mrs-toolbox-cli 0.1.23 → 0.1.26

package/npm-cache/_cacache/content-v2/sha512/{29/0c/b47e64103ac76af42dce42952b7c4656619bb3778cb925f697dac1c4af0e8decc35b3d74612a98e3fcae68d30132352cb56a31ae7369846f6bcd14fa9b5d → 6a/9f/2ca7965619fba50871ed82d15bb4c0986cb0594975648ad8798b1e79d8a6ebc2665ae7ed407c8ab2b39cbc012270924957da012b7c2cf89129746ce786e9}

@@ -9750,7 +9750,7 @@
     "legacy-v4": "4.2.3",
     "legacy-v7": "7.4.6"
   },
-  "_rev": "1743-1d4b12ea1fc23283",
+  "_rev": "1751-4fe054cff22f214a",
   "_id": "minimatch",
   "readme": "# minimatch\n\nA minimal matching utility.\n\nThis is the matching library used internally by npm.\n\nIt works by converting glob expressions into JavaScript `RegExp`\nobjects.\n\n## Usage\n\n```js\n// hybrid module, load with require() or import\nimport { minimatch } from 'minimatch'\n// or:\nconst { minimatch } = require('minimatch')\n\nminimatch('bar.foo', '*.foo') // true!\nminimatch('bar.foo', '*.bar') // false!\nminimatch('bar.foo', '*.+(bar|foo)', { debug: true }) // true, and noisy!\n```\n\n## Features\n\nSupports these glob features:\n\n- Brace Expansion\n- Extended glob matching\n- \"Globstar\" `**` matching\n- [Posix character\n  classes](https://www.gnu.org/software/bash/manual/html_node/Pattern-Matching.html),\n  like `[[:alpha:]]`, supporting the full range of Unicode\n  characters. For example, `[[:alpha:]]` will match against\n  `'é'`, though `[a-zA-Z]` will not. Collating symbol and set\n  matching is not supported, so `[[=e=]]` will _not_ match `'é'`\n  and `[[.ch.]]` will not match `'ch'` in locales where `ch` is\n  considered a single character.\n\nSee:\n\n- `man sh`\n- `man bash` [Pattern\n  Matching](https://www.gnu.org/software/bash/manual/html_node/Pattern-Matching.html)\n- `man 3 fnmatch`\n- `man 5 gitignore`\n\n## Windows\n\n**Please only use forward-slashes in glob expressions.**\n\nThough windows uses either `/` or `\\` as its path separator, only `/`\ncharacters are used by this glob implementation. You must use\nforward-slashes **only** in glob expressions. Back-slashes in patterns\nwill always be interpreted as escape characters, not path separators.\n\nNote that `\\` or `/` _will_ be interpreted as path separators in paths on\nWindows, and will match against `/` in glob expressions.\n\nSo just always use `/` in patterns.\n\n### UNC Paths\n\nOn Windows, UNC paths like `//?/c:/...` or\n`//ComputerName/Share/...` are handled specially.\n\n- Patterns starting with a double-slash followed by some\n  non-slash characters will preserve their double-slash. As a\n  result, a pattern like `//*` will match `//x`, but not `/x`.\n- Patterns staring with `//?/<drive letter>:` will _not_ treat\n  the `?` as a wildcard character. Instead, it will be treated\n  as a normal string.\n- Patterns starting with `//?/<drive letter>:/...` will match\n  file paths starting with `<drive letter>:/...`, and vice versa,\n  as if the `//?/` was not present. This behavior only is\n  present when the drive letters are a case-insensitive match to\n  one another. The remaining portions of the path/pattern are\n  compared case sensitively, unless `nocase:true` is set.\n\nNote that specifying a UNC path using `\\` characters as path\nseparators is always allowed in the file path argument, but only\nallowed in the pattern argument when `windowsPathsNoEscape: true`\nis set in the options.\n\n## Minimatch Class\n\nCreate a minimatch object by instantiating the `minimatch.Minimatch` class.\n\n```javascript\nvar Minimatch = require('minimatch').Minimatch\nvar mm = new Minimatch(pattern, options)\n```\n\n### Properties\n\n- `pattern` The original pattern the minimatch object represents.\n- `options` The options supplied to the constructor.\n- `set` A 2-dimensional array of regexp or string expressions.\n  Each row in the\n  array corresponds to a brace-expanded pattern. Each item in the row\n  corresponds to a single path-part. For example, the pattern\n  `{a,b/c}/d` would expand to a set of patterns like:\n\n        [ [ a, d ]\n        , [ b, c, d ] ]\n\n  If a portion of the pattern doesn't have any \"magic\" in it\n  (that is, it's something like `\"foo\"` rather than `fo*o?`), then it\n  will be left as a string rather than converted to a regular\n  expression.\n\n- `regexp` Created by the `makeRe` method. A single regular expression\n  expressing the entire pattern. This is useful in cases where you wish\n  to use the pattern somewhat like `fnmatch(3)` with `FNM_PATH` enabled.\n- `negate` True if the pattern is negated.\n- `comment` True if the pattern is a comment.\n- `empty` True if the pattern is `\"\"`.\n\n### Methods\n\n- `makeRe()` Generate the `regexp` member if necessary, and return it.\n  Will return `false` if the pattern is invalid.\n- `match(fname)` Return true if the filename matches the pattern, or\n  false otherwise.\n- `matchOne(fileArray, patternArray, partial)` Take a `/`-split\n  filename, and match it against a single row in the `regExpSet`. This\n  method is mainly for internal use, but is exposed so that it can be\n  used by a glob-walker that needs to avoid excessive filesystem calls.\n- `hasMagic()` Returns true if the parsed pattern contains any\n  magic characters. Returns false if all comparator parts are\n  string literals. If the `magicalBraces` option is set on the\n  constructor, then it will consider brace expansions which are\n  not otherwise magical to be magic. If not set, then a pattern\n  like `a{b,c}d` will return `false`, because neither `abd` nor\n  `acd` contain any special glob characters.\n\n  This does **not** mean that the pattern string can be used as a\n  literal filename, as it may contain magic glob characters that\n  are escaped. For example, the pattern `\\\\*` or `[*]` would not\n  be considered to have magic, as the matching portion parses to\n  the literal string `'*'` and would match a path named `'*'`,\n  not `'\\\\*'` or `'[*]'`. The `minimatch.unescape()` method may\n  be used to remove escape characters.\n\nAll other methods are internal, and will be called as necessary.\n\n### minimatch(path, pattern, options)\n\nMain export. Tests a path against the pattern using the options.\n\n```javascript\nvar isJS = minimatch(file, '*.js', { matchBase: true })\n```\n\n### minimatch.filter(pattern, options)\n\nReturns a function that tests its\nsupplied argument, suitable for use with `Array.filter`. Example:\n\n```javascript\nvar javascripts = fileList.filter(minimatch.filter('*.js', { matchBase: true }))\n```\n\n### minimatch.escape(pattern, options = {})\n\nEscape all magic characters in a glob pattern, so that it will\nonly ever match literal strings\n\nIf the `windowsPathsNoEscape` option is used, then characters are\nescaped by wrapping in `[]`, because a magic character wrapped in\na character class can only be satisfied by that exact character.\n\nSlashes (and backslashes in `windowsPathsNoEscape` mode) cannot\nbe escaped or unescaped.\n\n### minimatch.unescape(pattern, options = {})\n\nUn-escape a glob string that may contain some escaped characters.\n\nIf the `windowsPathsNoEscape` option is used, then square-brace\nescapes are removed, but not backslash escapes. For example, it\nwill turn the string `'[*]'` into `*`, but it will not turn\n`'\\\\*'` into `'*'`, because `\\` is a path separator in\n`windowsPathsNoEscape` mode.\n\nWhen `windowsPathsNoEscape` is not set, then both brace escapes\nand backslash escapes are removed.\n\nSlashes (and backslashes in `windowsPathsNoEscape` mode) cannot\nbe escaped or unescaped.\n\n### minimatch.match(list, pattern, options)\n\nMatch against the list of\nfiles, in the style of fnmatch or glob. If nothing is matched, and\noptions.nonull is set, then return a list containing the pattern itself.\n\n```javascript\nvar javascripts = minimatch.match(fileList, '*.js', { matchBase: true })\n```\n\n### minimatch.makeRe(pattern, options)\n\nMake a regular expression object from the pattern.\n\n## Options\n\nAll options are `false` by default.\n\n### debug\n\nDump a ton of stuff to stderr.\n\n### nobrace\n\nDo not expand `{a,b}` and `{1..3}` brace sets.\n\n### noglobstar\n\nDisable `**` matching against multiple folder names.\n\n### dot\n\nAllow patterns to match filenames starting with a period, even if\nthe pattern does not explicitly have a period in that spot.\n\nNote that by default, `a/**/b` will **not** match `a/.d/b`, unless `dot`\nis set.\n\n### noext\n\nDisable \"extglob\" style patterns like `+(a|b)`.\n\n### nocase\n\nPerform a case-insensitive match.\n\n### nocaseMagicOnly\n\nWhen used with `{nocase: true}`, create regular expressions that\nare case-insensitive, but leave string match portions untouched.\nHas no effect when used without `{nocase: true}`\n\nUseful when some other form of case-insensitive matching is used,\nor if the original string representation is useful in some other\nway.\n\n### nonull\n\nWhen a match is not found by `minimatch.match`, return a list containing\nthe pattern itself if this option is set. When not set, an empty list\nis returned if there are no matches.\n\n### magicalBraces\n\nThis only affects the results of the `Minimatch.hasMagic` method.\n\nIf the pattern contains brace expansions, such as `a{b,c}d`, but\nno other magic characters, then the `Minimatch.hasMagic()` method\nwill return `false` by default. When this option set, it will\nreturn `true` for brace expansion as well as other magic glob\ncharacters.\n\n### matchBase\n\nIf set, then patterns without slashes will be matched\nagainst the basename of the path if it contains slashes. For example,\n`a?b` would match the path `/xyz/123/acb`, but not `/xyz/acb/123`.\n\n### nocomment\n\nSuppress the behavior of treating `#` at the start of a pattern as a\ncomment.\n\n### nonegate\n\nSuppress the behavior of treating a leading `!` character as negation.\n\n### flipNegate\n\nReturns from negate expressions the same as if they were not negated.\n(Ie, true on a hit, false on a miss.)\n\n### partial\n\nCompare a partial path to a pattern. As long as the parts of the path that\nare present are not contradicted by the pattern, it will be treated as a\nmatch. This is useful in applications where you're walking through a\nfolder structure, and don't yet have the full path, but want to ensure that\nyou do not walk down paths that can never be a match.\n\nFor example,\n\n```js\nminimatch('/a/b', '/a/*/c/d', { partial: true }) // true, might be /a/b/c/d\nminimatch('/a/b', '/**/d', { partial: true }) // true, might be /a/b/.../d\nminimatch('/x/y/z', '/a/**/z', { partial: true }) // false, because x !== a\n```\n\n### windowsPathsNoEscape\n\nUse `\\\\` as a path separator _only_, and _never_ as an escape\ncharacter. If set, all `\\\\` characters are replaced with `/` in\nthe pattern. Note that this makes it **impossible** to match\nagainst paths containing literal glob pattern characters, but\nallows matching with patterns constructed using `path.join()` and\n`path.resolve()` on Windows platforms, mimicking the (buggy!)\nbehavior of earlier versions on Windows. Please use with\ncaution, and be mindful of [the caveat about Windows\npaths](#windows).\n\nFor legacy reasons, this is also set if\n`options.allowWindowsEscape` is set to the exact value `false`.\n\n### windowsNoMagicRoot\n\nWhen a pattern starts with a UNC path or drive letter, and in\n`nocase:true` mode, do not convert the root portions of the\npattern into a case-insensitive regular expression, and instead\nleave them as strings.\n\nThis is the default when the platform is `win32` and\n`nocase:true` is set.\n\n### preserveMultipleSlashes\n\nBy default, multiple `/` characters (other than the leading `//`\nin a UNC path, see \"UNC Paths\" above) are treated as a single\n`/`.\n\nThat is, a pattern like `a///b` will match the file path `a/b`.\n\nSet `preserveMultipleSlashes: true` to suppress this behavior.\n\n### optimizationLevel\n\nA number indicating the level of optimization that should be done\nto the pattern prior to parsing and using it for matches.\n\nGlobstar parts `**` are always converted to `*` when `noglobstar`\nis set, and multiple adjacent `**` parts are converted into a\nsingle `**` (ie, `a/**/**/b` will be treated as `a/**/b`, as this\nis equivalent in all cases).\n\n- `0` - Make no further changes. In this mode, `.` and `..` are\n  maintained in the pattern, meaning that they must also appear\n  in the same position in the test path string. Eg, a pattern\n  like `a/*/../c` will match the string `a/b/../c` but not the\n  string `a/c`.\n- `1` - (default) Remove cases where a double-dot `..` follows a\n  pattern portion that is not `**`, `.`, `..`, or empty `''`. For\n  example, the pattern `./a/b/../*` is converted to `./a/*`, and\n  so it will match the path string `./a/c`, but not the path\n  string `./a/b/../c`. Dots and empty path portions in the\n  pattern are preserved.\n- `2` (or higher) - Much more aggressive optimizations, suitable\n  for use with file-walking cases:\n\n  - Remove cases where a double-dot `..` follows a pattern\n    portion that is not `**`, `.`, or empty `''`. Remove empty\n    and `.` portions of the pattern, where safe to do so (ie,\n    anywhere other than the last position, the first position, or\n    the second position in a pattern starting with `/`, as this\n    may indicate a UNC path on Windows).\n  - Convert patterns containing `<pre>/**/../<p>/<rest>` into the\n    equivalent `<pre>/{..,**}/<p>/<rest>`, where `<p>` is a\n    a pattern portion other than `.`, `..`, `**`, or empty\n    `''`.\n  - Dedupe patterns where a `**` portion is present in one and\n    omitted in another, and it is not the final path portion, and\n    they are otherwise equivalent. So `{a/**/b,a/b}` becomes\n    `a/**/b`, because `**` matches against an empty path portion.\n  - Dedupe patterns where a `*` portion is present in one, and a\n    non-dot pattern other than `**`, `.`, `..`, or `''` is in the\n    same position in the other. So `a/{*,x}/b` becomes `a/*/b`,\n    because `*` can match against `x`.\n\n  While these optimizations improve the performance of\n  file-walking use cases such as [glob](http://npm.im/glob) (ie,\n  the reason this module exists), there are cases where it will\n  fail to match a literal string that would have been matched in\n  optimization level 1 or 0.\n\n  Specifically, while the `Minimatch.match()` method will\n  optimize the file path string in the same ways, resulting in\n  the same matches, it will fail when tested with the regular\n  expression provided by `Minimatch.makeRe()`, unless the path\n  string is first processed with\n  `minimatch.levelTwoFileOptimize()` or similar.\n\n### platform\n\nWhen set to `win32`, this will trigger all windows-specific\nbehaviors (special handling for UNC paths, and treating `\\` as\nseparators in file paths for comparison.)\n\nDefaults to the value of `process.platform`.\n\n## Comparisons to other fnmatch/glob implementations\n\nWhile strict compliance with the existing standards is a\nworthwhile goal, some discrepancies exist between minimatch and\nother implementations. Some are intentional, and some are\nunavoidable.\n\nIf the pattern starts with a `!` character, then it is negated. Set the\n`nonegate` flag to suppress this behavior, and treat leading `!`\ncharacters normally. This is perhaps relevant if you wish to start the\npattern with a negative extglob pattern like `!(a|B)`. Multiple `!`\ncharacters at the start of a pattern will negate the pattern multiple\ntimes.\n\nIf a pattern starts with `#`, then it is treated as a comment, and\nwill not match anything. Use `\\#` to match a literal `#` at the\nstart of a line, or set the `nocomment` flag to suppress this behavior.\n\nThe double-star character `**` is supported by default, unless the\n`noglobstar` flag is set. This is supported in the manner of bsdglob\nand bash 4.1, where `**` only has special significance if it is the only\nthing in a path part. That is, `a/**/b` will match `a/x/y/b`, but\n`a/**b` will not.\n\nIf an escaped pattern has no matches, and the `nonull` flag is set,\nthen minimatch.match returns the pattern as-provided, rather than\ninterpreting the character escapes. For example,\n`minimatch.match([], \"\\\\*a\\\\?\")` will return `\"\\\\*a\\\\?\"` rather than\n`\"*a?\"`. This is akin to setting the `nullglob` option in bash, except\nthat it does not resolve escaped pattern characters.\n\nIf brace expansion is not disabled, then it is performed before any\nother interpretation of the glob pattern. Thus, a pattern like\n`+(a|{b),c)}`, which would not be valid in bash or zsh, is expanded\n**first** into the set of `+(a|b)` and `+(a|c)`, and those patterns are\nchecked for validity. Since those two are valid, matching proceeds.\n\nNegated extglob patterns are handled as closely as possible to\nBash semantics, but there are some cases with negative extglobs\nwhich are exceedingly difficult to express in a JavaScript\nregular expression. In particular the negated pattern\n`<start>!(<pattern>*|)*` will in bash match anything that does\nnot start with `<start><pattern>`. However,\n`<start>!(<pattern>*)*` _will_ match paths starting with\n`<start><pattern>`, because the empty string can match against\nthe negated portion. In this library, `<start>!(<pattern>*|)*`\nwill _not_ match any pattern starting with `<start>`, due to a\ndifference in precisely which patterns are considered \"greedy\" in\nRegular Expressions vs bash path expansion. This may be fixable,\nbut not without incurring some complexity and performance costs,\nand the trade-off seems to not be worth pursuing.\n\nNote that `fnmatch(3)` in libc is an extremely naive string comparison\nmatcher, which does not do anything special for slashes. This library is\ndesigned to be used in glob searching and file walkers, and so it does do\nspecial things with `/`. Thus, `foo*` will not match `foo/bar` in this\nlibrary, even though it would in `fnmatch(3)`.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{2f/7b/af0084bbffe6430280bbec246f8f3f1c3302cc697f1624dc0062d1fc11808c449f0f6ec6190ea84ca49f19cb8722bd07aa697aa7ddb11a3df3e6e931ee19 → 6b/40/abea1947e5bec6248199cf827b81a98a5de6093fd83a347c49c6059faf77fefe697b6ecb38d7feaf792b403e43c7d8ab7cd15b4ce095455f29902143e482}

@@ -17370,12 +17370,256 @@
       },
       "_hasShrinkwrap": false,
       "contributors": []
+    },
+    "3.713.0": {
+      "name": "@aws-sdk/credential-provider-web-identity",
+      "version": "3.713.0",
+      "description": "AWS credential provider that calls STS assumeRole for temporary AWS credentials",
+      "main": "./dist-cjs/index.js",
+      "module": "./dist-es/index.js",
+      "scripts": {
+        "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types'",
+        "build:cjs": "node ../../scripts/compilation/inline credential-provider-web-identity",
+        "build:es": "tsc -p tsconfig.es.json",
+        "build:include:deps": "lerna run --scope $npm_package_name --include-dependencies build",
+        "build:types": "tsc -p tsconfig.types.json",
+        "build:types:downlevel": "downlevel-dts dist-types dist-types/ts3.4",
+        "clean": "rimraf ./dist-* && rimraf *.tsbuildinfo",
+        "test": "yarn g:vitest run",
+        "test:watch": "yarn g:vitest watch"
+      },
+      "browser": {
+        "./dist-cjs/fromTokenFile": false,
+        "./dist-es/fromTokenFile": false
+      },
+      "react-native": {
+        "./dist-es/fromTokenFile": false,
+        "./dist-cjs/fromTokenFile": false
+      },
+      "keywords": [
+        "aws",
+        "credentials"
+      ],
+      "author": {
+        "name": "AWS SDK for JavaScript Team",
+        "url": "https://aws.amazon.com/javascript/"
+      },
+      "license": "Apache-2.0",
+      "dependencies": {
+        "@aws-sdk/core": "3.713.0",
+        "@aws-sdk/types": "3.713.0",
+        "@smithy/property-provider": "^3.1.11",
+        "@smithy/types": "^3.7.2",
+        "tslib": "^2.6.2"
+      },
+      "devDependencies": {
+        "@tsconfig/recommended": "1.0.1",
+        "@types/node": "^16.18.96",
+        "concurrently": "7.0.0",
+        "downlevel-dts": "0.10.1",
+        "rimraf": "3.0.2",
+        "typescript": "~4.9.5"
+      },
+      "peerDependencies": {
+        "@aws-sdk/client-sts": "^3.713.0"
+      },
+      "types": "./dist-types/index.d.ts",
+      "engines": {
+        "node": ">=16.0.0"
+      },
+      "typesVersions": {
+        "<4.0": {
+          "dist-types/*": [
+            "dist-types/ts3.4/*"
+          ]
+        }
+      },
+      "homepage": "https://github.com/aws/aws-sdk-js-v3/tree/main/packages/credential-provider-web-identity",
+      "repository": {
+        "type": "git",
+        "url": "git+https://github.com/aws/aws-sdk-js-v3.git",
+        "directory": "packages/credential-provider-web-identity"
+      },
+      "_id": "@aws-sdk/credential-provider-web-identity@3.713.0",
+      "bugs": {
+        "url": "https://github.com/aws/aws-sdk-js-v3/issues"
+      },
+      "_nodeVersion": "18.20.3",
+      "_npmVersion": "10.7.0",
+      "dist": {
+        "integrity": "sha512-hz2Ru+xKYQupxyYb8KCCmH6qhzn4MSkocFbnBxevlQMYbugi80oaQtpmkj2ovrKCY2ktD4ufhC/8UZJMFGjAqw==",
+        "shasum": "9ade55a6687d5d890909ec399cf39b248a9a8380",
+        "tarball": "https://verdaccio.mrsdev.ru/@aws-sdk%2fcredential-provider-web-identity/-/credential-provider-web-identity-3.713.0.tgz",
+        "fileCount": 15,
+        "unpackedSize": 33197,
+        "signatures": [
+          {
+            "keyid": "SHA256:jl3bwswu80PjjokCgh0o2w5c2U4LhQAE57gj9cz1kzA",
+            "sig": "MEQCIHQKczHeRTdny0ZgWN90Jewn9jsKcNlD6h2dvUi0ef/4AiBbjrAtRFD4qf2ENIBWp6IBx6Ks2VvRm6NN9jGv5CFWyQ=="
+          }
+        ]
+      },
+      "_npmUser": {
+        "name": "aws-sdk-bot",
+        "email": "aws-sdk-js-automation@amazon.com"
+      },
+      "directories": {},
+      "maintainers": [
+        {
+          "name": "amzn-oss",
+          "email": "osa-3p@amazon.com"
+        },
+        {
+          "name": "aws-sdk-bot",
+          "email": "aws-sdk-js-automation@amazon.com"
+        },
+        {
+          "name": "trivikr-aws",
+          "email": "trivikr@amazon.com"
+        },
+        {
+          "name": "mattsb42-aws",
+          "email": "bullocm@amazon.com"
+        },
+        {
+          "name": "kuhe",
+          "email": "george.jing.fu+npm@gmail.com"
+        }
+      ],
+      "_npmOperationalInternal": {
+        "host": "s3://npm-registry-packages-npm-production",
+        "tmp": "tmp/credential-provider-web-identity_3.713.0_1734379504932_0.977936546770847"
+      },
+      "_hasShrinkwrap": false,
+      "contributors": []
+    },
+    "3.714.0": {
+      "name": "@aws-sdk/credential-provider-web-identity",
+      "version": "3.714.0",
+      "description": "AWS credential provider that calls STS assumeRole for temporary AWS credentials",
+      "main": "./dist-cjs/index.js",
+      "module": "./dist-es/index.js",
+      "scripts": {
+        "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types'",
+        "build:cjs": "node ../../scripts/compilation/inline credential-provider-web-identity",
+        "build:es": "tsc -p tsconfig.es.json",
+        "build:include:deps": "lerna run --scope $npm_package_name --include-dependencies build",
+        "build:types": "tsc -p tsconfig.types.json",
+        "build:types:downlevel": "downlevel-dts dist-types dist-types/ts3.4",
+        "clean": "rimraf ./dist-* && rimraf *.tsbuildinfo",
+        "test": "yarn g:vitest run",
+        "test:watch": "yarn g:vitest watch"
+      },
+      "browser": {
+        "./dist-cjs/fromTokenFile": false,
+        "./dist-es/fromTokenFile": false
+      },
+      "react-native": {
+        "./dist-es/fromTokenFile": false,
+        "./dist-cjs/fromTokenFile": false
+      },
+      "keywords": [
+        "aws",
+        "credentials"
+      ],
+      "author": {
+        "name": "AWS SDK for JavaScript Team",
+        "url": "https://aws.amazon.com/javascript/"
+      },
+      "license": "Apache-2.0",
+      "dependencies": {
+        "@aws-sdk/core": "3.714.0",
+        "@aws-sdk/types": "3.714.0",
+        "@smithy/property-provider": "^3.1.11",
+        "@smithy/types": "^3.7.2",
+        "tslib": "^2.6.2"
+      },
+      "devDependencies": {
+        "@tsconfig/recommended": "1.0.1",
+        "@types/node": "^16.18.96",
+        "concurrently": "7.0.0",
+        "downlevel-dts": "0.10.1",
+        "rimraf": "3.0.2",
+        "typescript": "~4.9.5"
+      },
+      "peerDependencies": {
+        "@aws-sdk/client-sts": "^3.714.0"
+      },
+      "types": "./dist-types/index.d.ts",
+      "engines": {
+        "node": ">=16.0.0"
+      },
+      "typesVersions": {
+        "<4.0": {
+          "dist-types/*": [
+            "dist-types/ts3.4/*"
+          ]
+        }
+      },
+      "homepage": "https://github.com/aws/aws-sdk-js-v3/tree/main/packages/credential-provider-web-identity",
+      "repository": {
+        "type": "git",
+        "url": "git+https://github.com/aws/aws-sdk-js-v3.git",
+        "directory": "packages/credential-provider-web-identity"
+      },
+      "_id": "@aws-sdk/credential-provider-web-identity@3.714.0",
+      "bugs": {
+        "url": "https://github.com/aws/aws-sdk-js-v3/issues"
+      },
+      "_nodeVersion": "18.20.3",
+      "_npmVersion": "10.7.0",
+      "dist": {
+        "integrity": "sha512-piKfEJvLrGZ0bH4NPO19d1dtfCZi2p6YJUK/9vRCD1rvJidOuHNeUwIcxTnkIMovQHX12rZVvU9ub0C3CwegUQ==",
+        "shasum": "975b11d07c0f87bc4f6470cb45aef5aee590b78c",
+        "tarball": "https://verdaccio.mrsdev.ru/@aws-sdk%2fcredential-provider-web-identity/-/credential-provider-web-identity-3.714.0.tgz",
+        "fileCount": 15,
+        "unpackedSize": 32799,
+        "signatures": [
+          {
+            "keyid": "SHA256:jl3bwswu80PjjokCgh0o2w5c2U4LhQAE57gj9cz1kzA",
+            "sig": "MEYCIQDGHfWb+IOqzQBWY4RppikjB9i6A8mjPw1cBynPzm1gMwIhAKgL5XPekjyBsLgVIN0IWpNRiJwMaMD1PDx3DvJKdDas"
+          }
+        ]
+      },
+      "_npmUser": {
+        "name": "aws-sdk-bot",
+        "email": "aws-sdk-js-automation@amazon.com"
+      },
+      "directories": {},
+      "maintainers": [
+        {
+          "name": "amzn-oss",
+          "email": "osa-3p@amazon.com"
+        },
+        {
+          "name": "aws-sdk-bot",
+          "email": "aws-sdk-js-automation@amazon.com"
+        },
+        {
+          "name": "trivikr-aws",
+          "email": "trivikr@amazon.com"
+        },
+        {
+          "name": "mattsb42-aws",
+          "email": "bullocm@amazon.com"
+        },
+        {
+          "name": "kuhe",
+          "email": "george.jing.fu+npm@gmail.com"
+        }
+      ],
+      "_npmOperationalInternal": {
+        "host": "s3://npm-registry-packages-npm-production",
+        "tmp": "tmp/credential-provider-web-identity_3.714.0_1734465315303_0.09123581844820805"
+      },
+      "_hasShrinkwrap": false,
+      "contributors": []
     }
   },
   "time": {
     "created": "2021-03-27T00:21:53.642Z",
     "3.10.0": "2021-03-27T00:21:53.930Z",
-    "modified": "2024-12-10T20:36:35.446Z",
+    "modified": "2024-12-17T19:55:15.769Z",
     "3.11.0": "2021-04-01T23:21:52.589Z",
     "3.12.0": "2021-04-09T23:23:48.140Z",
     "3.13.1": "2021-04-22T21:43:04.050Z",
@@ -17521,13 +17765,15 @@
     "3.692.0": "2024-11-14T20:05:46.131Z",
     "3.693.0": "2024-11-15T02:48:29.599Z",
     "3.696.0": "2024-11-19T21:24:03.644Z",
-    "3.709.0": "2024-12-10T20:36:35.185Z"
+    "3.709.0": "2024-12-10T20:36:35.185Z",
+    "3.713.0": "2024-12-16T20:05:05.138Z",
+    "3.714.0": "2024-12-17T19:55:15.496Z"
   },
   "users": {},
   "dist-tags": {
-    "latest": "3.709.0"
+    "latest": "3.714.0"
   },
-  "_rev": "66-5773e1b3fa83f8c7",
+  "_rev": "68-33e3f8d489887682",
   "_id": "@aws-sdk/credential-provider-web-identity",
   "readme": "# @aws-sdk/credential-provider-web-identity\n\n[![NPM version](https://img.shields.io/npm/v/@aws-sdk/credential-provider-web-identity/latest.svg)](https://www.npmjs.com/package/@aws-sdk/credential-provider-web-identity)\n[![NPM downloads](https://img.shields.io/npm/dm/@aws-sdk/credential-provider-web-identity.svg)](https://www.npmjs.com/package/@aws-sdk/credential-provider-web-identity)\n\n> An internal package\n\n## Usage\n\nYou probably shouldn't, at least directly. Please use [@aws-sdk/credential-providers](https://www.npmjs.com/package/@aws-sdk/credential-providers)\ninstead.",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{0a/e6/6c67686a0b7be9c947a8d8fd9104cad2effc3e882cdfc243afc50ccd6b5122382a0656cca989c5aac3a2564c58031007f21fd38bba7e24973ce114376b9d → 6b/aa/181305e953964cdeea9031df9341cb30fdcddfe5a36bbdb2d00f26830508a205e52212d04849bdd3926104505e546d54f3eda1f0211aab0cf03ce790e839}

@@ -5657,7 +5657,7 @@
   "dist-tags": {
     "latest": "3.374.0"
   },
-  "_rev": "50-c766f193dc3b6619",
+  "_rev": "52-f0a3af88eb2fb813",
   "_id": "@aws-sdk/eventstream-codec",
   "readme": "# @aws-sdk/eventstream-codec\n\n[![NPM version](https://img.shields.io/npm/v/@aws-sdk/eventstream-codec/latest.svg)](https://www.npmjs.com/package/@aws-sdk/eventstream-codec)\n[![NPM downloads](https://img.shields.io/npm/dm/@aws-sdk/eventstream-codec.svg)](https://www.npmjs.com/package/@aws-sdk/eventstream-codec)",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{d9/49/9f0de53300875c7b8d1702dde63ccd8c41a08b93d922bb14b390b63590f396196a8f9004706d2b1961098f8d5f115340e3610d1e75b9418962871ee820f1 → 6c/10/812b4316bbe91beeb0f3030f5180c528f83a3c8fff05278e98d49d18ef2358e75898a0090b620917614a3b1bce106488d9ec938a1b5aa1e157209d322730}

@@ -2031,7 +2031,7 @@
   "dist-tags": {
     "latest": "3.374.0"
   },
-  "_rev": "56-2f92ba446841fe71",
+  "_rev": "58-58c86225d6f641fb",
   "_id": "@aws-sdk/util-config-provider",
   "readme": "# @aws-sdk/util-config-provider\n\n[![NPM version](https://img.shields.io/npm/v/@aws-sdk/util-config-provider/latest.svg)](https://www.npmjs.com/package/@aws-sdk/util-config-provider)\n[![NPM downloads](https://img.shields.io/npm/dm/@aws-sdk/util-config-provider.svg)](https://www.npmjs.com/package/@aws-sdk/util-config-provider)",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{ba/1a/38dbfbe0e5c911ecaf002b891f6402c776e68f591bd669321d95f2c41fac99059b59297543df5e8fc23d4738717793b43ff073e6dbe32091d0190f54bc6d → 70/55/c09464fb9d6690a93aef13cc78b7cfb38d57aaa780a5a55edd9e56f773e1ac370c1cec9d264889d265c0ffebc69acdac41116ca3f53512dc3c213f9413a6}

@@ -9286,7 +9286,7 @@
     "next": "3.3.5",
     "legacy-v4": "4.2.8"
   },
-  "_rev": "956-33c042d1614a376d",
+  "_rev": "962-5a253666a8f6d60c",
   "_id": "minipass",
   "readme": "# minipass\n\nA _very_ minimal implementation of a [PassThrough\nstream](https://nodejs.org/api/stream.html#stream_class_stream_passthrough)\n\n[It's very\nfast](https://docs.google.com/spreadsheets/d/1K_HR5oh3r80b8WVMWCPPjfuWXUgfkmhlX7FGI6JJ8tY/edit?usp=sharing)\nfor objects, strings, and buffers.\n\nSupports `pipe()`ing (including multi-`pipe()` and backpressure\ntransmission), buffering data until either a `data` event handler\nor `pipe()` is added (so you don't lose the first chunk), and\nmost other cases where PassThrough is a good idea.\n\nThere is a `read()` method, but it's much more efficient to\nconsume data from this stream via `'data'` events or by calling\n`pipe()` into some other stream. Calling `read()` requires the\nbuffer to be flattened in some cases, which requires copying\nmemory.\n\nIf you set `objectMode: true` in the options, then whatever is\nwritten will be emitted. Otherwise, it'll do a minimal amount of\nBuffer copying to ensure proper Streams semantics when `read(n)`\nis called.\n\n`objectMode` can only be set at instantiation. Attempting to\nwrite something other than a String or Buffer without having set\n`objectMode` in the options will throw an error.\n\nThis is not a `through` or `through2` stream. It doesn't\ntransform the data, it just passes it right through. If you want\nto transform the data, extend the class, and override the\n`write()` method. Once you're done transforming the data however\nyou want, call `super.write()` with the transform output.\n\nFor some examples of streams that extend Minipass in various\nways, check out:\n\n- [minizlib](http://npm.im/minizlib)\n- [fs-minipass](http://npm.im/fs-minipass)\n- [tar](http://npm.im/tar)\n- [minipass-collect](http://npm.im/minipass-collect)\n- [minipass-flush](http://npm.im/minipass-flush)\n- [minipass-pipeline](http://npm.im/minipass-pipeline)\n- [tap](http://npm.im/tap)\n- [tap-parser](http://npm.im/tap-parser)\n- [treport](http://npm.im/treport)\n- [minipass-fetch](http://npm.im/minipass-fetch)\n- [pacote](http://npm.im/pacote)\n- [make-fetch-happen](http://npm.im/make-fetch-happen)\n- [cacache](http://npm.im/cacache)\n- [ssri](http://npm.im/ssri)\n- [npm-registry-fetch](http://npm.im/npm-registry-fetch)\n- [minipass-json-stream](http://npm.im/minipass-json-stream)\n- [minipass-sized](http://npm.im/minipass-sized)\n\n## Usage in TypeScript\n\nThe `Minipass` class takes three type template definitions:\n\n- `RType` the type being read, which defaults to `Buffer`. If\n  `RType` is `string`, then the constructor _must_ get an options\n  object specifying either an `encoding` or `objectMode: true`.\n  If it's anything other than `string` or `Buffer`, then it\n  _must_ get an options object specifying `objectMode: true`.\n- `WType` the type being written. If `RType` is `Buffer` or\n  `string`, then this defaults to `ContiguousData` (Buffer,\n  string, ArrayBuffer, or ArrayBufferView). Otherwise, it\n  defaults to `RType`.\n- `Events` type mapping event names to the arguments emitted\n  with that event, which extends `Minipass.Events`.\n\nTo declare types for custom events in subclasses, extend the\nthird parameter with your own event signatures. For example:\n\n```js\nimport { Minipass } from 'minipass'\n\n// a NDJSON stream that emits 'jsonError' when it can't stringify\nexport interface Events extends Minipass.Events {\n  jsonError: [e: Error]\n}\n\nexport class NDJSONStream extends Minipass<string, any, Events> {\n  constructor() {\n    super({ objectMode: true })\n  }\n\n  // data is type `any` because that's WType\n  write(data, encoding, cb) {\n    try {\n      const json = JSON.stringify(data)\n      return super.write(json + '\\n', encoding, cb)\n    } catch (er) {\n      if (!er instanceof Error) {\n        er = Object.assign(new Error('json stringify failed'), {\n          cause: er,\n        })\n      }\n      // trying to emit with something OTHER than an error will\n      // fail, because we declared the event arguments type.\n      this.emit('jsonError', er)\n    }\n  }\n}\n\nconst s = new NDJSONStream()\ns.on('jsonError', e => {\n  // here, TS knows that e is an Error\n})\n```\n\nEmitting/handling events that aren't declared in this way is\nfine, but the arguments will be typed as `unknown`.\n\n## Differences from Node.js Streams\n\nThere are several things that make Minipass streams different\nfrom (and in some ways superior to) Node.js core streams.\n\nPlease read these caveats if you are familiar with node-core\nstreams and intend to use Minipass streams in your programs.\n\nYou can avoid most of these differences entirely (for a very\nsmall performance penalty) by setting `{async: true}` in the\nconstructor options.\n\n### Timing\n\nMinipass streams are designed to support synchronous use-cases.\nThus, data is emitted as soon as it is available, always. It is\nbuffered until read, but no longer. Another way to look at it is\nthat Minipass streams are exactly as synchronous as the logic\nthat writes into them.\n\nThis can be surprising if your code relies on\n`PassThrough.write()` always providing data on the next tick\nrather than the current one, or being able to call `resume()` and\nnot have the entire buffer disappear immediately.\n\nHowever, without this synchronicity guarantee, there would be no\nway for Minipass to achieve the speeds it does, or support the\nsynchronous use cases that it does. Simply put, waiting takes\ntime.\n\nThis non-deferring approach makes Minipass streams much easier to\nreason about, especially in the context of Promises and other\nflow-control mechanisms.\n\nExample:\n\n```js\n// hybrid module, either works\nimport { Minipass } from 'minipass'\n// or:\nconst { Minipass } = require('minipass')\n\nconst stream = new Minipass()\nstream.on('data', () => console.log('data event'))\nconsole.log('before write')\nstream.write('hello')\nconsole.log('after write')\n// output:\n// before write\n// data event\n// after write\n```\n\n### Exception: Async Opt-In\n\nIf you wish to have a Minipass stream with behavior that more\nclosely mimics Node.js core streams, you can set the stream in\nasync mode either by setting `async: true` in the constructor\noptions, or by setting `stream.async = true` later on.\n\n```js\n// hybrid module, either works\nimport { Minipass } from 'minipass'\n// or:\nconst { Minipass } = require('minipass')\n\nconst asyncStream = new Minipass({ async: true })\nasyncStream.on('data', () => console.log('data event'))\nconsole.log('before write')\nasyncStream.write('hello')\nconsole.log('after write')\n// output:\n// before write\n// after write\n// data event <-- this is deferred until the next tick\n```\n\nSwitching _out_ of async mode is unsafe, as it could cause data\ncorruption, and so is not enabled. Example:\n\n```js\nimport { Minipass } from 'minipass'\nconst stream = new Minipass({ encoding: 'utf8' })\nstream.on('data', chunk => console.log(chunk))\nstream.async = true\nconsole.log('before writes')\nstream.write('hello')\nsetStreamSyncAgainSomehow(stream) // <-- this doesn't actually exist!\nstream.write('world')\nconsole.log('after writes')\n// hypothetical output would be:\n// before writes\n// world\n// after writes\n// hello\n// NOT GOOD!\n```\n\nTo avoid this problem, once set into async mode, any attempt to\nmake the stream sync again will be ignored.\n\n```js\nconst { Minipass } = require('minipass')\nconst stream = new Minipass({ encoding: 'utf8' })\nstream.on('data', chunk => console.log(chunk))\nstream.async = true\nconsole.log('before writes')\nstream.write('hello')\nstream.async = false // <-- no-op, stream already async\nstream.write('world')\nconsole.log('after writes')\n// actual output:\n// before writes\n// after writes\n// hello\n// world\n```\n\n### No High/Low Water Marks\n\nNode.js core streams will optimistically fill up a buffer,\nreturning `true` on all writes until the limit is hit, even if\nthe data has nowhere to go. Then, they will not attempt to draw\nmore data in until the buffer size dips below a minimum value.\n\nMinipass streams are much simpler. The `write()` method will\nreturn `true` if the data has somewhere to go (which is to say,\ngiven the timing guarantees, that the data is already there by\nthe time `write()` returns).\n\nIf the data has nowhere to go, then `write()` returns false, and\nthe data sits in a buffer, to be drained out immediately as soon\nas anyone consumes it.\n\nSince nothing is ever buffered unnecessarily, there is much less\ncopying data, and less bookkeeping about buffer capacity levels.\n\n### Hazards of Buffering (or: Why Minipass Is So Fast)\n\nSince data written to a Minipass stream is immediately written\nall the way through the pipeline, and `write()` always returns\ntrue/false based on whether the data was fully flushed,\nbackpressure is communicated immediately to the upstream caller.\nThis minimizes buffering.\n\nConsider this case:\n\n```js\nconst { PassThrough } = require('stream')\nconst p1 = new PassThrough({ highWaterMark: 1024 })\nconst p2 = new PassThrough({ highWaterMark: 1024 })\nconst p3 = new PassThrough({ highWaterMark: 1024 })\nconst p4 = new PassThrough({ highWaterMark: 1024 })\n\np1.pipe(p2).pipe(p3).pipe(p4)\np4.on('data', () => console.log('made it through'))\n\n// this returns false and buffers, then writes to p2 on next tick (1)\n// p2 returns false and buffers, pausing p1, then writes to p3 on next tick (2)\n// p3 returns false and buffers, pausing p2, then writes to p4 on next tick (3)\n// p4 returns false and buffers, pausing p3, then emits 'data' and 'drain'\n// on next tick (4)\n// p3 sees p4's 'drain' event, and calls resume(), emitting 'resume' and\n// 'drain' on next tick (5)\n// p2 sees p3's 'drain', calls resume(), emits 'resume' and 'drain' on next tick (6)\n// p1 sees p2's 'drain', calls resume(), emits 'resume' and 'drain' on next\n// tick (7)\n\np1.write(Buffer.alloc(2048)) // returns false\n```\n\nAlong the way, the data was buffered and deferred at each stage,\nand multiple event deferrals happened, for an unblocked pipeline\nwhere it was perfectly safe to write all the way through!\n\nFurthermore, setting a `highWaterMark` of `1024` might lead\nsomeone reading the code to think an advisory maximum of 1KiB is\nbeing set for the pipeline. However, the actual advisory\nbuffering level is the _sum_ of `highWaterMark` values, since\neach one has its own bucket.\n\nConsider the Minipass case:\n\n```js\nconst m1 = new Minipass()\nconst m2 = new Minipass()\nconst m3 = new Minipass()\nconst m4 = new Minipass()\n\nm1.pipe(m2).pipe(m3).pipe(m4)\nm4.on('data', () => console.log('made it through'))\n\n// m1 is flowing, so it writes the data to m2 immediately\n// m2 is flowing, so it writes the data to m3 immediately\n// m3 is flowing, so it writes the data to m4 immediately\n// m4 is flowing, so it fires the 'data' event immediately, returns true\n// m4's write returned true, so m3 is still flowing, returns true\n// m3's write returned true, so m2 is still flowing, returns true\n// m2's write returned true, so m1 is still flowing, returns true\n// No event deferrals or buffering along the way!\n\nm1.write(Buffer.alloc(2048)) // returns true\n```\n\nIt is extremely unlikely that you _don't_ want to buffer any data\nwritten, or _ever_ buffer data that can be flushed all the way\nthrough. Neither node-core streams nor Minipass ever fail to\nbuffer written data, but node-core streams do a lot of\nunnecessary buffering and pausing.\n\nAs always, the faster implementation is the one that does less\nstuff and waits less time to do it.\n\n### Immediately emit `end` for empty streams (when not paused)\n\nIf a stream is not paused, and `end()` is called before writing\nany data into it, then it will emit `end` immediately.\n\nIf you have logic that occurs on the `end` event which you don't\nwant to potentially happen immediately (for example, closing file\ndescriptors, moving on to the next entry in an archive parse\nstream, etc.) then be sure to call `stream.pause()` on creation,\nand then `stream.resume()` once you are ready to respond to the\n`end` event.\n\nHowever, this is _usually_ not a problem because:\n\n### Emit `end` When Asked\n\nOne hazard of immediately emitting `'end'` is that you may not\nyet have had a chance to add a listener. In order to avoid this\nhazard, Minipass streams safely re-emit the `'end'` event if a\nnew listener is added after `'end'` has been emitted.\n\nIe, if you do `stream.on('end', someFunction)`, and the stream\nhas already emitted `end`, then it will call the handler right\naway. (You can think of this somewhat like attaching a new\n`.then(fn)` to a previously-resolved Promise.)\n\nTo prevent calling handlers multiple times who would not expect\nmultiple ends to occur, all listeners are removed from the\n`'end'` event whenever it is emitted.\n\n### Emit `error` When Asked\n\nThe most recent error object passed to the `'error'` event is\nstored on the stream. If a new `'error'` event handler is added,\nand an error was previously emitted, then the event handler will\nbe called immediately (or on `process.nextTick` in the case of\nasync streams).\n\nThis makes it much more difficult to end up trying to interact\nwith a broken stream, if the error handler is added after an\nerror was previously emitted.\n\n### Impact of \"immediate flow\" on Tee-streams\n\nA \"tee stream\" is a stream piping to multiple destinations:\n\n```js\nconst tee = new Minipass()\nt.pipe(dest1)\nt.pipe(dest2)\nt.write('foo') // goes to both destinations\n```\n\nSince Minipass streams _immediately_ process any pending data\nthrough the pipeline when a new pipe destination is added, this\ncan have surprising effects, especially when a stream comes in\nfrom some other function and may or may not have data in its\nbuffer.\n\n```js\n// WARNING! WILL LOSE DATA!\nconst src = new Minipass()\nsrc.write('foo')\nsrc.pipe(dest1) // 'foo' chunk flows to dest1 immediately, and is gone\nsrc.pipe(dest2) // gets nothing!\n```\n\nOne solution is to create a dedicated tee-stream junction that\npipes to both locations, and then pipe to _that_ instead.\n\n```js\n// Safe example: tee to both places\nconst src = new Minipass()\nsrc.write('foo')\nconst tee = new Minipass()\ntee.pipe(dest1)\ntee.pipe(dest2)\nsrc.pipe(tee) // tee gets 'foo', pipes to both locations\n```\n\nThe same caveat applies to `on('data')` event listeners. The\nfirst one added will _immediately_ receive all of the data,\nleaving nothing for the second:\n\n```js\n// WARNING! WILL LOSE DATA!\nconst src = new Minipass()\nsrc.write('foo')\nsrc.on('data', handler1) // receives 'foo' right away\nsrc.on('data', handler2) // nothing to see here!\n```\n\nUsing a dedicated tee-stream can be used in this case as well:\n\n```js\n// Safe example: tee to both data handlers\nconst src = new Minipass()\nsrc.write('foo')\nconst tee = new Minipass()\ntee.on('data', handler1)\ntee.on('data', handler2)\nsrc.pipe(tee)\n```\n\nAll of the hazards in this section are avoided by setting `{\nasync: true }` in the Minipass constructor, or by setting\n`stream.async = true` afterwards. Note that this does add some\noverhead, so should only be done in cases where you are willing\nto lose a bit of performance in order to avoid having to refactor\nprogram logic.\n\n## USAGE\n\nIt's a stream! Use it like a stream and it'll most likely do what\nyou want.\n\n```js\nimport { Minipass } from 'minipass'\nconst mp = new Minipass(options) // options is optional\nmp.write('foo')\nmp.pipe(someOtherStream)\nmp.end('bar')\n```\n\n### OPTIONS\n\n- `encoding` How would you like the data coming _out_ of the\n  stream to be encoded? Accepts any values that can be passed to\n  `Buffer.toString()`.\n- `objectMode` Emit data exactly as it comes in. This will be\n  flipped on by default if you write() something other than a\n  string or Buffer at any point. Setting `objectMode: true` will\n  prevent setting any encoding value.\n- `async` Defaults to `false`. Set to `true` to defer data\n  emission until next tick. This reduces performance slightly,\n  but makes Minipass streams use timing behavior closer to Node\n  core streams. See [Timing](#timing) for more details.\n- `signal` An `AbortSignal` that will cause the stream to unhook\n  itself from everything and become as inert as possible. Note\n  that providing a `signal` parameter will make `'error'` events\n  no longer throw if they are unhandled, but they will still be\n  emitted to handlers if any are attached.\n\n### API\n\nImplements the user-facing portions of Node.js's `Readable` and\n`Writable` streams.\n\n### Methods\n\n- `write(chunk, [encoding], [callback])` - Put data in. (Note\n  that, in the base Minipass class, the same data will come out.)\n  Returns `false` if the stream will buffer the next write, or\n  true if it's still in \"flowing\" mode.\n- `end([chunk, [encoding]], [callback])` - Signal that you have\n  no more data to write. This will queue an `end` event to be\n  fired when all the data has been consumed.\n- `pause()` - No more data for a while, please. This also\n  prevents `end` from being emitted for empty streams until the\n  stream is resumed.\n- `resume()` - Resume the stream. If there's data in the buffer,\n  it is all discarded. Any buffered events are immediately\n  emitted.\n- `pipe(dest)` - Send all output to the stream provided. When\n  data is emitted, it is immediately written to any and all pipe\n  destinations. (Or written on next tick in `async` mode.)\n- `unpipe(dest)` - Stop piping to the destination stream. This is\n  immediate, meaning that any asynchronously queued data will\n  _not_ make it to the destination when running in `async` mode.\n  - `options.end` - Boolean, end the destination stream when the\n    source stream ends. Default `true`.\n  - `options.proxyErrors` - Boolean, proxy `error` events from\n    the source stream to the destination stream. Note that errors\n    are _not_ proxied after the pipeline terminates, either due\n    to the source emitting `'end'` or manually unpiping with\n    `src.unpipe(dest)`. Default `false`.\n- `on(ev, fn)`, `emit(ev, fn)` - Minipass streams are\n  EventEmitters. Some events are given special treatment,\n  however. (See below under \"events\".)\n- `promise()` - Returns a Promise that resolves when the stream\n  emits `end`, or rejects if the stream emits `error`.\n- `collect()` - Return a Promise that resolves on `end` with an\n  array containing each chunk of data that was emitted, or\n  rejects if the stream emits `error`. Note that this consumes\n  the stream data.\n- `concat()` - Same as `collect()`, but concatenates the data\n  into a single Buffer object. Will reject the returned promise\n  if the stream is in objectMode, or if it goes into objectMode\n  by the end of the data.\n- `read(n)` - Consume `n` bytes of data out of the buffer. If `n`\n  is not provided, then consume all of it. If `n` bytes are not\n  available, then it returns null. **Note** consuming streams in\n  this way is less efficient, and can lead to unnecessary Buffer\n  copying.\n- `destroy([er])` - Destroy the stream. If an error is provided,\n  then an `'error'` event is emitted. If the stream has a\n  `close()` method, and has not emitted a `'close'` event yet,\n  then `stream.close()` will be called. Any Promises returned by\n  `.promise()`, `.collect()` or `.concat()` will be rejected.\n  After being destroyed, writing to the stream will emit an\n  error. No more data will be emitted if the stream is destroyed,\n  even if it was previously buffered.\n\n### Properties\n\n- `bufferLength` Read-only. Total number of bytes buffered, or in\n  the case of objectMode, the total number of objects.\n- `encoding` Read-only. The encoding that has been set.\n- `flowing` Read-only. Boolean indicating whether a chunk written\n  to the stream will be immediately emitted.\n- `emittedEnd` Read-only. Boolean indicating whether the end-ish\n  events (ie, `end`, `prefinish`, `finish`) have been emitted.\n  Note that listening on any end-ish event will immediateyl\n  re-emit it if it has already been emitted.\n- `writable` Whether the stream is writable. Default `true`. Set\n  to `false` when `end()`\n- `readable` Whether the stream is readable. Default `true`.\n- `pipes` An array of Pipe objects referencing streams that this\n  stream is piping into.\n- `destroyed` A getter that indicates whether the stream was\n  destroyed.\n- `paused` True if the stream has been explicitly paused,\n  otherwise false.\n- `objectMode` Indicates whether the stream is in `objectMode`.\n- `aborted` Readonly property set when the `AbortSignal`\n  dispatches an `abort` event.\n\n### Events\n\n- `data` Emitted when there's data to read. Argument is the data\n  to read. This is never emitted while not flowing. If a listener\n  is attached, that will resume the stream.\n- `end` Emitted when there's no more data to read. This will be\n  emitted immediately for empty streams when `end()` is called.\n  If a listener is attached, and `end` was already emitted, then\n  it will be emitted again. All listeners are removed when `end`\n  is emitted.\n- `prefinish` An end-ish event that follows the same logic as\n  `end` and is emitted in the same conditions where `end` is\n  emitted. Emitted after `'end'`.\n- `finish` An end-ish event that follows the same logic as `end`\n  and is emitted in the same conditions where `end` is emitted.\n  Emitted after `'prefinish'`.\n- `close` An indication that an underlying resource has been\n  released. Minipass does not emit this event, but will defer it\n  until after `end` has been emitted, since it throws off some\n  stream libraries otherwise.\n- `drain` Emitted when the internal buffer empties, and it is\n  again suitable to `write()` into the stream.\n- `readable` Emitted when data is buffered and ready to be read\n  by a consumer.\n- `resume` Emitted when stream changes state from buffering to\n  flowing mode. (Ie, when `resume` is called, `pipe` is called,\n  or a `data` event listener is added.)\n\n### Static Methods\n\n- `Minipass.isStream(stream)` Returns `true` if the argument is a\n  stream, and false otherwise. To be considered a stream, the\n  object must be either an instance of Minipass, or an\n  EventEmitter that has either a `pipe()` method, or both\n  `write()` and `end()` methods. (Pretty much any stream in\n  node-land will return `true` for this.)\n\n## EXAMPLES\n\nHere are some examples of things you can do with Minipass\nstreams.\n\n### simple \"are you done yet\" promise\n\n```js\nmp.promise().then(\n  () => {\n    // stream is finished\n  },\n  er => {\n    // stream emitted an error\n  }\n)\n```\n\n### collecting\n\n```js\nmp.collect().then(all => {\n  // all is an array of all the data emitted\n  // encoding is supported in this case, so\n  // so the result will be a collection of strings if\n  // an encoding is specified, or buffers/objects if not.\n  //\n  // In an async function, you may do\n  // const data = await stream.collect()\n})\n```\n\n### collecting into a single blob\n\nThis is a bit slower because it concatenates the data into one\nchunk for you, but if you're going to do it yourself anyway, it's\nconvenient this way:\n\n```js\nmp.concat().then(onebigchunk => {\n  // onebigchunk is a string if the stream\n  // had an encoding set, or a buffer otherwise.\n})\n```\n\n### iteration\n\nYou can iterate over streams synchronously or asynchronously in\nplatforms that support it.\n\nSynchronous iteration will end when the currently available data\nis consumed, even if the `end` event has not been reached. In\nstring and buffer mode, the data is concatenated, so unless\nmultiple writes are occurring in the same tick as the `read()`,\nsync iteration loops will generally only have a single iteration.\n\nTo consume chunks in this way exactly as they have been written,\nwith no flattening, create the stream with the `{ objectMode:\ntrue }` option.\n\n```js\nconst mp = new Minipass({ objectMode: true })\nmp.write('a')\nmp.write('b')\nfor (let letter of mp) {\n  console.log(letter) // a, b\n}\nmp.write('c')\nmp.write('d')\nfor (let letter of mp) {\n  console.log(letter) // c, d\n}\nmp.write('e')\nmp.end()\nfor (let letter of mp) {\n  console.log(letter) // e\n}\nfor (let letter of mp) {\n  console.log(letter) // nothing\n}\n```\n\nAsynchronous iteration will continue until the end event is reached,\nconsuming all of the data.\n\n```js\nconst mp = new Minipass({ encoding: 'utf8' })\n\n// some source of some data\nlet i = 5\nconst inter = setInterval(() => {\n  if (i-- > 0) mp.write(Buffer.from('foo\\n', 'utf8'))\n  else {\n    mp.end()\n    clearInterval(inter)\n  }\n}, 100)\n\n// consume the data with asynchronous iteration\nasync function consume() {\n  for await (let chunk of mp) {\n    console.log(chunk)\n  }\n  return 'ok'\n}\n\nconsume().then(res => console.log(res))\n// logs `foo\\n` 5 times, and then `ok`\n```\n\n### subclass that `console.log()`s everything written into it\n\n```js\nclass Logger extends Minipass {\n  write(chunk, encoding, callback) {\n    console.log('WRITE', chunk, encoding)\n    return super.write(chunk, encoding, callback)\n  }\n  end(chunk, encoding, callback) {\n    console.log('END', chunk, encoding)\n    return super.end(chunk, encoding, callback)\n  }\n}\n\nsomeSource.pipe(new Logger()).pipe(someDest)\n```\n\n### same thing, but using an inline anonymous class\n\n```js\n// js classes are fun\nsomeSource\n  .pipe(\n    new (class extends Minipass {\n      emit(ev, ...data) {\n        // let's also log events, because debugging some weird thing\n        console.log('EMIT', ev)\n        return super.emit(ev, ...data)\n      }\n      write(chunk, encoding, callback) {\n        console.log('WRITE', chunk, encoding)\n        return super.write(chunk, encoding, callback)\n      }\n      end(chunk, encoding, callback) {\n        console.log('END', chunk, encoding)\n        return super.end(chunk, encoding, callback)\n      }\n    })()\n  )\n  .pipe(someDest)\n```\n\n### subclass that defers 'end' for some reason\n\n```js\nclass SlowEnd extends Minipass {\n  emit(ev, ...args) {\n    if (ev === 'end') {\n      console.log('going to end, hold on a sec')\n      setTimeout(() => {\n        console.log('ok, ready to end now')\n        super.emit('end', ...args)\n      }, 100)\n      return true\n    } else {\n      return super.emit(ev, ...args)\n    }\n  }\n}\n```\n\n### transform that creates newline-delimited JSON\n\n```js\nclass NDJSONEncode extends Minipass {\n  write(obj, cb) {\n    try {\n      // JSON.stringify can throw, emit an error on that\n      return super.write(JSON.stringify(obj) + '\\n', 'utf8', cb)\n    } catch (er) {\n      this.emit('error', er)\n    }\n  }\n  end(obj, cb) {\n    if (typeof obj === 'function') {\n      cb = obj\n      obj = undefined\n    }\n    if (obj !== undefined) {\n      this.write(obj)\n    }\n    return super.end(cb)\n  }\n}\n```\n\n### transform that parses newline-delimited JSON\n\n```js\nclass NDJSONDecode extends Minipass {\n  constructor(options) {\n    // always be in object mode, as far as Minipass is concerned\n    super({ objectMode: true })\n    this._jsonBuffer = ''\n  }\n  write(chunk, encoding, cb) {\n    if (\n      typeof chunk === 'string' &&\n      typeof encoding === 'string' &&\n      encoding !== 'utf8'\n    ) {\n      chunk = Buffer.from(chunk, encoding).toString()\n    } else if (Buffer.isBuffer(chunk)) {\n      chunk = chunk.toString()\n    }\n    if (typeof encoding === 'function') {\n      cb = encoding\n    }\n    const jsonData = (this._jsonBuffer + chunk).split('\\n')\n    this._jsonBuffer = jsonData.pop()\n    for (let i = 0; i < jsonData.length; i++) {\n      try {\n        // JSON.parse can throw, emit an error on that\n        super.write(JSON.parse(jsonData[i]))\n      } catch (er) {\n        this.emit('error', er)\n        continue\n      }\n    }\n    if (cb) cb()\n  }\n}\n```",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{c9/4a/7a3d12a986981ae14bcaea08196030b7f4ed4dc7639f8a16da53b0dccdd2c3b44b7184ee44a0a15b9a4b80740a03e8ed04e659c9c6c9d93c7adccaf482d0 → 72/8e/ed71ce7026ff1ae2ad23829d62729e7a9de4baec6004a566868a3106f4dd3fb5808921fe600f472e70987b972d528b6faedb7728a730c5696be098571be5}

@@ -4968,7 +4968,7 @@
     "latest": "3.693.0",
     "rc": "1.0.0-rc.8"
   },
-  "_rev": "51-95500d26a70319ee",
+  "_rev": "53-92da18a32582ae3e",
   "_id": "@aws-sdk/util-arn-parser",
   "readme": "# @aws-sdk/util-arn-parser\n\n[![NPM version](https://img.shields.io/npm/v/@aws-sdk/util-arn-parser/latest.svg)](https://www.npmjs.com/package/@aws-sdk/util-arn-parser)\n[![NPM downloads](https://img.shields.io/npm/dm/@aws-sdk/util-arn-parser.svg)](https://www.npmjs.com/package/@aws-sdk/util-arn-parser)",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{e4/c9/497f4c2d44f9a9d525ebd3002293508310a17f0a1c1e2d008f39e0a6865c7d4798645b1480169e4b50b0d5d9b5d34bba8429f252db36cf91800bf4a3a6d3 → 74/3b/f47398274dba3141c1c73d605b52bd906500d047711fed7a06075b785f5e36be87098f1452a4468d9f8b85f1631e1449becf0af0306e731bdb2d408b700d}

@@ -4551,7 +4551,7 @@
     "latest": "7.0.6",
     "6x": "6.0.6"
   },
-  "_rev": "1677-fd8f2abd2fe39b6f",
+  "_rev": "1686-f0f4e24b459e209e",
   "_id": "cross-spawn",
   "readme": "",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{67/2e/4461f021b9e975092a52cee763758dd06cc6b6465bfb13736d2b2de4744d0d34d6766eea6220ac041c4450b4ad07fa33375d3ddf338284d4f4ce8e6f53fd → 74/93/d4be5d4806bcde292f5abcc793fe6bb70f97221825c1aa51c4669244bf3505191dba570a63c1587b9990546217eba7053cd97dbace4a1e2dfd90d03c165b}

@@ -1924,7 +1924,7 @@
   "dist-tags": {
     "latest": "5.2.0"
   },
-  "_rev": "59-c3898a18be77fda6",
+  "_rev": "61-afb01ee33cb7358e",
   "_id": "@aws-crypto/sha256-browser",
   "readme": "# @aws-crypto/sha256-browser\n\nSHA256 wrapper for browsers that prefers `window.crypto.subtle` but will\nfall back to a pure JS implementation in @aws-crypto/sha256-js\nto provide a consistent interface for SHA256.\n\n## Usage\n\n- To hash \"some data\"\n```\nimport {Sha256} from '@aws-crypto/sha256-browser'\n\nconst hash = new Sha256();\nhash.update('some data');\nconst result = await hash.digest();\n\n```\n\n- To hmac \"some data\" with \"a key\"\n```\nimport {Sha256} from '@aws-crypto/sha256-browser'\n\nconst hash = new Sha256('a key');\nhash.update('some data');\nconst result = await hash.digest();\n\n```\n\n## Test\n\n`npm test`",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{92/6e/3e33f0a98a3a0a82900bd214028d9e630b09abbe61fdcb1c65f4919d43d50e5eca72746b1c178641d6e1f7ded2ba967bedc7d97017725fccfa60c27b6e33 → 74/d6/d8353479f113c7b861525aecbd8c46c545442437f551d3f87c85d6dc0a15513b55949c699532e7e8d203c96e19a9e7195337d810bb70e5a3b70ccb9bbe28}

@@ -372,7 +372,7 @@
   "dist-tags": {
     "latest": "2.0.4"
   },
-  "_rev": "2256-820c7672642cea61",
+  "_rev": "2266-87140dec9c3d7cab",
   "_id": "inherits",
   "readme": "Browser-friendly inheritance fully compatible with standard node.js\n[inherits](http://nodejs.org/api/util.html#util_util_inherits_constructor_superconstructor).\n\nThis package exports standard `inherits` from node.js `util` module in\nnode environment, but also provides alternative browser-friendly\nimplementation through [browser\nfield](https://gist.github.com/shtylman/4339901). Alternative\nimplementation is a literal copy of standard one located in standalone\nmodule to avoid requiring of `util`. It also has a shim for old\nbrowsers with no `Object.create` support.\n\nWhile keeping you sure you are using standard `inherits`\nimplementation in node.js environment, it allows bundlers such as\n[browserify](https://github.com/substack/node-browserify) to not\ninclude full `util` package to your client code if all you need is\njust `inherits` function. It worth, because browser shim for `util`\npackage is large and `inherits` is often the single function you need\nfrom it.\n\nIt's recommended to use this package instead of\n`require('util').inherits` for any code that has chances to be used\nnot only in node.js but in browser too.\n\n## usage\n\n```js\nvar inherits = require('inherits');\n// then use exactly as the standard one\n```\n\n## note on version ~1.0\n\nVersion ~1.0 had completely different motivation and is not compatible\nneither with 2.0 nor with standard node.js `inherits`.\n\nIf you are using version ~1.0 and planning to switch to ~2.0, be\ncareful:\n\n* new version uses `super_` instead of `super` for referencing\n  superclass\n* new version overwrites current prototype while old one preserves any\n  existing fields on it",
   "_attachments": {}

package/npm-cache/_cacache/content-v2/sha512/{03/e6/c22ee68eb702ada4c03e55da8053c1c254ea54415cf90340fcdf78e643b32408782078cfaca9260a92a50c5ebec44f2960febf190a280184ee71e86a88cc → 75/2d/0d5b9c8de0cf3fda5f2c891f29f08eba6e293086484183ff5475482273b2e7b230e841cf798dda950534e6bb40fb95d2b33432049c13e55af8e16fca408e}

@@ -758,7 +758,7 @@
   "dist-tags": {
     "latest": "5.2.1"
   },
-  "_rev": "1521-62766c6e1645da54",
+  "_rev": "1530-c32fcad4b48d228f",
   "_id": "safe-buffer",
   "readme": "# safe-buffer [![travis][travis-image]][travis-url] [![npm][npm-image]][npm-url] [![downloads][downloads-image]][downloads-url] [![javascript style guide][standard-image]][standard-url]\n\n[travis-image]: https://img.shields.io/travis/feross/safe-buffer/master.svg\n[travis-url]: https://travis-ci.org/feross/safe-buffer\n[npm-image]: https://img.shields.io/npm/v/safe-buffer.svg\n[npm-url]: https://npmjs.org/package/safe-buffer\n[downloads-image]: https://img.shields.io/npm/dm/safe-buffer.svg\n[downloads-url]: https://npmjs.org/package/safe-buffer\n[standard-image]: https://img.shields.io/badge/code_style-standard-brightgreen.svg\n[standard-url]: https://standardjs.com\n\n#### Safer Node.js Buffer API\n\n**Use the new Node.js Buffer APIs (`Buffer.from`, `Buffer.alloc`,\n`Buffer.allocUnsafe`, `Buffer.allocUnsafeSlow`) in all versions of Node.js.**\n\n**Uses the built-in implementation when available.**\n\n## install\n\n```\nnpm install safe-buffer\n```\n\n## usage\n\nThe goal of this package is to provide a safe replacement for the node.js `Buffer`.\n\nIt's a drop-in replacement for `Buffer`. You can use it by adding one `require` line to\nthe top of your node.js modules:\n\n```js\nvar Buffer = require('safe-buffer').Buffer\n\n// Existing buffer code will continue to work without issues:\n\nnew Buffer('hey', 'utf8')\nnew Buffer([1, 2, 3], 'utf8')\nnew Buffer(obj)\nnew Buffer(16) // create an uninitialized buffer (potentially unsafe)\n\n// But you can use these new explicit APIs to make clear what you want:\n\nBuffer.from('hey', 'utf8') // convert from many types to a Buffer\nBuffer.alloc(16) // create a zero-filled buffer (safe)\nBuffer.allocUnsafe(16) // create an uninitialized buffer (potentially unsafe)\n```\n\n## api\n\n### Class Method: Buffer.from(array)\n<!-- YAML\nadded: v3.0.0\n-->\n\n* `array` {Array}\n\nAllocates a new `Buffer` using an `array` of octets.\n\n```js\nconst buf = Buffer.from([0x62,0x75,0x66,0x66,0x65,0x72]);\n  // creates a new Buffer containing ASCII bytes\n  // ['b','u','f','f','e','r']\n```\n\nA `TypeError` will be thrown if `array` is not an `Array`.\n\n### Class Method: Buffer.from(arrayBuffer[, byteOffset[, length]])\n<!-- YAML\nadded: v5.10.0\n-->\n\n* `arrayBuffer` {ArrayBuffer} The `.buffer` property of a `TypedArray` or\n  a `new ArrayBuffer()`\n* `byteOffset` {Number} Default: `0`\n* `length` {Number} Default: `arrayBuffer.length - byteOffset`\n\nWhen passed a reference to the `.buffer` property of a `TypedArray` instance,\nthe newly created `Buffer` will share the same allocated memory as the\nTypedArray.\n\n```js\nconst arr = new Uint16Array(2);\narr[0] = 5000;\narr[1] = 4000;\n\nconst buf = Buffer.from(arr.buffer); // shares the memory with arr;\n\nconsole.log(buf);\n  // Prints: <Buffer 88 13 a0 0f>\n\n// changing the TypedArray changes the Buffer also\narr[1] = 6000;\n\nconsole.log(buf);\n  // Prints: <Buffer 88 13 70 17>\n```\n\nThe optional `byteOffset` and `length` arguments specify a memory range within\nthe `arrayBuffer` that will be shared by the `Buffer`.\n\n```js\nconst ab = new ArrayBuffer(10);\nconst buf = Buffer.from(ab, 0, 2);\nconsole.log(buf.length);\n  // Prints: 2\n```\n\nA `TypeError` will be thrown if `arrayBuffer` is not an `ArrayBuffer`.\n\n### Class Method: Buffer.from(buffer)\n<!-- YAML\nadded: v3.0.0\n-->\n\n* `buffer` {Buffer}\n\nCopies the passed `buffer` data onto a new `Buffer` instance.\n\n```js\nconst buf1 = Buffer.from('buffer');\nconst buf2 = Buffer.from(buf1);\n\nbuf1[0] = 0x61;\nconsole.log(buf1.toString());\n  // 'auffer'\nconsole.log(buf2.toString());\n  // 'buffer' (copy is not changed)\n```\n\nA `TypeError` will be thrown if `buffer` is not a `Buffer`.\n\n### Class Method: Buffer.from(str[, encoding])\n<!-- YAML\nadded: v5.10.0\n-->\n\n* `str` {String} String to encode.\n* `encoding` {String} Encoding to use, Default: `'utf8'`\n\nCreates a new `Buffer` containing the given JavaScript string `str`. If\nprovided, the `encoding` parameter identifies the character encoding.\nIf not provided, `encoding` defaults to `'utf8'`.\n\n```js\nconst buf1 = Buffer.from('this is a tést');\nconsole.log(buf1.toString());\n  // prints: this is a tést\nconsole.log(buf1.toString('ascii'));\n  // prints: this is a tC)st\n\nconst buf2 = Buffer.from('7468697320697320612074c3a97374', 'hex');\nconsole.log(buf2.toString());\n  // prints: this is a tést\n```\n\nA `TypeError` will be thrown if `str` is not a string.\n\n### Class Method: Buffer.alloc(size[, fill[, encoding]])\n<!-- YAML\nadded: v5.10.0\n-->\n\n* `size` {Number}\n* `fill` {Value} Default: `undefined`\n* `encoding` {String} Default: `utf8`\n\nAllocates a new `Buffer` of `size` bytes. If `fill` is `undefined`, the\n`Buffer` will be *zero-filled*.\n\n```js\nconst buf = Buffer.alloc(5);\nconsole.log(buf);\n  // <Buffer 00 00 00 00 00>\n```\n\nThe `size` must be less than or equal to the value of\n`require('buffer').kMaxLength` (on 64-bit architectures, `kMaxLength` is\n`(2^31)-1`). Otherwise, a [`RangeError`][] is thrown. A zero-length Buffer will\nbe created if a `size` less than or equal to 0 is specified.\n\nIf `fill` is specified, the allocated `Buffer` will be initialized by calling\n`buf.fill(fill)`. See [`buf.fill()`][] for more information.\n\n```js\nconst buf = Buffer.alloc(5, 'a');\nconsole.log(buf);\n  // <Buffer 61 61 61 61 61>\n```\n\nIf both `fill` and `encoding` are specified, the allocated `Buffer` will be\ninitialized by calling `buf.fill(fill, encoding)`. For example:\n\n```js\nconst buf = Buffer.alloc(11, 'aGVsbG8gd29ybGQ=', 'base64');\nconsole.log(buf);\n  // <Buffer 68 65 6c 6c 6f 20 77 6f 72 6c 64>\n```\n\nCalling `Buffer.alloc(size)` can be significantly slower than the alternative\n`Buffer.allocUnsafe(size)` but ensures that the newly created `Buffer` instance\ncontents will *never contain sensitive data*.\n\nA `TypeError` will be thrown if `size` is not a number.\n\n### Class Method: Buffer.allocUnsafe(size)\n<!-- YAML\nadded: v5.10.0\n-->\n\n* `size` {Number}\n\nAllocates a new *non-zero-filled* `Buffer` of `size` bytes.  The `size` must\nbe less than or equal to the value of `require('buffer').kMaxLength` (on 64-bit\narchitectures, `kMaxLength` is `(2^31)-1`). Otherwise, a [`RangeError`][] is\nthrown. A zero-length Buffer will be created if a `size` less than or equal to\n0 is specified.\n\nThe underlying memory for `Buffer` instances created in this way is *not\ninitialized*. The contents of the newly created `Buffer` are unknown and\n*may contain sensitive data*. Use [`buf.fill(0)`][] to initialize such\n`Buffer` instances to zeroes.\n\n```js\nconst buf = Buffer.allocUnsafe(5);\nconsole.log(buf);\n  // <Buffer 78 e0 82 02 01>\n  // (octets will be different, every time)\nbuf.fill(0);\nconsole.log(buf);\n  // <Buffer 00 00 00 00 00>\n```\n\nA `TypeError` will be thrown if `size` is not a number.\n\nNote that the `Buffer` module pre-allocates an internal `Buffer` instance of\nsize `Buffer.poolSize` that is used as a pool for the fast allocation of new\n`Buffer` instances created using `Buffer.allocUnsafe(size)` (and the deprecated\n`new Buffer(size)` constructor) only when `size` is less than or equal to\n`Buffer.poolSize >> 1` (floor of `Buffer.poolSize` divided by two). The default\nvalue of `Buffer.poolSize` is `8192` but can be modified.\n\nUse of this pre-allocated internal memory pool is a key difference between\ncalling `Buffer.alloc(size, fill)` vs. `Buffer.allocUnsafe(size).fill(fill)`.\nSpecifically, `Buffer.alloc(size, fill)` will *never* use the internal Buffer\npool, while `Buffer.allocUnsafe(size).fill(fill)` *will* use the internal\nBuffer pool if `size` is less than or equal to half `Buffer.poolSize`. The\ndifference is subtle but can be important when an application requires the\nadditional performance that `Buffer.allocUnsafe(size)` provides.\n\n### Class Method: Buffer.allocUnsafeSlow(size)\n<!-- YAML\nadded: v5.10.0\n-->\n\n* `size` {Number}\n\nAllocates a new *non-zero-filled* and non-pooled `Buffer` of `size` bytes.  The\n`size` must be less than or equal to the value of\n`require('buffer').kMaxLength` (on 64-bit architectures, `kMaxLength` is\n`(2^31)-1`). Otherwise, a [`RangeError`][] is thrown. A zero-length Buffer will\nbe created if a `size` less than or equal to 0 is specified.\n\nThe underlying memory for `Buffer` instances created in this way is *not\ninitialized*. The contents of the newly created `Buffer` are unknown and\n*may contain sensitive data*. Use [`buf.fill(0)`][] to initialize such\n`Buffer` instances to zeroes.\n\nWhen using `Buffer.allocUnsafe()` to allocate new `Buffer` instances,\nallocations under 4KB are, by default, sliced from a single pre-allocated\n`Buffer`. This allows applications to avoid the garbage collection overhead of\ncreating many individually allocated Buffers. This approach improves both\nperformance and memory usage by eliminating the need to track and cleanup as\nmany `Persistent` objects.\n\nHowever, in the case where a developer may need to retain a small chunk of\nmemory from a pool for an indeterminate amount of time, it may be appropriate\nto create an un-pooled Buffer instance using `Buffer.allocUnsafeSlow()` then\ncopy out the relevant bits.\n\n```js\n// need to keep around a few small chunks of memory\nconst store = [];\n\nsocket.on('readable', () => {\n  const data = socket.read();\n  // allocate for retained data\n  const sb = Buffer.allocUnsafeSlow(10);\n  // copy the data into the new allocation\n  data.copy(sb, 0, 0, 10);\n  store.push(sb);\n});\n```\n\nUse of `Buffer.allocUnsafeSlow()` should be used only as a last resort *after*\na developer has observed undue memory retention in their applications.\n\nA `TypeError` will be thrown if `size` is not a number.\n\n### All the Rest\n\nThe rest of the `Buffer` API is exactly the same as in node.js.\n[See the docs](https://nodejs.org/api/buffer.html).\n\n\n## Related links\n\n- [Node.js issue: Buffer(number) is unsafe](https://github.com/nodejs/node/issues/4660)\n- [Node.js Enhancement Proposal: Buffer.from/Buffer.alloc/Buffer.zalloc/Buffer() soft-deprecate](https://github.com/nodejs/node-eps/pull/4)\n\n## Why is `Buffer` unsafe?\n\nToday, the node.js `Buffer` constructor is overloaded to handle many different argument\ntypes like `String`, `Array`, `Object`, `TypedArrayView` (`Uint8Array`, etc.),\n`ArrayBuffer`, and also `Number`.\n\nThe API is optimized for convenience: you can throw any type at it, and it will try to do\nwhat you want.\n\nBecause the Buffer constructor is so powerful, you often see code like this:\n\n```js\n// Convert UTF-8 strings to hex\nfunction toHex (str) {\n  return new Buffer(str).toString('hex')\n}\n```\n\n***But what happens if `toHex` is called with a `Number` argument?***\n\n### Remote Memory Disclosure\n\nIf an attacker can make your program call the `Buffer` constructor with a `Number`\nargument, then they can make it allocate uninitialized memory from the node.js process.\nThis could potentially disclose TLS private keys, user data, or database passwords.\n\nWhen the `Buffer` constructor is passed a `Number` argument, it returns an\n**UNINITIALIZED** block of memory of the specified `size`. When you create a `Buffer` like\nthis, you **MUST** overwrite the contents before returning it to the user.\n\nFrom the [node.js docs](https://nodejs.org/api/buffer.html#buffer_new_buffer_size):\n\n> `new Buffer(size)`\n>\n> - `size` Number\n>\n> The underlying memory for `Buffer` instances created in this way is not initialized.\n> **The contents of a newly created `Buffer` are unknown and could contain sensitive\n> data.** Use `buf.fill(0)` to initialize a Buffer to zeroes.\n\n(Emphasis our own.)\n\nWhenever the programmer intended to create an uninitialized `Buffer` you often see code\nlike this:\n\n```js\nvar buf = new Buffer(16)\n\n// Immediately overwrite the uninitialized buffer with data from another buffer\nfor (var i = 0; i < buf.length; i++) {\n  buf[i] = otherBuf[i]\n}\n```\n\n\n### Would this ever be a problem in real code?\n\nYes. It's surprisingly common to forget to check the type of your variables in a\ndynamically-typed language like JavaScript.\n\nUsually the consequences of assuming the wrong type is that your program crashes with an\nuncaught exception. But the failure mode for forgetting to check the type of arguments to\nthe `Buffer` constructor is more catastrophic.\n\nHere's an example of a vulnerable service that takes a JSON payload and converts it to\nhex:\n\n```js\n// Take a JSON payload {str: \"some string\"} and convert it to hex\nvar server = http.createServer(function (req, res) {\n  var data = ''\n  req.setEncoding('utf8')\n  req.on('data', function (chunk) {\n    data += chunk\n  })\n  req.on('end', function () {\n    var body = JSON.parse(data)\n    res.end(new Buffer(body.str).toString('hex'))\n  })\n})\n\nserver.listen(8080)\n```\n\nIn this example, an http client just has to send:\n\n```json\n{\n  \"str\": 1000\n}\n```\n\nand it will get back 1,000 bytes of uninitialized memory from the server.\n\nThis is a very serious bug. It's similar in severity to the\n[the Heartbleed bug](http://heartbleed.com/) that allowed disclosure of OpenSSL process\nmemory by remote attackers.\n\n\n### Which real-world packages were vulnerable?\n\n#### [`bittorrent-dht`](https://www.npmjs.com/package/bittorrent-dht)\n\n[Mathias Buus](https://github.com/mafintosh) and I\n([Feross Aboukhadijeh](http://feross.org/)) found this issue in one of our own packages,\n[`bittorrent-dht`](https://www.npmjs.com/package/bittorrent-dht). The bug would allow\nanyone on the internet to send a series of messages to a user of `bittorrent-dht` and get\nthem to reveal 20 bytes at a time of uninitialized memory from the node.js process.\n\nHere's\n[the commit](https://github.com/feross/bittorrent-dht/commit/6c7da04025d5633699800a99ec3fbadf70ad35b8)\nthat fixed it. We released a new fixed version, created a\n[Node Security Project disclosure](https://nodesecurity.io/advisories/68), and deprecated all\nvulnerable versions on npm so users will get a warning to upgrade to a newer version.\n\n#### [`ws`](https://www.npmjs.com/package/ws)\n\nThat got us wondering if there were other vulnerable packages. Sure enough, within a short\nperiod of time, we found the same issue in [`ws`](https://www.npmjs.com/package/ws), the\nmost popular WebSocket implementation in node.js.\n\nIf certain APIs were called with `Number` parameters instead of `String` or `Buffer` as\nexpected, then uninitialized server memory would be disclosed to the remote peer.\n\nThese were the vulnerable methods:\n\n```js\nsocket.send(number)\nsocket.ping(number)\nsocket.pong(number)\n```\n\nHere's a vulnerable socket server with some echo functionality:\n\n```js\nserver.on('connection', function (socket) {\n  socket.on('message', function (message) {\n    message = JSON.parse(message)\n    if (message.type === 'echo') {\n      socket.send(message.data) // send back the user's message\n    }\n  })\n})\n```\n\n`socket.send(number)` called on the server, will disclose server memory.\n\nHere's [the release](https://github.com/websockets/ws/releases/tag/1.0.1) where the issue\nwas fixed, with a more detailed explanation. Props to\n[Arnout Kazemier](https://github.com/3rd-Eden) for the quick fix. Here's the\n[Node Security Project disclosure](https://nodesecurity.io/advisories/67).\n\n\n### What's the solution?\n\nIt's important that node.js offers a fast way to get memory otherwise performance-critical\napplications would needlessly get a lot slower.\n\nBut we need a better way to *signal our intent* as programmers. **When we want\nuninitialized memory, we should request it explicitly.**\n\nSensitive functionality should not be packed into a developer-friendly API that loosely\naccepts many different types. This type of API encourages the lazy practice of passing\nvariables in without checking the type very carefully.\n\n#### A new API: `Buffer.allocUnsafe(number)`\n\nThe functionality of creating buffers with uninitialized memory should be part of another\nAPI. We propose `Buffer.allocUnsafe(number)`. This way, it's not part of an API that\nfrequently gets user input of all sorts of different types passed into it.\n\n```js\nvar buf = Buffer.allocUnsafe(16) // careful, uninitialized memory!\n\n// Immediately overwrite the uninitialized buffer with data from another buffer\nfor (var i = 0; i < buf.length; i++) {\n  buf[i] = otherBuf[i]\n}\n```\n\n\n### How do we fix node.js core?\n\nWe sent [a PR to node.js core](https://github.com/nodejs/node/pull/4514) (merged as\n`semver-major`) which defends against one case:\n\n```js\nvar str = 16\nnew Buffer(str, 'utf8')\n```\n\nIn this situation, it's implied that the programmer intended the first argument to be a\nstring, since they passed an encoding as a second argument. Today, node.js will allocate\nuninitialized memory in the case of `new Buffer(number, encoding)`, which is probably not\nwhat the programmer intended.\n\nBut this is only a partial solution, since if the programmer does `new Buffer(variable)`\n(without an `encoding` parameter) there's no way to know what they intended. If `variable`\nis sometimes a number, then uninitialized memory will sometimes be returned.\n\n### What's the real long-term fix?\n\nWe could deprecate and remove `new Buffer(number)` and use `Buffer.allocUnsafe(number)` when\nwe need uninitialized memory. But that would break 1000s of packages.\n\n~~We believe the best solution is to:~~\n\n~~1. Change `new Buffer(number)` to return safe, zeroed-out memory~~\n\n~~2. Create a new API for creating uninitialized Buffers. We propose: `Buffer.allocUnsafe(number)`~~\n\n#### Update\n\nWe now support adding three new APIs:\n\n- `Buffer.from(value)` - convert from any type to a buffer\n- `Buffer.alloc(size)` - create a zero-filled buffer\n- `Buffer.allocUnsafe(size)` - create an uninitialized buffer with given size\n\nThis solves the core problem that affected `ws` and `bittorrent-dht` which is\n`Buffer(variable)` getting tricked into taking a number argument.\n\nThis way, existing code continues working and the impact on the npm ecosystem will be\nminimal. Over time, npm maintainers can migrate performance-critical code to use\n`Buffer.allocUnsafe(number)` instead of `new Buffer(number)`.\n\n\n### Conclusion\n\nWe think there's a serious design issue with the `Buffer` API as it exists today. It\npromotes insecure software by putting high-risk functionality into a convenient API\nwith friendly \"developer ergonomics\".\n\nThis wasn't merely a theoretical exercise because we found the issue in some of the\nmost popular npm packages.\n\nFortunately, there's an easy fix that can be applied today. Use `safe-buffer` in place of\n`buffer`.\n\n```js\nvar Buffer = require('safe-buffer').Buffer\n```\n\nEventually, we hope that node.js core can switch to this new, safer behavior. We believe\nthe impact on the ecosystem would be minimal since it's not a breaking change.\nWell-maintained, popular packages would be updated to use `Buffer.alloc` quickly, while\nolder, insecure packages would magically become safe from this attack vector.\n\n\n## links\n\n- [Node.js PR: buffer: throw if both length and enc are passed](https://github.com/nodejs/node/pull/4514)\n- [Node Security Project disclosure for `ws`](https://nodesecurity.io/advisories/67)\n- [Node Security Project disclosure for`bittorrent-dht`](https://nodesecurity.io/advisories/68)\n\n\n## credit\n\nThe original issues in `bittorrent-dht`\n([disclosure](https://nodesecurity.io/advisories/68)) and\n`ws` ([disclosure](https://nodesecurity.io/advisories/67)) were discovered by\n[Mathias Buus](https://github.com/mafintosh) and\n[Feross Aboukhadijeh](http://feross.org/).\n\nThanks to [Adam Baldwin](https://github.com/evilpacket) for helping disclose these issues\nand for his work running the [Node Security Project](https://nodesecurity.io/).\n\nThanks to [John Hiesey](https://github.com/jhiesey) for proofreading this README and\nauditing the code.\n\n\n## license\n\nMIT. Copyright (C) [Feross Aboukhadijeh](http://feross.org)",
   "_attachments": {}