mslxdff 0.1.203 → 0.1.207

package/src/v6pool/claim.js

@@ -1,157 +1,157 @@
-// v6pool · 让内核接受池里的源地址（bind 直用 / ip addr add 认领）+ 认领账 + 释放。
-//
-// 两条路（Linux 上 bind() 一个没分配给本机的源地址会直接 EADDRNOTAVAIL）：
-//   bind：net.ipv6.ip_nonlocal_bind=1 ⇒ 直接 bind 任意地址，**不碰网卡**（首选，零副作用）；
-//   add ：ip -6 addr add <addr>/128 dev <iface> nodad ⇒ 加进网卡（需 root）。
-//
-// 为什么要记账（本轮手工实测的教训）：加进网卡的地址会改变内核的**默认源地址选择**——
-// 我在 A 机上留了两个临时地址，结果不带 --interface 的请求也走了新地址（生产机上这是事故）。
-// 所以：每次 add/del 都落 `<dir>/claimed.json`（0600、非工作树）；close 时全部释放；
-// 启动时按这份账清上一代残留（崩溃 / 被 SIGKILL 时 close 跑不到）。
-import { chmodSync, mkdirSync, readFileSync, writeFileSync } from "node:fs";
-import { join } from "node:path";
-import { execFile, execFileSync } from "node:child_process";
-import { fmtClaim, fmtClaimFail, fmtSweep } from "./report.js";
-
-export const CLAIM_FILE = "claimed.json";
-
-/** 默认执行器：失败时把 stderr 原文带进 Error（不许把 stderr 吞掉——否则只剩「失败了」）。 */
-export function defaultExec(file, args, { timeoutMs = 10_000 } = {}) {
-  return new Promise((resolve, reject) => {
-    execFile(file, args, { timeout: timeoutMs }, (err, stdout, stderr) => {
-      if (err) {
-        const e = new Error(`${file} ${args.join(" ")} 失败：${String(stderr || err.message || "").trim()}`);
-        e.code = err.code;
-        e.stderr = String(stderr || "");
-        reject(e);
-        return;
-      }
-      resolve({ stdout: String(stdout || ""), stderr: String(stderr || "") });
-    });
-  });
-}
-
-/** 退出钩子专用（同步）：`process.on("exit")` 里跑不了 async，但地址必须清。 */
-export function defaultExecSync(file, args, { timeoutMs = 10_000 } = {}) {
-  execFileSync(file, args, { timeout: timeoutMs, stdio: "ignore" });
-}
-
-/** 幂等判据：`ip addr add` 报 File exists = 已经在网卡上了，不算失败。 */
-export function isAlreadyThere(e) {
-  return /File exists|already assigned/i.test(String(e?.stderr || e?.message || ""));
-}
-
-/** 释放时「它已经不在了」也不算失败（上一代残留已被别处清掉 / 手工删掉）。 */
-export function isAlreadyGone(e) {
-  return /Cannot assign requested address|Cannot find device|does not exist/i.test(String(e?.stderr || e?.message || ""));
-}
-
-/**
- * @param {{ iface?: string, mode?: "bind"|"add", dir?: string, log?: (s:string)=>void, exec?: Function, fs?: object }} opts
- */
-export function createClaimer({ iface = "", mode = "bind", dir = "", log = () => {}, exec = defaultExec, fs = { mkdirSync, writeFileSync, chmodSync, readFileSync } } = {}) {
-  /** 只有 add 模式需要记账（bind 模式没改网卡，无残留可言）。 */
-  const claimed = new Set();
-
-  function persist() {
-    try {
-      fs.mkdirSync(dir, { recursive: true });
-      const file = join(dir, CLAIM_FILE);
-      fs.writeFileSync(file, `${JSON.stringify({ iface, mode, addrs: [...claimed], updatedAt: new Date().toISOString() }, null, 2)}\n`, { mode: 0o600 });
-      fs.chmodSync(file, 0o600); // mode 只在新建时生效，存量必须补
-    } catch (e) {
-      log(`[v6pool] ⚠ 认领账写盘失败（本次照跑，但崩溃后无法自动清残留）：${String(e?.message || e)}`);
-    }
-  }
-
-  async function ensure(addr) {
-    if (mode !== "add") return addr;
-    try {
-      await exec("ip", ["-6", "addr", "add", `${addr}/128`, "dev", iface, "nodad"]);
-      log(fmtClaim({ addr, iface }));
-    } catch (e) {
-      if (!isAlreadyThere(e)) {
-        log(fmtClaimFail({ addr, iface, error: String(e?.message || e) }));
-        throw e;
-      }
-    }
-    claimed.add(addr);
-    persist();
-    return addr;
-  }
-
-  async function release(addr) {
-    if (mode !== "add" || !claimed.has(addr)) return false;
-    claimed.delete(addr);
-    persist();
-    try {
-      await exec("ip", ["-6", "addr", "del", `${addr}/128`, "dev", iface]);
-      return true;
-    } catch (e) {
-      if (isAlreadyGone(e)) return false;
-      log(`[v6pool] ⚠ 释放源地址失败（重启时由启动清残留兜底）：${addr} — ${String(e?.stderr || e?.message || "").trim()}`);
-      return false;
-    }
-  }
-
-  async function releaseAll() {
-    const done = [];
-    for (const a of [...claimed]) if (await release(a)) done.push(a);
-    return done;
-  }
-
-  /** 退出钩子专用：进程正在退出，只能跑同步命令；清不掉的交给下次启动的 sweepStale。 */
-  function releaseAllSync({ execSync = defaultExecSync } = {}) {
-    if (mode !== "add" || !claimed.size) return [];
-    const done = [];
-    for (const a of [...claimed]) {
-      try {
-        execSync("ip", ["-6", "addr", "del", `${a}/128`, "dev", iface]);
-        done.push(a);
-      } catch {
-        /* 删不掉不抛：进程正在退出，抛了也没人接 */
-      }
-    }
-    claimed.clear();
-    return done;
-  }
-
-  /** 启动清残留：只删**上一代自己记在账上的**地址，绝不猜（不扫全表，不碰别人的地址）。 */
-  async function sweepStale() {
-    if (mode !== "add") return { removed: [], failed: [] };
-    let prev = [];
-    try {
-      prev = JSON.parse(fs.readFileSync(join(dir, CLAIM_FILE), "utf8"))?.addrs || [];
-    } catch {
-      return { removed: [], failed: [] };
-    }
-    const removed = [];
-    const failed = [];
-    for (const a of prev) {
-      if (typeof a !== "string" || !a) continue;
-      try {
-        await exec("ip", ["-6", "addr", "del", `${a}/128`, "dev", iface]);
-        removed.push(a);
-      } catch (e) {
-        if (!isAlreadyGone(e)) failed.push({ addr: a, error: String(e?.stderr || e?.message || "").trim() });
-      }
-    }
-    claimed.clear();
-    persist();
-    const r = { removed, failed };
-    if (removed.length || failed.length) log(fmtSweep({ iface, ...r }));
-    return r;
-  }
-
-  return {
-    ensure,
-    release,
-    releaseAll,
-    releaseAllSync,
-    sweepStale,
-    claimed: () => [...claimed],
-    get mode() {
-      return mode;
-    },
-  };
-}
+// v6pool · 让内核接受池里的源地址（bind 直用 / ip addr add 认领）+ 认领账 + 释放。
+//
+// 两条路（Linux 上 bind() 一个没分配给本机的源地址会直接 EADDRNOTAVAIL）：
+//   bind：net.ipv6.ip_nonlocal_bind=1 ⇒ 直接 bind 任意地址，**不碰网卡**（首选，零副作用）；
+//   add ：ip -6 addr add <addr>/128 dev <iface> nodad ⇒ 加进网卡（需 root）。
+//
+// 为什么要记账（本轮手工实测的教训）：加进网卡的地址会改变内核的**默认源地址选择**——
+// 我在 A 机上留了两个临时地址，结果不带 --interface 的请求也走了新地址（生产机上这是事故）。
+// 所以：每次 add/del 都落 `<dir>/claimed.json`（0600、非工作树）；close 时全部释放；
+// 启动时按这份账清上一代残留（崩溃 / 被 SIGKILL 时 close 跑不到）。
+import { chmodSync, mkdirSync, readFileSync, writeFileSync } from "node:fs";
+import { join } from "node:path";
+import { execFile, execFileSync } from "node:child_process";
+import { fmtClaim, fmtClaimFail, fmtSweep } from "./report.js";
+
+export const CLAIM_FILE = "claimed.json";
+
+/** 默认执行器：失败时把 stderr 原文带进 Error（不许把 stderr 吞掉——否则只剩「失败了」）。 */
+export function defaultExec(file, args, { timeoutMs = 10_000 } = {}) {
+  return new Promise((resolve, reject) => {
+    execFile(file, args, { timeout: timeoutMs }, (err, stdout, stderr) => {
+      if (err) {
+        const e = new Error(`${file} ${args.join(" ")} 失败：${String(stderr || err.message || "").trim()}`);
+        e.code = err.code;
+        e.stderr = String(stderr || "");
+        reject(e);
+        return;
+      }
+      resolve({ stdout: String(stdout || ""), stderr: String(stderr || "") });
+    });
+  });
+}
+
+/** 退出钩子专用（同步）：`process.on("exit")` 里跑不了 async，但地址必须清。 */
+export function defaultExecSync(file, args, { timeoutMs = 10_000 } = {}) {
+  execFileSync(file, args, { timeout: timeoutMs, stdio: "ignore" });
+}
+
+/** 幂等判据：`ip addr add` 报 File exists = 已经在网卡上了，不算失败。 */
+export function isAlreadyThere(e) {
+  return /File exists|already assigned/i.test(String(e?.stderr || e?.message || ""));
+}
+
+/** 释放时「它已经不在了」也不算失败（上一代残留已被别处清掉 / 手工删掉）。 */
+export function isAlreadyGone(e) {
+  return /Cannot assign requested address|Cannot find device|does not exist/i.test(String(e?.stderr || e?.message || ""));
+}
+
+/**
+ * @param {{ iface?: string, mode?: "bind"|"add", dir?: string, log?: (s:string)=>void, exec?: Function, fs?: object }} opts
+ */
+export function createClaimer({ iface = "", mode = "bind", dir = "", log = () => {}, exec = defaultExec, fs = { mkdirSync, writeFileSync, chmodSync, readFileSync } } = {}) {
+  /** 只有 add 模式需要记账（bind 模式没改网卡，无残留可言）。 */
+  const claimed = new Set();
+
+  function persist() {
+    try {
+      fs.mkdirSync(dir, { recursive: true });
+      const file = join(dir, CLAIM_FILE);
+      fs.writeFileSync(file, `${JSON.stringify({ iface, mode, addrs: [...claimed], updatedAt: new Date().toISOString() }, null, 2)}\n`, { mode: 0o600 });
+      fs.chmodSync(file, 0o600); // mode 只在新建时生效，存量必须补
+    } catch (e) {
+      log(`[v6pool] ⚠ 认领账写盘失败（本次照跑，但崩溃后无法自动清残留）：${String(e?.message || e)}`);
+    }
+  }
+
+  async function ensure(addr) {
+    if (mode !== "add") return addr;
+    try {
+      await exec("ip", ["-6", "addr", "add", `${addr}/128`, "dev", iface, "nodad"]);
+      log(fmtClaim({ addr, iface }));
+    } catch (e) {
+      if (!isAlreadyThere(e)) {
+        log(fmtClaimFail({ addr, iface, error: String(e?.message || e) }));
+        throw e;
+      }
+    }
+    claimed.add(addr);
+    persist();
+    return addr;
+  }
+
+  async function release(addr) {
+    if (mode !== "add" || !claimed.has(addr)) return false;
+    claimed.delete(addr);
+    persist();
+    try {
+      await exec("ip", ["-6", "addr", "del", `${addr}/128`, "dev", iface]);
+      return true;
+    } catch (e) {
+      if (isAlreadyGone(e)) return false;
+      log(`[v6pool] ⚠ 释放源地址失败（重启时由启动清残留兜底）：${addr} — ${String(e?.stderr || e?.message || "").trim()}`);
+      return false;
+    }
+  }
+
+  async function releaseAll() {
+    const done = [];
+    for (const a of [...claimed]) if (await release(a)) done.push(a);
+    return done;
+  }
+
+  /** 退出钩子专用：进程正在退出，只能跑同步命令；清不掉的交给下次启动的 sweepStale。 */
+  function releaseAllSync({ execSync = defaultExecSync } = {}) {
+    if (mode !== "add" || !claimed.size) return [];
+    const done = [];
+    for (const a of [...claimed]) {
+      try {
+        execSync("ip", ["-6", "addr", "del", `${a}/128`, "dev", iface]);
+        done.push(a);
+      } catch {
+        /* 删不掉不抛：进程正在退出，抛了也没人接 */
+      }
+    }
+    claimed.clear();
+    return done;
+  }
+
+  /** 启动清残留：只删**上一代自己记在账上的**地址，绝不猜（不扫全表，不碰别人的地址）。 */
+  async function sweepStale() {
+    if (mode !== "add") return { removed: [], failed: [] };
+    let prev = [];
+    try {
+      prev = JSON.parse(fs.readFileSync(join(dir, CLAIM_FILE), "utf8"))?.addrs || [];
+    } catch {
+      return { removed: [], failed: [] };
+    }
+    const removed = [];
+    const failed = [];
+    for (const a of prev) {
+      if (typeof a !== "string" || !a) continue;
+      try {
+        await exec("ip", ["-6", "addr", "del", `${a}/128`, "dev", iface]);
+        removed.push(a);
+      } catch (e) {
+        if (!isAlreadyGone(e)) failed.push({ addr: a, error: String(e?.stderr || e?.message || "").trim() });
+      }
+    }
+    claimed.clear();
+    persist();
+    const r = { removed, failed };
+    if (removed.length || failed.length) log(fmtSweep({ iface, ...r }));
+    return r;
+  }
+
+  return {
+    ensure,
+    release,
+    releaseAll,
+    releaseAllSync,
+    sweepStale,
+    claimed: () => [...claimed],
+    get mode() {
+      return mode;
+    },
+  };
+}

package/src/v6pool/config.js

@@ -1,65 +1,65 @@
-// v6pool · 配置解析：env 优先，缺省值集中一处；纯函数，便于单测。
-import { join } from "node:path";
-import { logDir } from "../logs.js";
-
-/**
- * 缺省**开** + **自动判断**：本机有整段路由的 IPv6 前缀就启用（判据见 detect.js），
- * 没有就诚实跳过（行为与今天完全一致）。判据不靠 env，靠事实。
- */
-export const DEFAULTS = {
-  enabled: true,
-  count: 4,
-  strategy: "session",
-  cooldownMs: 600_000,
-  rotate: true,
-  minHostBits: 8,
-  claim: "auto",
-  probePath: "/zen/v1/models",
-  retireMs: 60_000,
-  debug: false,
-};
-
-const OFF = ["0", "off", "false", "no", "disable", "disabled"];
-const CLAIM_MODES = ["auto", "bind", "add"];
-
-function envBool(env, name, fallback) {
-  const raw = env[name];
-  if (raw === undefined || raw === null || raw === "") return fallback;
-  return !OFF.includes(String(raw).trim().toLowerCase());
-}
-
-function envInt(env, name, fallback) {
-  const v = Number(env[name]);
-  return Number.isInteger(v) && v > 0 ? v : fallback;
-}
-
-function envStr(env, name, fallback) {
-  const raw = env[name];
-  return typeof raw === "string" && raw.trim() ? raw.trim() : fallback;
-}
-
-/**
- * 解析 v6 出口池配置。
- * @param {Record<string,string|undefined>} env
- * @param {{ logDirFn?: () => string }} [deps] 测试可注入 logDir
- */
-export function resolveV6Config(env = process.env, { logDirFn = logDir } = {}) {
-  const strategy = envStr(env, "MSLXDFF_V6_STRATEGY", DEFAULTS.strategy) === "request" ? "request" : "session";
-  const claimRaw = envStr(env, "MSLXDFF_V6_CLAIM", DEFAULTS.claim).toLowerCase();
-  return {
-    enabled: envBool(env, "MSLXDFF_V6_POOL", DEFAULTS.enabled),
-    /** 显式池前缀（`2001:db8::/64`）；空 = 取本机全局地址的前缀 */
-    prefix: envStr(env, "MSLXDFF_V6_PREFIX", ""),
-    iface: envStr(env, "MSLXDFF_V6_IFACE", ""),
-    count: envInt(env, "MSLXDFF_V6_COUNT", DEFAULTS.count),
-    strategy,
-    cooldownMs: envInt(env, "MSLXDFF_V6_COOLDOWN_MS", DEFAULTS.cooldownMs),
-    rotate: envBool(env, "MSLXDFF_V6_ROTATE", DEFAULTS.rotate),
-    minHostBits: envInt(env, "MSLXDFF_V6_MIN_HOST_BITS", DEFAULTS.minHostBits),
-    claim: CLAIM_MODES.includes(claimRaw) ? claimRaw : DEFAULTS.claim,
-    dir: envStr(env, "MSLXDFF_V6_DIR", join(logDirFn(), "v6pool")),
-    probePath: envStr(env, "MSLXDFF_V6_PROBE_PATH", DEFAULTS.probePath),
-    retireMs: envInt(env, "MSLXDFF_V6_RETIRE_MS", DEFAULTS.retireMs),
-    debug: envBool(env, "MSLXDFF_V6_DEBUG", DEFAULTS.debug),
-  };
-}
+// v6pool · 配置解析：env 优先，缺省值集中一处；纯函数，便于单测。
+import { join } from "node:path";
+import { logDir } from "../logs.js";
+
+/**
+ * 缺省**开** + **自动判断**：本机有整段路由的 IPv6 前缀就启用（判据见 detect.js），
+ * 没有就诚实跳过（行为与今天完全一致）。判据不靠 env，靠事实。
+ */
+export const DEFAULTS = {
+  enabled: true,
+  count: 4,
+  strategy: "session",
+  cooldownMs: 600_000,
+  rotate: true,
+  minHostBits: 8,
+  claim: "auto",
+  probePath: "/zen/v1/models",
+  retireMs: 60_000,
+  debug: false,
+};
+
+const OFF = ["0", "off", "false", "no", "disable", "disabled"];
+const CLAIM_MODES = ["auto", "bind", "add"];
+
+function envBool(env, name, fallback) {
+  const raw = env[name];
+  if (raw === undefined || raw === null || raw === "") return fallback;
+  return !OFF.includes(String(raw).trim().toLowerCase());
+}
+
+function envInt(env, name, fallback) {
+  const v = Number(env[name]);
+  return Number.isInteger(v) && v > 0 ? v : fallback;
+}
+
+function envStr(env, name, fallback) {
+  const raw = env[name];
+  return typeof raw === "string" && raw.trim() ? raw.trim() : fallback;
+}
+
+/**
+ * 解析 v6 出口池配置。
+ * @param {Record<string,string|undefined>} env
+ * @param {{ logDirFn?: () => string }} [deps] 测试可注入 logDir
+ */
+export function resolveV6Config(env = process.env, { logDirFn = logDir } = {}) {
+  const strategy = envStr(env, "MSLXDFF_V6_STRATEGY", DEFAULTS.strategy) === "request" ? "request" : "session";
+  const claimRaw = envStr(env, "MSLXDFF_V6_CLAIM", DEFAULTS.claim).toLowerCase();
+  return {
+    enabled: envBool(env, "MSLXDFF_V6_POOL", DEFAULTS.enabled),
+    /** 显式池前缀（`2001:db8::/64`）；空 = 取本机全局地址的前缀 */
+    prefix: envStr(env, "MSLXDFF_V6_PREFIX", ""),
+    iface: envStr(env, "MSLXDFF_V6_IFACE", ""),
+    count: envInt(env, "MSLXDFF_V6_COUNT", DEFAULTS.count),
+    strategy,
+    cooldownMs: envInt(env, "MSLXDFF_V6_COOLDOWN_MS", DEFAULTS.cooldownMs),
+    rotate: envBool(env, "MSLXDFF_V6_ROTATE", DEFAULTS.rotate),
+    minHostBits: envInt(env, "MSLXDFF_V6_MIN_HOST_BITS", DEFAULTS.minHostBits),
+    claim: CLAIM_MODES.includes(claimRaw) ? claimRaw : DEFAULTS.claim,
+    dir: envStr(env, "MSLXDFF_V6_DIR", join(logDirFn(), "v6pool")),
+    probePath: envStr(env, "MSLXDFF_V6_PROBE_PATH", DEFAULTS.probePath),
+    retireMs: envInt(env, "MSLXDFF_V6_RETIRE_MS", DEFAULTS.retireMs),
+    debug: envBool(env, "MSLXDFF_V6_DEBUG", DEFAULTS.debug),
+  };
+}