mcp-3d-printer-server 1.2.20 → 1.2.22

package/src/printers/generic-base.ts

@@ -1,7 +1,7 @@
 import fs from "node:fs/promises";
 import os from "node:os";
 import path from "node:path";
-import { randomUUID } from "node:crypto";
+import { createHash, randomUUID } from "node:crypto";
 import type { AxiosInstance } from "axios";
 import { PrinterImplementation } from "../types.js";
 import { cancelPendingPrinterOperations, withPrinterOperation } from "../safety/artifact.js";
@@ -17,6 +17,15 @@ import {
   type GenericPrintInspection,
   type Heater,
 } from "../safety/gcode-thermal.js";
+import type { CounterpartProgress, FilamentSlot, PrinterIdentity } from "../counterpart/contract.js";
+
+/** A camera snapshot URL as the firmware configures it, before resolution against the printer host. */
+export interface SnapshotCandidate {
+  url: string;
+  source: string;
+  /** True when the firmware's own settings name this URL; false for a conventional fallback. */
+  configured: boolean;
+}
 
 /** Normalized adapter state used by the print and heating preflight. */
 export interface GenericPrinterState {
@@ -45,15 +54,172 @@ export const REMOTE_DOWNLOAD_TIMEOUT_MS = 120_000;
  * uploaded, check fresh adapter state, ask a human (MCP elicitation), recheck
  * state and only then dispatch. Heater-off and cancel are never gated.
  */
+/** seenRunning: a report showed this job printing or paused, so a later ended report is about it, not about the previous job. */
+type CheckedJob = { name: string; sha256: string; peaks: GenericPrintInspection["peaks"]; materials: string[]; seenRunning: boolean };
+const checkedJob = (name: string, inspection: GenericPrintInspection): CheckedJob =>
+  ({ name, sha256: inspection.sha256, peaks: inspection.peaks, materials: inspection.materials, seenRunning: false });
+const RUNNING_STATES = new Set<string>(["preparing", "printing", "paused"]);
+/** Reports after which the checked job can no longer be resumed. */
+const ENDED_STATES = new Set<string>(["idle", "finished", "cancelled", "failed"]);
+
 export abstract class GenericPrinterImplementation extends PrinterImplementation {
   protected abstract readonly printerLabel: string;
   /** True when rawUploadFile(print=true) starts the uploaded bytes atomically. */
   protected readonly uploadStartsPrint: boolean = false;
 
+  /**
+   * The last job this server instance inspected and started, per printer.
+   * Cleared by cancel and by a report that the job ended, so a later job
+   * reusing the name is never resumed on this record.
+   */
+  private readonly checkedJobs = new Map<string, CheckedJob>();
+
   constructor(apiClient: AxiosInstance, private readonly confirm?: ConfirmHardware) {
     super(apiClient);
   }
 
+  // ---- Counterpart contract (counterpart/1) ----
+
+  /** Normalized progress for counterpart_print_progress; throws when the printer cannot be read. */
+  abstract counterpartProgress(host: string, port: string, apiKey: string): Promise<CounterpartProgress>;
+
+  /** Progress that also retires the resume record once the printer reports the job ended. */
+  async observedProgress(host: string, port: string, apiKey: string): Promise<CounterpartProgress> {
+    const progress = await this.counterpartProgress(host, port, apiKey);
+    const key = this.operationKey(host, port);
+    const checked = this.checkedJobs.get(key);
+    if (checked && RUNNING_STATES.has(progress.state) && progress.job?.name === checked.name) checked.seenRunning = true;
+    else if (checked?.seenRunning && (ENDED_STATES.has(progress.state) || (RUNNING_STATES.has(progress.state) && progress.job?.name !== undefined))) {
+      this.checkedJobs.delete(key);
+    }
+    return progress;
+  }
+
+  /** Optional identity fields; failures are ignored by the caller. */
+  async counterpartIdentity(_host: string, _port: string, _apiKey: string): Promise<PrinterIdentity> {
+    return {};
+  }
+
+  /** Snapshot URLs from the firmware's own settings, in preference order. */
+  async snapshotCandidates(_host: string, _port: string, _apiKey: string): Promise<SnapshotCandidate[]> {
+    return [];
+  }
+
+  /** The single extruder slot; adapters with a spool manager override this. */
+  async counterpartFilaments(_host: string, _port: string, _apiKey: string): Promise<FilamentSlot[]> {
+    return [{ id: "ext", source: "unknown" }];
+  }
+
+  /** Whether progress reports carry layer numbers on this firmware. */
+  async reportsLayers(_host: string, _port: string, _apiKey: string): Promise<boolean> {
+    return false;
+  }
+
+  async supportsPauseResume(_host: string, _port: string, _apiKey: string): Promise<boolean> {
+    return this.rawPauseJob !== undefined && this.rawResumeJob !== undefined;
+  }
+
+  protected rawPauseJob?(host: string, port: string, apiKey: string): Promise<unknown>;
+  protected rawResumeJob?(host: string, port: string, apiKey: string): Promise<unknown>;
+
+  /** Pause is never gated, like cancel and heater-off. */
+  async pauseJob(host: string, port: string, apiKey: string): Promise<{ status: string; action: "pause"; message: string }> {
+    if (!(await this.supportsPauseResume(host, port, apiKey)) || !this.rawPauseJob) {
+      throw new Error(`Unsupported: ${this.printerLabel} has no verified pause route in this server.`);
+    }
+    await this.rawPauseJob(host, port, apiKey);
+    return { status: "success", action: "pause", message: `Pause command sent to ${this.printerLabel} (${host}:${port}).` };
+  }
+
+  /**
+   * Resume reheats and moves the printer, so it is gated like a print start:
+   * only the job this server instance inspected and started, only while the
+   * printer freshly reports that job paused, with its bytes re-read and
+   * compared where the firmware can download them, and after human
+   * confirmation (unless the server opted out). A stop or heater-off request
+   * in the meantime cancels it.
+   */
+  async resumeJob(host: string, port: string, apiKey: string): Promise<{ status: string; action: "resume"; message: string; jobName: string; bytesVerified: boolean }> {
+    if (!(await this.supportsPauseResume(host, port, apiKey)) || !this.rawResumeJob) {
+      throw new Error(`Unsupported: ${this.printerLabel} has no verified resume route in this server.`);
+    }
+    const key = this.operationKey(host, port);
+    return withPrinterOperation(host, key, async (assertActive) => {
+      const checked = this.checkedJobs.get(key);
+      if (!checked) {
+        throw new Error(
+          `Print safety: resume_print only resumes a job this server instance inspected and started on ${this.printerLabel}; nothing was sent. ` +
+          "Check the paused job at the printer and resume it there."
+        );
+      }
+      await this.assertPausedJob(host, port, apiKey, checked.name);
+      let bytesVerified = false;
+      if (this.downloadRemoteFile) {
+        const sha256 = await this.remoteSha256(host, port, apiKey, checked.name).catch(() => {
+          throw new Error(`Print safety: could not re-read ${checked.name} from ${this.printerLabel} to confirm it is the inspected file; nothing was sent. Resume it at the printer.`);
+        });
+        if (sha256 !== checked.sha256) {
+          this.checkedJobs.delete(key);
+          throw new Error(`Print safety: ${checked.name} on ${this.printerLabel} is no longer the file this server inspected (SHA-256 changed); nothing was sent.`);
+        }
+        bytesVerified = true;
+      }
+      assertActive();
+      await requireHumanConfirmation(
+        this.confirm,
+        `Resume ${checked.name} on ${this.printerLabel} (${host}:${port})? It reheats to its targets (peak nozzle ${checked.peaks.nozzle}°C, ` +
+        `bed ${checked.peaks.bed}°C, chamber ${checked.peaks.chamber}°C) and moves. Materials: ${checked.materials.length ? checked.materials.join(", ") : "none declared"}. ` +
+        `File SHA-256: ${checked.sha256}${bytesVerified ? " (re-read from the printer)" : " (this firmware cannot re-read the file; matched by name)"}. ` +
+        "Confirm the nozzle path is clear and the filament is still loaded.",
+        "generic"
+      );
+      assertActive();
+      // Someone may have resumed or stopped it at the printer while the prompt was open.
+      await this.assertPausedJob(host, port, apiKey, checked.name);
+      // A progress read during the prompt may have retired this record (the job ended, and a new one
+      // could now be paused under the same name); only the record that was confirmed may be resumed.
+      if (this.checkedJobs.get(key) !== checked) {
+        throw new Error(`Print safety: ${checked.name} ended on ${this.printerLabel} while the confirmation was open; nothing was sent.`);
+      }
+      assertActive();
+      await this.rawResumeJob!(host, port, apiKey);
+      return {
+        status: "success",
+        action: "resume",
+        message: `Resume command sent to ${this.printerLabel} (${host}:${port}) for ${checked.name}.`,
+        jobName: checked.name,
+        bytesVerified,
+      };
+    });
+  }
+
+  private async assertPausedJob(host: string, port: string, apiKey: string, name: string): Promise<void> {
+    const progress = await this.observedProgress(host, port, apiKey);
+    if (progress.state === "paused" && progress.job?.stage === "Pausing") {
+      // OctoPrint accepts a resume while still pausing and then drops it.
+      throw new Error(`Print safety: ${this.printerLabel} is still pausing; nothing was sent. Resume once it reports paused.`);
+    }
+    if (progress.state !== "paused") {
+      throw new Error(`Print safety: ${this.printerLabel} reports '${progress.state}', not a paused job; nothing was sent.`);
+    }
+    if (progress.job?.name !== name) {
+      throw new Error(
+        `Print safety: the paused job (${progress.job?.name ?? "unknown"}) does not match the job this server started (${name}); nothing was sent.`
+      );
+    }
+  }
+
+  private async remoteSha256(host: string, port: string, apiKey: string, name: string): Promise<string> {
+    const directory = await fs.mkdtemp(path.join(os.tmpdir(), "printer-resume-"));
+    try {
+      const destination = path.join(directory, "job.gcode");
+      await this.downloadRemoteFile!(host, port, apiKey, name, destination);
+      return createHash("sha256").update(await fs.readFile(destination)).digest("hex");
+    } finally {
+      await fs.rm(directory, { recursive: true, force: true });
+    }
+  }
+
   protected abstract rawUploadFile(host: string, port: string, apiKey: string, filePath: string, filename: string, print: boolean): Promise<any>;
   protected abstract rawStartJob(host: string, port: string, apiKey: string, filename: string): Promise<any>;
   protected abstract rawCancelJob(host: string, port: string, apiKey: string): Promise<any>;
@@ -91,6 +257,8 @@ export abstract class GenericPrinterImplementation extends PrinterImplementation
 
   async cancelJob(host: string, port: string, apiKey: string): Promise<any> {
     cancelPendingPrinterOperations(host, this.operationKey(host, port));
+    // A cancelled job is never resumed, even if a later job reuses its name.
+    this.checkedJobs.delete(this.operationKey(host, port));
     return this.rawCancelJob(host, port, apiKey);
   }
 
@@ -241,6 +409,7 @@ export abstract class GenericPrinterImplementation extends PrinterImplementation
       status: "success",
       printRequested: true,
       remotePath: remoteName,
+      jobName: remoteName,
       sha256: inspection.sha256,
       materials: inspection.materials,
       peakTemperatures: inspection.peaks,
@@ -258,6 +427,7 @@ export abstract class GenericPrinterImplementation extends PrinterImplementation
       if (!this.uploadStartedPrint(response)) {
         throw new Error(`${this.printerLabel} stored ${remoteName} but reports that it did not start printing it.`);
       }
+      this.checkedJobs.set(this.operationKey(host, port), checkedJob(remoteName, inspection));
       return { ...summary, response };
     }
     const upload = await this.rawUploadFile(host, port, apiKey, snapshot, remoteName, false);
@@ -270,6 +440,7 @@ export abstract class GenericPrinterImplementation extends PrinterImplementation
     this.assertBedClearance(dispatch, initial.finishedJob);
     assertActive();
     const response = await this.rawStartJob(host, port, apiKey, remoteName);
+    this.checkedJobs.set(this.operationKey(host, port), checkedJob(remoteName, inspection));
     return { ...summary, upload, response };
   }
 

package/src/printers/klipper.ts

@@ -1,13 +1,129 @@
 import fs from "fs";
 import FormData from "form-data";
-import { GenericPrinterImplementation, type GenericPrinterState } from "./generic-base.js";
+import { isAxiosError } from "axios";
+import { GenericPrinterImplementation, type GenericPrinterState, type SnapshotCandidate } from "./generic-base.js";
+import type { CounterpartProgress, FilamentSlot, PrinterIdentity } from "../counterpart/contract.js";
+import { finiteNumber, nonEmptyText } from "../counterpart/contract.js";
+import { mapMoonraker } from "../counterpart/progress.js";
+
+const PROGRESS_QUERY = "print_stats&virtual_sdcard&display_status&extruder&heater_bed&webhooks";
+const ESTIMATE_TTL_MS = 10 * 60_000;
+export const MACRO_TIMEOUT_MS = 60_000;
 
 function encodePath(filename: string): string {
   return filename.replace(/^\/+/, "").split("/").map(encodeURIComponent).join("/");
 }
 
 export class KlipperImplementation extends GenericPrinterImplementation {
-  protected readonly printerLabel = "Klipper/Moonraker";
+  protected readonly printerLabel: string = "Klipper/Moonraker";
+  /** Slicer estimates by host:port:filename, so a poll does not re-read file metadata. */
+  private readonly estimates = new Map<string, { value?: number; at: number }>();
+
+  /**
+   * One object query; remaining time is the file's slicer estimate minus
+   * print_duration. https://moonraker.readthedocs.io/en/latest/external_api/printer/
+   * and .../external_api/file_manager/ (estimated_time, seconds).
+   */
+  async counterpartProgress(host: string, port: string, apiKey: string): Promise<CounterpartProgress> {
+    const data = (await this.apiClient.get(`http://${host}:${port}/printer/objects/query?${PROGRESS_QUERY}`, this.authHeaders(apiKey))).data;
+    const observedAt = new Date().toISOString();
+    const status = data?.result?.status;
+    if (!status || typeof status !== "object") throw new Error("Moonraker returned no printer object status.");
+    const stats = status.print_stats ?? {};
+    const filename = nonEmptyText(stats.filename);
+    const estimate = filename && (stats.state === "printing" || stats.state === "paused")
+      ? await this.estimatedTime(host, port, apiKey, filename)
+      : undefined;
+    return mapMoonraker(status, estimate, observedAt);
+  }
+
+  private async estimatedTime(host: string, port: string, apiKey: string, filename: string): Promise<number | undefined> {
+    const key = `${host}:${port}:${filename}`;
+    const cached = this.estimates.get(key);
+    if (cached && Date.now() - cached.at < ESTIMATE_TTL_MS) return cached.value;
+    let value: number | undefined;
+    try {
+      const metadata = (await this.apiClient.get(
+        `http://${host}:${port}/server/files/metadata?filename=${encodeURIComponent(filename)}`,
+        this.authHeaders(apiKey)
+      )).data;
+      const estimate = finiteNumber(metadata?.result?.estimated_time ?? metadata?.estimated_time);
+      value = estimate !== undefined && estimate > 0 ? estimate : undefined;
+    } catch {
+      value = undefined;
+    }
+    if (this.estimates.size > 64) this.estimates.clear();
+    this.estimates.set(key, { value, at: Date.now() });
+    return value;
+  }
+
+  async reportsLayers(): Promise<boolean> {
+    return true;
+  }
+
+  /**
+   * GET /server/webcams/list: enabled webcams' snapshot_url, which may be a
+   * path relative to the host. https://moonraker.readthedocs.io/en/latest/external_api/webcams/
+   */
+  async snapshotCandidates(host: string, port: string, apiKey: string): Promise<SnapshotCandidate[]> {
+    const data = (await this.apiClient.get(`http://${host}:${port}/server/webcams/list`, this.authHeaders(apiKey))).data;
+    const webcams = Array.isArray(data?.result?.webcams) ? data.result.webcams : [];
+    return webcams
+      .filter((webcam: any) => webcam?.enabled !== false && nonEmptyText(webcam?.snapshot_url))
+      .map((webcam: any) => ({ url: String(webcam.snapshot_url).trim(), source: "moonraker-webcam", configured: true }));
+  }
+
+  /**
+   * Spoolman through Moonraker: GET /server/spoolman/spool_id, then the proxy
+   * for /v1/spool/<id>. https://moonraker.readthedocs.io/en/latest/external_api/integrations/
+   * Spoolman color_hex has no '#'. Without Spoolman (404, null id) the slot is unknown.
+   */
+  async counterpartFilaments(host: string, port: string, apiKey: string): Promise<FilamentSlot[]> {
+    const unknown: FilamentSlot[] = [{ id: "ext", source: "unknown" }];
+    let spoolId: number | undefined;
+    try {
+      const active = (await this.apiClient.get(`http://${host}:${port}/server/spoolman/spool_id`, this.authHeaders(apiKey))).data;
+      spoolId = finiteNumber(active?.result?.spool_id);
+    } catch (error) {
+      if (isAxiosError(error) && error.response) return unknown;
+      throw error;
+    }
+    if (spoolId === undefined) return unknown;
+    const proxied = (await this.apiClient.post(
+      `http://${host}:${port}/server/spoolman/proxy`,
+      { request_method: "GET", path: `/v1/spool/${spoolId}` } as any,
+      this.authHeaders(apiKey)
+    )).data;
+    // v1 responses return the spool directly; use_v2_response wraps it in {response, error}.
+    const spool = proxied?.result?.response ?? proxied?.result;
+    const filament = spool?.filament ?? {};
+    const hex = nonEmptyText(filament.color_hex)?.replace(/^#/, "");
+    return [{
+      id: "ext",
+      material: nonEmptyText(filament.material),
+      color: hex && /^[0-9a-f]{6}$/i.test(hex) ? `#${hex.toUpperCase()}` : undefined,
+      name: nonEmptyText(filament.name),
+      source: "spoolman",
+    }];
+  }
+
+  async counterpartIdentity(host: string, port: string, apiKey: string): Promise<PrinterIdentity> {
+    const info = (await this.apiClient.get(`http://${host}:${port}/printer/info`, this.authHeaders(apiKey))).data;
+    return { name: nonEmptyText(info?.result?.hostname) };
+  }
+
+  /**
+   * POST /printer/print/pause and /printer/print/resume (Moonraker printer API).
+   * Moonraker answers after the PAUSE/RESUME macro finishes (parking, retract),
+   * which can exceed the shared 10 s client timeout.
+   */
+  protected async rawPauseJob(host: string, port: string, apiKey: string) {
+    return (await this.apiClient.post(`http://${host}:${port}/printer/print/pause`, null as any, { ...this.authHeaders(apiKey), timeout: MACRO_TIMEOUT_MS })).data;
+  }
+
+  protected async rawResumeJob(host: string, port: string, apiKey: string) {
+    return (await this.apiClient.post(`http://${host}:${port}/printer/print/resume`, null as any, { ...this.authHeaders(apiKey), timeout: MACRO_TIMEOUT_MS })).data;
+  }
 
   protected authHeaders(apiKey: string): Record<string, unknown> {
     return apiKey ? { headers: { "X-Api-Key": apiKey } } : {};

package/src/printers/octoprint.ts

@@ -1,7 +1,10 @@
 import fs from "fs";
 import FormData from "form-data";
 import { isAxiosError } from "axios";
-import { GenericPrinterImplementation, type GenericPrinterState, type HeaterComponent } from "./generic-base.js";
+import { GenericPrinterImplementation, type GenericPrinterState, type HeaterComponent, type SnapshotCandidate } from "./generic-base.js";
+import type { CounterpartProgress, PrinterIdentity } from "../counterpart/contract.js";
+import { nonEmptyText } from "../counterpart/contract.js";
+import { mapOctoPrint } from "../counterpart/progress.js";
 
 const BLOCKING_FLAGS = ["printing", "paused", "pausing", "cancelling", "resuming", "finishing", "error", "closedOrError"];
 
@@ -14,6 +17,88 @@ export class OctoPrintImplementation extends GenericPrinterImplementation {
   // POST /api/files/local with print=true uploads and starts the same bytes.
   protected readonly uploadStartsPrint = true;
 
+  /**
+   * GET /api/job plus GET /api/printer (temperatures; 409 when not
+   * operational). An Operational job with no progress reads the file's print
+   * history so a cancelled job is reported as cancelled.
+   * https://docs.octoprint.org/en/master/api/job.html
+   */
+  async counterpartProgress(host: string, port: string, apiKey: string): Promise<CounterpartProgress> {
+    const base = `http://${host}:${port}`;
+    const headers = { "X-Api-Key": apiKey };
+    const job = (await this.apiClient.get(`${base}/api/job`, { headers })).data;
+    let printer: any;
+    try {
+      printer = (await this.apiClient.get(`${base}/api/printer`, { headers })).data;
+    } catch (error) {
+      if (!(isAxiosError(error) && error.response?.status === 409)) throw error;
+    }
+    const observedAt = new Date().toISOString();
+    let lastPrint: { success?: unknown } | undefined;
+    const file = job?.job?.file;
+    if (String(job?.state ?? "").toLowerCase() === "operational" && typeof file?.path === "string" && file.path &&
+        (job?.progress?.completion === null || job?.progress?.completion === undefined)) {
+      const origin = file.origin === "sdcard" ? "sdcard" : "local";
+      lastPrint = await this.apiClient.get(`${base}/api/files/${origin}/${encodePath(file.path)}`, { headers })
+        .then((response) => response.data?.prints?.last)
+        .catch(() => undefined);
+    }
+    return mapOctoPrint({ job, printer, lastPrint }, observedAt);
+  }
+
+  /**
+   * Snapshot URL from GET /api/settings: the bundled Classic Webcam plugin's
+   * plugins.classicwebcam.snapshot on 1.9+, webcam.snapshotUrl on 1.8 and
+   * earlier (1.9+ still fills it through its compatibility layer), then the
+   * OctoPi convention http://host/webcam/?action=snapshot.
+   * Source: OctoPrint src/octoprint/server/api/settings.py and
+   * src/octoprint/plugins/classicwebcam/__init__.py; checked on 1.8.7 and 1.11.2.
+   */
+  async snapshotCandidates(host: string, port: string, apiKey: string): Promise<SnapshotCandidate[]> {
+    const settings = (await this.apiClient.get(`http://${host}:${port}/api/settings`, { headers: { "X-Api-Key": apiKey } })).data;
+    const candidates: SnapshotCandidate[] = [];
+    if (settings?.webcam?.webcamEnabled !== false) {
+      const configured = [
+        settings?.plugins?.classicwebcam?.snapshot,
+        settings?.webcam?.snapshotUrl,
+        ...(Array.isArray(settings?.webcam?.webcams) ? settings.webcam.webcams.map((webcam: any) => webcam?.compat?.snapshot) : []),
+      ];
+      for (const url of configured) {
+        const text = nonEmptyText(url);
+        if (text) candidates.push({ url: text, source: "octoprint-settings", configured: true });
+      }
+    }
+    candidates.push({ url: `http://${host}/webcam/?action=snapshot`, source: "octoprint-fallback", configured: false });
+    return candidates;
+  }
+
+  async counterpartIdentity(host: string, port: string, apiKey: string): Promise<PrinterIdentity> {
+    const headers = { "X-Api-Key": apiKey };
+    const [profiles, settings] = await Promise.all([
+      this.apiClient.get(`http://${host}:${port}/api/printerprofiles`, { headers }).then((r) => r.data).catch(() => undefined),
+      this.apiClient.get(`http://${host}:${port}/api/settings`, { headers }).then((r) => r.data).catch(() => undefined),
+    ]);
+    const all = Object.values(profiles?.profiles ?? {}) as any[];
+    const profile = all.find((entry) => entry?.current) ?? all.find((entry) => entry?.default);
+    return { model: nonEmptyText(profile?.model), name: nonEmptyText(settings?.appearance?.name) ?? nonEmptyText(profile?.name) };
+  }
+
+  /** POST /api/job {command:"pause", action:"pause"|"resume"}; 204 on success, 409 without an active job. */
+  protected async rawPauseJob(host: string, port: string, apiKey: string) {
+    return this.jobCommand(host, port, apiKey, { command: "pause", action: "pause" });
+  }
+
+  protected async rawResumeJob(host: string, port: string, apiKey: string) {
+    return this.jobCommand(host, port, apiKey, { command: "pause", action: "resume" });
+  }
+
+  private async jobCommand(host: string, port: string, apiKey: string, body: Record<string, string>) {
+    const response = await this.apiClient.post(`http://${host}:${port}/api/job`, body as any, {
+      headers: { "X-Api-Key": apiKey, "Content-Type": "application/json" },
+    });
+    return response.data;
+  }
+
   async getStatus(host: string, port: string, apiKey: string) {
     const url = `http://${host}:${port}/api/printer`;
     const response = await this.apiClient.get(url, {

package/src/printers/prusa.ts

@@ -1,5 +1,8 @@
 import { isAxiosError, type AxiosRequestConfig, type AxiosResponse } from "axios";
 import { GenericPrinterImplementation, type GenericPrinterState, type HeaterComponent } from "./generic-base.js";
+import type { CounterpartProgress, PrinterIdentity } from "../counterpart/contract.js";
+import { finiteNumber, nonEmptyText } from "../counterpart/contract.js";
+import { mapOctoPrint, mapPrusaLink } from "../counterpart/progress.js";
 import fs from "fs";
 import FormData from "form-data";
 
@@ -124,6 +127,63 @@ export class PrusaImplementation extends GenericPrinterImplementation {
     throw lastError ?? new Error("No compatible Prusa POST endpoint found.");
   }
 
+  /**
+   * PrusaLink GET /api/v1/status, plus GET /api/v1/job for the file name
+   * (204 when there is no job). Older firmware without /api/v1 uses the
+   * OctoPrint-compatible /api/job and /api/printer.
+   * https://github.com/prusa3d/Prusa-Link-Web/blob/master/spec/openapi.yaml
+   */
+  async counterpartProgress(host: string, port: string, apiKey: string): Promise<CounterpartProgress> {
+    const baseUrl = this.buildBaseUrl(host, port);
+    const headers = this.buildAuthHeaders(apiKey);
+    let status: any;
+    try {
+      status = (await this.apiClient.get(`${baseUrl}/api/v1/status`, { headers })).data;
+    } catch (error) {
+      if (!this.isFallbackStatus(error)) throw error;
+      const job = (await this.apiClient.get(`${baseUrl}/api/job`, { headers })).data;
+      const printer = await this.apiClient.get(`${baseUrl}/api/printer`, { headers }).then((r) => r.data).catch(() => undefined);
+      return mapOctoPrint({ job, printer }, new Date().toISOString());
+    }
+    const observedAt = new Date().toISOString();
+    let job: any;
+    if (status?.job && finiteNumber(status.job.id) !== undefined) {
+      const response = await this.apiClient.get(`${baseUrl}/api/v1/job`, { headers }).catch(() => undefined);
+      job = response?.status === 200 ? response.data : undefined;
+    }
+    return mapPrusaLink(status, job, observedAt);
+  }
+
+  async counterpartIdentity(host: string, port: string, apiKey: string): Promise<PrinterIdentity> {
+    const info = (await this.apiClient.get(`${this.buildBaseUrl(host, port)}/api/v1/info`, { headers: this.buildAuthHeaders(apiKey) })).data;
+    return { name: nonEmptyText(info?.name) ?? nonEmptyText(info?.hostname), serial: nonEmptyText(info?.serial) };
+  }
+
+  /** PUT /api/v1/job/{id}/pause; the OctoPrint-compatible POST /api/job on older firmware. */
+  protected async rawPauseJob(host: string, port: string, apiKey: string) {
+    return this.jobControl(host, port, apiKey, "pause");
+  }
+
+  protected async rawResumeJob(host: string, port: string, apiKey: string) {
+    return this.jobControl(host, port, apiKey, "resume");
+  }
+
+  private async jobControl(host: string, port: string, apiKey: string, action: "pause" | "resume") {
+    const baseUrl = this.buildBaseUrl(host, port);
+    const headers = this.buildAuthHeaders(apiKey);
+    let id: number | undefined;
+    try {
+      id = finiteNumber((await this.apiClient.get(`${baseUrl}/api/v1/status`, { headers })).data?.job?.id);
+    } catch (error) {
+      if (!this.isFallbackStatus(error)) throw error;
+      const response = await this.apiClient.post(`${baseUrl}/api/job`, { command: "pause", action } as any, { headers });
+      return response.data;
+    }
+    if (id === undefined) throw new Error(`PrusaLink reports no current job to ${action}; nothing was sent.`);
+    const response = await this.apiClient.put(`${baseUrl}/api/v1/job/${id}/${action}`, undefined, { headers });
+    return response.data;
+  }
+
   async getStatus(host: string, port: string, apiKey: string) {
     const response = await this.getWithFallback(host, port, apiKey, [
       "/api/v1/status",

package/src/printers/repetier.ts

@@ -1,6 +1,9 @@
 import fs from "fs";
 import FormData from "form-data";
-import { GenericPrinterImplementation, type GenericPrinterState } from "./generic-base.js";
+import { GenericPrinterImplementation, type GenericPrinterState, type SnapshotCandidate } from "./generic-base.js";
+import type { CounterpartProgress, PrinterIdentity } from "../counterpart/contract.js";
+import { nonEmptyText } from "../counterpart/contract.js";
+import { mapRepetier } from "../counterpart/progress.js";
 
 /**
  * Note: Repetier-Server documents printer commands at /printer/api/<slug>;
@@ -12,6 +15,65 @@ export class RepetierImplementation extends GenericPrinterImplementation {
   // The upload form's print=1 flag uploads and starts the same bytes.
   protected readonly uploadStartsPrint = true;
 
+  /**
+   * The printer the counterpart tools address: REPETIER_SLUG when set,
+   * otherwise the only printer listPrinter reports.
+   * REST form: /printer/api/<slug>?a=<command>&data=<json>&apikey=<key>
+   * (https://www.repetier-server.com/manuals/programming/API/index.html).
+   */
+  private async selectPrinter(host: string, port: string, apiKey: string): Promise<{ slug: string; entry: any }> {
+    const wanted = process.env.REPETIER_SLUG?.trim();
+    const route = wanted ? encodeURIComponent(wanted) : "";
+    const data = (await this.apiClient.get(`http://${host}:${port}/printer/api/${route}?a=listPrinter&apikey=${encodeURIComponent(apiKey)}`)).data;
+    const printers: any[] = Array.isArray(data) ? data : Array.isArray(data?.data) ? data.data : [];
+    if (wanted) {
+      const entry = printers.find((printer) => printer?.slug === wanted);
+      if (!entry) throw new Error(`Repetier lists no printer with slug "${wanted}" (REPETIER_SLUG).`);
+      return { slug: wanted, entry };
+    }
+    if (printers.length !== 1 || typeof printers[0]?.slug !== "string") {
+      throw new Error(`Repetier reports ${printers.length} printers; set REPETIER_SLUG to the printer's slug.`);
+    }
+    return { slug: printers[0].slug, entry: printers[0] };
+  }
+
+  private printerUrl(host: string, port: string, apiKey: string, slug: string, action: string, data?: unknown): string {
+    const query = `a=${action}${data === undefined ? "" : `&data=${encodeURIComponent(JSON.stringify(data))}`}&apikey=${encodeURIComponent(apiKey)}`;
+    return `http://${host}:${port}/printer/api/${encodeURIComponent(slug)}?${query}`;
+  }
+
+  async counterpartProgress(host: string, port: string, apiKey: string): Promise<CounterpartProgress> {
+    const { entry } = await this.selectPrinter(host, port, apiKey);
+    return mapRepetier(entry, new Date().toISOString());
+  }
+
+  async counterpartIdentity(host: string, port: string, apiKey: string): Promise<PrinterIdentity> {
+    const { entry, slug } = await this.selectPrinter(host, port, apiKey);
+    return { name: nonEmptyText(entry?.name) ?? slug };
+  }
+
+  /** getPrinterConfig webcams[].staticUrl (older servers: a single webcam object). */
+  async snapshotCandidates(host: string, port: string, apiKey: string): Promise<SnapshotCandidate[]> {
+    const { slug } = await this.selectPrinter(host, port, apiKey);
+    const config = (await this.apiClient.get(this.printerUrl(host, port, apiKey, slug, "getPrinterConfig"))).data;
+    const webcams = Array.isArray(config?.webcams) ? config.webcams : config?.webcam ? [config.webcam] : [];
+    return webcams
+      .map((webcam: any) => nonEmptyText(webcam?.staticUrl))
+      .filter((url: string | undefined): url is string => url !== undefined)
+      .map((url: string) => ({ url, source: "repetier-webcam", configured: true }));
+  }
+
+  /** Pause sends the @pause host command; resume is the documented continueJob. */
+  protected async rawPauseJob(host: string, port: string, apiKey: string) {
+    const { slug } = await this.selectPrinter(host, port, apiKey);
+    return (await this.apiClient.get(this.printerUrl(host, port, apiKey, slug, "send", { cmd: "@pause" }))).data;
+  }
+
+  protected async rawResumeJob(host: string, port: string, apiKey: string) {
+    const { slug } = await this.selectPrinter(host, port, apiKey);
+    return (await this.apiClient.get(this.printerUrl(host, port, apiKey, slug, "continueJob"))).data;
+  }
+
   async getStatus(host: string, port: string, apiKey: string) {
     const url = `http://${host}:${port}/printer/api/?a=getPrinterInfo&apikey=${apiKey}`;
     const response = await this.apiClient.get(url);

package/src/slicer/bambu-cli.ts

@@ -49,6 +49,8 @@ export interface BambuSliceOptions {
   minSave?: boolean;           // --min-save
   skipModifiedGcodes?: boolean;// --skip-modified-gcodes
   slicePlate?: number;         // --slice N (0 = all plates)
+  /** Process keys written over the resolved process preset (layer_height, wall_loops, sparse_infill_density). */
+  processOverrides?: Record<string, string>;
 }
 
 export interface BambuSettingsBundle {
@@ -527,6 +529,17 @@ export class BambuCliProfilePreparer {
         this.writeTempJson(outputBase, "process_orca_resolved", this.sanitizeProcessForOrca(this.readJsonFile(processPath), printerPreset)),
       ].join(";");
     }
+    // Print-sheet quality/strength choices win over the preset and any template.
+    if (options.processOverrides && Object.keys(options.processOverrides).length && bundle.settingsArg) {
+      const [machinePath, processPath, ...rest] = bundle.settingsArg.split(";");
+      if (processPath) {
+        bundle.settingsArg = [
+          machinePath,
+          this.writeTempJson(outputBase, "process_overrides", { ...this.readJsonFile(processPath), ...options.processOverrides }),
+          ...rest,
+        ].join(";");
+      }
+    }
     return this.isolateMachineSettings(bundle);
   }