markuno_lib 1.2.6 → 1.2.8

package/LICENSE.txt

@@ -0,0 +1,44 @@
+CONTRATTO DI LICENZA SOFTWARE PROPRIETARIO
+
+© 2025 Croswil SRL. Tutti i diritti riservati.
+
+1. DEFINIZIONI
+   "Software" si riferisce a "croswil_componenti" e a tutti i file, documentazione, codice sorgente e compilato inclusi in questa distribuzione.
+   "Licenziante" si riferisce a Croswil SRL.
+   "Licenziatario" si riferisce alla persona fisica o giuridica che ha legalmente acquisito una licenza per utilizzare il Software.
+
+2. CONCESSIONE DELLA LICENZA
+   Il Licenziante concede al Licenziatario una licenza non esclusiva, non trasferibile e revocabile per utilizzare il Software esclusivamente per scopi interni, soggetta ai termini e alle condizioni di questo Contratto.
+
+3. RESTRIZIONI
+   Il Licenziatario NON può:
+   a) Copiare, modificare, adattare, tradurre o creare opere derivate dal Software;
+   b) Decompilare, disassemblare, decodificare o tentare in altro modo di scoprire il codice sorgente del Software;
+   c) Rimuovere, alterare o oscurare qualsiasi avviso di copyright o proprietà contenuto nel Software;
+   d) Distribuire, vendere, concedere in sublicenza, affittare, prestare o trasferire in altro modo il Software a terzi;
+   e) Utilizzare il Software per fornire servizi di hosting, servizi gestiti o servizi di application service provider a terzi;
+   f) Utilizzare il Software per sviluppare prodotti o servizi concorrenti.
+
+4. PROPRIETÀ INTELLETTUALE
+   Il Software è protetto dalle leggi sul copyright e da altre leggi sulla proprietà intellettuale. Il Licenziante mantiene tutti i diritti, titoli e interessi sul Software, inclusi tutti i diritti di proprietà intellettuale.
+
+5. GARANZIA LIMITATA
+   IL SOFTWARE VIENE FORNITO "COSÌ COM'È" SENZA GARANZIE DI ALCUN TIPO, ESPLICITE O IMPLICITE, INCLUSE, MA NON LIMITATE A, GARANZIE DI COMMERCIABILITÀ, IDONEITÀ PER UNO SCOPO PARTICOLARE E NON VIOLAZIONE.
+
+6. LIMITAZIONE DI RESPONSABILITÀ
+   IN NESSUN CASO IL LICENZIANTE SARÀ RESPONSABILE PER DANNI DIRETTI, INDIRETTI, INCIDENTALI, SPECIALI, ESEMPLARI O CONSEQUENZIALI (INCLUSI, MA NON LIMITATI A, PERDITA DI PROFITTI, INTERRUZIONE DELL'ATTIVITÀ, PERDITA DI INFORMAZIONI) DERIVANTI DALL'USO O DALL'IMPOSSIBILITÀ DI UTILIZZARE IL SOFTWARE.
+
+7. RISOLUZIONE
+   Questa licenza è valida fino alla risoluzione. Il Licenziante può risolvere questa licenza in qualsiasi momento se il Licenziatario viola uno qualsiasi dei suoi termini. Al momento della risoluzione, il Licenziatario deve cessare ogni utilizzo del Software e distruggere tutte le copie.
+
+8. LEGGE APPLICABILE
+   Questo Contratto è regolato dalle leggi di [Tuo Paese/Stato] senza riguardo ai suoi conflitti di principi di legge.
+
+9. INTERO ACCORDO
+   Questo Contratto costituisce l'intero accordo tra le parti in relazione all'oggetto del presente documento e sostituisce tutte le comunicazioni, proposte e rappresentazioni precedenti o contemporanee, orali o scritte.
+
+Utilizzando il Software, il Licenziatario riconosce di aver letto e compreso questo Contratto e accetta di essere vincolato dai suoi termini e condizioni.
+
+Croswil SRL
+Androna Sant'Eufemia 5, Trieste IT
+info@croswil.com

package/bin/markcad.js

@@ -286,7 +286,7 @@ function sharpCorners(path,thresholdDeg=45){const result=[],n=path.length;if(n<3
  * @param {number} thresholdDeg - Angolo in gradi.
  * @returns {Array<{ index: number, point: {x:number,y:number}, angle: number }>}
  */
-segment(i,inverse=!1){let n=pt.length;return i<0&&(i+=n),new Linea2(pt[i%n],pt[(i+(inverse?-1:1))%n])},lineoffset(i1,i2,offset){if((i1=(i1||0)%pt.length)!=(i2=(i2||0)%pt.length)){let l2=new Linea2(pt[i1],pt[i2]);if(l2){return l2=l2.offsetline(-offset),this.intersectline(l2)}}},orientasplitter(){-1!=orientation()&&pt.reverse();let np=pt.length;for(let i=0;i<np;i++){let lt=new Linea2(pt[(np+i-1)%np],pt[i]);if(Math.abs(Math.abs(lt.angle)-Math.PI)<.001){i&&selezionaprimo(i);break}}return this},move(x=0,y=0){"object"==typeof x&&x.x&&(y=x.y||0,x=x.x);for(let p of pt)p.x+=x,p.y+=y;return this},mirrorx(value=0){for(let p of pt)p.x=2*value-p.x;return this},mirrory(value=0){for(let p of pt)p.y=2*value-p.y;return this},simplify(tolerance,hq){return pt=function simplify(points,tolerance,highestQuality){if(points.length<=2)return points;var sqTolerance=void 0!==tolerance?tolerance*tolerance:1;return simplifyDouglasPeucker(points=highestQuality?points:function simplifyRadialDist(points,sqTolerance){for(var point,p1,p2,dx,dy,prevPoint=points[0],newPoints=[prevPoint],i=1,len=points.length;i<len;i++)p2=prevPoint,dx=void 0,dy=void 0,(dx=(p1=point=points[i]).x-p2.x)*dx+(dy=p1.y-p2.y)*dy>sqTolerance&&(newPoints.push(point),prevPoint=point);return prevPoint!==point&&newPoints.push(point),newPoints}(points,sqTolerance),sqTolerance)}(pt,tolerance,hq),this},fromclip(vv){pt=[];for(let p of vv)pt.push({x:p.x/1e3,y:p.y/1e3});return this},infosegmento(i,open=!1){const n=pt.length;function clampIndex(idx){return(idx+n)%n}function angle(p1,p2){return Math.atan2(p2.y-p1.y,p2.x-p1.x)}function angleDiff(a,b){let diff=a-b;for(;diff>Math.PI;)diff-=2*Math.PI;for(;diff<-Math.PI;)diff+=2*Math.PI;return diff}const p1=pt[i];let p0,p2,p3;if(open)if(0===i){const dx=pt[1].x-pt[0].x,dy=pt[1].y-pt[0].y;p0={x:pt[0].x-dx,y:pt[0].y-dy},p2=pt[1],p3=pt[2]}else if(i===n-1){const dx=pt[n-1].x-pt[n-2].x,dy=pt[n-1].y-pt[n-2].y;p0=pt[n-2],p2={x:pt[n-1].x+dx,y:pt[n-1].y+dy},p3={x:p2.x+dx,y:p2.y+dy}}else p0=pt[i-1],p2=pt[i+1],p3=i+2<n?pt[i+2]:{x:pt[i+1].x+(pt[i+1].x-pt[i].x),y:pt[i+1].y+(pt[i+1].y-pt[i].y)};else{const i0=clampIndex(i-1),i2=clampIndex(i+1),i3=clampIndex(i+2);p0=pt[i0],p2=pt[i2],p3=pt[i3]}const ang12=angle(p1,p2),ang01=angle(p0,p1),ang23=angle(p2,p3);return{x:p1.x,y:p1.y,l:function length(p1,p2){const dx=p2.x-p1.x,dy=p2.y-p1.y;return Math.sqrt(dx*dx+dy*dy)}(p1,p2),ang:ang12/PIF,a1:angleDiff(ang12,ang01)/PIF,a2:angleDiff(ang23,ang12)/PIF}},swapxy(){for(let i=0;i<pt.length;i++){let q=pt[i].x;pt[i].x=-pt[i].y,pt[i].y=-q}return this},fromvec(aa){return pt=[],_addvec(aa),this},addvec(vec){return _addvec(vec),this},frompt(pts){return pt=[...pts],pt=removeduplicate(pt),this},fromdxfvec(verts){let points=[];if(verts&&verts.length)for(let i=0;i<verts.length;i++){let{x:x,y:y,bulge:bulge}=verts[i];if(points.push({x:x,y:y}),bulge){const step=1;let p1={x:x,y:y},p2=verts[(i+1)%verts.length],dx=p2.x-p1.x,dy=p2.y-p1.y,dist=Math.hypot(dx,dy);dist>step&&points.push(...dxfbulge(p1,p2,bulge,Math.floor((dist-step)/step)+1))}}return pt=points.map((e=>({x:Math.round(10*e.x)/10,y:Math.round(10*e.y)/10}))),pt=removeduplicate(pt),this},fromstr(str){return pt=removeduplicate(function processTokens(tokens){const points=[];for(let i=0;i<tokens.length;i++){const token=tokens[i];if("point"===token.type)points.push(token.point);else if("command"===token.type)switch(token.cmd){case"x":{const p1=points[points.length-1],p2="point"===tokens[i+1]?.type?tokens[i+1].point:points[0],bulge=parseFloat(token.params[0])||5;{const STEP=1;let dx=p2.x-p1.x,dy=p2.y-p1.y,dist=Math.hypot(dx,dy);dist>1&&points.push(...dxfbulge(p1,p2,bulge,Math.floor((dist-STEP)/(STEP+2))+1))}break}case"b":{if(points.length<2)continue;const npt=parseInt(token.params[0])||5,p1=points[points.length-2],p2=points[points.length-1];let p3="point"===tokens[i+1]?.type?tokens[i+1].point:void 0,p4="point"===tokens[i+2]?.type?tokens[i+2].point:void 0;p3?p4||(p4=points[0]):(p3=points[0],p4=points[1]);const raccordo=raccordabezier(p1,p2,p3,p4,npt);points.push(...raccordo),i+=1;break}case"r":{if(points.length<1)continue;const dist=parseFloat(token.params[0])||5,npt=parseInt(token.params[1])||10,p1=points[points.length-1];let p2="point"===tokens[i+1]?.type?tokens[i+1].point:void 0,p3="point"===tokens[i+2]?.type?tokens[i+2].point:"point"===tokens[i+3]?.type?tokens[i+3].point:void 0;p2?p3||(p3=points[0]):(p2=points[0],p3=points[1],points.splice(0,1));const raccordo=raccordabezier3(p1,p2,p3,dist,npt);points.push(...raccordo),i+=1;break}case"c":{const radius=parseFloat(token.params[0])||50,segments=parseInt(token.params[1])||12,center="point"===tokens[i+1]?.type?tokens[i+1].point:new Punto2(0,0);for(let j=0;j<segments;j++)points.push(new Punto2(center.x+radius*Math.cos(j/segments*Math.PI*2),center.y+radius*Math.sin(j/segments*Math.PI*2)));i+=1;break}case"a":{let npt,p1="point"===tokens[i+1]?.type?tokens[i+1].point:void 0,p2="point"===tokens[i+2]?.type?tokens[i+2].point:void 0,p3="point"===tokens[i+3]?.type?tokens[i+3].point:void 0;if(!p1||!p3)continue;if(p2)if(token.params[0])npt=clamp(parseInt(token.params[0]),1,24);else{const chord=Math.hypot(p3.x-p1.x,p3.y-p1.y),sagitta=Math.abs((p2.x-p1.x)*(p3.y-p1.y)-(p3.x-p1.x)*(p2.y-p1.y))/(2*chord);npt=Math.round(chord*Math.sqrt(sagitta/(chord+.1))*10),npt=clamp(npt,1,24),npt=1}else p2=p3,npt=0;const arcoPoints=arcfrom3point(npt,p1,p2,p3);points.push(...arcoPoints),i+=3;break}}}return points}(function tokenize(str){const tokens=[],values=str.replace(/[\n\r,;]/g," ").replace(/\s+/g," ").toLowerCase().trim().split(" ").filter((s=>s.length>0));let i=0;for(;i<values.length;){const val=values[i];/^[brcax]/.test(val)?(tokens.push({type:"command",cmd:val[0],params:val.slice(1).split(":")}),i++):i<values.length-1&&/^-?\d+(\.\d+)?$/.test(values[i])&&/^-?\d+(\.\d+)?$/.test(values[i+1])?(tokens.push({type:"point",point:new Punto2(parseFloat(values[i]),parseFloat(values[i+1]))}),i+=2):i++}return tokens}(str))),this},monotona(vert=!0){let pp=[...pt];vert?(pp[0].x==pp[1].x&&(pp=pp.slice(1)),pp[pp.length-2].x==pp[pp.length-1].x&&(pp=pp.slice(0,-1))):(pp[0].y==pp[1].y&&(pp=pp.slice(1)),pp[pp.length-2].y==pp[pp.length-1].y&&(pp=pp.slice(0,-1)));const vv=i=>vert?pt[i].y:pt[i].x,crescente=vv(0)<vv(pt.length-1),newpt=[];let lastv=vv(0);newpt.push(pp[0]);for(let i=1;i<pp.length;i++)if(crescente){if(vv(i)>lastv+1e-4)newpt.push(pp[i]),lastv=vv(i);else if(Math.abs(vv(i)-lastv)<1e-4){const newv=lastv+1e-4;newpt.push(vert?{x:pp[i].x,y:newv}:{x:newv,y:pp[i].y}),lastv=newv}}else if(vv(i)<lastv-1e-4)newpt.push(pp[i]),lastv=vv(i);else if(Math.abs(vv(i)-lastv)<1e-4){const newv=lastv-1e-4;newpt.push(vert?{x:pp[i].x,y:newv}:{x:newv,y:pp[i].y}),lastv=newv}return getshape().frompt(newpt)},splitshape(p,verticale=!0){const p1=verticale?{x:p.x,y:p.y-100}:{x:p.x-100,y:p.y},p2=verticale?{x:p.x,y:p.y+100}:{x:p.x+100,y:p.y},linea=this.intersectline(new Linea2(p1,p2));if(!linea)return null;const pstart=linea.p1,pend=linea.p2,findIndex=pt=>this.pt.findIndex(((v,i)=>new Linea2(v,this.pt[(i+1)%this.pt.length]).onsegment(pt))),i1=findIndex(pstart),i2=findIndex(pend);if(i1<0||i2<0)return null;const n=this.pt.length,loop=(a,b,p0,p1)=>{const res=[p0];for(let i=a;i!==b;i=(i+1)%n)res.push(this.pt[(i+1)%n]);return res.push(p1),res},sx=getshape().frompt(loop(i1,i2,pstart,pend)),dx=getshape().frompt(loop(i2,i1,pend,pstart)),unique=new Set,arr=[...sx.pt,...dx.pt];for(const p of arr)unique.add(verticale?p.y:p.x);return{sx:sx,dx:dx,linea:linea,valori:Array.from(unique).sort(((a,b)=>a-b)),valore0:verticale?p.y:p.x}},xfromy(y,valore0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.y<=y&&p2.y>=y||p2.y<=y&&p1.y>=y){const dy=p2.y-p1.y,t=dy?(y-p1.y)/dy:0,x=p1.x+t*(p2.x-p1.x);res.push(x)}else p1.y===y&&p2.y===y&&res.push(maggiore?Math.max(p1.x,p2.x):Math.min(p1.x,p2.x))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},yfromx(x,valore0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.x<=x&&p2.x>=x||p2.x<=x&&p1.x>=x){const dx=p2.x-p1.x,t=dx?(x-p1.x)/dx:0,y=p1.y+t*(p2.y-p1.y);res.push(y)}else p1.x===x&&p2.x===x&&res.push(maggiore?Math.max(p1.y,p2.y):Math.min(p1.y,p2.y))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},forcevalues(shape,verticale=!0,delta=1e-6){const sorted=[...new Set(shape.pt.map((e=>verticale?e.y:e.x)))].sort(((a,b)=>a-b)),newpt=[],n=pt.length;for(let i=0;i<n;i++){const p1=pt[i],p2=pt[(i+1)%n];newpt.push({...p1});let v1=verticale?p1.y:p1.x,v2=verticale?p2.y:p2.x;if(v1===v2)continue;const range=v2>v1?sorted.filter((v=>v>v1+delta&&v<v2-delta)):sorted.filter((v=>v<v1-delta&&v>v2+delta)).reverse();for(const v of range){const t=(v-v1)/(v2-v1),q={x:p1.x+t*(p2.x-p1.x),y:p1.y+t*(p2.y-p1.y)};newpt.push(q)}}return pt=newpt,this},fromrect(w,h,sx,sy,bordo){w||(w=10),h||(h=10),bordo||(bordo=0),bordo=Math.min(Math.abs(bordo),Math.abs(.4*w),Math.abs(.4*h));let b1=w>0?bordo:-bordo,b2=h>0?bordo:-bordo;return pt=bordo?[{x:b1,y:0},{x:w-b1,y:0},{x:w,y:b2},{x:w,y:h-b2},{x:w-b1,y:h},{x:b1,y:h},{x:0,y:h-b2},{x:0,y:b2}]:[{x:0,y:0},{x:w,y:0},{x:w,y:h},{x:0,y:h}],this},intersectline:l=>function _intersectline(shape,p3,p4){let n=shape.length,l=new Linea2(p3,p4);const intersezioni=[];for(let i=0;i<shape.length;i++){let l2=new Linea2(shape[i],shape[(i+1)%n]),p=l2.interseca(l);p&&l2.onsegment(p)&&intersezioni.push(p)}if(intersezioni.length<2)return null;const{dx:dx,dy:dy}=l;intersezioni.sort(((a,b)=>(a.x-p3.x)*dx+(a.y-p3.y)*dy-((b.x-p3.x)*dx+(b.y-p3.y)*dy)));let pstart=new Punto2(intersezioni[0].x,intersezioni[0].y),pend=new Punto2(intersezioni[intersezioni.length-1].x,intersezioni[intersezioni.length-1].y);const vx1=pend.x-pstart.x,vy1=pend.y-pstart.y;return vx1*dx+vy1*dy<0&&([pstart,pend]=[pend,pstart]),new Linea2(pstart,pend)}(pt,l.p1,l.p2),tostr(dec=2){let dd=10**dec,pstr=x=>String(Math.round(x*dd)/dd),cl=pt.map((e=>`${pstr(e.x)};${pstr(e.y)};`)).join("");return cl&&cl.length?cl.slice(0,-1).match(/.{1,80}(;|$)/g).map((s=>s.trim())).join("\n"):""},addpt(pts){return pts?(Array.isArray(pts)||(pts=[pts]),pt=removeduplicate([...pt,...pts]),this):this},addracc(v1,v2,suddivisioni=2,addv1v2=!0){if(Array.isArray(v1)&&(v2={x:v1[2]||0,y:v1[3]||0},v1={x:v1[0]||0,y:v1[1]||0}),pt.length>=2){let tm=raccordabezier(pt[pt.length-2],pt[pt.length-1],v1,v2,suddivisioni);pt=[...pt,...tm],addv1v2&&(pt.push(v1),pt.push(v2))}return pt=removeduplicate(pt),this},setorient(mode){let p=orientation();return(1==p&&-1==mode||-1==p&&1==mode)&&pt.reverse(),this},reverse(){return pt.reverse(),this},pointinshape:p=>function isPointInPolygon(P){let x=P.x,y=P.y,inside=!1;for(let i=0,j=pt.length-1;i<pt.length;j=i++){let xi=pt[i].x,yi=pt[i].y,xj=pt[j].x,yj=pt[j].y;yi>y!=yj>y&&x<(xj-xi)*(y-yi)/(yj-yi)+xi&&(inside=!inside)}return inside}(p),azzera(){return pt=[],this},removeduplicate(delta=.005){return pt=removeduplicate(pt,delta),this},to3d(u0,alt=0,coeffa=0,coeffb=0,open=!1,sh=null,invert=!1){let tm=function to3dcoor(path,options){let{currentU:currentU=0,c:c=0,a:a=0,b:b=0,anglemin:anglemin=30,open:open=!1,sh:sh=null}=options;const pointsWithNormals=[];sh&&sh.pt.length;const n=path.length;for(let i=0;i<n;i++){const prev=path[(i-1+n)%n],current=path[i],next=path[(i+1)%n],vPrev={x:current.x-prev.x,y:current.y-prev.y},vNext={x:next.x-current.x,y:next.y-current.y},normalPrev=normal2(prev,current),normalNext=normal2(current,next),angle=angle2vec(vPrev,vNext);let z=a*current.x+b*current.y+c;if(sh){let t=sh.xfromy(current.y,0,!0);console.log("y",current.y,t),z+=t}Math.abs(angle-180)<=anglemin?(normalPrev.nx,normalNext.nx,normalPrev.ny,normalNext.ny,pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z})):(pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}),pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}));const dx=next.x-current.x,dy=next.y-current.y;currentU+=Math.sqrt(dx*dx+dy*dy)}if(!open){let p=pointsWithNormals[0],pf=pointsWithNormals[pointsWithNormals.length-1];p.x==pf.x&&p.y==pf.y||pointsWithNormals.push({x:p.x,y:p.y,z:p.z,nx:p.nx,ny:p.ny,nz:p.nz,u:currentU,v:p.z})}return pointsWithNormals}(pt,{open:open,currentU:u0,c:alt,a:coeffa,b:coeffb,anglemin:30,sh:sh});return tm},getboundbox:()=>pt.length?pt.reduce(((box,p)=>(box.p1.x=Math.min(box.p1.x,p.x),box.p1.y=Math.min(box.p1.y,p.y),box.p2.x=Math.max(box.p2.x,p.x),box.p2.y=Math.max(box.p2.y,p.y),box)),{p1:new Punto2(1/0,1/0),p2:new Punto2(-1/0,-1/0)}):{p1:new Punto2(0,0),p2:new Punto2(0,0)},fittobox(p1,p2){if(!pt.length)return this;const currentBox=this.getboundbox(),currentWidth=currentBox.p2.x-currentBox.p1.x,currentHeight=currentBox.p2.y-currentBox.p1.y,targetWidth=p2.x-p1.x,targetHeight=p2.y-p1.y,scale=Math.min(targetWidth/(currentWidth||1),targetHeight/(currentHeight||1));for(let p of pt)p.x=(p.x-currentBox.p1.x)*scale,p.y=(p.y-currentBox.p1.y)*scale,p.x+=p1.x,p.y+=p1.y;return this}}}
+segment(i,inverse=!1){let n=pt.length;return i<0&&(i+=n),new Linea2(pt[i%n],pt[(i+(inverse?-1:1))%n])},lineoffset(i1,i2,offset){if((i1=(i1||0)%pt.length)!=(i2=(i2||0)%pt.length)){let l2=new Linea2(pt[i1],pt[i2]);if(l2){return l2=l2.offsetline(-offset),this.intersectline(l2)}}},orientasplitter(){-1!=orientation()&&pt.reverse();let np=pt.length;for(let i=0;i<np;i++){let lt=new Linea2(pt[(np+i-1)%np],pt[i]);if(Math.abs(Math.abs(lt.angle)-Math.PI)<.001){i&&selezionaprimo(i);break}}return this},move(x=0,y=0){"object"==typeof x&&x.x&&(y=x.y||0,x=x.x);for(let p of pt)p.x+=x,p.y+=y;return this},mirrorx(value=0){for(let p of pt)p.x=2*value-p.x;return this},mirrory(value=0){for(let p of pt)p.y=2*value-p.y;return this},simplify(tolerance,hq){return pt=function simplify(points,tolerance,highestQuality){if(points.length<=2)return points;var sqTolerance=void 0!==tolerance?tolerance*tolerance:1;return simplifyDouglasPeucker(points=highestQuality?points:function simplifyRadialDist(points,sqTolerance){for(var point,p1,p2,dx,dy,prevPoint=points[0],newPoints=[prevPoint],i=1,len=points.length;i<len;i++)p2=prevPoint,dx=void 0,dy=void 0,(dx=(p1=point=points[i]).x-p2.x)*dx+(dy=p1.y-p2.y)*dy>sqTolerance&&(newPoints.push(point),prevPoint=point);return prevPoint!==point&&newPoints.push(point),newPoints}(points,sqTolerance),sqTolerance)}(pt,tolerance,hq),this},fromclip(vv){pt=[];for(let p of vv)pt.push({x:p.x/1e3,y:p.y/1e3});return this},infosegmento(i,open=!1){const n=pt.length;function clampIndex(idx){return(idx+n)%n}function angle(p1,p2){return Math.atan2(p2.y-p1.y,p2.x-p1.x)}function angleDiff(a,b){let diff=a-b;for(;diff>Math.PI;)diff-=2*Math.PI;for(;diff<-Math.PI;)diff+=2*Math.PI;return diff}const p1=pt[i];let p0,p2,p3;if(open)if(0===i){const dx=pt[1].x-pt[0].x,dy=pt[1].y-pt[0].y;p0={x:pt[0].x-dx,y:pt[0].y-dy},p2=pt[1],p3=pt[2]}else if(i===n-1){const dx=pt[n-1].x-pt[n-2].x,dy=pt[n-1].y-pt[n-2].y;p0=pt[n-2],p2={x:pt[n-1].x+dx,y:pt[n-1].y+dy},p3={x:p2.x+dx,y:p2.y+dy}}else p0=pt[i-1],p2=pt[i+1],p3=i+2<n?pt[i+2]:{x:pt[i+1].x+(pt[i+1].x-pt[i].x),y:pt[i+1].y+(pt[i+1].y-pt[i].y)};else{const i0=clampIndex(i-1),i2=clampIndex(i+1),i3=clampIndex(i+2);p0=pt[i0],p2=pt[i2],p3=pt[i3]}const ang12=angle(p1,p2),ang01=angle(p0,p1),ang23=angle(p2,p3);return{x:p1.x,y:p1.y,l:function length(p1,p2){const dx=p2.x-p1.x,dy=p2.y-p1.y;return Math.sqrt(dx*dx+dy*dy)}(p1,p2),ang:ang12/PIF,a1:angleDiff(ang12,ang01)/PIF,a2:angleDiff(ang23,ang12)/PIF}},swapxy(){for(let i=0;i<pt.length;i++){let q=pt[i].x;pt[i].x=-pt[i].y,pt[i].y=-q}return this},fromvec(aa){return pt=[],_addvec(aa),this},addvec(vec){return _addvec(vec),this},frompt(pts){return pt=[...pts],pt=removeduplicate(pt),this},fromdxfvec(verts){let points=[];if(verts&&verts.length)for(let i=0;i<verts.length;i++){let{x:x,y:y,bulge:bulge}=verts[i];if(points.push({x:x,y:y}),bulge){const step=1;let p1={x:x,y:y},p2=verts[(i+1)%verts.length],dx=p2.x-p1.x,dy=p2.y-p1.y,dist=Math.hypot(dx,dy);dist>step&&points.push(...dxfbulge(p1,p2,bulge,Math.floor((dist-step)/step)+1))}}return pt=points.map((e=>({x:Math.round(10*e.x)/10,y:Math.round(10*e.y)/10}))),pt=removeduplicate(pt),this},fromstr(str){return pt=removeduplicate(function processTokens(tokens){const points=[];for(let i=0;i<tokens.length;i++){const token=tokens[i];if("point"===token.type)points.push(token.point);else if("command"===token.type)switch(token.cmd){case"x":{const p1=points[points.length-1],p2="point"===tokens[i+1]?.type?tokens[i+1].point:points[0],bulge=parseFloat(token.params[0])||5;{const STEP=1;let dx=p2.x-p1.x,dy=p2.y-p1.y,dist=Math.hypot(dx,dy);dist>1&&points.push(...dxfbulge(p1,p2,bulge,Math.floor((dist-STEP)/(STEP+2))+1))}break}case"b":{if(points.length<2)continue;const npt=parseInt(token.params[0])||5,p1=points[points.length-2],p2=points[points.length-1];let p3="point"===tokens[i+1]?.type?tokens[i+1].point:void 0,p4="point"===tokens[i+2]?.type?tokens[i+2].point:void 0;p3?p4||(p4=points[0]):(p3=points[0],p4=points[1]);const raccordo=raccordabezier(p1,p2,p3,p4,npt);points.push(...raccordo),i+=1;break}case"r":{if(points.length<1)continue;const dist=parseFloat(token.params[0])||5,npt=parseInt(token.params[1])||10,p1=points[points.length-1];let p2="point"===tokens[i+1]?.type?tokens[i+1].point:void 0,p3="point"===tokens[i+2]?.type?tokens[i+2].point:"point"===tokens[i+3]?.type?tokens[i+3].point:void 0;p2?p3||(p3=points[0]):(p2=points[0],p3=points[1],points.splice(0,1));const raccordo=raccordabezier3(p1,p2,p3,dist,npt);points.push(...raccordo),i+=1;break}case"c":{const radius=parseFloat(token.params[0])||50,segments=parseInt(token.params[1])||12,center="point"===tokens[i+1]?.type?tokens[i+1].point:new Punto2(0,0);for(let j=0;j<segments;j++)points.push(new Punto2(center.x+radius*Math.cos(j/segments*Math.PI*2),center.y+radius*Math.sin(j/segments*Math.PI*2)));i+=1;break}case"a":{let npt,p1="point"===tokens[i+1]?.type?tokens[i+1].point:void 0,p2="point"===tokens[i+2]?.type?tokens[i+2].point:void 0,p3="point"===tokens[i+3]?.type?tokens[i+3].point:void 0;if(!p1||!p3)continue;if(p2)if(token.params[0])npt=clamp(parseInt(token.params[0]),1,24);else{const chord=Math.hypot(p3.x-p1.x,p3.y-p1.y),sagitta=Math.abs((p2.x-p1.x)*(p3.y-p1.y)-(p3.x-p1.x)*(p2.y-p1.y))/(2*chord);npt=Math.round(chord*Math.sqrt(sagitta/(chord+.1))*10),npt=clamp(npt,1,24),npt=1}else p2=p3,npt=0;const arcoPoints=arcfrom3point(npt,p1,p2,p3);points.push(...arcoPoints),i+=3;break}}}return points}(function tokenize(str){const tokens=[],values=str.replace(/[\n\r,;]/g," ").replace(/\s+/g," ").toLowerCase().trim().split(" ").filter((s=>s.length>0));let i=0;for(;i<values.length;){const val=values[i];/^[brcax]/.test(val)?(tokens.push({type:"command",cmd:val[0],params:val.slice(1).split(":")}),i++):i<values.length-1&&/^-?\d+(\.\d+)?$/.test(values[i])&&/^-?\d+(\.\d+)?$/.test(values[i+1])?(tokens.push({type:"point",point:new Punto2(parseFloat(values[i]),parseFloat(values[i+1]))}),i+=2):i++}return tokens}(str))),this},monotona(){let dxd=dims(pt),pp=pt.map((e=>({x:e.x-dxd.p2.x,y:e.y}))),xp=[];xp.push(pp[0]);let lastv=pp[0].y;for(let i=1;i<pp.length;i++)if(pp[i].y>lastv+1e-4||i==pp.length-1)xp.push(pp[i]),lastv=pp[i].y;else{const newv=lastv+1e-4;xp.push({x:pp[i].x,y:newv}),lastv=newv}return{sh:getshape().frompt(xp),...dxd}},splitshape(p,verticale=!0){const p1=verticale?{x:p.x,y:p.y-100}:{x:p.x-100,y:p.y},p2=verticale?{x:p.x,y:p.y+100}:{x:p.x+100,y:p.y},linea=this.intersectline(new Linea2(p1,p2));if(!linea)return null;const pstart=linea.p1,pend=linea.p2,findIndex=pt=>this.pt.findIndex(((v,i)=>new Linea2(v,this.pt[(i+1)%this.pt.length]).onsegment(pt))),i1=findIndex(pstart),i2=findIndex(pend);if(i1<0||i2<0)return null;const n=this.pt.length,loop=(a,b,p0,p1)=>{const res=[];for(let i=a;i!==b;i=(i+1)%n)res.push(this.pt[(i+1)%n]);return res},dx=getshape().frompt(loop(i1,i2));return{sx:getshape().frompt(loop(i2,i1)),dx:dx,linea:linea}},xfromy(y,valore0=0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.y<=y&&p2.y>=y||p2.y<=y&&p1.y>=y){const dy=p2.y-p1.y,t=dy?(y-p1.y)/dy:0,x=p1.x+t*(p2.x-p1.x);res.push(x)}else p1.y===y&&p2.y===y&&res.push(maggiore?Math.max(p1.x,p2.x):Math.min(p1.x,p2.x))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},yfromx(x,valore0=0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.x<=x&&p2.x>=x||p2.x<=x&&p1.x>=x){const dx=p2.x-p1.x,t=dx?(x-p1.x)/dx:0,y=p1.y+t*(p2.y-p1.y);res.push(y)}else p1.x===x&&p2.x===x&&res.push(maggiore?Math.max(p1.y,p2.y):Math.min(p1.y,p2.y))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},forcevalues(shape,verticale=!0,delta=1e-6){const sorted=[...new Set(shape.pt.map((e=>verticale?e.y:e.x)))].sort(((a,b)=>a-b)),newpt=[],n=pt.length;for(let i=0;i<n;i++){const p1=pt[i],p2=pt[(i+1)%n];newpt.push({...p1});let v1=verticale?p1.y:p1.x,v2=verticale?p2.y:p2.x;if(v1===v2)continue;const range=v2>v1?sorted.filter((v=>v>v1+delta&&v<v2-delta)):sorted.filter((v=>v<v1-delta&&v>v2+delta)).reverse();for(const v of range){const t=(v-v1)/(v2-v1),q={x:p1.x+t*(p2.x-p1.x),y:p1.y+t*(p2.y-p1.y)};newpt.push(q)}}return pt=newpt,this},fromrect(w,h,sx,sy,bordo){w||(w=10),h||(h=10),bordo||(bordo=0),bordo=Math.min(Math.abs(bordo),Math.abs(.4*w),Math.abs(.4*h));let b1=w>0?bordo:-bordo,b2=h>0?bordo:-bordo;return pt=bordo?[{x:b1,y:0},{x:w-b1,y:0},{x:w,y:b2},{x:w,y:h-b2},{x:w-b1,y:h},{x:b1,y:h},{x:0,y:h-b2},{x:0,y:b2}]:[{x:0,y:0},{x:w,y:0},{x:w,y:h},{x:0,y:h}],this},intersectline:l=>function _intersectline(shape,p3,p4){let n=shape.length,l=new Linea2(p3,p4);const intersezioni=[];for(let i=0;i<shape.length;i++){let l2=new Linea2(shape[i],shape[(i+1)%n]),p=l2.interseca(l);p&&l2.onsegment(p)&&intersezioni.push(p)}if(intersezioni.length<2)return null;const{dx:dx,dy:dy}=l;intersezioni.sort(((a,b)=>(a.x-p3.x)*dx+(a.y-p3.y)*dy-((b.x-p3.x)*dx+(b.y-p3.y)*dy)));let pstart=new Punto2(intersezioni[0].x,intersezioni[0].y),pend=new Punto2(intersezioni[intersezioni.length-1].x,intersezioni[intersezioni.length-1].y);const vx1=pend.x-pstart.x,vy1=pend.y-pstart.y;return vx1*dx+vy1*dy<0&&([pstart,pend]=[pend,pstart]),new Linea2(pstart,pend)}(pt,l.p1,l.p2),tostr(dec=2){let dd=10**dec,pstr=x=>String(Math.round(x*dd)/dd),cl=pt.map((e=>`${pstr(e.x)};${pstr(e.y)};`)).join("");return cl&&cl.length?cl.slice(0,-1).match(/.{1,80}(;|$)/g).map((s=>s.trim())).join("\n"):""},addpt(pts){return pts?(Array.isArray(pts)||(pts=[pts]),pt=removeduplicate([...pt,...pts]),this):this},addracc(v1,v2,suddivisioni=2,addv1v2=!0){if(Array.isArray(v1)&&(v2={x:v1[2]||0,y:v1[3]||0},v1={x:v1[0]||0,y:v1[1]||0}),pt.length>=2){let tm=raccordabezier(pt[pt.length-2],pt[pt.length-1],v1,v2,suddivisioni);pt=[...pt,...tm],addv1v2&&(pt.push(v1),pt.push(v2))}return pt=removeduplicate(pt),this},setorient(mode){let p=orientation();return(1==p&&-1==mode||-1==p&&1==mode)&&pt.reverse(),this},reverse(){return pt.reverse(),this},pointinshape:p=>function isPointInPolygon(P){let x=P.x,y=P.y,inside=!1;for(let i=0,j=pt.length-1;i<pt.length;j=i++){let xi=pt[i].x,yi=pt[i].y,xj=pt[j].x,yj=pt[j].y;yi>y!=yj>y&&x<(xj-xi)*(y-yi)/(yj-yi)+xi&&(inside=!inside)}return inside}(p),azzera(){return pt=[],this},removeduplicate(delta=.005){return pt=removeduplicate(pt,delta),this},to3d(u0,alt=0,coeffa=0,coeffb=0,open=!1,sh=null,invert=!1){let tm=function to3dcoor(path,options){let{currentU:currentU=0,c:c=0,a:a=0,b:b=0,anglemin:anglemin=30,open:open=!1,sh:sh=null,invert:invert=!1}=options;const pointsWithNormals=[],n=path.length;for(let i=0;i<n;i++){const prev=path[(i-1+n)%n],current=path[i],next=path[(i+1)%n],vPrev={x:current.x-prev.x,y:current.y-prev.y},vNext={x:next.x-current.x,y:next.y-current.y},normalPrev=normal2(prev,current),normalNext=normal2(current,next),angle=angle2vec(vPrev,vNext);let z=a*current.x+b*current.y+c;if(sh){let t=sh.xfromy(current.y,0,!0);invert?z+=t:z-=t}Math.abs(angle-180)<=anglemin?(normalPrev.nx,normalNext.nx,normalPrev.ny,normalNext.ny,pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z})):(pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}),pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}));const dx=next.x-current.x,dy=next.y-current.y;currentU+=Math.sqrt(dx*dx+dy*dy)}if(!open){let p=pointsWithNormals[0],pf=pointsWithNormals[pointsWithNormals.length-1];p.x==pf.x&&p.y==pf.y||pointsWithNormals.push({x:p.x,y:p.y,z:p.z,nx:p.nx,ny:p.ny,nz:p.nz,u:currentU,v:p.z})}return pointsWithNormals}(pt,{open:open,currentU:u0,c:alt,a:coeffa,b:coeffb,anglemin:30,sh:sh,invert:invert});return tm},getboundbox:()=>pt.length?pt.reduce(((box,p)=>(box.p1.x=Math.min(box.p1.x,p.x),box.p1.y=Math.min(box.p1.y,p.y),box.p2.x=Math.max(box.p2.x,p.x),box.p2.y=Math.max(box.p2.y,p.y),box)),{p1:new Punto2(1/0,1/0),p2:new Punto2(-1/0,-1/0)}):{p1:new Punto2(0,0),p2:new Punto2(0,0)},fittobox(p1,p2){if(!pt.length)return this;const currentBox=this.getboundbox(),currentWidth=currentBox.p2.x-currentBox.p1.x,currentHeight=currentBox.p2.y-currentBox.p1.y,targetWidth=p2.x-p1.x,targetHeight=p2.y-p1.y,scale=Math.min(targetWidth/(currentWidth||1),targetHeight/(currentHeight||1));for(let p of pt)p.x=(p.x-currentBox.p1.x)*scale,p.y=(p.y-currentBox.p1.y)*scale,p.x+=p1.x,p.y+=p1.y;return this}}}
 /**
  * Calcola i punti di un arco passante per tre punti
  * @param {number} segments - Numero di segmenti (punti-1)
@@ -631,7 +631,7 @@ function toTrianglesDrawMode(geometry,drawMode){if(drawMode===TrianglesDrawMode)
  * @param {Array} mats - Array di materiali
  * @param {Object} options - Opzioni di configurazione
  * @returns {THREE.Group} Gruppo contenente la geometria estrusa
- */function estruso(gcad,orient,hshape,shape,holes,mats,options){options||(options={}),mats||(mats=[]),Array.isArray(mats)||(mats=[mats,mats,mats]);let p0=options.p0||0,coeffbase1=Math.tan(options.coeffbase1*PIF||0),coeffbase2=Math.tan(options.coeffbase2*PIF||0),p1=hshape||options.p1||20,coefftop1=Math.tan(options.coefftop1*PIF||0),coefftop2=Math.tan(options.coefftop2*PIF||0),shapetop=options.shapetop,shapebase=options.shapebase||options.shapebottom;shapetop&&(coefftop2=0),shapebase&&(coefftop2=0);let shb=shapebase?shapebase.key:"",sht=shapetop?shapetop.key:"",opinvert=options.invert||!1,open=options.open||!1,grp=new THREE.Group;if(shape){if(!options.nobase){let g1=bottomgeomfromshape(gcad,!1,shape,open?[]:holes,p0,coeffbase1,coeffbase2,shapebase);options.nolines||grp.add(edgesfromgeometry(g1)),grp.add(getmesh(g1,mats[0]||mwhite))}if(!options.notop){let g3=bottomgeomfromshape(gcad,!0,shape,open?[]:holes,p1,coefftop1,coefftop2,shapetop);grp.add(getmesh(g3,mats[1]||mats[0]||mwhite)),options.nolines||grp.add(edgesfromgeometry(g3))}if(!options.nosides){let pat1=shape.to3d(0,p0,coeffbase1,-coeffbase2,open,shapebase,!opinvert),pat2=shape.to3d(1,p1,coefftop1,-coefftop2,open,shapetop,opinvert),ky=`${shape.key}${opinvert?1:0}|${p0}|${p1}|${coeffbase1}|${coeffbase2||shb}|${coefftop1}|${coefftop2||sht}|${open}`,geo1=sidegeomfromshapes(gcad,ky,pat1,pat2,!1);if(options.nolines||options.nosidelines||grp.add(edgesfromgeometry(geo1)),grp.add(getmesh(geo1,mats[2]||mats[0]||mwhite)),holes&&!open)for(var h of holes){pat1=h.to3d(0,p0,coeffbase1,coeffbase2),pat2=h.to3d(0,p1,coefftop1,coefftop2),ky=`${h.key}|${p0}|${p1}|${coeffbase1}|${coeffbase2}|${coefftop1}|${coefftop2}`;let geo2=sidegeomfromshapes(gcad,ky,pat1,pat2,!0);options.nolines||options.nosidelines||grp.add(edgesfromgeometry(geo2)),grp.add(getmesh(geo2,mats[3]||mats[0]||mwhite))}}return estrusorotate(orient,grp,hshape)}return grp}function revolve(gcad,shape,orient,mat,options){options||(options={});let segmenti=options.segmenti??12,ky=hash(`rev|${shape.key}|${orient}|${segmenti}`),geometria=gcad.geo[ky],grp=new THREE.Group;if(!geometria){const punti3D=shape.pt.map((p=>new THREE.Vector3(p.x,p.y,0)));geometria=new THREE.LatheGeometry(punti3D,segmenti,0,2*Math.PI),gcad.geo[ky]=geometria}const mesh=new THREE.Mesh(geometria,mat);return grp.add(mesh),options.nolines||options.nosidelines||grp.add(edgesfromgeometry(geometria)),grp}
+ */function estruso(gcad,orient,hshape,shape,holes,mats,options){options||(options={}),mats||(mats=[]),Array.isArray(mats)||(mats=[mats,mats,mats]);let p0=options.p0||0,coeffbase1=Math.tan(options.coeffbase1*PIF||0),coeffbase2=Math.tan(options.coeffbase2*PIF||0),p1=hshape||options.p1||20,coefftop1=Math.tan(options.coefftop1*PIF||0),coefftop2=Math.tan(options.coefftop2*PIF||0),shapetop=options.shapetop,shapebase=options.shapebase||options.shapebottom;shapetop&&(coefftop2=0),shapebase&&(coefftop2=0);let shb=shapebase?shapebase.key:"",sht=shapetop?shapetop.key:"",opinvert=options.invert||!1,open=options.open||!1,grp=new THREE.Group;if(shape){if(!options.nobase&&!shapebase){let g1=bottomgeomfromshape(gcad,!1,shape,open?[]:holes,p0,coeffbase1,coeffbase2,shapebase);options.nolines||grp.add(edgesfromgeometry(g1)),grp.add(getmesh(g1,mats[0]||mwhite))}if(!options.notop&&!shapetop){let g3=bottomgeomfromshape(gcad,!0,shape,open?[]:holes,p1,coefftop1,coefftop2,shapetop);grp.add(getmesh(g3,mats[1]||mats[0]||mwhite)),options.nolines||grp.add(edgesfromgeometry(g3))}if(!options.nosides){let pat1=shape.to3d(0,p0,coeffbase1,-coeffbase2,open,shapebase,!opinvert),pat2=shape.to3d(1,p1,coefftop1,-coefftop2,open,shapetop,opinvert),ky=`${shape.key}${opinvert?1:0}|${p0}|${p1}|${coeffbase1}|${coeffbase2||shb}|${coefftop1}|${coefftop2||sht}|${open}`,geo1=sidegeomfromshapes(gcad,ky,pat1,pat2,!1);if(options.nolines||options.nosidelines||grp.add(edgesfromgeometry(geo1)),grp.add(getmesh(geo1,mats[2]||mats[0]||mwhite)),holes&&!open)for(var h of holes){pat1=h.to3d(0,p0,coeffbase1,coeffbase2),pat2=h.to3d(0,p1,coefftop1,coefftop2),ky=`${h.key}|${p0}|${p1}|${coeffbase1}|${coeffbase2}|${coefftop1}|${coefftop2}`;let geo2=sidegeomfromshapes(gcad,ky,pat1,pat2,!0);options.nolines||options.nosidelines||grp.add(edgesfromgeometry(geo2)),grp.add(getmesh(geo2,mats[3]||mats[0]||mwhite))}}return estrusorotate(orient,grp,hshape)}return grp}function revolve(gcad,shape,orient,mat,options){options||(options={});let segmenti=options.segmenti??12,ky=hash(`rev|${shape.key}|${orient}|${segmenti}`),geometria=gcad.geo[ky],grp=new THREE.Group;if(!geometria){const punti3D=shape.pt.map((p=>new THREE.Vector3(p.x,p.y,0)));geometria=new THREE.LatheGeometry(punti3D,segmenti,0,2*Math.PI),gcad.geo[ky]=geometria}const mesh=new THREE.Mesh(geometria,mat);return grp.add(mesh),options.nolines||options.nosidelines||grp.add(edgesfromgeometry(geometria)),grp}
 /**
  * Crea una geometria estrusa con opzioni avanzate
  * @param {string} orient - Orientamento dell'estrusione

package/package.json

@@ -1,11 +1,12 @@
 {
   "name": "markuno_lib",
-  "version": "1.2.6",
+  "version": "1.2.8",
   "description": "Croswil Markuno Language Lib",
+  "author": "Croswil SRL",
+  "license": "SEE LICENSE IN LICENSE.txt",
   "authors": [
     "Croswil <info@croswil.com>"
   ],
-  "license": "ISC",
   "type": "module",
   "exports": {
     ".": {
@@ -38,6 +39,7 @@
     "#markuno_cad": "./bin/markcad.js"
   },
   "files": [
+    "LICENSE.txt",
     "bin/**",
     "types/**"
   ],