matterbridge 3.4.7 → 3.5.0-dev-20260113-29ad318

package/dist/devices/waterHeater.d.ts

@@ -1,26 +1,3 @@
-/**
- * @description This file contains the WaterHeater class.
- * @file src/devices/waterHeater.ts
- * @author Luca Liguori
- * @contributor Ludovic BOUÉ
- * @created 2025-05-18
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { MaybePromise } from '@matter/general';
 import { ModeBase } from '@matter/types/clusters/mode-base';
 import { WaterHeaterManagement } from '@matter/types/clusters/water-heater-management';
@@ -29,29 +6,6 @@ import { WaterHeaterManagementServer } from '@matter/node/behaviors/water-heater
 import { WaterHeaterModeServer } from '@matter/node/behaviors/water-heater-mode';
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 export declare class WaterHeater extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the WaterHeater class.
-     *
-     * @param {string} name - The name of the water heater.
-     * @param {string} serial - The serial number of the water heater.
-     * @param {number} [waterTemperature] - The current water temperature. Defaults to 50.
-     * @param {number} [targetWaterTemperature] - The target water temperature. Defaults to 55.
-     * @param {number} [minHeatSetpointLimit] - The minimum heat setpoint limit. Defaults to 20.
-     * @param {number} [maxHeatSetpointLimit] - The maximum heat setpoint limit. Defaults to 80.
-     * @param {{ immersionElement1?: boolean; immersionElement2?: boolean; heatPump?: boolean; boiler?: boolean; other?: boolean }} [heaterTypes] - Indicates the heat sources that the water heater can call on for heating. Defaults to { immersionElement1: true }.
-     * @param {boolean} heaterTypes.immersionElement1 - Indicates if the water heater has an immersion element 1. Defaults to true.
-     * @param {boolean} heaterTypes.immersionElement2 - Indicates if the water heater has an immersion element 2.
-     * @param {boolean} heaterTypes.heatPump - Indicates if the water heater has a heat pump.
-     * @param {boolean} heaterTypes.boiler - Indicates if the water heater has a boiler.
-     * @param {boolean} heaterTypes.other - Indicates if the water heater has other types of heating sources.
-     * @param {number} [tankPercentage] - The current tank percentage of the WaterHeaterManagement cluster. Defaults to 90.
-     * @param {number} [voltage] - The voltage value in millivolts. Defaults to null if not provided.
-     * @param {number} [current] - The current value in milliamperes. Defaults to null if not provided.
-     * @param {number} [power] - The power value in milliwatts. Defaults to null if not provided.
-     * @param {number} [energy] - The total consumption value in mW/h. Defaults to null if not provided.
-     * @param {number} [absMinPower] - Indicate the minimum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     * @param {number} [absMaxPower] - Indicate the maximum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     */
     constructor(name: string, serial: string, waterTemperature?: number, targetWaterTemperature?: number, minHeatSetpointLimit?: number, maxHeatSetpointLimit?: number, heaterTypes?: {
         immersionElement1?: boolean;
         immersionElement2?: boolean;
@@ -59,25 +13,6 @@ export declare class WaterHeater extends MatterbridgeEndpoint {
         boiler?: boolean;
         other?: boolean;
     }, tankPercentage?: number, voltage?: number | bigint | null, current?: number | bigint | null, power?: number | bigint | null, energy?: number | bigint | null, absMinPower?: number, absMaxPower?: number);
-    /**
-     * Creates a default WaterHeaterManagement Cluster Server.
-     *
-     * @param {{ immersionElement1?: boolean; immersionElement2?: boolean; heatPump?: boolean; boiler?: boolean; other?: boolean }} [heaterTypes] - Indicates the heat sources that the water heater can call on for heating. Defaults to { immersionElement1: true }.
-     * @param {boolean} heaterTypes.immersionElement1 - Indicates if the water heater has an immersion element 1. Defaults to true.
-     * @param {boolean} heaterTypes.immersionElement2 - Indicates if the water heater has an immersion element 2.
-     * @param {boolean} heaterTypes.heatPump - Indicates if the water heater has a heat pump.
-     * @param {boolean} heaterTypes.boiler - Indicates if the water heater has a boiler.
-     * @param {boolean} heaterTypes.other - Indicates if the water heater has other types of heating sources.
-     * @param {{ immersionElement1?: boolean; immersionElement2?: boolean; heatPump?: boolean; boiler?: boolean; other?: boolean }} [heatDemand] - Indicates if the water heater is heating water. Defaults to all heat sources unset.
-     * @param {boolean} heatDemand.immersionElement1 - Indicates if the water heater is heating water with immersion element 1. Defaults to false.
-     * @param {boolean} heatDemand.immersionElement2 - Indicates if the water heater is heating water with immersion element 2.
-     * @param {boolean} heatDemand.heatPump - Indicates if the water heater is heating water with a heat pump.
-     * @param {boolean} heatDemand.boiler - Indicates if the water heater is heating water with a boiler.
-     * @param {boolean} heatDemand.other - Indicates if the water heater is heating water with other types of heating sources.
-     * @param {number} [tankPercentage] - The current tank percentage of the WaterHeaterManagement cluster. Defaults to 100.
-     * @param {WaterHeaterManagement.BoostState} [boostState] - The current boost state of the WaterHeaterManagement cluster. Defaults to Inactive.
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultWaterHeaterManagementClusterServer(heaterTypes?: {
         immersionElement1?: boolean;
         immersionElement2?: boolean;
@@ -91,14 +26,6 @@ export declare class WaterHeater extends MatterbridgeEndpoint {
         boiler?: boolean;
         other?: boolean;
     }, tankPercentage?: number, boostState?: WaterHeaterManagement.BoostState): this;
-    /**
-     * Creates a default WaterHeaterMode Cluster Server.
-     *
-     * @param {number} [currentMode] - The current mode of the WaterHeaterMode cluster. Defaults to mode 1 (WaterHeaterMode.ModeTag.Auto).
-     * @param {WaterHeaterMode.ModeOption[]} [supportedModes] - The supported modes for the WaterHeaterMode cluster. Defaults all cluster modes.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultWaterHeaterModeClusterServer(currentMode?: number, supportedModes?: WaterHeaterMode.ModeOption[]): this;
 }
 export declare class MatterbridgeWaterHeaterManagementServer extends WaterHeaterManagementServer {
@@ -108,4 +35,3 @@ export declare class MatterbridgeWaterHeaterManagementServer extends WaterHeater
 export declare class MatterbridgeWaterHeaterModeServer extends WaterHeaterModeServer {
     changeToMode(request: ModeBase.ChangeToModeRequest): MaybePromise<ModeBase.ChangeToModeResponse>;
 }
-//# sourceMappingURL=waterHeater.d.ts.map

package/dist/devices/waterHeater.js

@@ -1,26 +1,3 @@
-/**
- * @description This file contains the WaterHeater class.
- * @file src/devices/waterHeater.ts
- * @author Luca Liguori
- * @contributor Ludovic BOUÉ
- * @created 2025-05-18
- * @version 1.1.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import { ModeBase } from '@matter/types/clusters/mode-base';
 import { WaterHeaterManagement } from '@matter/types/clusters/water-heater-management';
 import { WaterHeaterMode } from '@matter/types/clusters/water-heater-mode';
@@ -31,29 +8,6 @@ import { MatterbridgeServer } from '../matterbridgeBehaviors.js';
 import { electricalSensor, powerSource, waterHeater } from '../matterbridgeDeviceTypes.js';
 import { MatterbridgeEndpoint } from '../matterbridgeEndpoint.js';
 export class WaterHeater extends MatterbridgeEndpoint {
-    /**
-     * Creates an instance of the WaterHeater class.
-     *
-     * @param {string} name - The name of the water heater.
-     * @param {string} serial - The serial number of the water heater.
-     * @param {number} [waterTemperature] - The current water temperature. Defaults to 50.
-     * @param {number} [targetWaterTemperature] - The target water temperature. Defaults to 55.
-     * @param {number} [minHeatSetpointLimit] - The minimum heat setpoint limit. Defaults to 20.
-     * @param {number} [maxHeatSetpointLimit] - The maximum heat setpoint limit. Defaults to 80.
-     * @param {{ immersionElement1?: boolean; immersionElement2?: boolean; heatPump?: boolean; boiler?: boolean; other?: boolean }} [heaterTypes] - Indicates the heat sources that the water heater can call on for heating. Defaults to { immersionElement1: true }.
-     * @param {boolean} heaterTypes.immersionElement1 - Indicates if the water heater has an immersion element 1. Defaults to true.
-     * @param {boolean} heaterTypes.immersionElement2 - Indicates if the water heater has an immersion element 2.
-     * @param {boolean} heaterTypes.heatPump - Indicates if the water heater has a heat pump.
-     * @param {boolean} heaterTypes.boiler - Indicates if the water heater has a boiler.
-     * @param {boolean} heaterTypes.other - Indicates if the water heater has other types of heating sources.
-     * @param {number} [tankPercentage] - The current tank percentage of the WaterHeaterManagement cluster. Defaults to 90.
-     * @param {number} [voltage] - The voltage value in millivolts. Defaults to null if not provided.
-     * @param {number} [current] - The current value in milliamperes. Defaults to null if not provided.
-     * @param {number} [power] - The power value in milliwatts. Defaults to null if not provided.
-     * @param {number} [energy] - The total consumption value in mW/h. Defaults to null if not provided.
-     * @param {number} [absMinPower] - Indicate the minimum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     * @param {number} [absMaxPower] - Indicate the maximum electrical power in mw that the ESA can consume when switched on. Defaults to `0` if not provided.
-     */
     constructor(name, serial, waterTemperature = 50, targetWaterTemperature = 55, minHeatSetpointLimit = 20, maxHeatSetpointLimit = 80, heaterTypes = { immersionElement1: true }, tankPercentage = 90, voltage = null, current = null, power = null, energy = null, absMinPower = 0, absMaxPower = 0) {
         super([waterHeater, powerSource, electricalSensor], { id: `${name.replaceAll(' ', '')}-${serial.replaceAll(' ', '')}` });
         this.createDefaultIdentifyClusterServer()
@@ -68,42 +22,15 @@ export class WaterHeater extends MatterbridgeEndpoint {
             .createDefaultDeviceEnergyManagementClusterServer(DeviceEnergyManagement.EsaType.WaterHeating, true, DeviceEnergyManagement.EsaState.Online, absMinPower, absMaxPower)
             .createDefaultDeviceEnergyManagementModeClusterServer();
     }
-    /**
-     * Creates a default WaterHeaterManagement Cluster Server.
-     *
-     * @param {{ immersionElement1?: boolean; immersionElement2?: boolean; heatPump?: boolean; boiler?: boolean; other?: boolean }} [heaterTypes] - Indicates the heat sources that the water heater can call on for heating. Defaults to { immersionElement1: true }.
-     * @param {boolean} heaterTypes.immersionElement1 - Indicates if the water heater has an immersion element 1. Defaults to true.
-     * @param {boolean} heaterTypes.immersionElement2 - Indicates if the water heater has an immersion element 2.
-     * @param {boolean} heaterTypes.heatPump - Indicates if the water heater has a heat pump.
-     * @param {boolean} heaterTypes.boiler - Indicates if the water heater has a boiler.
-     * @param {boolean} heaterTypes.other - Indicates if the water heater has other types of heating sources.
-     * @param {{ immersionElement1?: boolean; immersionElement2?: boolean; heatPump?: boolean; boiler?: boolean; other?: boolean }} [heatDemand] - Indicates if the water heater is heating water. Defaults to all heat sources unset.
-     * @param {boolean} heatDemand.immersionElement1 - Indicates if the water heater is heating water with immersion element 1. Defaults to false.
-     * @param {boolean} heatDemand.immersionElement2 - Indicates if the water heater is heating water with immersion element 2.
-     * @param {boolean} heatDemand.heatPump - Indicates if the water heater is heating water with a heat pump.
-     * @param {boolean} heatDemand.boiler - Indicates if the water heater is heating water with a boiler.
-     * @param {boolean} heatDemand.other - Indicates if the water heater is heating water with other types of heating sources.
-     * @param {number} [tankPercentage] - The current tank percentage of the WaterHeaterManagement cluster. Defaults to 100.
-     * @param {WaterHeaterManagement.BoostState} [boostState] - The current boost state of the WaterHeaterManagement cluster. Defaults to Inactive.
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultWaterHeaterManagementClusterServer(heaterTypes, heatDemand, tankPercentage, boostState) {
         this.behaviors.require(MatterbridgeWaterHeaterManagementServer.with(WaterHeaterManagement.Feature.TankPercent), {
-            heaterTypes: heaterTypes ?? { immersionElement1: true }, // Fixed attribute
+            heaterTypes: heaterTypes ?? { immersionElement1: true },
             heatDemand: heatDemand ?? {},
             tankPercentage: tankPercentage ?? 100,
             boostState: boostState ?? WaterHeaterManagement.BoostState.Inactive,
         });
         return this;
     }
-    /**
-     * Creates a default WaterHeaterMode Cluster Server.
-     *
-     * @param {number} [currentMode] - The current mode of the WaterHeaterMode cluster. Defaults to mode 1 (WaterHeaterMode.ModeTag.Auto).
-     * @param {WaterHeaterMode.ModeOption[]} [supportedModes] - The supported modes for the WaterHeaterMode cluster. Defaults all cluster modes.
-     *
-     * @returns {this} The current MatterbridgeEndpoint instance for chaining.
-     */
     createDefaultWaterHeaterModeClusterServer(currentMode, supportedModes) {
         this.behaviors.require(MatterbridgeWaterHeaterModeServer, {
             supportedModes: supportedModes ?? [
@@ -120,7 +47,7 @@ export class WaterHeater extends MatterbridgeEndpoint {
                 { label: 'Off', mode: 11, modeTags: [{ value: WaterHeaterMode.ModeTag.Off }] },
                 { label: 'Manual', mode: 12, modeTags: [{ value: WaterHeaterMode.ModeTag.Manual }] },
                 { label: 'Timed', mode: 13, modeTags: [{ value: WaterHeaterMode.ModeTag.Timed }] },
-            ], // Fixed attribute
+            ],
             currentMode: currentMode ?? 1,
         });
         return this;
@@ -133,9 +60,6 @@ export class MatterbridgeWaterHeaterManagementServer extends WaterHeaterManageme
         device.commandHandler.executeHandler('boost', { request, cluster: WaterHeaterManagementServer.id, attributes: this.state, endpoint: this.endpoint });
         device.log.debug(`MatterbridgeWaterHeaterManagementServer boost called with: ${JSON.stringify(request)}`);
         this.state.boostState = WaterHeaterManagement.BoostState.Active;
-        // The implementation is responsible for setting the device accordingly with the boostInfo of the boost command
-        // super.boost({ boostInfo });
-        // boost is not implemented in matter.js
     }
     cancelBoost() {
         const device = this.endpoint.stateOf(MatterbridgeServer);
@@ -143,9 +67,6 @@ export class MatterbridgeWaterHeaterManagementServer extends WaterHeaterManageme
         device.commandHandler.executeHandler('cancelBoost', { request: {}, cluster: WaterHeaterManagementServer.id, attributes: this.state, endpoint: this.endpoint });
         device.log.debug(`MatterbridgeWaterHeaterManagementServer cancelBoost called`);
         this.state.boostState = WaterHeaterManagement.BoostState.Inactive;
-        // The implementation is responsible for setting the device accordingly with the cancelBoost command
-        // super.cancelBoost();
-        // cancelBoost is not implemented in matter.js
     }
 }
 export class MatterbridgeWaterHeaterModeServer extends WaterHeaterModeServer {
@@ -163,4 +84,3 @@ export class MatterbridgeWaterHeaterModeServer extends WaterHeaterModeServer {
         return { status: ModeBase.ModeChangeStatus.Success, statusText: 'Success' };
     }
 }
-//# sourceMappingURL=waterHeater.js.map

package/dist/dgram/coap.d.ts

@@ -1,141 +1,13 @@
-/**
- * @description This file contains the class Coap.
- * @file src/dgram/coap.ts
- * @author Luca Liguori
- * @created 2025-03-22
- * @version 1.0.0
- * @license Apache-2.0
- *
- * Copyright 2025, 2026, 2027 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
 import dgram from 'node:dgram';
 import { Multicast } from './multicast.js';
-/**
- * Represents a CoAP message.
- *
- * A CoAP message is structured with a fixed header, an optional token, a series of options,
- * and an optional payload. The header consists of version, type, token length, code, and message ID.
- * The token is used to match responses with requests, options provide additional metadata, and
- * the payload carries the message content.
- */
 export interface CoapMessage {
-    /**
-     * The CoAP protocol version.
-     * Typically, this is 1.
-     * (Stored in the top 2 bits of the first header byte.)
-     */
     version: number;
-    /**
-     * The message type.
-     * It indicates whether the message is Confirmable, Non-confirmable, Acknowledgement, or Reset.
-     * (Stored in bits 5-4 of the first header byte.)
-     * 0: Confirmable (CON)
-     * 1: Non-confirmable (NON)
-     * 2: Acknowledgement (ACK)
-     * 3: Reset (RST)
-     */
     type: number;
-    /**
-     * The token length.
-     * This value (0-8) specifies the length of the token field.
-     * (Stored in the lower 4 bits of the first header byte.)
-     */
     tokenLength: number;
-    /**
-     * The message code.
-     * It indicates the method or response code, e.g., GET, POST, or a success/error response.
-     * (Stored in the second header byte.)
-     * CoAP uses an 8‑bit Code field divided into a 3‑bit class and a 5‑bit detail. The code can be represented as X.XX (e.g. 0.01) and is defined in RFC 7252. Here are the standard CoAP codes:
-     * Request Codes (Class 0)
-     * 0.01 – 1-GET
-     * Retrieve a resource.
-     * 0.02 – 2-POST
-     * Create a resource or trigger an action.
-     * 0.03 – 3-PUT
-     * Update or create a resource.
-     * 0.04 – 4-DELETE
-     * Remove a resource.
-     * Success Response Codes (Class 2)
-     * 2.00 – Empty / Success
-     * Indicates an empty message or a successful request with no payload.
-     * 2.01 – Created
-     * The request resulted in a new resource being created.
-     * 2.02 – Deleted
-     * The resource was successfully deleted.
-     * 2.03 – Valid
-     * The response indicates that the resource is still valid (used with caching).
-     * 2.04 – Changed
-     * The resource was successfully modified.
-     * 2.05 – Content
-     * The response contains the requested content.
-     * Client Error Response Codes (Class 4)
-     * 4.00 – Bad Request
-     * The request was malformed.
-     * 4.01 – Unauthorized
-     * The request requires authentication.
-     * 4.02 – Bad Option
-     * An option in the request was not understood or is unacceptable.
-     * 4.03 – Forbidden
-     * The server refuses to fulfill the request.
-     * 4.04 – Not Found
-     * The requested resource was not found.
-     * 4.05 – Method Not Allowed
-     * The request method is not supported for the target resource.
-     * 4.06 – Not Acceptable
-     * The server cannot generate a response matching the list of acceptable values.
-     * 4.12 – Precondition Failed
-     * A precondition given in the request evaluated to false.
-     * 4.13 – Request Entity Too Large
-     * The request payload is too large.
-     * 4.15 – Unsupported Content-Format
-     * The server does not support the content format of the request payload.
-     * Server Error Response Codes (Class 5)
-     * 5.00 – Internal Server Error
-     * The server encountered an unexpected condition.
-     * 5.01 – Not Implemented
-     * The server does not support the requested method.
-     * 5.02 – Bad Gateway
-     * The server, while acting as a gateway or proxy, received an invalid response.
-     * 5.03 – Service Unavailable
-     * The server is currently unable to handle the request.
-     * 5.04 – Gateway Timeout
-     * The server did not receive a timely response from an upstream server.
-     * 5.05 – Proxying Not Supported
-     * The server does not support proxying for the requested resource.
-     */
     code: number;
-    /**
-     * The message identifier.
-     * This 16-bit field is used to match messages of type Acknowledgement/Reset with their corresponding requests.
-     * (Stored in bytes 2-3 of the header.)
-     */
     messageId: number;
-    /**
-     * The token.
-     * A variable-length sequence (0-8 bytes) that helps match a request with its response.
-     */
     token: Buffer;
-    /**
-     * An array of options.
-     * Options carry additional information such as URI path, content format, etc., and are encoded using a delta mechanism.
-     */
     options: CoapOption[];
-    /**
-     * The payload.
-     * The actual content of the message, if present. It follows a payload marker (0xFF) if non-empty.
-     */
     payload?: Buffer;
 }
 interface CoapOption {
@@ -152,54 +24,11 @@ export declare class Coap extends Multicast {
     constructor(name: string, multicastAddress: string, multicastPort: number, socketType: 'udp4' | 'udp6', reuseAddr?: boolean | undefined, interfaceName?: string, interfaceAddress?: string);
     onCoapMessage(message: CoapMessage, rinfo: dgram.RemoteInfo): void;
     onMessage(msg: Buffer, rinfo: dgram.RemoteInfo): void;
-    /**
-     * Decodes a CoAP message from a Buffer.
-     *
-     * @param {Buffer} msg - The Buffer containing the raw CoAP message.
-     * @returns {CoapMessage} A parsed CoAP message object.
-     * @throws {Error} if the message is malformed.
-     */
     decodeCoapMessage(msg: Buffer): CoapMessage;
-    /**
-     * Encodes a CoAP message into a Buffer.
-     *
-     * @param {CoapMessage} msg - The CoAP message to encode.
-     * @returns {Buffer} A Buffer representing the encoded CoAP message.
-     * @throws {Error} if the message is malformed.
-     */
     encodeCoapMessage(msg: CoapMessage): Buffer;
-    /**
-     * Converts a CoAP message type numeric value to its string representation.
-     *
-     * CoAP message types are:
-     *  - 0: Confirmable (CON)
-     *  - 1: Non-confirmable (NON)
-     *  - 2: Acknowledgement (ACK)
-     *  - 3: Reset (RST)
-     *
-     * @param {number} type - The numeric CoAP message type.
-     * @returns {string} The string representation of the message type.
-     */
     coapTypeToString(type: number): string;
-    /**
-     * Converts a CoAP code numeric value to its string representation.
-     *
-     * The CoAP code is split into a 3-bit class and a 5-bit detail.
-     * For example:
-     *   - 0.01: GET
-     *   - 0.02: POST
-     *   - 0.03: PUT
-     *   - 0.04: DELETE
-     *   - 2.05: Content (success response)
-     *   - 4.04: Not Found (client error)
-     *   - 5.00: Internal Server Error (server error)
-     *
-     * @param {number} code - The numeric CoAP code.
-     * @returns {string} The string representation of the code.
-     */
     coapCodeToString(code: number): string;
     sendRequest(messageId: number, options: CoapOption[], payload: Record<string, any> | undefined, token: string | undefined, address: string | undefined, port: number | undefined): void;
     logCoapMessage(msg: CoapMessage): void;
 }
 export {};
-//# sourceMappingURL=coap.d.ts.map