mrs-toolbox-cli 8.1.2 → 8.1.3

package/npm-cache/_cacache/content-v2/sha512/{7d/ff/a4f7f9bf627ee5e6f55a34d9a9c7e0b6d4b349740eeb221dd567ea5b07e3f5a5be2886ac86e61be3fce787520a5a423021dc9c216a8043513b96a70348f2 → db/3d/f9e7ba2f48f974248097913ac12e073b51af0066861ce3883f83fe03722f91e638451bd97f59c68103e6b109a16053407694a8cbeb42e4dcf9520b2c0561}

@@ -1214,7 +1214,7 @@
   "dist-tags": {
     "latest": "4.2.0"
   },
-  "_rev": "108-2b238b9552109829",
+  "_rev": "113-ae7bfe3c95ac3c4f",
   "_id": "@smithy/util-uri-escape",
   "readme": "# @smithy/util-uri-escape\n\n[![NPM version](https://img.shields.io/npm/v/@smithy/util-uri-escape/latest.svg)](https://www.npmjs.com/package/@smithy/util-uri-escape)\n[![NPM downloads](https://img.shields.io/npm/dm/@smithy/util-uri-escape.svg)](https://www.npmjs.com/package/@smithy/util-uri-escape)\n\n> An internal package\n\n## Usage\n\nYou probably shouldn't, at least directly.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{de/cb/61a12265331e9ea92c154289e1c5ad748a9d9ceab9bb4e460a43eac0cbcea13e05cfcce0b6bde5ddff564c3fae87d603f3c03db9deb29292389bab1bd041 → dc/bd/9783185bfa4d845d94c22873fbca92657ec8b5da2f599d9578ec07cceeb64502bbe7bb9b700c7b9271c195cbc18f946f7cd6d05de83fbab05939c573bbfd}

@@ -6561,7 +6561,7 @@
     "latest": "7.0.1",
     "canary": "0.15.0-1"
   },
-  "_rev": "203-6a33e36036e6318c",
+  "_rev": "208-3ca68696893287e3",
   "_id": "archiver",
   "readme": "# Archiver\n\nA streaming interface for archive generation\n\nVisit the [API documentation](https://www.archiverjs.com/) for a list of all methods available.\n\n## Install\n\n```bash\nnpm install archiver --save\n```\n\n## Quick Start\n\n```js\n// require modules\nconst fs = require('fs');\nconst archiver = require('archiver');\n\n// create a file to stream archive data to.\nconst output = fs.createWriteStream(__dirname + '/example.zip');\nconst archive = archiver('zip', {\n  zlib: { level: 9 } // Sets the compression level.\n});\n\n// listen for all archive data to be written\n// 'close' event is fired only when a file descriptor is involved\noutput.on('close', function() {\n  console.log(archive.pointer() + ' total bytes');\n  console.log('archiver has been finalized and the output file descriptor has closed.');\n});\n\n// This event is fired when the data source is drained no matter what was the data source.\n// It is not part of this library but rather from the NodeJS Stream API.\n// @see: https://nodejs.org/api/stream.html#stream_event_end\noutput.on('end', function() {\n  console.log('Data has been drained');\n});\n\n// good practice to catch warnings (ie stat failures and other non-blocking errors)\narchive.on('warning', function(err) {\n  if (err.code === 'ENOENT') {\n    // log warning\n  } else {\n    // throw error\n    throw err;\n  }\n});\n\n// good practice to catch this error explicitly\narchive.on('error', function(err) {\n  throw err;\n});\n\n// pipe archive data to the file\narchive.pipe(output);\n\n// append a file from stream\nconst file1 = __dirname + '/file1.txt';\narchive.append(fs.createReadStream(file1), { name: 'file1.txt' });\n\n// append a file from string\narchive.append('string cheese!', { name: 'file2.txt' });\n\n// append a file from buffer\nconst buffer3 = Buffer.from('buff it!');\narchive.append(buffer3, { name: 'file3.txt' });\n\n// append a file\narchive.file('file1.txt', { name: 'file4.txt' });\n\n// append files from a sub-directory and naming it `new-subdir` within the archive\narchive.directory('subdir/', 'new-subdir');\n\n// append files from a sub-directory, putting its contents at the root of archive\narchive.directory('subdir/', false);\n\n// append files from a glob pattern\narchive.glob('file*.txt', {cwd:__dirname});\n\n// finalize the archive (ie we are done appending files but streams have to finish yet)\n// 'close', 'end' or 'finish' may be fired right after calling this method so register to them beforehand\narchive.finalize();\n```\n\n## Formats\n\nArchiver ships with out of the box support for TAR and ZIP archives.\n\nYou can register additional formats with `registerFormat`.\n\nYou can check if format already exists before to register a new one with `isRegisteredFormat`.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{51/81/2e8d7bff0327e84dca85fdbda37c26f7765cc0f0f7f862f30c88fbb85affa53a4528ac8a8826f2c3b6f9c4e134713731eab537791c32d0e20e6b4749dc7b → dd/78/8fb563f107995924ab2301b700336be30cd92ec7eef4cff88a11a122b58f09139f22704a118442477dffe4d84a5d691394728be0e4148ca1b386cda5cc3c}

@@ -7262,7 +7262,7 @@
     "latest": "4.1.1",
     "v3-legacy": "3.4.3"
   },
-  "_rev": "696-f9e4130aa32b30c4",
+  "_rev": "709-09f7f080aa1f2231",
   "_id": "jackspeak",
   "readme": "# jackspeak\n\nA very strict and proper argument parser.\n\nValidate string, boolean, and number options, from the command\nline and the environment.\n\nCall the `jack` method with a config object, and then chain\nmethods off of it.\n\nAt the end, call the `.parse()` method, and you'll get an object\nwith `positionals` and `values` members.\n\nAny unrecognized configs or invalid values will throw an error.\n\nAs long as you define configs using object literals, types will\nbe properly inferred and TypeScript will know what kinds of\nthings you got.\n\nIf you give it a prefix for environment variables, then defaults\nwill be read from the environment, and parsed values written back\nto it, so you can easily pass configs through to child processes.\n\nAutomatically generates a `usage`/`help` banner by calling the\n`.usage()` method.\n\nUnless otherwise noted, all methods return the object itself.\n\n## USAGE\n\n```js\nimport { jack } from 'jackspeak'\n// this works too:\n// const { jack } = require('jackspeak')\n\nconst { positionals, values } = jack({ envPrefix: 'FOO' })\n  .flag({\n    asdf: { description: 'sets the asfd flag', short: 'a', default: true },\n    'no-asdf': { description: 'unsets the asdf flag', short: 'A' },\n    foo: { description: 'another boolean', short: 'f' },\n  })\n  .optList({\n    'ip-addrs': {\n      description: 'addresses to ip things',\n      delim: ',', // defaults to '\\n'\n      default: ['127.0.0.1'],\n    },\n  })\n  .parse([\n    'some',\n    'positional',\n    '--ip-addrs',\n    '192.168.0.1',\n    '--ip-addrs',\n    '1.1.1.1',\n    'args',\n    '--foo', // sets the foo flag\n    '-A', // short for --no-asdf, sets asdf flag to false\n  ])\n\nconsole.log(process.env.FOO_ASDF) // '0'\nconsole.log(process.env.FOO_FOO) // '1'\nconsole.log(values) // {\n//   'ip-addrs': ['192.168.0.1', '1.1.1.1'],\n//   foo: true,\n//   asdf: false,\n// }\nconsole.log(process.env.FOO_IP_ADDRS) // '192.168.0.1,1.1.1.1'\nconsole.log(positionals) // ['some', 'positional', 'args']\n```\n\n## `jack(options: JackOptions = {}) => Jack`\n\nReturns a `Jack` object that can be used to chain and add\nfield definitions. The other methods (apart from `validate()`,\n`parse()`, and `usage()` obviously) return the same Jack object,\nupdated with the new types, so they can be chained together as\nshown in the code examples.\n\nOptions:\n\n- `allowPositionals` Defaults to true. Set to `false` to not\n  allow any positional arguments.\n\n- `envPrefix` Set to a string to write configs to and read\n  configs from the environment. For example, if set to `MY_APP`\n  then the `foo-bar` config will default based on the value of\n  `env.MY_APP_FOO_BAR` and will write back to that when parsed.\n\n  Boolean values are written as `'1'` and `'0'`, and will be\n  treated as `true` if they're `'1'` or false otherwise.\n\n  Number values are written with their `toString()`\n  representation.\n\n  Strings are just strings.\n\n  Any value with `multiple: true` will be represented in the\n  environment split by a delimiter, which defaults to `\\n`.\n\n- `env` The place to read/write environment variables. Defaults\n  to `process.env`.\n\n- `usage` A short usage string to print at the top of the help\n  banner.\n\n- `stopAtPositional` Boolean, default false. Stop parsing opts\n  and flags at the first positional argument. This is useful if\n  you want to pass certain options to subcommands, like some\n  programs do, so you can stop parsing and pass the positionals\n  to the subcommand to parse.\n\n- `stopAtPositionalTest` Conditional `stopAtPositional`. Provide\n  a function that takes a positional argument string and returns\n  boolean. If it returns `true`, then parsing will stop. Useful\n  when _some_ subcommands should parse the rest of the command\n  line options, and others should not.\n\n### `Jack.heading(text: string, level?: 1 | 2 | 3 | 4 | 5 | 6)`\n\nDefine a short string heading, used in the `usage()` output.\n\nIndentation of the heading and subsequent description/config\nusage entries (up until the next heading) is set by the heading\nlevel.\n\nIf the first usage item defined is a heading, it is always\ntreated as level 1, regardless of the argument provided.\n\nHeadings level 1 and 2 will have a line of padding underneath\nthem. Headings level 3 through 6 will not.\n\n### `Jack.description(text: string, { pre?: boolean } = {})`\n\nDefine a long string description, used in the `usage()` output.\n\nIf the `pre` option is set to `true`, then whitespace will not be\nnormalized. However, if any line is too long for the width\nallotted, it will still be wrapped.\n\n## Option Definitions\n\nConfigs are defined by calling the appropriate field definition\nmethod with an object where the keys are the long option name,\nand the value defines the config.\n\nOptions:\n\n- `type` Only needed for the `addFields` method, as the others\n  set it implicitly. Can be `'string'`, `'boolean'`, or\n  `'number'`.\n- `multiple` Only needed for the `addFields` method, as the\n  others set it implicitly. Set to `true` to define an array\n  type. This means that it can be set on the CLI multiple times,\n  set as an array in the `values`\n  and it is represented in the environment as a delimited string.\n- `short` A one-character shorthand for the option.\n- `description` Some words to describe what this option is and\n  why you'd set it.\n- `hint` (Only relevant for non-boolean types) The thing to show\n  in the usage output, like `--option=<hint>`\n- `validate` A function that returns false (or throws) if an\n  option value is invalid.\n- `validOptions` An array of strings or numbers that define the\n  valid values that can be set. This is not allowed on `boolean`\n  (flag) options. May be used along with a `validate()` method.\n- `default` A default value for the field. Note that this may be\n  overridden by an environment variable, if present.\n\n### `Jack.flag({ [option: string]: definition, ... })`\n\nDefine one or more boolean fields.\n\nBoolean options may be set to `false` by using a\n`--no-${optionName}` argument, which will be implicitly created\nif it's not defined to be something else.\n\nIf a boolean option named `no-${optionName}` with the same\n`multiple` setting is in the configuration, then that will be\ntreated as a negating flag.\n\n### `Jack.flagList({ [option: string]: definition, ... })`\n\nDefine one or more boolean array fields.\n\n### `Jack.num({ [option: string]: definition, ... })`\n\nDefine one or more number fields. These will be set in the\nenvironment as a stringified number, and included in the `values`\nobject as a number.\n\n### `Jack.numList({ [option: string]: definition, ... })`\n\nDefine one or more number list fields. These will be set in the\nenvironment as a delimited set of stringified numbers, and\nincluded in the `values` as a number array.\n\n### `Jack.opt({ [option: string]: definition, ... })`\n\nDefine one or more string option fields.\n\n### `Jack.optList({ [option: string]: definition, ... })`\n\nDefine one or more string list fields.\n\n### `Jack.addFields({ [option: string]: definition, ... })`\n\nDefine one or more fields of any type. Note that `type` and\n`multiple` must be set explicitly on each definition when using\nthis method.\n\n## Informative Getters\n\nOnce you've defined several fields with the various methods\ndescribed above, you can get at the definitions and such with\nthese methods.\n\nThis are primarily just informative, but can be useful in some\nadvanced scenarios, such as providing \"Did you mean?\" type\nsuggestions when someone misspells an option name.\n\n### `Jack.definitions`\n\nThe set of config field definitions in no particular order. This\nis a data object suitable to passing to `util.parseArgs`, but\nwith the addition of `short` and `description` fields, where\nappropriate.\n\n### `Jack.jackOptions`\n\nThe options passed into the initial `jack()` function (or `new\nJack()` constructor).\n\n### `Jack.shorts`\n\nThe `{ <short>: <long> }` name record for all short options\ndefined.\n\n### `Jack.usageFields`\n\nThe array of fields that are used to generate `Jack.usage()` and\n`Jack.usageMarkdown()` content.\n\n## Actions\n\nUse these methods on a Jack object that's already had its config\nfields defined.\n\n### `Jack.parse(args: string[] = process.argv): { positionals: string[], values: OptionsResults }`\n\nParse the arguments list, write to the environment if `envPrefix`\nis set, and returned the parsed values and remaining positional\narguments.\n\n### `Jack.validate(o: any): asserts o is OptionsResults`\n\nThrows an error if the object provided is not a valid result set,\nfor the configurations defined thusfar.\n\n### `Jack.usage(): string`\n\nReturns the compiled `usage` string, with all option descriptions\nand heading/description text, wrapped to the appropriate width\nfor the terminal.\n\n### `Jack.setConfigValues(options: OptionsResults, src?: string)`\n\nValidate the `options` argument, and set the default value for\neach field that appears in the options.\n\nValues provided will be overridden by environment variables or\ncommand line arguments.\n\n### `Jack.usageMarkdown(): string`\n\nReturns the compiled `usage` string, with all option descriptions\nand heading/description text, but as markdown instead of\nformatted for a terminal, for generating HTML documentation for\nyour CLI.\n\n## Some Example Code\n\nAlso see [the examples\nfolder](https://github.com/isaacs/jackspeak/tree/master/examples)\n\n```js\nimport { jack } from 'jackspeak'\n\nconst j = jack({\n  // Optional\n  // This will be auto-generated from the descriptions if not supplied\n  // top level usage line, printed by -h\n  // will be auto-generated if not specified\n  usage: 'foo [options] <files>',\n})\n  .heading('The best Foo that ever Fooed')\n  .description(\n    `\n    Executes all the files and interprets their output as\n    TAP formatted test result data.\n\n    To parse TAP data from stdin, specify \"-\" as a filename.\n  `,\n  )\n\n  // flags don't take a value, they're boolean on or off, and can be\n  // turned off by prefixing with `--no-`\n  // so this adds support for -b to mean --bail, or -B to mean --no-bail\n  .flag({\n    flag: {\n      // specify a short value if you like.  this must be a single char\n      short: 'f',\n      // description is optional as well.\n      description: `Make the flags wave`,\n      // default value for flags is 'false', unless you change it\n      default: true,\n    },\n    'no-flag': {\n      // you can can always negate a flag with `--no-flag`\n      // specifying a negate option will let you define a short\n      // single-char option for negation.\n      short: 'F',\n      description: `Do not wave the flags`,\n    },\n  })\n\n  // Options that take a value are specified with `opt()`\n  .opt({\n    reporter: {\n      short: 'R',\n      description: 'the style of report to display',\n    },\n  })\n\n  // if you want a number, say so, and jackspeak will enforce it\n  .num({\n    jobs: {\n      short: 'j',\n      description: 'how many jobs to run in parallel',\n      default: 1,\n    },\n  })\n\n  // A list is an option that can be specified multiple times,\n  // to expand into an array of all the settings.  Normal opts\n  // will just give you the last value specified.\n  .optList({\n    'node-arg': {},\n  })\n\n  // a flagList is an array of booleans, so `-ddd` is [true, true, true]\n  // count the `true` values to treat it as a counter.\n  .flagList({\n    debug: { short: 'd' },\n  })\n\n  // opts take a value, and is set to the string in the results\n  // you can combine multiple short-form flags together, but\n  // an opt will end the combine chain, posix-style.  So,\n  // -bofilename would be like --bail --output-file=filename\n  .opt({\n    'output-file': {\n      short: 'o',\n      // optional: make it -o<file> in the help output insead of -o<value>\n      hint: 'file',\n      description: `Send the raw output to the specified file.`,\n    },\n  })\n\n// now we can parse argv like this:\nconst { values, positionals } = j.parse(process.argv)\n\n// or decide to show the usage banner\nconsole.log(j.usage())\n\n// or validate an object config we got from somewhere else\ntry {\n  j.validate(someConfig)\n} catch (er) {\n  console.error('someConfig is not valid!', er)\n}\n```\n\n## Name\n\nThe inspiration for this module is [yargs](http://npm.im/yargs), which\nis pirate talk themed. Yargs has all the features, and is infinitely\nflexible. \"Jackspeak\" is the slang of the royal navy. This module\ndoes not have all the features. It is declarative and rigid by design.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{86/1a/b5d111e7ca0b571a13690723b40ddcf824573ac04227e98be86515edcf82dd13d5dd647659e2f7224b4ac3c961bb3fcb6973af1a7afcd8f73e2ec8373a23 → de/b5/6e9a727b1b95cc4cb460cfe5ebd6cd3621b485924962a29a4aa6369de2ebf6e9c5daa4001dce0ff2a56c62dc489b2ad1c16f823d6f220f798c70b7946fe7}

@@ -9286,7 +9286,7 @@
     "next": "3.3.5",
     "legacy-v4": "4.2.8"
   },
-  "_rev": "1665-7c6544af94dadb45",
+  "_rev": "1678-c065fdbf723a078e",
   "_id": "minipass",
   "readme": "# minipass\n\nA _very_ minimal implementation of a [PassThrough\nstream](https://nodejs.org/api/stream.html#stream_class_stream_passthrough)\n\n[It's very\nfast](https://docs.google.com/spreadsheets/d/1K_HR5oh3r80b8WVMWCPPjfuWXUgfkmhlX7FGI6JJ8tY/edit?usp=sharing)\nfor objects, strings, and buffers.\n\nSupports `pipe()`ing (including multi-`pipe()` and backpressure\ntransmission), buffering data until either a `data` event handler\nor `pipe()` is added (so you don't lose the first chunk), and\nmost other cases where PassThrough is a good idea.\n\nThere is a `read()` method, but it's much more efficient to\nconsume data from this stream via `'data'` events or by calling\n`pipe()` into some other stream. Calling `read()` requires the\nbuffer to be flattened in some cases, which requires copying\nmemory.\n\nIf you set `objectMode: true` in the options, then whatever is\nwritten will be emitted. Otherwise, it'll do a minimal amount of\nBuffer copying to ensure proper Streams semantics when `read(n)`\nis called.\n\n`objectMode` can only be set at instantiation. Attempting to\nwrite something other than a String or Buffer without having set\n`objectMode` in the options will throw an error.\n\nThis is not a `through` or `through2` stream. It doesn't\ntransform the data, it just passes it right through. If you want\nto transform the data, extend the class, and override the\n`write()` method. Once you're done transforming the data however\nyou want, call `super.write()` with the transform output.\n\nFor some examples of streams that extend Minipass in various\nways, check out:\n\n- [minizlib](http://npm.im/minizlib)\n- [fs-minipass](http://npm.im/fs-minipass)\n- [tar](http://npm.im/tar)\n- [minipass-collect](http://npm.im/minipass-collect)\n- [minipass-flush](http://npm.im/minipass-flush)\n- [minipass-pipeline](http://npm.im/minipass-pipeline)\n- [tap](http://npm.im/tap)\n- [tap-parser](http://npm.im/tap-parser)\n- [treport](http://npm.im/treport)\n- [minipass-fetch](http://npm.im/minipass-fetch)\n- [pacote](http://npm.im/pacote)\n- [make-fetch-happen](http://npm.im/make-fetch-happen)\n- [cacache](http://npm.im/cacache)\n- [ssri](http://npm.im/ssri)\n- [npm-registry-fetch](http://npm.im/npm-registry-fetch)\n- [minipass-json-stream](http://npm.im/minipass-json-stream)\n- [minipass-sized](http://npm.im/minipass-sized)\n\n## Usage in TypeScript\n\nThe `Minipass` class takes three type template definitions:\n\n- `RType` the type being read, which defaults to `Buffer`. If\n  `RType` is `string`, then the constructor _must_ get an options\n  object specifying either an `encoding` or `objectMode: true`.\n  If it's anything other than `string` or `Buffer`, then it\n  _must_ get an options object specifying `objectMode: true`.\n- `WType` the type being written. If `RType` is `Buffer` or\n  `string`, then this defaults to `ContiguousData` (Buffer,\n  string, ArrayBuffer, or ArrayBufferView). Otherwise, it\n  defaults to `RType`.\n- `Events` type mapping event names to the arguments emitted\n  with that event, which extends `Minipass.Events`.\n\nTo declare types for custom events in subclasses, extend the\nthird parameter with your own event signatures. For example:\n\n```js\nimport { Minipass } from 'minipass'\n\n// a NDJSON stream that emits 'jsonError' when it can't stringify\nexport interface Events extends Minipass.Events {\n  jsonError: [e: Error]\n}\n\nexport class NDJSONStream extends Minipass<string, any, Events> {\n  constructor() {\n    super({ objectMode: true })\n  }\n\n  // data is type `any` because that's WType\n  write(data, encoding, cb) {\n    try {\n      const json = JSON.stringify(data)\n      return super.write(json + '\\n', encoding, cb)\n    } catch (er) {\n      if (!er instanceof Error) {\n        er = Object.assign(new Error('json stringify failed'), {\n          cause: er,\n        })\n      }\n      // trying to emit with something OTHER than an error will\n      // fail, because we declared the event arguments type.\n      this.emit('jsonError', er)\n    }\n  }\n}\n\nconst s = new NDJSONStream()\ns.on('jsonError', e => {\n  // here, TS knows that e is an Error\n})\n```\n\nEmitting/handling events that aren't declared in this way is\nfine, but the arguments will be typed as `unknown`.\n\n## Differences from Node.js Streams\n\nThere are several things that make Minipass streams different\nfrom (and in some ways superior to) Node.js core streams.\n\nPlease read these caveats if you are familiar with node-core\nstreams and intend to use Minipass streams in your programs.\n\nYou can avoid most of these differences entirely (for a very\nsmall performance penalty) by setting `{async: true}` in the\nconstructor options.\n\n### Timing\n\nMinipass streams are designed to support synchronous use-cases.\nThus, data is emitted as soon as it is available, always. It is\nbuffered until read, but no longer. Another way to look at it is\nthat Minipass streams are exactly as synchronous as the logic\nthat writes into them.\n\nThis can be surprising if your code relies on\n`PassThrough.write()` always providing data on the next tick\nrather than the current one, or being able to call `resume()` and\nnot have the entire buffer disappear immediately.\n\nHowever, without this synchronicity guarantee, there would be no\nway for Minipass to achieve the speeds it does, or support the\nsynchronous use cases that it does. Simply put, waiting takes\ntime.\n\nThis non-deferring approach makes Minipass streams much easier to\nreason about, especially in the context of Promises and other\nflow-control mechanisms.\n\nExample:\n\n```js\n// hybrid module, either works\nimport { Minipass } from 'minipass'\n// or:\nconst { Minipass } = require('minipass')\n\nconst stream = new Minipass()\nstream.on('data', () => console.log('data event'))\nconsole.log('before write')\nstream.write('hello')\nconsole.log('after write')\n// output:\n// before write\n// data event\n// after write\n```\n\n### Exception: Async Opt-In\n\nIf you wish to have a Minipass stream with behavior that more\nclosely mimics Node.js core streams, you can set the stream in\nasync mode either by setting `async: true` in the constructor\noptions, or by setting `stream.async = true` later on.\n\n```js\n// hybrid module, either works\nimport { Minipass } from 'minipass'\n// or:\nconst { Minipass } = require('minipass')\n\nconst asyncStream = new Minipass({ async: true })\nasyncStream.on('data', () => console.log('data event'))\nconsole.log('before write')\nasyncStream.write('hello')\nconsole.log('after write')\n// output:\n// before write\n// after write\n// data event <-- this is deferred until the next tick\n```\n\nSwitching _out_ of async mode is unsafe, as it could cause data\ncorruption, and so is not enabled. Example:\n\n```js\nimport { Minipass } from 'minipass'\nconst stream = new Minipass({ encoding: 'utf8' })\nstream.on('data', chunk => console.log(chunk))\nstream.async = true\nconsole.log('before writes')\nstream.write('hello')\nsetStreamSyncAgainSomehow(stream) // <-- this doesn't actually exist!\nstream.write('world')\nconsole.log('after writes')\n// hypothetical output would be:\n// before writes\n// world\n// after writes\n// hello\n// NOT GOOD!\n```\n\nTo avoid this problem, once set into async mode, any attempt to\nmake the stream sync again will be ignored.\n\n```js\nconst { Minipass } = require('minipass')\nconst stream = new Minipass({ encoding: 'utf8' })\nstream.on('data', chunk => console.log(chunk))\nstream.async = true\nconsole.log('before writes')\nstream.write('hello')\nstream.async = false // <-- no-op, stream already async\nstream.write('world')\nconsole.log('after writes')\n// actual output:\n// before writes\n// after writes\n// hello\n// world\n```\n\n### No High/Low Water Marks\n\nNode.js core streams will optimistically fill up a buffer,\nreturning `true` on all writes until the limit is hit, even if\nthe data has nowhere to go. Then, they will not attempt to draw\nmore data in until the buffer size dips below a minimum value.\n\nMinipass streams are much simpler. The `write()` method will\nreturn `true` if the data has somewhere to go (which is to say,\ngiven the timing guarantees, that the data is already there by\nthe time `write()` returns).\n\nIf the data has nowhere to go, then `write()` returns false, and\nthe data sits in a buffer, to be drained out immediately as soon\nas anyone consumes it.\n\nSince nothing is ever buffered unnecessarily, there is much less\ncopying data, and less bookkeeping about buffer capacity levels.\n\n### Hazards of Buffering (or: Why Minipass Is So Fast)\n\nSince data written to a Minipass stream is immediately written\nall the way through the pipeline, and `write()` always returns\ntrue/false based on whether the data was fully flushed,\nbackpressure is communicated immediately to the upstream caller.\nThis minimizes buffering.\n\nConsider this case:\n\n```js\nconst { PassThrough } = require('stream')\nconst p1 = new PassThrough({ highWaterMark: 1024 })\nconst p2 = new PassThrough({ highWaterMark: 1024 })\nconst p3 = new PassThrough({ highWaterMark: 1024 })\nconst p4 = new PassThrough({ highWaterMark: 1024 })\n\np1.pipe(p2).pipe(p3).pipe(p4)\np4.on('data', () => console.log('made it through'))\n\n// this returns false and buffers, then writes to p2 on next tick (1)\n// p2 returns false and buffers, pausing p1, then writes to p3 on next tick (2)\n// p3 returns false and buffers, pausing p2, then writes to p4 on next tick (3)\n// p4 returns false and buffers, pausing p3, then emits 'data' and 'drain'\n// on next tick (4)\n// p3 sees p4's 'drain' event, and calls resume(), emitting 'resume' and\n// 'drain' on next tick (5)\n// p2 sees p3's 'drain', calls resume(), emits 'resume' and 'drain' on next tick (6)\n// p1 sees p2's 'drain', calls resume(), emits 'resume' and 'drain' on next\n// tick (7)\n\np1.write(Buffer.alloc(2048)) // returns false\n```\n\nAlong the way, the data was buffered and deferred at each stage,\nand multiple event deferrals happened, for an unblocked pipeline\nwhere it was perfectly safe to write all the way through!\n\nFurthermore, setting a `highWaterMark` of `1024` might lead\nsomeone reading the code to think an advisory maximum of 1KiB is\nbeing set for the pipeline. However, the actual advisory\nbuffering level is the _sum_ of `highWaterMark` values, since\neach one has its own bucket.\n\nConsider the Minipass case:\n\n```js\nconst m1 = new Minipass()\nconst m2 = new Minipass()\nconst m3 = new Minipass()\nconst m4 = new Minipass()\n\nm1.pipe(m2).pipe(m3).pipe(m4)\nm4.on('data', () => console.log('made it through'))\n\n// m1 is flowing, so it writes the data to m2 immediately\n// m2 is flowing, so it writes the data to m3 immediately\n// m3 is flowing, so it writes the data to m4 immediately\n// m4 is flowing, so it fires the 'data' event immediately, returns true\n// m4's write returned true, so m3 is still flowing, returns true\n// m3's write returned true, so m2 is still flowing, returns true\n// m2's write returned true, so m1 is still flowing, returns true\n// No event deferrals or buffering along the way!\n\nm1.write(Buffer.alloc(2048)) // returns true\n```\n\nIt is extremely unlikely that you _don't_ want to buffer any data\nwritten, or _ever_ buffer data that can be flushed all the way\nthrough. Neither node-core streams nor Minipass ever fail to\nbuffer written data, but node-core streams do a lot of\nunnecessary buffering and pausing.\n\nAs always, the faster implementation is the one that does less\nstuff and waits less time to do it.\n\n### Immediately emit `end` for empty streams (when not paused)\n\nIf a stream is not paused, and `end()` is called before writing\nany data into it, then it will emit `end` immediately.\n\nIf you have logic that occurs on the `end` event which you don't\nwant to potentially happen immediately (for example, closing file\ndescriptors, moving on to the next entry in an archive parse\nstream, etc.) then be sure to call `stream.pause()` on creation,\nand then `stream.resume()` once you are ready to respond to the\n`end` event.\n\nHowever, this is _usually_ not a problem because:\n\n### Emit `end` When Asked\n\nOne hazard of immediately emitting `'end'` is that you may not\nyet have had a chance to add a listener. In order to avoid this\nhazard, Minipass streams safely re-emit the `'end'` event if a\nnew listener is added after `'end'` has been emitted.\n\nIe, if you do `stream.on('end', someFunction)`, and the stream\nhas already emitted `end`, then it will call the handler right\naway. (You can think of this somewhat like attaching a new\n`.then(fn)` to a previously-resolved Promise.)\n\nTo prevent calling handlers multiple times who would not expect\nmultiple ends to occur, all listeners are removed from the\n`'end'` event whenever it is emitted.\n\n### Emit `error` When Asked\n\nThe most recent error object passed to the `'error'` event is\nstored on the stream. If a new `'error'` event handler is added,\nand an error was previously emitted, then the event handler will\nbe called immediately (or on `process.nextTick` in the case of\nasync streams).\n\nThis makes it much more difficult to end up trying to interact\nwith a broken stream, if the error handler is added after an\nerror was previously emitted.\n\n### Impact of \"immediate flow\" on Tee-streams\n\nA \"tee stream\" is a stream piping to multiple destinations:\n\n```js\nconst tee = new Minipass()\nt.pipe(dest1)\nt.pipe(dest2)\nt.write('foo') // goes to both destinations\n```\n\nSince Minipass streams _immediately_ process any pending data\nthrough the pipeline when a new pipe destination is added, this\ncan have surprising effects, especially when a stream comes in\nfrom some other function and may or may not have data in its\nbuffer.\n\n```js\n// WARNING! WILL LOSE DATA!\nconst src = new Minipass()\nsrc.write('foo')\nsrc.pipe(dest1) // 'foo' chunk flows to dest1 immediately, and is gone\nsrc.pipe(dest2) // gets nothing!\n```\n\nOne solution is to create a dedicated tee-stream junction that\npipes to both locations, and then pipe to _that_ instead.\n\n```js\n// Safe example: tee to both places\nconst src = new Minipass()\nsrc.write('foo')\nconst tee = new Minipass()\ntee.pipe(dest1)\ntee.pipe(dest2)\nsrc.pipe(tee) // tee gets 'foo', pipes to both locations\n```\n\nThe same caveat applies to `on('data')` event listeners. The\nfirst one added will _immediately_ receive all of the data,\nleaving nothing for the second:\n\n```js\n// WARNING! WILL LOSE DATA!\nconst src = new Minipass()\nsrc.write('foo')\nsrc.on('data', handler1) // receives 'foo' right away\nsrc.on('data', handler2) // nothing to see here!\n```\n\nUsing a dedicated tee-stream can be used in this case as well:\n\n```js\n// Safe example: tee to both data handlers\nconst src = new Minipass()\nsrc.write('foo')\nconst tee = new Minipass()\ntee.on('data', handler1)\ntee.on('data', handler2)\nsrc.pipe(tee)\n```\n\nAll of the hazards in this section are avoided by setting `{\nasync: true }` in the Minipass constructor, or by setting\n`stream.async = true` afterwards. Note that this does add some\noverhead, so should only be done in cases where you are willing\nto lose a bit of performance in order to avoid having to refactor\nprogram logic.\n\n## USAGE\n\nIt's a stream! Use it like a stream and it'll most likely do what\nyou want.\n\n```js\nimport { Minipass } from 'minipass'\nconst mp = new Minipass(options) // options is optional\nmp.write('foo')\nmp.pipe(someOtherStream)\nmp.end('bar')\n```\n\n### OPTIONS\n\n- `encoding` How would you like the data coming _out_ of the\n  stream to be encoded? Accepts any values that can be passed to\n  `Buffer.toString()`.\n- `objectMode` Emit data exactly as it comes in. This will be\n  flipped on by default if you write() something other than a\n  string or Buffer at any point. Setting `objectMode: true` will\n  prevent setting any encoding value.\n- `async` Defaults to `false`. Set to `true` to defer data\n  emission until next tick. This reduces performance slightly,\n  but makes Minipass streams use timing behavior closer to Node\n  core streams. See [Timing](#timing) for more details.\n- `signal` An `AbortSignal` that will cause the stream to unhook\n  itself from everything and become as inert as possible. Note\n  that providing a `signal` parameter will make `'error'` events\n  no longer throw if they are unhandled, but they will still be\n  emitted to handlers if any are attached.\n\n### API\n\nImplements the user-facing portions of Node.js's `Readable` and\n`Writable` streams.\n\n### Methods\n\n- `write(chunk, [encoding], [callback])` - Put data in. (Note\n  that, in the base Minipass class, the same data will come out.)\n  Returns `false` if the stream will buffer the next write, or\n  true if it's still in \"flowing\" mode.\n- `end([chunk, [encoding]], [callback])` - Signal that you have\n  no more data to write. This will queue an `end` event to be\n  fired when all the data has been consumed.\n- `pause()` - No more data for a while, please. This also\n  prevents `end` from being emitted for empty streams until the\n  stream is resumed.\n- `resume()` - Resume the stream. If there's data in the buffer,\n  it is all discarded. Any buffered events are immediately\n  emitted.\n- `pipe(dest)` - Send all output to the stream provided. When\n  data is emitted, it is immediately written to any and all pipe\n  destinations. (Or written on next tick in `async` mode.)\n- `unpipe(dest)` - Stop piping to the destination stream. This is\n  immediate, meaning that any asynchronously queued data will\n  _not_ make it to the destination when running in `async` mode.\n  - `options.end` - Boolean, end the destination stream when the\n    source stream ends. Default `true`.\n  - `options.proxyErrors` - Boolean, proxy `error` events from\n    the source stream to the destination stream. Note that errors\n    are _not_ proxied after the pipeline terminates, either due\n    to the source emitting `'end'` or manually unpiping with\n    `src.unpipe(dest)`. Default `false`.\n- `on(ev, fn)`, `emit(ev, fn)` - Minipass streams are\n  EventEmitters. Some events are given special treatment,\n  however. (See below under \"events\".)\n- `promise()` - Returns a Promise that resolves when the stream\n  emits `end`, or rejects if the stream emits `error`.\n- `collect()` - Return a Promise that resolves on `end` with an\n  array containing each chunk of data that was emitted, or\n  rejects if the stream emits `error`. Note that this consumes\n  the stream data.\n- `concat()` - Same as `collect()`, but concatenates the data\n  into a single Buffer object. Will reject the returned promise\n  if the stream is in objectMode, or if it goes into objectMode\n  by the end of the data.\n- `read(n)` - Consume `n` bytes of data out of the buffer. If `n`\n  is not provided, then consume all of it. If `n` bytes are not\n  available, then it returns null. **Note** consuming streams in\n  this way is less efficient, and can lead to unnecessary Buffer\n  copying.\n- `destroy([er])` - Destroy the stream. If an error is provided,\n  then an `'error'` event is emitted. If the stream has a\n  `close()` method, and has not emitted a `'close'` event yet,\n  then `stream.close()` will be called. Any Promises returned by\n  `.promise()`, `.collect()` or `.concat()` will be rejected.\n  After being destroyed, writing to the stream will emit an\n  error. No more data will be emitted if the stream is destroyed,\n  even if it was previously buffered.\n\n### Properties\n\n- `bufferLength` Read-only. Total number of bytes buffered, or in\n  the case of objectMode, the total number of objects.\n- `encoding` Read-only. The encoding that has been set.\n- `flowing` Read-only. Boolean indicating whether a chunk written\n  to the stream will be immediately emitted.\n- `emittedEnd` Read-only. Boolean indicating whether the end-ish\n  events (ie, `end`, `prefinish`, `finish`) have been emitted.\n  Note that listening on any end-ish event will immediateyl\n  re-emit it if it has already been emitted.\n- `writable` Whether the stream is writable. Default `true`. Set\n  to `false` when `end()`\n- `readable` Whether the stream is readable. Default `true`.\n- `pipes` An array of Pipe objects referencing streams that this\n  stream is piping into.\n- `destroyed` A getter that indicates whether the stream was\n  destroyed.\n- `paused` True if the stream has been explicitly paused,\n  otherwise false.\n- `objectMode` Indicates whether the stream is in `objectMode`.\n- `aborted` Readonly property set when the `AbortSignal`\n  dispatches an `abort` event.\n\n### Events\n\n- `data` Emitted when there's data to read. Argument is the data\n  to read. This is never emitted while not flowing. If a listener\n  is attached, that will resume the stream.\n- `end` Emitted when there's no more data to read. This will be\n  emitted immediately for empty streams when `end()` is called.\n  If a listener is attached, and `end` was already emitted, then\n  it will be emitted again. All listeners are removed when `end`\n  is emitted.\n- `prefinish` An end-ish event that follows the same logic as\n  `end` and is emitted in the same conditions where `end` is\n  emitted. Emitted after `'end'`.\n- `finish` An end-ish event that follows the same logic as `end`\n  and is emitted in the same conditions where `end` is emitted.\n  Emitted after `'prefinish'`.\n- `close` An indication that an underlying resource has been\n  released. Minipass does not emit this event, but will defer it\n  until after `end` has been emitted, since it throws off some\n  stream libraries otherwise.\n- `drain` Emitted when the internal buffer empties, and it is\n  again suitable to `write()` into the stream.\n- `readable` Emitted when data is buffered and ready to be read\n  by a consumer.\n- `resume` Emitted when stream changes state from buffering to\n  flowing mode. (Ie, when `resume` is called, `pipe` is called,\n  or a `data` event listener is added.)\n\n### Static Methods\n\n- `Minipass.isStream(stream)` Returns `true` if the argument is a\n  stream, and false otherwise. To be considered a stream, the\n  object must be either an instance of Minipass, or an\n  EventEmitter that has either a `pipe()` method, or both\n  `write()` and `end()` methods. (Pretty much any stream in\n  node-land will return `true` for this.)\n\n## EXAMPLES\n\nHere are some examples of things you can do with Minipass\nstreams.\n\n### simple \"are you done yet\" promise\n\n```js\nmp.promise().then(\n  () => {\n    // stream is finished\n  },\n  er => {\n    // stream emitted an error\n  }\n)\n```\n\n### collecting\n\n```js\nmp.collect().then(all => {\n  // all is an array of all the data emitted\n  // encoding is supported in this case, so\n  // so the result will be a collection of strings if\n  // an encoding is specified, or buffers/objects if not.\n  //\n  // In an async function, you may do\n  // const data = await stream.collect()\n})\n```\n\n### collecting into a single blob\n\nThis is a bit slower because it concatenates the data into one\nchunk for you, but if you're going to do it yourself anyway, it's\nconvenient this way:\n\n```js\nmp.concat().then(onebigchunk => {\n  // onebigchunk is a string if the stream\n  // had an encoding set, or a buffer otherwise.\n})\n```\n\n### iteration\n\nYou can iterate over streams synchronously or asynchronously in\nplatforms that support it.\n\nSynchronous iteration will end when the currently available data\nis consumed, even if the `end` event has not been reached. In\nstring and buffer mode, the data is concatenated, so unless\nmultiple writes are occurring in the same tick as the `read()`,\nsync iteration loops will generally only have a single iteration.\n\nTo consume chunks in this way exactly as they have been written,\nwith no flattening, create the stream with the `{ objectMode:\ntrue }` option.\n\n```js\nconst mp = new Minipass({ objectMode: true })\nmp.write('a')\nmp.write('b')\nfor (let letter of mp) {\n  console.log(letter) // a, b\n}\nmp.write('c')\nmp.write('d')\nfor (let letter of mp) {\n  console.log(letter) // c, d\n}\nmp.write('e')\nmp.end()\nfor (let letter of mp) {\n  console.log(letter) // e\n}\nfor (let letter of mp) {\n  console.log(letter) // nothing\n}\n```\n\nAsynchronous iteration will continue until the end event is reached,\nconsuming all of the data.\n\n```js\nconst mp = new Minipass({ encoding: 'utf8' })\n\n// some source of some data\nlet i = 5\nconst inter = setInterval(() => {\n  if (i-- > 0) mp.write(Buffer.from('foo\\n', 'utf8'))\n  else {\n    mp.end()\n    clearInterval(inter)\n  }\n}, 100)\n\n// consume the data with asynchronous iteration\nasync function consume() {\n  for await (let chunk of mp) {\n    console.log(chunk)\n  }\n  return 'ok'\n}\n\nconsume().then(res => console.log(res))\n// logs `foo\\n` 5 times, and then `ok`\n```\n\n### subclass that `console.log()`s everything written into it\n\n```js\nclass Logger extends Minipass {\n  write(chunk, encoding, callback) {\n    console.log('WRITE', chunk, encoding)\n    return super.write(chunk, encoding, callback)\n  }\n  end(chunk, encoding, callback) {\n    console.log('END', chunk, encoding)\n    return super.end(chunk, encoding, callback)\n  }\n}\n\nsomeSource.pipe(new Logger()).pipe(someDest)\n```\n\n### same thing, but using an inline anonymous class\n\n```js\n// js classes are fun\nsomeSource\n  .pipe(\n    new (class extends Minipass {\n      emit(ev, ...data) {\n        // let's also log events, because debugging some weird thing\n        console.log('EMIT', ev)\n        return super.emit(ev, ...data)\n      }\n      write(chunk, encoding, callback) {\n        console.log('WRITE', chunk, encoding)\n        return super.write(chunk, encoding, callback)\n      }\n      end(chunk, encoding, callback) {\n        console.log('END', chunk, encoding)\n        return super.end(chunk, encoding, callback)\n      }\n    })()\n  )\n  .pipe(someDest)\n```\n\n### subclass that defers 'end' for some reason\n\n```js\nclass SlowEnd extends Minipass {\n  emit(ev, ...args) {\n    if (ev === 'end') {\n      console.log('going to end, hold on a sec')\n      setTimeout(() => {\n        console.log('ok, ready to end now')\n        super.emit('end', ...args)\n      }, 100)\n      return true\n    } else {\n      return super.emit(ev, ...args)\n    }\n  }\n}\n```\n\n### transform that creates newline-delimited JSON\n\n```js\nclass NDJSONEncode extends Minipass {\n  write(obj, cb) {\n    try {\n      // JSON.stringify can throw, emit an error on that\n      return super.write(JSON.stringify(obj) + '\\n', 'utf8', cb)\n    } catch (er) {\n      this.emit('error', er)\n    }\n  }\n  end(obj, cb) {\n    if (typeof obj === 'function') {\n      cb = obj\n      obj = undefined\n    }\n    if (obj !== undefined) {\n      this.write(obj)\n    }\n    return super.end(cb)\n  }\n}\n```\n\n### transform that parses newline-delimited JSON\n\n```js\nclass NDJSONDecode extends Minipass {\n  constructor(options) {\n    // always be in object mode, as far as Minipass is concerned\n    super({ objectMode: true })\n    this._jsonBuffer = ''\n  }\n  write(chunk, encoding, cb) {\n    if (\n      typeof chunk === 'string' &&\n      typeof encoding === 'string' &&\n      encoding !== 'utf8'\n    ) {\n      chunk = Buffer.from(chunk, encoding).toString()\n    } else if (Buffer.isBuffer(chunk)) {\n      chunk = chunk.toString()\n    }\n    if (typeof encoding === 'function') {\n      cb = encoding\n    }\n    const jsonData = (this._jsonBuffer + chunk).split('\\n')\n    this._jsonBuffer = jsonData.pop()\n    for (let i = 0; i < jsonData.length; i++) {\n      try {\n        // JSON.parse can throw, emit an error on that\n        super.write(JSON.parse(jsonData[i]))\n      } catch (er) {\n        this.emit('error', er)\n        continue\n      }\n    }\n    if (cb) cb()\n  }\n}\n```",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{07/98/11eb236218c74fbb9e9323ce553efe6262d1ccaee0773d873ca5f6d11c21fb5ed011b5be0dc8fcee46923a64c33aa020ee73c92b9767d87db505ed0b3db4 → df/8c/2b6b1e901d20e527e18dcb8345352ebb23e3ba0d67fe6a5e017ecfbb79d6aeadf507632f86dee722a50ebd95348267a20e8e111ac48c7de0bc465bf6ae01}

@@ -7056,12 +7056,121 @@
       },
       "_hasShrinkwrap": false,
       "contributors": []
+    },
+    "4.4.5": {
+      "name": "@smithy/node-http-handler",
+      "version": "4.4.5",
+      "description": "Provides a way to make requests",
+      "scripts": {
+        "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types && yarn build:types:downlevel'",
+        "build:cjs": "node ../../scripts/inline node-http-handler",
+        "build:es": "yarn g:tsc -p tsconfig.es.json",
+        "build:types": "yarn g:tsc -p tsconfig.types.json",
+        "build:types:downlevel": "rimraf dist-types/ts3.4 && downlevel-dts dist-types dist-types/ts3.4",
+        "stage-release": "rimraf ./.release && yarn pack && mkdir ./.release && tar zxvf ./package.tgz --directory ./.release && rm ./package.tgz",
+        "clean": "rimraf ./dist-* && rimraf *.tsbuildinfo || exit 0",
+        "lint": "eslint -c ../../.eslintrc.js \"src/**/*.ts\"",
+        "format": "prettier --config ../../prettier.config.js --ignore-path ../../.prettierignore --write \"**/*.{ts,md,json}\"",
+        "extract:docs": "api-extractor run --local",
+        "test": "yarn g:vitest run",
+        "test:watch": "yarn g:vitest watch"
+      },
+      "author": {
+        "name": "AWS SDK for JavaScript Team",
+        "url": "https://aws.amazon.com/javascript/"
+      },
+      "license": "Apache-2.0",
+      "sideEffects": false,
+      "main": "./dist-cjs/index.js",
+      "module": "./dist-es/index.js",
+      "types": "./dist-types/index.d.ts",
+      "dependencies": {
+        "@smithy/abort-controller": "^4.2.5",
+        "@smithy/protocol-http": "^5.3.5",
+        "@smithy/querystring-builder": "^4.2.5",
+        "@smithy/types": "^4.9.0",
+        "tslib": "^2.6.2"
+      },
+      "devDependencies": {
+        "@types/node": "^18.11.9",
+        "concurrently": "7.0.0",
+        "downlevel-dts": "0.10.1",
+        "rimraf": "3.0.2",
+        "typedoc": "0.23.23"
+      },
+      "engines": {
+        "node": ">=18.0.0"
+      },
+      "typesVersions": {
+        "<4.0": {
+          "dist-types/*": [
+            "dist-types/ts3.4/*"
+          ]
+        }
+      },
+      "homepage": "https://github.com/smithy-lang/smithy-typescript/tree/main/packages/node-http-handler",
+      "repository": {
+        "type": "git",
+        "url": "git+https://github.com/smithy-lang/smithy-typescript.git",
+        "directory": "packages/node-http-handler"
+      },
+      "typedoc": {
+        "entryPoint": "src/index.ts"
+      },
+      "publishConfig": {
+        "directory": ".release/package"
+      },
+      "_id": "@smithy/node-http-handler@4.4.5",
+      "gitHead": "cc0124e69e2d6943f0960854bcc3abf2defd2c20",
+      "bugs": {
+        "url": "https://github.com/smithy-lang/smithy-typescript/issues"
+      },
+      "_nodeVersion": "18.20.8",
+      "_npmVersion": "10.8.2",
+      "dist": {
+        "integrity": "sha512-CMnzM9R2WqlqXQGtIlsHMEZfXKJVTIrqCNoSd/QpAyp+Dw0a1Vps13l6ma1fH8g7zSPNsA59B/kWgeylFuA/lw==",
+        "shasum": "2aea598fdf3dc4e32667d673d48abd4a073665f4",
+        "tarball": "https://verdaccio.mrsdev.ru/@smithy%2fnode-http-handler/-/node-http-handler-4.4.5.tgz",
+        "fileCount": 58,
+        "unpackedSize": 97235,
+        "signatures": [
+          {
+            "keyid": "SHA256:DhQ8wR5APBvFHLF/+Tc+AYvPOdTpcIDqOhxsBHRwC7U",
+            "sig": "MEQCIB0Z1vUye2rnMgl5RDocfHAYc+ZVHw5EeBpfwspr0SRfAiBpwQUh7aWMQFUJWKB0U5ssf2hepwP40gEfUBDsCIO8sQ=="
+          }
+        ]
+      },
+      "_npmUser": {
+        "name": "smithy-team",
+        "email": "aws-javascript-sdk-team+npm@amazon.com"
+      },
+      "directories": {},
+      "maintainers": [
+        {
+          "name": "trivikr-aws",
+          "email": "trivikr@amazon.com"
+        },
+        {
+          "name": "smithy-team",
+          "email": "aws-javascript-sdk-team+npm@amazon.com"
+        },
+        {
+          "name": "aws-sdk-bot",
+          "email": "aws-sdk-js-automation@amazon.com"
+        }
+      ],
+      "_npmOperationalInternal": {
+        "host": "s3://npm-registry-packages-npm-production",
+        "tmp": "tmp/node-http-handler_4.4.5_1762805592663_0.6945024109003606"
+      },
+      "_hasShrinkwrap": false,
+      "contributors": []
     }
   },
   "time": {
     "created": "2023-06-19T22:00:46.278Z",
     "1.0.0": "2023-06-19T22:00:46.520Z",
-    "modified": "2025-10-30T15:42:49.679Z",
+    "modified": "2025-11-10T20:13:13.111Z",
     "1.0.1": "2023-06-20T19:26:40.007Z",
     "1.0.2": "2023-06-27T22:54:42.088Z",
     "1.0.3": "2023-07-06T16:24:44.217Z",
@@ -7127,13 +7236,14 @@
     "4.4.1": "2025-10-14T14:36:31.146Z",
     "4.4.2": "2025-10-15T19:43:20.775Z",
     "4.4.3": "2025-10-22T20:09:45.322Z",
-    "4.4.4": "2025-10-30T15:42:49.445Z"
+    "4.4.4": "2025-10-30T15:42:49.445Z",
+    "4.4.5": "2025-11-10T20:13:12.892Z"
   },
   "users": {},
   "dist-tags": {
-    "latest": "4.4.4"
+    "latest": "4.4.5"
   },
-  "_rev": "119-6c73bebc13485626",
+  "_rev": "125-d37336fd979dc671",
   "_id": "@smithy/node-http-handler",
   "readme": "# @smithy/node-http-handler\n\n[![NPM version](https://img.shields.io/npm/v/@smithy/node-http-handler/latest.svg)](https://www.npmjs.com/package/@smithy/node-http-handler)\n[![NPM downloads](https://img.shields.io/npm/dm/@smithy/node-http-handler.svg)](https://www.npmjs.com/package/@smithy/node-http-handler)\n\nThis package implements the default `requestHandler` for Node.js using `node:http`, `node:https`, and `node:http2`.\n\nFor an example on how `requestHandler`s are used by Smithy generated SDK clients, refer to\nthe [AWS SDK for JavaScript (v3) supplemental docs](https://github.com/aws/aws-sdk-js-v3/blob/main/supplemental-docs/CLIENTS.md#request-handler-requesthandler).",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{68/ce/66f149ffc57151f974a983dc93571c91d69870e5ab5bc1312b319deee7b0611446f3a1bbd589a3a9c665aefb63e0a6625f549fc4ebf4f5483aa6b083c544 → df/d6/5384317dab95ddc46a84d8b76e2967831ea5042dd2eddc2e796112ce6506f9a6968ad81f9ff96292fef240500da425d278eda6a1afeb9da15179bdd0871d}

@@ -1740,7 +1740,7 @@
   "dist-tags": {
     "latest": "5.2.0"
   },
-  "_rev": "204-3359d1e5ac011f35",
+  "_rev": "209-0c370f2c35a61272",
   "_id": "@aws-crypto/crc32",
   "readme": "# @aws-crypto/crc32\n\nPure JS implementation of CRC32 https://en.wikipedia.org/wiki/Cyclic_redundancy_check\n\n## Usage\n\n```\nimport { Crc32 } from '@aws-crypto/crc32';\n\nconst crc32Digest = (new Crc32).update(buffer).digest()\n\n```\n\n## Test\n\n`npm test`",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{88/3e/5de63f4fbf7f17704c99905367bc49528d12051c5ebe2ddb31e0f124e7e7884b2c3771c86d9f2903841821d34f9bf6e9ade18c3f03e18152da1a57b24f98 → e0/20/b6b0cff0d738d292b8cdfa41d5ceff860f30a249e0121707416627d7f87ae9524dfb520d865e7b4a466a9e7d9bc536570ab00e09bf1dbf9b5be5121caeef}

@@ -165,7 +165,7 @@
   "dist-tags": {
     "latest": "1.0.2"
   },
-  "_rev": "1605-e58bfbe1504d315e",
+  "_rev": "1618-6be0adae8069a618",
   "_id": "util-deprecate",
   "readme": "util-deprecate\n==============\n### The Node.js `util.deprecate()` function with browser support\n\nIn Node.js, this module simply re-exports the `util.deprecate()` function.\n\nIn the web browser (i.e. via browserify), a browser-specific implementation\nof the `util.deprecate()` function is used.\n\n\n## API\n\nA `deprecate()` function is the only thing exposed by this module.\n\n``` javascript\n// setup:\nexports.foo = deprecate(foo, 'foo() is deprecated, use bar() instead');\n\n\n// users see:\nfoo();\n// foo() is deprecated, use bar() instead\nfoo();\nfoo();\n```\n\n\n## License\n\n(The MIT License)\n\nCopyright (c) 2014 Nathan Rajlich <nathan@tootallnate.net>\n\nPermission is hereby granted, free of charge, to any person\nobtaining a copy of this software and associated documentation\nfiles (the \"Software\"), to deal in the Software without\nrestriction, including without limitation the rights to use,\ncopy, modify, merge, publish, distribute, sublicense, and/or sell\ncopies of the Software, and to permit persons to whom the\nSoftware is furnished to do so, subject to the following\nconditions:\n\nThe above copyright notice and this permission notice shall be\nincluded in all copies or substantial portions of the Software.\n\nTHE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND,\nEXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES\nOF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND\nNONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT\nHOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,\nWHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING\nFROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR\nOTHER DEALINGS IN THE SOFTWARE.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{8c/3b/f81049d545afd523a0264c080243f9d49a5de7d0efce4eadc66f37d5f3943a9eba67482dcdbce6f92c102f3021884c65b1ffb29eb9ea20f7985f2fce5944 → e0/cb/b1745de45d9063eb781d35ee335adacc84a43bd026a9a788eada8bcc55a03218b0f1c90fb0e94590885fa9a4e6c46cda3f46ed7a19f0a981643a4353c208}

@@ -17445,7 +17445,7 @@
     "latest": "3.922.0",
     "rc": "1.0.0-rc.10"
   },
-  "_rev": "228-6ee3f177f8e1b9ad",
+  "_rev": "233-c389b4fec9481ebb",
   "_id": "@aws-sdk/middleware-logger",
   "readme": "# @aws-sdk/middleware-logger\n\n[![NPM version](https://img.shields.io/npm/v/@aws-sdk/middleware-logger/latest.svg)](https://www.npmjs.com/package/@aws-sdk/middleware-logger)\n[![NPM downloads](https://img.shields.io/npm/dm/@aws-sdk/middleware-logger.svg)](https://www.npmjs.com/package/@aws-sdk/middleware-logger)",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{dd/d2/fbaf6bbe62ad5f2241d318fa3f7de9b79b68641b16bd0f11ce7a02de08a2097e864a69ac3c450dc80042fd3f9b283fb9c70ecdee600ca0f46770c4e829d9 → e1/25/449fdb46d381db21306384f2454a05e87a5cf9105dfa457b19b9c8bbad587f78b8f21f69b185e98a68cfb8c277810df409892945f51b57897d09f0abb215}

@@ -9166,7 +9166,7 @@
     }
   },
   "time": {
-    "modified": "2025-11-10T01:56:20.524Z",
+    "modified": "2025-11-10T22:50:44.625Z",
     "created": "2012-04-23T16:37:11.912Z",
     "0.1.0": "2012-04-23T16:37:12.603Z",
     "0.2.0": "2012-05-22T04:06:24.044Z",
@@ -9287,7 +9287,7 @@
   "dist-tags": {
     "latest": "4.17.21"
   },
-  "_rev": "2367-75ef011246e5d6fa",
+  "_rev": "2380-81420e3f71bfb0ec",
   "_id": "lodash",
   "readme": "# lodash v4.17.21\n\nThe [Lodash](https://lodash.com/) library exported as [Node.js](https://nodejs.org/) modules.\n\n## Installation\n\nUsing npm:\n```shell\n$ npm i -g npm\n$ npm i --save lodash\n```\n\nIn Node.js:\n```js\n// Load the full build.\nvar _ = require('lodash');\n// Load the core build.\nvar _ = require('lodash/core');\n// Load the FP build for immutable auto-curried iteratee-first data-last methods.\nvar fp = require('lodash/fp');\n\n// Load method categories.\nvar array = require('lodash/array');\nvar object = require('lodash/fp/object');\n\n// Cherry-pick methods for smaller browserify/rollup/webpack bundles.\nvar at = require('lodash/at');\nvar curryN = require('lodash/fp/curryN');\n```\n\nSee the [package source](https://github.com/lodash/lodash/tree/4.17.21-npm) for more details.\n\n**Note:**<br>\nInstall [n_](https://www.npmjs.com/package/n_) for Lodash use in the Node.js < 6 REPL.\n\n## Support\n\nTested in Chrome 74-75, Firefox 66-67, IE 11, Edge 18, Safari 11-12, & Node.js 8-12.<br>\nAutomated [browser](https://saucelabs.com/u/lodash) & [CI](https://travis-ci.org/lodash/lodash/) test runs are available.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{8c/62/470d3f07b3be4a06ded6da6292a6a2b69517d197cbe621e3dd886d9e908de0fa5c370a8be5cb18524425b76f08cead0e05e7160d7a0480b3543997ca66f3 → e1/68/2746641b285704bfdddaee093dbf4bdf3e6c637ac8e018e5e91adf78d3c3a83101b22b7b30d6982eb12a0a530231fcc2628890102216b62dc29dea9c1891}

@@ -289,7 +289,7 @@
   "dist-tags": {
     "latest": "2.0.0"
   },
-  "_rev": "2337-f323b986959e1bc7",
+  "_rev": "2367-65abbe3a38787a2f",
   "_id": "shebang-command",
   "readme": "# shebang-command [![Build Status](https://travis-ci.org/kevva/shebang-command.svg?branch=master)](https://travis-ci.org/kevva/shebang-command)\n\n> Get the command from a shebang\n\n\n## Install\n\n```\n$ npm install shebang-command\n```\n\n\n## Usage\n\n```js\nconst shebangCommand = require('shebang-command');\n\nshebangCommand('#!/usr/bin/env node');\n//=> 'node'\n\nshebangCommand('#!/bin/bash');\n//=> 'bash'\n```\n\n\n## API\n\n### shebangCommand(string)\n\n#### string\n\nType: `string`\n\nString containing a shebang.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{39/92/d5100d9d4fc070600edbbc78eb787be74f8cecfd7a68fc8d9e9ea366b657bf902ccf837ad0c351cd1db3683d7c403f7190a7023bbb756929fbd93a133117 → e4/78/340b48d2402655043532b8492f119a3e7856ba94ae3d0fb095018af77c730d310a396e70943942ab343217a592a5e80a754968d38cc97899a7ccb278382b}

@@ -17994,7 +17994,7 @@
     "gamma": "1.0.0-gamma.8",
     "rc": "1.0.0-rc.10"
   },
-  "_rev": "220-03149c1b7506dde9",
+  "_rev": "225-8030b49756156bf8",
   "_id": "@aws-sdk/middleware-ssec",
   "readme": "# @aws-sdk/middleware-ssec\n\n[![NPM version](https://img.shields.io/npm/v/@aws-sdk/middleware-ssec/latest.svg)](https://www.npmjs.com/package/@aws-sdk/middleware-ssec)\n[![NPM downloads](https://img.shields.io/npm/dm/@aws-sdk/middleware-ssec.svg)](https://www.npmjs.com/package/@aws-sdk/middleware-ssec)",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{ac/54/18d9169386ef8e94e92496bf5aeca2b5785577705e29edb35c135df081f83fd69794bdc778eb941c9f2e9bbe82397e8ce170d42c7834c4640414b664f44d → f6/1c/9993b3bd7f014a47473e5fb2b34a2ac6dd2ef91a9381d1e3d330ed799627be4aff150d123ff954801fa8ae203c0cac83c1a2892af7f85e9f204892ce285f}

@@ -12998,12 +12998,123 @@
       },
       "_hasShrinkwrap": false,
       "contributors": []
+    },
+    "4.9.3": {
+      "name": "@smithy/smithy-client",
+      "version": "4.9.3",
+      "scripts": {
+        "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types && yarn build:types:downlevel'",
+        "build:cjs": "node ../../scripts/inline smithy-client",
+        "build:es": "yarn g:tsc -p tsconfig.es.json",
+        "build:types": "yarn g:tsc -p tsconfig.types.json",
+        "build:types:downlevel": "rimraf dist-types/ts3.4 && downlevel-dts dist-types dist-types/ts3.4",
+        "stage-release": "rimraf ./.release && yarn pack && mkdir ./.release && tar zxvf ./package.tgz --directory ./.release && rm ./package.tgz",
+        "clean": "rimraf ./dist-* && rimraf *.tsbuildinfo || exit 0",
+        "lint": "eslint -c ../../.eslintrc.js \"src/**/*.ts\"",
+        "format": "prettier --config ../../prettier.config.js --ignore-path ../../.prettierignore --write \"**/*.{ts,md,json}\"",
+        "extract:docs": "node ./scripts/fix-api-extractor && api-extractor run --local && node ./scripts/fix-api-extractor --unset",
+        "test": "yarn g:vitest run",
+        "test:watch": "yarn g:vitest watch"
+      },
+      "main": "./dist-cjs/index.js",
+      "module": "./dist-es/index.js",
+      "types": "./dist-types/index.d.ts",
+      "author": {
+        "name": "AWS SDK for JavaScript Team",
+        "url": "https://aws.amazon.com/javascript/"
+      },
+      "license": "Apache-2.0",
+      "sideEffects": false,
+      "dependencies": {
+        "@smithy/core": "^3.18.0",
+        "@smithy/middleware-endpoint": "^4.3.7",
+        "@smithy/middleware-stack": "^4.2.5",
+        "@smithy/protocol-http": "^5.3.5",
+        "@smithy/types": "^4.9.0",
+        "@smithy/util-stream": "^4.5.6",
+        "tslib": "^2.6.2"
+      },
+      "engines": {
+        "node": ">=18.0.0"
+      },
+      "typesVersions": {
+        "<4.0": {
+          "dist-types/*": [
+            "dist-types/ts3.4/*"
+          ]
+        }
+      },
+      "homepage": "https://github.com/smithy-lang/smithy-typescript/tree/main/packages/smithy-client",
+      "repository": {
+        "type": "git",
+        "url": "git+https://github.com/smithy-lang/smithy-typescript.git",
+        "directory": "packages/smithy-client"
+      },
+      "devDependencies": {
+        "@types/node": "^18.11.9",
+        "concurrently": "7.0.0",
+        "downlevel-dts": "0.10.1",
+        "rimraf": "3.0.2",
+        "typedoc": "0.23.23"
+      },
+      "typedoc": {
+        "entryPoint": "src/index.ts"
+      },
+      "publishConfig": {
+        "directory": ".release/package"
+      },
+      "_id": "@smithy/smithy-client@4.9.3",
+      "gitHead": "cc0124e69e2d6943f0960854bcc3abf2defd2c20",
+      "description": "[![NPM version](https://img.shields.io/npm/v/@smithy/smithy-client/latest.svg)](https://www.npmjs.com/package/@smithy/smithy-client) [![NPM downloads](https://img.shields.io/npm/dm/@smithy/smithy-client.svg)](https://www.npmjs.com/package/@smithy/smithy-c",
+      "bugs": {
+        "url": "https://github.com/smithy-lang/smithy-typescript/issues"
+      },
+      "_nodeVersion": "18.20.8",
+      "_npmVersion": "10.8.2",
+      "dist": {
+        "integrity": "sha512-8tlueuTgV5n7inQCkhyptrB3jo2AO80uGrps/XTYZivv5MFQKKBj3CIWIGMI2fRY5LEduIiazOhAWdFknY1O9w==",
+        "shasum": "1c347fb7ec2e7fd3d61b84d8affe97c87e4bca5d",
+        "tarball": "https://verdaccio.mrsdev.ru/@smithy%2fsmithy-client/-/smithy-client-4.9.3.tgz",
+        "fileCount": 76,
+        "unpackedSize": 104309,
+        "signatures": [
+          {
+            "keyid": "SHA256:DhQ8wR5APBvFHLF/+Tc+AYvPOdTpcIDqOhxsBHRwC7U",
+            "sig": "MEQCIFFn5ZTtEYz3qK+E0OtjlAiMVw56IT3pGDKbBcdN8sInAiAW3aA3YvBb2U2FH9d4LiNGa74reyCfOo39A38Yxrho5g=="
+          }
+        ]
+      },
+      "_npmUser": {
+        "name": "smithy-team",
+        "email": "aws-javascript-sdk-team+npm@amazon.com"
+      },
+      "directories": {},
+      "maintainers": [
+        {
+          "name": "trivikr-aws",
+          "email": "trivikr@amazon.com"
+        },
+        {
+          "name": "smithy-team",
+          "email": "aws-javascript-sdk-team+npm@amazon.com"
+        },
+        {
+          "name": "aws-sdk-bot",
+          "email": "aws-sdk-js-automation@amazon.com"
+        }
+      ],
+      "_npmOperationalInternal": {
+        "host": "s3://npm-registry-packages-npm-production",
+        "tmp": "tmp/smithy-client_4.9.3_1762805594379_0.8957583557661033"
+      },
+      "_hasShrinkwrap": false,
+      "contributors": []
     }
   },
   "time": {
     "created": "2023-06-19T22:00:51.466Z",
     "1.0.0": "2023-06-19T22:00:51.728Z",
-    "modified": "2025-10-30T15:42:52.205Z",
+    "modified": "2025-11-10T20:13:14.763Z",
     "1.0.1": "2023-06-20T19:26:43.826Z",
     "1.0.2": "2023-06-22T17:03:06.415Z",
     "1.0.3": "2023-06-27T22:54:42.048Z",
@@ -13124,13 +13235,14 @@
     "4.8.1": "2025-10-14T14:36:33.714Z",
     "4.9.0": "2025-10-15T19:43:23.530Z",
     "4.9.1": "2025-10-22T20:09:45.257Z",
-    "4.9.2": "2025-10-30T15:42:52.025Z"
+    "4.9.2": "2025-10-30T15:42:52.025Z",
+    "4.9.3": "2025-11-10T20:13:14.568Z"
   },
   "users": {},
   "dist-tags": {
-    "latest": "4.9.2"
+    "latest": "4.9.3"
   },
-  "_rev": "133-c49f4b8b021b0d4e",
+  "_rev": "139-125342ed419b1016",
   "_id": "@smithy/smithy-client",
   "readme": "# @smithy/smithy-client\n\n[![NPM version](https://img.shields.io/npm/v/@smithy/smithy-client/latest.svg)](https://www.npmjs.com/package/@smithy/smithy-client)\n[![NPM downloads](https://img.shields.io/npm/dm/@smithy/smithy-client.svg)](https://www.npmjs.com/package/@smithy/smithy-client)\n\n> An internal package\n\n## Usage\n\nYou probably shouldn't, at least directly.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{f0/4c/cfbdd2ef98b1b173e0750e02c1cf8e0aa0020583577b197c861ae1f23997bf36e8bb4005dc9da5f7de867f38fbd6bbb425b837a9e8babcc60ee86d8ef7ed → f6/5d/acd90fee9c275a2d343a31ca212be0dfe1a7e0d9ae2889c2ee0a0a25b27ea44084f48875f5c3624f526de08d140e3b5522f18f2ec7e56c2d9293c50409f3}

@@ -937,7 +937,7 @@
   "dist-tags": {
     "latest": "3.0.0"
   },
-  "_rev": "1954-c2da00d01ba14c67",
+  "_rev": "1967-7da337151e7acf14",
   "_id": "normalize-path",
   "readme": "# normalize-path [![NPM version](https://img.shields.io/npm/v/normalize-path.svg?style=flat)](https://www.npmjs.com/package/normalize-path) [![NPM monthly downloads](https://img.shields.io/npm/dm/normalize-path.svg?style=flat)](https://npmjs.org/package/normalize-path) [![NPM total downloads](https://img.shields.io/npm/dt/normalize-path.svg?style=flat)](https://npmjs.org/package/normalize-path) [![Linux Build Status](https://img.shields.io/travis/jonschlinkert/normalize-path.svg?style=flat&label=Travis)](https://travis-ci.org/jonschlinkert/normalize-path)\n\n> Normalize slashes in a file path to be posix/unix-like forward slashes. Also condenses repeat slashes to a single slash and removes and trailing slashes, unless disabled.\n\nPlease consider following this project's author, [Jon Schlinkert](https://github.com/jonschlinkert), and consider starring the project to show your :heart: and support.\n\n## Install\n\nInstall with [npm](https://www.npmjs.com/):\n\n```sh\n$ npm install --save normalize-path\n```\n\n## Usage\n\n```js\nconst normalize = require('normalize-path');\n\nconsole.log(normalize('\\\\foo\\\\bar\\\\baz\\\\')); \n//=> '/foo/bar/baz'\n```\n\n**win32 namespaces**\n\n```js\nconsole.log(normalize('\\\\\\\\?\\\\UNC\\\\Server01\\\\user\\\\docs\\\\Letter.txt')); \n//=> '//?/UNC/Server01/user/docs/Letter.txt'\n\nconsole.log(normalize('\\\\\\\\.\\\\CdRomX')); \n//=> '//./CdRomX'\n```\n\n**Consecutive slashes**\n\nCondenses multiple consecutive forward slashes (except for leading slashes in win32 namespaces) to a single slash.\n\n```js\nconsole.log(normalize('.//foo//bar///////baz/')); \n//=> './foo/bar/baz'\n```\n\n### Trailing slashes\n\nBy default trailing slashes are removed. Pass `false` as the last argument to disable this behavior and _**keep** trailing slashes_:\n\n```js\nconsole.log(normalize('foo\\\\bar\\\\baz\\\\', false)); //=> 'foo/bar/baz/'\nconsole.log(normalize('./foo/bar/baz/', false)); //=> './foo/bar/baz/'\n```\n\n## Release history\n\n### v3.0\n\nNo breaking changes in this release.\n\n* a check was added to ensure that [win32 namespaces](https://msdn.microsoft.com/library/windows/desktop/aa365247(v=vs.85).aspx#namespaces) are handled properly by win32 `path.parse()` after a path has been normalized by this library.\n* a minor optimization was made to simplify how the trailing separator was handled\n\n## About\n\n<details>\n<summary><strong>Contributing</strong></summary>\n\nPull requests and stars are always welcome. For bugs and feature requests, [please create an issue](../../issues/new).\n\n</details>\n\n<details>\n<summary><strong>Running Tests</strong></summary>\n\nRunning and reviewing unit tests is a great way to get familiarized with a library and its API. You can install dependencies and run tests with the following command:\n\n```sh\n$ npm install && npm test\n```\n\n</details>\n\n<details>\n<summary><strong>Building docs</strong></summary>\n\n_(This project's readme.md is generated by [verb](https://github.com/verbose/verb-generate-readme), please don't edit the readme directly. Any changes to the readme must be made in the [.verb.md](.verb.md) readme template.)_\n\nTo generate the readme, run the following command:\n\n```sh\n$ npm install -g verbose/verb#dev verb-generate-readme && verb\n```\n\n</details>\n\n### Related projects\n\nOther useful path-related libraries:\n\n* [contains-path](https://www.npmjs.com/package/contains-path): Return true if a file path contains the given path. | [homepage](https://github.com/jonschlinkert/contains-path \"Return true if a file path contains the given path.\")\n* [is-absolute](https://www.npmjs.com/package/is-absolute): Returns true if a file path is absolute. Does not rely on the path module… [more](https://github.com/jonschlinkert/is-absolute) | [homepage](https://github.com/jonschlinkert/is-absolute \"Returns true if a file path is absolute. Does not rely on the path module and can be used as a polyfill for node.js native `path.isAbolute`.\")\n* [is-relative](https://www.npmjs.com/package/is-relative): Returns `true` if the path appears to be relative. | [homepage](https://github.com/jonschlinkert/is-relative \"Returns `true` if the path appears to be relative.\")\n* [parse-filepath](https://www.npmjs.com/package/parse-filepath): Pollyfill for node.js `path.parse`, parses a filepath into an object. | [homepage](https://github.com/jonschlinkert/parse-filepath \"Pollyfill for node.js `path.parse`, parses a filepath into an object.\")\n* [path-ends-with](https://www.npmjs.com/package/path-ends-with): Return `true` if a file path ends with the given string/suffix. | [homepage](https://github.com/jonschlinkert/path-ends-with \"Return `true` if a file path ends with the given string/suffix.\")\n* [unixify](https://www.npmjs.com/package/unixify): Convert Windows file paths to unix paths. | [homepage](https://github.com/jonschlinkert/unixify \"Convert Windows file paths to unix paths.\")\n\n### Contributors\n\n| **Commits** | **Contributor** | \n| --- | --- |\n| 35 | [jonschlinkert](https://github.com/jonschlinkert) |\n| 1 | [phated](https://github.com/phated) |\n\n### Author\n\n**Jon Schlinkert**\n\n* [LinkedIn Profile](https://linkedin.com/in/jonschlinkert)\n* [GitHub Profile](https://github.com/jonschlinkert)\n* [Twitter Profile](https://twitter.com/jonschlinkert)\n\n### License\n\nCopyright © 2018, [Jon Schlinkert](https://github.com/jonschlinkert).\nReleased under the [MIT License](LICENSE).\n\n***\n\n_This file was generated by [verb-generate-readme](https://github.com/verbose/verb-generate-readme), v0.6.0, on April 19, 2018._",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{40/cb/9baf3235c489842eb9f5c48be41a7de25433527b196c607fd8858e632ca4b0bc8b60ce03872aba4444d507e5d07e29c0df272a165d76db8a5c60f353b3fd → f6/b6/5e91b35ed776a97bb217e0634a6433a004d2dea7cf62fe6d100588daa09a290c1960681abbfb1c534b7be19df52875f933eff6d267dcc76885dab20588de}

@@ -2011,7 +2011,7 @@
   "dist-tags": {
     "latest": "1.7.3"
   },
-  "_rev": "469-5db44bf369e36690",
+  "_rev": "482-0c170241e207818a",
   "_id": "b4a",
   "readme": "# Buffer for Array\n\nBuffer for Array (B4A) provides a set of functions for bridging the gap between the Node.js `Buffer` class and the `Uint8Array` class. A browser compatibility layer is also included, making it possible to use B4A in both Node.js and browsers without having to worry about whether you're dealing with buffers or typed arrays.\n\n## Installation\n\n```sh\nnpm i b4a\n```\n\n### React Native\n\nWhen imported from React Native `b4a` will make use of `react-native-b4a` for optimised buffer operations when available. All you need to do is install it:\n\n```sh\nnpm i react-native-b4a\n```\n\n## API\n\n#### `b4a.isBuffer(value)`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferisbufferobj\n\nThis will also return `true` when passed a `Uint8Array`.\n\n#### `b4a.isEncoding(encoding)`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferisencodingencoding\n\n#### `b4a.alloc(size[, fill[, encoding]])`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferallocsize-fill-encoding\n\n#### `b4a.allocUnsafe(size)`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferallocunsafesize\n\n#### `b4a.allocUnsafeSlow(size)`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferallocunsafeslowsize\n\n#### `b4a.byteLength(string)`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferbytelengthstring-encoding\n\n#### `b4a.compare(buf1, buf2)`\n\nSee https://nodejs.org/api/buffer.html#static-method-buffercomparebuf1-buf2\n\n#### `b4a.concat(buffers[, totalLength])`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferconcatlist-totallength\n\n#### `b4a.copy(source, target[, targetStart[, sourceStart[, sourceEnd]]])`\n\nSee https://nodejs.org/api/buffer.html#bufcopytarget-targetstart-sourcestart-sourceend\n\n#### `b4a.equals(buf1, buf2)`\n\nSee https://nodejs.org/api/buffer.html#bufequalsotherbuffer\n\n#### `b4a.fill(buffer, value[, offset[, end]][, encoding])`\n\nSee https://nodejs.org/api/buffer.html#buffillvalue-offset-end-encoding\n\n#### `b4a.from(array)`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferfromarray\n\n#### `b4a.from(arrayBuffer[, byteOffset[, length]])`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferfromarraybuffer-byteoffset-length\n\n#### `b4a.from(buffer)`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferfrombuffer\n\n#### `b4a.from(string[, encoding])`\n\nSee https://nodejs.org/api/buffer.html#static-method-bufferfromstring-encoding\n\n#### `b4a.includes(buffer, value[, byteOffset][, encoding])`\n\nSee https://nodejs.org/api/buffer.html#bufincludesvalue-byteoffset-encoding\n\n#### `b4a.indexOf(buffer, value[, byteOffset][, encoding])`\n\nSee https://nodejs.org/api/buffer.html#bufindexofvalue-byteoffset-encoding\n\n#### `b4a.lastIndexOf(buffer, value[, byteOffset][, encoding])`\n\nSee https://nodejs.org/api/buffer.html#buflastindexofvalue-byteoffset-encoding\n\n#### `b4a.swap16(buffer)`\n\nSee https://nodejs.org/api/buffer.html#bufswap16\n\n#### `b4a.swap32(buffer)`\n\nSee https://nodejs.org/api/buffer.html#bufswap32\n\n#### `b4a.swap64(buffer)`\n\nSee https://nodejs.org/api/buffer.html#bufswap64\n\n#### `b4a.toBuffer(buffer)`\n\nConvert a buffer to its canonical representation. In Node.js, the canonical representation is a `Buffer`. In the browser, the canonical representation is a `Uint8Array`.\n\n#### `b4a.toString(buffer, [encoding[, start[, end]]])`\n\nSee https://nodejs.org/api/buffer.html#buftostringencoding-start-end\n\n#### `b4a.write(buffer, string[, offset[, length]][, encoding])`\n\nSee https://nodejs.org/api/buffer.html#bufwritestring-offset-length-encoding\n\n#### `b4a.writeDoubleLE(buffer, value[, offset])`\n\nSee https://nodejs.org/api/buffer.html#bufwritedoublelevalue-offset\n\n#### `b4a.writeFloatLE(buffer, value[, offset])`\n\nSee https://nodejs.org/api/buffer.html#bufwritefloatlevalue-offset\n\n#### `b4a.writeUInt32LE(buffer, value[, offset])`\n\nhttps://nodejs.org/api/buffer.html#bufwriteuint32levalue-offset\n\n#### `b4a.writeInt32LE(buffer, value[, offset])`\n\nSee https://nodejs.org/api/buffer.html#bufwriteint32levalue-offset\n\n#### `b4a.readDoubleLE(buffer[, offset])`\n\nSee https://nodejs.org/api/buffer.html#bufreaddoubleleoffset\n\n#### `b4a.readFloatLE(buffer[, offset])`\n\nSee https://nodejs.org/api/buffer.html#bufreadfloatleoffset\n\n#### `b4a.readUInt32LE(buffer[, offset])`\n\nSee https://nodejs.org/api/buffer.html#bufreaduint32leoffset\n\n#### `b4a.readInt32LE(buffer[, offset])`\n\nSee https://nodejs.org/api/buffer.html#bufreadint32leoffset\n\n## License\n\nApache 2.0",
   "_attachments": {}