mslxdff 0.1.203 → 0.1.208

package/src/providers/raccoon/qr-codewords.js

@@ -1,115 +1,115 @@
-// raccoon 二维码编码的「码字层」：byte 模式位流 → RS 纠错 → 块切分与交错。
-// 只覆盖 byte 模式与版本 1–10（v10-M 容量 213 字节，够装下扫码登录 URL）。
-// 纠错级固定为 M（约 15% 冗余）——终端字符画本身易被拍照角度影响，M 是稳妥档。
-const DATA_CODEWORDS = [0, 16, 28, 44, 64, 86, 108, 124, 154, 182, 216];
-
-/** 纠错级 M 的块结构（QR 规范表）：每块 ecPerBlock 个纠错码字 + 若干 [块数, 每块数据码字]。 */
-const EC_BLOCKS_M = [
-  null,
-  { ecPerBlock: 10, groups: [[1, 16]] },
-  { ecPerBlock: 16, groups: [[1, 28]] },
-  { ecPerBlock: 26, groups: [[1, 44]] },
-  { ecPerBlock: 18, groups: [[2, 32]] },
-  { ecPerBlock: 24, groups: [[2, 43]] },
-  { ecPerBlock: 16, groups: [[4, 27]] },
-  { ecPerBlock: 18, groups: [[4, 31]] },
-  { ecPerBlock: 22, groups: [[2, 38], [2, 39]] },
-  { ecPerBlock: 22, groups: [[3, 36], [2, 37]] },
-  { ecPerBlock: 26, groups: [[4, 43], [1, 44]] },
-];
-
-const GF_EXP = new Uint8Array(512);
-const GF_LOG = new Uint8Array(256);
-(() => {
-  let x = 1;
-  for (let i = 0; i < 255; i++) {
-    GF_EXP[i] = x;
-    GF_LOG[x] = i;
-    x <<= 1;
-    if (x & 0x100) x ^= 0x11d; // 本原多项式 x^8+x^4+x^3+x^2+1
-  }
-  for (let i = 255; i < 512; i++) GF_EXP[i] = GF_EXP[i - 255];
-})();
-
-const gfMul = (a, b) => (a === 0 || b === 0 ? 0 : GF_EXP[GF_LOG[a] + GF_LOG[b]]);
-
-function polyMul(a, b) {
-  const out = new Array(a.length + b.length - 1).fill(0);
-  for (let i = 0; i < a.length; i++) for (let j = 0; j < b.length; j++) out[i + j] ^= gfMul(a[i], b[j]);
-  return out;
-}
-
-/** 生成多项式连乘 (x - α^0)…(x - α^(ecCount-1))，再做多项式除法取余数即纠错码字。 */
-function rsEncode(data, ecCount) {
-  const gen = qrEcGeneratorPoly(ecCount);
-  // qrEcGeneratorPoly 定义在文件末尾（函数声明提升，调用点在前无妨）
-  const buf = [...data, ...new Array(ecCount).fill(0)];
-  for (let i = 0; i < data.length; i++) {
-    const coef = buf[i];
-    if (coef === 0) continue;
-    for (let j = 0; j < gen.length; j++) buf[i + j] ^= gfMul(gen[j], coef);
-  }
-  return buf.slice(data.length);
-}
-
-/** 选能装下 byteLength 字节的最小版本；超出 v10 容量返回 undefined。 */
-export function pickQrVersion(byteLength) {
-  for (let version = 1; version <= 10; version++) {
-    const capacityBits = DATA_CODEWORDS[version] * 8;
-    const overheadBits = 4 + (version <= 9 ? 8 : 16); // 模式指示符 + 字符计数
-    if (overheadBits + byteLength * 8 <= capacityBits) return version;
-  }
-  return undefined;
-}
-
-/**
- * byte 模式位流 → 最终码字序列（数据块与纠错块按规范交错）。
- * 位流 = 0100（byte 模式）+ 字符计数 + 数据字节 + 终止符 + 字节对齐 + 0xEC/0x11 补齐。
- */
-export function buildQrCodewords(bytes, version) {
-  const blocks = EC_BLOCKS_M[version];
-  if (!blocks) throw new Error(`不支持的二维码版本 ${version}`);
-  const capacityBits = DATA_CODEWORDS[version] * 8;
-  const bits = [];
-  const pushBits = (value, length) => {
-    for (let i = length - 1; i >= 0; i--) bits.push((value >> i) & 1);
-  };
-  pushBits(4, 4);
-  pushBits(bytes.length, version <= 9 ? 8 : 16);
-  for (const byte of bytes) pushBits(byte, 8);
-  pushBits(0, Math.min(4, capacityBits - bits.length));
-  while (bits.length % 8 !== 0) bits.push(0);
-  for (let i = 0; bits.length < capacityBits; i++) pushBits([0xec, 0x11][i % 2], 8);
-
-  const dataCodewords = [];
-  for (let i = 0; i < bits.length; i += 8) {
-    let byte = 0;
-    for (let j = 0; j < 8; j++) byte = (byte << 1) | bits[i + j];
-    dataCodewords.push(byte);
-  }
-
-  const dataBlocks = [];
-  const ecBlocks = [];
-  let offset = 0;
-  for (const [count, perBlock] of blocks.groups) {
-    for (let b = 0; b < count; b++) {
-      const block = dataCodewords.slice(offset, offset + perBlock);
-      offset += perBlock;
-      dataBlocks.push(block);
-      ecBlocks.push(rsEncode(block, blocks.ecPerBlock));
-    }
-  }
-
-  const out = [];
-  const maxDataLen = Math.max(...dataBlocks.map((b) => b.length));
-  for (let i = 0; i < maxDataLen; i++) for (const block of dataBlocks) if (i < block.length) out.push(block[i]);
-  for (let i = 0; i < blocks.ecPerBlock; i++) for (const block of ecBlocks) out.push(block[i]);
-  return out;
-}
-
-/** 纠错生成多项式系数（QR 规范定义）。导出供单测用已知向量锚定 GF 运算。 */
-export function qrEcGeneratorPoly(degree) {
-  let gen = [1];
-  for (let i = 0; i < degree; i++) gen = polyMul(gen, [1, GF_EXP[i]]);
-  return gen;
-}
+// raccoon 二维码编码的「码字层」：byte 模式位流 → RS 纠错 → 块切分与交错。
+// 只覆盖 byte 模式与版本 1–10（v10-M 容量 213 字节，够装下扫码登录 URL）。
+// 纠错级固定为 M（约 15% 冗余）——终端字符画本身易被拍照角度影响，M 是稳妥档。
+const DATA_CODEWORDS = [0, 16, 28, 44, 64, 86, 108, 124, 154, 182, 216];
+
+/** 纠错级 M 的块结构（QR 规范表）：每块 ecPerBlock 个纠错码字 + 若干 [块数, 每块数据码字]。 */
+const EC_BLOCKS_M = [
+  null,
+  { ecPerBlock: 10, groups: [[1, 16]] },
+  { ecPerBlock: 16, groups: [[1, 28]] },
+  { ecPerBlock: 26, groups: [[1, 44]] },
+  { ecPerBlock: 18, groups: [[2, 32]] },
+  { ecPerBlock: 24, groups: [[2, 43]] },
+  { ecPerBlock: 16, groups: [[4, 27]] },
+  { ecPerBlock: 18, groups: [[4, 31]] },
+  { ecPerBlock: 22, groups: [[2, 38], [2, 39]] },
+  { ecPerBlock: 22, groups: [[3, 36], [2, 37]] },
+  { ecPerBlock: 26, groups: [[4, 43], [1, 44]] },
+];
+
+const GF_EXP = new Uint8Array(512);
+const GF_LOG = new Uint8Array(256);
+(() => {
+  let x = 1;
+  for (let i = 0; i < 255; i++) {
+    GF_EXP[i] = x;
+    GF_LOG[x] = i;
+    x <<= 1;
+    if (x & 0x100) x ^= 0x11d; // 本原多项式 x^8+x^4+x^3+x^2+1
+  }
+  for (let i = 255; i < 512; i++) GF_EXP[i] = GF_EXP[i - 255];
+})();
+
+const gfMul = (a, b) => (a === 0 || b === 0 ? 0 : GF_EXP[GF_LOG[a] + GF_LOG[b]]);
+
+function polyMul(a, b) {
+  const out = new Array(a.length + b.length - 1).fill(0);
+  for (let i = 0; i < a.length; i++) for (let j = 0; j < b.length; j++) out[i + j] ^= gfMul(a[i], b[j]);
+  return out;
+}
+
+/** 生成多项式连乘 (x - α^0)…(x - α^(ecCount-1))，再做多项式除法取余数即纠错码字。 */
+function rsEncode(data, ecCount) {
+  const gen = qrEcGeneratorPoly(ecCount);
+  // qrEcGeneratorPoly 定义在文件末尾（函数声明提升，调用点在前无妨）
+  const buf = [...data, ...new Array(ecCount).fill(0)];
+  for (let i = 0; i < data.length; i++) {
+    const coef = buf[i];
+    if (coef === 0) continue;
+    for (let j = 0; j < gen.length; j++) buf[i + j] ^= gfMul(gen[j], coef);
+  }
+  return buf.slice(data.length);
+}
+
+/** 选能装下 byteLength 字节的最小版本；超出 v10 容量返回 undefined。 */
+export function pickQrVersion(byteLength) {
+  for (let version = 1; version <= 10; version++) {
+    const capacityBits = DATA_CODEWORDS[version] * 8;
+    const overheadBits = 4 + (version <= 9 ? 8 : 16); // 模式指示符 + 字符计数
+    if (overheadBits + byteLength * 8 <= capacityBits) return version;
+  }
+  return undefined;
+}
+
+/**
+ * byte 模式位流 → 最终码字序列（数据块与纠错块按规范交错）。
+ * 位流 = 0100（byte 模式）+ 字符计数 + 数据字节 + 终止符 + 字节对齐 + 0xEC/0x11 补齐。
+ */
+export function buildQrCodewords(bytes, version) {
+  const blocks = EC_BLOCKS_M[version];
+  if (!blocks) throw new Error(`不支持的二维码版本 ${version}`);
+  const capacityBits = DATA_CODEWORDS[version] * 8;
+  const bits = [];
+  const pushBits = (value, length) => {
+    for (let i = length - 1; i >= 0; i--) bits.push((value >> i) & 1);
+  };
+  pushBits(4, 4);
+  pushBits(bytes.length, version <= 9 ? 8 : 16);
+  for (const byte of bytes) pushBits(byte, 8);
+  pushBits(0, Math.min(4, capacityBits - bits.length));
+  while (bits.length % 8 !== 0) bits.push(0);
+  for (let i = 0; bits.length < capacityBits; i++) pushBits([0xec, 0x11][i % 2], 8);
+
+  const dataCodewords = [];
+  for (let i = 0; i < bits.length; i += 8) {
+    let byte = 0;
+    for (let j = 0; j < 8; j++) byte = (byte << 1) | bits[i + j];
+    dataCodewords.push(byte);
+  }
+
+  const dataBlocks = [];
+  const ecBlocks = [];
+  let offset = 0;
+  for (const [count, perBlock] of blocks.groups) {
+    for (let b = 0; b < count; b++) {
+      const block = dataCodewords.slice(offset, offset + perBlock);
+      offset += perBlock;
+      dataBlocks.push(block);
+      ecBlocks.push(rsEncode(block, blocks.ecPerBlock));
+    }
+  }
+
+  const out = [];
+  const maxDataLen = Math.max(...dataBlocks.map((b) => b.length));
+  for (let i = 0; i < maxDataLen; i++) for (const block of dataBlocks) if (i < block.length) out.push(block[i]);
+  for (let i = 0; i < blocks.ecPerBlock; i++) for (const block of ecBlocks) out.push(block[i]);
+  return out;
+}
+
+/** 纠错生成多项式系数（QR 规范定义）。导出供单测用已知向量锚定 GF 运算。 */
+export function qrEcGeneratorPoly(degree) {
+  let gen = [1];
+  for (let i = 0; i < degree; i++) gen = polyMul(gen, [1, GF_EXP[i]]);
+  return gen;
+}