mclimate-payload-helper 1.2.13 → 1.2.15

package/dist/encoders/types/schemas.js

@@ -192,88 +192,141 @@ exports.Co2PirLiteEnums = {
 const GeneralCommandSchemas = {
     customHexCommand: zod_1.z.object({
         command: zod_1.z.string().regex(/^[0-9A-Fa-f]+$/, 'Must be a valid hex string'),
+        commandNumber: zod_1.z.string().optional(),
     }),
     setKeepAlive: zod_1.z.object({
         time: zod_1.z.number().int().min(1).max(255),
+        commandNumber: zod_1.z.string().optional().default('02'),
+    }),
+    getKeepAlive: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('12'),
     }),
-    getKeepAlive: zod_1.z.object({}),
     setJoinRetryPeriod: zod_1.z.object({
         period: zod_1.z.number().int().min(1).max(21),
+        commandNumber: zod_1.z.string().optional().default('10'),
+    }),
+    getJoinRetryPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('19'),
     }),
-    getJoinRetryPeriod: zod_1.z.object({}),
     setUplinkType: zod_1.z.object({
         type: zod_1.z.enum(['01', '00']),
+        commandNumber: zod_1.z.string().optional().default('11'),
+    }),
+    getUplinkType: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1b'),
     }),
-    getUplinkType: zod_1.z.object({}),
     setWatchDogParams: zod_1.z.object({
         confirmedUplinks: zod_1.z.number().int().min(0).max(255),
         unconfirmedUplinks: zod_1.z.number().int().min(0).max(255),
+        commandNumber: zod_1.z.string().optional().default('1c'),
+    }),
+    getWatchDogParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1d'),
+    }),
+    getRegion: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('a4'),
     }),
-    getWatchDogParams: zod_1.z.object({}),
 };
 /* ---------------------------------------CHILD LOCK COMMANDS--------------------------------------- */
 const ChildLockCommandSchemas = {
     setChildLock: zod_1.z.object({
         enabled: zod_1.z.boolean(),
+        commandNumber: zod_1.z.string().optional().default('07'),
+    }),
+    getChildLock: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('14'),
     }),
-    getChildLock: zod_1.z.object({}),
 };
 /* ---------------------------------------TEMPERATURE COMMANDS--------------------------------------- */
 const TemperatureCommandSchemas = {
     setTemperatureRange: zod_1.z.object({
         min: zod_1.z.number().min(5).max(30),
         max: zod_1.z.number().min(5).max(30),
+        commandNumber: zod_1.z.string().optional().default('08'),
+    }),
+    getTargetTemperature: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2f'),
     }),
-    getTargetTemperature: zod_1.z.object({}),
 };
 /* ---------------------------------------PIR COMMANDS--------------------------------------- */
 const PIRCommandSchemas = {
     setPIRSensorStatus: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: disabled, 1: enabled
+        commandNumber: zod_1.z.string().optional().default('3c'),
+    }),
+    getPIRSensorStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3d'),
     }),
-    getPIRSensorStatus: zod_1.z.object({}),
     setPIRSensorSensitivity: zod_1.z.object({
         sensitivity: zod_1.z.number().min(12).max(255),
+        commandNumber: zod_1.z.string().optional().default('3e'),
+    }),
+    getPIRSensorSensitivity: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3f'),
     }),
-    getPIRSensorSensitivity: zod_1.z.object({}),
     setPIRInitPeriod: zod_1.z.object({
         time: zod_1.z.number().min(0).max(255),
+        commandNumber: zod_1.z.string().optional().default('46'),
     }),
     setPIRMeasurementPeriod: zod_1.z.object({
         time: zod_1.z.number().min(3).max(255),
+        commandNumber: zod_1.z.string().optional().default('48'),
     }),
     setPIRCheckPeriod: zod_1.z.object({
         time: zod_1.z.number().min(0).max(65535),
+        commandNumber: zod_1.z.string().optional().default('4a'),
     }),
     setPIRBlindPeriod: zod_1.z.object({
         time: zod_1.z.number().min(15).max(65535),
+        commandNumber: zod_1.z.string().optional().default('4c'),
+    }),
+    getPIRInitPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('47'),
+    }),
+    getPIRMeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('49'),
+    }),
+    getPIRCheckPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4b'),
+    }),
+    getPIRBlindPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4d'),
     }),
-    getPIRInitPeriod: zod_1.z.object({}),
-    getPIRMeasurementPeriod: zod_1.z.object({}),
-    getPIRCheckPeriod: zod_1.z.object({}),
-    getPIRBlindPeriod: zod_1.z.object({}),
 };
 /* ---------------------------------------DISPLAY COMMANDS--------------------------------------- */
 const DisplayCommandSchemas = {
     setDisplayRefreshPeriod: zod_1.z.object({
         period: zod_1.z.number().min(1).max(24),
+        commandNumber: zod_1.z.string().optional().default('33'),
+    }),
+    getDisplayRefreshPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('34'),
     }),
-    getDisplayRefreshPeriod: zod_1.z.object({}),
     setDeepSleepMode: zod_1.z.object({
         state: zod_1.z.number().min(1).max(1),
+        commandNumber: zod_1.z.string().optional().default('3b'),
     }),
     setHumidityVisibility: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: hide, 1: show
+        commandNumber: zod_1.z.string().optional().default('42'),
+    }),
+    getHumidityVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('43'),
     }),
-    getHumidityVisibility: zod_1.z.object({}),
     setLightIntensityVisibility: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: hide, 1: show
+        commandNumber: zod_1.z.string().optional().default('44'),
+    }),
+    getLightIntensityVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('45'),
     }),
-    getLightIntensityVisibility: zod_1.z.object({}),
     setCurrentTemperatureVisibility: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: hide, 1: show
+        commandNumber: zod_1.z.string().optional().default('40'),
+    }),
+    getCurrentTemperatureVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('41'),
     }),
-    getCurrentTemperatureVisibility: zod_1.z.object({}),
 };
 /* ---------------------------------------VICKI COMMANDS--------------------------------------- */
 const VickiCommandSchemas = Object.assign(Object.assign(Object.assign(Object.assign({}, GeneralCommandSchemas), TemperatureCommandSchemas), ChildLockCommandSchemas), { setOpenWindow: zod_1.z.object({
@@ -281,73 +334,148 @@ const VickiCommandSchemas = Object.assign(Object.assign(Object.assign(Object.ass
         delta: zod_1.z.number().min(0).max(15),
         closeTime: zod_1.z.number().min(0).max(51),
         motorPosition: zod_1.z.number().int().min(0).max(800),
-    }), getOpenWindowParams: zod_1.z.object({}), recalibrateMotor: zod_1.z.object({}), forceClose: zod_1.z.object({}), setInternalAlgoParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('06'),
+    }), getOpenWindowParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('13'),
+    }), recalibrateMotor: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('03'),
+    }), forceClose: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0b'),
+    }), setInternalAlgoParams: zod_1.z.object({
         period: zod_1.z.number().int().min(0).max(255),
         pFirstLast: zod_1.z.number().int().min(0).max(255),
         pNext: zod_1.z.number().int().min(0).max(255),
-    }), getInternalAlgoParams: zod_1.z.object({}), setOperationalMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0c'),
+    }), getInternalAlgoParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('16'),
+    }), setOperationalMode: zod_1.z.object({
         mode: zod_1.z.enum(['00', '01', '02']),
-    }), getOperationalMode: zod_1.z.object({}), setTargetTemperature: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0d'),
+    }), getOperationalMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('18'),
+    }), setTargetTemperature: zod_1.z.object({
         targetTemperature: zod_1.z.number().min(5).max(30),
+        commandNumber: zod_1.z.string().optional().default('0e'),
     }), setExternalTemperature: zod_1.z.object({
         temp: zod_1.z.number().int().min(0).max(255),
-    }), getExternalTemperature: zod_1.z.object({}), setInternalAlgoTdiffParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0f'),
+    }), getExternalTemperature: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('44'),
+    }), setInternalAlgoTdiffParams: zod_1.z.object({
         cold: zod_1.z.number().int().min(0).max(255),
         warm: zod_1.z.number().int().min(0).max(255),
-    }), getInternalAlgoTdiffParams: zod_1.z.object({}), setPrimaryOperationalMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1a'),
+    }), getInternalAlgoTdiffParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('17'),
+    }), setPrimaryOperationalMode: zod_1.z.object({
         mode: zod_1.z.enum(['00', '01']),
-    }), getPrimaryOperationalMode: zod_1.z.object({}), setBatteryRangesBoundaries: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getPrimaryOperationalMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setBatteryRangesBoundaries: zod_1.z.object({
         Boundary1: zod_1.z.number().int().min(0).max(65535),
         Boundary2: zod_1.z.number().int().min(0).max(65535),
         Boundary3: zod_1.z.number().int().min(0).max(65535),
+        commandNumber: zod_1.z.string().optional().default('20'),
     }), setBatteryRangesOverVoltage: zod_1.z.object({
         Range1: zod_1.z.number().int().min(0).max(255),
         Range2: zod_1.z.number().int().min(0).max(255),
         Range3: zod_1.z.number().int().min(0).max(255),
+        commandNumber: zod_1.z.string().optional().default('22'),
     }), setOvac: zod_1.z.object({
         ovac: zod_1.z.number().int().min(0).max(255),
-    }), getOvac: zod_1.z.object({}), setProportionalAlgorithmParameters: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('26'),
+    }), getOvac: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('27'),
+    }), setProportionalAlgorithmParameters: zod_1.z.object({
         coefficient: zod_1.z.number().min(0).max(20),
         period: zod_1.z.number().int().min(0).max(255),
-    }), getProportionalAlgorithmParameters: zod_1.z.object({}), setTemperatureControlAlgorithm: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2a'),
+    }), getProportionalAlgorithmParameters: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('29'),
+    }), setTemperatureControlAlgorithm: zod_1.z.object({
         algorithm: zod_1.z.enum(['00', '01', '02']),
-    }), getTemperatureControlAlgorithm: zod_1.z.object({}), setMotorPositionOnly: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2c'),
+    }), getTemperatureControlAlgorithm: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2b'),
+    }), setMotorPositionOnly: zod_1.z.object({
         position: zod_1.z.number().int().min(0).max(800),
-    }), deviceReset: zod_1.z.object({}), setTargetTemperatureAndMotorPosition: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2d'),
+    }), deviceReset: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('30'),
+    }), setTargetTemperatureAndMotorPosition: zod_1.z.object({
         motorPosition: zod_1.z.number().int().min(0).max(800),
         targetTemperature: zod_1.z.number().min(5).max(30),
+        commandNumber: zod_1.z.string().optional().default('31'),
     }), setChildLockBehavior: zod_1.z.object({
         behavior: zod_1.z.number().min(0).max(1),
-    }), getChildLockBehavior: zod_1.z.object({}), setProportionalGain: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('35'),
+    }), getChildLockBehavior: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('34'),
+    }), setProportionalGain: zod_1.z.object({
         proportionalGain: zod_1.z.number().int().min(0).max(127),
-    }), getProportionalGain: zod_1.z.object({}), setExternalTemperatureFloat: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('37'),
+    }), getProportionalGain: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('36'),
+    }), setExternalTemperatureFloat: zod_1.z.object({
         temp: zod_1.z.number().min(0.1).max(255.0).multipleOf(0.1),
+        commandNumber: zod_1.z.string().optional().default('3c'),
     }), setIntegralGain: zod_1.z.object({
         integralGain: zod_1.z.number().int().min(0).max(127),
-    }), getIntegralGain: zod_1.z.object({}), getIntegralValue: zod_1.z.object({}), setPiRunPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3e'),
+    }), getIntegralGain: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3d'),
+    }), getIntegralValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3f'),
+    }), setPiRunPeriod: zod_1.z.object({
         period: zod_1.z.number().int().min(0).max(255),
-    }), getPiRunPeriod: zod_1.z.object({}), setTemperatureHysteresis: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('41'),
+    }), getPiRunPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('40'),
+    }), setTemperatureHysteresis: zod_1.z.object({
         hysteresis: zod_1.z.number().min(0.1).max(10.0).multipleOf(0.1),
-    }), getTemperatureHysteresis: zod_1.z.object({}), setOpenWindowPrecisely: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('43'),
+    }), getTemperatureHysteresis: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('42'),
+    }), setOpenWindowPrecisely: zod_1.z.object({
         enabled: zod_1.z.boolean(),
         duration: zod_1.z.number().min(0).max(51),
         delta: zod_1.z.number().min(0.1).max(15.0).multipleOf(0.1),
-    }), getOpenWindowPrecisely: zod_1.z.object({}), setForceAttach: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('45'),
+    }), getOpenWindowPrecisely: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('46'),
+    }), setForceAttach: zod_1.z.object({
         enabled: zod_1.z.boolean(),
-    }), getForceAttach: zod_1.z.object({}), setAntiFreezeParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('47'),
+    }), getForceAttach: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('48'),
+    }), setAntiFreezeParams: zod_1.z.object({
         activatedTemperature: zod_1.z.number().min(0).max(25),
         deactivatedTemperature: zod_1.z.number().min(0).max(25),
         targetTemperature: zod_1.z.number().min(0).max(30),
-    }), getAntiFreezeParams: zod_1.z.object({}), setMaxAllowedIntegralValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('49'),
+    }), getAntiFreezeParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4a'),
+    }), setMaxAllowedIntegralValue: zod_1.z.object({
         value: zod_1.z.number().int().min(0).max(255),
-    }), getMaxAllowedIntegralValue: zod_1.z.object({}), setValveOpennessInPercentage: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4c'),
+    }), getMaxAllowedIntegralValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4d'),
+    }), setValveOpennessInPercentage: zod_1.z.object({
         value: zod_1.z.number().min(0).max(100),
+        commandNumber: zod_1.z.string().optional().default('4e'),
     }), setValveOpennessRangeInPercentage: zod_1.z.object({
         min: zod_1.z.number().min(0).max(100),
         max: zod_1.z.number().min(0).max(100),
-    }), getValveOpennessRangeInPercentage: zod_1.z.object({}), setTemperatureOffset: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4f'),
+    }), getValveOpennessRangeInPercentage: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('50'),
+    }), setTemperatureOffset: zod_1.z.object({
         value: zod_1.z.number().min(-5).max(5),
-    }), getTemperatureOffset: zod_1.z.object({}), setHeatingEvent: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('53'),
+    }), getTemperatureOffset: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('54'),
+    }), setHeatingEvent: zod_1.z.object({
         eventIndex: zod_1.z.number().int().min(0).max(19),
         startHour: zod_1.z.number().int().min(0).max(23),
         startMinute: zod_1.z.number().int().min(0).max(59),
@@ -361,29 +489,38 @@ const VickiCommandSchemas = Object.assign(Object.assign(Object.assign(Object.ass
             saturday: zod_1.z.boolean(),
             sunday: zod_1.z.boolean(),
         }),
+        commandNumber: zod_1.z.string().optional().default('59'),
     }), setHeatingEventState: zod_1.z.object({
         eventIndex: zod_1.z.number().int().min(0).max(19),
         active: zod_1.z.boolean(),
+        commandNumber: zod_1.z.string().optional().default('6b'),
     }), setTimeRequestByMACcommand: zod_1.z.object({
         enabled: zod_1.z.boolean(),
+        commandNumber: zod_1.z.string().optional().default('6d'),
     }), setHeatingSchedule: zod_1.z.object({
         startMonth: zod_1.z.number().int().min(0).max(11),
         startDay: zod_1.z.number().int().min(0).max(31), // 0 disables schedule handling
         endMonth: zod_1.z.number().int().min(0).max(11),
         endDay: zod_1.z.number().int().min(0).max(31), // 0 disables schedule handling
+        commandNumber: zod_1.z.string().optional().default('5b'),
     }), setDeviceTime: zod_1.z.object({
         timestamp: zod_1.z.number().int().min(0).max(4294967295), // Unsigned 32-bit integer max value
+        commandNumber: zod_1.z.string().optional().default('5d'),
     }), setDeviceTimeZone: zod_1.z.object({
         offsetHours: zod_1.z.number().int().min(-12).max(12), // Time zone offset in hours, range [-12:12]
+        commandNumber: zod_1.z.string().optional().default('5f'),
     }), setAutomaticSetpointRestore: zod_1.z.object({
         time: zod_1.z.number().int().min(0).max(255), // Time in 10-minute increments (0-2550 minutes), 0 disables the functionality
+        commandNumber: zod_1.z.string().optional().default('61'),
     }), setOfflineTargetTemperature: zod_1.z.object({
         targetTemperature: zod_1.z.union([
             zod_1.z.literal(0), // To disable the feature
             zod_1.z.number().min(5).max(30).multipleOf(0.1), // Temperature range 5.0-30.0°C with 0.1°C increments
         ]),
+        commandNumber: zod_1.z.string().optional().default('65'),
     }), setInternalAlgoTemporaryState: zod_1.z.object({
         enabled: zod_1.z.boolean(), // true = enable algorithm (00), false = disable algorithm temporarily (01)
+        commandNumber: zod_1.z.string().optional().default('67'),
     }), setTemperatureLevels: zod_1.z.object({
         scaleLevel0: zod_1.z.number().min(5).max(30).multipleOf(0.1),
         scaleLevel1: zod_1.z.number().min(5).max(30).multipleOf(0.1),
@@ -391,217 +528,475 @@ const VickiCommandSchemas = Object.assign(Object.assign(Object.assign(Object.ass
         scaleLevel3: zod_1.z.number().min(5).max(30).multipleOf(0.1),
         scaleLevel4: zod_1.z.number().min(5).max(30).multipleOf(0.1),
         scaleLevel5: zod_1.z.number().min(5).max(30).multipleOf(0.1),
+        commandNumber: zod_1.z.string().optional().default('69'),
     }), setLedIndicationDuration: zod_1.z.object({
         duration: zod_1.z.number().min(0.5).max(20).multipleOf(0.5), // Duration in range [0.5:20] with 0.5s resolution
+        commandNumber: zod_1.z.string().optional().default('63'),
     }) });
 /* --------------------------------------- RELAY 16 COMMANDS --------------------------------------- */
 const Relay16CommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setOverheatingThresholds: zod_1.z.object({
         trigger: zod_1.z.number().min(30).max(100),
         recovery: zod_1.z.number().min(30).max(100),
-    }), getOverheatingThresholds: zod_1.z.object({}), setOvervoltageThresholds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getOverheatingThresholds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setOvervoltageThresholds: zod_1.z.object({
         trigger: zod_1.z.number().min(1).max(255),
         recovery: zod_1.z.number().min(1).max(255),
-    }), getOvervoltageThresholds: zod_1.z.object({}), setOvercurrentThreshold: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('20'),
+    }), getOvervoltageThresholds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('21'),
+    }), setOvercurrentThreshold: zod_1.z.object({
         current: zod_1.z.number().min(1).max(16),
-    }), getOvercurrentThreshold: zod_1.z.object({}), setOverpowerThreshold: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('22'),
+    }), getOvercurrentThreshold: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('23'),
+    }), setOverpowerThreshold: zod_1.z.object({
         power: zod_1.z.number().min(100).max(3680),
-    }), getOverpowerThreshold: zod_1.z.object({}), clearAcumulatedEnergy: zod_1.z.object({}), setAfterOverheatingProtectionRecovery: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('24'),
+    }), getOverpowerThreshold: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('25'),
+    }), clearAcumulatedEnergy: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional(),
+    }), setAfterOverheatingProtectionRecovery: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: lastState, 1: OFF
-    }), getAfterOverheatingProtectionRecovery: zod_1.z.object({}), setLedIndicationMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('59'),
+    }), getAfterOverheatingProtectionRecovery: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5a'),
+    }), setLedIndicationMode: zod_1.z.object({
         mode: zod_1.z.number().min(0).max(1), // 0: OFF, 1: ON
-    }), getLedIndicationMode: zod_1.z.object({}), setRelayRecoveryState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5b'),
+    }), getLedIndicationMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5c'),
+    }), setRelayRecoveryState: zod_1.z.object({
         state: zod_1.z.number().min(0).max(2), // 0: lastState, 1: ON, 2: OFF
-    }), getRelayRecoveryState: zod_1.z.object({}), setRelayState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5e'),
+    }), getRelayRecoveryState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5f'),
+    }), setRelayState: zod_1.z.object({
         state: zod_1.z.boolean(), // 0: OFF, 1: ON
-    }), getRelayState: zod_1.z.object({}), setRelayTimerInMilliseconds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('c1'),
+    }), getRelayState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('b1'),
+    }), setRelayTimerInMilliseconds: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: OFF, 1: ON
         time: zod_1.z.number().min(0).max(65535),
-    }), getRelayTimerInMilliseconds: zod_1.z.object({}), setRelayTimerInSeconds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('55'),
+    }), getRelayTimerInMilliseconds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('56'),
+    }), setRelayTimerInSeconds: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: OFF, 1: ON
         time: zod_1.z.number().min(0).max(65535),
-    }), getRelayTimerInSeconds: zod_1.z.object({}), getRelayStateChangeReason: zod_1.z.object({}), getOverheatingEvents: zod_1.z.object({}), getOvervoltageEvents: zod_1.z.object({}), getOvercurrentEvents: zod_1.z.object({}), getOverpowerEvents: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('57'),
+    }), getRelayTimerInSeconds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('58'),
+    }), getRelayStateChangeReason: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('54'),
+    }), getOverheatingEvents: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('60'),
+    }), getOvervoltageEvents: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('61'),
+    }), getOvercurrentEvents: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('62'),
+    }), getOverpowerEvents: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('63'),
+    }) });
 /* --------------------------------------- RELAY 16 DRY COMMANDS --------------------------------------- */
 const Relay16DryCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setOverheatingThresholds: zod_1.z.object({
         trigger: zod_1.z.number().min(30).max(100),
         recovery: zod_1.z.number().min(30).max(100),
-    }), getOverheatingThresholds: zod_1.z.object({}), setAfterOverheatingProtectionRecovery: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getOverheatingThresholds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setAfterOverheatingProtectionRecovery: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: lastState, 1: OFF
+        commandNumber: zod_1.z.string().optional().default('59'),
     }), setRelayTimerInMilliseconds: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: OFF, 1: ON
         time: zod_1.z.number().min(0).max(65535),
-    }), getRelayTimerInMilliseconds: zod_1.z.object({}), setRelayTimerInSeconds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('55'),
+    }), getRelayTimerInMilliseconds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('56'),
+    }), setRelayTimerInSeconds: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: OFF, 1: ON
         time: zod_1.z.number().min(0).max(65535),
-    }), getRelayTimerInSeconds: zod_1.z.object({}), getRelayStateChangeReason: zod_1.z.object({}), getAfterOverheatingProtectionRecovery: zod_1.z.object({}), setLedIndicationMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('57'),
+    }), getRelayTimerInSeconds: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('58'),
+    }), getRelayStateChangeReason: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('54'),
+    }), getAfterOverheatingProtectionRecovery: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5a'),
+    }), setLedIndicationMode: zod_1.z.object({
         mode: zod_1.z.number().min(0).max(1), // 0: OFF, 1: ON
-    }), getLedIndicationMode: zod_1.z.object({}), setRelayRecoveryState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5b'),
+    }), getLedIndicationMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5c'),
+    }), setRelayRecoveryState: zod_1.z.object({
         state: zod_1.z.number().min(0).max(2), // 0: lastState, 1: ON, 2: OFF
-    }), getRelayRecoveryState: zod_1.z.object({}), setRelayState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5e'),
+    }), getRelayRecoveryState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5f'),
+    }), setRelayState: zod_1.z.object({
         state: zod_1.z.boolean(), // 0: OFF, 1: ON
-    }), getRelayState: zod_1.z.object({}), getOverheatingEvents: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('c1'),
+    }), getRelayState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('b1'),
+    }), getOverheatingEvents: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('60'),
+    }) });
 // ------------------------------------------------ T-VALVE COMMANDS ------------------------------------------------
 const TValveCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setOpenCloseTime: zod_1.z.object({
         openingTime: zod_1.z.number().min(1).max(255),
         closingTime: zod_1.z.number().min(1).max(255),
-    }), getOpenCloseTime: zod_1.z.object({}), setLED: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('01'),
+    }), getOpenCloseTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional(),
+    }), setLED: zod_1.z.object({
         ledId: zod_1.z.number().min(1).max(4),
         behavior: zod_1.z.number().min(0).max(4),
         seconds: zod_1.z.number().min(1).max(255),
+        commandNumber: zod_1.z.string().optional().default('02'),
     }), setBuzzer: zod_1.z.object({
         volume: zod_1.z.number().min(1).max(255),
         frequency: zod_1.z.number().min(1).max(255),
         activeTime: zod_1.z.number().min(1).max(255),
         onTime: zod_1.z.number().min(1).max(255),
         offTime: zod_1.z.number().min(1).max(255),
+        commandNumber: zod_1.z.string().optional().default('03'),
     }), setEmergencyOpenings: zod_1.z.object({
         maxOpenings: zod_1.z.number().min(1).max(15),
-    }), getEmergencyOpenings: zod_1.z.object({}), setManualControl: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('04'),
+    }), getEmergencyOpenings: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0f'),
+    }), setManualControl: zod_1.z.object({
         enableOpen: zod_1.z.boolean(),
         enableClose: zod_1.z.boolean(),
+        commandNumber: zod_1.z.string().optional().default('05'),
     }), setFloodAlarmTime: zod_1.z.object({
         time: zod_1.z.number().min(1).max(255),
-    }), getFloodAlarmTime: zod_1.z.object({}), setKeepAliveTValve: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('06'),
+    }), getFloodAlarmTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('10'),
+    }), setKeepAliveTValve: zod_1.z.object({
         time: zod_1.z.number().min(1).max(255),
+        commandNumber: zod_1.z.string().optional().default('02'),
     }), setWorkingVoltage: zod_1.z.object({
         voltage: zod_1.z.number().min(1840).max(2500),
-    }), getWorkingVoltage: zod_1.z.object({}), setValveState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('09'),
+    }), getWorkingVoltage: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('11'),
+    }), setValveState: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: open, 1: close
+        commandNumber: zod_1.z.string().optional().default('0c'),
     }), setOpenCloseTimeExtended: zod_1.z.object({
         openingTime: zod_1.z.number().min(1).max(65535),
         closingTime: zod_1.z.number().min(1).max(65535),
-    }), getOpenCloseTimeExtended: zod_1.z.object({}), setSingleTimeValveState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0d'),
+    }), getOpenCloseTimeExtended: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0e'),
+    }), setSingleTimeValveState: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: open, 1: close
         time: zod_1.z.number().min(1).max(65535),
+        commandNumber: zod_1.z.string().optional().default('14'),
     }), setDeviceFloodSensor: zod_1.z.object({
         enabled: zod_1.z.boolean(),
-    }), getDeviceFloodSensor: zod_1.z.object({}), setJoinRetryPeriodTValve: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0a'),
+    }), getDeviceFloodSensor: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('13'),
+    }), setJoinRetryPeriodTValve: zod_1.z.object({
         period: zod_1.z.number().min(1).max(21),
+        commandNumber: zod_1.z.string().optional().default('10'),
     }), setUplinkTypeTValve: zod_1.z.object({
         type: zod_1.z.enum(['01', '00']), // 01: confirmedUplinks, 00: unconfirmedUplinks
+        commandNumber: zod_1.z.string().optional().default('11'),
     }), setWatchDogTValveParams: zod_1.z.object({
         confirmedUplinks: zod_1.z.number().min(0).max(255),
         unconfirmedUplinks: zod_1.z.number().min(0).max(255),
-    }), getWatchDogTValveParams: zod_1.z.object({}), requestFullData: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('1c'),
+    }), getWatchDogTValveParams: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional(),
+    }), requestFullData: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('08'),
+    }) });
 /* --------------------------------------- FAN COIL THERMOSTAT COMMANDS --------------------------------------- */
 const FanCoilThermostatCommandSchemas = Object.assign(Object.assign(Object.assign({}, GeneralCommandSchemas), TemperatureCommandSchemas), { setDisplayRefreshPeriod: zod_1.z.object({
         period: zod_1.z.number().min(1).max(24),
-    }), getDisplayRefreshPeriod: zod_1.z.object({}), setHumidityVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('33'),
+    }), getDisplayRefreshPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('34'),
+    }), setHumidityVisibility: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: hide, 1: show
-    }), getHumidityVisibility: zod_1.z.object({}), setCurrentTemperatureVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('42'),
+    }), getHumidityVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('43'),
+    }), setCurrentTemperatureVisibility: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: hide, 1: show
-    }), getCurrentTemperatureVisibility: zod_1.z.object({}), setTargetTemperatureStep: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('40'),
+    }), getCurrentTemperatureVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('41'),
+    }), setTargetTemperatureStep: zod_1.z.object({
         value: zod_1.z.number().min(0.1).max(10).multipleOf(0.1),
-    }), getTargetTemperatureStep: zod_1.z.object({}), setKeysLock: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('03'),
+    }), getTargetTemperatureStep: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('05'),
+    }), setKeysLock: zod_1.z.object({
         value: zod_1.z.number().min(0).max(5),
-    }), getKeysLock: zod_1.z.object({}), setTargetTemperature: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('07'),
+    }), getKeysLock: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('14'),
+    }), setTargetTemperature: zod_1.z.object({
         targetTemperature: zod_1.z.number().min(5).max(99),
+        commandNumber: zod_1.z.string().optional().default('0e'),
     }), setValveOpenCloseTime: zod_1.z.object({
         value: zod_1.z.number().min(1).max(255),
-    }), getValveOpenCloseTime: zod_1.z.object({}), setExtAutomaticTemperatureControl: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('31'),
+    }), getValveOpenCloseTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('32'),
+    }), setExtAutomaticTemperatureControl: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1), // 0: deactivated, 1: activated
-    }), getExtAutomaticTemperatureControl: zod_1.z.object({}), setFanSpeed: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('35'),
+    }), getExtAutomaticTemperatureControl: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('36'),
+    }), setFanSpeed: zod_1.z.object({
         value: zod_1.z.number().min(0).max(6),
-    }), getFanSpeed: zod_1.z.object({}), setFanSpeedLimit: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('44'),
+    }), getFanSpeed: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('45'),
+    }), setFanSpeedLimit: zod_1.z.object({
         value: zod_1.z.number().min(0).max(3),
-    }), getFanSpeedLimit: zod_1.z.object({}), setEcmVoltageRange: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('46'),
+    }), getFanSpeedLimit: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('47'),
+    }), setEcmVoltageRange: zod_1.z.object({
         min: zod_1.z.number().min(0).max(10),
         max: zod_1.z.number().min(0).max(10),
-    }), getEcmVoltageRange: zod_1.z.object({}), setEcmStartUpTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('48'),
+    }), getEcmVoltageRange: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('49'),
+    }), setEcmStartUpTime: zod_1.z.object({
         value: zod_1.z.number().min(0).max(20),
-    }), getEcmStartUpTime: zod_1.z.object({}), setEcmRelay: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4a'),
+    }), getEcmStartUpTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4b'),
+    }), setEcmRelay: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1), // 0: deactivated, 1: activated
-    }), getEcmRelay: zod_1.z.object({}), setFrostProtection: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4c'),
+    }), getEcmRelay: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4d'),
+    }), setFrostProtection: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1), // 0: OFF, 1: ON
-    }), getFrostProtection: zod_1.z.object({}), setFrostProtectionSettings: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4e'),
+    }), getFrostProtection: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('4f'),
+    }), setFrostProtectionSettings: zod_1.z.object({
         threshold: zod_1.z.number().min(4).max(20),
         setpoint: zod_1.z.number().min(4).max(20),
-    }), getFrostProtectionSettings: zod_1.z.object({}), setFctOperationalMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('50'),
+    }), getFrostProtectionSettings: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('51'),
+    }), setFctOperationalMode: zod_1.z.object({
         value: zod_1.z.number().min(0).max(2), // 0: ventilation, 1: heating, 2: cooling
+        commandNumber: zod_1.z.string().optional().default('52'),
     }), setAllowedOperationalModes: zod_1.z.object({
         value: zod_1.z.number().min(0).max(2),
-    }), getAllowedOperationalModes: zod_1.z.object({}), setCoolingSetpointNotOccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('54'),
+    }), getAllowedOperationalModes: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('55'),
+    }), setCoolingSetpointNotOccupied: zod_1.z.object({
         value: zod_1.z.number().min(5).max(30),
-    }), getCoolingSetpointNotOccupied: zod_1.z.object({}), setHeatingSetpointNotOccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('56'),
+    }), getCoolingSetpointNotOccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('57'),
+    }), setHeatingSetpointNotOccupied: zod_1.z.object({
         value: zod_1.z.number().min(5).max(30),
-    }), getHeatingSetpointNotOccupied: zod_1.z.object({}), setTempSensorCompensation: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('58'),
+    }), getHeatingSetpointNotOccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('59'),
+    }), setTempSensorCompensation: zod_1.z.object({
         compensation: zod_1.z.number().min(0).max(1),
         temperature: zod_1.z.number().min(-5).max(5).multipleOf(0.1),
-    }), getTempSensorCompensation: zod_1.z.object({}), setFanSpeedNotOccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5a'),
+    }), getTempSensorCompensation: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5b'),
+    }), setFanSpeedNotOccupied: zod_1.z.object({
         value: zod_1.z.number().min(0).max(2), // 0: low, 1: automatic, 2: dontChange
-    }), getFanSpeedNotOccupied: zod_1.z.object({}), setAutomaticChangeover: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5c'),
+    }), getFanSpeedNotOccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5d'),
+    }), setAutomaticChangeover: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1), // 0: deactivated, 1: activated
-    }), getAutomaticChangeover: zod_1.z.object({}), setWiringDiagram: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5e'),
+    }), getAutomaticChangeover: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('5f'),
+    }), setWiringDiagram: zod_1.z.object({
         value: zod_1.z.number().min(0).max(6),
-    }), getWiringDiagram: zod_1.z.object({}), setOccFunction: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('60'),
+    }), getWiringDiagram: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('61'),
+    }), setOccFunction: zod_1.z.object({
         value: zod_1.z.number().min(0).max(7),
-    }), getOccFunction: zod_1.z.object({}), setAutomaticChangeoverThreshold: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('62'),
+    }), getOccFunction: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('63'),
+    }), setAutomaticChangeoverThreshold: zod_1.z.object({
         coolingThreshold: zod_1.z.number().min(5).max(20),
         heatingThreshold: zod_1.z.number().min(30).max(60),
-    }), getAutomaticChangeoverThreshold: zod_1.z.object({}), setDeviceStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('64'),
+    }), getAutomaticChangeoverThreshold: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('65'),
+    }), setDeviceStatus: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1), // 0: off, 1: on
-    }), getDeviceStatus: zod_1.z.object({}), setReturnOfPowerOperation: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('66'),
+    }), getDeviceStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('67'),
+    }), setReturnOfPowerOperation: zod_1.z.object({
         value: zod_1.z.number().min(0).max(2), // 0: lastStatus, 1: on, 2: off
-    }), getReturnOfPowerOperation: zod_1.z.object({}), setDeltaTemperature1: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('68'),
+    }), getReturnOfPowerOperation: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('69'),
+    }), setDeltaTemperature1: zod_1.z.object({
         value: zod_1.z.number().min(0.5).max(10).multipleOf(0.5),
-    }), getDeltaTemperature1: zod_1.z.object({}), setDeltaTemperature2and3: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('6a'),
+    }), getDeltaTemperature1: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('6b'),
+    }), setDeltaTemperature2and3: zod_1.z.object({
         deltaTemperature2: zod_1.z.number().min(0.5).max(10).multipleOf(0.5),
         deltaTemperature3: zod_1.z.number().min(0.5).max(10).multipleOf(0.5),
-    }), getDeltaTemperature2and3: zod_1.z.object({}), getFrostProtectionStatus: zod_1.z.object({}), getOccupancySensorStatusSetPoint: zod_1.z.object({}), getOccupancySensorStatus: zod_1.z.object({}), getDewPointSensorStatus: zod_1.z.object({}), getFilterAlarm: zod_1.z.object({}), setHeatingCoolingTargetTempRanges: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('6c'),
+    }), getDeltaTemperature2and3: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('6d'),
+    }), getFrostProtectionStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('6e'),
+    }), getOccupancySensorStatusSetPoint: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('70'),
+    }), getOccupancySensorStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('71'),
+    }), getDewPointSensorStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('72'),
+    }), getFilterAlarm: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('73'),
+    }), setHeatingCoolingTargetTempRanges: zod_1.z.object({
         heatingTempMin: zod_1.z.number().min(5).max(30),
         heatingTempMax: zod_1.z.number().min(5).max(30),
         coolingTempMin: zod_1.z.number().min(5).max(30),
         coolingTempMax: zod_1.z.number().min(5).max(30),
-    }), getHeatingCoolingTargetTempRanges: zod_1.z.object({}), setHeatingCoolingTargetTempRangesUnoccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('16'),
+    }), getHeatingCoolingTargetTempRanges: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('17'),
+    }), setHeatingCoolingTargetTempRangesUnoccupied: zod_1.z.object({
         heatingTempMin: zod_1.z.number().min(5).max(30),
         heatingTempMax: zod_1.z.number().min(5).max(30),
         coolingTempMin: zod_1.z.number().min(5).max(30),
         coolingTempMax: zod_1.z.number().min(5).max(30),
-    }), getHeatingCoolingTargetTempRangesUnoccupied: zod_1.z.object({}), setFanOffDelayTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('76'),
+    }), getHeatingCoolingTargetTempRangesUnoccupied: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('77'),
+    }), setFanOffDelayTime: zod_1.z.object({
         time: zod_1.z.number().min(0).max(255),
-    }), getFanOffDelayTime: zod_1.z.object({}), setAdditionalFanMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('78'),
+    }), getFanOffDelayTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('79'),
+    }), setAdditionalFanMode: zod_1.z.object({
         mode: zod_1.z.number().min(0).max(2), // 0: TurnOffOnTargetReach, 1: KeepOnTargetReach, 2: FanAlwaysOn
-    }), getAdditionalFanMode: zod_1.z.object({}), getInternalTemperatureSensorError: zod_1.z.object({}), getExternalTemperatureSensorError: zod_1.z.object({}), setUserInterfaceLanguage: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('7a'),
+    }), getAdditionalFanMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('7b'),
+    }), getInternalTemperatureSensorError: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('7c'),
+    }), getExternalTemperatureSensorError: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('7d'),
+    }), setUserInterfaceLanguage: zod_1.z.object({
         value: zod_1.z.number().min(0).max(3), // 0: English, 1: French, 2: German, 3: Spanish
-    }), getUserInterfaceLanguage: zod_1.z.object({}), restartDevice: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('9a'),
+    }), getUserInterfaceLanguage: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('9b'),
+    }), restartDevice: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('a5'),
+    }) });
 /* --------------------------------------- OPEN CLOSE SENSOR COMMANDS --------------------------------------- */
 const OpenCloseSensorCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setNotificationBlindTime: zod_1.z.object({
         time: zod_1.z.number().min(1).max(255),
-    }), getNotificationBlindTime: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getNotificationBlindTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }) });
 /* --------------------------------------- WIRELESS THERMOSTAT COMMANDS --------------------------------------- */
-const WirelessThermostatCommandSchemas = Object.assign(Object.assign(Object.assign(Object.assign(Object.assign(Object.assign(Object.assign({}, GeneralCommandSchemas), TemperatureCommandSchemas), { getTemperatureRange: zod_1.z.object({}) }), DisplayCommandSchemas), PIRCommandSchemas), ChildLockCommandSchemas), { setTargetTemperature: zod_1.z.object({
+const WirelessThermostatCommandSchemas = Object.assign(Object.assign(Object.assign(Object.assign(Object.assign(Object.assign(Object.assign({}, GeneralCommandSchemas), TemperatureCommandSchemas), { getTemperatureRange: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('15'),
+    }) }), DisplayCommandSchemas), PIRCommandSchemas), ChildLockCommandSchemas), { setTargetTemperature: zod_1.z.object({
         targetTemperature: zod_1.z.number().min(5).max(99),
-    }), getTargetTemperature: zod_1.z.object({}), setHeatingStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('0e'),
+    }), getTargetTemperature: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2f'),
+    }), setHeatingStatus: zod_1.z.object({
         status: zod_1.z.number().min(0).max(1), // 0: disabled, 1: enabled
-    }), getHeatingStatus: zod_1.z.object({}), setDisplayRefreshPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('31'),
+    }), getHeatingStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('32'),
+    }), setDisplayRefreshPeriod: zod_1.z.object({
         period: zod_1.z.number().min(1).max(24),
-    }), getDisplayRefreshPeriod: zod_1.z.object({}), setTargetSendDelay: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('33'),
+    }), getDisplayRefreshPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('34'),
+    }), setTargetSendDelay: zod_1.z.object({
         time: zod_1.z.number().min(0).max(255),
-    }), getTargetSendDelay: zod_1.z.object({}), setAutomaticHeatingStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('35'),
+    }), getTargetSendDelay: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('36'),
+    }), setAutomaticHeatingStatus: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: turnOffAutomaticMode, 1: turnOnAutomaticMode
-    }), getAutomaticHeatingStatus: zod_1.z.object({}), setSensorMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('37'),
+    }), getAutomaticHeatingStatus: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('38'),
+    }), setSensorMode: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: turnOffSensorMode, 1: turnOnSensorMode
-    }), getSensorMode: zod_1.z.object({}), setTemperatureHysteresis: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('39'),
+    }), getSensorMode: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3a'),
+    }), setTemperatureHysteresis: zod_1.z.object({
         hysteresis: zod_1.z.number().min(0.1).max(25.5).multipleOf(0.1),
-    }), getTemperatureHysteresis: zod_1.z.object({}), setTargetTemperaturePrecisely: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('43'),
+    }), getTemperatureHysteresis: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('42'),
+    }), setTargetTemperaturePrecisely: zod_1.z.object({
         targetTemperature: zod_1.z.number().min(5).max(99).multipleOf(0.1),
-    }), getTargetTemperaturePrecisely: zod_1.z.object({}), setTargetTemperatureStep: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('50'),
+    }), getTargetTemperaturePrecisely: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('51'),
+    }), setTargetTemperatureStep: zod_1.z.object({
         value: zod_1.z.number().min(0.1).max(10).multipleOf(0.1),
-    }), getTargetTemperatureStep: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('03'),
+    }), getTargetTemperatureStep: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('05'),
+    }) });
 /* --------------------------------------- CO2 SENSOR COMMANDS --------------------------------------- */
 const CO2SensorCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setCo2BoundaryLevels: zod_1.z.object({
         good_medium: zod_1.z.number().min(0).max(1500),
         medium_bad: zod_1.z.number().min(0).max(1500),
-    }), getCo2BoundaryLevels: zod_1.z.object({}), setCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getCo2BoundaryLevels: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setCo2AutoZeroValue: zod_1.z.object({
         ppm: zod_1.z.number().min(0).max(1500),
-    }), getCo2AutoZeroValue: zod_1.z.object({}), setNotifyPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('20'),
+    }), getCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('21'),
+    }), setNotifyPeriod: zod_1.z.object({
         good_zone: zod_1.z.number().min(0).max(255),
         medium_zone: zod_1.z.number().min(0).max(255),
         bad_zone: zod_1.z.number().min(0).max(255),
-    }), getNotifyPeriod: zod_1.z.object({}), setCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('22'),
+    }), getNotifyPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('23'),
+    }), setCo2MeasurementPeriod: zod_1.z.object({
         good_zone: zod_1.z.number().min(0).max(255),
         medium_zone: zod_1.z.number().min(0).max(255),
         bad_zone: zod_1.z.number().min(0).max(255),
-    }), getCo2MeasurementPeriod: zod_1.z.object({}), setBuzzerNotification: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('24'),
+    }), getCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('25'),
+    }), setBuzzerNotification: zod_1.z.object({
         duration_good_beeping: zod_1.z.number().min(0).max(255),
         duration_good_loud: zod_1.z.number().min(0).max(255),
         duration_good_silent: zod_1.z.number().min(0).max(255),
@@ -611,7 +1006,10 @@ const CO2SensorCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSc
         duration_bad_beeping: zod_1.z.number().min(0).max(255),
         duration_bad_loud: zod_1.z.number().min(0).max(255),
         duration_bad_silent: zod_1.z.number().min(0).max(255),
-    }), getBuzzerNotification: zod_1.z.object({}), setCo2Led: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('26'),
+    }), getBuzzerNotification: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('27'),
+    }), setCo2Led: zod_1.z.object({
         red_good: zod_1.z.number().min(0).max(255),
         green_good: zod_1.z.number().min(0).max(255),
         blue_good: zod_1.z.number().min(0).max(255),
@@ -624,55 +1022,105 @@ const CO2SensorCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSc
         green_bad: zod_1.z.number().min(0).max(255),
         blue_bad: zod_1.z.number().min(0).max(255),
         duration_bad: zod_1.z.number().min(0).max(255),
-    }), getCo2Led: zod_1.z.object({}), setCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('28'),
+    }), getCo2Led: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('29'),
+    }), setCo2AutoZeroPeriod: zod_1.z.object({
         hours: zod_1.z.number().min(0).max(255),
-    }), getCo2AutoZeroPeriod: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('2a'),
+    }), getCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2b'),
+    }) });
 /* --------------------------------------- CO2 DISPLAY COMMANDS --------------------------------------- */
 const CO2DisplayCommandSchemas = Object.assign(Object.assign(Object.assign(Object.assign(Object.assign({}, GeneralCommandSchemas), DisplayCommandSchemas), PIRCommandSchemas), ChildLockCommandSchemas), { setCo2MeasurementBlindTime: zod_1.z.object({
         time: zod_1.z.number().min(0).max(255),
-    }), getCo2MeasurementBlindTime: zod_1.z.object({}), setCo2BoundaryLevels: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('81'),
+    }), getCo2MeasurementBlindTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('80'),
+    }), setCo2BoundaryLevels: zod_1.z.object({
         good_medium: zod_1.z.number().min(0).max(1500),
         medium_bad: zod_1.z.number().min(0).max(1500),
-    }), getCo2BoundaryLevels: zod_1.z.object({}), setCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getCo2BoundaryLevels: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setCo2AutoZeroValue: zod_1.z.object({
         ppm: zod_1.z.number().min(0).max(1500),
-    }), getCo2AutoZeroValue: zod_1.z.object({}), setCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('20'),
+    }), getCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('21'),
+    }), setCo2MeasurementPeriod: zod_1.z.object({
         good_zone: zod_1.z.number().min(0).max(255),
         medium_zone: zod_1.z.number().min(0).max(255),
         bad_zone: zod_1.z.number().min(0).max(255),
-    }), getCo2MeasurementPeriod: zod_1.z.object({}), setCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('24'),
+    }), getCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('25'),
+    }), setCo2AutoZeroPeriod: zod_1.z.object({
         hours: zod_1.z.number().min(0).max(255),
-    }), getCo2AutoZeroPeriod: zod_1.z.object({}), setCo2ImagesVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2a'),
+    }), getCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2b'),
+    }), setCo2ImagesVisibility: zod_1.z.object({
         chart: zod_1.z.boolean(),
         digital_value: zod_1.z.boolean(),
         emoji: zod_1.z.boolean(),
-    }), getCo2ImagesVisibility: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('82'),
+    }), getCo2ImagesVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('83'),
+    }) });
 /* --------------------------------------- CO2 DISPLAY LITE COMMANDS --------------------------------------- */
 const CO2DisplayLiteCommandSchemas = Object.assign(Object.assign(Object.assign(Object.assign({}, GeneralCommandSchemas), DisplayCommandSchemas), ChildLockCommandSchemas), { setCo2BoundaryLevels: zod_1.z.object({
         good_medium: zod_1.z.number().min(0).max(1500),
         medium_bad: zod_1.z.number().min(0).max(1500),
-    }), getCo2BoundaryLevels: zod_1.z.object({}), setCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getCo2BoundaryLevels: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setCo2AutoZeroValue: zod_1.z.object({
         ppm: zod_1.z.number().min(0).max(1500),
-    }), getCo2AutoZeroValue: zod_1.z.object({}), setCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('20'),
+    }), getCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('21'),
+    }), setCo2MeasurementPeriod: zod_1.z.object({
         good_zone: zod_1.z.number().min(0).max(255),
         medium_zone: zod_1.z.number().min(0).max(255),
         bad_zone: zod_1.z.number().min(0).max(255),
-    }), getCo2MeasurementPeriod: zod_1.z.object({}), setCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('24'),
+    }), getCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('25'),
+    }), setCo2AutoZeroPeriod: zod_1.z.object({
         hours: zod_1.z.number().min(0).max(255),
-    }), getCo2AutoZeroPeriod: zod_1.z.object({}), setCo2ImagesVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2a'),
+    }), getCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2b'),
+    }), setCo2ImagesVisibility: zod_1.z.object({
         chart: zod_1.z.boolean(),
         digital_value: zod_1.z.boolean(),
         emoji: zod_1.z.boolean(),
-    }), getCo2ImagesVisibility: zod_1.z.object({}), setUplinkSendingOnButtonPress: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('82'),
+    }), getCo2ImagesVisibility: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('83'),
+    }), setUplinkSendingOnButtonPress: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1),
-    }), getUplinkSendingOnButtonPress: zod_1.z.object({}), restartDevice: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('2e'),
+    }), getUplinkSendingOnButtonPress: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2f'),
+    }), restartDevice: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('a5'),
+    }) });
 /* --------------------------------------- HT SENSOR COMMANDS --------------------------------------- */
 const HTSensorCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setTemperatureCompensation: zod_1.z.object({
         negativeCompensation: zod_1.z.boolean(), // true: negative compensation, false: positive compensation
         compensation: zod_1.z.number().min(0).max(25.5).multipleOf(0.1),
-    }), getTemperatureCompensation: zod_1.z.object({}), setHumidityCompensation: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('31'),
+    }), getTemperatureCompensation: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('32'),
+    }), setHumidityCompensation: zod_1.z.object({
         negativeCompensation: zod_1.z.boolean(), // true: negative compensation, false: positive compensation
         compensation: zod_1.z.number().min(0).max(255).multipleOf(0.1),
-    }), getHumidityCompensation: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('33'),
+    }), getHumidityCompensation: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('34'),
+    }) });
 // ------------------------------------------------ AQI LED COMMANDS ------------------------------------------------
 const AQICommandSchemas = {
     setAqiLed: zod_1.z.object({
@@ -682,105 +1130,205 @@ const AQICommandSchemas = {
         greenDuration: zod_1.z.number(),
         blueBehavior: zod_1.z.number(),
         blueDuration: zod_1.z.number(),
+        commandNumber: zod_1.z.string().optional().default('05'),
     }),
 };
 /* --------------------------------------- T-FLOOD COMMANDS --------------------------------------- */
-const TFloodCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { getTemperature: zod_1.z.object({}), setFloodAlarmTime: zod_1.z.object({
+const TFloodCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { getTemperature: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('01'),
+    }), setFloodAlarmTime: zod_1.z.object({
         time: zod_1.z.number().min(0).max(255),
-    }), getFloodAlarmTime: zod_1.z.object({}), setKeepAlive: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('06'),
+    }), getFloodAlarmTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('10'),
+    }), setKeepAlive: zod_1.z.object({
         time: zod_1.z.number().min(1).max(14400),
-    }), getDeviceVersion: zod_1.z.object({}), setFloodEventSendTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('02'),
+    }), getDeviceVersion: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('04'),
+    }), setFloodEventSendTime: zod_1.z.object({
         time: zod_1.z.number().min(0).max(255),
-    }), getFloodEventSendTime: zod_1.z.object({}), setFloodEventUplinkType: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('08'),
+    }), getFloodEventSendTime: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('09'),
+    }), setFloodEventUplinkType: zod_1.z.object({
         type: zod_1.z.enum(['01', '00']), // 01: confirmedUplinks, 00: unconfirmedUplinks
-    }), getFloodEventUplinkType: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('13'),
+    }), getFloodEventUplinkType: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('14'),
+    }) });
 /* --------------------------------------- TRING THERMOSTAT COMMANDS --------------------------------------- */
 const TringThermostatCommandSchemas = {
     setThermostatTarget: zod_1.z.object({
         target: zod_1.z.number(),
+        commandNumber: zod_1.z.string().optional().default('01'),
     }),
     setThermostatConfig: zod_1.z.object({
         time: zod_1.z.number(),
         temp_span: zod_1.z.number(),
         temp_sampling: zod_1.z.number(),
         target: zod_1.z.number(),
+        commandNumber: zod_1.z.string().optional().default('02'),
     }),
     setKeepAlive: zod_1.z.object({
         time: zod_1.z.number(),
+        commandNumber: zod_1.z.string().optional().default('02'),
     }),
 };
 /* --------------------------------------- DSK DEVICE COMMANDS --------------------------------------- */
 const DSKDeviceCommandSchemas = {
     setVrvStatus: zod_1.z.object({
         status: zod_1.z.number(),
+        commandNumber: zod_1.z.string().optional().default('1e'),
     }),
     setVrvOnTime: zod_1.z.object({
         time: zod_1.z.number(),
+        commandNumber: zod_1.z.string().optional().default('20'),
     }),
     setVrvOffTime: zod_1.z.object({
         time: zod_1.z.number(),
+        commandNumber: zod_1.z.string().optional().default('21'),
     }),
 };
 /* --------------------------------------- BUTTON COMMANDS --------------------------------------- */
 const ButtonCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setSendEventLater: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1), // 1: send later when allowed, 0: Don't send later when allowed
-    }), getSendEventLater: zod_1.z.object({}), clearPressEventCounter: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getSendEventLater: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), clearPressEventCounter: zod_1.z.object({
         value: zod_1.z.number().min(1).max(3),
-    }), restartDevice: zod_1.z.object({}), getSinglePressEventCounter: zod_1.z.object({}), getDoublePressEventCounter: zod_1.z.object({}), getTriplePressEventCounter: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('20'),
+    }), restartDevice: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('a5'),
+    }), getSinglePressEventCounter: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('b1'),
+    }), getDoublePressEventCounter: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('b2'),
+    }), getTriplePressEventCounter: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('b3'),
+    }) });
 /* --------------------------------------- HT PIR LITE COMMANDS --------------------------------------- */
 const HTPirLiteCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setUplinkSendingOnButtonPress: zod_1.z.object({
         value: zod_1.z.number().min(0).max(1),
-    }), getUplinkSendingOnButtonPress: zod_1.z.object({}), restartDevice: zod_1.z.object({}), setPIRSensorState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2e'),
+    }), getUplinkSendingOnButtonPress: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2f'),
+    }), restartDevice: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('a5'),
+    }), setPIRSensorState: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: disabled, 1: enabled
-    }), getPIRSensorState: zod_1.z.object({}), setPIRSensorSensitivity: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('36'),
+    }), getPIRSensorState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('37'),
+    }), setPIRSensorSensitivity: zod_1.z.object({
         sensitivity: zod_1.z.number().min(12).max(255),
-    }), getPIRSensorSensitivity: zod_1.z.object({}), setOccupancyTimeout: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3e'),
+    }), getPIRSensorSensitivity: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3f'),
+    }), setOccupancyTimeout: zod_1.z.object({
         timeout: zod_1.z.number().min(15).max(65535), // in seconds, between 15 and 65535
-    }), getOccupancyTimeout: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('38'),
+    }), getOccupancyTimeout: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('39'),
+    }) });
 /* --------------------------------------- CO2 PIR LITE COMMANDS --------------------------------------- */
 const Co2PirLiteCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setPIRSensorState: zod_1.z.object({
         state: zod_1.z.number().min(0).max(1), // 0: disabled, 1: enabled
-    }), getPIRSensorState: zod_1.z.object({}), setPIRSensorSensitivity: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('36'),
+    }), getPIRSensorState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('37'),
+    }), setPIRSensorSensitivity: zod_1.z.object({
         sensitivity: zod_1.z.number().min(12).max(255),
-    }), getPIRSensorSensitivity: zod_1.z.object({}), setOccupancyTimeout: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3e'),
+    }), getPIRSensorSensitivity: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('3f'),
+    }), setOccupancyTimeout: zod_1.z.object({
         timeout: zod_1.z.number().min(15).max(65535), // in seconds, between 15 and 65535
-    }), getOccupancyTimeout: zod_1.z.object({}), restartDevice: zod_1.z.object({}), setCo2BoundaryLevels: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('38'),
+    }), getOccupancyTimeout: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('39'),
+    }), restartDevice: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('a5'),
+    }), setCo2BoundaryLevels: zod_1.z.object({
         good_medium: zod_1.z.number().min(0).max(1500),
         medium_bad: zod_1.z.number().min(0).max(1500),
-    }), getCo2BoundaryLevels: zod_1.z.object({}), setCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getCo2BoundaryLevels: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setCo2AutoZeroValue: zod_1.z.object({
         ppm: zod_1.z.number().min(0).max(1500),
-    }), getCo2AutoZeroValue: zod_1.z.object({}), setCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('20'),
+    }), getCo2AutoZeroValue: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('21'),
+    }), setCo2MeasurementPeriod: zod_1.z.object({
         good_zone: zod_1.z.number().min(0).max(255),
         medium_zone: zod_1.z.number().min(0).max(255),
         bad_zone: zod_1.z.number().min(0).max(255),
-    }), getCo2MeasurementPeriod: zod_1.z.object({}), setCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('24'),
+    }), getCo2MeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('25'),
+    }), setCo2AutoZeroPeriod: zod_1.z.object({
         hours: zod_1.z.number().min(0).max(255),
-    }), getCo2AutoZeroPeriod: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('2a'),
+    }), getCo2AutoZeroPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2b'),
+    }) });
 /* --------------------------------------- Melissa --------------------------------------- */
 const MelissaCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setIrCodeRecording: zod_1.z.object({
         time: zod_1.z.number().min(0).max(255),
         position: zod_1.z.number().min(0).max(10),
+        commandNumber: zod_1.z.string().optional().default('09'),
     }) });
 /* --------------------------------------- MULTISENSOR COMMANDS --------------------------------------- */
 const MultiSensorCommandSchemas = Object.assign(Object.assign({}, GeneralCommandSchemas), { setLightState: zod_1.z.object({
         enabled: zod_1.z.boolean(),
-    }), getLightState: zod_1.z.object({}), setHallState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1e'),
+    }), getLightState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('1f'),
+    }), setHallState: zod_1.z.object({
         enabled: zod_1.z.boolean(),
-    }), getHallState: zod_1.z.object({}), setHallBlindPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('20'),
+    }), getHallState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('21'),
+    }), setHallBlindPeriod: zod_1.z.object({
         period: zod_1.z.number().min(0).max(65535),
-    }), getHallBlindPeriod: zod_1.z.object({}), setMicrophoneState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('22'),
+    }), getHallBlindPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('23'),
+    }), setMicrophoneState: zod_1.z.object({
         enabled: zod_1.z.boolean(),
-    }), getMicrophoneState: zod_1.z.object({}), setMicrophoneSamplingPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('24'),
+    }), getMicrophoneState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('25'),
+    }), setMicrophoneSamplingPeriod: zod_1.z.object({
         period: zod_1.z.number().min(0).max(65535),
-    }), getMicrophoneSamplingPeriod: zod_1.z.object({}), setGasState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('26'),
+    }), getMicrophoneSamplingPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('27'),
+    }), setGasState: zod_1.z.object({
         enabled: zod_1.z.boolean(),
-    }), getGasState: zod_1.z.object({}), setGasMeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('28'),
+    }), getGasState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('29'),
+    }), setGasMeasurementPeriod: zod_1.z.object({
         minutes: zod_1.z.number().min(0).max(255),
-    }), getGasMeasurementPeriod: zod_1.z.object({}), setPirState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2a'),
+    }), getGasMeasurementPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2b'),
+    }), setPirState: zod_1.z.object({
         enabled: zod_1.z.boolean(),
-    }), getPirState: zod_1.z.object({}), setPirActiveReportingPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2c'),
+    }), getPirState: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2d'),
+    }), setPirActiveReportingPeriod: zod_1.z.object({
         time: zod_1.z.number().min(0).max(65535),
-    }), getPirActiveReportingPeriod: zod_1.z.object({}), getRegion: zod_1.z.object({}), restart: zod_1.z.object({}) });
+        commandNumber: zod_1.z.string().optional().default('2e'),
+    }), getPirActiveReportingPeriod: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('2f'),
+    }), restart: zod_1.z.object({
+        commandNumber: zod_1.z.string().optional().default('a5'),
+    }) });
 /* --------------------------------------- EXPORT ALL SCHEMA GROUPS --------------------------------------- */
 exports.DeviceCommandSchemas = {
     GeneralCommandSchemas,