matterbridge 2.0.0-edge1 → 2.1.0-dev.1

package/dist/matterbridgeEndpoint.d.ts

@@ -1,1167 +0,0 @@
-/**
- * This file contains the class MatterbridgeEndpoint that extends the Endpoint class from the Matter.js library.
- *
- * @file matterbridgeEndpoint.ts
- * @author Luca Liguori
- * @date 2024-10-01
- * @version 1.0.0
- *
- * Copyright 2024, 2025, 2026 Luca Liguori.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License. *
- */
-import { AnsiLogger } from 'node-ansi-logger';
-import { MatterbridgeEndpointOptions } from './matterbridgeDeviceTypes.js';
-import { Endpoint, NamedHandler } from '@matter/main';
-import { ClusterId, EndpointNumber, VendorId, AtLeastOne, MakeMandatory } from '@matter/main';
-import { AirQuality, BasicInformation, BooleanState, BooleanStateConfiguration, BridgedDeviceBasicInformation, ColorControl, ConcentrationMeasurement, DeviceEnergyManagement, DoorLock, FanControl, FlowMeasurement, Groups, Identify, IlluminanceMeasurement, LevelControl, ModeSelect, OccupancySensing, OnOff, PowerSource, PressureMeasurement, PumpConfigurationAndControl, RelativeHumidityMeasurement, SmokeCoAlarm, TemperatureMeasurement, Thermostat, ThreadNetworkDiagnostics, TimeSynchronization, ValveConfigurationAndControl, WindowCovering } from '@matter/main/clusters';
-import { ClusterType, Semtag, BitSchema, TypeFromPartialBitSchema, Attributes, Commands, Events, Cluster } from '@matter/main/types';
-import { DeviceTypeDefinition } from '@project-chip/matter.js/device';
-import { ClusterServer, ClusterServerHandlers, ClusterServerObj } from '@project-chip/matter.js/cluster';
-export interface MatterbridgeEndpointCommands {
-    identify: MakeMandatory<ClusterServerHandlers<typeof Identify.Complete>['identify']>;
-    triggerEffect: MakeMandatory<ClusterServerHandlers<typeof Identify.Complete>['triggerEffect']>;
-    on: MakeMandatory<ClusterServerHandlers<typeof OnOff.Complete>['on']>;
-    off: MakeMandatory<ClusterServerHandlers<typeof OnOff.Complete>['off']>;
-    toggle: MakeMandatory<ClusterServerHandlers<typeof OnOff.Complete>['toggle']>;
-    offWithEffect: MakeMandatory<ClusterServerHandlers<typeof OnOff.Complete>['offWithEffect']>;
-    moveToLevel: MakeMandatory<ClusterServerHandlers<typeof LevelControl.Complete>['moveToLevel']>;
-    moveToLevelWithOnOff: MakeMandatory<ClusterServerHandlers<typeof LevelControl.Complete>['moveToLevelWithOnOff']>;
-    moveToColor: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveToColor']>;
-    moveColor: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveColor']>;
-    stepColor: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['stepColor']>;
-    moveToHue: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveToHue']>;
-    moveHue: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveHue']>;
-    stepHue: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['stepHue']>;
-    moveToSaturation: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveToSaturation']>;
-    moveSaturation: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveSaturation']>;
-    stepSaturation: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['stepSaturation']>;
-    moveToHueAndSaturation: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveToHueAndSaturation']>;
-    moveToColorTemperature: MakeMandatory<ClusterServerHandlers<typeof ColorControl.Complete>['moveToColorTemperature']>;
-    upOrOpen: MakeMandatory<ClusterServerHandlers<typeof WindowCovering.Complete>['upOrOpen']>;
-    downOrClose: MakeMandatory<ClusterServerHandlers<typeof WindowCovering.Complete>['downOrClose']>;
-    stopMotion: MakeMandatory<ClusterServerHandlers<typeof WindowCovering.Complete>['stopMotion']>;
-    goToLiftPercentage: MakeMandatory<ClusterServerHandlers<typeof WindowCovering.Complete>['goToLiftPercentage']>;
-    lockDoor: MakeMandatory<ClusterServerHandlers<typeof DoorLock.Complete>['lockDoor']>;
-    unlockDoor: MakeMandatory<ClusterServerHandlers<typeof DoorLock.Complete>['unlockDoor']>;
-    open: MakeMandatory<ClusterServerHandlers<typeof ValveConfigurationAndControl.Complete>['open']>;
-    close: MakeMandatory<ClusterServerHandlers<typeof ValveConfigurationAndControl.Complete>['close']>;
-    setpointRaiseLower: MakeMandatory<ClusterServerHandlers<typeof Thermostat.Complete>['setpointRaiseLower']>;
-    changeToMode: MakeMandatory<ClusterServerHandlers<typeof ModeSelect.Complete>['changeToMode']>;
-    step: MakeMandatory<ClusterServerHandlers<typeof FanControl.Complete>['step']>;
-    suppressAlarm: MakeMandatory<ClusterServerHandlers<typeof BooleanStateConfiguration.Complete>['suppressAlarm']>;
-    enableDisableAlarm: MakeMandatory<ClusterServerHandlers<typeof BooleanStateConfiguration.Complete>['enableDisableAlarm']>;
-    selfTestRequest: MakeMandatory<ClusterServerHandlers<typeof SmokeCoAlarm.Complete>['selfTestRequest']>;
-    resetCounts: MakeMandatory<ClusterServerHandlers<typeof ThreadNetworkDiagnostics.Complete>['resetCounts']>;
-    setUtcTime: MakeMandatory<ClusterServerHandlers<typeof TimeSynchronization.Complete>['setUtcTime']>;
-    setTimeZone: MakeMandatory<ClusterServerHandlers<typeof TimeSynchronization.Complete>['setTimeZone']>;
-    setDstOffset: MakeMandatory<ClusterServerHandlers<typeof TimeSynchronization.Complete>['setDstOffset']>;
-    pauseRequest: MakeMandatory<ClusterServerHandlers<typeof DeviceEnergyManagement.Complete>['pauseRequest']>;
-    resumeRequest: MakeMandatory<ClusterServerHandlers<typeof DeviceEnergyManagement.Complete>['resumeRequest']>;
-}
-export interface SerializedMatterbridgeEndpoint {
-    pluginName: string;
-    deviceName: string;
-    serialNumber: string;
-    uniqueId: string;
-    productId?: number;
-    productName?: string;
-    vendorId?: number;
-    vendorName?: string;
-    deviceTypes: AtLeastOne<DeviceTypeDefinition>;
-    endpoint: EndpointNumber | undefined;
-    endpointName: string;
-    clusterServersId: ClusterId[];
-}
-export declare class MatterbridgeEndpoint extends Endpoint {
-    static bridgeMode: string;
-    static logLevel: any;
-    log: AnsiLogger;
-    plugin: string | undefined;
-    configUrl: string | undefined;
-    deviceName: string | undefined;
-    serialNumber: string | undefined;
-    uniqueId: string | undefined;
-    vendorId: number | undefined;
-    vendorName: string | undefined;
-    productId: number | undefined;
-    productName: string | undefined;
-    softwareVersion: number | undefined;
-    softwareVersionString: string | undefined;
-    hardwareVersion: number | undefined;
-    hardwareVersionString: string | undefined;
-    productUrl: string;
-    name: string | undefined;
-    deviceType: number;
-    uniqueStorageKey: string | undefined;
-    tagList?: Semtag[];
-    subType: string;
-    private readonly deviceTypes;
-    private readonly clusterServers;
-    private readonly clusterClients;
-    readonly commandHandler: NamedHandler<MatterbridgeEndpointCommands>;
-    /**
-     * Represents a MatterbridgeEndpoint.
-     * @constructor
-     * @param {DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>} definition - The DeviceTypeDefinition(s) of the endpoint.
-     * @param {MatterbridgeEndpointOptions} [options={}] - The options for the device.
-     * @param {boolean} [debug=false] - Debug flag.
-     */
-    constructor(definition: DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>, options?: MatterbridgeEndpointOptions, debug?: boolean);
-    /**
-     * Loads an instance of the MatterbridgeEndpoint class.
-     *
-     * @param {DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>} definition - The DeviceTypeDefinition(s) of the device.
-     * @param {MatterbridgeEndpointOptions} [options={}] - The options for the device.
-     * @param {boolean} [debug=false] - Debug flag.
-     * @returns {Promise<MatterbridgeEndpoint>} MatterbridgeEndpoint instance.
-     */
-    static loadInstance(definition: DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>, options?: MatterbridgeEndpointOptions, debug?: boolean): unknown;
-    static getBehaviourTypesFromClusterServerIds(clusterServerList: ClusterId[]): {};
-    static getBehaviourTypesFromClusterClientIds(clusterClientList: ClusterId[]): {};
-    static getBehaviourTypeFromClusterServerId(clusterId: ClusterId, subType?: string): any;
-    static getBehaviourTypeFromClusterClientId(clusterId: ClusterId): any;
-    /**
-     * Adds a device type to the list of device types.
-     * If the device type is not already present in the list, it will be added.
-     *
-     * @param {DeviceTypeDefinition} deviceType - The device type to add.
-     *
-     * @deprecated This method is deprecated and will be removed in future versions. Use the constructor options instead.
-     */
-    addDeviceType(deviceType: DeviceTypeDefinition): void;
-    /**
-     * Adds one or more device types with the required cluster servers and the specified cluster servers.
-     *
-     * @param {AtLeastOne<DeviceTypeDefinition>} deviceTypes - The device types to add.
-     * @param {ClusterId[]} includeServerList - The list of cluster IDs to include.
-     *
-     * @deprecated This method is deprecated and will be removed in future versions. Use the constructor options instead.
-     */
-    addDeviceTypeWithClusterServer(deviceTypes: AtLeastOne<DeviceTypeDefinition>, includeServerList: ClusterId[]): void;
-    /**
-     * Adds the required cluster servers (only if they are not present) for the device types of the specified endpoint.
-     *
-     * @param {MatterbridgeEndpoint} endpoint - The endpoint to add the required cluster servers to.
-     * @returns {MatterbridgeEndpoint} The updated endpoint with the required cluster servers added.
-     */
-    addRequiredClusterServers(endpoint: MatterbridgeEndpoint): MatterbridgeEndpoint;
-    /**
-     * Adds the optional cluster servers (only if they are not present) for the device types of the specified endpoint.
-     *
-     * @param {MatterbridgeEndpoint} endpoint - The endpoint to add the required cluster servers to.
-     * @returns {MatterbridgeEndpoint} The updated endpoint with the required cluster servers added.
-     */
-    addOptionalClusterServers(endpoint: MatterbridgeEndpoint): MatterbridgeEndpoint;
-    /**
-     * Adds a child endpoint with the specified device types and options.
-     * If the child endpoint is not already present, it will be created and added.
-     * If the child endpoint is already present, the device types will be added to the existing child endpoint.
-     *
-     * @param {string} endpointName - The name of the new endpoint to add.
-     * @param {DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>} definition - The device types to add.
-     * @param {MatterbridgeEndpointOptions} [options={}] - The options for the endpoint.
-     * @param {boolean} [debug=false] - Whether to enable debug logging.
-     * @returns {MatterbridgeEndpoint} - The child endpoint that was found or added.
-     *
-     * @example
-     * ```typescript
-     * const endpoint = device.addChildDeviceType('Temperature', [temperatureSensor], { tagList: [{ mfgCode: null, namespaceId: LocationTag.Indoor.namespaceId, tag: LocationTag.Indoor.tag, label: null }] }, true);
-     * ```
-     */
-    addChildDeviceType(endpointName: string, definition: DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>, options?: MatterbridgeEndpointOptions, debug?: boolean): MatterbridgeEndpoint;
-    /**
-     * Adds a child endpoint with one or more device types with the required cluster servers and the specified cluster servers.
-     * If the child endpoint is not already present in the childEndpoints, it will be added.
-     * If the child endpoint is already present in the childEndpoints, the device types and cluster servers will be added to the existing child endpoint.
-     *
-     * @param {string} endpointName - The name of the new enpoint to add.
-     * @param {DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>} definition - The device types to add.
-     * @param {ClusterId[]} [includeServerList=[]] - The list of cluster IDs to include.
-     * @param {MatterbridgeEndpointOptions} [options={}] - The options for the device.
-     * @param {boolean} [debug=false] - Whether to enable debug logging.
-     * @returns {MatterbridgeEndpoint} - The child endpoint that was found or added.
-     *
-     * @example
-     * ```typescript
-     * const endpoint = device.addChildDeviceTypeWithClusterServer('Temperature', [temperatureSensor], [], { tagList: [{ mfgCode: null, namespaceId: LocationTag.Indoor.namespaceId, tag: LocationTag.Indoor.tag, label: null }] }, true);
-     * ```
-     */
-    addChildDeviceTypeWithClusterServer(endpointName: string, definition: DeviceTypeDefinition | AtLeastOne<DeviceTypeDefinition>, includeServerList?: ClusterId[], options?: MatterbridgeEndpointOptions, debug?: boolean): MatterbridgeEndpoint;
-    /**
-     * Retrieves a child endpoint by its name.
-     *
-     * @param {string} endpointName - The name of the endpoint to retrieve.
-     * @returns {Endpoint | undefined} The child endpoint with the specified name, or undefined if not found.
-     */
-    getChildEndpointByName(endpointName: string): MatterbridgeEndpoint | undefined;
-    getChildEndpoint(endpointNumber: EndpointNumber): MatterbridgeEndpoint | undefined;
-    getChildEndpoints(): MatterbridgeEndpoint[];
-    getDeviceTypes(): DeviceTypeDefinition[];
-    /**
-     * Sets the device types.
-     *
-     * @param {AtLeastOne<DeviceTypeDefinition>} deviceTypes - The device types to set.
-     *
-     * @deprecated This method is deprecated and will be removed in future versions.
-     */
-    setDeviceTypes(deviceTypes: AtLeastOne<DeviceTypeDefinition>): void;
-    setBridgedDeviceReachability(reachable: boolean): any;
-    hasClusterServer<F extends BitSchema, SF extends TypeFromPartialBitSchema<F>, A extends Attributes, C extends Commands, E extends Events>(cluster: Cluster<F, SF, A, C, E>): boolean;
-    getClusterServer<const T extends ClusterType>(cluster: T): ClusterServerObj<T> | undefined;
-    getAllClusterServers(): ClusterServer[];
-    getClusterServerById(clusterId: ClusterId): ClusterServerObj | undefined;
-    /**
-     * Add a tagList.
-     *
-     * @deprecated This method is deprecated and will be removed in future versions. Use the constructor options instead.
-     */
-    addTagList(endpoint: Endpoint, mfgCode: VendorId | null, namespaceId: number, tag: number, label?: string | null): void;
-    addClusterServer<const T extends ClusterType>(cluster: ClusterServerObj<T>): void;
-    /**
-     * Adds cluster servers to the specified endpoint based on the provided server list.
-     *
-     * @param {Endpoint} endpoint - The endpoint to add cluster servers to.
-     * @param {ClusterId[]} includeServerList - The list of cluster IDs to include.
-     * @returns void
-     */
-    addClusterServerFromList(endpoint: MatterbridgeEndpoint, includeServerList: ClusterId[]): void;
-    addFixedLabel(label: string, value: string): any;
-    addUserLabel(label: string, value: string): any;
-    private capitalizeFirstLetter;
-    private lowercaseFirstLetter;
-    /**
-     * Retrieves the value of the specified attribute from the given endpoint and cluster.
-     *
-     * @param {ClusterId} clusterId - The ID of the cluster to retrieve the attribute from.
-     * @param {string} attribute - The name of the attribute to retrieve.
-     * @param {AnsiLogger} [log] - Optional logger for error and info messages.
-     * @param {MatterbridgeEndpoint} [endpoint] - Optional the child endpoint to retrieve the attribute from.
-     * @returns {any} The value of the attribute, or undefined if the attribute is not found.
-     */
-    getAttribute(clusterId: ClusterId, attribute: string, log?: AnsiLogger, endpoint?: MatterbridgeEndpoint): any;
-    /**
-     * Sets the value of an attribute on a cluster server endpoint.
-     *
-     * @param {ClusterId} clusterId - The ID of the cluster.
-     * @param {string} attribute - The name of the attribute.
-     * @param {any} value - The value to set for the attribute.
-     * @param {AnsiLogger} [log] - (Optional) The logger to use for logging errors and information.
-     * @param {MatterbridgeEndpoint} [endpoint] - (Optional) The endpoint to set the attribute on. If not provided, the attribute will be set on the current endpoint.
-     * @returns {Promise<boolean>} - A promise that resolves to a boolean indicating whether the attribute was successfully set.
-     */
-    setAttribute(clusterId: ClusterId, attribute: string, value: any, log?: AnsiLogger, endpoint?: MatterbridgeEndpoint): Promise<boolean>;
-    /**
-     * Subscribes to an attribute on a cluster.
-     *
-     * @param {ClusterId} clusterId - The ID of the cluster.
-     * @param {string} attribute - The name of the attribute to subscribe to.
-     * @param {(newValue: any, oldValue: any) => void} listener - A callback function that will be called when the attribute value changes.
-     * @param {AnsiLogger} [log] - Optional logger for logging errors and information.
-     * @param {MatterbridgeEndpoint} [endpoint] - Optional endpoint to subscribe the attribute on. Defaults to the current endpoint.
-     * @returns {boolean} - A boolean indicating whether the subscription was successful.
-     */
-    subscribeAttribute(clusterId: ClusterId, attribute: string, listener: (newValue: any, oldValue: any) => void, log?: AnsiLogger, endpoint?: MatterbridgeEndpoint): Promise<boolean>;
-    /**
-     * Triggers an event on the specified cluster.
-     *
-     * @param {ClusterId} clusterId - The ID of the cluster.
-     * @param {string} event - The name of the event to trigger.
-     * @param {Record<string, boolean | number | bigint | string | object | undefined | null>} payload - The payload to pass to the event.
-     * @param {AnsiLogger} [log] - Optional logger for logging information.
-     * @param {MatterbridgeEndpoint} [endpoint] - Optional endpoint to trigger the event on. Defaults to the current endpoint.
-     * @returns {Promise<boolean>} - A promise that resolves to a boolean indicating whether the event was successfully triggered.
-     */
-    triggerEvent(clusterId: ClusterId, event: string, payload: Record<string, boolean | number | bigint | string | object | undefined | null>, log?: AnsiLogger, endpoint?: MatterbridgeEndpoint): Promise<boolean>;
-    /**
-     * Adds a command handler for the specified command.
-     *
-     * @param {keyof MatterbridgeEndpointCommands} command - The command to add the handler for.
-     * @param {(data: any) => void} handler - The handler function to execute when the command is received.
-     * @returns {void}
-     */
-    addCommandHandler(command: keyof MatterbridgeEndpointCommands, handler: (data: any) => void): void;
-    /**
-     * Serializes the Matterbridge device into a serialized object.
-     *
-     * @param pluginName - The name of the plugin.
-     * @returns The serialized Matterbridge device object.
-     */
-    serialize(): SerializedMatterbridgeEndpoint | undefined;
-    /**
-     * Deserializes the device into a serialized object.
-     *
-     * @returns The deserialized MatterbridgeDevice.
-     */
-    static deserialize(serializedDevice: SerializedMatterbridgeEndpoint): MatterbridgeEndpoint | undefined;
-    /**
-     * From here copy paste from MatterbridgeDevice
-     */
-    /**
-     * Get a default IdentifyCluster server.
-     */
-    getDefaultIdentifyClusterServer(identifyTime?: number, identifyType?: Identify.IdentifyType): ClusterServerObj<Identify.Cluster>;
-    /**
-     * Creates a default IdentifyCluster server.
-     */
-    createDefaultIdentifyClusterServer(identifyTime?: number, identifyType?: Identify.IdentifyType): this;
-    /**
-     * Get a default IdentifyCluster server.
-     */
-    getDefaultGroupsClusterServer(): ClusterServerObj<Groups.Cluster>;
-    /**
-     * Creates a default groups cluster server and adds it to the device.
-     */
-    createDefaultGroupsClusterServer(): this;
-    /**
-     * Get a default scenes cluster server and adds it to the current instance.
-     * @deprecated This method is deprecated.
-     *
-     */
-    getDefaultScenesClusterServer(): void;
-    /**
-     * Creates a default scenes cluster server and adds it to the current instance.
-     * @deprecated This method is deprecated.
-     */
-    createDefaultScenesClusterServer(): this;
-    /**
-     * Creates a unique identifier based on the provided parameters.
-     * @param param1 - The first parameter.
-     * @param param2 - The second parameter.
-     * @param param3 - The third parameter.
-     * @param param4 - The fourth parameter.
-     * @returns A unique identifier generated using the MD5 hash algorithm.
-     */
-    private createUniqueId;
-    /**
-     * Get a default Basic Information Cluster Server.
-     *
-     * @param deviceName - The name of the device.
-     * @param serialNumber - The serial number of the device.
-     * @param vendorId - The vendor ID of the device.
-     * @param vendorName - The vendor name of the device.
-     * @param productId - The product ID of the device.
-     * @param productName - The product name of the device.
-     * @param softwareVersion - The software version of the device. Default is 1.
-     * @param softwareVersionString - The software version string of the device. Default is 'v.1.0.0'.
-     * @param hardwareVersion - The hardware version of the device. Default is 1.
-     * @param hardwareVersionString - The hardware version string of the device. Default is 'v.1.0.0'.
-     */
-    getDefaultBasicInformationClusterServer(deviceName: string, serialNumber: string, vendorId: number, vendorName: string, productId: number, productName: string, softwareVersion?: number, softwareVersionString?: string, hardwareVersion?: number, hardwareVersionString?: string): ClusterServerObj<BasicInformation.Cluster>;
-    /**
-     * Creates a default Basic Information Cluster Server.
-     *
-     * @param deviceName - The name of the device.
-     * @param serialNumber - The serial number of the device.
-     * @param vendorId - The vendor ID of the device.
-     * @param vendorName - The vendor name of the device.
-     * @param productId - The product ID of the device.
-     * @param productName - The product name of the device.
-     * @param softwareVersion - The software version of the device. Default is 1.
-     * @param softwareVersionString - The software version string of the device. Default is 'v.1.0.0'.
-     * @param hardwareVersion - The hardware version of the device. Default is 1.
-     * @param hardwareVersionString - The hardware version string of the device. Default is 'v.1.0.0'.
-     */
-    createDefaultBasicInformationClusterServer(deviceName: string, serialNumber: string, vendorId: number, vendorName: string, productId: number, productName: string, softwareVersion?: number, softwareVersionString?: string, hardwareVersion?: number, hardwareVersionString?: string): this | undefined;
-    /**
-     * Get a default BridgedDeviceBasicInformationClusterServer.
-     *
-     * @param deviceName - The name of the device.
-     * @param serialNumber - The serial number of the device.
-     * @param vendorId - The vendor ID of the device.
-     * @param vendorName - The name of the vendor.
-     * @param productName - The name of the product.
-     * @param softwareVersion - The software version of the device. Default is 1.
-     * @param softwareVersionString - The software version string of the device. Default is 'v.1.0.0'.
-     * @param hardwareVersion - The hardware version of the device. Default is 1.
-     * @param hardwareVersionString - The hardware version string of the device. Default is 'v.1.0.0'.
-     */
-    getDefaultBridgedDeviceBasicInformationClusterServer(deviceName: string, serialNumber: string, vendorId: number, vendorName: string, productName: string, softwareVersion?: number, softwareVersionString?: string, hardwareVersion?: number, hardwareVersionString?: string): ClusterServerObj<BridgedDeviceBasicInformation.Cluster>;
-    /**
-     * Creates a default BridgedDeviceBasicInformationClusterServer.
-     *
-     * @param deviceName - The name of the device.
-     * @param serialNumber - The serial number of the device.
-     * @param vendorId - The vendor ID of the device.
-     * @param vendorName - The name of the vendor.
-     * @param productName - The name of the product.
-     * @param softwareVersion - The software version of the device. Default is 1.
-     * @param softwareVersionString - The software version string of the device. Default is 'v.1.0.0'.
-     * @param hardwareVersion - The hardware version of the device. Default is 1.
-     * @param hardwareVersionString - The hardware version string of the device. Default is 'v.1.0.0'.
-     */
-    createDefaultBridgedDeviceBasicInformationClusterServer(deviceName: string, serialNumber: string, vendorId: number, vendorName: string, productName: string, softwareVersion?: number, softwareVersionString?: string, hardwareVersion?: number, hardwareVersionString?: string): this;
-    /**
-     * Get a default Power Topology Cluster Server. Only needed for an electricalSensor device type.
-     *
-     * @returns {ClusterServer} - The configured Power Topology Cluster Server.
-     */
-    getDefaultPowerTopologyClusterServer(): ClusterServerObj<any>;
-    /**
-     * Get a default Electrical Energy Measurement Cluster Server.
-     *
-     * @param {number} energy - The total consumption value in mW/h.
-     * @returns {ClusterServer} - The configured Electrical Energy Measurement Cluster Server.
-     */
-    getDefaultElectricalEnergyMeasurementClusterServer(energy?: number | bigint | null): ClusterServerObj<any>;
-    /**
-     * Get a default Electrical Power Measurement Cluster Server.
-     *
-     * @param {number} voltage - The voltage value in millivolts.
-     * @param {number} current - The current value in milliamperes.
-     * @param {number} power - The power value in milliwatts.
-     * @param {number} frequency - The frequency value in millihertz.
-     * @returns {ClusterServer} - The configured Electrical Power Measurement Cluster Server.
-     */
-    getDefaultElectricalPowerMeasurementClusterServer(voltage?: number | bigint | null, current?: number | bigint | null, power?: number | bigint | null, frequency?: number | bigint | null): ClusterServerObj<any>;
-    /**
-     * Get a default OnOff cluster server for light devices.
-     *
-     * @param {boolean} [onOff=false] - The initial state of the OnOff cluster.
-     * @param {boolean} [globalSceneControl=false] - The global scene control state.
-     * @param {number} [onTime=0] - The on time value.
-     * @param {number} [offWaitTime=0] - The off wait time value.
-     * @param {OnOff.StartUpOnOff | null} [startUpOnOff=null] - The start-up OnOff state. Null means previous state.
-     * @returns {ClusterServer} - The configured OnOff cluster server.
-     */
-    getDefaultOnOffClusterServer(onOff?: boolean, globalSceneControl?: boolean, onTime?: number, offWaitTime?: number, startUpOnOff?: OnOff.StartUpOnOff | null): ClusterServerObj<any>;
-    /**
-     * Creates a default OnOff cluster server for light devices.
-     *
-     * @param {boolean} [onOff=false] - The initial state of the OnOff cluster.
-     * @param {boolean} [globalSceneControl=false] - The global scene control state.
-     * @param {number} [onTime=0] - The on time value.
-     * @param {number} [offWaitTime=0] - The off wait time value.
-     * @param {OnOff.StartUpOnOff | null} [startUpOnOff=null] - The start-up OnOff state. Null means previous state.
-     * @returns {void}
-     */
-    createDefaultOnOffClusterServer(onOff?: boolean, globalSceneControl?: boolean, onTime?: number, offWaitTime?: number, startUpOnOff?: OnOff.StartUpOnOff | null): this;
-    /**
-     * Get an OnOff cluster server without features.
-     *
-     * @param {boolean} [onOff=false] - The initial state of the OnOff cluster.
-     *
-     * @returns {ClusterServer} - The configured OnOff cluster server.
-     */
-    getOnOffClusterServer(onOff?: boolean): ClusterServerObj<ClusterType>;
-    /**
-     * Creates an OnOff cluster server without features.
-     *
-     * @param {boolean} [onOff=false] - The initial state of the OnOff cluster.
-     */
-    createOnOffClusterServer(onOff?: boolean): this;
-    /**
-     * Get a DeadFront OnOff cluster server.
-     *
-     * @param {boolean} [onOff=false] - The initial state of the OnOff cluster.
-     *
-     * @returns {ClusterServer} - The configured OnOff cluster server.
-     */
-    getDeadFrontOnOffClusterServer(onOff?: boolean): ClusterServerObj<any>;
-    /**
-     * Creates a DeadFront OnOff cluster server.
-     *
-     * @param {boolean} [onOff=false] - The initial state of the OnOff cluster.
-     */
-    createDeadFrontOnOffClusterServer(onOff?: boolean): this;
-    /**
-     * Get a default level control cluster server.
-     *
-     * @param currentLevel - The current level (default: 254).
-     * @param minLevel - The minimum level (default: 1).
-     * @param maxLevel - The maximum level (default: 254).
-     * @param onLevel - The on level (default: null).
-     * @param startUpCurrentLevel - The startUp on level (default: null).
-     */
-    getDefaultLevelControlClusterServer(currentLevel?: number, minLevel?: number, maxLevel?: number, onLevel?: number | null, startUpCurrentLevel?: number | null): ClusterServerObj<any>;
-    /**
-     * Creates a default level control cluster server.
-     *
-     * @param currentLevel - The current level (default: 254).
-     * @param minLevel - The minimum level (default: 1).
-     * @param maxLevel - The maximum level (default: 254).
-     * @param onLevel - The on level (default: null).
-     * @param startUpCurrentLevel - The startUp on level (default: null).
-     */
-    createDefaultLevelControlClusterServer(currentLevel?: number, minLevel?: number, maxLevel?: number, onLevel?: number | null, startUpCurrentLevel?: number | null): this;
-    /**
-     * Get a default color control cluster server with Xy, HueSaturation and ColorTemperature.
-     *
-     * @param currentX - The current X value.
-     * @param currentY - The current Y value.
-     * @param currentHue - The current hue value.
-     * @param currentSaturation - The current saturation value.
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    getDefaultColorControlClusterServer(currentX?: number, currentY?: number, currentHue?: number, currentSaturation?: number, colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): ClusterServerObj<any>;
-    /**
-     * Creates a default color control cluster server with Xy, HueSaturation and ColorTemperature.
-     *
-     * @param currentX - The current X value.
-     * @param currentY - The current Y value.
-     * @param currentHue - The current hue value.
-     * @param currentSaturation - The current saturation value.
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    createDefaultColorControlClusterServer(currentX?: number, currentY?: number, currentHue?: number, currentSaturation?: number, colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): this;
-    /**
-     * Get a Xy color control cluster server with Xy and ColorTemperature.
-     *
-     * @param currentX - The current X value.
-     * @param currentY - The current Y value.
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    getXyColorControlClusterServer(currentX?: number, currentY?: number, colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): ClusterServerObj<any>;
-    /**
-     * Creates a Xy color control cluster server with Xy and ColorTemperature.
-     *
-     * @param currentX - The current X value.
-     * @param currentY - The current Y value.
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    createXyColorControlClusterServer(currentX?: number, currentY?: number, colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): this;
-    /**
-     * Get a default hue and saturation control cluster server with HueSaturation and ColorTemperature.
-     *
-     * @param currentHue - The current hue value.
-     * @param currentSaturation - The current saturation value.
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    getHsColorControlClusterServer(currentHue?: number, currentSaturation?: number, colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): ClusterServerObj<any>;
-    /**
-     * Creates a hue and saturation color control cluster server with HueSaturation and ColorTemperature.
-     *
-     * @param currentHue - The current hue value.
-     * @param currentSaturation - The current saturation value.
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    createHsColorControlClusterServer(currentHue?: number, currentSaturation?: number, colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): this;
-    /**
-     * Get a color temperature color control cluster server.
-     *
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    getCtColorControlClusterServer(colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): ClusterServerObj<any>;
-    /**
-     * Creates a color temperature color control cluster server.
-     *
-     * @param colorTemperatureMireds - The color temperature in mireds.
-     * @param colorTempPhysicalMinMireds - The physical minimum color temperature in mireds.
-     * @param colorTempPhysicalMaxMireds - The physical maximum color temperature in mireds.
-     */
-    createCtColorControlClusterServer(colorTemperatureMireds?: number, colorTempPhysicalMinMireds?: number, colorTempPhysicalMaxMireds?: number): this;
-    private isColorControlConfigured;
-    /**
-     * Configures the color control cluster for a device.
-     *
-     * @remark This method must be called only after creating the cluster with getDefaultColorControlClusterServer or createDefaultColorControlClusterServer
-     * and before starting the matter node.
-     *
-     * @deprecated Use configureColorControlMode instead.
-     *
-     * @param {boolean} hueSaturation - A boolean indicating whether the device supports hue and saturation control.
-     * @param {boolean} xy - A boolean indicating whether the device supports XY control.
-     * @param {boolean} colorTemperature - A boolean indicating whether the device supports color temperature control.
-     * @param {ColorControl.ColorMode} colorMode - An optional parameter specifying the color mode of the device.
-     * @param {Endpoint} endpoint - An optional parameter specifying the endpoint to configure. If not provided, the device endpoint will be used.
-     */
-    configureColorControlCluster(hueSaturation: boolean, xy: boolean, colorTemperature: boolean, colorMode?: ColorControl.ColorMode, endpoint?: MatterbridgeEndpoint): unknown;
-    /**
-     * Configures the color control mode for the device.
-     *
-     * @param {ColorControl.ColorMode} colorMode - The color mode to set.
-     * @param {Endpoint} endpoint - The optional endpoint to configure. If not provided, the method will configure the current endpoint.
-     */
-    configureColorControlMode(colorMode: ColorControl.ColorMode, endpoint?: MatterbridgeEndpoint): unknown;
-    /**
-     * Get a default window covering cluster server.
-     *
-     * @param positionPercent100ths - The position percentage in 100ths (0-10000). Defaults to 0. Matter uses 10000 = fully closed 0 = fully opened.
-     */
-    getDefaultWindowCoveringClusterServer(positionPercent100ths?: number): ClusterServerObj<any>;
-    /**
-     * Creates a default window covering cluster server.
-     *
-     * @param positionPercent100ths - The position percentage in 100ths (0-10000). Defaults to 0. Matter uses 10000 = fully closed 0 = fully opened.
-     */
-    createDefaultWindowCoveringClusterServer(positionPercent100ths?: number): void;
-    /**
-     * Sets the window covering target position as the current position and stops the movement.
-     * @param {Endpoint} endpoint - The endpoint on which to set the window covering (default the device endpoint).
-     */
-    setWindowCoveringTargetAsCurrentAndStopped(endpoint?: MatterbridgeEndpoint): any;
-    /**
-     * Sets the current and target status of a window covering.
-     * @param {number} current - The current position of the window covering.
-     * @param {number} target - The target position of the window covering.
-     * @param {WindowCovering.MovementStatus} status - The movement status of the window covering.
-     * @param {Endpoint} endpoint - The endpoint on which to set the window covering (default the device endpoint).
-     */
-    setWindowCoveringCurrentTargetStatus(current: number, target: number, status: WindowCovering.MovementStatus, endpoint?: MatterbridgeEndpoint): any;
-    /**
-     * Sets the status of the window covering.
-     * @param {WindowCovering.MovementStatus} status - The movement status to set.
-     * @param {Endpoint} endpoint - The endpoint on which to set the window covering (default the device endpoint).
-     */
-    setWindowCoveringStatus(status: WindowCovering.MovementStatus, endpoint?: MatterbridgeEndpoint): any;
-    /**
-     * Retrieves the status of the window covering.
-     * @param {Endpoint} endpoint - The endpoint on which to get the window covering (default the device endpoint).
-     *
-     * @returns The global operational status of the window covering.
-     */
-    getWindowCoveringStatus(endpoint?: MatterbridgeEndpoint): WindowCovering.MovementStatus | undefined;
-    /**
-     * Sets the target and current position of the window covering.
-     *
-     * @param position - The position to set, specified as a number.
-     * @param {Endpoint} endpoint - The endpoint on which to set the window covering (default the device endpoint).
-     */
-    setWindowCoveringTargetAndCurrentPosition(position: number, endpoint?: MatterbridgeEndpoint): any;
-    /**
-     * Get a default door lock cluster server.
-     *
-     * @remarks
-     * This method adds a cluster server for a door lock cluster with default settings.
-     *
-     */
-    getDefaultDoorLockClusterServer(lockState?: DoorLock.LockState, lockType?: DoorLock.LockType): ClusterServerObj<ClusterType>;
-    /**
-     * Creates a default door lock cluster server.
-     *
-     * @remarks
-     * This method adds a cluster server for a door lock cluster with default settings.
-     *
-     */
-    createDefaultDoorLockClusterServer(lockState?: DoorLock.LockState, lockType?: DoorLock.LockType): void;
-    /**
-     * Get a default momentary switch cluster server.
-     *
-     * @remarks
-     * This method adds a cluster server with default momentary switch features and configurations suitable for (AppleHome) Single Double Long automations.
-     */
-    getDefaultSwitchClusterServer(): ClusterServerObj<any>;
-    /**
-     * Creates a default momentary switch cluster server.
-     *
-     * @remarks
-     * This method adds a cluster server with default momentary switch features and configurations.
-     */
-    createDefaultSwitchClusterServer(): void;
-    /**
-     * Get a default latching switch cluster server.
-     *
-     * @remarks
-     * This method adds a cluster server with default latching switch features and configuration.
-     */
-    getDefaultLatchingSwitchClusterServer(): ClusterServerObj<any>;
-    /**
-     * Creates a default latching switch cluster server.
-     *
-     * @remarks
-     * This method adds a cluster server with default latching switch features and configuration.
-     */
-    createDefaultLatchingSwitchClusterServer(): void;
-    /**
-     * Triggers a switch event on the specified endpoint.
-     *
-     * @param {string} event - The type of event to trigger. Possible values are 'Single', 'Double', 'Long' for momentarySwitch and 'Press', 'Release' for latchingSwitch.
-     * @param {Endpoint} endpoint - The endpoint on which to trigger the event (default the device endpoint).
-     * @returns {void}
-     */
-    triggerSwitchEvent(event: 'Single' | 'Double' | 'Long' | 'Press' | 'Release', log?: AnsiLogger, endpoint?: MatterbridgeEndpoint): Promise<boolean>;
-    /**
-     * Retrieves the default mode select cluster server.
-     *
-     * @param description - The description of the cluster server.
-     * @param supportedModes - The supported modes for the cluster server.
-     * @param currentMode - The current mode of the cluster server. Defaults to 0.
-     * @param startUpMode - The startup mode of the cluster server. Defaults to 0.
-     * @returns The default mode select cluster server.
-     */
-    getDefaultModeSelectClusterServer(description: string, supportedModes: ModeSelect.ModeOption[], currentMode?: number, startUpMode?: number): ClusterServerObj<ModeSelect.Cluster>;
-    /**
-     * Creates a default mode select cluster server.
-     *
-     * @param description - The description of the cluster server.
-     * @param supportedModes - The supported modes for the cluster server.
-     * @param currentMode - The current mode of the cluster server. Defaults to 0.
-     * @param startUpMode - The startup mode of the cluster server. Defaults to 0.
-     * @param endpoint - The endpoint to add the cluster server to. Defaults to `this` if not provided.
-     *
-     */
-    createDefaultModeSelectClusterServer(description: string, supportedModes: ModeSelect.ModeOption[], currentMode?: number, startUpMode?: number, endpoint?: MatterbridgeEndpoint): void;
-    /**
-     * Get a default occupancy sensing cluster server.
-     *
-     * @param occupied - A boolean indicating whether the occupancy is occupied or not. Default is false.
-     */
-    getDefaultOccupancySensingClusterServer(occupied?: boolean): ClusterServerObj<OccupancySensing.Cluster>;
-    /**
-     * Creates a default occupancy sensing cluster server.
-     *
-     * @param occupied - A boolean indicating whether the occupancy is occupied or not. Default is false.
-     */
-    createDefaultOccupancySensingClusterServer(occupied?: boolean): void;
-    /**
-     * Get a default Illuminance Measurement Cluster Server.
-     *
-     * @param measuredValue - The measured value of illuminance.
-     */
-    getDefaultIlluminanceMeasurementClusterServer(measuredValue?: number): ClusterServerObj<IlluminanceMeasurement.Cluster>;
-    /**
-     * Creates a default Illuminance Measurement Cluster Server.
-     *
-     * @param measuredValue - The measured value of illuminance.
-     */
-    createDefaultIlluminanceMeasurementClusterServer(measuredValue?: number): void;
-    /**
-     * Get a default flow measurement cluster server.
-     *
-     * @param measuredValue - The measured value of the flow in 10 x m/h.
-     */
-    getDefaultFlowMeasurementClusterServer(measuredValue?: number): ClusterServerObj<FlowMeasurement.Cluster>;
-    /**
-     * Creates a default flow measurement cluster server.
-     *
-     * @param measuredValue - The measured value of the flow in 10 x m/h.
-     */
-    createDefaultFlowMeasurementClusterServer(measuredValue?: number): void;
-    /**
-     * Get a default temperature measurement cluster server.
-     *
-     * @param measuredValue - The measured value of the temperature x 100.
-     */
-    getDefaultTemperatureMeasurementClusterServer(measuredValue?: number): ClusterServerObj<TemperatureMeasurement.Cluster>;
-    /**
-     * Creates a default temperature measurement cluster server.
-     *
-     * @param measuredValue - The measured value of the temperature x 100.
-     */
-    createDefaultTemperatureMeasurementClusterServer(measuredValue?: number): void;
-    /**
-     * Get a default RelativeHumidityMeasurementCluster server.
-     *
-     * @param measuredValue - The measured value of the relative humidity x 100.
-     */
-    getDefaultRelativeHumidityMeasurementClusterServer(measuredValue?: number): ClusterServerObj<RelativeHumidityMeasurement.Cluster>;
-    /**
-     * Creates a default RelativeHumidityMeasurementCluster server.
-     *
-     * @param measuredValue - The measured value of the relative humidity x 100.
-     */
-    createDefaultRelativeHumidityMeasurementClusterServer(measuredValue?: number): void;
-    /**
-     * Get a default Pressure Measurement Cluster Server.
-     *
-     * @param measuredValue - The measured value for the pressure.
-     */
-    getDefaultPressureMeasurementClusterServer(measuredValue?: number): ClusterServerObj<PressureMeasurement.Cluster>;
-    /**
-     * Creates a default Pressure Measurement Cluster Server.
-     *
-     * @param measuredValue - The measured value for the pressure.
-     */
-    createDefaultPressureMeasurementClusterServer(measuredValue?: number): void;
-    /**
-     * Get a default boolean state cluster server.
-     *
-     * @param contact - Optional boolean value indicating the contact state. Defaults to `true` if not provided.
-     */
-    getDefaultBooleanStateClusterServer(contact?: boolean): ClusterServerObj<BooleanState.Cluster>;
-    /**
-     * Creates a default boolean state configuration cluster server.
-     *
-     * @param contact - Optional boolean value indicating the contact state. Defaults to `true` if not provided.
-     */
-    createDefaultBooleanStateClusterServer(contact?: boolean): void;
-    /**
-     * Get a default boolean state configuration cluster server.
-     *
-     * @param contact - Optional boolean value indicating the sensor fault state. Defaults to `false` if not provided.
-     */
-    getDefaultBooleanStateConfigurationClusterServer(sensorFault?: boolean): ClusterServerObj<any>;
-    /**
-     * Creates a default boolean state configuration cluster server.
-     *
-     * @param contact - Optional boolean value indicating the sensor fault state. Defaults to `false` if not provided.
-     */
-    createDefaultBooleanStateConfigurationClusterServer(sensorFault?: boolean): void;
-    /**
-     * Get a default power source replaceable battery cluster server.
-     *
-     * @param batPercentRemaining - The remaining battery percentage (default: 100).
-     * @param batChargeLevel - The battery charge level (default: PowerSource.BatChargeLevel.Ok).
-     * @param batVoltage - The battery voltage (default: 1500).
-     * @param batReplacementDescription - The battery replacement description (default: 'Battery type').
-     * @param batQuantity - The battery quantity (default: 1).
-     */
-    getDefaultPowerSourceReplaceableBatteryClusterServer(batPercentRemaining?: number, batChargeLevel?: PowerSource.BatChargeLevel, batVoltage?: number, batReplacementDescription?: string, batQuantity?: number): ClusterServerObj<any>;
-    /**
-     * Creates a default power source replaceable battery cluster server.
-     *
-     * @param batPercentRemaining - The remaining battery percentage (default: 100).
-     * @param batChargeLevel - The battery charge level (default: PowerSource.BatChargeLevel.Ok).
-     * @param batVoltage - The battery voltage (default: 1500).
-     * @param batReplacementDescription - The battery replacement description (default: 'Battery type').
-     * @param batQuantity - The battery quantity (default: 1).
-     */
-    createDefaultPowerSourceReplaceableBatteryClusterServer(batPercentRemaining?: number, batChargeLevel?: PowerSource.BatChargeLevel, batVoltage?: number, batReplacementDescription?: string, batQuantity?: number): void;
-    /**
-     * Get a default power source rechargeable battery cluster server.
-     *
-     * @param batPercentRemaining - The remaining battery percentage (default: 100).
-     * @param batChargeLevel - The battery charge level (default: PowerSource.BatChargeLevel.Ok).
-     * @param batVoltage - The battery voltage (default: 1500).
-     */
-    getDefaultPowerSourceRechargeableBatteryClusterServer(batPercentRemaining?: number, batChargeLevel?: PowerSource.BatChargeLevel, batVoltage?: number): ClusterServerObj<any>;
-    /**
-     * Creates a default power source rechargeable battery cluster server.
-     *
-     * @param batPercentRemaining - The remaining battery percentage (default: 100).
-     * @param batChargeLevel - The battery charge level (default: PowerSource.BatChargeLevel.Ok).
-     * @param batVoltage - The battery voltage (default: 1500).
-     */
-    createDefaultPowerSourceRechargeableBatteryClusterServer(batPercentRemaining?: number, batChargeLevel?: PowerSource.BatChargeLevel, batVoltage?: number): void;
-    /**
-     * Get a default power source wired cluster server.
-     *
-     * @param wiredCurrentType - The type of wired current (default: PowerSource.WiredCurrentType.Ac)
-     */
-    getDefaultPowerSourceWiredClusterServer(wiredCurrentType?: PowerSource.WiredCurrentType): ClusterServerObj<any>;
-    /**
-     * Creates a default power source wired cluster server.
-     *
-     * @param wiredCurrentType - The type of wired current (default: PowerSource.WiredCurrentType.Ac)
-     */
-    createDefaultPowerSourceWiredClusterServer(wiredCurrentType?: PowerSource.WiredCurrentType): void;
-    /**
-     * @deprecated This function is deprecated by Matter 1.3 spec and will be removed in a future version.
-     */
-    createDefaultPowerSourceConfigurationClusterServer(endpointNumber?: number): void;
-    /**
-     * Get a default air quality cluster server.
-     *
-     * @param airQuality The air quality type. Defaults to `AirQuality.AirQualityType.Unknown`.
-     */
-    getDefaultAirQualityClusterServer(airQuality?: AirQuality.AirQualityEnum): ClusterServerObj<any>;
-    /**
-     * Creates a default air quality cluster server.
-     *
-     * @param airQuality The air quality type. Defaults to `AirQuality.AirQualityType.Unknown`.
-     */
-    createDefaultAirQualityClusterServer(airQuality?: AirQuality.AirQualityEnum): void;
-    /**
-     * Get a default TVOC measurement cluster server.
-     *
-     * @param measuredValue - The measured value for TVOC.
-     */
-    getDefaultTvocMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Creates a default TVOC measurement cluster server.
-     *
-     * @param measuredValue - The measured value for TVOC.
-     */
-    createDefaultTvocMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Get a default heating thermostat cluster server with the specified parameters.
-     * @param {number} [localTemperature] - The local temperature value in degrees Celsius. Defaults to 23°.
-     * @param {number} [occupiedHeatingSetpoint] - The occupied heating setpoint value in degrees Celsius. Defaults to 21°.
-     * @param {number} [minHeatSetpointLimit] - The minimum heat setpoint limit value. Defaults to 0°.
-     * @param {number} [maxHeatSetpointLimit] - The maximum heat setpoint limit value. Defaults to 50°.
-     * @returns {ThermostatClusterServer} A default thermostat cluster server configured with the specified parameters.
-     */
-    getDefaultHeatingThermostatClusterServer(localTemperature?: number, occupiedHeatingSetpoint?: number, minHeatSetpointLimit?: number, maxHeatSetpointLimit?: number): ClusterServerObj<any>;
-    /**
-     * Creates and adds a default heating thermostat cluster server to the device.
-     *
-     * @param {number} [localTemperature] - The local temperature value in degrees Celsius. Defaults to 23°.
-     * @param {number} [occupiedHeatingSetpoint] - The occupied heating setpoint value in degrees Celsius. Defaults to 21°.
-     * @param {number} [minHeatSetpointLimit] - The minimum heat setpoint limit value. Defaults to 0°.
-     * @param {number} [maxHeatSetpointLimit] - The maximum heat setpoint limit value. Defaults to 50°.
-     */
-    createDefaultHeatingThermostatClusterServer(localTemperature?: number, occupiedHeatingSetpoint?: number, minHeatSetpointLimit?: number, maxHeatSetpointLimit?: number): void;
-    /**
-     * Get a default cooling thermostat cluster server with the specified parameters.
-     * @param {number} [localTemperature] - The local temperature value in degrees Celsius. Defaults to 23°.
-     * @param {number} [occupiedCoolingSetpoint] - The occupied cooling setpoint value in degrees Celsius. Defaults to 25°.
-     * @param {number} [minCoolSetpointLimit] - The minimum cool setpoint limit value. Defaults to 0°.
-     * @param {number} [maxCoolSetpointLimit] - The maximum cool setpoint limit value. Defaults to 50°.
-     * @returns {ThermostatClusterServer} A default thermostat cluster server configured with the specified parameters.
-     */
-    getDefaultCoolingThermostatClusterServer(localTemperature?: number, occupiedCoolingSetpoint?: number, minCoolSetpointLimit?: number, maxCoolSetpointLimit?: number): ClusterServerObj<any>;
-    /**
-     * Creates and adds a default cooling thermostat cluster server to the device.
-     *
-     * @param {number} [localTemperature] - The local temperature value in degrees Celsius. Defaults to 23°.
-     * @param {number} [occupiedCoolingSetpoint] - The occupied cooling setpoint value in degrees Celsius. Defaults to 25°.
-     * @param {number} [minCoolSetpointLimit] - The minimum cool setpoint limit value. Defaults to 0°.
-     * @param {number} [maxCoolSetpointLimit] - The maximum cool setpoint limit value. Defaults to 50°.
-     */
-    createDefaultCoolingThermostatClusterServer(localTemperature?: number, occupiedCoolingSetpoint?: number, minCoolSetpointLimit?: number, maxCoolSetpointLimit?: number): void;
-    /**
-     * Get a default thermostat cluster server with the specified parameters.
-     *
-     * @param {number} [localTemperature=23] - The local temperature value in degrees Celsius. Defaults to 23°.
-     * @param {number} [occupiedHeatingSetpoint=21] - The occupied heating setpoint value in degrees Celsius. Defaults to 21°.
-     * @param {number} [occupiedCoolingSetpoint=25] - The occupied cooling setpoint value in degrees Celsius. Defaults to 25°.
-     * @param {number} [minSetpointDeadBand=1] - The minimum setpoint dead band value. Defaults to 1°.
-     * @param {number} [minHeatSetpointLimit=0] - The minimum heat setpoint limit value. Defaults to 0°.
-     * @param {number} [maxHeatSetpointLimit=50] - The maximum heat setpoint limit value. Defaults to 50°.
-     * @param {number} [minCoolSetpointLimit=0] - The minimum cool setpoint limit value. Defaults to 0°.
-     * @param {number} [maxCoolSetpointLimit=50] - The maximum cool setpoint limit value. Defaults to 50°.
-     * @returns {ThermostatClusterServer} A default thermostat cluster server configured with the specified parameters.
-     */
-    getDefaultThermostatClusterServer(localTemperature?: number, occupiedHeatingSetpoint?: number, occupiedCoolingSetpoint?: number, minSetpointDeadBand?: number, minHeatSetpointLimit?: number, maxHeatSetpointLimit?: number, minCoolSetpointLimit?: number, maxCoolSetpointLimit?: number): ClusterServerObj<any>;
-    /**
-     * Creates and adds a default thermostat cluster server to the device.
-     *
-     * @param {number} [localTemperature=23] - The local temperature value in degrees Celsius. Defaults to 23°.
-     * @param {number} [occupiedHeatingSetpoint=21] - The occupied heating setpoint value in degrees Celsius. Defaults to 21°.
-     * @param {number} [occupiedCoolingSetpoint=25] - The occupied cooling setpoint value in degrees Celsius. Defaults to 25°.
-     * @param {number} [minSetpointDeadBand=1] - The minimum setpoint dead band value. Defaults to 1°.
-     * @param {number} [minHeatSetpointLimit=0] - The minimum heat setpoint limit value. Defaults to 0°.
-     * @param {number} [maxHeatSetpointLimit=50] - The maximum heat setpoint limit value. Defaults to 50°.
-     * @param {number} [minCoolSetpointLimit=0] - The minimum cool setpoint limit value. Defaults to 0°.
-     * @param {number} [maxCoolSetpointLimit=50] - The maximum cool setpoint limit value. Defaults to 50°.
-     */
-    createDefaultThermostatClusterServer(localTemperature?: number, occupiedHeatingSetpoint?: number, occupiedCoolingSetpoint?: number, minSetpointDeadBand?: number, minHeatSetpointLimit?: number, maxHeatSetpointLimit?: number, minCoolSetpointLimit?: number, maxCoolSetpointLimit?: number): void;
-    /**
-     * Returns the default SmokeCOAlarm Cluster Server.
-     *
-     * @param smokeState - The state of the smoke alarm. Defaults to SmokeCoAlarm.AlarmState.Normal.
-     * @param coState - The state of the CO alarm. Defaults to SmokeCoAlarm.AlarmState.Normal.
-     * @returns The default SmokeCOAlarmClusterServer.
-     */
-    getDefaultSmokeCOAlarmClusterServer(smokeState?: SmokeCoAlarm.AlarmState, coState?: SmokeCoAlarm.AlarmState): ClusterServerObj<any>;
-    /**
-     * Create the default SmokeCOAlarm Cluster Server.
-     *
-     * @param smokeState - The state of the smoke alarm. Defaults to SmokeCoAlarm.AlarmState.Normal.
-     * @param coState - The state of the CO alarm. Defaults to SmokeCoAlarm.AlarmState.Normal.
-     * @returns The default SmokeCOAlarmClusterServer.
-     */
-    createDefaultSmokeCOAlarmClusterServer(smokeState?: SmokeCoAlarm.AlarmState, coState?: SmokeCoAlarm.AlarmState): void;
-    /**
-     * Returns the default Carbon Monoxide Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultCarbonMonoxideConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Carbon Monoxide Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultCarbonMonoxideConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Carbon Dioxide Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultCarbonDioxideConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Carbon Dioxide Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultCarbonDioxideConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Formaldehyde Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultFormaldehydeConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Formaldehyde Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultFormaldehydeConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Pm1 Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultPm1ConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Pm1 Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultPm1ConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Pm25 Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultPm25ConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Pm25 Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultPm25ConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Pm10 Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultPm10ConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Pm10 Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultPm10ConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Ozone Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultOzoneConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Ozone Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultOzoneConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Radon Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultRadonConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Radon Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultRadonConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default Nitrogen Dioxide Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     * @returns {ClusterServer} - The default Carbon Monoxide Concentration Measurement Cluster Server.
-     */
-    getDefaultNitrogenDioxideConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): ClusterServerObj<any>;
-    /**
-     * Create the default Nitrogen Dioxide Concentration Measurement Cluster Server.
-     *
-     * @param {number} measuredValue - The measured value of the concentration.
-     * @param {ConcentrationMeasurement.MeasurementUnit} measurementUnit - The unit of measurement.
-     * @param {ConcentrationMeasurement.MeasurementMedium} measurementMedium - The medium of measurement.
-     */
-    createDefaultNitrogenDioxideConcentrationMeasurementClusterServer(measuredValue?: number, measurementUnit?: ConcentrationMeasurement.MeasurementUnit, measurementMedium?: ConcentrationMeasurement.MeasurementMedium): void;
-    /**
-     * Returns the default fan control cluster server rev 2.
-     *
-     * @param fanMode The fan mode to set. Defaults to `FanControl.FanMode.Off`.
-     * @returns The default fan control cluster server.
-     */
-    getDefaultFanControlClusterServer(fanMode?: FanControl.FanMode): ClusterServerObj<any>;
-    /**
-     * Create the default fan control cluster server rev 2.
-     *
-     * @param fanMode The fan mode to set. Defaults to `FanControl.FanMode.Off`.
-     * @returns The default fan control cluster server.
-     */
-    createDefaultFanControlClusterServer(fanMode?: FanControl.FanMode): void;
-    /**
-     * Returns the default Pump Configuration And Control cluster server.
-     *
-     * @param {PumpConfigurationAndControl.OperationMode} [pumpMode=PumpConfigurationAndControl.OperationMode.Normal] - The pump mode to set. Defaults to `PumpConfigurationAndControl.OperationMode.Normal`.
-     * @returns {ClusterServer} - The default Pump Configuration And Control cluster server.
-     */
-    getDefaultPumpConfigurationAndControlClusterServer(pumpMode?: PumpConfigurationAndControl.OperationMode): ClusterServerObj<any>;
-    /**
-     * Creates the default Pump Configuration And Control cluster server.
-     *
-     * @param {PumpConfigurationAndControl.OperationMode} [pumpMode=PumpConfigurationAndControl.OperationMode.Normal] - The pump mode to set. Defaults to `PumpConfigurationAndControl.OperationMode.Normal`.
-     * @returns {void}
-     */
-    createDefaultPumpConfigurationAndControlClusterServer(pumpMode?: PumpConfigurationAndControl.OperationMode): void;
-    /**
-     * Returns the default Valve Configuration And Control cluster server rev 2.
-     *
-     * @param {ValveConfigurationAndControl.ValveState} [valveState=ValveConfigurationAndControl.ValveState.Closed] - The valve state to set. Defaults to `ValveConfigurationAndControl.ValveState.Closed`.
-     * @param {number} [valveLevel=0] - The valve level to set. Defaults to 0.
-     * @returns {ClusterServer} - The default Valve Configuration And Control cluster server.
-     */
-    getDefaultValveConfigurationAndControlClusterServer(valveState?: ValveConfigurationAndControl.ValveState, valveLevel?: number): ClusterServerObj<any>;
-    /**
-     * Create the default Valve Configuration And Control cluster server rev 2.
-     *
-     * @param {ValveConfigurationAndControl.ValveState} [valveState=ValveConfigurationAndControl.ValveState.Closed] - The valve state to set. Defaults to `ValveConfigurationAndControl.ValveState.Closed`.
-     * @param {number} [valveLevel=0] - The valve level to set. Defaults to 0.
-     * @returns {void}
-     */
-    createDefaultValveConfigurationAndControlClusterServer(valveState?: ValveConfigurationAndControl.ValveState, valveLevel?: number): void;
-}
-//# sourceMappingURL=matterbridgeEndpoint.d.ts.map