025:"Select the scope of operation:",1026:"Select operation mode",1027:"add",1028:"delete",1029:"Select operation location",1030:"prefix",1031:"suffix",1032:"Please enter the content",1033:"Please select text",1034:"Please select an arc",1035:"Please choose a text style",1036:"Please set the text extraction range",1037:"Download and open the demo code",1038:"Download development kit",1039:"Call the command to draw circular lines",1040:"Interactive drawing of straight lines",1041:"Add Layer",1042:"Get all layers",1043:"Get all text styles",1044:"Obtain all image blocks",1045:"Get all line types",1046:"Write extended data",1047:"Read extended data",1048:"Test inserting a block",1049:"Draw a straight line",1050:"arc ",1051:"circle",1052:"Draw PL line",1053:"Draw Fill",1054:"emoji",1055:"Draw an ellipse",1056:"Draw elliptical arcs",1057:"Draw multiline text",1058:"TABLE",1059:"Draw QR code",1060:"Insert stamp",1061:"Get all objects",1062:"Interactive selection of objects",1063:"Save MXWeb to the server",1064:"Obtain system variables",1065:"new sheet",1066:"White background color",1067:"Text search and positioning",1068:"Select entity to make blocks",1069:"Draw single line text",1070:"Select point filling",1071:"Set extended attributes",1072:"Draw alignment annotations",1073:"Drawing line annotation",1074:"angular",1075:"Modify object line type",1076:"Select hidden object layer",1077:"Add to current selection",1078:"Visual rotation",1079:"Write extension records",1080:"Get a Naming Dictionary",1081:"Add Text Style",1082:"Draw custom entities",1083:"Modify object color",1084:"The modified object is not visible",1085:"Modify object layer",1086:"Modify the display order of objects",1087:"Output PDF within the specified range",1088:"Draw an image",1089:"Read object extension dictionary",1090:"Draw 3D Polyline",1091:"Custom entity for line drawing text",1092:"Calculate intersection point",1093:"Modify Text Style",1094:"Offset input line drawing",1095:"Create Group",1096:"Screenshot JPG",1097:"Obtain the same text as the drawing",1098:"Specify the output range as dwg",1099:"Test drawing marker circle",1100:"Test Wipeout",1101:"create cutouts",1102:"Tolerance marking",1103:"Change all object colors",1104:"Cutting MXWeb",1105:"Set the current color line weight",1106:"Search for objects within a polygonal region",1107:"Smash objects",1108:"Draw semi transparent lines",1109:"Add line type",1110:"Modify the proportion of the pattern",1111:"Test Text Editing",1112:"Draw barcode",1113:"Screenshot BMP",1114:"Modify Tools",1115:"text tool",1116:"Drawing tools",1117:"Block Tool",1118:"Instrument",1119:"Annotation tool",1120:"Other tools",1121:"Multiple replication",1122:"Arc to Circle",1123:"Copy Rotation",1124:"Circular to Multilateral",1125:"Change color",1126:"Arc angle cutting",1127:"Temporary Hide",1128:"Box deletion",1129:"Angle copying",1130:"Vertex Copy",1131:"Intersection point interruption",1132:"double offset",1133:"Change the size of the circle",1134:"Linetype Scale",1135:"Telescoping",1136:"By arc array",1137:"PL rounded corner",1138:"PL line reverse",1139:"Obtain all linear objects",1140:"equal division",1141:"Rectangular scaling",1142:"interrupt",1143:"Cutting polygons",1144:"Merging Polygons",1145:"Add polygon vertices",1146:"Delete polygon vertices",1147:"Unilateral stretching of polygons",1148:"star shape",1149:"Concave convex line",1150:"jagged lines",1151:"Center rectangle",1152:"rounded rectangle",1153:"Circular centerline",1154:"pipe",1155:"Pipe cutting symbol",1156:"perpendicular bisector",1157:"staircase",1158:"solid circle",1159:"Thermal insulation cotton",1160:"Centerline",1161:"Opening a hole",1162:"message box",1163:"Reference symbol (1)",1164:"weld line",1165:"concentric circles",1166:"gear",1167:"Block centerline",1168:"Circular tangent line",1169:"Reference symbol (2)",1170:"Insert frame",1171:"Draw roads",1172:"Draw any polygon",1173:"Align by line",1174:"Change the font height",1175:"Change the width of the characters",1176:"Brush content",1177:"Change content",1178:"justified",1179:"Align up and down",1180:"Text reversal",1181:"Text framing",1182:"underline",1183:"Title line",1184:"case",1185:"Sum of numbers",1186:"Select specific characters",1187:"affix",1188:"Connecting Text",1189:"Delete space",1190:"Vertical Text",1191:"Align by arc",1192:"Modify global text style",1193:"Extract Text",1194:"Text number",1195:"Change the block name",1196:"Brush block",1197:"Block Connection",1198:"Change the base point of the block",1199:"Change the color of the block",1200:"Multi block rotation",1201:"Multi block scaling",1202:"Brush block angle",1203:"Select by block",1204:"Select all by block",1205:"Statistics of individual blocks",1206:"Count multiple blocks",1207:"Modify block layer",1208:"length",1209:"Statistical area",1210:"Intelligent elevation",1211:"area",1212:"Rectangular area",1213:"distance from point to line",1214:"arc length",1215:"Measuring Circle",1216:"CONTINUE",1217:"View segment length",1218:"Area including arc",1219:"Drawing review annotation",1220:"Rectangular annotation",1221:"Roughness annotation",1222:"Coordinate annotation",1223:"Slope marking",1224:"alignment",1225:"enlarge",1226:"Number annotation",1227:"Rotate annotation",1228:"Circular hole marking",1229:"Directional symbol",1230:"Radiographic annotation",1231:"Rectangular annotation hovering color change",1232:"Crop drawing extension",1233:"Arrow line",1234:"Selected Text",1235:"Clipboard",1236:"cancel",1237:"sure",1238:"Tolerance code",1239:"Tolerance 1",1240:"Tolerance 2",1241:"annotations",1242:"top",1243:"bottom",1244:"reference",1245:"Full week symbol",1246:"Current line",1247:"Add Row",1248:"delete row",1249:"zero clearing",1250:"Straightness",1251:"Flatness",1252:"roundness",1253:"Cylindricity",1254:"Line Profile",1255:"Profile of a Surface",1256:"parallelism",1257:"verticality",1258:"tilt",1259:"Positional accuracy",1260:"Coaxiality",1261:"Symmetry",1262:"runout",1263:"total runout",1264:"clean up",1265:"Please enter the text content and number:",1266:"Text content:",1267:"(Enter 0-20 words)",1268:"Starting number:",1269:"(Number automatically increases by 1)",1270:"Number location:",1271:"Number before",1272:"Number after",1273:"change direction",1274:"Left text content:",1275:"Text content on the right:",1276:"Bottom text content:",1277:"Basic symbols",1278:"Same requirements",1279:"Most symbols",1280:"Add a horizontal line to the long side",1281:"auxiliary symbol",1282:"Supplementary symbols",1283:"Symbol position",1284:"Special symbols",1285:"Left size",1286:"Up size",1287:"Right size",1288:"Staggered weld",1289:"spacing",1290:"extended text ",1291:"Dashed line position",1292:"Welding instructions",1293:"Clear rows",1294:"flange weld",1295:"Type I weld seam",1296:"V-shaped weld seam",1297:"Unilateral V-shaped weld seam",1298:"Single sided steep side V-shaped groove welding",1299:"Tilted weld seam",1300:"Removable pad",1301:"Durable pad",1302:"V-type weld with rounded edge",1303:"U-shaped weld with rounded edge",1304:"Single sided V-shaped weld with a stop edge",1305:"Single sided U-shaped weld with a stop edge",1306:"Edge weld",1307:"Welding joint",1308:"sealing bead",1309:"fillet weld",1310:"Plug weld or groove weld",1311:"spotweld",1312:"Folding interface",1313:"Tilt interface",1314:"Spot weld seam (offset center)",1315:"Weld seam",1316:"Weld seam (off center)",1317:"Steep side V-shaped groove welding",1318:"The first type of planar symbol",1319:"The second concave symbol",1320:"The second type of convex symbol",1321:"The second type of planar symbol",1322:"The first convex symbol",1323:"The third type of planar symbol",1324:"The first concave symbol",1325:"Flatten the weld seam",1326:"Smooth transition at the toe",1327:"With pad symbol",1328:"Three sided weld symbol",1329:"Surrounding welding symbols",1330:"On site symbols",1331:"tail symbol",1332:"Interleaved intermittent welding symbol",1333:"Horn shaped weld seam",1334:"Unilateral horn shaped weld seam",1335:"Weld seam",1336:"Lock edge weld seam",1337:"Locking edge groove",1338:"upper",1339:"below",1340:"not have",1341:"basicSymbol",1342:"auxiliarySymbol",1343:"suppleSymbol",1344:"specialSymbol",1345:"Select the weld symbol to be placed on the geometric shape",1346:"Welding angle width:",1347:"Unilateral V-shaped butt weld (front view)",1348:"Corner weld seam (front view)",1349:"Unilateral V-shaped butt weld (side view)",1350:"Corner weld seam (side view)",1985:"Extract Table",1996:"Please input the table to extract accuracy",1997:"Select the first corner of the extraction range",1998:"Select the second corner of the extraction range",1999:"No valid table recognized!",2e3:"Please test in the local environment!",2001:"Online editing of tables",2019:"Enter the number text",2020:"Please select a single line of text",2021:"Please select a multi line text",2022:"Please set the text insertion point",2023:"Please select single line text",2024:"Multiple single to multiple conversion",2025:"Single to multiple conversion",2026:"Convert multiple orders",2027:"Convert multiple single orders"}},Symbol.toStringTag,{value:"Module"})),V4=Object.freeze(Object.defineProperty({__proto__:null,default:{718:"출력 범위의 첫 번째 점을 지정합니다.",719:"출력 범위의 두 번째 점을 지정합니다.",720:"첫 번째 점을 지정합니다.",721:"두 번째 점 지정:",722:"클라우드 와이어프레임 시작점:",723:"클라우드 와이어프레임 끝점:",724:"심사 아이콘 참고 사항:",725:"클릭하여 구름선을 그리기 시작:",726:"다시 클릭하여 클라우드 그리기를 끝냅니다.",727:"점 지정:",728:"두 점 지정:",729:"객체 선택",730:"다음 점을 지정합니다.",731:"\\ 삽입 기준점 지정",732:"테이블 삽입점을 지정하려면 다음과 같이 하십시오.",733:"삽입점을 지정하려면 다음과 같이 하십시오.",734:"삽입 기준점 지정",735:"치수 객체 선택",736:"대상 텍스트 선택",737:"채우기 영역 내부의 점을 지정합니다.",738:"닫힌 영역을 찾을 수 없음",739:"표면 거친도",740:"용접 기호",741:"비트 공차",742:"사용자 정의 속성을 설정할 객체 선택",743:"숨길 객체 선택",744:"삽입점을 지정하려면 다음과 같이 하십시오.",745:"점 지정:",746:"각도 지정",747:"두 점 지정:",748:"해치 객체 선택",749:"첫 번째 점을 지정합니다.",750:"두 번째 점 지정:",751:"두 번째 각도를 지정합니다.",752:"마지막 점을 지정합니다.",753:"좌표점을 지정합니다.",754:"치수 점을 지정하려면 다음과 같이 하십시오.",755:"승인 의견을 입력하십시오.",756:"클라우드 와이어프레임 시작점 지정",757:"클라우드 와이어프레임 끝점 지정",758:"심사 아이콘 주석 지정",759:"첫 번째 구석을 지정합니다.",760:"두 번째 구석 지정:",761:"일련번호 위치를 지정하려면 다음과 같이 하십시오.",762:"회전 기호",763:"태그 유형",764:"태그가 필요한 원을 선택하십시오.",765:"위치 점 또는 선 또는 호 또는 원을 설정하십시오.",766:"드래그하여 치수 위치 결정",767:"각도를 지정하거나 입력하십시오.",768:"용접 기호",769:"위치 점, 선 또는 호를 선택하십시오.",770:"두 번째 점을 지정하십시오.",771:"위치 점을 설정하십시오.",772:"각도를 설정하십시오.",773:"위치 점이나 선 또는 호를 설정하십시오.",774:"지시선 전환점을 설정하십시오.",775:"드래그하여 위치 점 결정",776:"첫 번째 점을 지정하십시오.",777:"두 번째 점을 지정하십시오.",778:"대상 블록 객체를 선택하십시오.",779:"새 블록 이름을 입력하십시오.",780:"기준점을 수정할 블록 선택",781:"기준점 설정",782:"색상을 수정할 블록 선택",783:"색상 색인 입력 (0~256)",784:"소스 블록을 선택하십시오.",785:"브러시할 대상 블록 선택:",786:"연결 방법 선택",787:"수동으로 하나씩 연결",788:"자동 대량 연결",789:"연결된 블록을 선택하십시오.",790:"중심선 길이 설정",791:"회전할 대상 블록을 선택합니다.",792:"회전 각도 설정",793:"배율을 설정하십시오.",794:"선택 범위를 설정하십시오.",795:"대상 블록을 선택하십시오.",796:"통계 범위를 설정하십시오.",797:"테이블 삽입점을 지정하려면 다음과 같이 하십시오.",798:"대상 커브 선택",799:"길이 치수 점 지정",800:"대상 객체 선택",801:"대상 기울기 객체를 선택하십시오.",802:"치수 문자 높이를 설정하십시오.",803:"기울기 치수 점 지정",804:"대상 좌표점을 선택하십시오.",805:"치수 위치를 지정하십시오.",806:"시작점 지정",807:"끝점 지정",808:"치수 방향 지정",809:"텍스트 내용을 설정하십시오.",810:"영역의 첫 번째 점을 선택하십시오.",811:"다음 점을 선택하십시오.",812:"영역 치수의 위치를 선택하십시오.",813:"사각형의 구석 1을 선택하십시오.",814:"사각형의 구석 2 를 선택하십시오.",815:"영역 치수의 위치를 설정하십시오.",816:"측정 점을 선택하십시오.",817:"선을 선택하십시오.",818:"치수 선의 위치를 설정하십시오.",819:"호선을 선택하십시오.",820:"치수 선 위치를 지정하십시오.",821:"원 객체를 선택하십시오.",822:"문자 위치를 지정하십시오.",823:"선의 끝점이나 호를 선택하십시오.",824:"문자의 위치를 지정하십시오.",825:"연속 측정을 위한 치수를 선택하십시오.",826:"두 번째 선을 선택하십시오.",827:"각도 치수의 위치를 설정하십시오.",828:"별 꼭대기 점 수를 입력하십시오.",829:"별의 중심점을 지정하려면:",830:"별의 내부 반지름을 설정하십시오.",831:"별의 외부 반지름을 지정합니다.",832:"범프 선 너비를 입력하십시오<5>",833:"범프 선 높이를 입력하십시오<10>",834:"시작점을 확인하려면 클릭하십시오.",835:"클릭하여 결승점을 확정하세요",836:"앤티앨리어싱 너비를 입력하십시오<5>",837:"앤티앨리어싱 높이 입력<10>",838:"직사각형 너비 입력<5>",839:"직사각형 높이 입력<10>",840:"클릭하여 사각형 중심 확인",841:"파이프 지름을 입력하십시오<10>",842:"파이프 배출구 길이를 입력하십시오<5>",843:"클릭하여 시작점 확인",844:"횡단면 파이프라인 시작점 지정하기",845:"횡단면 파이프라인 끝점 지정하기",846:"횡단면 파이프라인 호 방향 선택",847:"왼쪽",848:"오른쪽",849:"선택 모드",850:"선 용접",851:"아크 용접",852:"용접 반지름을 입력하십시오<5>",853:"호의 두 번째 점 지정하기",854:"호의 끝점 지정하기",855:"폭을 입력하십시오<25>",856:"높이를 입력하십시오<15>",857:"계단 레벨을 입력하십시오<10>",858:"중심 위치를 확인하십시오.",859:"원 반지름을 입력하십시오.",860:"보온면 너비 입력<5>",861:"보온면 높이 입력<10>",862:"다음 점 눌러주세요.",863:"첫 번째 선을 선택하십시오.",864:"두 번째 선을 선택하십시오.",865:"끝점을 선택하십시오.",866:"대상 사각형을 선택하십시오.",867:"나침반 중심점 설정",868:"나침반 반지름 설정",869:"프롬프트 상자 가리키기 선택",870:"메시지 상자의 첫 번째 점을 지정합니다.",871:"메시지 상자의 두 번째 점을 지정합니다.",872:"메시지 상자 방향을 설정하려면 다음과 같이 하십시오.",873:"데이텀 문자 설정하기",874:"문자 높이를 설정하십시오.",875:"데이텀 문자 위치를 설정하십시오.",876:"위치 점이나 호 또는 선을 설정하십시오.",877:"기호 위치를 설정하십시오.",878:"중심점을 설정하십시오.",879:"기어 중심을 설정하십시오.",880:"기어 반지름을 설정하십시오.",881:"중심선 길이 10 설정 >",882:"첫 번째 원을 선택하십시오.",883:"두 번째 원을 선택하십시오.",884:"직사각형의 왼쪽 위 구석을 설정하십시오.",885:"직사각형의 오른쪽 아래 구석을 설정하십시오.",886:"필렛 반지름을 설정하십시오.",887:"다각형 시작점을 선택하십시오.",888:"다각형 교점을 선택하십시오.",889:"객체 선택:",890:"기준점 지정",891:"두 번째 점 지정",892:"어레이",893:"종료",894:"포기",895:"패턴화할 항목 수 입력",896:"호 객체 선택",897:"회전된 객체 복사를 선택합니다.",898:"대상 점을 지정하십시오.",899:"회전 각도를 지정하십시오.",900:"다각형으로 변환할 객체 선택",901:"다각형 모서리 수 설정",902:"입력 옵션",903:"내접 원",904:"원에 외부 탄젠트",905:"색상을 수정할 객체 선택",906:"색상 색인 입력",907:"숨기기",908:"선택 안 함 숨기기",909:"모두 표시",910:"대상의 객체 선택",911:"상자의 첫 번째 점을 삭제하도록 지정합니다.",912:"상자 두 번째 점을 삭제하도록 지정합니다.",913:"정확하게 삭제할 엔티티 선택",914:"각도를 선택하여 객체를 복사합니다.",915:"각도 복사 수량을 입력하십시오.",916:"각도 복사의 기준점을 입력하십시오.",917:"복사 각도를 입력하십시오.",918:"정점 객체를 선택하십시오.",919:"객체 복사를 선택하십시오.",920:"복제 기준점을 확인하십시오.",921:"참조 커브 선택",922:"끊기 객체 선택",923:"오프셋 객체 지정",924:"오프셋 거리를 입력하십시오.",925:"신축 객체 지정 (선, 폴리선, 호 선택)",926:"다음으로 확장",927:"선종류 축척을 수정할 객체 선택",928:"선종류 축척을 입력하십시오.",929:"패턴 간격을 입력하십시오.",930:"호를 선택하십시오.",931:"정렬 객체 선택",932:"정렬 기준점 지정",933:"대상 폴리선을 선택합니다.",934:"필렛 반지름을 입력하십시오<5>",935:"채우기 객체 선택",936:"채우기 축척을 입력하십시오.",937:"원래 채우기 도면을 선택하십시오.",938:"도면 내부의 아무 곳이나 채우려면 클릭하십시오.",939:"선 객체 선택",940:"등분 모드 선택",941:"정거 등분",942:"정수 등분",943:"오프셋 등분",944:"등분 복사",945:"동등한 객체 간격띄우기를 선택하십시오.",946:"등분 객체 복사를 선택하십시오.",947:"등분할 세그먼트를 선택하십시오.",948:"등분 거리를 설정하십시오.",949:"등분 수량을 설정하십시오",950:"오프셋 거리를 설정하십시오.",951:"오프셋 점을 지정하십시오.",952:"복사 기준점을 지정하십시오.",953:"복사 등분 수량을 지정하십시오.",954:"복사 등분 끝점을 지정하십시오.",955:"사각형 배율이 필요한 엔티티를 선택하십시오.",956:"사각형의 구석 1 을 지정하십시오.",957:"사각형 구석 2를 지정하십시오.",958:"중심점 확대 선택",959:"확대 범위를 선택하십시오.",960:"확대 배수를 설정하십시오.",961:"삽입점 확대 를 선택하십시오.",962:"끊을 커브를 선택하십시오.",963:"커브에서 브레이크 점을 선택하십시오.",964:"패턴 수를 입력하십시오.",965:"회전 켜기",966:"예",967:"아니오",968:"배열이 필요한 도면을 선택하십시오.",969:"스토리지 중심점을 선택하십시오.",970:"닫힌 다각형을 선택하십시오!",971:"첫 번째 점을 선택하십시오.",972:"두 번째 점을 선택하십시오.",973:"첫 번째 닫힌 다각형을 선택하십시오.",974:"두 번째 닫힌 다각형을 선택하십시오.",975:"닫힌 다각형 두 개를 선택하십시오.",976:"두 다각형은 겹치는 모서리가 없습니다!",977:"대상 다각형을 선택하십시오.",978:"정점을 추가할 다각형 모서리를 선택하십시오.",979:"추가할 정점 위치를 설정하십시오.",980:"다각형에서 삭제할 정점을 선택하십시오.",981:"다각형으로 밀어낼 모서리를 선택하십시오.",982:"밀어내기 위치를 지정하십시오.",983:"그림 상자 방향을 설정하십시오<N>",984:"가로",985:"세로",986:"액자 크기를 설정하십시오<4>",987:"프레임 위치를 설정하십시오.",988:"트림 각도 점 1 지정",989:"트림된 구석 2 지정",990:"도로 시작점을 설치하세요",991:"다음 점을 설정하십시오.",992:"대상 정렬선 객체 (선 선택) 를 선택하십시오.",993:"대상 문자 객체를 선택하십시오.",994:"문자 객체 선택",995:"높이를 설정하십시오.",996:"글자 폭을 설정하십시오.",997:"원본 텍스트를 선택하십시오.",998:"첫 번째 텍스트를 선택하십시오.",999:"두 번째 텍스트를 선택하십시오.",1e3:"정렬할 문자를 선택하십시오.",1001:"정렬을 선택하십시오.",1002:"왼쪽",1003:"가운데",1004:"오른쪽",1005:"기준점 정렬을 선택하십시오.",1006:"반전할 텍스트를 선택하십시오.",1007:"공백을 제거할 텍스트를 선택하십시오.",1008:"문자 객체를 선택하십시오.",1009:"밑줄 너비를 입력하십시오.",1010:"밑줄 거리를 설정하십시오.",1011:"밑줄 연장 거리를 설정하십시오.",1012:"작업 옵션을 선택하십시오.",1013:"대문자",1014:"소문자",1015:"문장의 첫머리와 대문자.",1016:"디지털 객체를 선택하십시오.",1017:"텍스트 삽입점을 선택하십시오.",1018:"찾을 범위를 선택합니다.",1019:"찾기 모드를 선택하십시오.",1020:"같음",1021:"포함",1022:"접두사는",1023:"접미어는",1024:"키워드를 입력하십시오.",1025:"작업할 범위를 선택합니다.",1026:"작업 방법 선택",1027:"추가",1028:"삭제",1029:"작업 위치 선택",1030:"접두사",1031:"접미어",1032:"내용을 입력하십시오.",1033:"텍스트 선택",1034:"호를 선택하십시오.",1035:"문자 스타일을 선택하십시오.",1036:"텍스트 추출 범위를 설정하십시오.",1037:"오픈 데모 코드 다운로드",1038:"개발 패키지 다운로드",1039:"원선 그리기 명령 호출",1040:"서로 직선을 그리다",1041:"도면층 추가",1042:"모든 도면층 가져오기",1043:"모든 문자 스타일 가져오기",1044:"모든 그림 블록 가져오기",1045:"모든 선 모양 가져오기",1046:"확장 데이터 쓰기",1047:"확장 데이터 읽기",1048:"그림 블록 삽입 테스트",1049:"선을 그리다",1050:"호 그리기",1051:"원을 그리다",1052:"PL 선 그리기",1053:"채우기 그리기",1054:"드로잉 문자",1055:"타원 그리기",1056:"타원형 호를 그리다",1057:"여러 줄 문자 그리기",1058:"테이블 그리기",1059:"QR코드 그리기",1060:"도장 삽입",1061:"모든 객체 가져오기",1062:"상호 객체 선택",1063:"서버에 mxweb 저장",1064:"시스템 변수 가져오기",1065:"새 시트",1066:"흰색 배경색",1067:"텍스트 찾기 위치",1068:"블록으로 솔리드 선택",1069:"단일행 문자 그리기",1070:"선택 채우기",1071:"확장 속성 설정",1072:"정렬 치수 그리기",1073:"회선 치수",1074:"각도 치수",1075:"객체 선종류 수정",1076:"숨겨진 객체 레이어 선택",1077:"현재 선택에 추가",1078:"뷰포트 회전",1079:"확장 레코드 쓰기",1080:"명명 사전 얻기",1081:"문자 스타일 추가",1082:"사용자 솔리드 그리기",1083:"객체 색상 수정",1084:"수정 개체가 보이지 않음",1085:"객체 레이어 수정",1086:"객체 표시 순서 수정",1087:"범위 지정 출력 pdf",1088:"이미지 그리기",1089:"객체 확장 사전 읽기",1090:"3DPolyline 그리기",1091:"선 그리기 텍스트 사용자화 솔리드",1092:"계산 교차점",1093:"문자 스타일 수정",1094:"오프셋 입력 선",1095:"그룹 만들기",1096:"스크린샷 jpg",1097:"시트 동일 문자 가져오기",1098:"범위 출력 dwg 지정",1099:"표식 원 그리기 테스트",1100:"Wipeout 테스트",1101:"잘라낸 블록 생성하기",1102:"공차 치수",1103:"모든 객체 색상 변경",1104:"자르기 mxweb",1105:"현재 색상 선 무게 설정",1106:"다각형 영역 내의 객체 찾기",1107:"객체 깨기",1108:"반투명 선 그리기",1109:"선 유형 추가",1110:"패턴 축척 수정하기",1111:"텍스트 편집 테스트",1112:"바코드 그리기",1113:"스크린샷 bmp",1114:"수정 도구",1115:"문자 도구",1116:"드로잉 도구",1117:"블록 도구",1118:"측정 도구",1119:"치수 도구",1120:"기타 도구",1121:"다중 복제",1122:"호전원",1123:"복사 회전",1124:"원형 다각형",1125:"색상 수정",1126:"호 탄젠트",1127:"임시 숨기기",1128:"상자 삭제",1129:"각도 복사",1130:"정점 복사",1131:"교점이 끊어지다",1132:"양방향 오프셋",1133:"원 크기 변경",1134:"선종류 축척",1135:"신축",1136:"호별 패턴",1137:"pl 필렛",1138:"pl선 대칭 이동",1139:"모든 선 객체 가져오기",1140:"등분",1141:"직사각형 크기 조절",1142:"끊다",1143:"다각형 가공하기",1144:"다각형 결합",1145:"다각형 교점 추가",1146:"다각형 교점 삭제",1147:"다각형 단일 밀어내기",1148:"별 모양",1149:"범프 선",1150:"톱니 선",1151:"중심 사각형",1152:"필렛 사각형",1153:"원 중심선",1154:"파이프",1155:"단면부",1156:"중수선",1157:"계단",1158:"채워진 원",1159:"보온면",1160:"중심선",1161:"구멍을 내다",1162:"메시지 상자",1163:"데이텀 문자 (1)",1164:"용접선",1165:"동심원",1166:"기어",1167:"블록 중심선",1168:"원형 공접선",1169:"데이텀 문자 (2)",1170:"그림 상자 삽입",1171:"도로를 그리다",1172:"다각형 그리기",1173:"선으로 정렬",1174:"고자질",1175:"글자의 폭을 바꾸다",1176:"내용 스밍",1177:"내용을 바꾸다",1178:"좌우 정렬",1179:"위아래 정렬",1180:"문자 반전",1181:"텍스트 상자",1182:"밑줄",1183:"도명선",1184:"대소문자",1185:"숫자 구화",1186:"특정 단어 선택",1187:"접미어",1188:"연결 문자",1189:"공백 제거",1190:"문자 세로 방향",1191:"호별 정렬",1192:"전역 문자 스타일 수정",1193:"텍스트 추출",1194:"문자 번호",1195:"블록 이름 변경",1196:"브러시",1197:"블록 연결",1198:"블록 기준점을 변경하다.",1199:"블록 색상 변경",1200:"다중 블록 회전",1201:"다중 블록 크기 조절",1202:"브러시 각도",1203:"블록별 선택",1204:"블록별로 모두 선택",1205:"통계 단일 블록",1206:"다중 블록 통계",1207:"블록 도면층 수정",1208:"길이",1209:"통계 면적",1210:"지능형 높이",1211:"면적",1212:"직사각형 영역",1213:"점에서 선까지의 거리",1214:"호 길이",1215:"원 측정",1216:"연속 측정",1217:"세그먼트 길이 보기",1218:"영역 포함 호",1219:"심도 치수",1220:"직사각형 치수",1221:"조잡도 치수",1222:"좌표 치수",1223:"슬로프",1224:"정렬",1225:"부분 확대",1226:"일련번호 마크업",1227:"치수 회전",1228:"둥근 구멍 표식",1229:"방향 기호",1230:"방사선 치수",1231:"직사각형 치수 고정 변색",1232:"용지 확장 트림",1233:"화살표 선",1234:"선택한 텍스트",1235:"클립보드로 복사",1236:"취소",1237:"확인",1238:"공차 코드",1239:"공차 1",1240:"공차 2",1241:"부주",1242:"꼭대기",1243:"밑단",1244:"기준",1245:"전주기호",1246:"현재 행",1247:"행 추가",1248:"행 삭제",1249:"제로",1250:"직선도",1251:"평면도",1252:"원도",1253:"원통도",1254:"선 프로파일",1255:"면 프로파일",1256:"평행도",1257:"수직도",1258:"경사도",1259:"위치도",1260:"동축도",1261:"대칭도",1262:"둥글게 뛰다",1263:"올댄스",1264:"지우기",1265:"텍스트 내용 및 번호를 입력하십시오.",1266:"텍스트 내용:",1267:"(0-20자 입력)",1268:"시작 번호:",1269:"(번호 자동 증가 1)",1270:"번호 지정 위치:",1271:"번호 이전",1272:"번호 뒤에",1273:"방향 변경",1274:"왼쪽 텍스트 내용:",1275:"오른쪽 텍스트 내용:",1276:"아래 텍스트 내용:",1277:"기본 기호",1278:"동일 요구 사항",1279:"다수 기호",1280:"긴 모서리 가로줄",1281:"보조 기호",1282:"보충 기호",1283:"기호 위치",1284:"특수 기호",1285:"왼쪽 치수",1286:"위 치수",1287:"오른쪽 치수",1288:"교차 용접",1289:"간격",1290:"텍스트 확장",1291:"점선 위치",1292:"용접 설명",1293:"행 지우기",1294:"볼륨 모서리 용접",1295:"유형 I 용접",1296:"V 용접",1297:"단일 V 용접",1298:"한면 급경사 V 그루브 스택",1299:"용접 기울이기",1300:"분리식 패드",1301:"영구 패드",1302:"리턴 모서리 V 용접",1303:"리턴 모서리 U 용접",1304:"리턴 모서리 단일 V 용접",1305:"리턴 모서리 단일 U 용접",1306:"끝 용접",1307:"스택 용접 커넥터",1308:"커버 용접",1309:"필렛 용접",1310:"플러그 또는 슬롯 용접",1311:"점 용접",1312:"인터페이스 축소",1313:"기울기 커넥터",1314:"점 용접 (가운데 오프셋)",1315:"용접",1316:"용접 (중심 이탈)",1317:"가파른 V 그루브 스택",1318:"첫 번째 평면 기호",1319:"두 번째 오목 기호",1320:"두 번째 볼록 기호",1321:"두 번째 평면 기호",1322:"첫 번째 볼록 기호",1323:"세 번째 평면 기호",1324:"첫 번째 오목 기호",1325:"용접 깎기",1326:"발가락 부드럽게 변환",1327:"개스킷 기호 포함",1328:"3면 용접 기호",1329:"주변 용접 문자",1330:"필드 기호",1331:"꼬리 기호",1332:"인터레이스 띄엄필렛 용접 기호",1333:"플레어 용접",1334:"단일 플레어 용접",1335:"더미 용접",1336:"자물쇠 모서리 용접",1337:"모서리 그루브 잠금",1338:"위",1339:"하",1340:"없음",1341:"basicSymbol",1342:"auxiliarySymbol",1343:"suppleSymbol",1344:"specialSymbol",1345:"형상에 배치할 용접 기호 선택",1346:"용접 각도 너비:",1347:"단일 V 버트 용접(전면)",1348:"필렛 용접 (전면)",1349:"단일 V 버트 용접 (측면 뷰)",1350:"필렛 용접 (측면 뷰)",1985:"테이블 추출",1996:"테이블 추출 정밀도를 입력하십시오.",1997:"추출 범위의 첫 번째 구석 선택",1998:"추출 범위의 두 번째 구석 선택",1999:"유효한 양식이 인식되지 않았습니다!",2e3:"로컬 환경에서 테스트하십시오!",2001:"온라인으로 테이블 편집",2019:"번호 문자 입력",2020:"한 줄 텍스트를 선택하십시오.",2021:"여러 줄 텍스트를 선택하십시오.",2022:"문자 삽입점을 설정하십시오.",2023:"단일행 텍스트 선택",2024:"많이 돌리다",2025:"단일 회전 다중",2026:"다중 회전 다중 시트",2027:"다중 회전 단일"}},Symbol.toStringTag,{value:"Module"})),O4=Object.freeze(Object.defineProperty({__proto__:null,default:{718:"指定輸出範圍第一點：",719:"指定輸出範圍第二點：",720:"指定第一點：",721:"指定第二點：",722:"雲線框起始點：",723:"雲線框結束點：",724:"審圖標注點：",725:"點擊開啟繪製雲線：",726:"再次點擊結束繪製雲線：",727:"指定一點：",728:"指定二點：",729:"選擇對象",730:"指定下一個點：",731:"\\指定插入基點",732:"指定表格插入點：",733:"指定插入點：",734:"指定插入基點",735:"選擇標注對象",736:"請選擇目標文字",737:"指定填充區域內部一點：",738:"沒有找到閉合區域",739:"表面粗糙度",740:"焊接符號",741:"形位公差",742:"選擇要需要開啟自訂屬性的對象",743:"選擇要隱藏的對象",744:"指定插入點：",745:"指定一點：",746:"指定夾角",747:"指定二點：",748:"選擇圖案填充對象",749:"指定第一點：",750:"指定第二點：",751:"指定第二個角度點：",752:"指定最後一個點：",753:"指定座標點：",754:"指定標注點：",755:"請輸入審批意見",756:"指定雲線框起始點",757:"指定雲線框終止點",758:"指定審圖標注點",759:"指定第一個角點：",760:"指定第二個角點：",761:"指定序號位置：",762:"旋轉符號",763:"標記類型",764:"請選擇需要標記的圓：",765:"請設定定位點或直線或圓弧或圓",766:"拖動確定標注位置",767:"請指定或輸入角度",768:"焊縫符號",769:"請拾取定位點、直線或圓弧",770:"請指定第二點",771:"請設定定位點",772:"請設定角度",773:"請設定定位點或直線或圓弧",774:"請設定引線轉捩點",775:"拖動確定定位點",776:"請指定第一點：",777:"請指定第二點：",778:"請選擇目標塊對象",779:"請輸入新塊名",780:"選擇需要修改基點的塊",781:"設定基點",782:"選擇需要修改顏色的塊",783:"輸入顏色索引(0~256)",784:"請選擇源塊",785:"選擇要刷的目標塊：",786:"選擇連接管道",787:"手動逐個連線",788:"自動批量連線",789:"請選擇連線的塊",790:"設定中心線長度",791:"選擇要旋轉的目標塊：",792:"設定旋轉角度",793:"請設定縮放比例",794:"請設定選擇範圍：",795:"請選擇目標塊",796:"請設定統計範圍",797:"指定表格插入點：",798:"選擇目標曲線",799:"指定長度標注點",800:"選擇目標對象",801:"請選擇目標斜率對象",802:"請設定標注文字高度",803:"指定斜率標注點",804:"請選擇目標座標點",805:"請指定標注位置",806:"指定起點",807:"指定終點",808:"指定標注方向",809:"請設定文字內容",810:"請選擇面積的第一個點",811:"請選擇下一個點",812:"請選擇面積標注的位置",813:"請選擇矩形的角點1",814:"請選擇矩形的角點2",815:"請設定面積標注的位置",816:"請選擇一個量測點",817:"請選擇一條直線",818:"請設定尺寸線的位置",819:"請選擇一條弧線",820:"請指定尺寸線位置",821:"請選擇一個圓對象",822:"請指定文字位置",823:"請選擇直線的端點或弧線",824:"請指定文字的位置",825:"請選擇一個連續量測的標注",826:"請選擇第二條直線",827:"請設定角度標注的位置",828:"請輸入星形頂點數：",829:"指定星形中心點：",830:"請設定星形的內半徑：",831:"指定星形的外半徑：",832:"請輸入凹凸線寬度<5>",833:"請輸入凹凸線高度<10>",834:"請點擊確定起始點",835:"請點擊確定終點",836:"請輸入鋸齒線寬度<5>",837:"請輸入鋸齒線高度<10>",838:"請輸入矩形寬度<5>",839:"請輸入矩形高度<10>",840:"請點擊確定矩形中心",841:"請輸入管徑<10>",842:"請輸入長出管口長度<5>",843:"請點擊確定起點",844:"指定剖管線起點",845:"指定剖管線終點",846:"選擇剖管線圓弧方向",847:"左邊",848:"右邊",849:"選擇模式",850:"直線焊縫",851:"弧線焊縫",852:"請輸入焊縫半徑<5>",853:"指定圓弧的第二個點",854:"指定圓弧的端點",855:"請輸入寬度<25>",856:"請輸入高度<15>",857:"請輸入樓梯級數<10>",858:"請確定圓心位置",859:"請輸入圓半徑",860:"請輸入保溫棉寬度<5>",861:"請輸入保溫棉高度<10>",862:"請點擊下一個點",863:"請選擇第一條線",864:"請選擇第二條線",865:"請選擇終點",866:"請選擇目標矩形",867:"設定指北針中心點",868:"設定指北針半徑",869:"選擇提示框指向",870:"指定訊息方塊第一點：",871:"指定訊息方塊第二點：",872:"設定訊息方塊指向：",873:"請設定基準符文字",874:"請設定文字高度",875:"請設定基準符位置",876:"請設定定位點或圓弧或直線",877:"請設定符號位置",878:"請設定圓心",879:"請設定齒輪圓心",880:"請設定齒輪半徑",881:"請設定中心線長度10>",882:"請選擇第一個圓",883:"請選擇第二個圓",884:"請設定矩形左上角點",885:"請設定矩形右下角點",886:"請設定圓角半徑",887:"請選擇多邊形起點",888:"請選擇多邊形頂點",889:"選擇對象：",890:"指定基點",891:"指定第二個點",892:"陣列",893:"退出",894:"放弃",895:"輸入要進行陣列的項目數",896:"選擇圓弧對象",897:"選擇複製旋轉對象：",898:"請指定目標點",899:"請指定旋轉角度",900:"選擇要轉成多邊形的對象",901:"設定多邊形邊數",902:"輸入選項",903:"內接於圓",904:"外切於圓",905:"選擇要修改顏色的對象",906:"輸入顏色索引",907:"隱藏",908:"隱藏未選",909:"全部顯示",910:"選擇目標的對象",911:"指定删除方框第一點：",912:"指定删除方框第二點：",913:"選擇需要精確删除的實體",914:"請選擇角度複製對象",915:"請輸入角度複製數量",916:"請輸入角度複製的基點",917:"請輸入複製角度",918:"請選擇頂點對象",919:"請選擇複製對象",920:"請確定複製基點",921:"請選擇參攷曲線",922:"選擇打斷對象",923:"指定偏移對象",924:"請輸入偏移距離",925:"指定伸縮對象(選擇直線、多段線、圓弧)",926:"伸縮至",927:"選擇要修改線型比例的對象",928:"請輸入線型比例",929:"請輸入陣列間距",930:"請選擇圓弧",931:"選擇排列對象",932:"指定排列基點",933:"選擇目標多段線：",934:"請輸入圓角半徑<5>",935:"選擇填充對象",936:"請輸入填充比例",937:"請選擇原填充圖形",938:"請點擊填充圖形內部任意一點",939:"請選擇線對象",940:"選擇等分模式",941:"定距等分",942:"定數等分",943:"偏移等分",944:"複製等分",945:"請選擇偏移等分對象",946:"請選擇複製等分對象",947:"請選擇需要等分的線段",948:"請設定等分距離",949:"請設定等分的數量",950:"請設定偏移距離",951:"請指定偏移點",952:"請指定複製基點",953:"請指定複製等分數量",954:"請指定複製等分端點",955:"請選擇需要矩形縮放的實體：",956:"請指定矩形的角點1",957:"請指定矩形角點2",958:"請選擇放大中心點",959:"請選擇放大範圍",960:"請設定放大倍數",961:"請選擇放大插入點",962:"請選擇一條需要打斷的曲線",963:"請在曲線上選取打斷點",964:"請輸入陣列數量",965:"是否開啟旋轉",966:"是",967:"否",968:"請選擇需要陣列的圖形：",969:"請選擇陣列中心點",970:"請選擇閉合多邊形！",971:"請選擇第一個點",972:"請選擇第二個點",973:"請選擇第一個閉合多邊形",974:"請選擇第二個閉合多邊形",975:"請選擇兩個閉合多邊形",976:"兩個多邊形沒有重合邊！",977:"請選擇目標多邊形",978:"請選擇多邊形需要添加頂點的邊",979:"請設定添加的頂點位置",980:"請選擇多邊形需要删除的頂點",981:"請選擇多邊形需要拉伸的邊",982:"請指定拉伸位置",983:"請設定圖框方向<N>",984:"橫向",985:"縱向",986:"請設定圖框尺寸<4>",987:"請設定圖框位置",988:"指定裁剪角點1",989:"指定裁剪角點2",990:"請設定道路起點",991:"請設定下一點",992:"請選擇目標對齊線對象(選擇直線)",993:"請選擇目標文字對象",994:"選擇文字對象",995:"請設定字高",996:"請設定字寬",997:"請選擇源文字",998:"請選擇第一個文字",999:"請選擇第二個文字",1e3:"請選擇需要對齊的文字",1001:"請選擇對齊管道",1002:"左",1003:"中",1004:"右",1005:"請選擇對齊基點",1006:"請選擇需要反轉的文字",1007:"請選擇需要去空格的文字",1008:"請選擇文字對象",1009:"請輸入底線寬度",1010:"請設定底線距離",1011:"請設定底線延長距離",1012:"請選擇操作選項",1013:"大寫",1014:"小寫",1015:"句首大寫",1016:"請選擇數位對象",1017:"請選擇文字插入點",1018:"選擇要查找的範圍：",1019:"請選擇查找模式",1020:"等於",1021:"包含",1022:"首碼為",1023:"尾碼為",1024:"請輸入關鍵字",1025:"選擇要操作的範圍：",1026:"選擇操作管道",1027:"添加",1028:"删除",1029:"選擇操作位置",1030:"首碼",1031:"尾碼",1032:"請輸入內容",1033:"請選擇文字",1034:"請選擇圓弧",1035:"請選擇文字樣式",1036:"請設定文字選取範圍",1037:"下載開Demo程式碼",1038:"下載開發包",1039:"調用畫圓線命令",1040:"互動畫直線",1041:"添加圖層",1042:"得到所有圖層",1043:"得到所有文字樣式",1044:"得到所有圖塊",1045:"得到所有線型",1046:"寫擴展數據",1047:"讀擴展數據",1048:"測試插入一個圖塊",1049:"繪直線",1050:"繪圓弧",1051:"繪圓",1052:"繪PL線",1053:"繪填充",1054:"繪文字",1055:"繪橢圓",1056:"繪橢圓弧",1057:"繪製多行文字",1058:"繪製表格",1059:"繪製二維碼",1060:"插入圖章",1061:"得到所有對象",1062:"互動選擇對象",1063:"保存mxweb到服務器",1064:"得到系統變數",1065:"新建圖紙",1066:"白色背景色",1067:"文字查找定位",1068:"選擇實體做塊",1069:"繪製單行文字",1070:"選點填充",1071:"設定擴展内容",1072:"繪製對齊標注",1073:"繪性線標注",1074:"角度標注",1075:"修改對象線型",1076:"選擇隱藏對象層",1077:"添加到當前選擇",1078:"視區旋轉",1079:"寫擴展記錄",1080:"得到命名字典",1081:"添加文字樣式",1082:"繪自定義實體",1083:"修改對象顏色",1084:"修改對象不可見",1085:"修改對象層",1086:"修改對象顯示順序",1087:"指定範圍輸出pdf",1088:"繪製image",1089:"讀取對象擴展字典",1090:"繪製3DPolyline",1091:"繪線文字自定義實體",1092:"計算交點",1093:"修改文字樣式",1094:"偏移輸入畫線",1095:"創建組",1096:"螢幕截圖jpg",1097:"獲取圖紙相同文字",1098:"指定範圍輸出dwg",1099:"測試繪製標記圓",1100:"測試Wipeout",1101:"創建剪切塊",1102:"公差標注",1103:"改所有對象顏色",1104:"切剪mxweb",1105:"設定當前顏色線重",1106:"查找多邊形區域內對象",1107:"打碎對象",1108:"繪半透明線",1109:"添加線型",1110:"修改圖案比例",1111:"測試文字編輯",1112:"繪製條碼",1113:"螢幕截圖bmp",1114:"修改工具",1115:"文字工具",1116:"繪圖工具",1117:"塊工具",1118:"量測工具",1119:"標注工具",1120:"其他工具",1121:"多重複製",1122:"弧轉圓",1123:"複製旋轉",1124:"圓轉多邊",1125:"修改顏色",1126:"圓弧切角",1127:"臨時隱藏",1128:"方框删除",1129:"角度複製",1130:"頂點複製",1131:"交點打斷",1132:"雙向偏移",1133:"改圓大小",1134:"線型比例",1135:"伸縮",1136:"按弧陣列",1137:"pl圓角",1138:"pl線反向",1139:"得到所有直線對象",1140:"等分",1141:"矩形縮放",1142:"打斷",1143:"切割多邊形",1144:"合併多邊形",1145:"添加多邊形頂點",1146:"删除多邊形頂點",1147:"多邊形單邊拉伸",1148:"星形",1149:"凹凸線",1150:"鋸齒線",1151:"中心矩形",1152:"圓角矩形",1153:"圓中心線",1154:"筦道",1155:"剖管符",1156:"中垂線",1157:"樓梯",1158:"實心圓",1159:"保溫棉",1160:"中心線",1161:"開洞",1162:"訊息方塊",1163:"基準符(1)",1164:"焊縫線",1165:"同心圓",1166:"齒輪",1167:"塊中心線",1168:"圓公切線",1169:"基準符(2)",1170:"插入圖框",1171:"繪製道路",1172:"繪任意多邊形",1173:"按線對齊",1174:"改字高",1175:"改字寬",1176:"刷內容",1177:"換內容",1178:"左右對齊",1179:"上下對齊",1180:"文字反轉",1181:"文字加框",1182:"底線",1183:"圖名線",1184:"大小寫",1185:"數位求和",1186:"選特定字",1187:"前尾碼",1188:"連接文字",1189:"去空格",1190:"文字豎向",1191:"按弧對齊",1192:"修改全域文字樣式",1193:"選取文字",1194:"文字編號",1195:"改塊名",1196:"刷塊",1197:"塊連線",1198:"改塊基點",1199:"改塊顏色",1200:"多塊旋轉",1201:"多塊縮放",1202:"刷塊角度",1203:"按塊選擇",1204:"按塊全選",1205:"統計單塊",1206:"統計多塊",1207:"修改塊圖層",1208:"長度",1209:"統計面積",1210:"智慧標高",1211:"面積",1212:"矩形面積",1213:"點到直線的距離",1214:"弧長",1215:"量測圓",1216:"連續量測",1217:"查看分段長度",1218:"面積含弧線",1219:"審圖標注",1220:"矩形標注",1221:"粗糙度標注",1222:"座標標注",1223:"標斜率",1224:"對齊",1225:"局部放大",1226:"序號標注",1227:"旋轉標注",1228:"圓孔標記",1229:"向視符號",1230:"射線標注",1231:"矩形標注懸停變色",1232:"裁剪圖紙擴展",1233:"箭頭直線",1234:"選擇的文字",1235:"複製到剪貼板",1236:"取消",1237:"確定",1238:"公差代號",1239:"公差1",1240:"公差2",1241:"附注",1242:"頂端",1243:"底端",1244:"基準",1245:"全周符號",1246:"當前行",1247:"新增行",1248:"删除行",1249:"清零",1250:"直線度",1251:"平面度",1252:"圓度",1253:"圓柱度",1254:"線輪廓度",1255:"面輪廓度",1256:"平行度",1257:"垂直度",1258:"傾斜度",1259:"位置度",1260:"同軸度",1261:"對稱度",1262:"圓跳動",1263:"全跳動",1264:"清除",1265:"請輸入文字內容和編號：",1266:"文字內容：",1267:"(輸入0-20個字)",1268:"起始編號：",1269:"(編號自動遞增1)",1270:"編號位置：",1271:"編號在前",1272:"編號在後",1273:"改變方向",1274:"左邊文字內容：",1275:"右邊文字內容：",1276:"底部文字內容：",1277:"基本符號",1278:"相同要求",1279:"多數符號",1280:"長邊加橫線",1281:"輔助符號",1282:"補充符號",1283:"符號位置",1284:"特殊符號",1285:"左尺寸",1286:"上尺寸",1287:"右尺寸",1288:"交錯焊縫",1289:"間距",1290:"擴充文字",1291:"虛線位置",1292:"焊接說明",1293:"清除行",1294:"卷邊焊縫",1295:"I型焊縫",1296:"V型焊縫",1297:"單邊V型焊縫",1298:"單邊陡側V型坡口堆焊",1299:"傾斜焊縫",1300:"可移除襯墊",1301:"持久襯墊",1302:"帶頓邊V型焊縫",1303:"帶頓邊U型焊縫",1304:"帶頓邊單邊V型焊縫",1305:"帶頓邊單邊U型焊縫",1306:"端接焊縫",1307:"堆焊接頭",1308:"封底焊縫",1309:"角焊縫",1310:"塞焊縫或槽焊縫",1311:"點焊縫",1312:"折疊介面",1313:"傾斜介面",1314:"點焊縫(偏移中心)",1315:"縫焊縫",1316:"縫焊縫(偏離中心)",1317:"陡側V型坡口堆焊",1318:"第一種平面符號",1319:"第二種凹面符號",1320:"第二種凸面符號",1321:"第二種平面符號",1322:"第一種凸面符號",1323:"第三種平面符號",1324:"第一種凹面符號",1325:"削平焊縫",1326:"趾部平滑過渡",1327:"帶墊板符號",1328:"三面焊縫符號",1329:"周圍焊接符",1330:"現場符號",1331:"尾部符號",1332:"交錯斷續焊接符號",1333:"喇叭形焊縫",1334:"單邊喇叭形焊縫",1335:"堆焊縫",1336:"鎖邊焊縫",1337:"鎖邊坡口",1338:"上",1339:"下",1340:"無",1341:"basicSymbol",1342:"auxiliarySymbol",1343:"suppleSymbol",1344:"specialSymbol",1345:"選擇要在幾何圖形上放置的焊縫符號",1346:"焊角寬度：",1347:"單邊V型對接焊縫(前視圖)",1348:"角焊縫(前視圖)",1349:"單邊V型對接焊縫(側視圖)",1350:"角焊縫(側視圖)",1985:"選取表格",1996:"請輸入表格選取精度",1997:"選擇選取範圍第一個角點",1998:"選擇選取範圍第二個角點",1999:"未識別到有效表格！",2e3:"請在本地環境測試！",2001:"線上編輯表格",2019:"輸入編號文字",2020:"請選擇一個單行文字",2021:"請選擇一個多行文字",2022:"請設定文字插入點",2023:"請選擇單行文字",2024:"多單轉一多",2025:"單轉多",2026:"多轉多個單",2027:"多轉單個單"}},Symbol.toStringTag,{value:"Module"}))})(Mx,MxCAD,MXCADAPP_EXTERNALLIBRARIES.Vue,MXCADAPP_EXTERNALLIBRARIES.vuetifyComponents,MXCADAPP_EXTERNALLIBRARIES.axios);
+`),Oe={specular:{value:new ti().setHex(16777215)},glossiness:{value:1},specularMap:{value:null},glossinessMap:{value:null}};this._extraUniforms=Oe,this.onBeforeCompile=function(qe){for(var tt in Oe)qe.uniforms[tt]=Oe[tt];qe.fragmentShader=qe.fragmentShader.replace("uniform float roughness;","uniform vec3 specular;"),qe.fragmentShader=qe.fragmentShader.replace("uniform float metalness;","uniform float glossiness;"),qe.fragmentShader=qe.fragmentShader.replace("#include <roughnessmap_pars_fragment>",pe),qe.fragmentShader=qe.fragmentShader.replace("#include <metalnessmap_pars_fragment>",ze),qe.fragmentShader=qe.fragmentShader.replace("#include <roughnessmap_fragment>",Re),qe.fragmentShader=qe.fragmentShader.replace("#include <metalnessmap_fragment>",Se),qe.fragmentShader=qe.fragmentShader.replace("#include <lights_physical_fragment>",et)},Object.defineProperties(this,{specular:{get:function(){return Oe.specular.value},set:function(qe){Oe.specular.value=qe}},specularMap:{get:function(){return Oe.specularMap.value},set:function(qe){Oe.specularMap.value=qe}},glossiness:{get:function(){return Oe.glossiness.value},set:function(qe){Oe.glossiness.value=qe}},glossinessMap:{get:function(){return Oe.glossinessMap.value},set:function(qe){Oe.glossinessMap.value=qe,qe?(this.defines.USE_GLOSSINESSMAP="",this.defines.USE_ROUGHNESSMAP=""):(delete this.defines.USE_ROUGHNESSMAP,delete this.defines.USE_GLOSSINESSMAP)}}}),delete this.metalness,delete this.roughness,delete this.metalnessMap,delete this.roughnessMap,this.setValues(be)}E.prototype=Object.create(Xr.prototype),E.prototype.constructor=E,E.prototype.copy=function(be){return Xr.prototype.copy.call(this,be),this.specularMap=be.specularMap,this.specular.copy(be.specular),this.glossinessMap=be.glossinessMap,this.glossiness=be.glossiness,delete this.metalness,delete this.roughness,delete this.metalnessMap,delete this.roughnessMap,this};function P(){return{name:n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS,specularGlossinessParams:["color","map","lightMap","lightMapIntensity","aoMap","aoMapIntensity","emissive","emissiveIntensity","emissiveMap","bumpMap","bumpScale","normalMap","normalMapType","displacementMap","displacementScale","displacementBias","specularMap","specular","glossinessMap","glossiness","alphaMap","envMap","envMapIntensity","refractionRatio"],getMaterialType:function(){return E},extendParams:function(be,pe,ze){var Re=pe.extensions[this.name];be.color=new ti(1,1,1),be.opacity=1;var Se=[];if(Array.isArray(Re.diffuseFactor)){var et=Re.diffuseFactor;be.color.fromArray(et),be.opacity=et[3]}if(Re.diffuseTexture!==void 0&&Se.push(ze.assignTexture(be,"map",Re.diffuseTexture)),be.emissive=new ti(0,0,0),be.glossiness=Re.glossinessFactor!==void 0?Re.glossinessFactor:1,be.specular=new ti(1,1,1),Array.isArray(Re.specularFactor)&&be.specular.fromArray(Re.specularFactor),Re.specularGlossinessTexture!==void 0){var Oe=Re.specularGlossinessTexture;Se.push(ze.assignTexture(be,"glossinessMap",Oe)),Se.push(ze.assignTexture(be,"specularMap",Oe))}return Promise.all(Se)},createMaterial:function(be){var pe=new E(be);return pe.fog=!0,pe.color=be.color,pe.map=be.map===void 0?null:be.map,pe.lightMap=null,pe.lightMapIntensity=1,pe.aoMap=be.aoMap===void 0?null:be.aoMap,pe.aoMapIntensity=1,pe.emissive=be.emissive,pe.emissiveIntensity=1,pe.emissiveMap=be.emissiveMap===void 0?null:be.emissiveMap,pe.bumpMap=be.bumpMap===void 0?null:be.bumpMap,pe.bumpScale=1,pe.normalMap=be.normalMap===void 0?null:be.normalMap,pe.normalMapType=pl,be.normalScale&&(pe.normalScale=be.normalScale),pe.displacementMap=null,pe.displacementScale=1,pe.displacementBias=0,pe.specularMap=be.specularMap===void 0?null:be.specularMap,pe.specular=be.specular,pe.glossinessMap=be.glossinessMap===void 0?null:be.glossinessMap,pe.glossiness=be.glossiness,pe.alphaMap=null,pe.envMap=be.envMap===void 0?null:be.envMap,pe.envMapIntensity=1,pe.refractionRatio=.98,pe}}}function I(){this.name=n.KHR_MESH_QUANTIZATION}function z(be,pe,ze,Re){Kr.call(this,be,pe,ze,Re)}z.prototype=Object.create(Kr.prototype),z.prototype.constructor=z,z.prototype.copySampleValue_=function(be){for(var pe=this.resultBuffer,ze=this.sampleValues,Re=this.valueSize,Se=be*Re*3+Re,et=0;et!==Re;et++)pe[et]=ze[Se+et];return pe},z.prototype.beforeStart_=z.prototype.copySampleValue_,z.prototype.afterEnd_=z.prototype.copySampleValue_,z.prototype.interpolate_=function(be,pe,ze,Re){for(var Se=this.resultBuffer,et=this.sampleValues,Oe=this.valueSize,qe=Oe*2,tt=Oe*3,Ge=Re-pe,at=(ze-pe)/Ge,mt=at*at,Lt=mt*at,oi=be*tt,wi=oi-tt,le=-2*Lt+3*mt,Ee=Lt-mt,Tt=1-le,bt=Ee-mt+at,Ai=0;Ai!==Oe;Ai++){var gi=et[wi+Ai+Oe],li=et[wi+Ai+qe]*Ge,xi=et[oi+Ai+Oe],Si=et[oi+Ai]*Ge;Se[Ai]=Tt*gi+bt*li+le*xi+Ee*Si}return Se};var k={FLOAT:5126,FLOAT_MAT3:35675,FLOAT_MAT4:35676,FLOAT_VEC2:35664,FLOAT_VEC3:35665,FLOAT_VEC4:35666,LINEAR:9729,REPEAT:10497,SAMPLER_2D:35678,POINTS:0,LINES:1,LINE_LOOP:2,LINE_STRIP:3,TRIANGLES:4,TRIANGLE_STRIP:5,TRIANGLE_FAN:6,UNSIGNED_BYTE:5121,UNSIGNED_SHORT:5123},G={5120:Int8Array,5121:Uint8Array,5122:Int16Array,5123:Uint16Array,5125:Uint32Array,5126:Float32Array},q={9728:Yn,9729:$n,9984:Ef,9985:iv,9986:Pf,9987:Sc},Z={33071:Rr,33648:Oh,10497:dl},re={SCALAR:1,VEC2:2,VEC3:3,VEC4:4,MAT2:4,MAT3:9,MAT4:16},ie={POSITION:"position",NORMAL:"normal",TANGENT:"tangent",TEXCOORD_0:"uv",TEXCOORD_1:"uv2",COLOR_0:"color",WEIGHTS_0:"skinWeight",JOINTS_0:"skinIndex"},ae={scale:"scale",translation:"position",rotation:"quaternion",weights:"morphTargetInfluences"},Ae={CUBICSPLINE:void 0,LINEAR:Ec,STEP:Hh},me={OPAQUE:"OPAQUE",MASK:"MASK",BLEND:"BLEND"},Ie={"image/png":No,"image/jpeg":zs};function Xe(be,pe){return typeof be!="string"||be===""?"":(/^https?:\/\//i.test(pe)&&/^\//.test(be)&&(pe=pe.replace(/(^https?:\/\/[^\/]+).*/i,"$1")),/^(https?:)?\/\//i.test(be)||/^data:.*,.*$/i.test(be)||/^blob:.*$/i.test(be)?be:pe+be)}function je(be){return be.DefaultMaterial===void 0&&(be.DefaultMaterial=new Xr({color:16777215,emissive:0,metalness:1,roughness:1,transparent:!1,depthTest:!0,side:wc})),be.DefaultMaterial}function De(be,pe,ze){for(var Re in ze.extensions)be[Re]===void 0&&(pe.userData.gltfExtensions=pe.userData.gltfExtensions||{},pe.userData.gltfExtensions[Re]=ze.extensions[Re])}function Le(be,pe){pe.extras!==void 0&&(typeof pe.extras=="object"?Object.assign(be.userData,pe.extras):console.warn("THREE.GLTFLoader: Ignoring primitive type .extras, "+pe.extras))}function He(be,pe,ze){for(var Re=!1,Se=!1,et=0,Oe=pe.length;et<Oe;et++){var qe=pe[et];if(qe.POSITION!==void 0&&(Re=!0),qe.NORMAL!==void 0&&(Se=!0),Re&&Se)break}if(!Re&&!Se)return Promise.resolve(be);for(var tt=[],Ge=[],et=0,Oe=pe.length;et<Oe;et++){var qe=pe[et];if(Re){var at=qe.POSITION!==void 0?ze.getDependency("accessor",qe.POSITION):be.attributes.position;tt.push(at)}if(Se){var at=qe.NORMAL!==void 0?ze.getDependency("accessor",qe.NORMAL):be.attributes.normal;Ge.push(at)}}return Promise.all([Promise.all(tt),Promise.all(Ge)]).then(function(mt){var Lt=mt[0],oi=mt[1];return Re&&(be.morphAttributes.position=Lt),Se&&(be.morphAttributes.normal=oi),be.morphTargetsRelative=!0,be})}function Ue(be,pe){if(be.updateMorphTargets(),pe.weights!==void 0)for(var ze=0,Re=pe.weights.length;ze<Re;ze++)be.morphTargetInfluences[ze]=pe.weights[ze];if(pe.extras&&Array.isArray(pe.extras.targetNames)){var Se=pe.extras.targetNames;if(be.morphTargetInfluences.length===Se.length){be.morphTargetDictionary={};for(var ze=0,Re=Se.length;ze<Re;ze++)be.morphTargetDictionary[Se[ze]]=ze}else console.warn("THREE.GLTFLoader: Invalid extras.targetNames length. Ignoring names.")}}function ot(be){var pe=be.extensions&&be.extensions[n.KHR_DRACO_MESH_COMPRESSION],ze;return pe?ze="draco:"+pe.bufferView+":"+pe.indices+":"+Ct(pe.attributes):ze=be.indices+":"+Ct(be.attributes)+":"+be.mode,ze}function Ct(be){for(var pe="",ze=Object.keys(be).sort(),Re=0,Se=ze.length;Re<Se;Re++)pe+=ze[Re]+":"+be[ze[Re]]+";";return pe}function ft(be,pe,ze){this.json=be||{},this.extensions=pe||{},this.options=ze||{},this.cache=new t,this.primitiveCache={},this.textureLoader=new Im(this.options.manager),this.textureLoader.setCrossOrigin(this.options.crossOrigin),this.fileLoader=new Co(this.options.manager),this.fileLoader.setResponseType("arraybuffer"),this.options.crossOrigin==="use-credentials"&&this.fileLoader.setWithCredentials(!0)}ft.prototype.parse=function(be,pe){var ze=this,Re=this.json,Se=this.extensions;this.cache.removeAll(),this.markDefs(),Promise.all([this.getDependencies("scene"),this.getDependencies("animation"),this.getDependencies("camera")]).then(function(et){var Oe={scene:et[0][Re.scene||0],scenes:et[0],animations:et[1],cameras:et[2],asset:Re.asset,parser:ze,userData:{}};De(Se,Oe,Re),Le(Oe,Re),be(Oe)}).catch(pe)},ft.prototype.markDefs=function(){for(var be=this.json.nodes||[],pe=this.json.skins||[],ze=this.json.meshes||[],Re={},Se={},et=0,Oe=pe.length;et<Oe;et++)for(var qe=pe[et].joints,tt=0,Ge=qe.length;tt<Ge;tt++)be[qe[tt]].isBone=!0;for(var at=0,mt=be.length;at<mt;at++){var Lt=be[at];Lt.mesh!==void 0&&(Re[Lt.mesh]===void 0&&(Re[Lt.mesh]=Se[Lt.mesh]=0),Re[Lt.mesh]++,Lt.skin!==void 0&&(ze[Lt.mesh].isSkinnedMesh=!0))}this.json.meshReferences=Re,this.json.meshUses=Se},ft.prototype.getDependency=function(be,pe){var ze=be+":"+pe,Re=this.cache.get(ze);if(!Re){switch(be){case"scene":Re=this.loadScene(pe);break;case"node":Re=this.loadNode(pe);break;case"mesh":Re=this.loadMesh(pe);break;case"accessor":Re=this.loadAccessor(pe);break;case"bufferView":Re=this.loadBufferView(pe);break;case"buffer":Re=this.loadBuffer(pe);break;case"material":Re=this.loadMaterial(pe);break;case"texture":Re=this.loadTexture(pe);break;case"skin":Re=this.loadSkin(pe);break;case"animation":Re=this.loadAnimation(pe);break;case"camera":Re=this.loadCamera(pe);break;case"light":Re=this.extensions[n.KHR_LIGHTS_PUNCTUAL].loadLight(pe);break;default:throw new Error("Unknown type: "+be)}this.cache.add(ze,Re)}return Re},ft.prototype.getDependencies=function(be){var pe=this.cache.get(be);if(!pe){var ze=this,Re=this.json[be+(be==="mesh"?"es":"s")]||[];pe=Promise.all(Re.map(function(Se,et){return ze.getDependency(be,et)})),this.cache.add(be,pe)}return pe},ft.prototype.loadBuffer=function(be){var pe=this.json.buffers[be],ze=this.fileLoader;if(pe.type&&pe.type!=="arraybuffer")throw new Error("THREE.GLTFLoader: "+pe.type+" buffer type is not supported.");if(pe.uri===void 0&&be===0)return Promise.resolve(this.extensions[n.KHR_BINARY_GLTF].body);var Re=this.options;return new Promise(function(Se,et){ze.load(Xe(pe.uri,Re.path),Se,void 0,function(){et(new Error('THREE.GLTFLoader: Failed to load buffer "'+pe.uri+'".'))})})},ft.prototype.loadBufferView=function(be){var pe=this.json.bufferViews[be];return this.getDependency("buffer",pe.buffer).then(function(ze){var Re=pe.byteLength||0,Se=pe.byteOffset||0;return ze.slice(Se,Se+Re)})},ft.prototype.loadAccessor=function(be){var pe=this,ze=this.json,Re=this.json.accessors[be];if(Re.bufferView===void 0&&Re.sparse===void 0)return Promise.resolve(null);var Se=[];return Re.bufferView!==void 0?Se.push(this.getDependency("bufferView",Re.bufferView)):Se.push(null),Re.sparse!==void 0&&(Se.push(this.getDependency("bufferView",Re.sparse.indices.bufferView)),Se.push(this.getDependency("bufferView",Re.sparse.values.bufferView))),Promise.all(Se).then(function(et){var Oe=et[0],qe=re[Re.type],tt=G[Re.componentType],Ge=tt.BYTES_PER_ELEMENT,at=Ge*qe,mt=Re.byteOffset||0,Lt=Re.bufferView!==void 0?ze.bufferViews[Re.bufferView].byteStride:void 0,oi=Re.normalized===!0,wi,le;if(Lt&&Lt!==at){var Ee=Math.floor(mt/Lt),Tt="InterleavedBuffer:"+Re.bufferView+":"+Re.componentType+":"+Ee+":"+Re.count,bt=pe.cache.get(Tt);bt||(wi=new tt(Oe,Ee*Lt,Re.count*Lt/Ge),bt=new Ws(wi,Lt/Ge),pe.cache.add(Tt,bt)),le=new ad(bt,qe,mt%Lt/Ge,oi)}else Oe===null?wi=new tt(Re.count*qe):wi=new tt(Oe,mt,Re.count*qe),le=new Fi(wi,qe,oi);if(Re.sparse!==void 0){var Ai=re.SCALAR,gi=G[Re.sparse.indices.componentType],li=Re.sparse.indices.byteOffset||0,xi=Re.sparse.values.byteOffset||0,Si=new gi(et[1],li,Re.sparse.count*Ai),ci=new tt(et[2],xi,Re.sparse.count*qe);Oe!==null&&(le=new Fi(le.array.slice(),le.itemSize,le.normalized));for(var Gt=0,si=Si.length;Gt<si;Gt++){var Yt=Si[Gt];if(le.setX(Yt,ci[Gt*qe]),qe>=2&&le.setY(Yt,ci[Gt*qe+1]),qe>=3&&le.setZ(Yt,ci[Gt*qe+2]),qe>=4&&le.setW(Yt,ci[Gt*qe+3]),qe>=5)throw new Error("THREE.GLTFLoader: Unsupported itemSize in sparse BufferAttribute.")}}return le})},ft.prototype.loadTexture=function(be){var pe=this,ze=this.json,Re=this.options,Se=this.textureLoader,et=window.URL||window.webkitURL,Oe=ze.textures[be],qe=Oe.extensions||{},tt;qe[n.MSFT_TEXTURE_DDS]?tt=ze.images[qe[n.MSFT_TEXTURE_DDS].source]:tt=ze.images[Oe.source];var Ge=tt.uri,at=!1;return tt.bufferView!==void 0&&(Ge=pe.getDependency("bufferView",tt.bufferView).then(function(mt){at=!0;var Lt=new Blob([mt],{type:tt.mimeType});return Ge=et.createObjectURL(Lt),Ge})),Promise.resolve(Ge).then(function(mt){var Lt=Re.manager.getHandler(mt);return Lt||(Lt=qe[n.MSFT_TEXTURE_DDS]?pe.extensions[n.MSFT_TEXTURE_DDS].ddsLoader:Se),new Promise(function(oi,wi){Lt.load(Xe(mt,Re.path),oi,void 0,wi)})}).then(function(mt){at===!0&&et.revokeObjectURL(Ge),mt.flipY=!1,Oe.name!==void 0&&(mt.name=Oe.name),tt.mimeType in Ie&&(mt.format=Ie[tt.mimeType]);var Lt=ze.samplers||{},oi=Lt[Oe.sampler]||{};return mt.magFilter=q[oi.magFilter]||$n,mt.minFilter=q[oi.minFilter]||Sc,mt.wrapS=Z[oi.wrapS]||dl,mt.wrapT=Z[oi.wrapT]||dl,mt})},ft.prototype.assignTexture=function(be,pe,ze){var Re=this;return this.getDependency("texture",ze.index).then(function(Se){if(!Se.isCompressedTexture)switch(pe){case"aoMap":case"emissiveMap":case"metalnessMap":case"normalMap":case"roughnessMap":Se.format=zs;break}if(ze.texCoord!==void 0&&ze.texCoord!=0&&!(pe==="aoMap"&&ze.texCoord==1)&&console.warn("THREE.GLTFLoader: Custom UV set "+ze.texCoord+" for texture "+pe+" not yet supported."),Re.extensions[n.KHR_TEXTURE_TRANSFORM]){var et=ze.extensions!==void 0?ze.extensions[n.KHR_TEXTURE_TRANSFORM]:void 0;et&&(Se=Re.extensions[n.KHR_TEXTURE_TRANSFORM].extendTexture(Se,et))}be[pe]=Se})},ft.prototype.assignFinalMaterial=function(be){var pe=be.geometry,ze=be.material;this.extensions;var Re=pe.attributes.tangent!==void 0,Se=pe.attributes.color!==void 0,et=pe.attributes.normal===void 0,Oe=be.isSkinnedMesh===!0,qe=Object.keys(pe.morphAttributes).length>0,tt=qe&&pe.morphAttributes.normal!==void 0;if(be.isPoints){var Ge="PointsMaterial:"+ze.uuid,at=this.cache.get(Ge);at||(at=new Aa,ki.prototype.copy.call(at,ze),at.color.copy(ze.color),at.map=ze.map,at.sizeAttenuation=!1,this.cache.add(Ge,at)),ze=at}else if(be.isLine){var Ge="LineBasicMaterial:"+ze.uuid,mt=this.cache.get(Ge);mt||(mt=new Vn,ki.prototype.copy.call(mt,ze),mt.color.copy(ze.color),this.cache.add(Ge,mt)),ze=mt}if(Re||Se||et||Oe||qe){var Ge="ClonedMaterial:"+ze.uuid+":";ze.isGLTFSpecularGlossinessMaterial&&(Ge+="specular-glossiness:"),Oe&&(Ge+="skinning:"),Re&&(Ge+="vertex-tangents:"),Se&&(Ge+="vertex-colors:"),et&&(Ge+="flat-shading:"),qe&&(Ge+="morph-targets:"),tt&&(Ge+="morph-normals:");var Lt=this.cache.get(Ge);Lt||(Lt=ze.clone(),Oe&&(Lt.skinning=!0),Re&&(Lt.vertexTangents=!0),Se&&(Lt.vertexColors=Ac),et&&(Lt.flatShading=!0),qe&&(Lt.morphTargets=!0),tt&&(Lt.morphNormals=!0),this.cache.add(Ge,Lt)),ze=Lt}ze.aoMap&&pe.attributes.uv2===void 0&&pe.attributes.uv!==void 0&&pe.setAttribute("uv2",new Fi(pe.attributes.uv.array,2)),ze.normalScale&&!Re&&(ze.normalScale.y=-ze.normalScale.y),be.material=ze},ft.prototype.loadMaterial=function(be){var pe=this,ze=this.json,Re=this.extensions,Se=ze.materials[be],et,Oe={},qe=Se.extensions||{},tt=[];if(qe[n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS]){var Ge=Re[n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS];et=Ge.getMaterialType(),tt.push(Ge.extendParams(Oe,Se,pe))}else if(qe[n.KHR_MATERIALS_UNLIT]){var at=Re[n.KHR_MATERIALS_UNLIT];et=at.getMaterialType(),tt.push(at.extendParams(Oe,Se,pe))}else{et=Xr;var mt=Se.pbrMetallicRoughness||{};if(Oe.color=new ti(1,1,1),Oe.opacity=1,Array.isArray(mt.baseColorFactor)){var Lt=mt.baseColorFactor;Oe.color.fromArray(Lt),Oe.opacity=Lt[3]}mt.baseColorTexture!==void 0&&tt.push(pe.assignTexture(Oe,"map",mt.baseColorTexture)),Oe.metalness=mt.metallicFactor!==void 0?mt.metallicFactor:1,Oe.roughness=mt.roughnessFactor!==void 0?mt.roughnessFactor:1,mt.metallicRoughnessTexture!==void 0&&(tt.push(pe.assignTexture(Oe,"metalnessMap",mt.metallicRoughnessTexture)),tt.push(pe.assignTexture(Oe,"roughnessMap",mt.metallicRoughnessTexture)))}Se.doubleSided===!0&&(Oe.side=Uh);var oi=Se.alphaMode||me.OPAQUE;return oi===me.BLEND?Oe.transparent=!0:(Oe.transparent=!1,oi===me.MASK&&(Oe.alphaTest=Se.alphaCutoff!==void 0?Se.alphaCutoff:.5)),Se.normalTexture!==void 0&&et!==xr&&(tt.push(pe.assignTexture(Oe,"normalMap",Se.normalTexture)),Oe.normalScale=new Pt(1,1),Se.normalTexture.scale!==void 0&&Oe.normalScale.set(Se.normalTexture.scale,Se.normalTexture.scale)),Se.occlusionTexture!==void 0&&et!==xr&&(tt.push(pe.assignTexture(Oe,"aoMap",Se.occlusionTexture)),Se.occlusionTexture.strength!==void 0&&(Oe.aoMapIntensity=Se.occlusionTexture.strength)),Se.emissiveFactor!==void 0&&et!==xr&&(Oe.emissive=new ti().fromArray(Se.emissiveFactor)),Se.emissiveTexture!==void 0&&et!==xr&&tt.push(pe.assignTexture(Oe,"emissiveMap",Se.emissiveTexture)),Promise.all(tt).then(function(){var wi;return et===E?wi=Re[n.KHR_MATERIALS_PBR_SPECULAR_GLOSSINESS].createMaterial(Oe):wi=new et(Oe),Se.name!==void 0&&(wi.name=Se.name),wi.map&&(wi.map.encoding=qh),wi.emissiveMap&&(wi.emissiveMap.encoding=qh),Le(wi,Se),Se.extensions&&De(Re,wi,Se),wi})};function _t(be,pe,ze){var Re=pe.attributes,Se=new Oo;if(Re.POSITION!==void 0){var et=ze.json.accessors[Re.POSITION],Oe=et.min,qe=et.max;if(Oe!==void 0&&qe!==void 0)Se.set(new ve(Oe[0],Oe[1],Oe[2]),new ve(qe[0],qe[1],qe[2]));else{console.warn("THREE.GLTFLoader: Missing min/max properties for accessor POSITION.");return}}else return;var tt=pe.targets;if(tt!==void 0)for(var Ge=new ve,at=0,mt=tt.length;at<mt;at++){var Lt=tt[at];if(Lt.POSITION!==void 0){var et=ze.json.accessors[Lt.POSITION],Oe=et.min,qe=et.max;Oe!==void 0&&qe!==void 0?(Ge.setX(Math.max(Math.abs(Oe[0]),Math.abs(qe[0]))),Ge.setY(Math.max(Math.abs(Oe[1]),Math.abs(qe[1]))),Ge.setZ(Math.max(Math.abs(Oe[2]),Math.abs(qe[2]))),Se.expandByVector(Ge)):console.warn("THREE.GLTFLoader: Missing min/max properties for accessor POSITION.")}}be.boundingBox=Se;var oi=new Vs;Se.getCenter(oi.center),oi.radius=Se.min.distanceTo(Se.max)/2,be.boundingSphere=oi}function pt(be,pe,ze){var Re=pe.attributes,Se=[];function et(Ge,at){return ze.getDependency("accessor",Ge).then(function(mt){be.setAttribute(at,mt)})}for(var Oe in Re){var qe=ie[Oe]||Oe.toLowerCase();qe in be.attributes||Se.push(et(Re[Oe],qe))}if(pe.indices!==void 0&&!be.index){var tt=ze.getDependency("accessor",pe.indices).then(function(Ge){be.setIndex(Ge)});Se.push(tt)}return Le(be,pe),_t(be,pe,ze),Promise.all(Se).then(function(){return pe.targets!==void 0?He(be,pe.targets,ze):be})}function Nt(be,pe){var ze=be.getIndex();if(ze===null){var Re=[],Se=be.getAttribute("position");if(Se!==void 0){for(var et=0;et<Se.count;et++)Re.push(et);be.setIndex(Re),ze=be.getIndex()}else return console.error("THREE.GLTFLoader.toTrianglesDrawMode(): Undefined position attribute. Processing not possible."),be}var Oe=ze.count-2,qe=[];if(pe===V1)for(var et=1;et<=Oe;et++)qe.push(ze.getX(0)),qe.push(ze.getX(et)),qe.push(ze.getX(et+1));else for(var et=0;et<Oe;et++)et%2===0?(qe.push(ze.getX(et)),qe.push(ze.getX(et+1)),qe.push(ze.getX(et+2))):(qe.push(ze.getX(et+2)),qe.push(ze.getX(et+1)),qe.push(ze.getX(et)));qe.length/3!==Oe&&console.error("THREE.GLTFLoader.toTrianglesDrawMode(): Unable to generate correct amount of triangles.");var tt=be.clone();return tt.setIndex(qe),tt}return ft.prototype.loadGeometries=function(be){var pe=this,ze=this.extensions,Re=this.primitiveCache;function Se(Lt){return ze[n.KHR_DRACO_MESH_COMPRESSION].decodePrimitive(Lt,pe).then(function(oi){return pt(oi,Lt,pe)})}for(var et=[],Oe=0,qe=be.length;Oe<qe;Oe++){var tt=be[Oe],Ge=ot(tt),at=Re[Ge];if(at)et.push(at.promise);else{var mt;tt.extensions&&tt.extensions[n.KHR_DRACO_MESH_COMPRESSION]?mt=Se(tt):mt=pt(new vi,tt,pe),Re[Ge]={primitive:tt,promise:mt},et.push(mt)}}return Promise.all(et)},ft.prototype.loadMesh=function(be){for(var pe=this,ze=this.json,Re=ze.meshes[be],Se=Re.primitives,et=[],Oe=0,qe=Se.length;Oe<qe;Oe++){var tt=Se[Oe].material===void 0?je(this.cache):this.getDependency("material",Se[Oe].material);et.push(tt)}return et.push(pe.loadGeometries(Se)),Promise.all(et).then(function(Ge){for(var at=Ge.slice(0,Ge.length-1),mt=Ge[Ge.length-1],Lt=[],oi=0,wi=mt.length;oi<wi;oi++){var le=mt[oi],Ee=Se[oi],Tt,bt=at[oi];if(Ee.mode===k.TRIANGLES||Ee.mode===k.TRIANGLE_STRIP||Ee.mode===k.TRIANGLE_FAN||Ee.mode===void 0)Tt=Re.isSkinnedMesh===!0?new hd(le,bt):new Bn(le,bt),Tt.isSkinnedMesh===!0&&!Tt.geometry.attributes.skinWeight.normalized&&Tt.normalizeSkinWeights(),Ee.mode===k.TRIANGLE_STRIP?Tt.geometry=Nt(Tt.geometry,hC):Ee.mode===k.TRIANGLE_FAN&&(Tt.geometry=Nt(Tt.geometry,V1));else if(Ee.mode===k.LINES)Tt=new Xn(le,bt);else if(Ee.mode===k.LINE_STRIP)Tt=new mo(le,bt);else if(Ee.mode===k.LINE_LOOP)Tt=new lm(le,bt);else if(Ee.mode===k.POINTS)Tt=new hm(le,bt);else throw new Error("THREE.GLTFLoader: Primitive mode unsupported: "+Ee.mode);Object.keys(Tt.geometry.morphAttributes).length>0&&Ue(Tt,Re),Tt.name=Re.name||"mesh_"+be,mt.length>1&&(Tt.name+="_"+oi),Le(Tt,Re),pe.assignFinalMaterial(Tt),Lt.push(Tt)}if(Lt.length===1)return Lt[0];for(var Ai=new Al,oi=0,wi=Lt.length;oi<wi;oi++)Ai.add(Lt[oi]);return Ai})},ft.prototype.loadCamera=function(be){var pe,ze=this.json.cameras[be],Re=ze[ze.type];if(!Re){console.warn("THREE.GLTFLoader: Missing camera parameters.");return}return ze.type==="perspective"?pe=new tr(Yi.radToDeg(Re.yfov),Re.aspectRatio||1,Re.znear||1,Re.zfar||2e6):ze.type==="orthographic"&&(pe=new bu(Re.xmag/-2,Re.xmag/2,Re.ymag/2,Re.ymag/-2,Re.znear,Re.zfar)),ze.name!==void 0&&(pe.name=ze.name),Le(pe,ze),Promise.resolve(pe)},ft.prototype.loadSkin=function(be){var pe=this.json.skins[be],ze={joints:pe.joints};return pe.inverseBindMatrices===void 0?Promise.resolve(ze):this.getDependency("accessor",pe.inverseBindMatrices).then(function(Re){return ze.inverseBindMatrices=Re,ze})},ft.prototype.loadAnimation=function(be){for(var pe=this.json,ze=pe.animations[be],Re=[],Se=[],et=[],Oe=[],qe=[],tt=0,Ge=ze.channels.length;tt<Ge;tt++){var at=ze.channels[tt],mt=ze.samplers[at.sampler],Lt=at.target,oi=Lt.node!==void 0?Lt.node:Lt.id,wi=ze.parameters!==void 0?ze.parameters[mt.input]:mt.input,le=ze.parameters!==void 0?ze.parameters[mt.output]:mt.output;Re.push(this.getDependency("node",oi)),Se.push(this.getDependency("accessor",wi)),et.push(this.getDependency("accessor",le)),Oe.push(mt),qe.push(Lt)}return Promise.all([Promise.all(Re),Promise.all(Se),Promise.all(et),Promise.all(Oe),Promise.all(qe)]).then(function(Ee){for(var Tt=Ee[0],bt=Ee[1],Ai=Ee[2],gi=Ee[3],li=Ee[4],xi=[],Si=0,ci=Tt.length;Si<ci;Si++){var Gt=Tt[Si],si=bt[Si],Yt=Ai[Si],Ne=gi[Si],Vt=li[Si];if(Gt!==void 0){Gt.updateMatrix(),Gt.matrixAutoUpdate=!0;var $t;switch(ae[Vt.path]){case ae.weights:$t=vu;break;case ae.rotation:$t=Pd;break;case ae.position:case ae.scale:default:$t=_u;break}var Li=Gt.name?Gt.name:Gt.uuid,di=Ne.interpolation!==void 0?Ae[Ne.interpolation]:Ec,Oi=[];ae[Vt.path]===ae.weights?Gt.traverse(function(Mn){Mn.isMesh===!0&&Mn.morphTargetInfluences&&Oi.push(Mn.name?Mn.name:Mn.uuid)}):Oi.push(Li);var qi=Yt.array;if(Yt.normalized){var Zi;if(qi.constructor===Int8Array)Zi=1/127;else if(qi.constructor===Uint8Array)Zi=1/255;else if(qi.constructor==Int16Array)Zi=1/32767;else if(qi.constructor===Uint16Array)Zi=1/65535;else throw new Error("THREE.GLTFLoader: Unsupported output accessor component type.");for(var Jn=new Float32Array(qi.length),Gi=0,zn=qi.length;Gi<zn;Gi++)Jn[Gi]=qi[Gi]*Zi;qi=Jn}for(var Gi=0,zn=Oi.length;Gi<zn;Gi++){var on=new $t(Oi[Gi]+"."+ae[Vt.path],si.array,qi,di);Ne.interpolation==="CUBICSPLINE"&&(on.createInterpolant=function(Jr){return new z(this.times,this.values,this.getValueSize()/3,Jr)},on.createInterpolant.isInterpolantFactoryMethodGLTFCubicSpline=!0),xi.push(on)}}}var or=ze.name!==void 0?ze.name:"animation_"+be;return new Po(or,void 0,xi)})},ft.prototype.loadNode=function(be){var pe=this.json,ze=this.extensions,Re=this,Se=pe.meshReferences,et=pe.meshUses,Oe=pe.nodes[be];return function(){var qe=[];return Oe.mesh!==void 0&&qe.push(Re.getDependency("mesh",Oe.mesh).then(function(tt){var Ge;if(Se[Oe.mesh]>1){var at=et[Oe.mesh]++;Ge=tt.clone(),Ge.name+="_instance_"+at}else Ge=tt;return Oe.weights!==void 0&&Ge.traverse(function(mt){if(mt.isMesh)for(var Lt=0,oi=Oe.weights.length;Lt<oi;Lt++)mt.morphTargetInfluences[Lt]=Oe.weights[Lt]}),Ge})),Oe.camera!==void 0&&qe.push(Re.getDependency("camera",Oe.camera)),Oe.extensions&&Oe.extensions[n.KHR_LIGHTS_PUNCTUAL]&&Oe.extensions[n.KHR_LIGHTS_PUNCTUAL].light!==void 0&&qe.push(Re.getDependency("light",Oe.extensions[n.KHR_LIGHTS_PUNCTUAL].light)),Promise.all(qe)}().then(function(qe){var tt;if(Oe.isBone===!0?tt=new Vv:qe.length>1?tt=new Al:qe.length===1?tt=qe[0]:tt=new ni,tt!==qe[0])for(var Ge=0,at=qe.length;Ge<at;Ge++)tt.add(qe[Ge]);if(Oe.name!==void 0&&(tt.userData.name=Oe.name,tt.name=Ar.sanitizeNodeName(Oe.name)),Le(tt,Oe),Oe.extensions&&De(ze,tt,Oe),Oe.matrix!==void 0){var mt=new Xi;mt.fromArray(Oe.matrix),tt.applyMatrix4(mt)}else Oe.translation!==void 0&&tt.position.fromArray(Oe.translation),Oe.rotation!==void 0&&tt.quaternion.fromArray(Oe.rotation),Oe.scale!==void 0&&tt.scale.fromArray(Oe.scale);return tt})},ft.prototype.loadScene=function(){function be(pe,ze,Re,Se){var et=Re.nodes[pe];return Se.getDependency("node",pe).then(function(Oe){if(et.skin===void 0)return Oe;var qe;return Se.getDependency("skin",et.skin).then(function(tt){qe=tt;for(var Ge=[],at=0,mt=qe.joints.length;at<mt;at++)Ge.push(Se.getDependency("node",qe.joints[at]));return Promise.all(Ge)}).then(function(tt){return Oe.traverse(function(Ge){if(Ge.isMesh){for(var at=[],mt=[],Lt=0,oi=tt.length;Lt<oi;Lt++){var wi=tt[Lt];if(wi){at.push(wi);var le=new Xi;qe.inverseBindMatrices!==void 0&&le.fromArray(qe.inverseBindMatrices.array,Lt*16),mt.push(le)}else console.warn('THREE.GLTFLoader: Joint "%s" could not be found.',qe.joints[Lt])}Ge.bind(new nm(at,mt),Ge.matrixWorld)}}),Oe})}).then(function(Oe){ze.add(Oe);var qe=[];if(et.children)for(var tt=et.children,Ge=0,at=tt.length;Ge<at;Ge++){var mt=tt[Ge];qe.push(be(mt,Oe,Re,Se))}return Promise.all(qe)})}return function(ze){var Re=this.json,Se=this.extensions,et=this.json.scenes[ze],Oe=this,qe=new Us;et.name!==void 0&&(qe.name=et.name),Le(qe,et),et.extensions&&De(Se,qe,et);for(var tt=et.nodes||[],Ge=[],at=0,mt=tt.length;at<mt;at++)Ge.push(be(tt[at],qe,Re,Oe));return Promise.all(Ge).then(function(){return qe})}}(),e}();function M4(e){new A4().load("./gis/34M_17.gltf",n=>{n.scene.position.set(116577.28779765591,19632.646909285337,0),n.scene.rotateX(Math.PI/2),n.scene.scale.set(2,2,2),e.addObject(n.scene)})}let Ia;class S4 extends D.MxCADPluginBase{constructor(){super(),Ia&&Ia.isMxCADAppLib()||(this.map_default_data=J3())}}Ah(),MxPluginContext.on("databaseLayerUpdate",()=>{console.log("数据库图层数据更新")}),_i.MxFun.setloadImageFuction((e,t,n,l,c)=>{let d=!1;if(l&&typeof l=="string"&&l.length>0?(l=="tiff"||l=="tif")&&(d=!0):(e.slice(-4)=="tiff"||e.slice(-3)=="tif")&&(d=!0),d){d=!0;let f=new D.MxTIFFLoader;return f.setInverse(c),f.load(e,t,n),1}else return 0}),_i.MxFun.onInitSync(()=>new Promise(e=>{e(!0)})),_i.MxFun.on("mxcadApplicationStart",e=>{Ia=e,Ia.init(new S4)}),_i.MxFun.on("mxcadApplicationInitMap",()=>{Q3(Ia.mxmap)}),_i.MxFun.on("mxcadApplicationStartCreatingMxCADObject",e=>{let t=e.mxdraw;t.setViewMovementMethod(!0),t.on("openFileComplete",()=>{console.log("MxTip:openFileComplete ")}),t.addControlsEvent("mousedown",n=>{let l=n.offsetX,c=n.offsetY,d=t.viewCoord2Cad(l,c,0);return console.log("mousedown:",d),0})});const T4=e=>{let t,n;D.MxCpp.getCurrentMxCAD().on("selectChange",l=>{var d;if(l.length===0)return;const c=(d=l[0])==null?void 0:d.getMcDbEntity();if(c&&c instanceof D.McDbCustomEntity&&(t==null?void 0:t.getHandle())===c.getHandle()){const f=c.getTypeName();Fo.value=c.clone(),f==="McDbTestRoughness"?(ko.value="RoughnessDialog",co.showDialog(!0,{title:rt("表面粗糙度")}).then(x=>Ei(this,[x],function*({data:r,isCanceled:_}){var w;if(!_){const b=r.roughnessData,E=c.clone();E.rougMarkType=b.selectSymbolNum,E.textLeftStr=b.textLeftStr,E.rougCornerType=b.rougCornerType==="无"?"":b.rougCornerType,E.isRoungSameRequire=b.isRoungSameRequire,E.isShowMostSymbols=b.isShowMostSymbols;const P=(w=b.textUpStr)==null?void 0:w.filter(I=>I!="");E.textUpStr=JSON.parse(JSON.stringify(P)).reverse(),E.textDownStr=b.textDownStr.filter(I=>I!=""),E.isAddRougLongLine=b.isAddLongLine,c.erase(),e.drawEntity(E),e.mxdraw.clearMxCurrentSelect(),e.updateDisplay()}}))):f==="McDbTestWeldingSymbol"?(ko.value="WeldingSymbolDialog",co.showDialog(!0,{title:rt("焊接符号")}).then(x=>Ei(this,[x],function*({data:r,isCanceled:_}){if(!_){const w=r.formData,b=c;if(w.specialSymbol.length&&b.setSpecialSymbol(w.specialSymbol),w.rightDim1||w.rightDim2){const E=[nn.top,nn.down],P=[];E.forEach(I=>{const z=w.rightDim1.filter(q=>q.position===I)[0],k=w.rightDim2.filter(q=>q.position===I)[0],G=z.content&&k.content?"×":"";P.push({position:I,content:z.content+G+k.content})}),b.setRightDim(P)}b.setSuppleSymbol(w.suppleSymbol),b.setLeftDim(w.leftDim),b.setTopDim(w.topDim),b.setAuxiliarySymbol(w.auxiliarySymbol),b.setBaseSymbok(w.basicSymbol),b.setIntWeldSeam(w.intWeldSeam),b.dottedLinePos=w.dottedLinePos,b.weldingSymbolInfo=w.weldingSymbolInfo.replace(/\n/g,"\\P"),c.erase(),e.drawEntity(b),e.mxdraw.clearMxCurrentSelect(),e.updateDisplay()}}))):f==="MxDbGeometricTolerances"&&(ko.value="GemoetricToleranceDialog",co.showDialog(!0,{title:rt("形位公差")}).then(x=>Ei(this,[x],function*({data:r,isCanceled:_}){if(!_){const w=r.formData,b=c;b.dimToleranceContents=(w==null?void 0:w.dimToleranceContents)||[],b.isShowFullWeekSymbol=(w==null?void 0:w.isShowFull)||!1,b.dimNotesDown=(w==null?void 0:w.downDim)||"",b.dimNotesUp=(w==null?void 0:w.topDim)||"",c.erase(),e.drawEntity(b),e.mxdraw.clearMxCurrentSelect(),e.updateDisplay()}})))}t=c,n&&clearTimeout(n),n=setTimeout(()=>{t=null},300)})};_i.MxFun.on("mxcadApplicationCreatedMxCADObject",e=>{if(U4(),T4(e.mxcad),Ia.isMxCADAppLib())return;let t=Ia.getServerConfig();D.MxCpp.App.addNetworkLoadingFont(t.font||["txt.shx","simplex.shx","gdt.shx","aaa.shx","ltypeshp.shx","complex.shx"]),D.MxCpp.App.addNetworkLoadingBigFont(t.bigFont||["hztxt.shx","gbcbig.shx"]),t.trueTypeFont?D.MxCpp.App.addNetworkLoadingTrueTypeFont(t.trueTypeFont[0],t.trueTypeFont[1],t.trueTypeFont[2]):D.MxCpp.App.addNetworkLoadingTrueTypeFont(["syadobe"],["思原黑体"],["syadobe.otf"]);let n=e.mxcad;n.setAttribute({DisplayPrecision:35}),n.on("selectChange",l=>{if(console.log("selectChange"),l.length==0)return;let c=l[0],d=c.getMxDbEntity();if(d!==null){console.log(d.getTypeName()),d instanceof _i.MxDbRectBoxLeadComment&&console.log(d.text);return}let f=c.getMcDbEntity();f!==null&&(console.log(f.objectName),f instanceof D.McDbText?console.log(f.textString):f instanceof D.McDbBlockReference&&f.getAllAttribute().forEach(x=>{let w=x.getMcDbEntity();console.log(w.textString),console.log(w.tag)}))}),MxPluginContext.setCustomDataListLength(6),D.MxCpp.PropertiesWindow.onEvent_getProperties(l=>{let c=l.getMcDbEntity();if(!c)return[];let d=c.getxDataDouble("DN"),f=c.getxDataDouble("LEN"),r=[];return d.ret&&(r.push({sVarName:"DN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:d.val,isOnlyRead:!1}),r.push({sVarName:"DN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:d.val,isOnlyRead:!1}),r.push({sVarName:"DN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:d.val,isOnlyRead:!1})),f.ret&&(r.push({sVarName:"LEN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:f.val,isOnlyRead:!1}),r.push({sVarName:"LEN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:f.val,isOnlyRead:!1}),r.push({sVarName:"LEN",iVarType:D.MxPropertiesWindowCustomValueType.kDouble,val:f.val,isOnlyRead:!1})),r}),D.MxCpp.PropertiesWindow.onEvent_setProperties((l,c)=>{let d=l.getMcDbEntity();d&&(c.sVarName=="DN"?d.setxDataDouble("DN",c.val):c.sVarName=="LEN"&&d.setxDataDouble("LEN",c.val))})});function E4(){window.open("https://demo.mxdraw3d.com:3562/MxCADCode.7z")}function P4(){window.open("https://demo.mxdraw3d.com:3562/MxDrawCloudServer1.0TryVersion.7z")}function Su(e){var t=window.location.href;return t.indexOf("?")!=-1&&(t=t.replace(/(\?|#)[^'"]*/,"")),`${t}?map=true&maptype=${e}`}function C4(){window.open(Su("gdslwzj"))}function R4(){window.open(Su("google"))}function D4(){window.open(Su("gdyx"))}function L4(){window.open(Su("tdtsl"))}function I4(){window.open(Su("bdsl"))}function B4(){window.open(Su("geoq"))}function z4(){return Ei(this,null,function*(){})}function k4(){return Ei(this,null,function*(){const e=new D.MxCADUiPrPoint;e.setMessage(rt(" 指定一点:"));let t=yield e.go();if(!t)return;const n=new D.MxCADUiPrAngle;n.setMessage(rt("指定夹角")),n.setKeyWords(""),n.setBasePt(t);const l=yield n.go();console.log(l)})}function F4(){return Ei(this,null,function*(){let e=new D.MxCADUiPrEntity;e.setMessage("选择要需要开启自定义属性的对象");let t=yield e.go();if(!t.isValid())return;let n=t.getMcDbEntity();D.MxCpp.PropertiesWindow.setEntitySupportCustom(t),n.setxDataDouble("DN",100),n.setxDataDouble("LEN",2e3)})}function U4(){_i.MxFun.addCommand("Mx_Open_DemoCode",E4),_i.MxFun.addCommand("Mx_Open_DevInstall",P4),_i.MxFun.addCommand("Mx_Open_Map_gdslwzj",C4),_i.MxFun.addCommand("Mx_Open_Map_gdyx",D4),_i.MxFun.addCommand("Mx_Open_Map_tdtsl",L4),_i.MxFun.addCommand("Mx_Open_Map_bdsl",I4),_i.MxFun.addCommand("Mx_Open_Map_geoq",B4),_i.MxFun.addCommand("Mx_Open_Map_googlecn",R4),_i.MxFun.addCommand("Mx_Test_GetFile",z4),_i.MxFun.addCommand("MxTest_Map_Download",$3),_i.MxFun.addCommand("MxTemp_Test",k4),_i.MxFun.addCommand("Mx_TestExProp",F4),O3(),LM(),FM(),Ia.mxmap&&M4(_i.MxFun.getCurrentDraw())}const N4=Object.freeze(Object.defineProperty({__proto__:null,default:{718:"Specify the first point of the output range:",719:"Specify the second point of the output range:",720:"Specify the first point:",721:"Specify the second point:",722:"Cloud wireframe starting point:",723:"End point of cloud wireframe:",724:"Drawing review annotation points:",725:"Click to start drawing cloud lines:",726:"Click to end drawing cloud lines again:",727:"Specify one point:",728:"Specify two points:",729:"Select object",730:"Specify the next point:",731:"\\Specify insertion base point",732:"Specify table insertion point:",733:"Specify insertion point:",734:"Specify insertion base point",735:"Select annotation object",736:"Please select the target text",737:"Specify a point inside the filling area:",738:"No closed area found",739:"Surface roughness",740:"Welding symbol",741:"Positional tolerance",742:"Select the object that needs to enable custom properties",743:"Select the object to hide",744:"Specify insertion point:",745:"Specify one point:",746:"Specify the angle",747:"Specify two points:",748:"Select pattern fill object",749:"Specify the first point:",750:"Specify the second point:",751:"Specify the second angle point:",752:"Specify the last point:",753:"Specify coordinate point:",754:"Specify annotation points:",755:"Please provide your approval comments",756:"Specify the starting point of the cloud wireframe",757:"Specify the termination point of the cloud wireframe",758:"Designated review icon annotation points",759:"Specify the first corner point:",760:"Specify the second corner point:",761:"Specify serial number location:",762:"Rotations Symbols",763:"Tag type",764:"Please select the circle to be marked:",765:"Please set positioning points, lines, arcs, or circles",766:"Drag to determine the annotation position",767:"Please specify or enter an angle",768:"weld symbol",769:"Please pick a positioning point, line, or arc",770:"Please specify the second point",771:"Please set the positioning point",772:"Please set the angle",773:"Please set positioning points, lines, or arcs",774:"Please set the lead turning point",775:"Drag to determine the positioning point",776:"Please specify the first point:",777:"Please specify the second point:",778:"Please select the target block object",779:"Please enter a new block name",780:"Select the block that needs to modify the base point",781:"Set base point",782:"Select the block that requires color modification",783:"Enter color index (0~256)",784:"Please select the source block",785:"Select the target block to brush:",786:"Select connection method",787:"Manually connect each line one by one",788:"Automatic batch connection",789:"Please select the block for the connection",790:"Set centerline length",791:"Select the target block to rotate:",792:"Set rotation angle",793:"Please set the zoom ratio",794:"Please set the selection range:",795:"Please select the target block",796:"Please set the statistical scope",797:"Specify table insertion point:",798:"Select target curve",799:"Specify the length annotation point",800:"Select Target Object",801:"Please select the target slope object",802:"Please set the height of the annotation text",803:"Specify slope annotation point",804:"Please select the target coordinate point",805:"Please specify the annotation location",806:"Specify start point",807:"Specify the endpoint",808:"Specify annotation direction",809:"Please set the text content",810:"Please select the first point of the area",811:"Please select the next point",812:"Please select the location for area annotation",813:"Please select corner 1 of the rectangle",814:"Please select corner 2 of the rectangle",815:"Please set the location for area annotation",816:"Please select a measurement point",817:"Please select a straight line",818:"Please set the position of the dimension line",819:"Please select an arc",820:"Please specify the position of the dimension line",821:"Please select a circular object",822:"Please specify the text location",823:"Please select the endpoint or arc of the line",824:"Please specify the position of the text",825:"Please select a continuous measurement label",826:"Please select the second straight line",827:"Please set the position for angle annotation",828:"Please enter the number of star shaped vertices:",829:"Specify the star center point:",830:"Please set the inner radius of the star shape:",831:"Specify the outer radius of the star shape:",832:"Please enter the width of the concave convex line<5>",833:"Please enter the height of the concave convex line as<10>",834:"Please click to confirm the starting point",835:"Please click to confirm the endpoint",836:"Please enter zigzag width<5>",837:"Please enter zigzag line height<10>",838:"Please enter rectangle width<5>",839:"Please enter rectangle height<10>",840:"Please click to confirm the center of the rectangle",841:"Please enter pipe diameter<10>",842:"Please enter the length of the outlet pipe<5>",843:"Please click to confirm the starting point",844:"Specify the starting point of the pipeline section",845:"Specify the endpoint of the sectional pipeline",846:"Select the direction of the pipeline arc",847:"the left",848:"the right side",849:"MODE",850:"straight bead",851:"Arc weld seam",852:"Please enter weld radius<5>",853:"Specify the second point of the arc",854:"Specify end point of arc",855:"Please enter width<25>",856:"Please enter height<15>",857:"Please enter staircase level<10>",858:"Please confirm the center position of the circle",859:"Please enter the radius of the circle",860:"Please enter insulation cotton width<5>",861:"Please enter insulation cotton height<10>",862:"Please click on the next point",863:"Please select the first line",864:"Please select the second line",865:"Please select the endpoint",866:"Please select the target rectangle",867:"Set the center point of the compass",868:"Set the radius of the compass",869:"Select prompt box pointing",870:"Specify the first point of the message box:",871:"Specify the second point of the message box:",872:"Set the message box to point to:",873:"Please set the reference character text",874:"Please set the text height",875:"Please set the benchmark position",876:"Please set positioning points, arcs, or lines",877:"Please set the symbol position",878:"Please set the center of the circle",879:"Please set the center of the gear circle",880:"Please set the gear radius",881:"Please set the centerline length to 10>",882:"Please select the first circle",883:"Please select the second circle",884:"Please set the top left corner point of the rectangle",885:"Please set the bottom right corner point of the rectangle",886:"Please set the fillet radius",887:"Please select the starting point of the polygon",888:"Please select polygon vertices",889:"Select object:",890:"Specify base point",891:"Specify the second point",892:"array",893:"exit",894:"give up",895:"Enter the number of items to be arranged in the array",896:"Select arc object",897:"Choose to copy rotated objects:",898:"Please specify the target point",899:"Please specify the rotation angle",900:"Select the object to be converted into a polygon",901:"Set the number of polygon edges",902:"Input Options",903:"Internally connected to a circle",904:"Externally cut to a circle",905:"Select the object whose color you want to modify",906:"Enter color index",907:"hide",908:"Hide Unselected",909:"show all",910:"Select the target object",911:"Specify to delete the first point of the box:",912:"Specify to delete the second point of the box:",913:"Select the entity that needs to be precisely deleted",914:"Please select an angle to copy the object",915:"Please enter the angle for copying quantity",916:"Please enter the base point for copying the angle",917:"Please enter the copying angle",918:"Please select vertex object",919:"Please select the copied object",920:"Please confirm the replication base point",921:"Please select the reference curve",922:"Select interrupt object",923:"Specify offset object",924:"Please enter the offset distance",925:"Specify the scaling object (select lines, polylines, arcs)",926:"Stretching to",927:"Select the object to modify the line type scale",928:"Please enter the line type ratio",929:"Please enter the array spacing",930:"Please select an arc",931:"Select sorting objects",932:"Specify the arrangement base point",933:"Select target polyline:",934:"Please enter rounded corner radius<5>",935:"Select fill object",936:"Please enter the fill ratio",937:"Please select the original fill shape",938:"Please click to fill any point inside the graphic",939:"Please select a line object",940:"Select equal division mode",941:"measure",942:"Divide",943:"Offset equal division",944:"Copy equally",945:"Please select offset equal division objects",946:"Please select to copy equally divided objects",947:"Please select the line segments that need to be divided equally",948:"Please set equal distances",949:"Please set the number of equal parts",950:"Please set the offset distance",951:"Please specify the offset point",952:"Please specify the replication base point",953:"Please specify the number of equal parts to be copied",954:"Please specify the endpoints for copying and dividing equally",955:"Please select the entity that requires rectangular scaling:",956:"Please specify corner 1 of the rectangle",957:"Please specify corner 2 of the rectangle",958:"Please choose to zoom in on the center point",959:"Please select the zoom in range",960:"Please set the magnification factor",961:"Please choose to enlarge the insertion point",962:"Please select a curve that needs to be broken",963:"Please select a break point on the curve",964:"Please enter the number of arrays",965:"Do you want to enable rotation",966:"correct",967:"deny",968:"Please select the graphics that require an array:",969:"Please select the center point of the array",970:"Please select a closed polygon!",971:"Please select the first point",972:"Please select the second point",973:"Please select the first closed polygon",974:"Please select the second closed polygon",975:"Please select two closed polygons",976:"Two polygons do not have overlapping edges!",977:"Please select the target polygon",978:"Please select the edges of the polygon to add vertices to",979:"Please set the position of the added vertices",980:"Please select the vertices of the polygon that need to be deleted",981:"Please select the edges of the polygon that need to be stretched",982:"Please specify the stretching position",983:"Please set the orientation of the frame to<N>",984:"horizontal",985:"longitudinal",986:"Please set the frame size to<4>",987:"Please set the position of the frame",988:"Specify cutting corner 1",989:"Specify cutting corner point 2",990:"Please set the starting point of the road",991:"Please set the next point",992:"Please select the target alignment line object (choose a line)",993:"Please select the target text object",994:"Select Text Object",995:"Please set the font height",996:"Please set the word width",997:"Please select the source text",998:"Please select the first text",999:"Please select the second text",1e3:"Please select the text that needs to be aligned",1001:"Please choose the alignment method",1002:"the left side",1003:"centre",1004:"the right side",1005:"Please select the alignment base point",1006:"Please select the text that needs to be reversed",1007:"Please select the text that needs to be filled with spaces",1008:"Please select a text object",1009:"Please enter underline width",1010:"Please set the underline distance",1011:"Please set an underline to extend the distance",1012:"Please select the operation option",1013:"capital letters",1014:"lowercase",1015:"sentence case ",1016:"Please select a numerical object",1017:"Please select a text insertion point",1018:"Select the scope to search for:",1019:"Please select the search mode",1020:"equal to",1021:"contain",1022:"The prefix is",1023:"The suffix is",1024:"Please enter keywords",1025:"Select the scope of operation:",1026:"Select operation mode",1027:"add",1028:"delete",1029:"Select operation location",1030:"prefix",1031:"suffix",1032:"Please enter the content",1033:"Please select text",1034:"Please select an arc",1035:"Please choose a text style",1036:"Please set the text extraction range",1037:"Download and open the demo code",1038:"Download development kit",1039:"Call the command to draw circular lines",1040:"Interactive drawing of straight lines",1041:"Add Layer",1042:"Get all layers",1043:"Get all text styles",1044:"Obtain all image blocks",1045:"Get all line types",1046:"Write extended data",1047:"Read extended data",1048:"Test inserting a block",1049:"Draw a straight line",1050:"arc ",1051:"circle",1052:"Draw PL line",1053:"Draw Fill",1054:"emoji",1055:"Draw an ellipse",1056:"Draw elliptical arcs",1057:"Draw multiline text",1058:"TABLE",1059:"Draw QR code",1060:"Insert stamp",1061:"Get all objects",1062:"Interactive selection of objects",1063:"Save MXWeb to the server",1064:"Obtain system variables",1065:"new sheet",1066:"White background color",1067:"Text search and positioning",1068:"Select entity to make blocks",1069:"Draw single line text",1070:"Select point filling",1071:"Set extended attributes",1072:"Draw alignment annotations",1073:"Drawing line annotation",1074:"angular",1075:"Modify object line type",1076:"Select hidden object layer",1077:"Add to current selection",1078:"Visual rotation",1079:"Write extension records",1080:"Get a Naming Dictionary",1081:"Add Text Style",1082:"Draw custom entities",1083:"Modify object color",1084:"The modified object is not visible",1085:"Modify object layer",1086:"Modify the display order of objects",1087:"Output PDF within the specified range",1088:"Draw an image",1089:"Read object extension dictionary",1090:"Draw 3D Polyline",1091:"Custom entity for line drawing text",1092:"Calculate intersection point",1093:"Modify Text Style",1094:"Offset input line drawing",1095:"Create Group",1096:"Screenshot JPG",1097:"Obtain the same text as the drawing",1098:"Specify the output range as dwg",1099:"Test drawing marker circle",1100:"Test Wipeout",1101:"create cutouts",1102:"Tolerance marking",1103:"Change all object colors",1104:"Cutting MXWeb",1105:"Set the current color line weight",1106:"Search for objects within a polygonal region",1107:"Smash objects",1108:"Draw semi transparent lines",1109:"Add line type",1110:"Modify the proportion of the pattern",1111:"Test Text Editing",1112:"Draw barcode",1113:"Screenshot BMP",1114:"Modify Tools",1115:"text tool",1116:"Drawing tools",1117:"Block Tool",1118:"Instrument",1119:"Annotation tool",1120:"Other tools",1121:"Multiple replication",1122:"Arc to Circle",1123:"Copy Rotation",1124:"Circular to Multilateral",1125:"Change color",1126:"Arc angle cutting",1127:"Temporary Hide",1128:"Box deletion",1129:"Angle copying",1130:"Vertex Copy",1131:"Intersection point interruption",1132:"double offset",1133:"Change the size of the circle",1134:"Linetype Scale",1135:"Telescoping",1136:"By arc array",1137:"PL rounded corner",1138:"PL line reverse",1139:"Obtain all linear objects",1140:"equal division",1141:"Rectangular scaling",1142:"interrupt",1143:"Cutting polygons",1144:"Merging Polygons",1145:"Add polygon vertices",1146:"Delete polygon vertices",1147:"Unilateral stretching of polygons",1148:"star shape",1149:"Concave convex line",1150:"jagged lines",1151:"Center rectangle",1152:"rounded rectangle",1153:"Circular centerline",1154:"pipe",1155:"Pipe cutting symbol",1156:"perpendicular bisector",1157:"staircase",1158:"solid circle",1159:"Thermal insulation cotton",1160:"Centerline",1161:"Opening a hole",1162:"message box",1163:"Reference symbol (1)",1164:"weld line",1165:"concentric circles",1166:"gear",1167:"Block centerline",1168:"Circular tangent line",1169:"Reference symbol (2)",1170:"Insert frame",1171:"Draw roads",1172:"Draw any polygon",1173:"Align by line",1174:"Change the font height",1175:"Change the width of the characters",1176:"Brush content",1177:"Change content",1178:"justified",1179:"Align up and down",1180:"Text reversal",1181:"Text framing",1182:"underline",1183:"Title line",1184:"case",1185:"Sum of numbers",1186:"Select specific characters",1187:"affix",1188:"Connecting Text",1189:"Delete space",1190:"Vertical Text",1191:"Align by arc",1192:"Modify global text style",1193:"Extract Text",1194:"Text number",1195:"Change the block name",1196:"Brush block",1197:"Block Connection",1198:"Change the base point of the block",1199:"Change the color of the block",1200:"Multi block rotation",1201:"Multi block scaling",1202:"Brush block angle",1203:"Select by block",1204:"Select all by block",1205:"Statistics of individual blocks",1206:"Count multiple blocks",1207:"Modify block layer",1208:"length",1209:"Statistical area",1210:"Intelligent elevation",1211:"area",1212:"Rectangular area",1213:"distance from point to line",1214:"arc length",1215:"Measuring Circle",1216:"CONTINUE",1217:"View segment length",1218:"Area including arc",1219:"Drawing review annotation",1220:"Rectangular annotation",1221:"Roughness annotation",1222:"Coordinate annotation",1223:"Slope marking",1224:"alignment",1225:"enlarge",1226:"Number annotation",1227:"Rotate annotation",1228:"Circular hole marking",1229:"Directional symbol",1230:"Radiographic annotation",1231:"Rectangular annotation hovering color change",1232:"Crop drawing extension",1233:"Arrow line",1234:"Selected Text",1235:"Clipboard",1236:"cancel",1237:"sure",1238:"Tolerance code",1239:"Tolerance 1",1240:"Tolerance 2",1241:"annotations",1242:"top",1243:"bottom",1244:"reference",1245:"Full week symbol",1246:"Current line",1247:"Add Row",1248:"delete row",1249:"zero clearing",1250:"Straightness",1251:"Flatness",1252:"roundness",1253:"Cylindricity",1254:"Line Profile",1255:"Profile of a Surface",1256:"parallelism",1257:"verticality",1258:"tilt",1259:"Positional accuracy",1260:"Coaxiality",1261:"Symmetry",1262:"runout",1263:"total runout",1264:"clean up",1265:"Please enter the text content and number:",1266:"Text content:",1267:"(Enter 0-20 words)",1268:"Starting number:",1269:"(Number automatically increases by 1)",1270:"Number location:",1271:"Number before",1272:"Number after",1273:"change direction",1274:"Left text content:",1275:"Text content on the right:",1276:"Bottom text content:",1277:"Basic symbols",1278:"Same requirements",1279:"Most symbols",1280:"Add a horizontal line to the long side",1281:"auxiliary symbol",1282:"Supplementary symbols",1283:"Symbol position",1284:"Special symbols",1285:"Left size",1286:"Up size",1287:"Right size",1288:"Staggered weld",1289:"spacing",1290:"extended text ",1291:"Dashed line position",1292:"Welding instructions",1293:"Clear rows",1294:"flange weld",1295:"Type I weld seam",1296:"V-shaped weld seam",1297:"Unilateral V-shaped weld seam",1298:"Single sided steep side V-shaped groove welding",1299:"Tilted weld seam",1300:"Removable pad",1301:"Durable pad",1302:"V-type weld with rounded edge",1303:"U-shaped weld with rounded edge",1304:"Single sided V-shaped weld with a stop edge",1305:"Single sided U-shaped weld with a stop edge",1306:"Edge weld",1307:"Welding joint",1308:"sealing bead",1309:"fillet weld",1310:"Plug weld or groove weld",1311:"spotweld",1312:"Folding interface",1313:"Tilt interface",1314:"Spot weld seam (offset center)",1315:"Weld seam",1316:"Weld seam (off center)",1317:"Steep side V-shaped groove welding",1318:"The first type of planar symbol",1319:"The second concave symbol",1320:"The second type of convex symbol",1321:"The second type of planar symbol",1322:"The first convex symbol",1323:"The third type of planar symbol",1324:"The first concave symbol",1325:"Flatten the weld seam",1326:"Smooth transition at the toe",1327:"With pad symbol",1328:"Three sided weld symbol",1329:"Surrounding welding symbols",1330:"On site symbols",1331:"tail symbol",1332:"Interleaved intermittent welding symbol",1333:"Horn shaped weld seam",1334:"Unilateral horn shaped weld seam",1335:"Weld seam",1336:"Lock edge weld seam",1337:"Locking edge groove",1338:"upper",1339:"below",1340:"not have",1341:"basicSymbol",1342:"auxiliarySymbol",1343:"suppleSymbol",1344:"specialSymbol",1345:"Select the weld symbol to be placed on the geometric shape",1346:"Welding angle width:",1347:"Unilateral V-shaped butt weld (front view)",1348:"Corner weld seam (front view)",1349:"Unilateral V-shaped butt weld (side view)",1350:"Corner weld seam (side view)",1985:"Extract Table",1996:"Please input the table to extract accuracy",1997:"Select the first corner of the extraction range",1998:"Select the second corner of the extraction range",1999:"No valid table recognized!",2e3:"Please test in the local environment!",2001:"Online editing of tables",2019:"Enter the number text",2020:"Please select a single line of text",2021:"Please select a multi line text",2022:"Please set the text insertion point",2023:"Please select single line text",2024:"Multiple single to multiple conversion",2025:"Single to multiple conversion",2026:"Convert multiple orders",2027:"Convert multiple single orders"}},Symbol.toStringTag,{value:"Module"})),V4=Object.freeze(Object.defineProperty({__proto__:null,default:{718:"출력 범위의 첫 번째 점을 지정합니다.",719:"출력 범위의 두 번째 점을 지정합니다.",720:"첫 번째 점을 지정합니다.",721:"두 번째 점 지정:",722:"클라우드 와이어프레임 시작점:",723:"클라우드 와이어프레임 끝점:",724:"심사 아이콘 참고 사항:",725:"클릭하여 구름선을 그리기 시작:",726:"다시 클릭하여 클라우드 그리기를 끝냅니다.",727:"점 지정:",728:"두 점 지정:",729:"객체 선택",730:"다음 점을 지정합니다.",731:"\\ 삽입 기준점 지정",732:"테이블 삽입점을 지정하려면 다음과 같이 하십시오.",733:"삽입점을 지정하려면 다음과 같이 하십시오.",734:"삽입 기준점 지정",735:"치수 객체 선택",736:"대상 텍스트 선택",737:"채우기 영역 내부의 점을 지정합니다.",738:"닫힌 영역을 찾을 수 없음",739:"표면 거친도",740:"용접 기호",741:"비트 공차",742:"사용자 정의 속성을 설정할 객체 선택",743:"숨길 객체 선택",744:"삽입점을 지정하려면 다음과 같이 하십시오.",745:"점 지정:",746:"각도 지정",747:"두 점 지정:",748:"해치 객체 선택",749:"첫 번째 점을 지정합니다.",750:"두 번째 점 지정:",751:"두 번째 각도를 지정합니다.",752:"마지막 점을 지정합니다.",753:"좌표점을 지정합니다.",754:"치수 점을 지정하려면 다음과 같이 하십시오.",755:"승인 의견을 입력하십시오.",756:"클라우드 와이어프레임 시작점 지정",757:"클라우드 와이어프레임 끝점 지정",758:"심사 아이콘 주석 지정",759:"첫 번째 구석을 지정합니다.",760:"두 번째 구석 지정:",761:"일련번호 위치를 지정하려면 다음과 같이 하십시오.",762:"회전 기호",763:"태그 유형",764:"태그가 필요한 원을 선택하십시오.",765:"위치 점 또는 선 또는 호 또는 원을 설정하십시오.",766:"드래그하여 치수 위치 결정",767:"각도를 지정하거나 입력하십시오.",768:"용접 기호",769:"위치 점, 선 또는 호를 선택하십시오.",770:"두 번째 점을 지정하십시오.",771:"위치 점을 설정하십시오.",772:"각도를 설정하십시오.",773:"위치 점이나 선 또는 호를 설정하십시오.",774:"지시선 전환점을 설정하십시오.",775:"드래그하여 위치 점 결정",776:"첫 번째 점을 지정하십시오.",777:"두 번째 점을 지정하십시오.",778:"대상 블록 객체를 선택하십시오.",779:"새 블록 이름을 입력하십시오.",780:"기준점을 수정할 블록 선택",781:"기준점 설정",782:"색상을 수정할 블록 선택",783:"색상 색인 입력 (0~256)",784:"소스 블록을 선택하십시오.",785:"브러시할 대상 블록 선택:",786:"연결 방법 선택",787:"수동으로 하나씩 연결",788:"자동 대량 연결",789:"연결된 블록을 선택하십시오.",790:"중심선 길이 설정",791:"회전할 대상 블록을 선택합니다.",792:"회전 각도 설정",793:"배율을 설정하십시오.",794:"선택 범위를 설정하십시오.",795:"대상 블록을 선택하십시오.",796:"통계 범위를 설정하십시오.",797:"테이블 삽입점을 지정하려면 다음과 같이 하십시오.",798:"대상 커브 선택",799:"길이 치수 점 지정",800:"대상 객체 선택",801:"대상 기울기 객체를 선택하십시오.",802:"치수 문자 높이를 설정하십시오.",803:"기울기 치수 점 지정",804:"대상 좌표점을 선택하십시오.",805:"치수 위치를 지정하십시오.",806:"시작점 지정",807:"끝점 지정",808:"치수 방향 지정",809:"텍스트 내용을 설정하십시오.",810:"영역의 첫 번째 점을 선택하십시오.",811:"다음 점을 선택하십시오.",812:"영역 치수의 위치를 선택하십시오.",813:"사각형의 구석 1을 선택하십시오.",814:"사각형의 구석 2 를 선택하십시오.",815:"영역 치수의 위치를 설정하십시오.",816:"측정 점을 선택하십시오.",817:"선을 선택하십시오.",818:"치수 선의 위치를 설정하십시오.",819:"호선을 선택하십시오.",820:"치수 선 위치를 지정하십시오.",821:"원 객체를 선택하십시오.",822:"문자 위치를 지정하십시오.",823:"선의 끝점이나 호를 선택하십시오.",824:"문자의 위치를 지정하십시오.",825:"연속 측정을 위한 치수를 선택하십시오.",826:"두 번째 선을 선택하십시오.",827:"각도 치수의 위치를 설정하십시오.",828:"별 꼭대기 점 수를 입력하십시오.",829:"별의 중심점을 지정하려면:",830:"별의 내부 반지름을 설정하십시오.",831:"별의 외부 반지름을 지정합니다.",832:"범프 선 너비를 입력하십시오<5>",833:"범프 선 높이를 입력하십시오<10>",834:"시작점을 확인하려면 클릭하십시오.",835:"클릭하여 결승점을 확정하세요",836:"앤티앨리어싱 너비를 입력하십시오<5>",837:"앤티앨리어싱 높이 입력<10>",838:"직사각형 너비 입력<5>",839:"직사각형 높이 입력<10>",840:"클릭하여 사각형 중심 확인",841:"파이프 지름을 입력하십시오<10>",842:"파이프 배출구 길이를 입력하십시오<5>",843:"클릭하여 시작점 확인",844:"횡단면 파이프라인 시작점 지정하기",845:"횡단면 파이프라인 끝점 지정하기",846:"횡단면 파이프라인 호 방향 선택",847:"왼쪽",848:"오른쪽",849:"선택 모드",850:"선 용접",851:"아크 용접",852:"용접 반지름을 입력하십시오<5>",853:"호의 두 번째 점 지정하기",854:"호의 끝점 지정하기",855:"폭을 입력하십시오<25>",856:"높이를 입력하십시오<15>",857:"계단 레벨을 입력하십시오<10>",858:"중심 위치를 확인하십시오.",859:"원 반지름을 입력하십시오.",860:"보온면 너비 입력<5>",861:"보온면 높이 입력<10>",862:"다음 점 눌러주세요.",863:"첫 번째 선을 선택하십시오.",864:"두 번째 선을 선택하십시오.",865:"끝점을 선택하십시오.",866:"대상 사각형을 선택하십시오.",867:"나침반 중심점 설정",868:"나침반 반지름 설정",869:"프롬프트 상자 가리키기 선택",870:"메시지 상자의 첫 번째 점을 지정합니다.",871:"메시지 상자의 두 번째 점을 지정합니다.",872:"메시지 상자 방향을 설정하려면 다음과 같이 하십시오.",873:"데이텀 문자 설정하기",874:"문자 높이를 설정하십시오.",875:"데이텀 문자 위치를 설정하십시오.",876:"위치 점이나 호 또는 선을 설정하십시오.",877:"기호 위치를 설정하십시오.",878:"중심점을 설정하십시오.",879:"기어 중심을 설정하십시오.",880:"기어 반지름을 설정하십시오.",881:"중심선 길이 10 설정 >",882:"첫 번째 원을 선택하십시오.",883:"두 번째 원을 선택하십시오.",884:"직사각형의 왼쪽 위 구석을 설정하십시오.",885:"직사각형의 오른쪽 아래 구석을 설정하십시오.",886:"필렛 반지름을 설정하십시오.",887:"다각형 시작점을 선택하십시오.",888:"다각형 교점을 선택하십시오.",889:"객체 선택:",890:"기준점 지정",891:"두 번째 점 지정",892:"어레이",893:"종료",894:"포기",895:"패턴화할 항목 수 입력",896:"호 객체 선택",897:"회전된 객체 복사를 선택합니다.",898:"대상 점을 지정하십시오.",899:"회전 각도를 지정하십시오.",900:"다각형으로 변환할 객체 선택",901:"다각형 모서리 수 설정",902:"입력 옵션",903:"내접 원",904:"원에 외부 탄젠트",905:"색상을 수정할 객체 선택",906:"색상 색인 입력",907:"숨기기",908:"선택 안 함 숨기기",909:"모두 표시",910:"대상의 객체 선택",911:"상자의 첫 번째 점을 삭제하도록 지정합니다.",912:"상자 두 번째 점을 삭제하도록 지정합니다.",913:"정확하게 삭제할 엔티티 선택",914:"각도를 선택하여 객체를 복사합니다.",915:"각도 복사 수량을 입력하십시오.",916:"각도 복사의 기준점을 입력하십시오.",917:"복사 각도를 입력하십시오.",918:"정점 객체를 선택하십시오.",919:"객체 복사를 선택하십시오.",920:"복제 기준점을 확인하십시오.",921:"참조 커브 선택",922:"끊기 객체 선택",923:"오프셋 객체 지정",924:"오프셋 거리를 입력하십시오.",925:"신축 객체 지정 (선, 폴리선, 호 선택)",926:"다음으로 확장",927:"선종류 축척을 수정할 객체 선택",928:"선종류 축척을 입력하십시오.",929:"패턴 간격을 입력하십시오.",930:"호를 선택하십시오.",931:"정렬 객체 선택",932:"정렬 기준점 지정",933:"대상 폴리선을 선택합니다.",934:"필렛 반지름을 입력하십시오<5>",935:"채우기 객체 선택",936:"채우기 축척을 입력하십시오.",937:"원래 채우기 도면을 선택하십시오.",938:"도면 내부의 아무 곳이나 채우려면 클릭하십시오.",939:"선 객체 선택",940:"등분 모드 선택",941:"정거 등분",942:"정수 등분",943:"오프셋 등분",944:"등분 복사",945:"동등한 객체 간격띄우기를 선택하십시오.",946:"등분 객체 복사를 선택하십시오.",947:"등분할 세그먼트를 선택하십시오.",948:"등분 거리를 설정하십시오.",949:"등분 수량을 설정하십시오",950:"오프셋 거리를 설정하십시오.",951:"오프셋 점을 지정하십시오.",952:"복사 기준점을 지정하십시오.",953:"복사 등분 수량을 지정하십시오.",954:"복사 등분 끝점을 지정하십시오.",955:"사각형 배율이 필요한 엔티티를 선택하십시오.",956:"사각형의 구석 1 을 지정하십시오.",957:"사각형 구석 2를 지정하십시오.",958:"중심점 확대 선택",959:"확대 범위를 선택하십시오.",960:"확대 배수를 설정하십시오.",961:"삽입점 확대 를 선택하십시오.",962:"끊을 커브를 선택하십시오.",963:"커브에서 브레이크 점을 선택하십시오.",964:"패턴 수를 입력하십시오.",965:"회전 켜기",966:"예",967:"아니오",968:"배열이 필요한 도면을 선택하십시오.",969:"스토리지 중심점을 선택하십시오.",970:"닫힌 다각형을 선택하십시오!",971:"첫 번째 점을 선택하십시오.",972:"두 번째 점을 선택하십시오.",973:"첫 번째 닫힌 다각형을 선택하십시오.",974:"두 번째 닫힌 다각형을 선택하십시오.",975:"닫힌 다각형 두 개를 선택하십시오.",976:"두 다각형은 겹치는 모서리가 없습니다!",977:"대상 다각형을 선택하십시오.",978:"정점을 추가할 다각형 모서리를 선택하십시오.",979:"추가할 정점 위치를 설정하십시오.",980:"다각형에서 삭제할 정점을 선택하십시오.",981:"다각형으로 밀어낼 모서리를 선택하십시오.",982:"밀어내기 위치를 지정하십시오.",983:"그림 상자 방향을 설정하십시오<N>",984:"가로",985:"세로",986:"액자 크기를 설정하십시오<4>",987:"프레임 위치를 설정하십시오.",988:"트림 각도 점 1 지정",989:"트림된 구석 2 지정",990:"도로 시작점을 설치하세요",991:"다음 점을 설정하십시오.",992:"대상 정렬선 객체 (선 선택) 를 선택하십시오.",993:"대상 문자 객체를 선택하십시오.",994:"문자 객체 선택",995:"높이를 설정하십시오.",996:"글자 폭을 설정하십시오.",997:"원본 텍스트를 선택하십시오.",998:"첫 번째 텍스트를 선택하십시오.",999:"두 번째 텍스트를 선택하십시오.",1e3:"정렬할 문자를 선택하십시오.",1001:"정렬을 선택하십시오.",1002:"왼쪽",1003:"가운데",1004:"오른쪽",1005:"기준점 정렬을 선택하십시오.",1006:"반전할 텍스트를 선택하십시오.",1007:"공백을 제거할 텍스트를 선택하십시오.",1008:"문자 객체를 선택하십시오.",1009:"밑줄 너비를 입력하십시오.",1010:"밑줄 거리를 설정하십시오.",1011:"밑줄 연장 거리를 설정하십시오.",1012:"작업 옵션을 선택하십시오.",1013:"대문자",1014:"소문자",1015:"문장의 첫머리와 대문자.",1016:"디지털 객체를 선택하십시오.",1017:"텍스트 삽입점을 선택하십시오.",1018:"찾을 범위를 선택합니다.",1019:"찾기 모드를 선택하십시오.",1020:"같음",1021:"포함",1022:"접두사는",1023:"접미어는",1024:"키워드를 입력하십시오.",1025:"작업할 범위를 선택합니다.",1026:"작업 방법 선택",1027:"추가",1028:"삭제",1029:"작업 위치 선택",1030:"접두사",1031:"접미어",1032:"내용을 입력하십시오.",1033:"텍스트 선택",1034:"호를 선택하십시오.",1035:"문자 스타일을 선택하십시오.",1036:"텍스트 추출 범위를 설정하십시오.",1037:"오픈 데모 코드 다운로드",1038:"개발 패키지 다운로드",1039:"원선 그리기 명령 호출",1040:"서로 직선을 그리다",1041:"도면층 추가",1042:"모든 도면층 가져오기",1043:"모든 문자 스타일 가져오기",1044:"모든 그림 블록 가져오기",1045:"모든 선 모양 가져오기",1046:"확장 데이터 쓰기",1047:"확장 데이터 읽기",1048:"그림 블록 삽입 테스트",1049:"선을 그리다",1050:"호 그리기",1051:"원을 그리다",1052:"PL 선 그리기",1053:"채우기 그리기",1054:"드로잉 문자",1055:"타원 그리기",1056:"타원형 호를 그리다",1057:"여러 줄 문자 그리기",1058:"테이블 그리기",1059:"QR코드 그리기",1060:"도장 삽입",1061:"모든 객체 가져오기",1062:"상호 객체 선택",1063:"서버에 mxweb 저장",1064:"시스템 변수 가져오기",1065:"새 시트",1066:"흰색 배경색",1067:"텍스트 찾기 위치",1068:"블록으로 솔리드 선택",1069:"단일행 문자 그리기",1070:"선택 채우기",1071:"확장 속성 설정",1072:"정렬 치수 그리기",1073:"회선 치수",1074:"각도 치수",1075:"객체 선종류 수정",1076:"숨겨진 객체 레이어 선택",1077:"현재 선택에 추가",1078:"뷰포트 회전",1079:"확장 레코드 쓰기",1080:"명명 사전 얻기",1081:"문자 스타일 추가",1082:"사용자 솔리드 그리기",1083:"객체 색상 수정",1084:"수정 개체가 보이지 않음",1085:"객체 레이어 수정",1086:"객체 표시 순서 수정",1087:"범위 지정 출력 pdf",1088:"이미지 그리기",1089:"객체 확장 사전 읽기",1090:"3DPolyline 그리기",1091:"선 그리기 텍스트 사용자화 솔리드",1092:"계산 교차점",1093:"문자 스타일 수정",1094:"오프셋 입력 선",1095:"그룹 만들기",1096:"스크린샷 jpg",1097:"시트 동일 문자 가져오기",1098:"범위 출력 dwg 지정",1099:"표식 원 그리기 테스트",1100:"Wipeout 테스트",1101:"잘라낸 블록 생성하기",1102:"공차 치수",1103:"모든 객체 색상 변경",1104:"자르기 mxweb",1105:"현재 색상 선 무게 설정",1106:"다각형 영역 내의 객체 찾기",1107:"객체 깨기",1108:"반투명 선 그리기",1109:"선 유형 추가",1110:"패턴 축척 수정하기",1111:"텍스트 편집 테스트",1112:"바코드 그리기",1113:"스크린샷 bmp",1114:"수정 도구",1115:"문자 도구",1116:"드로잉 도구",1117:"블록 도구",1118:"측정 도구",1119:"치수 도구",1120:"기타 도구",1121:"다중 복제",1122:"호전원",1123:"복사 회전",1124:"원형 다각형",1125:"색상 수정",1126:"호 탄젠트",1127:"임시 숨기기",1128:"상자 삭제",1129:"각도 복사",1130:"정점 복사",1131:"교점이 끊어지다",1132:"양방향 오프셋",1133:"원 크기 변경",1134:"선종류 축척",1135:"신축",1136:"호별 패턴",1137:"pl 필렛",1138:"pl선 대칭 이동",1139:"모든 선 객체 가져오기",1140:"등분",1141:"직사각형 크기 조절",1142:"끊다",1143:"다각형 가공하기",1144:"다각형 결합",1145:"다각형 교점 추가",1146:"다각형 교점 삭제",1147:"다각형 단일 밀어내기",1148:"별 모양",1149:"범프 선",1150:"톱니 선",1151:"중심 사각형",1152:"필렛 사각형",1153:"원 중심선",1154:"파이프",1155:"단면부",1156:"중수선",1157:"계단",1158:"채워진 원",1159:"보온면",1160:"중심선",1161:"구멍을 내다",1162:"메시지 상자",1163:"데이텀 문자 (1)",1164:"용접선",1165:"동심원",1166:"기어",1167:"블록 중심선",1168:"원형 공접선",1169:"데이텀 문자 (2)",1170:"그림 상자 삽입",1171:"도로를 그리다",1172:"다각형 그리기",1173:"선으로 정렬",1174:"고자질",1175:"글자의 폭을 바꾸다",1176:"내용 스밍",1177:"내용을 바꾸다",1178:"좌우 정렬",1179:"위아래 정렬",1180:"문자 반전",1181:"텍스트 상자",1182:"밑줄",1183:"도명선",1184:"대소문자",1185:"숫자 구화",1186:"특정 단어 선택",1187:"접미어",1188:"연결 문자",1189:"공백 제거",1190:"문자 세로 방향",1191:"호별 정렬",1192:"전역 문자 스타일 수정",1193:"텍스트 추출",1194:"문자 번호",1195:"블록 이름 변경",1196:"브러시",1197:"블록 연결",1198:"블록 기준점을 변경하다.",1199:"블록 색상 변경",1200:"다중 블록 회전",1201:"다중 블록 크기 조절",1202:"브러시 각도",1203:"블록별 선택",1204:"블록별로 모두 선택",1205:"통계 단일 블록",1206:"다중 블록 통계",1207:"블록 도면층 수정",1208:"길이",1209:"통계 면적",1210:"지능형 높이",1211:"면적",1212:"직사각형 영역",1213:"점에서 선까지의 거리",1214:"호 길이",1215:"원 측정",1216:"연속 측정",1217:"세그먼트 길이 보기",1218:"영역 포함 호",1219:"심도 치수",1220:"직사각형 치수",1221:"조잡도 치수",1222:"좌표 치수",1223:"슬로프",1224:"정렬",1225:"부분 확대",1226:"일련번호 마크업",1227:"치수 회전",1228:"둥근 구멍 표식",1229:"방향 기호",1230:"방사선 치수",1231:"직사각형 치수 고정 변색",1232:"용지 확장 트림",1233:"화살표 선",1234:"선택한 텍스트",1235:"클립보드로 복사",1236:"취소",1237:"확인",1238:"공차 코드",1239:"공차 1",1240:"공차 2",1241:"부주",1242:"꼭대기",1243:"밑단",1244:"기준",1245:"전주기호",1246:"현재 행",1247:"행 추가",1248:"행 삭제",1249:"제로",1250:"직선도",1251:"평면도",1252:"원도",1253:"원통도",1254:"선 프로파일",1255:"면 프로파일",1256:"평행도",1257:"수직도",1258:"경사도",1259:"위치도",1260:"동축도",1261:"대칭도",1262:"둥글게 뛰다",1263:"올댄스",1264:"지우기",1265:"텍스트 내용 및 번호를 입력하십시오.",1266:"텍스트 내용:",1267:"(0-20자 입력)",1268:"시작 번호:",1269:"(번호 자동 증가 1)",1270:"번호 지정 위치:",1271:"번호 이전",1272:"번호 뒤에",1273:"방향 변경",1274:"왼쪽 텍스트 내용:",1275:"오른쪽 텍스트 내용:",1276:"아래 텍스트 내용:",1277:"기본 기호",1278:"동일 요구 사항",1279:"다수 기호",1280:"긴 모서리 가로줄",1281:"보조 기호",1282:"보충 기호",1283:"기호 위치",1284:"특수 기호",1285:"왼쪽 치수",1286:"위 치수",1287:"오른쪽 치수",1288:"교차 용접",1289:"간격",1290:"텍스트 확장",1291:"점선 위치",1292:"용접 설명",1293:"행 지우기",1294:"볼륨 모서리 용접",1295:"유형 I 용접",1296:"V 용접",1297:"단일 V 용접",1298:"한면 급경사 V 그루브 스택",1299:"용접 기울이기",1300:"분리식 패드",1301:"영구 패드",1302:"리턴 모서리 V 용접",1303:"리턴 모서리 U 용접",1304:"리턴 모서리 단일 V 용접",1305:"리턴 모서리 단일 U 용접",1306:"끝 용접",1307:"스택 용접 커넥터",1308:"커버 용접",1309:"필렛 용접",1310:"플러그 또는 슬롯 용접",1311:"점 용접",1312:"인터페이스 축소",1313:"기울기 커넥터",1314:"점 용접 (가운데 오프셋)",1315:"용접",1316:"용접 (중심 이탈)",1317:"가파른 V 그루브 스택",1318:"첫 번째 평면 기호",1319:"두 번째 오목 기호",1320:"두 번째 볼록 기호",1321:"두 번째 평면 기호",1322:"첫 번째 볼록 기호",1323:"세 번째 평면 기호",1324:"첫 번째 오목 기호",1325:"용접 깎기",1326:"발가락 부드럽게 변환",1327:"개스킷 기호 포함",1328:"3면 용접 기호",1329:"주변 용접 문자",1330:"필드 기호",1331:"꼬리 기호",1332:"인터레이스 띄엄필렛 용접 기호",1333:"플레어 용접",1334:"단일 플레어 용접",1335:"더미 용접",1336:"자물쇠 모서리 용접",1337:"모서리 그루브 잠금",1338:"위",1339:"하",1340:"없음",1341:"basicSymbol",1342:"auxiliarySymbol",1343:"suppleSymbol",1344:"specialSymbol",1345:"형상에 배치할 용접 기호 선택",1346:"용접 각도 너비:",1347:"단일 V 버트 용접(전면)",1348:"필렛 용접 (전면)",1349:"단일 V 버트 용접 (측면 뷰)",1350:"필렛 용접 (측면 뷰)",1985:"테이블 추출",1996:"테이블 추출 정밀도를 입력하십시오.",1997:"추출 범위의 첫 번째 구석 선택",1998:"추출 범위의 두 번째 구석 선택",1999:"유효한 양식이 인식되지 않았습니다!",2e3:"로컬 환경에서 테스트하십시오!",2001:"온라인으로 테이블 편집",2019:"번호 문자 입력",2020:"한 줄 텍스트를 선택하십시오.",2021:"여러 줄 텍스트를 선택하십시오.",2022:"문자 삽입점을 설정하십시오.",2023:"단일행 텍스트 선택",2024:"많이 돌리다",2025:"단일 회전 다중",2026:"다중 회전 다중 시트",2027:"다중 회전 단일"}},Symbol.toStringTag,{value:"Module"})),O4=Object.freeze(Object.defineProperty({__proto__:null,default:{718:"指定輸出範圍第一點：",719:"指定輸出範圍第二點：",720:"指定第一點：",721:"指定第二點：",722:"雲線框起始點：",723:"雲線框結束點：",724:"審圖標注點：",725:"點擊開啟繪製雲線：",726:"再次點擊結束繪製雲線：",727:"指定一點：",728:"指定二點：",729:"選擇對象",730:"指定下一個點：",731:"\\指定插入基點",732:"指定表格插入點：",733:"指定插入點：",734:"指定插入基點",735:"選擇標注對象",736:"請選擇目標文字",737:"指定填充區域內部一點：",738:"沒有找到閉合區域",739:"表面粗糙度",740:"焊接符號",741:"形位公差",742:"選擇要需要開啟自訂屬性的對象",743:"選擇要隱藏的對象",744:"指定插入點：",745:"指定一點：",746:"指定夾角",747:"指定二點：",748:"選擇圖案填充對象",749:"指定第一點：",750:"指定第二點：",751:"指定第二個角度點：",752:"指定最後一個點：",753:"指定座標點：",754:"指定標注點：",755:"請輸入審批意見",756:"指定雲線框起始點",757:"指定雲線框終止點",758:"指定審圖標注點",759:"指定第一個角點：",760:"指定第二個角點：",761:"指定序號位置：",762:"旋轉符號",763:"標記類型",764:"請選擇需要標記的圓：",765:"請設定定位點或直線或圓弧或圓",766:"拖動確定標注位置",767:"請指定或輸入角度",768:"焊縫符號",769:"請拾取定位點、直線或圓弧",770:"請指定第二點",771:"請設定定位點",772:"請設定角度",773:"請設定定位點或直線或圓弧",774:"請設定引線轉捩點",775:"拖動確定定位點",776:"請指定第一點：",777:"請指定第二點：",778:"請選擇目標塊對象",779:"請輸入新塊名",780:"選擇需要修改基點的塊",781:"設定基點",782:"選擇需要修改顏色的塊",783:"輸入顏色索引(0~256)",784:"請選擇源塊",785:"選擇要刷的目標塊：",786:"選擇連接管道",787:"手動逐個連線",788:"自動批量連線",789:"請選擇連線的塊",790:"設定中心線長度",791:"選擇要旋轉的目標塊：",792:"設定旋轉角度",793:"請設定縮放比例",794:"請設定選擇範圍：",795:"請選擇目標塊",796:"請設定統計範圍",797:"指定表格插入點：",798:"選擇目標曲線",799:"指定長度標注點",800:"選擇目標對象",801:"請選擇目標斜率對象",802:"請設定標注文字高度",803:"指定斜率標注點",804:"請選擇目標座標點",805:"請指定標注位置",806:"指定起點",807:"指定終點",808:"指定標注方向",809:"請設定文字內容",810:"請選擇面積的第一個點",811:"請選擇下一個點",812:"請選擇面積標注的位置",813:"請選擇矩形的角點1",814:"請選擇矩形的角點2",815:"請設定面積標注的位置",816:"請選擇一個量測點",817:"請選擇一條直線",818:"請設定尺寸線的位置",819:"請選擇一條弧線",820:"請指定尺寸線位置",821:"請選擇一個圓對象",822:"請指定文字位置",823:"請選擇直線的端點或弧線",824:"請指定文字的位置",825:"請選擇一個連續量測的標注",826:"請選擇第二條直線",827:"請設定角度標注的位置",828:"請輸入星形頂點數：",829:"指定星形中心點：",830:"請設定星形的內半徑：",831:"指定星形的外半徑：",832:"請輸入凹凸線寬度<5>",833:"請輸入凹凸線高度<10>",834:"請點擊確定起始點",835:"請點擊確定終點",836:"請輸入鋸齒線寬度<5>",837:"請輸入鋸齒線高度<10>",838:"請輸入矩形寬度<5>",839:"請輸入矩形高度<10>",840:"請點擊確定矩形中心",841:"請輸入管徑<10>",842:"請輸入長出管口長度<5>",843:"請點擊確定起點",844:"指定剖管線起點",845:"指定剖管線終點",846:"選擇剖管線圓弧方向",847:"左邊",848:"右邊",849:"選擇模式",850:"直線焊縫",851:"弧線焊縫",852:"請輸入焊縫半徑<5>",853:"指定圓弧的第二個點",854:"指定圓弧的端點",855:"請輸入寬度<25>",856:"請輸入高度<15>",857:"請輸入樓梯級數<10>",858:"請確定圓心位置",859:"請輸入圓半徑",860:"請輸入保溫棉寬度<5>",861:"請輸入保溫棉高度<10>",862:"請點擊下一個點",863:"請選擇第一條線",864:"請選擇第二條線",865:"請選擇終點",866:"請選擇目標矩形",867:"設定指北針中心點",868:"設定指北針半徑",869:"選擇提示框指向",870:"指定訊息方塊第一點：",871:"指定訊息方塊第二點：",872:"設定訊息方塊指向：",873:"請設定基準符文字",874:"請設定文字高度",875:"請設定基準符位置",876:"請設定定位點或圓弧或直線",877:"請設定符號位置",878:"請設定圓心",879:"請設定齒輪圓心",880:"請設定齒輪半徑",881:"請設定中心線長度10>",882:"請選擇第一個圓",883:"請選擇第二個圓",884:"請設定矩形左上角點",885:"請設定矩形右下角點",886:"請設定圓角半徑",887:"請選擇多邊形起點",888:"請選擇多邊形頂點",889:"選擇對象：",890:"指定基點",891:"指定第二個點",892:"陣列",893:"退出",894:"放弃",895:"輸入要進行陣列的項目數",896:"選擇圓弧對象",897:"選擇複製旋轉對象：",898:"請指定目標點",899:"請指定旋轉角度",900:"選擇要轉成多邊形的對象",901:"設定多邊形邊數",902:"輸入選項",903:"內接於圓",904:"外切於圓",905:"選擇要修改顏色的對象",906:"輸入顏色索引",907:"隱藏",908:"隱藏未選",909:"全部顯示",910:"選擇目標的對象",911:"指定删除方框第一點：",912:"指定删除方框第二點：",913:"選擇需要精確删除的實體",914:"請選擇角度複製對象",915:"請輸入角度複製數量",916:"請輸入角度複製的基點",917:"請輸入複製角度",918:"請選擇頂點對象",919:"請選擇複製對象",920:"請確定複製基點",921:"請選擇參攷曲線",922:"選擇打斷對象",923:"指定偏移對象",924:"請輸入偏移距離",925:"指定伸縮對象(選擇直線、多段線、圓弧)",926:"伸縮至",927:"選擇要修改線型比例的對象",928:"請輸入線型比例",929:"請輸入陣列間距",930:"請選擇圓弧",931:"選擇排列對象",932:"指定排列基點",933:"選擇目標多段線：",934:"請輸入圓角半徑<5>",935:"選擇填充對象",936:"請輸入填充比例",937:"請選擇原填充圖形",938:"請點擊填充圖形內部任意一點",939:"請選擇線對象",940:"選擇等分模式",941:"定距等分",942:"定數等分",943:"偏移等分",944:"複製等分",945:"請選擇偏移等分對象",946:"請選擇複製等分對象",947:"請選擇需要等分的線段",948:"請設定等分距離",949:"請設定等分的數量",950:"請設定偏移距離",951:"請指定偏移點",952:"請指定複製基點",953:"請指定複製等分數量",954:"請指定複製等分端點",955:"請選擇需要矩形縮放的實體：",956:"請指定矩形的角點1",957:"請指定矩形角點2",958:"請選擇放大中心點",959:"請選擇放大範圍",960:"請設定放大倍數",961:"請選擇放大插入點",962:"請選擇一條需要打斷的曲線",963:"請在曲線上選取打斷點",964:"請輸入陣列數量",965:"是否開啟旋轉",966:"是",967:"否",968:"請選擇需要陣列的圖形：",969:"請選擇陣列中心點",970:"請選擇閉合多邊形！",971:"請選擇第一個點",972:"請選擇第二個點",973:"請選擇第一個閉合多邊形",974:"請選擇第二個閉合多邊形",975:"請選擇兩個閉合多邊形",976:"兩個多邊形沒有重合邊！",977:"請選擇目標多邊形",978:"請選擇多邊形需要添加頂點的邊",979:"請設定添加的頂點位置",980:"請選擇多邊形需要删除的頂點",981:"請選擇多邊形需要拉伸的邊",982:"請指定拉伸位置",983:"請設定圖框方向<N>",984:"橫向",985:"縱向",986:"請設定圖框尺寸<4>",987:"請設定圖框位置",988:"指定裁剪角點1",989:"指定裁剪角點2",990:"請設定道路起點",991:"請設定下一點",992:"請選擇目標對齊線對象(選擇直線)",993:"請選擇目標文字對象",994:"選擇文字對象",995:"請設定字高",996:"請設定字寬",997:"請選擇源文字",998:"請選擇第一個文字",999:"請選擇第二個文字",1e3:"請選擇需要對齊的文字",1001:"請選擇對齊管道",1002:"左",1003:"中",1004:"右",1005:"請選擇對齊基點",1006:"請選擇需要反轉的文字",1007:"請選擇需要去空格的文字",1008:"請選擇文字對象",1009:"請輸入底線寬度",1010:"請設定底線距離",1011:"請設定底線延長距離",1012:"請選擇操作選項",1013:"大寫",1014:"小寫",1015:"句首大寫",1016:"請選擇數位對象",1017:"請選擇文字插入點",1018:"選擇要查找的範圍：",1019:"請選擇查找模式",1020:"等於",1021:"包含",1022:"首碼為",1023:"尾碼為",1024:"請輸入關鍵字",1025:"選擇要操作的範圍：",1026:"選擇操作管道",1027:"添加",1028:"删除",1029:"選擇操作位置",1030:"首碼",1031:"尾碼",1032:"請輸入內容",1033:"請選擇文字",1034:"請選擇圓弧",1035:"請選擇文字樣式",1036:"請設定文字選取範圍",1037:"下載開Demo程式碼",1038:"下載開發包",1039:"調用畫圓線命令",1040:"互動畫直線",1041:"添加圖層",1042:"得到所有圖層",1043:"得到所有文字樣式",1044:"得到所有圖塊",1045:"得到所有線型",1046:"寫擴展數據",1047:"讀擴展數據",1048:"測試插入一個圖塊",1049:"繪直線",1050:"繪圓弧",1051:"繪圓",1052:"繪PL線",1053:"繪填充",1054:"繪文字",1055:"繪橢圓",1056:"繪橢圓弧",1057:"繪製多行文字",1058:"繪製表格",1059:"繪製二維碼",1060:"插入圖章",1061:"得到所有對象",1062:"互動選擇對象",1063:"保存mxweb到服務器",1064:"得到系統變數",1065:"新建圖紙",1066:"白色背景色",1067:"文字查找定位",1068:"選擇實體做塊",1069:"繪製單行文字",1070:"選點填充",1071:"設定擴展内容",1072:"繪製對齊標注",1073:"繪性線標注",1074:"角度標注",1075:"修改對象線型",1076:"選擇隱藏對象層",1077:"添加到當前選擇",1078:"視區旋轉",1079:"寫擴展記錄",1080:"得到命名字典",1081:"添加文字樣式",1082:"繪自定義實體",1083:"修改對象顏色",1084:"修改對象不可見",1085:"修改對象層",1086:"修改對象顯示順序",1087:"指定範圍輸出pdf",1088:"繪製image",1089:"讀取對象擴展字典",1090:"繪製3DPolyline",1091:"繪線文字自定義實體",1092:"計算交點",1093:"修改文字樣式",1094:"偏移輸入畫線",1095:"創建組",1096:"螢幕截圖jpg",1097:"獲取圖紙相同文字",1098:"指定範圍輸出dwg",1099:"測試繪製標記圓",1100:"測試Wipeout",1101:"創建剪切塊",1102:"公差標注",1103:"改所有對象顏色",1104:"切剪mxweb",1105:"設定當前顏色線重",1106:"查找多邊形區域內對象",1107:"打碎對象",1108:"繪半透明線",1109:"添加線型",1110:"修改圖案比例",1111:"測試文字編輯",1112:"繪製條碼",1113:"螢幕截圖bmp",1114:"修改工具",1115:"文字工具",1116:"繪圖工具",1117:"塊工具",1118:"量測工具",1119:"標注工具",1120:"其他工具",1121:"多重複製",1122:"弧轉圓",1123:"複製旋轉",1124:"圓轉多邊",1125:"修改顏色",1126:"圓弧切角",1127:"臨時隱藏",1128:"方框删除",1129:"角度複製",1130:"頂點複製",1131:"交點打斷",1132:"雙向偏移",1133:"改圓大小",1134:"線型比例",1135:"伸縮",1136:"按弧陣列",1137:"pl圓角",1138:"pl線反向",1139:"得到所有直線對象",1140:"等分",1141:"矩形縮放",1142:"打斷",1143:"切割多邊形",1144:"合併多邊形",1145:"添加多邊形頂點",1146:"删除多邊形頂點",1147:"多邊形單邊拉伸",1148:"星形",1149:"凹凸線",1150:"鋸齒線",1151:"中心矩形",1152:"圓角矩形",1153:"圓中心線",1154:"筦道",1155:"剖管符",1156:"中垂線",1157:"樓梯",1158:"實心圓",1159:"保溫棉",1160:"中心線",1161:"開洞",1162:"訊息方塊",1163:"基準符(1)",1164:"焊縫線",1165:"同心圓",1166:"齒輪",1167:"塊中心線",1168:"圓公切線",1169:"基準符(2)",1170:"插入圖框",1171:"繪製道路",1172:"繪任意多邊形",1173:"按線對齊",1174:"改字高",1175:"改字寬",1176:"刷內容",1177:"換內容",1178:"左右對齊",1179:"上下對齊",1180:"文字反轉",1181:"文字加框",1182:"底線",1183:"圖名線",1184:"大小寫",1185:"數位求和",1186:"選特定字",1187:"前尾碼",1188:"連接文字",1189:"去空格",1190:"文字豎向",1191:"按弧對齊",1192:"修改全域文字樣式",1193:"選取文字",1194:"文字編號",1195:"改塊名",1196:"刷塊",1197:"塊連線",1198:"改塊基點",1199:"改塊顏色",1200:"多塊旋轉",1201:"多塊縮放",1202:"刷塊角度",1203:"按塊選擇",1204:"按塊全選",1205:"統計單塊",1206:"統計多塊",1207:"修改塊圖層",1208:"長度",1209:"統計面積",1210:"智慧標高",1211:"面積",1212:"矩形面積",1213:"點到直線的距離",1214:"弧長",1215:"量測圓",1216:"連續量測",1217:"查看分段長度",1218:"面積含弧線",1219:"審圖標注",1220:"矩形標注",1221:"粗糙度標注",1222:"座標標注",1223:"標斜率",1224:"對齊",1225:"局部放大",1226:"序號標注",1227:"旋轉標注",1228:"圓孔標記",1229:"向視符號",1230:"射線標注",1231:"矩形標注懸停變色",1232:"裁剪圖紙擴展",1233:"箭頭直線",1234:"選擇的文字",1235:"複製到剪貼板",1236:"取消",1237:"確定",1238:"公差代號",1239:"公差1",1240:"公差2",1241:"附注",1242:"頂端",1243:"底端",1244:"基準",1245:"全周符號",1246:"當前行",1247:"新增行",1248:"删除行",1249:"清零",1250:"直線度",1251:"平面度",1252:"圓度",1253:"圓柱度",1254:"線輪廓度",1255:"面輪廓度",1256:"平行度",1257:"垂直度",1258:"傾斜度",1259:"位置度",1260:"同軸度",1261:"對稱度",1262:"圓跳動",1263:"全跳動",1264:"清除",1265:"請輸入文字內容和編號：",1266:"文字內容：",1267:"(輸入0-20個字)",1268:"起始編號：",1269:"(編號自動遞增1)",1270:"編號位置：",1271:"編號在前",1272:"編號在後",1273:"改變方向",1274:"左邊文字內容：",1275:"右邊文字內容：",1276:"底部文字內容：",1277:"基本符號",1278:"相同要求",1279:"多數符號",1280:"長邊加橫線",1281:"輔助符號",1282:"補充符號",1283:"符號位置",1284:"特殊符號",1285:"左尺寸",1286:"上尺寸",1287:"右尺寸",1288:"交錯焊縫",1289:"間距",1290:"擴充文字",1291:"虛線位置",1292:"焊接說明",1293:"清除行",1294:"卷邊焊縫",1295:"I型焊縫",1296:"V型焊縫",1297:"單邊V型焊縫",1298:"單邊陡側V型坡口堆焊",1299:"傾斜焊縫",1300:"可移除襯墊",1301:"持久襯墊",1302:"帶頓邊V型焊縫",1303:"帶頓邊U型焊縫",1304:"帶頓邊單邊V型焊縫",1305:"帶頓邊單邊U型焊縫",1306:"端接焊縫",1307:"堆焊接頭",1308:"封底焊縫",1309:"角焊縫",1310:"塞焊縫或槽焊縫",1311:"點焊縫",1312:"折疊介面",1313:"傾斜介面",1314:"點焊縫(偏移中心)",1315:"縫焊縫",1316:"縫焊縫(偏離中心)",1317:"陡側V型坡口堆焊",1318:"第一種平面符號",1319:"第二種凹面符號",1320:"第二種凸面符號",1321:"第二種平面符號",1322:"第一種凸面符號",1323:"第三種平面符號",1324:"第一種凹面符號",1325:"削平焊縫",1326:"趾部平滑過渡",1327:"帶墊板符號",1328:"三面焊縫符號",1329:"周圍焊接符",1330:"現場符號",1331:"尾部符號",1332:"交錯斷續焊接符號",1333:"喇叭形焊縫",1334:"單邊喇叭形焊縫",1335:"堆焊縫",1336:"鎖邊焊縫",1337:"鎖邊坡口",1338:"上",1339:"下",1340:"無",1341:"basicSymbol",1342:"auxiliarySymbol",1343:"suppleSymbol",1344:"specialSymbol",1345:"選擇要在幾何圖形上放置的焊縫符號",1346:"焊角寬度：",1347:"單邊V型對接焊縫(前視圖)",1348:"角焊縫(前視圖)",1349:"單邊V型對接焊縫(側視圖)",1350:"角焊縫(側視圖)",1985:"選取表格",1996:"請輸入表格選取精度",1997:"選擇選取範圍第一個角點",1998:"選擇選取範圍第二個角點",1999:"未識別到有效表格！",2e3:"請在本地環境測試！",2001:"線上編輯表格",2019:"輸入編號文字",2020:"請選擇一個單行文字",2021:"請選擇一個多行文字",2022:"請設定文字插入點",2023:"請選擇單行文字",2024:"多單轉一多",2025:"單轉多",2026:"多轉多個單",2027:"多轉單個單"}},Symbol.toStringTag,{value:"Module"}))})(Mx,MxCAD,MXCADAPP_EXTERNALLIBRARIES.Vue,MXCADAPP_EXTERNALLIBRARIES.vuetifyComponents,MXCADAPP_EXTERNALLIBRARIES.axios);
 //# sourceMappingURL=test.js.map

package/dist/mxdraw.d.ts

@@ -1220,7 +1220,7 @@ declare module "mxdraw" {
        * ``` typescript
        * ```
        */
-      setloadImageFuction(call: (url: string, onLoad?: (texture: any) => void, onError?: (event: any) => void) => void): void;
+      setloadImageFuction(call: (url: string, onLoad?: (texture: any) => void, onError?: (event: any) => void, fileType?: string, isTifInverse?: boolean) => void): void;
       /**
        * MxFun 模块
        * mxdraw模块初始化同步
@@ -2429,7 +2429,7 @@ declare module "mxdraw" {
        *
        * ```
        */
-      getMxCurrentSelect(): Array<number>;
+      getMxCurrentSelect(whenEmptyReturnPrvSelect?: boolean): Array<number>;
       /**
        * 得到图上当前选择的MxCAD对象.
        * @returns Array<number> 返回对象的id数组.
@@ -2439,7 +2439,7 @@ declare module "mxdraw" {
        *
        * ```
        */
-      getMxCADCurrentSelect(): Array<number>;
+      getMxCADCurrentSelect(whenEmptyReturnPrvSelect?: boolean): Array<number>;
       /**
        * 得到图上当前选择对象时，选择范围点.
        * @example