matterbridge 3.4.7 → 3.5.0-dev-20260113-96c82db

package/dist/devices/dishwasher.d.ts

@@ -1,25 +1,3 @@
-/**
- * @description This file contains the Dishwasher class.
- * @file src/devices/dishwasher.ts
- * @author Luca Liguori
- * @created 2025-05-25
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { MaybePromise } from '@matter/general';
 import { OperationalState } from '@matter/types/clusters/operational-state';
 import { ModeBase } from '@matter/types/clusters/mode-base';
@@ -27,40 +5,8 @@ import { DishwasherMode } from '@matter/types/clusters/dishwasher-mode';
 import { DishwasherModeServer } from '@matter/node/behaviors/dishwasher-mode';
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 export declare class Dishwasher extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the DishWasher class.
-     *
-     * @param {string} name - The name of the dish washer.
-     * @param {string} serial - The serial number of the dish washer.
-     * @param {number} [currentMode] - The current mode of the dish washer. Defaults to 2 (Normal mode). Dead Front OnOff Cluster will set this to 2 when turned off. Persistent attribute.
-     * @param {DishwasherMode.ModeOption[]} [supportedModes] - The supported modes of the dish washer. Defaults to a set of common modes (which include Light, Normal, Heavy). Fixed attribute.
-     * @param {number} [selectedTemperatureLevel] - The selected temperature level as an index of the supportedTemperatureLevels array. Defaults to 1 (which corresponds to 'Warm').
-     * @param {string[]} [supportedTemperatureLevels] - The supported temperature levels. Defaults to ['Cold', 'Warm', 'Hot', '30°', '40°', '60°', '80°']. Fixed attribute.
-     * @param {number} [temperatureSetpoint] - The temperature setpoint * 100. Defaults to 40 * 100 (which corresponds to 40°C).
-     * @param {number} [minTemperature] - The minimum temperature * 100. Defaults to 30 * 100 (which corresponds to 30°C). Fixed attribute.
-     * @param {number} [maxTemperature] - The maximum temperature * 100. Defaults to 60 * 100 (which corresponds to 60°C). Fixed attribute.
-     * @param {number} [step] - The step size for temperature changes. Defaults to 10 * 100 (which corresponds to 10°C). Fixed attribute.
-     * @param {OperationalState.OperationalStateEnum} [operationalState] - The operational state of the laundry washer. Defaults to OperationalState.OperationalStateEnum.Off.
-     *
-     * Remarks:
-     * - If `temperatureSetpoint` is provided, the `createNumberTemperatureControlClusterServer` method will be used to create the TemperatureControl Cluster Server with features TemperatureNumber and TemperatureStep.
-     * - If `temperatureSetpoint` is not provided, the `createLevelTemperatureControlClusterServer` method will be used to create the TemperatureControl Cluster Server with feature TemperatureLevel.
-     */
     constructor(name: string, serial: string, currentMode?: number, supportedModes?: DishwasherMode.ModeOption[], selectedTemperatureLevel?: number, supportedTemperatureLevels?: string[], temperatureSetpoint?: number, minTemperature?: number, maxTemperature?: number, step?: number, operationalState?: OperationalState.OperationalStateEnum);
-    /**
-     * Creates a default Dishwasher Mode Cluster Server.
-     *
-     * @param {number} currentMode - The current mode of the dishwasher. Persistent attribute.
-     * @param {DishwasherMode.ModeOption[]} supportedModes - The supported modes of the dishwasher. Defaults to a set of common modes (Light, Normal, Heavy). Fixed attribute.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultDishwasherModeClusterServer(currentMode?: number, supportedModes?: DishwasherMode.ModeOption[]): this;
-    /**
-     * Creates a default Dishwasher Alarm Cluster Server.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultDishwasherAlarmClusterServer(): this;
 }
 export declare class MatterbridgeDishwasherModeServer extends DishwasherModeServer {
@@ -68,4 +14,3 @@ export declare class MatterbridgeDishwasherModeServer extends DishwasherModeServ
     protected handleOnOffChange(onOff: boolean): void;
     changeToMode(request: ModeBase.ChangeToModeRequest): MaybePromise<ModeBase.ChangeToModeResponse>;
 }
-//# sourceMappingURL=dishwasher.d.ts.map

package/dist/devices/dishwasher.js

@@ -1,54 +1,12 @@
-/**
- * @description This file contains the Dishwasher class.
- * @file src/devices/dishwasher.ts
- * @author Luca Liguori
- * @created 2025-05-25
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { ModeBase } from '@matter/types/clusters/mode-base';
 import { DishwasherMode } from '@matter/types/clusters/dishwasher-mode';
 import { DishwasherModeServer } from '@matter/node/behaviors/dishwasher-mode';
 import { DishwasherAlarmServer } from '@matter/node/behaviors/dishwasher-alarm';
-// Matterbridge
 import { dishwasher, powerSource } from '../matterbridgeDeviceTypes.js';
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 import { MatterbridgeOnOffServer, MatterbridgeServer } from '../matterbridgeBehaviors.js';
 import { createLevelTemperatureControlClusterServer, createNumberTemperatureControlClusterServer } from './temperatureControl.js';
 export class Dishwasher extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the DishWasher class.
-     *
-     * @param {string} name - The name of the dish washer.
-     * @param {string} serial - The serial number of the dish washer.
-     * @param {number} [currentMode] - The current mode of the dish washer. Defaults to 2 (Normal mode). Dead Front OnOff Cluster will set this to 2 when turned off. Persistent attribute.
-     * @param {DishwasherMode.ModeOption[]} [supportedModes] - The supported modes of the dish washer. Defaults to a set of common modes (which include Light, Normal, Heavy). Fixed attribute.
-     * @param {number} [selectedTemperatureLevel] - The selected temperature level as an index of the supportedTemperatureLevels array. Defaults to 1 (which corresponds to 'Warm').
-     * @param {string[]} [supportedTemperatureLevels] - The supported temperature levels. Defaults to ['Cold', 'Warm', 'Hot', '30°', '40°', '60°', '80°']. Fixed attribute.
-     * @param {number} [temperatureSetpoint] - The temperature setpoint * 100. Defaults to 40 * 100 (which corresponds to 40°C).
-     * @param {number} [minTemperature] - The minimum temperature * 100. Defaults to 30 * 100 (which corresponds to 30°C). Fixed attribute.
-     * @param {number} [maxTemperature] - The maximum temperature * 100. Defaults to 60 * 100 (which corresponds to 60°C). Fixed attribute.
-     * @param {number} [step] - The step size for temperature changes. Defaults to 10 * 100 (which corresponds to 10°C). Fixed attribute.
-     * @param {OperationalState.OperationalStateEnum} [operationalState] - The operational state of the laundry washer. Defaults to OperationalState.OperationalStateEnum.Off.
-     *
-     * Remarks:
-     * - If `temperatureSetpoint` is provided, the `createNumberTemperatureControlClusterServer` method will be used to create the TemperatureControl Cluster Server with features TemperatureNumber and TemperatureStep.
-     * - If `temperatureSetpoint` is not provided, the `createLevelTemperatureControlClusterServer` method will be used to create the TemperatureControl Cluster Server with feature TemperatureLevel.
-     */
     constructor(name, serial, currentMode, supportedModes, selectedTemperatureLevel, supportedTemperatureLevels, temperatureSetpoint, minTemperature, maxTemperature, step, operationalState) {
         super([dishwasher, powerSource], { id: `${name.replaceAll(' ', '')}-${serial.replaceAll(' ', '')}` });
         this.createDefaultIdentifyClusterServer();
@@ -63,14 +21,6 @@ export class Dishwasher extends MatterbridgeEndpoint {
             createLevelTemperatureControlClusterServer(this, selectedTemperatureLevel, supportedTemperatureLevels);
         this.createDefaultOperationalStateClusterServer(operationalState);
     }
-    /**
-     * Creates a default Dishwasher Mode Cluster Server.
-     *
-     * @param {number} currentMode - The current mode of the dishwasher. Persistent attribute.
-     * @param {DishwasherMode.ModeOption[]} supportedModes - The supported modes of the dishwasher. Defaults to a set of common modes (Light, Normal, Heavy). Fixed attribute.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultDishwasherModeClusterServer(currentMode = 2, supportedModes = [
         { label: 'Light', mode: 1, modeTags: [{ value: DishwasherMode.ModeTag.Light }] },
         { label: 'Normal', mode: 2, modeTags: [{ value: DishwasherMode.ModeTag.Normal }] },
@@ -82,11 +32,6 @@ export class Dishwasher extends MatterbridgeEndpoint {
         });
         return this;
     }
-    /**
-     * Creates a default Dishwasher Alarm Cluster Server.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultDishwasherAlarmClusterServer() {
         this.behaviors.require(DishwasherAlarmServer, {
             mask: { inflowError: true, drainError: true, doorError: true, tempTooLow: true, tempTooHigh: true, waterLevelError: true },
@@ -103,7 +48,6 @@ export class MatterbridgeDishwasherModeServer extends DishwasherModeServer {
         this.state.currentMode = 2;
         this.reactTo(this.agent.get(MatterbridgeOnOffServer).events.onOff$Changed, this.handleOnOffChange);
     }
-    // Dead Front OnOff Cluster
     handleOnOffChange(onOff) {
         const device = this.endpoint.stateOf(MatterbridgeServer);
         if (onOff === false) {
@@ -127,4 +71,3 @@ export class MatterbridgeDishwasherModeServer extends DishwasherModeServer {
         }
     }
 }
-//# sourceMappingURL=dishwasher.js.map

package/dist/devices/evse.d.ts

@@ -1,26 +1,3 @@
-/**
- * @description This file contains the Evse class.
- * @file src/devices/energy-evse.ts
- * @author Luca Liguori
- * @contributor Ludovic BOUÉ
- * @created 2025-05-27
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { MaybePromise } from '@matter/general';
 import { EnergyEvseMode } from '@matter/types/clusters/energy-evse-mode';
 import { EnergyEvse } from '@matter/types/clusters/energy-evse';
@@ -29,41 +6,8 @@ import { EnergyEvseServer } from '@matter/node/behaviors/energy-evse';
 import { EnergyEvseModeServer } from '@matter/node/behaviors/energy-evse-mode';
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 export declare class Evse extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the EVSE class.
-     *
-     * @param {string} name - The name of the EVSE.
-     * @param {string} serial - The serial number of the EVSE.
-     * @param {number} [currentMode] - The current mode of the EnergyEvseMode cluster. Defaults to mode 1 (EnergyEvseMode.ModeTag.Manual).
-     * @param {EnergyEvseMode.ModeOption[]} [supportedModes] - The supported modes for the EnergyEvseMode cluster. This is a fixed attribute that defaults to a predefined set of EnergyEvseMode cluster modes.
-     * @param {EnergyEvse.State} [state] - The current state of the EVSE. Defaults to NotPluggedIn.
-     * @param {EnergyEvse.SupplyState} [supplyState] - The supply state of the EVSE. Defaults to Disabled.
-     * @param {EnergyEvse.FaultState} [faultState] - The fault state of the EVSE. Defaults to NoError.
-     * @param {number} [voltage] - The voltage value in millivolts. Defaults to null if not provided.
-     * @param {number} [current] - The current value in milliamperes. Defaults to null if not provided.
-     * @param {number} [power] - The power value in milliwatts. Defaults to null if not provided.
-     * @param {number} [energy] - The total consumption value in mW/h. Defaults to null if not provided.
-     * @param {number} [absMinPower] - Indicate the minimum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     * @param {number} [absMaxPower] - Indicate the maximum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     */
     constructor(name: string, serial: string, currentMode?: number, supportedModes?: EnergyEvseMode.ModeOption[], state?: EnergyEvse.State, supplyState?: EnergyEvse.SupplyState, faultState?: EnergyEvse.FaultState, voltage?: number | bigint | null, current?: number | bigint | null, power?: number | bigint | null, energy?: number | bigint | null, absMinPower?: number, absMaxPower?: number);
-    /**
-     * Creates a default EnergyEvseServer Cluster Server.
-     *
-     * @param {EnergyEvse.State} [state] - The initial state of the EnergyEvse cluster. Defaults to EnergyEvse.State.NotPluggedIn.
-     * @param {EnergyEvse.SupplyState} [supplyState] - The initial supply state of the EnergyEvse cluster. Defaults to EnergyEvse.SupplyState.ChargingEnabled.
-     * @param {EnergyEvse.FaultState} [faultState] - The initial fault state of the EnergyEvse cluster. Defaults to EnergyEvse.FaultState.NoError.
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultEnergyEvseClusterServer(state?: EnergyEvse.State, supplyState?: EnergyEvse.SupplyState, faultState?: EnergyEvse.FaultState): this;
-    /**
-     * Creates a default EnergyEvseMode Cluster Server.
-     *
-     * @param {number} [currentMode] - The current mode of the EnergyEvseMode cluster. Defaults to mode 1 (EnergyEvseMode.ModeTag.Manual).
-     * @param {EnergyEvseMode.ModeOption[]} [supportedModes] - The supported modes for the EnergyEvseMode cluster. Defaults all EnergyEvseMode cluster modes.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultEnergyEvseModeClusterServer(currentMode?: number, supportedModes?: EnergyEvseMode.ModeOption[]): this;
 }
 export declare class MatterbridgeEnergyEvseServer extends EnergyEvseServer {
@@ -73,4 +17,3 @@ export declare class MatterbridgeEnergyEvseServer extends EnergyEvseServer {
 export declare class MatterbridgeEnergyEvseModeServer extends EnergyEvseModeServer {
     changeToMode(request: ModeBase.ChangeToModeRequest): MaybePromise<ModeBase.ChangeToModeResponse>;
 }
-//# sourceMappingURL=evse.d.ts.map

package/dist/devices/evse.js

@@ -1,54 +1,13 @@
-/**
- * @description This file contains the Evse class.
- * @file src/devices/energy-evse.ts
- * @author Luca Liguori
- * @contributor Ludovic BOUÉ
- * @created 2025-05-27
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { EnergyEvseMode } from '@matter/types/clusters/energy-evse-mode';
 import { EnergyEvse } from '@matter/types/clusters/energy-evse';
 import { DeviceEnergyManagement } from '@matter/types/clusters/device-energy-management';
 import { ModeBase } from '@matter/types/clusters/mode-base';
 import { EnergyEvseServer } from '@matter/node/behaviors/energy-evse';
 import { EnergyEvseModeServer } from '@matter/node/behaviors/energy-evse-mode';
-// Matterbridge
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 import { MatterbridgeServer } from '../matterbridgeBehaviors.js';
 import { deviceEnergyManagement, electricalSensor, evse, powerSource } from '../matterbridgeDeviceTypes.js';
 export class Evse extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the EVSE class.
-     *
-     * @param {string} name - The name of the EVSE.
-     * @param {string} serial - The serial number of the EVSE.
-     * @param {number} [currentMode] - The current mode of the EnergyEvseMode cluster. Defaults to mode 1 (EnergyEvseMode.ModeTag.Manual).
-     * @param {EnergyEvseMode.ModeOption[]} [supportedModes] - The supported modes for the EnergyEvseMode cluster. This is a fixed attribute that defaults to a predefined set of EnergyEvseMode cluster modes.
-     * @param {EnergyEvse.State} [state] - The current state of the EVSE. Defaults to NotPluggedIn.
-     * @param {EnergyEvse.SupplyState} [supplyState] - The supply state of the EVSE. Defaults to Disabled.
-     * @param {EnergyEvse.FaultState} [faultState] - The fault state of the EVSE. Defaults to NoError.
-     * @param {number} [voltage] - The voltage value in millivolts. Defaults to null if not provided.
-     * @param {number} [current] - The current value in milliamperes. Defaults to null if not provided.
-     * @param {number} [power] - The power value in milliwatts. Defaults to null if not provided.
-     * @param {number} [energy] - The total consumption value in mW/h. Defaults to null if not provided.
-     * @param {number} [absMinPower] - Indicate the minimum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     * @param {number} [absMaxPower] - Indicate the maximum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     */
     constructor(name, serial, currentMode, supportedModes, state, supplyState, faultState, voltage = null, current = null, power = null, energy = null, absMinPower, absMaxPower) {
         super([evse, powerSource, electricalSensor, deviceEnergyManagement], { id: `${name.replaceAll(' ', '')}-${serial.replaceAll(' ', '')}` });
         this.createDefaultIdentifyClusterServer()
@@ -63,47 +22,30 @@ export class Evse extends MatterbridgeEndpoint {
             .createDefaultEnergyEvseModeClusterServer(currentMode, supportedModes)
             .addRequiredClusterServers();
     }
-    /**
-     * Creates a default EnergyEvseServer Cluster Server.
-     *
-     * @param {EnergyEvse.State} [state] - The initial state of the EnergyEvse cluster. Defaults to EnergyEvse.State.NotPluggedIn.
-     * @param {EnergyEvse.SupplyState} [supplyState] - The initial supply state of the EnergyEvse cluster. Defaults to EnergyEvse.SupplyState.ChargingEnabled.
-     * @param {EnergyEvse.FaultState} [faultState] - The initial fault state of the EnergyEvse cluster. Defaults to EnergyEvse.FaultState.NoError.
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultEnergyEvseClusterServer(state, supplyState, faultState) {
         this.behaviors.require(MatterbridgeEnergyEvseServer, {
             state: state !== undefined ? state : EnergyEvse.State.NotPluggedIn,
             supplyState: supplyState !== undefined ? supplyState : EnergyEvse.SupplyState.ChargingEnabled,
             faultState: faultState !== undefined ? faultState : EnergyEvse.FaultState.NoError,
-            chargingEnabledUntil: null, // Persistent attribute. A null value indicates the EVSE is always enabled for charging.
-            circuitCapacity: 32_000, // Persistent attribute in mA. 32A in mA.
-            minimumChargeCurrent: 6_000, // Persistent attribute in mA. 6A in mA.
-            maximumChargeCurrent: 32_000, // Persistent attribute in mA. 32A in mA.
-            userMaximumChargeCurrent: 32_000, // Persistent attribute in mA. 32A in mA.
-            sessionId: null, // Persistent attribute
-            sessionDuration: null, // Persistent attribute
-            sessionEnergyCharged: null, // Persistent attribute
+            chargingEnabledUntil: null,
+            circuitCapacity: 32_000,
+            minimumChargeCurrent: 6_000,
+            maximumChargeCurrent: 32_000,
+            userMaximumChargeCurrent: 32_000,
+            sessionId: null,
+            sessionDuration: null,
+            sessionEnergyCharged: null,
         });
         return this;
     }
-    /**
-     * Creates a default EnergyEvseMode Cluster Server.
-     *
-     * @param {number} [currentMode] - The current mode of the EnergyEvseMode cluster. Defaults to mode 1 (EnergyEvseMode.ModeTag.Manual).
-     * @param {EnergyEvseMode.ModeOption[]} [supportedModes] - The supported modes for the EnergyEvseMode cluster. Defaults all EnergyEvseMode cluster modes.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultEnergyEvseModeClusterServer(currentMode, supportedModes) {
         this.behaviors.require(MatterbridgeEnergyEvseModeServer, {
             supportedModes: supportedModes ?? [
                 { label: 'On demand', mode: 1, modeTags: [{ value: EnergyEvseMode.ModeTag.Manual }] },
                 { label: 'Scheduled', mode: 2, modeTags: [{ value: EnergyEvseMode.ModeTag.TimeOfUse }] },
                 { label: 'Solar charging', mode: 3, modeTags: [{ value: EnergyEvseMode.ModeTag.SolarCharging }] },
-                // { label: 'Home to vehicle and Vehicle to home', mode: 4, modeTags: [{ value: EnergyEvseMode.ModeTag.V2X }] }, // This mode is not valid in charging only EVSEs
-            ], // FixedAttribute
-            currentMode: currentMode ?? 1, // Persistent attribute
+            ],
+            currentMode: currentMode ?? 1,
         });
         return this;
     }
@@ -119,8 +61,6 @@ export class MatterbridgeEnergyEvseServer extends EnergyEvseServer {
             this.state.state = EnergyEvse.State.PluggedInDemand;
         }
         this.state.chargingEnabledUntil = 0;
-        // super.disable();
-        // disable is not implemented in matter.js
     }
     enableCharging(request) {
         const device = this.endpoint.stateOf(MatterbridgeServer);
@@ -134,9 +74,6 @@ export class MatterbridgeEnergyEvseServer extends EnergyEvseServer {
         this.state.chargingEnabledUntil = request.chargingEnabledUntil;
         this.state.minimumChargeCurrent = request.minimumChargeCurrent;
         this.state.maximumChargeCurrent = request.maximumChargeCurrent;
-        // The implementation should also stop the charging session at the required time and update the sessionId, sessionDuration, and sessionEnergyCharged attributes if needed.
-        // super.enableCharging();
-        // enableCharging is not implemented in matter.js
     }
 }
 export class MatterbridgeEnergyEvseModeServer extends EnergyEvseModeServer {
@@ -154,4 +91,3 @@ export class MatterbridgeEnergyEvseModeServer extends EnergyEvseModeServer {
         return { status: ModeBase.ModeChangeStatus.Success, statusText: 'Success' };
     }
 }
-//# sourceMappingURL=evse.js.map

package/dist/devices/export.d.ts

@@ -14,4 +14,3 @@ export * from './evse.js';
 export * from './solarPower.js';
 export * from './batteryStorage.js';
 export * from './heatPump.js';
-//# sourceMappingURL=export.d.ts.map

package/dist/devices/export.js

@@ -1,8 +1,5 @@
-// Chapter 10. Media Device Types - Single class device types
 export * from './speaker.js';
-// Chapter 12. Robotic Device Types - Single class device types
 export * from './roboticVacuumCleaner.js';
-// Chapter 13. Appliances Device Types - Single class device types
 export * from './laundryWasher.js';
 export * from './laundryDryer.js';
 export * from './extractorHood.js';
@@ -12,10 +9,8 @@ export * from './oven.js';
 export * from './cooktop.js';
 export * from './refrigerator.js';
 export * from './airConditioner.js';
-// Chapter 14. Energy Device Types - Single class device types
 export * from './waterHeater.js';
 export * from './evse.js';
 export * from './solarPower.js';
 export * from './batteryStorage.js';
 export * from './heatPump.js';
-//# sourceMappingURL=export.js.map

package/dist/devices/extractorHood.d.ts

@@ -1,46 +1,5 @@
-/**
- * @description This file contains the ExtractorHood class.
- * @file src/devices/extractorHood.ts
- * @author Luca Liguori
- * @created 2025-05-25
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { ResourceMonitoring } from '@matter/types/clusters/resource-monitoring';
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 export declare class ExtractorHood extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the ExtractorHood class.
-     *
-     * @param {string} name - The name of the extractor hood.
-     * @param {string} serial - The serial number of the extractor hood.
-     *
-     * @param {number} [hepaCondition] - The initial HEPA filter condition (range 0-100). Default is 100.
-     * @param {ResourceMonitoring.ChangeIndication} hepaChangeIndication - The initial HEPA filter change indication. Default is ResourceMonitoring.ChangeIndication.Ok.
-     * @param {boolean | undefined} hepaInPlaceIndicator - The HEPA filter in-place indicator. Default is true.
-     * @param {number | null | undefined} hepaLastChangedTime - The last time the HEPA filter was changed. Default is null.
-     * @param {ResourceMonitoring.ReplacementProduct[]} hepaReplacementProductList - The list of HEPA filter replacement products. Default is an empty array.
-     
-     * @param {number} [activatedCarbonCondition] - The initial activated carbon filter condition (range 0-100). Default is 100.
-     * @param {ResourceMonitoring.ChangeIndication} activatedCarbonChangeIndication - The initial activated carbon filter change indication. Default is ResourceMonitoring.ChangeIndication.Ok.
-     * @param {boolean | undefined} activatedCarbonInPlaceIndicator - The activated carbon filter in-place indicator. Default is true.
-     * @param {number | null | undefined} activatedCarbonLastChangedTime - The last time the activated carbon filter was changed. Default is null.
-     * @param {ResourceMonitoring.ReplacementProduct[]} activatedCarbonReplacementProductList - The list of activated carbon filter replacement products. Default is an empty array.
-     */
     constructor(name: string, serial: string, hepaCondition?: number, hepaChangeIndication?: ResourceMonitoring.ChangeIndication, hepaInPlaceIndicator?: boolean | undefined, hepaLastChangedTime?: number | null | undefined, hepaReplacementProductList?: ResourceMonitoring.ReplacementProduct[], activatedCarbonCondition?: number, activatedCarbonChangeIndication?: ResourceMonitoring.ChangeIndication, activatedCarbonInPlaceIndicator?: boolean | undefined, activatedCarbonLastChangedTime?: number | null | undefined, activatedCarbonReplacementProductList?: ResourceMonitoring.ReplacementProduct[]);
 }
-//# sourceMappingURL=extractorHood.d.ts.map

package/dist/devices/extractorHood.js

@@ -1,49 +1,7 @@
-/**
- * @description This file contains the ExtractorHood class.
- * @file src/devices/extractorHood.ts
- * @author Luca Liguori
- * @created 2025-05-25
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-// Imports from @matter
 import { ResourceMonitoring } from '@matter/types/clusters/resource-monitoring';
-// Matterbridge
 import { extractorHood, powerSource } from '../matterbridgeDeviceTypes.js';
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 export class ExtractorHood extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the ExtractorHood class.
-     *
-     * @param {string} name - The name of the extractor hood.
-     * @param {string} serial - The serial number of the extractor hood.
-     *
-     * @param {number} [hepaCondition] - The initial HEPA filter condition (range 0-100). Default is 100.
-     * @param {ResourceMonitoring.ChangeIndication} hepaChangeIndication - The initial HEPA filter change indication. Default is ResourceMonitoring.ChangeIndication.Ok.
-     * @param {boolean | undefined} hepaInPlaceIndicator - The HEPA filter in-place indicator. Default is true.
-     * @param {number | null | undefined} hepaLastChangedTime - The last time the HEPA filter was changed. Default is null.
-     * @param {ResourceMonitoring.ReplacementProduct[]} hepaReplacementProductList - The list of HEPA filter replacement products. Default is an empty array.
-     
-     * @param {number} [activatedCarbonCondition] - The initial activated carbon filter condition (range 0-100). Default is 100.
-     * @param {ResourceMonitoring.ChangeIndication} activatedCarbonChangeIndication - The initial activated carbon filter change indication. Default is ResourceMonitoring.ChangeIndication.Ok.
-     * @param {boolean | undefined} activatedCarbonInPlaceIndicator - The activated carbon filter in-place indicator. Default is true.
-     * @param {number | null | undefined} activatedCarbonLastChangedTime - The last time the activated carbon filter was changed. Default is null.
-     * @param {ResourceMonitoring.ReplacementProduct[]} activatedCarbonReplacementProductList - The list of activated carbon filter replacement products. Default is an empty array.
-     */
     constructor(name, serial, hepaCondition = 100, hepaChangeIndication = ResourceMonitoring.ChangeIndication.Ok, hepaInPlaceIndicator = true, hepaLastChangedTime = null, hepaReplacementProductList = [], activatedCarbonCondition = 100, activatedCarbonChangeIndication = ResourceMonitoring.ChangeIndication.Ok, activatedCarbonInPlaceIndicator = true, activatedCarbonLastChangedTime = null, activatedCarbonReplacementProductList = []) {
         super([extractorHood, powerSource], { id: `${name.replaceAll(' ', '')}-${serial.replaceAll(' ', '')}` });
         this.createDefaultIdentifyClusterServer();
@@ -75,4 +33,3 @@ export class ExtractorHood extends MatterbridgeEndpoint {
         });
     }
 }
-//# sourceMappingURL=extractorHood.js.map

package/dist/devices/heatPump.d.ts

@@ -1,47 +1,4 @@
-/**
- * @description This file contains the HeatPump class.
- * @file src/devices/heatPump.ts
- * @author Luca Liguori
- * @created 2025-06-29
- * @version 1.0.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 export declare class HeatPump extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the HeatPump class.
-     *
-     * @param {string} name - The name of the HeatPump.
-     * @param {string} serial - The serial number of the HeatPump.
-     * @param {number} voltage - The voltage value in millivolts.
-     * @param {number} current - The current value in milliamperes.
-     * @param {number} power - The power value in milliwatts.
-     * @param {number} energyImported - The total production value in mW/h.
-     * @param {number} [absMinPower] - Indicate the minimum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     * @param {number} [absMaxPower] - Indicate the maximum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     *
-     * @remarks
-     * - The HeatPump includes clusters for power source, electrical power measurement, electrical energy measurement, and device energy management.
-     * - It also includes child devices for flow temperature, return temperature, and a thermostat.
-     * - The flow and return temperature sensors are set to default values of 45.00°C and 35.00°C respectively.
-     * - The heating only thermostat is set up with a default temperature setpoint of 21.00°C.
-     * - The device energy management cluster is set to `esaType` as `SpaceHeating`, `esaCanGenerate` as `false`, and `esaState` as `Online`.
-     * - The absolute minimum and maximum power values can be set to indicate the range of power consumption for the heat pump.
-     */
     constructor(name: string, serial: string, voltage?: number | bigint | null, current?: number | bigint | null, power?: number | bigint | null, energyImported?: number | bigint | null, absMinPower?: number, absMaxPower?: number);
 }
-//# sourceMappingURL=heatPump.d.ts.map

package/dist/devices/heatPump.js

@@ -1,52 +1,8 @@
-/**
- * @description This file contains the HeatPump class.
- * @file src/devices/heatPump.ts
- * @author Luca Liguori
- * @created 2025-06-29
- * @version 1.0.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-// @matter
 import { NumberTag, PowerSourceTag } from '@matter/node';
 import { DeviceEnergyManagement } from '@matter/types/clusters/device-energy-management';
-// Matterbridge
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 import { deviceEnergyManagement, electricalSensor, powerSource, heatPump, temperatureSensor, thermostatDevice } from '../matterbridgeDeviceTypes.js';
 export class HeatPump extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the HeatPump class.
-     *
-     * @param {string} name - The name of the HeatPump.
-     * @param {string} serial - The serial number of the HeatPump.
-     * @param {number} voltage - The voltage value in millivolts.
-     * @param {number} current - The current value in milliamperes.
-     * @param {number} power - The power value in milliwatts.
-     * @param {number} energyImported - The total production value in mW/h.
-     * @param {number} [absMinPower] - Indicate the minimum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     * @param {number} [absMaxPower] - Indicate the maximum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     *
-     * @remarks
-     * - The HeatPump includes clusters for power source, electrical power measurement, electrical energy measurement, and device energy management.
-     * - It also includes child devices for flow temperature, return temperature, and a thermostat.
-     * - The flow and return temperature sensors are set to default values of 45.00°C and 35.00°C respectively.
-     * - The heating only thermostat is set up with a default temperature setpoint of 21.00°C.
-     * - The device energy management cluster is set to `esaType` as `SpaceHeating`, `esaCanGenerate` as `false`, and `esaState` as `Online`.
-     * - The absolute minimum and maximum power values can be set to indicate the range of power consumption for the heat pump.
-     */
     constructor(name, serial, voltage = null, current = null, power = null, energyImported = null, absMinPower = 0, absMaxPower = 0) {
         super([heatPump, powerSource, electricalSensor, deviceEnergyManagement], {
             tagList: [{ mfgCode: null, namespaceId: PowerSourceTag.Grid.namespaceId, tag: PowerSourceTag.Grid.tag, label: null }],
@@ -61,19 +17,16 @@ export class HeatPump extends MatterbridgeEndpoint {
             .createDefaultDeviceEnergyManagementClusterServer(DeviceEnergyManagement.EsaType.SpaceHeating, false, DeviceEnergyManagement.EsaState.Online, absMinPower, absMaxPower)
             .createDefaultDeviceEnergyManagementModeClusterServer()
             .addRequiredClusterServers();
-        // Add the flow temperature sensor for the heat pump.
         this.addChildDeviceType('FlowTemperature', temperatureSensor, {
             tagList: [{ mfgCode: null, namespaceId: NumberTag.One.namespaceId, tag: NumberTag.One.tag, label: 'Flow' }],
         })
-            .createDefaultTemperatureMeasurementClusterServer(4500) // Default flow temperature setpoint in hundredths of degrees Celsius (45.00°C).
+            .createDefaultTemperatureMeasurementClusterServer(4500)
             .addRequiredClusterServers();
-        // Add the return temperature sensor for the heat pump.
         this.addChildDeviceType('ReturnTemperature', temperatureSensor, {
             tagList: [{ mfgCode: null, namespaceId: NumberTag.Two.namespaceId, tag: NumberTag.Two.tag, label: 'Return' }],
         })
-            .createDefaultTemperatureMeasurementClusterServer(3500) // Default return temperature setpoint in hundredths of degrees Celsius (35.00°C).
+            .createDefaultTemperatureMeasurementClusterServer(3500)
             .addRequiredClusterServers();
-        // Add the global thermostat for the heat pump.
         this.addChildDeviceType('Thermostat', thermostatDevice, {
             tagList: [{ mfgCode: null, namespaceId: NumberTag.One.namespaceId, tag: NumberTag.One.tag, label: 'Main Thermostat' }],
         })
@@ -81,4 +34,3 @@ export class HeatPump extends MatterbridgeEndpoint {
             .addRequiredClusterServers();
     }
 }
-//# sourceMappingURL=heatPump.js.map