markuno_lib 1.2.40 → 1.2.41

package/bin/markcad.js

@@ -286,7 +286,7 @@ function sharpCorners(path,thresholdDeg=45){const result=[],n=path.length;if(n<3
          * @param {number} thresholdDeg - Angolo in gradi.
          * @returns {Array<{ index: number, point: {x:number,y:number}, angle: number }>}
          */
-segment(i,inverse=!1){let n=pt.length;return i<0&&(i+=n),new Linea2(pt[i%n],pt[(i+(inverse?-1:1))%n])},lineoffset(i1,i2,offset){if((i1=(i1||0)%pt.length)!=(i2=(i2||0)%pt.length)){let l2=new Linea2(pt[i1],pt[i2]);if(l2){return l2=l2.offsetline(-offset),this.intersectline(l2)}}},orientasplitter(){-1!=orientation()&&pt.reverse();let np=pt.length;for(let i=0;i<np;i++){let lt=new Linea2(pt[(np+i-1)%np],pt[i]);if(Math.abs(Math.abs(lt.angle)-Math.PI)<.001){i&&selezionaprimo(i);break}}return this},mirrorx(value=0){for(let p of pt)p.x=2*value-p.x;return this},mirrory(value=0){for(let p of pt)p.y=2*value-p.y;return this},simplify(tolerance,hq){return pt=simplify(pt,tolerance,hq),this},fromclip(vv){pt=[];for(let p of vv)pt.push({x:p.x/1e3,y:p.y/1e3});return this},infosegmento(i,open=!1){const n=pt.length;function clampIndex(idx){return(idx+n)%n}function angle(p1,p2){return Math.atan2(p2.y-p1.y,p2.x-p1.x)}function angleDiff(a,b){let diff=a-b;for(;diff>Math.PI;)diff-=2*Math.PI;for(;diff<-Math.PI;)diff+=2*Math.PI;return diff}const p1=pt[i];let p0,p2,p3;if(open)if(0===i){const dx=pt[1].x-pt[0].x,dy=pt[1].y-pt[0].y;p0={x:pt[0].x-dx,y:pt[0].y-dy},p2=pt[1],p3=pt[2]}else if(i===n-1){const dx=pt[n-1].x-pt[n-2].x,dy=pt[n-1].y-pt[n-2].y;p0=pt[n-2],p2={x:pt[n-1].x+dx,y:pt[n-1].y+dy},p3={x:p2.x+dx,y:p2.y+dy}}else p0=pt[i-1],p2=pt[i+1],p3=i+2<n?pt[i+2]:{x:pt[i+1].x+(pt[i+1].x-pt[i].x),y:pt[i+1].y+(pt[i+1].y-pt[i].y)};else{const i0=clampIndex(i-1),i2=clampIndex(i+1),i3=clampIndex(i+2);p0=pt[i0],p2=pt[i2],p3=pt[i3]}const ang12=angle(p1,p2),ang01=angle(p0,p1),ang23=angle(p2,p3);return{x:p1.x,y:p1.y,l:function length(p1,p2){const dx=p2.x-p1.x,dy=p2.y-p1.y;return Math.sqrt(dx*dx+dy*dy)}(p1,p2),ang:ang12/PIF,a1:angleDiff(ang12,ang01)/PIF,a2:angleDiff(ang23,ang12)/PIF}},swapxy(){for(let i=0;i<pt.length;i++){let q=pt[i].x;pt[i].x=-pt[i].y,pt[i].y=-q}return this},fromvec(aa){return pt=[],_addvec(aa),this},addvec(vec){return _addvec(vec),this},frompt(pts){return pt=[...pts],pt=removeduplicate(pt),this},fromdxfvec(verts){let points=[];if(verts&&verts.length)for(let i=0;i<verts.length;i++){let{x:x,y:y,bulge:bulge}=verts[i];if(points.push({x:x,y:y}),bulge){const step=1;let p1={x:x,y:y},p2=verts[(i+1)%verts.length],dx=p2.x-p1.x,dy=p2.y-p1.y,dist=Math.hypot(dx,dy);dist>step&&points.push(...dxfbulge(p1,p2,bulge,Math.floor((dist-step)/step)+1))}}return pt=points.map((e=>({x:Math.round(10*e.x)/10,y:Math.round(10*e.y)/10}))),pt=removeduplicate(pt),this},monotona(){let dxd=dims(pt),pp=pt.map((e=>({x:e.x-dxd.p2.x,y:e.y}))),xp=[];xp.push(pp[0]);let lastv=pp[0].y;for(let i=1;i<pp.length;i++)if(pp[i].y>lastv+1e-4||i==pp.length-1)xp.push(pp[i]),lastv=pp[i].y;else{const newv=lastv+1e-4;xp.push({x:pp[i].x,y:newv}),lastv=newv}return{sh:getshape().frompt(xp),...dxd}},sliceony(stag){let yvalues=stag.pt.map((e=>e.y)).slice(1,-1);const res=[],n=pt.length;let imin=0,yMin=pt[0].y;for(let i=1;i<n;i++)pt[i].y<yMin&&(yMin=pt[i].y,imin=i);const pts=[...pt.slice(imin),...pt.slice(0,imin)],m=pts.length,ymap=new Map;for(let i=0;i<m;i++)for(let y of yvalues)Math.abs(pts[i].y-y)<1e-5&&(ymap.has(y)?ymap.get(y).i2=i:ymap.set(y,{i1:i,i2:i}));const pairs=yvalues.map((y=>ymap.get(y))).filter((p=>p&&p.i1>=0&&p.i2>=0));pairs.length>0&&pairs[0].i1>0&&res.push([...pts.slice(0,pairs[0].i1+1),...pts.slice(pairs[0].i2,pairs[0].length)]);for(let i=0;i<pairs.length-1;i++){const a=pairs[i],b=pairs[i+1];res.push([...pts.slice(a.i1,b.i1+1),...pts.slice(b.i2,a.i2+1)])}const last=pairs[pairs.length-1];last.i2>last.i1&&res.push(pts.slice(last.i1,last.i2+1));return res.filter((arr=>arr.length>0))},splitshape(p,verticale=!0){const p1=verticale?{x:p.x,y:p.y-100}:{x:p.x-100,y:p.y},p2=verticale?{x:p.x,y:p.y+100}:{x:p.x+100,y:p.y},linea=this.intersectline(new Linea2(p1,p2));if(!linea)return null;const pstart=linea.p1,pend=linea.p2,findIndex=pt=>this.pt.findIndex(((v,i)=>new Linea2(v,this.pt[(i+1)%this.pt.length]).onsegment(pt))),i1=findIndex(pstart),i2=findIndex(pend);if(i1<0||i2<0)return null;const n=this.pt.length,loop=(a,b,p0,p1)=>{const res=[];for(let i=a;i!==b;i=(i+1)%n)res.push(this.pt[(i+1)%n]);return res},dx=getshape().frompt(loop(i1,i2));return{sx:getshape().frompt(loop(i2,i1)),dx:dx,linea:linea}},xfromy(y,valore0=0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.y<=y&&p2.y>=y||p2.y<=y&&p1.y>=y){const dy=p2.y-p1.y,t=dy?(y-p1.y)/dy:0,x=p1.x+t*(p2.x-p1.x);res.push(x)}else p1.y===y&&p2.y===y&&res.push(maggiore?Math.max(p1.x,p2.x):Math.min(p1.x,p2.x))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},yfromx(x,valore0=0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.x<=x&&p2.x>=x||p2.x<=x&&p1.x>=x){const dx=p2.x-p1.x,t=dx?(x-p1.x)/dx:0,y=p1.y+t*(p2.y-p1.y);res.push(y)}else p1.x===x&&p2.x===x&&res.push(maggiore?Math.max(p1.y,p2.y):Math.min(p1.y,p2.y))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},forcevalues(shape,verticale=!0,delta=1e-6){const sorted=[...new Set(shape.pt.map((e=>verticale?e.y:e.x)))].sort(((a,b)=>a-b)),newpt=[],n=pt.length;for(let i=0;i<n;i++){const p1=pt[i],p2=pt[(i+1)%n];newpt.push({...p1});let v1=verticale?p1.y:p1.x,v2=verticale?p2.y:p2.x;if(v1===v2)continue;const range=v2>v1?sorted.filter((v=>v>v1+delta&&v<v2-delta)):sorted.filter((v=>v<v1-delta&&v>v2+delta)).reverse();for(const v of range){const t=(v-v1)/(v2-v1),q={x:p1.x+t*(p2.x-p1.x),y:p1.y+t*(p2.y-p1.y)};newpt.push(q)}}return pt=newpt,this},fromrrect(w,h,r=10,sx=0,sy=0){return(r>=w/2||r>=h/2&&r<=0)&&(r=Math.round(Math.min(w/3,h/3))),fromstr(`0,0,r${r},${w},0,r${r},${w},${h},r${r},0,${h},r${r}`),(sx||sy)&&move(sx,sy),this},fromrect(w,h,sx,sy,bordo){w||(w=10),h||(h=10),bordo||(bordo=0),bordo=Math.min(Math.abs(bordo),Math.abs(.4*w),Math.abs(.4*h));let b1=w>0?bordo:-bordo,b2=h>0?bordo:-bordo;return pt=bordo?[{x:b1,y:0},{x:w-b1,y:0},{x:w,y:b2},{x:w,y:h-b2},{x:w-b1,y:h},{x:b1,y:h},{x:0,y:h-b2},{x:0,y:b2}]:[{x:0,y:0},{x:w,y:0},{x:w,y:h},{x:0,y:h}],this},intersectline:l=>function _intersectline(shape,p3,p4){let n=shape.length,l=new Linea2(p3,p4);const intersezioni=[];for(let i=0;i<shape.length;i++){let l2=new Linea2(shape[i],shape[(i+1)%n]),p=l2.interseca(l);p&&l2.onsegment(p)&&intersezioni.push(p)}if(intersezioni.length<2)return null;const{dx:dx,dy:dy}=l;intersezioni.sort(((a,b)=>(a.x-p3.x)*dx+(a.y-p3.y)*dy-((b.x-p3.x)*dx+(b.y-p3.y)*dy)));let pstart=new Punto2(intersezioni[0].x,intersezioni[0].y),pend=new Punto2(intersezioni[intersezioni.length-1].x,intersezioni[intersezioni.length-1].y);const vx1=pend.x-pstart.x,vy1=pend.y-pstart.y;return vx1*dx+vy1*dy<0&&([pstart,pend]=[pend,pstart]),new Linea2(pstart,pend)}(pt,l.p1,l.p2),tostr(dec=2){let dd=10**dec,pstr=x=>String(Math.round(x*dd)/dd),cl=pt.map((e=>`${pstr(e.x)};${pstr(e.y)};`)).join("");return cl&&cl.length?cl.slice(0,-1).match(/.{1,80}(;|$)/g).map((s=>s.trim())).join("\n"):""},addpt(pts){return pts?(Array.isArray(pts)||(pts=[pts]),pt=removeduplicate([...pt,...pts]),this):this},addracc(v1,v2,suddivisioni=2,addv1v2=!0){if(Array.isArray(v1)&&(v2={x:v1[2]||0,y:v1[3]||0},v1={x:v1[0]||0,y:v1[1]||0}),pt.length>=2){let tm=raccordabezier(pt[pt.length-2],pt[pt.length-1],v1,v2,suddivisioni);pt=[...pt,...tm],addv1v2&&(pt.push(v1),pt.push(v2))}return pt=removeduplicate(pt),this},setorient(mode){let p=orientation();return(1==p&&-1==mode||-1==p&&1==mode)&&pt.reverse(),this},reverse(){return pt.reverse(),this},pointinshape:p=>function isPointInPolygon(P){let x=P.x,y=P.y,inside=!1;for(let i=0,j=pt.length-1;i<pt.length;j=i++){let xi=pt[i].x,yi=pt[i].y,xj=pt[j].x,yj=pt[j].y;yi>y!=yj>y&&x<(xj-xi)*(y-yi)/(yj-yi)+xi&&(inside=!inside)}return inside}(p),azzera(){return pt=[],this},truncatebefore:function truncatebefore(linea){let s=new Linea2(pt[0],pt[1]),p=linea.interseca(s);if(p){let a=pt[0],b=pt[1],dx=b.x-a.x,dy=b.y-a.y,den=dx*dx+dy*dy;if(den){if(((p.x-a.x)*dx+(p.y-a.y)*dy)/den<=1)return pt[0]=p,this}}for(let i=1;i<pt.length-1;i++){let s=new Linea2(pt[i],pt[i+1]),p=linea.interseca(s);if(p&&s.onsegment(p))return pt=pt.slice(i),pt[0]=p,this}return this},truncateafter:function truncateafter(linea){let np=pt.length,s=new Linea2(pt[np-2],pt[np-1]),p=linea.interseca(s);if(p){let a=pt[np-2],b=pt[np-1],dx=b.x-a.x,dy=b.y-a.y,den=dx*dx+dy*dy;if(den){if(((p.x-a.x)*dx+(p.y-a.y)*dy)/den>=0)return pt[np-1]=p,this}}for(let i=np-3;i>=0;i--){let s=new Linea2(pt[i],pt[i+1]),p=linea.interseca(s);if(p&&s.onsegment(p))return pt=pt.slice(0,i+1),pt.push(p),this}return this},removeduplicate(delta=.005){return pt=removeduplicate(pt,delta),this},to3d(u0,alt=0,coeffa=0,coeffb=0,open=!1,sh=null,invert=!1){let tm=function to3dcoor(path,options){let{currentU:currentU=0,c:c=0,a:a=0,b:b=0,anglemin:anglemin=30,open:open=!1,sh:sh=null,invert:invert=!1}=options;const pointsWithNormals=[],n=path.length;for(let i=0;i<n;i++){const prev=path[(i-1+n)%n],current=path[i],next=path[(i+1)%n],vPrev={x:current.x-prev.x,y:current.y-prev.y},vNext={x:next.x-current.x,y:next.y-current.y},normalPrev=normal2(prev,current),normalNext=normal2(current,next),angle=angle2vec(vPrev,vNext);let z=a*current.x+b*current.y+c;if(sh){let t=sh.xfromy(current.y,0,!0);invert?z+=t:z-=t}Math.abs(angle-180)<=anglemin?(normalPrev.nx,normalNext.nx,normalPrev.ny,normalNext.ny,pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z})):(pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}),pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}));const dx=next.x-current.x,dy=next.y-current.y;currentU+=Math.sqrt(dx*dx+dy*dy)}if(!open){let p=pointsWithNormals[0],pf=pointsWithNormals[pointsWithNormals.length-1];p.x==pf.x&&p.y==pf.y||pointsWithNormals.push({x:p.x,y:p.y,z:p.z,nx:p.nx,ny:p.ny,nz:p.nz,u:currentU,v:p.z})}return pointsWithNormals}(pt,{open:open,currentU:u0,c:alt,a:coeffa,b:coeffb,anglemin:30,sh:sh,invert:invert});return tm},getboundbox:()=>pt.length?pt.reduce(((box,p)=>(box.p1.x=Math.min(box.p1.x,p.x),box.p1.y=Math.min(box.p1.y,p.y),box.p2.x=Math.max(box.p2.x,p.x),box.p2.y=Math.max(box.p2.y,p.y),box)),{p1:new Punto2(1/0,1/0),p2:new Punto2(-1/0,-1/0)}):{p1:new Punto2(0,0),p2:new Punto2(0,0)},fittobox(p1,p2){if(!pt.length)return this;const currentBox=this.getboundbox(),currentWidth=currentBox.p2.x-currentBox.p1.x,currentHeight=currentBox.p2.y-currentBox.p1.y,targetWidth=p2.x-p1.x,targetHeight=p2.y-p1.y,scale=Math.min(targetWidth/(currentWidth||1),targetHeight/(currentHeight||1));for(let p of pt)p.x=(p.x-currentBox.p1.x)*scale,p.y=(p.y-currentBox.p1.y)*scale,p.x+=p1.x,p.y+=p1.y;return this}}}
+segment(i,inverse=!1){let n=pt.length;return i<0&&(i+=n),new Linea2(pt[i%n],pt[(i+(inverse?-1:1))%n])},lineoffset(i1,i2,offset){if((i1=(i1||0)%pt.length)!=(i2=(i2||0)%pt.length)){let l2=new Linea2(pt[i1],pt[i2]);if(l2){return l2=l2.offsetline(-offset),this.intersectline(l2)}}},orientasplitter(){-1!=orientation()&&pt.reverse();let np=pt.length;for(let i=0;i<np;i++){let lt=new Linea2(pt[(np+i-1)%np],pt[i]);if(Math.abs(Math.abs(lt.angle)-Math.PI)<.001){i&&selezionaprimo(i);break}}return this},mirrorx(value=0){for(let p of pt)p.x=2*value-p.x;return this},mirrory(value=0){for(let p of pt)p.y=2*value-p.y;return this},simplify(tolerance,hq){return pt=simplify(pt,tolerance,hq),this},fromclip(vv){pt=[];for(let p of vv)pt.push({x:p.x/1e3,y:p.y/1e3});return this},infosegmento(i,open=!1){const n=pt.length;function clampIndex(idx){return(idx+n)%n}function angle(p1,p2){return Math.atan2(p2.y-p1.y,p2.x-p1.x)}function angleDiff(a,b){let diff=a-b;for(;diff>Math.PI;)diff-=2*Math.PI;for(;diff<-Math.PI;)diff+=2*Math.PI;return diff}const p1=pt[i];let p0,p2,p3;if(open)if(0===i){const dx=pt[1].x-pt[0].x,dy=pt[1].y-pt[0].y;p0={x:pt[0].x-dx,y:pt[0].y-dy},p2=pt[1],p3=2==n?{x:pt[1].x+dx,y:pt[1].y+dy}:pt[2]}else if(i===n-1){const dx=pt[n-1].x-pt[n-2].x,dy=pt[n-1].y-pt[n-2].y;p0=pt[n-2],p2={x:pt[n-1].x+dx,y:pt[n-1].y+dy},p3={x:p2.x+dx,y:p2.y+dy}}else p0=pt[i-1],p2=pt[i+1],p3=i+2<n?pt[i+2]:{x:pt[i+1].x+(pt[i+1].x-pt[i].x),y:pt[i+1].y+(pt[i+1].y-pt[i].y)};else{const i0=clampIndex(i-1),i2=clampIndex(i+1),i3=clampIndex(i+2);p0=pt[i0],p2=pt[i2],p3=pt[i3]}const ang12=angle(p1,p2),ang01=angle(p0,p1),ang23=angle(p2,p3);return{x:p1.x,y:p1.y,l:function length(p1,p2){const dx=p2.x-p1.x,dy=p2.y-p1.y;return Math.sqrt(dx*dx+dy*dy)}(p1,p2),ang:ang12/PIF,a1:angleDiff(ang12,ang01)/PIF,a2:angleDiff(ang23,ang12)/PIF}},swapxy(){for(let i=0;i<pt.length;i++){let q=pt[i].x;pt[i].x=-pt[i].y,pt[i].y=-q}return this},fromvec(aa){return pt=[],_addvec(aa),this},addvec(vec){return _addvec(vec),this},frompt(pts){return pt=[...pts],pt=removeduplicate(pt),this},fromdxfvec(verts){let points=[];if(verts&&verts.length)for(let i=0;i<verts.length;i++){let{x:x,y:y,bulge:bulge}=verts[i];if(points.push({x:x,y:y}),bulge){const step=1;let p1={x:x,y:y},p2=verts[(i+1)%verts.length],dx=p2.x-p1.x,dy=p2.y-p1.y,dist=Math.hypot(dx,dy);dist>step&&points.push(...dxfbulge(p1,p2,bulge,Math.floor((dist-step)/step)+1))}}return pt=points.map((e=>({x:Math.round(10*e.x)/10,y:Math.round(10*e.y)/10}))),pt=removeduplicate(pt),this},monotona(){let dxd=dims(pt),pp=pt.map((e=>({x:e.x-dxd.p2.x,y:e.y}))),xp=[];xp.push(pp[0]);let lastv=pp[0].y;for(let i=1;i<pp.length;i++)if(pp[i].y>lastv+1e-4||i==pp.length-1)xp.push(pp[i]),lastv=pp[i].y;else{const newv=lastv+1e-4;xp.push({x:pp[i].x,y:newv}),lastv=newv}return{sh:getshape().frompt(xp),...dxd}},sliceony(stag){let yvalues=stag.pt.map((e=>e.y)).slice(1,-1);const res=[],n=pt.length;let imin=0,yMin=pt[0].y;for(let i=1;i<n;i++)pt[i].y<yMin&&(yMin=pt[i].y,imin=i);const pts=[...pt.slice(imin),...pt.slice(0,imin)],m=pts.length,ymap=new Map;for(let i=0;i<m;i++)for(let y of yvalues)Math.abs(pts[i].y-y)<1e-5&&(ymap.has(y)?ymap.get(y).i2=i:ymap.set(y,{i1:i,i2:i}));const pairs=yvalues.map((y=>ymap.get(y))).filter((p=>p&&p.i1>=0&&p.i2>=0));pairs.length>0&&pairs[0].i1>0&&res.push([...pts.slice(0,pairs[0].i1+1),...pts.slice(pairs[0].i2,pairs[0].length)]);for(let i=0;i<pairs.length-1;i++){const a=pairs[i],b=pairs[i+1];res.push([...pts.slice(a.i1,b.i1+1),...pts.slice(b.i2,a.i2+1)])}const last=pairs[pairs.length-1];last.i2>last.i1&&res.push(pts.slice(last.i1,last.i2+1));return res.filter((arr=>arr.length>0))},splitshape(p,verticale=!0){const p1=verticale?{x:p.x,y:p.y-100}:{x:p.x-100,y:p.y},p2=verticale?{x:p.x,y:p.y+100}:{x:p.x+100,y:p.y},linea=this.intersectline(new Linea2(p1,p2));if(!linea)return null;const pstart=linea.p1,pend=linea.p2,findIndex=pt=>this.pt.findIndex(((v,i)=>new Linea2(v,this.pt[(i+1)%this.pt.length]).onsegment(pt))),i1=findIndex(pstart),i2=findIndex(pend);if(i1<0||i2<0)return null;const n=this.pt.length,loop=(a,b,p0,p1)=>{const res=[];for(let i=a;i!==b;i=(i+1)%n)res.push(this.pt[(i+1)%n]);return res},dx=getshape().frompt(loop(i1,i2));return{sx:getshape().frompt(loop(i2,i1)),dx:dx,linea:linea}},xfromy(y,valore0=0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.y<=y&&p2.y>=y||p2.y<=y&&p1.y>=y){const dy=p2.y-p1.y,t=dy?(y-p1.y)/dy:0,x=p1.x+t*(p2.x-p1.x);res.push(x)}else p1.y===y&&p2.y===y&&res.push(maggiore?Math.max(p1.x,p2.x):Math.min(p1.x,p2.x))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},yfromx(x,valore0=0,maggiore=!0){const res=[],n=this.pt.length;for(let i=0;i<n-1;i++){const p1=this.pt[i],p2=this.pt[i+1];if(p1.x<=x&&p2.x>=x||p2.x<=x&&p1.x>=x){const dx=p2.x-p1.x,t=dx?(x-p1.x)/dx:0,y=p1.y+t*(p2.y-p1.y);res.push(y)}else p1.x===x&&p2.x===x&&res.push(maggiore?Math.max(p1.y,p2.y):Math.min(p1.y,p2.y))}return res.length?maggiore?Math.max(...res):Math.min(...res):valore0},forcevalues(shape,verticale=!0,delta=1e-6){const sorted=[...new Set(shape.pt.map((e=>verticale?e.y:e.x)))].sort(((a,b)=>a-b)),newpt=[],n=pt.length;for(let i=0;i<n;i++){const p1=pt[i],p2=pt[(i+1)%n];newpt.push({...p1});let v1=verticale?p1.y:p1.x,v2=verticale?p2.y:p2.x;if(v1===v2)continue;const range=v2>v1?sorted.filter((v=>v>v1+delta&&v<v2-delta)):sorted.filter((v=>v<v1-delta&&v>v2+delta)).reverse();for(const v of range){const t=(v-v1)/(v2-v1),q={x:p1.x+t*(p2.x-p1.x),y:p1.y+t*(p2.y-p1.y)};newpt.push(q)}}return pt=newpt,this},fromrrect(w,h,r=10,sx=0,sy=0){return(r>=w/2||r>=h/2&&r<=0)&&(r=Math.round(Math.min(w/3,h/3))),fromstr(`0,0,r${r},${w},0,r${r},${w},${h},r${r},0,${h},r${r}`),(sx||sy)&&move(sx,sy),this},fromrect(w,h,sx,sy,bordo){w||(w=10),h||(h=10),bordo||(bordo=0),bordo=Math.min(Math.abs(bordo),Math.abs(.4*w),Math.abs(.4*h));let b1=w>0?bordo:-bordo,b2=h>0?bordo:-bordo;return pt=bordo?[{x:b1,y:0},{x:w-b1,y:0},{x:w,y:b2},{x:w,y:h-b2},{x:w-b1,y:h},{x:b1,y:h},{x:0,y:h-b2},{x:0,y:b2}]:[{x:0,y:0},{x:w,y:0},{x:w,y:h},{x:0,y:h}],this},intersectline:l=>function _intersectline(shape,p3,p4){let n=shape.length,l=new Linea2(p3,p4);const intersezioni=[];for(let i=0;i<shape.length;i++){let l2=new Linea2(shape[i],shape[(i+1)%n]),p=l2.interseca(l);p&&l2.onsegment(p)&&intersezioni.push(p)}if(intersezioni.length<2)return null;const{dx:dx,dy:dy}=l;intersezioni.sort(((a,b)=>(a.x-p3.x)*dx+(a.y-p3.y)*dy-((b.x-p3.x)*dx+(b.y-p3.y)*dy)));let pstart=new Punto2(intersezioni[0].x,intersezioni[0].y),pend=new Punto2(intersezioni[intersezioni.length-1].x,intersezioni[intersezioni.length-1].y);const vx1=pend.x-pstart.x,vy1=pend.y-pstart.y;return vx1*dx+vy1*dy<0&&([pstart,pend]=[pend,pstart]),new Linea2(pstart,pend)}(pt,l.p1,l.p2),tostr(dec=2){let dd=10**dec,pstr=x=>String(Math.round(x*dd)/dd),cl=pt.map((e=>`${pstr(e.x)};${pstr(e.y)};`)).join("");return cl&&cl.length?cl.slice(0,-1).match(/.{1,80}(;|$)/g).map((s=>s.trim())).join("\n"):""},addpt(pts){return pts?(Array.isArray(pts)||(pts=[pts]),pt=removeduplicate([...pt,...pts]),this):this},addracc(v1,v2,suddivisioni=2,addv1v2=!0){if(Array.isArray(v1)&&(v2={x:v1[2]||0,y:v1[3]||0},v1={x:v1[0]||0,y:v1[1]||0}),pt.length>=2){let tm=raccordabezier(pt[pt.length-2],pt[pt.length-1],v1,v2,suddivisioni);pt=[...pt,...tm],addv1v2&&(pt.push(v1),pt.push(v2))}return pt=removeduplicate(pt),this},setorient(mode){let p=orientation();return(1==p&&-1==mode||-1==p&&1==mode)&&pt.reverse(),this},reverse(){return pt.reverse(),this},pointinshape:p=>function isPointInPolygon(P){let x=P.x,y=P.y,inside=!1;for(let i=0,j=pt.length-1;i<pt.length;j=i++){let xi=pt[i].x,yi=pt[i].y,xj=pt[j].x,yj=pt[j].y;yi>y!=yj>y&&x<(xj-xi)*(y-yi)/(yj-yi)+xi&&(inside=!inside)}return inside}(p),azzera(){return pt=[],this},truncatebefore:function truncatebefore(linea){let s=new Linea2(pt[0],pt[1]),p=linea.interseca(s);if(p){let a=pt[0],b=pt[1],dx=b.x-a.x,dy=b.y-a.y,den=dx*dx+dy*dy;if(den){if(((p.x-a.x)*dx+(p.y-a.y)*dy)/den<=1)return pt[0]=p,this}}for(let i=1;i<pt.length-1;i++){let s=new Linea2(pt[i],pt[i+1]),p=linea.interseca(s);if(p&&s.onsegment(p))return pt=pt.slice(i),pt[0]=p,this}return this},truncateafter:function truncateafter(linea){let np=pt.length,s=new Linea2(pt[np-2],pt[np-1]),p=linea.interseca(s);if(p){let a=pt[np-2],b=pt[np-1],dx=b.x-a.x,dy=b.y-a.y,den=dx*dx+dy*dy;if(den){if(((p.x-a.x)*dx+(p.y-a.y)*dy)/den>=0)return pt[np-1]=p,this}}for(let i=np-3;i>=0;i--){let s=new Linea2(pt[i],pt[i+1]),p=linea.interseca(s);if(p&&s.onsegment(p))return pt=pt.slice(0,i+1),pt.push(p),this}return this},removeduplicate(delta=.005){return pt=removeduplicate(pt,delta),this},to3d(u0,alt=0,coeffa=0,coeffb=0,open=!1,sh=null,invert=!1){let tm=function to3dcoor(path,options){let{currentU:currentU=0,c:c=0,a:a=0,b:b=0,anglemin:anglemin=30,open:open=!1,sh:sh=null,invert:invert=!1}=options;const pointsWithNormals=[],n=path.length;for(let i=0;i<n;i++){const prev=path[(i-1+n)%n],current=path[i],next=path[(i+1)%n],vPrev={x:current.x-prev.x,y:current.y-prev.y},vNext={x:next.x-current.x,y:next.y-current.y},normalPrev=normal2(prev,current),normalNext=normal2(current,next),angle=angle2vec(vPrev,vNext);let z=a*current.x+b*current.y+c;if(sh){let t=sh.xfromy(current.y,0,!0);invert?z+=t:z-=t}Math.abs(angle-180)<=anglemin?(normalPrev.nx,normalNext.nx,normalPrev.ny,normalNext.ny,pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z})):(pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}),pointsWithNormals.push({x:current.x,y:-current.y,z:z,u:currentU,v:z}));const dx=next.x-current.x,dy=next.y-current.y;currentU+=Math.sqrt(dx*dx+dy*dy)}if(!open){let p=pointsWithNormals[0],pf=pointsWithNormals[pointsWithNormals.length-1];p.x==pf.x&&p.y==pf.y||pointsWithNormals.push({x:p.x,y:p.y,z:p.z,nx:p.nx,ny:p.ny,nz:p.nz,u:currentU,v:p.z})}return pointsWithNormals}(pt,{open:open,currentU:u0,c:alt,a:coeffa,b:coeffb,anglemin:30,sh:sh,invert:invert});return tm},getboundbox:()=>pt.length?pt.reduce(((box,p)=>(box.p1.x=Math.min(box.p1.x,p.x),box.p1.y=Math.min(box.p1.y,p.y),box.p2.x=Math.max(box.p2.x,p.x),box.p2.y=Math.max(box.p2.y,p.y),box)),{p1:new Punto2(1/0,1/0),p2:new Punto2(-1/0,-1/0)}):{p1:new Punto2(0,0),p2:new Punto2(0,0)},fittobox(p1,p2){if(!pt.length)return this;const currentBox=this.getboundbox(),currentWidth=currentBox.p2.x-currentBox.p1.x,currentHeight=currentBox.p2.y-currentBox.p1.y,targetWidth=p2.x-p1.x,targetHeight=p2.y-p1.y,scale=Math.min(targetWidth/(currentWidth||1),targetHeight/(currentHeight||1));for(let p of pt)p.x=(p.x-currentBox.p1.x)*scale,p.y=(p.y-currentBox.p1.y)*scale,p.x+=p1.x,p.y+=p1.y;return this}}}
 /**
  * Calcola i punti di un arco passante per tre punti
  * @param {number} segments - Numero di segmenti (punti-1)
@@ -504,7 +504,7 @@ ClipperLib.ExPolygon=function(){this.outer=null,this.holes=null},ClipperLib.JS.A
  * @property {Function} inflate - Espande o contrae una forma
  * @property {Function} unisci - Unisce più forme con gestione di fori e tagli
  */
-function alignByMinDist(sag1,sag2,isopen){const n1=sag1.length,n2=sag2.length;if(n1<1||n2<1)return sag2.slice();let bestOffset=0,minSum=1/0;for(let k=0;k<n2;k++){const p0=sag1[0],q0=sag2[k%n2],dx0=p0.x-q0.x,dy0=p0.y-q0.y,p1=sag1[n1-1],q1=sag2[isopen?Math.min(k+n1-1,n2-1):(k+n1-1)%n2],dx1=p1.x-q1.x,dy1=p1.y-q1.y,sum=dx0*dx0+dy0*dy0+dx1*dx1+dy1*dy1;sum<minSum&&(minSum=sum,bestOffset=k)}return[...sag2.slice(bestOffset),...sag2.slice(0,bestOffset)]}function shapeclip(){function toclipformat(pts){let tm=pts.map((e=>({X:Math.round(1e4*e.x),Y:Math.round(1e4*e.y)})));return ensureOrientation(tm)}function fromclipformat(pts){return pts.map((e=>({x:e.X/1e4,y:e.Y/1e4})))}const ensureOrientation=poly=>ClipperLib.Clipper.Orientation(poly)?poly:poly.slice().reverse();function orientation(pt){if(!pt.length)return 0;let area=0;const n=pt.length;for(let i=0;i<n;i++){const current=pt[i],next=pt[(i+1)%n];area+=current.X*next.Y-next.X*current.Y}return area>0?1:area<0?-1:0}const _inflate=(pt,delta,cut=!1)=>{const co=new ClipperLib.ClipperOffset;co.MiterLimit=4,co.AddPath(pt,ClipperLib.JoinType.jtMiter,cut||2==pt.length?ClipperLib.EndType.etOpenButt:ClipperLib.EndType.etClosedPolygon);const solution=new ClipperLib.Paths;return co.Execute(solution,delta),solution};function _inflateopen(pts,delta){const co=new ClipperLib.ClipperOffset;co.MiterLimit=4,co.ArcTolerance=.25;const DD=1e4*delta,pshape=toclipformat(pts);co.AddPath(pshape,ClipperLib.JoinType.jtMiter,ClipperLib.EndType.etClosedPolygon);const solution=new ClipperLib.Paths;co.Execute(solution,DD);let tm=fromclipformat(solution[0]);return getshape().frompt(tm)}return{offset(shape,delta,full=!1){const co=new ClipperLib.ClipperOffset;co.MiterLimit=4,co.ArcTolerance=.25;const DD=1e4*Math.abs(delta),pshape=toclipformat(shape.pt);co.AddPath(pshape,ClipperLib.JoinType.jtMiter,ClipperLib.EndType.etOpenButt);const solution=new ClipperLib.Paths;co.Execute(solution,DD);let tm=fromclipformat(solution[0]);return full?getshape().frompt(tm):getshape().frompt(getptsoffset(shape.pt,tm,delta))},inflate:function inflate(shape,delta=2,mantainorder=!1,isopen=0){let pshape=toclipformat(shape.pt),tm=_inflate(pshape,1e4*delta);if(!tm||!tm.length)return getshape().frompt([]);let p2=getshape().frompt(fromclipformat(tm[0]));if(mantainorder){p2.orient!=shape.orient&&p2.reverse();let p3=alignByMinDist(shape.pt,p2.pt,isopen);if(p2.frompt(p3),isopen>0&&shape.pt.length>=3){function estendi1(sh1,sh2){let l1=sh1.segment(0).ruotata(-Math.PI/2,200,!0),l2=sh1.segment(-2).ruotata(-Math.PI/2,200),q2=sh2.segment(-2).interseca(l2),q1=sh2.segment(0).interseca(l1);q1&&(sh2.pt[0]=q1),q2&&(sh2.pt[sh2.pt.length-1]=q2)}function estendi2(sh1,sh2){let lfin=sh1.segment(-1),l2=sh2.segment(0),q1=lfin.interseca(l2);q1&&(sh2.pt[0]=q1),l2=sh2.segment(-2);let q2=lfin.interseca(l2);q2&&(sh2.pt[sh2.pt.length-1]=q2)}1==isopen?estendi1(shape,p2):estendi2(shape,p2)}}return p2},inflateopen:_inflateopen,inflateclose(shape,delta){let p2=_inflateopen(shape.pt,delta);p2.orient!=shape.orient&&p2.reverse();let p3=alignByMinDist(shape.pt,p2.pt,0);return p2.frompt(p3),p2},inflatecornici(shape,delta=2,linetruncateini,linetruncateend){let l1=new Linea2(shape.pt[0],shape.pt[shape.npt-1]),len1=l1.len,l2=l1.perpendicolare(l1.p1,len1),l3=l1.perpendicolare(l1.p2,len1);l2.isparallela(shape.segment(0))&&(l2=l1.perpendicolare(l1.puntot(.1),len1)),l3.isparallela(shape.segment(shape.npt-2))&&(l3=l1.perpendicolare(l1.puntot(.9),len1));let n2=Math.floor(shape.npt/2),{t:t}=l2.proiezionet(shape.pt[n2]),t2=2*(t>0?-1:1),px2=l2.puntot(t2),px3=l3.puntot(t2),p2=_inflateopen([...shape.pt,px3,px2],delta),idx=p2.pt.reduce(((imin,p,i)=>(p.x-px2.x)**2+(p.y-px2.y)**2<(p2.pt[imin].x-px2.x)**2+(p2.pt[imin].y-px2.y)**2?i:imin),0);return p2.pt=p2.pt.slice(idx+2).concat(p2.pt.slice(0,idx)),p2.orient!=shape.orient&&p2.reverse(),linetruncateini&&(shape.truncatebefore(linetruncateini),p2.truncatebefore(linetruncateini)),linetruncateend&&(p2.truncateafter(linetruncateend),shape.truncateafter(linetruncateend)),p2},intersecasplitter(areabase,forma1){const clipper=new ClipperLib.Clipper,pt1=[toclipformat(forma1.pt)],pt2=[toclipformat(areabase.pt)];clipper.AddPaths(pt1,ClipperLib.PolyType.ptSubject,!0),clipper.AddPaths(pt2,ClipperLib.PolyType.ptClip,!0);const solution=new ClipperLib.Paths;let res;if(clipper.Execute(ClipperLib.ClipType.ctIntersection,solution,ClipperLib.PolyFillType.pftNonZero,ClipperLib.PolyFillType.pftNonZero)&&solution.length>0){const path=solution[0];if(1===orientation(path)){res=getshape().frompt(fromclipformat(path)),res.orient!=forma1.orient&&res.reverse();for(let iu=0;iu<forma1.pt.length;iu++){let p2=forma1.pt[iu],id=res.pt.findIndex((p=>Math.abs(p.x-p2.x)<.01&&Math.abs(p.y-p2.y)<.01));if(id>0){id-=iu,0!=id&&res.selezionaprimo(id);break}}}}return res},offsetpts(pts,delta=.01){const DELTA=1e4*delta;let tm=_inflate(toclipformat(pts),DELTA);if(tm&&tm.length)return fromclipformat(tm[0])},areesplitter(shapept,clipspt,useInflatedClipping=!0){if(!Array.isArray(shapept)||shapept.length<3)return;if(!clipspt||0==clipspt.length)return[shapept];const subj=new ClipperLib.Paths,clip=new ClipperLib.Paths;let shape_in=useInflatedClipping?_inflate(toclipformat(shapept),-100):[toclipformat(shapept)],clips_in=useInflatedClipping?clipspt.flatMap((c=>_inflate(toclipformat(c),100))):clipspt.map((c=>toclipformat(c)));for(let s of shape_in)subj.push(s);for(let c of clips_in)clip.push(c);const clipper=new ClipperLib.Clipper;clipper.AddPaths(subj,ClipperLib.PolyType.ptSubject,!0),clipper.AddPaths(clip,ClipperLib.PolyType.ptClip,!0);const solution=new ClipperLib.Paths;if(!clipper.Execute(ClipperLib.ClipType.ctDifference,solution,ClipperLib.PolyFillType.pftNonZero,ClipperLib.PolyFillType.pftNonZero))return;let res=[];for(let x of solution)if(useInflatedClipping){const restored=_inflate(x,100);for(const r of restored)1===orientation(r)&&res.push(fromclipformat(r))}else if(x.length>4&&1==orientation(x)){const cleaned=_inflate(x,-100);if(cleaned.length>0)for(let cc of cleaned){const restored=_inflate(cc,100);for(const rr of restored)1===orientation(rr)&&res.push(fromclipformat(rr))}}else 1==orientation(x)&&res.push(fromclipformat(x));return res},unisci(shapes,holes,cuts){const subj=new ClipperLib.Paths,clip=new ClipperLib.Paths;for(let hh of shapes){let h2=[toclipformat(hh.pt)];for(let h of h2)subj.push(h)}if(holes&&holes.length)for(let hh of holes){let h1=toclipformat(hh.pt);clip.push(h1)}if(cuts&&cuts.length)for(let hh of cuts){let h1=toclipformat(hh.pt),h2=_inflate(h1,1,!0);for(let h of h2)clip.push(h)}const clipper=new ClipperLib.Clipper;clipper.AddPaths(subj,ClipperLib.PolyType.ptSubject,!0),clipper.AddPaths(clip,ClipperLib.PolyType.ptClip,!0);const solution=new ClipperLib.Paths;if(clipper.Execute(ClipperLib.ClipType.ctDifference,solution,ClipperLib.PolyFillType.pftNonZero,ClipperLib.PolyFillType.pftNonZero)){let res=[],holes=[];for(let x of solution)if(1==orientation(x)){let yy=[x];for(let y of yy)res.push({shape:getshape().frompt(fromclipformat(y)),holes:[]})}else holes.push(getshape().frompt(fromclipformat(x)));for(let h of holes)for(let s of res)if(s.shape.pointinshape(h.pt[0])){s.holes.push(h);break}return res}return[]}}}class Vis2d{constructor(name,scalalinea=1){this.name=name,this.clear(scalalinea)}clear(scalalinea=1){return this.vec=[],this.gr={},this._sl=scalalinea,this}creategr(name="grp"){return this.gr[name]||(this.gr[name]=new Vis2d(name,this._sl)),this.gr[name]}push(x=0,y=0,op={}){"number"==typeof op&&(op={rot:op}),op||(op={}),this.vec.push({type:"push",x:x,y:y,op:op})}pop(){this.vec.push({type:"pop"})}randomcolor(transp="100%"){return`hsl(${Math.floor(360*Math.random())}, 50%, 40%,${transp})`}addgr(gr){let name=gr;gr?.name&&(name=gr.name),this.gr[name]?this.vec.push({type:"group",name:name}):this.vec.push({type:"err",err:`addgroup: ${name} => missing`})}addquota(x1,y1,x2,y2,d=0,text="",scalafont=1,spessore=.25){this.vec.push({type:"quota",x1:x1,y1:y1,x2:x2,y2:y2,d:d,text:text,spessore:spessore,color:"black",scalafont:scalafont})}addqpunto(x1,y1,x2,y2,d=0,text="",scalafont=1,spessore=.25){this.vec.push({type:"qpunto",x1:x1,y1:y1,x2:x2,y2:y2,d:d,text:text,spessore:spessore,color:"black",scalafont:scalafont})}addpoint(p,id=-1,color="red",spessore=8){return p&&this.vec.push({type:"point",p:p,id:id,color:color,spessore:spessore*this._sl}),this}addline(l,id=-1,color=void 0,spessore=1){return l&&this.vec.push({type:"line",l:l,id:id,color:color,spessore:spessore*this._sl}),this}addrect(l,id=-1,color=void 0,spessore=1){return l&&this.vec.push({type:"rect",l:l,id:id,color:color,spessore:spessore*this._sl}),this}addrecta(l,id=-1,color=void 0){return l&&this.vec.push({type:"recta",l:l,id:id,color:color,spessore:0}),this}addshape(s,color=void 0,spessore=1){return s&&this.vec.push({type:"shape",s:s,color:color||this.randomcolor(),spessore:spessore*this._sl}),this}addshapelin(s,color=void 0,spessore=1){return s&&this.vec.push({type:"shapelin",s:s,color:color||this.randomcolor(),spessore:spessore*this._sl}),this}addarea(s,color=void 0){return s&&this.vec.push({type:"area",s:s,color:color||this.randomcolor()}),this}addoffset(x,y){return this.vec.push({type:"offset",x:x||0,y:y||0}),this}}function checkoggetto(oggetti,tipo,cod,isrect){if("h"==tipo&&(tipo="o"),oggetti||(oggetti=[]),"number"==typeof cod&&!["a","as"].includes(tipo))return{cod:"__",macro:"",sps:cod};let bb=oggetti.find((e=>e.tipo.includes(tipo)&&e.cod==cod&&(e.isshape||isrect||"a"!=tipo)));return bb||(bb=oggetti.find((e=>e.tipo.includes(tipo)&&(e.isshape||isrect||"a"!=tipo)))),bb||(bb={cod:"__",macro:"",sps:0}),"a"!=tipo&&"as"!=tipo||"__"==bb.cod||bb.color||(bb.color=`hsl(${function stringToHue(str){let hash=0;for(let i=0;i<str.length;i++)hash=31*hash+str.charCodeAt(i)>>>0;return Math.floor(.6180339887*hash%1*360)}(bb.cod)}, 95%, 97%`),bb}function getbordi(oggetti,bordo){let bordi,uguali=!1;if(Array.isArray(bordo)){bordo.length=4;let b0=bordo[0]||"";bordi=bordo.map((b=>checkoggetto(oggetti,"b",b||b0))),uguali=bordi.every((b=>b.sps===bordi[0].sps))}else{let tm=checkoggetto(oggetti,"b",bordo);bordi=[tm,tm,tm,tm],uguali=!0}return{bordi:bordi,uguali:uguali,senza:!(bordi[0].sps||bordi[1].sps||bordi[2].sps||bordi[3].sps),bl:bordi[0].sps,bt:bordi[1].sps,br:bordi[2].sps,bb:bordi[3].sps}}function elaborapercorso(sh1,bordo,taglio,oggetti,countid=0){let sh2,sh3,p1h,p2h,p3h,p4h,p1v,p2v,p3v,p4v,p1s,p2s,line1,line2,i1,i2,dati=[],draws=[];function eseguipezzo(l1,l2,bordo,shape){let info=l1.infoquad(l2);if(info&&info.distanza){let s0=getshape().frompt(shape||[l1.p1,l1.p2,l2.p2,l2.p1]),s1=s0.clone();(info.sx||info.sy)&&s1.move(-info.sx||0,-info.sy||0),info.angle&&s1.rotate(-info.angle||0);let tm={id:++countid,type:`b${bordo}`,info:info};shape&&(tm.shape=s1.pt),draws.push({type:`b${bordo}`,pt:s0.pt}),dati.push(tm)}}countid=countid||0;let np=sh1.pt.length,idr=np-1;oggetti||(oggetti=[]);let{bordi:bordi,uguali:uguali,senza:senza}=getbordi(oggetti,bordo);if(uguali)if(senza||!bordi[0].sps)sh2=sh1.clone();else{let b=bordi[0].sps;sh2=shapeclip().inflate(sh1,-b,!0)}else{let b,ll=[],pp=[];for(let i=0;i<np;i++){b=0==i?bordi[0].sps:i==idr-1?bordi[2].sps:i==idr?bordi[3].sps:bordi[1].sps,"number"!=typeof b&&(b=0);let l=sh1.segment(i).offset(-b);ll.push(l)}for(let i=0;i<np;i++){let p=ll[i].interseca(ll[(i-1+np)%np]);pp.push(p)}sh2=getshape().frompt(pp)}if(!senza){p1h=sh2.segment(idr).interseca(sh1.segment(0)),p2h=sh2.segment(1).interseca(sh1.segment(0)),p3h=sh1.segment(idr-1).interseca(sh2.segment(idr-2)),p4h=sh1.segment(idr-1).interseca(sh2.segment(idr)),p1v=sh1.segment(idr).interseca(sh2.segment(0)),p2v=sh1.segment(1).interseca(sh2.segment(0)),p3v=sh1.segment(idr-2).interseca(sh2.segment(idr-1)),p4v=sh1.segment(idr).interseca(sh2.segment(idr-1)),i1=1,i2=idr-2,line1=sh2.segment(0),line2=sh2.segment(idr-1);for(let i=1;i<idr-1;i++){let l=sh1.segment(i),p=l.interseca(line1);p&&l.onsegment(p)&&(i1=i,p2v=p),p=l.interseca(line2),p&&l.onsegment(p)&&(i2=i,p3v=p)}i1-=1,i2=idr-2-i2;let p1=sh1.pt[0],p2=sh2.pt[0],p3=sh2.pt[idr],p4=sh1.pt[idr];switch(taglio[0]){case"v":eseguipezzo(new Linea2(p4v,p1v),sh2.segment(idr),3),p2=p1v,p3=p4v;break;case"o":eseguipezzo(sh1.segment(idr),new Linea2(p4h,p1h),3),p1=p1h,p4=p4h;break;default:eseguipezzo(sh1.segment(idr),sh2.segment(idr),3)}switch(p1s=sh1.pt.slice(1,idr),p2s=sh2.pt.slice(1,idr),taglio[1]){case"v":eseguipezzo(new Linea2(p1,sh1.pt[1]),new Linea2(p2,p2v),0),eseguipezzo(new Linea2(sh1.pt[idr-1],p4),new Linea2(p3v,p3),2),i1&&(p1s=p1s.slice(i1)),i2&&(p1s=p1s.slice(0,-i2)),p1s[0]=p2v,p1s[p1s.length-1]=p3v;break;case"o":eseguipezzo(new Linea2(p1,p2h),new Linea2(p2,sh2.pt[1]),0),eseguipezzo(new Linea2(p3h,p4),new Linea2(sh2.pt[idr-1],p3),2),p2s[0]=p2h,p2s[p2s.length-1]=p3h;break;default:eseguipezzo(new Linea2(p1,sh1.pt[1]),new Linea2(p2,sh2.pt[1]),0),eseguipezzo(new Linea2(sh1.pt[idr-1],p4),new Linea2(sh2.pt[idr-1],p3),2)}if(sh3=getshape().frompt(p2s),p1s.length<8&&p1s.length==p2s.length)for(let i=0;i<p1s.length-1;i++)eseguipezzo(new Linea2(p1s[i],p1s[i+1]),new Linea2(p2s[i],p2s[i+1]),1);else{let sh3=getshape().frompt([...p1s,...p2s.reverse()]),l3=new Linea2(p1s[0],p1s[p1s.length-1]),l4=l3.offset(-bordo[1]);eseguipezzo(l3,l4,1,sh3.pt)}}return{countid:countid,shape2:sh2,shapetop:sh3,bordi:bordi,dati:dati,draws:draws}}function creaprofiloesterno(ff,oggetti){let sh1,{x:x,y:y,tipo:tipo,bordo:bordo,taglio:taglio,h1:h1,h2:h2,l1:l1,l2:l2,forma:forma}=ff;x=x<50?50:x,y=y<50?50:y,l1=l1||0,l2=l2||0,h1=h1||0,h2=h2||0;let pts=[0,0];switch(tipo){case"i":case"d":pts.push(l1>0&&l1<x?l1:0,h1>0&&h1<y?y-h1:y),pts.push(l2>0&&l2<x-l1?x-l2:x,h2>0&&h2<y&&h2!=h1?y-h2:y);break;case"a":if(forma){let tm=getshape().fromstr(forma);tm.alignline({x:l1,y:y-h1},{x:x-l2,y:y-h2}),pts.push(...tm.vec)}else if((h1||h2)&&h1>=0&&h1<Math.min(y,x/2)&&h2>=0&&h2<Math.min(y,x/2)){let tm=getshape().fromstr(`a30;${l1||0};${y-h1};${x/2};${y};${x-l2};${y-h2}`);pts.push(...tm.vec)}else pts.push(0,y,x,y);break;case"s":l1>0&&h1>0?pts.push(0,y-h1,l1,y):pts.push(0,y),l2&&l2<x-l1&&h2>0&&h2<y?pts.push(x-l2,y,x,y-h2):pts.push(x,y);break;default:pts.push(0,y,x,y)}pts.push(x,0),ff.countid=0,sh1=getshape().fromvec(pts);let{countid:countid,shape2:shape2,shapetop:shapetop,bordi:bordi,dati:dati,draws:draws}=elaborapercorso(sh1,bordo,taglio,oggetti,ff.countid);return ff.countid=countid,{shape:sh1,internalshape:shape2,shape2:shape2,shapetop:shapetop,bordi:bordi,dati:dati,draws:draws}}
+function alignByMinDist(sag1,sag2,isopen){const n1=sag1.length,n2=sag2.length;if(n1<1||n2<1)return sag2.slice();let bestOffset=0,minSum=1/0;for(let k=0;k<n2;k++){const p0=sag1[0],q0=sag2[k%n2],dx0=p0.x-q0.x,dy0=p0.y-q0.y,p1=sag1[n1-1],q1=sag2[isopen?Math.min(k+n1-1,n2-1):(k+n1-1)%n2],dx1=p1.x-q1.x,dy1=p1.y-q1.y,sum=dx0*dx0+dy0*dy0+dx1*dx1+dy1*dy1;sum<minSum&&(minSum=sum,bestOffset=k)}return[...sag2.slice(bestOffset),...sag2.slice(0,bestOffset)]}function shapeclip(){function toclipformat(pts){let tm=pts.map((e=>({X:Math.round(1e4*e.x),Y:Math.round(1e4*e.y)})));return ensureOrientation(tm)}function fromclipformat(pts){return pts.map((e=>({x:e.X/1e4,y:e.Y/1e4})))}const ensureOrientation=poly=>ClipperLib.Clipper.Orientation(poly)?poly:poly.slice().reverse();function orientation(pt){if(!pt.length)return 0;let area=0;const n=pt.length;for(let i=0;i<n;i++){const current=pt[i],next=pt[(i+1)%n];area+=current.X*next.Y-next.X*current.Y}return area>0?1:area<0?-1:0}const _inflate=(pt,delta,cut=!1)=>{const co=new ClipperLib.ClipperOffset;co.MiterLimit=4,co.AddPath(pt,ClipperLib.JoinType.jtMiter,cut||2==pt.length?ClipperLib.EndType.etOpenButt:ClipperLib.EndType.etClosedPolygon);const solution=new ClipperLib.Paths;return co.Execute(solution,delta),solution};function _inflateopen(pts,delta){const co=new ClipperLib.ClipperOffset;co.MiterLimit=4,co.ArcTolerance=.25;const DD=1e4*delta,pshape=toclipformat(pts);co.AddPath(pshape,ClipperLib.JoinType.jtMiter,ClipperLib.EndType.etClosedPolygon);const solution=new ClipperLib.Paths;co.Execute(solution,DD);let tm=fromclipformat(solution[0]);return getshape().frompt(tm)}return{offset(shape,delta,full=!1){const co=new ClipperLib.ClipperOffset;co.MiterLimit=4,co.ArcTolerance=.25;const DD=1e4*Math.abs(delta),pshape=toclipformat(shape.pt);co.AddPath(pshape,ClipperLib.JoinType.jtMiter,ClipperLib.EndType.etOpenButt);const solution=new ClipperLib.Paths;co.Execute(solution,DD);let tm=fromclipformat(solution[0]);return full?getshape().frompt(tm):getshape().frompt(getptsoffset(shape.pt,tm,delta))},inflate:function inflate(shape,delta=2,mantainorder=!1,isopen=0){let pshape=toclipformat(shape.pt),tm=_inflate(pshape,1e4*delta);if(!tm||!tm.length)return getshape().frompt([]);let p2=getshape().frompt(fromclipformat(tm[0]));if(mantainorder){p2.orient!=shape.orient&&p2.reverse();let p3=alignByMinDist(shape.pt,p2.pt,isopen);if(p2.frompt(p3),isopen>0&&shape.pt.length>=3){function estendi1(sh1,sh2){let l1=sh1.segment(0).ruotata(-Math.PI/2,200,!0),l2=sh1.segment(-2).ruotata(-Math.PI/2,200),q2=sh2.segment(-2).interseca(l2),q1=sh2.segment(0).interseca(l1);q1&&(sh2.pt[0]=q1),q2&&(sh2.pt[sh2.pt.length-1]=q2)}function estendi2(sh1,sh2){let lfin=sh1.segment(-1),l2=sh2.segment(0),q1=lfin.interseca(l2);q1&&(sh2.pt[0]=q1),l2=sh2.segment(-2);let q2=lfin.interseca(l2);q2&&(sh2.pt[sh2.pt.length-1]=q2)}1==isopen?estendi1(shape,p2):estendi2(shape,p2)}}return p2},inflateopen:_inflateopen,inflateclose(shape,delta){let p2=_inflateopen(shape.pt,delta);p2.orient!=shape.orient&&p2.reverse();let p3=alignByMinDist(shape.pt,p2.pt,0);return p2.frompt(p3),p2},inflatecornici(shape,delta=2,linetruncateini,linetruncateend){let p2,n=shape.npt;if(2==n){let l2=shape.segment(0).offset(delta);p2=getshape().frompt([l2.p1,l2.p2])}else if(3==n){let l1=shape.segment(0).offset(delta),l2=shape.segment(1).offset(delta);if(l1.isparallela(l2))p2=getshape().frompt([l1.p1,l2.p2]);else{let p=l1.interseca(l2);p2=getshape().frompt([l1.p1,p,l2.p2])}}else{let l1=new Linea2(shape.pt[0],shape.pt[shape.npt-1]),len1=l1.len,l2=l1.perpendicolare(l1.p1,len1),l3=l1.perpendicolare(l1.p2,len1);l2.isparallela(shape.segment(0))&&(l2=l1.perpendicolare(l1.puntot(.1),len1)),l3.isparallela(shape.segment(shape.npt-2))&&(l3=l1.perpendicolare(l1.puntot(.9),len1));let n2=Math.floor(shape.npt/2),{t:t}=l2.proiezionet(shape.pt[n2]),t2=2*(t>0?-1:1),px2=l2.puntot(t2),px3=l3.puntot(t2);p2=_inflateopen([...shape.pt,px3,px2],delta);let idx=p2.pt.reduce(((imin,p,i)=>(p.x-px2.x)**2+(p.y-px2.y)**2<(p2.pt[imin].x-px2.x)**2+(p2.pt[imin].y-px2.y)**2?i:imin),0);p2.pt=p2.pt.slice(idx+2).concat(p2.pt.slice(0,idx)),p2.orient!=shape.orient&&p2.reverse(),linetruncateini&&(shape.truncatebefore(linetruncateini),p2.truncatebefore(linetruncateini)),linetruncateend&&(p2.truncateafter(linetruncateend),shape.truncateafter(linetruncateend))}return p2},intersecasplitter(areabase,forma1){const clipper=new ClipperLib.Clipper,pt1=[toclipformat(forma1.pt)],pt2=[toclipformat(areabase.pt)];clipper.AddPaths(pt1,ClipperLib.PolyType.ptSubject,!0),clipper.AddPaths(pt2,ClipperLib.PolyType.ptClip,!0);const solution=new ClipperLib.Paths;let res;if(clipper.Execute(ClipperLib.ClipType.ctIntersection,solution,ClipperLib.PolyFillType.pftNonZero,ClipperLib.PolyFillType.pftNonZero)&&solution.length>0){const path=solution[0];if(1===orientation(path)){res=getshape().frompt(fromclipformat(path)),res.orient!=forma1.orient&&res.reverse();for(let iu=0;iu<forma1.pt.length;iu++){let p2=forma1.pt[iu],id=res.pt.findIndex((p=>Math.abs(p.x-p2.x)<.01&&Math.abs(p.y-p2.y)<.01));if(id>0){id-=iu,0!=id&&res.selezionaprimo(id);break}}}}return res},offsetpts(pts,delta=.01){const DELTA=1e4*delta;let tm=_inflate(toclipformat(pts),DELTA);if(tm&&tm.length)return fromclipformat(tm[0])},areesplitter(shapept,clipspt,useInflatedClipping=!0){if(!Array.isArray(shapept)||shapept.length<3)return;if(!clipspt||0==clipspt.length)return[shapept];const subj=new ClipperLib.Paths,clip=new ClipperLib.Paths;let shape_in=useInflatedClipping?_inflate(toclipformat(shapept),-100):[toclipformat(shapept)],clips_in=useInflatedClipping?clipspt.flatMap((c=>_inflate(toclipformat(c),100))):clipspt.map((c=>toclipformat(c)));for(let s of shape_in)subj.push(s);for(let c of clips_in)clip.push(c);const clipper=new ClipperLib.Clipper;clipper.AddPaths(subj,ClipperLib.PolyType.ptSubject,!0),clipper.AddPaths(clip,ClipperLib.PolyType.ptClip,!0);const solution=new ClipperLib.Paths;if(!clipper.Execute(ClipperLib.ClipType.ctDifference,solution,ClipperLib.PolyFillType.pftNonZero,ClipperLib.PolyFillType.pftNonZero))return;let res=[];for(let x of solution)if(useInflatedClipping){const restored=_inflate(x,100);for(const r of restored)1===orientation(r)&&res.push(fromclipformat(r))}else if(x.length>4&&1==orientation(x)){const cleaned=_inflate(x,-100);if(cleaned.length>0)for(let cc of cleaned){const restored=_inflate(cc,100);for(const rr of restored)1===orientation(rr)&&res.push(fromclipformat(rr))}}else 1==orientation(x)&&res.push(fromclipformat(x));return res},unisci(shapes,holes,cuts){const subj=new ClipperLib.Paths,clip=new ClipperLib.Paths;for(let hh of shapes){let h2=[toclipformat(hh.pt)];for(let h of h2)subj.push(h)}if(holes&&holes.length)for(let hh of holes){let h1=toclipformat(hh.pt);clip.push(h1)}if(cuts&&cuts.length)for(let hh of cuts){let h1=toclipformat(hh.pt),h2=_inflate(h1,1,!0);for(let h of h2)clip.push(h)}const clipper=new ClipperLib.Clipper;clipper.AddPaths(subj,ClipperLib.PolyType.ptSubject,!0),clipper.AddPaths(clip,ClipperLib.PolyType.ptClip,!0);const solution=new ClipperLib.Paths;if(clipper.Execute(ClipperLib.ClipType.ctDifference,solution,ClipperLib.PolyFillType.pftNonZero,ClipperLib.PolyFillType.pftNonZero)){let res=[],holes=[];for(let x of solution)if(1==orientation(x)){let yy=[x];for(let y of yy)res.push({shape:getshape().frompt(fromclipformat(y)),holes:[]})}else holes.push(getshape().frompt(fromclipformat(x)));for(let h of holes)for(let s of res)if(s.shape.pointinshape(h.pt[0])){s.holes.push(h);break}return res}return[]}}}class Vis2d{constructor(name,scalalinea=1){this.name=name,this.clear(scalalinea)}clear(scalalinea=1){return this.vec=[],this.gr={},this._sl=scalalinea,this}creategr(name="grp"){return this.gr[name]||(this.gr[name]=new Vis2d(name,this._sl)),this.gr[name]}push(x=0,y=0,op={}){"number"==typeof op&&(op={rot:op}),op||(op={}),this.vec.push({type:"push",x:x,y:y,op:op})}pop(){this.vec.push({type:"pop"})}randomcolor(transp="100%"){return`hsl(${Math.floor(360*Math.random())}, 50%, 40%,${transp})`}addgr(gr){let name=gr;gr?.name&&(name=gr.name),this.gr[name]?this.vec.push({type:"group",name:name}):this.vec.push({type:"err",err:`addgroup: ${name} => missing`})}addquota(x1,y1,x2,y2,d=0,text="",scalafont=1,spessore=.25){this.vec.push({type:"quota",x1:x1,y1:y1,x2:x2,y2:y2,d:d,text:text,spessore:spessore,color:"black",scalafont:scalafont})}addqpunto(x1,y1,x2,y2,d=0,text="",scalafont=1,spessore=.25){this.vec.push({type:"qpunto",x1:x1,y1:y1,x2:x2,y2:y2,d:d,text:text,spessore:spessore,color:"black",scalafont:scalafont})}addpoint(p,id=-1,color="red",spessore=8){return p&&this.vec.push({type:"point",p:p,id:id,color:color,spessore:spessore*this._sl}),this}addline(l,id=-1,color=void 0,spessore=1){return l&&this.vec.push({type:"line",l:l,id:id,color:color,spessore:spessore*this._sl}),this}addrect(l,id=-1,color=void 0,spessore=1){return l&&this.vec.push({type:"rect",l:l,id:id,color:color,spessore:spessore*this._sl}),this}addrecta(l,id=-1,color=void 0){return l&&this.vec.push({type:"recta",l:l,id:id,color:color,spessore:0}),this}addshape(s,color=void 0,spessore=1){return s&&this.vec.push({type:"shape",s:s,color:color||this.randomcolor(),spessore:spessore*this._sl}),this}addshapelin(s,color=void 0,spessore=1){return s&&this.vec.push({type:"shapelin",s:s,color:color||this.randomcolor(),spessore:spessore*this._sl}),this}addarea(s,color=void 0){return s&&this.vec.push({type:"area",s:s,color:color||this.randomcolor()}),this}addoffset(x,y){return this.vec.push({type:"offset",x:x||0,y:y||0}),this}}function checkoggetto(oggetti,tipo,cod,isrect){if("h"==tipo&&(tipo="o"),oggetti||(oggetti=[]),"number"==typeof cod&&!["a","as"].includes(tipo))return{cod:"__",macro:"",sps:cod};let bb=oggetti.find((e=>e.tipo.includes(tipo)&&e.cod==cod&&(e.isshape||isrect||"a"!=tipo)));return bb||(bb=oggetti.find((e=>e.tipo.includes(tipo)&&(e.isshape||isrect||"a"!=tipo)))),bb||(bb={cod:"__",macro:"",sps:0}),"a"!=tipo&&"as"!=tipo||"__"==bb.cod||bb.color||(bb.color=`hsl(${function stringToHue(str){let hash=0;for(let i=0;i<str.length;i++)hash=31*hash+str.charCodeAt(i)>>>0;return Math.floor(.6180339887*hash%1*360)}(bb.cod)}, 95%, 97%`),bb}function getbordi(oggetti,bordo){let bordi,uguali=!1;if(Array.isArray(bordo)){bordo.length=4;let b0=bordo[0]||"";bordi=bordo.map((b=>checkoggetto(oggetti,"b",b||b0))),uguali=bordi.every((b=>b.sps===bordi[0].sps))}else{let tm=checkoggetto(oggetti,"b",bordo);bordi=[tm,tm,tm,tm],uguali=!0}return{bordi:bordi,uguali:uguali,senza:!(bordi[0].sps||bordi[1].sps||bordi[2].sps||bordi[3].sps),bl:bordi[0].sps,bt:bordi[1].sps,br:bordi[2].sps,bb:bordi[3].sps}}function elaborapercorso(sh1,bordo,taglio,oggetti,countid=0){let sh2,sh3,p1h,p2h,p3h,p4h,p1v,p2v,p3v,p4v,p1s,p2s,line1,line2,i1,i2,dati=[],draws=[];function eseguipezzo(l1,l2,bordo,shape){let info=l1.infoquad(l2);if(info&&info.distanza){let s0=getshape().frompt(shape||[l1.p1,l1.p2,l2.p2,l2.p1]),s1=s0.clone();(info.sx||info.sy)&&s1.move(-info.sx||0,-info.sy||0),info.angle&&s1.rotate(-info.angle||0);let tm={id:++countid,type:`b${bordo}`,info:info};shape&&(tm.shape=s1.pt),draws.push({type:`b${bordo}`,pt:s0.pt}),dati.push(tm)}}countid=countid||0;let np=sh1.pt.length,idr=np-1;oggetti||(oggetti=[]);let{bordi:bordi,uguali:uguali,senza:senza}=getbordi(oggetti,bordo);if(uguali)if(senza||!bordi[0].sps)sh2=sh1.clone();else{let b=bordi[0].sps;sh2=shapeclip().inflate(sh1,-b,!0)}else{let b,ll=[],pp=[];for(let i=0;i<np;i++){b=0==i?bordi[0].sps:i==idr-1?bordi[2].sps:i==idr?bordi[3].sps:bordi[1].sps,"number"!=typeof b&&(b=0);let l=sh1.segment(i).offset(-b);ll.push(l)}for(let i=0;i<np;i++){let p=ll[i].interseca(ll[(i-1+np)%np]);pp.push(p)}sh2=getshape().frompt(pp)}if(!senza){p1h=sh2.segment(idr).interseca(sh1.segment(0)),p2h=sh2.segment(1).interseca(sh1.segment(0)),p3h=sh1.segment(idr-1).interseca(sh2.segment(idr-2)),p4h=sh1.segment(idr-1).interseca(sh2.segment(idr)),p1v=sh1.segment(idr).interseca(sh2.segment(0)),p2v=sh1.segment(1).interseca(sh2.segment(0)),p3v=sh1.segment(idr-2).interseca(sh2.segment(idr-1)),p4v=sh1.segment(idr).interseca(sh2.segment(idr-1)),i1=1,i2=idr-2,line1=sh2.segment(0),line2=sh2.segment(idr-1);for(let i=1;i<idr-1;i++){let l=sh1.segment(i),p=l.interseca(line1);p&&l.onsegment(p)&&(i1=i,p2v=p),p=l.interseca(line2),p&&l.onsegment(p)&&(i2=i,p3v=p)}i1-=1,i2=idr-2-i2;let p1=sh1.pt[0],p2=sh2.pt[0],p3=sh2.pt[idr],p4=sh1.pt[idr];switch(taglio[0]){case"v":eseguipezzo(new Linea2(p4v,p1v),sh2.segment(idr),3),p2=p1v,p3=p4v;break;case"o":eseguipezzo(sh1.segment(idr),new Linea2(p4h,p1h),3),p1=p1h,p4=p4h;break;default:eseguipezzo(sh1.segment(idr),sh2.segment(idr),3)}switch(p1s=sh1.pt.slice(1,idr),p2s=sh2.pt.slice(1,idr),taglio[1]){case"v":eseguipezzo(new Linea2(p1,sh1.pt[1]),new Linea2(p2,p2v),0),eseguipezzo(new Linea2(sh1.pt[idr-1],p4),new Linea2(p3v,p3),2),i1&&(p1s=p1s.slice(i1)),i2&&(p1s=p1s.slice(0,-i2)),p1s[0]=p2v,p1s[p1s.length-1]=p3v;break;case"o":eseguipezzo(new Linea2(p1,p2h),new Linea2(p2,sh2.pt[1]),0),eseguipezzo(new Linea2(p3h,p4),new Linea2(sh2.pt[idr-1],p3),2),p2s[0]=p2h,p2s[p2s.length-1]=p3h;break;default:eseguipezzo(new Linea2(p1,sh1.pt[1]),new Linea2(p2,sh2.pt[1]),0),eseguipezzo(new Linea2(sh1.pt[idr-1],p4),new Linea2(sh2.pt[idr-1],p3),2)}if(sh3=getshape().frompt(p2s),p1s.length<8&&p1s.length==p2s.length)for(let i=0;i<p1s.length-1;i++)eseguipezzo(new Linea2(p1s[i],p1s[i+1]),new Linea2(p2s[i],p2s[i+1]),1);else{let sh3=getshape().frompt([...p1s,...p2s.reverse()]),l3=new Linea2(p1s[0],p1s[p1s.length-1]),l4=l3.offset(-bordo[1]);eseguipezzo(l3,l4,1,sh3.pt)}}return{countid:countid,shape2:sh2,shapetop:sh3,bordi:bordi,dati:dati,draws:draws}}function creaprofiloesterno(ff,oggetti){let sh1,{x:x,y:y,tipo:tipo,bordo:bordo,taglio:taglio,h1:h1,h2:h2,l1:l1,l2:l2,forma:forma}=ff;x=x<50?50:x,y=y<50?50:y,l1=l1||0,l2=l2||0,h1=h1||0,h2=h2||0;let pts=[0,0];switch(tipo){case"i":case"d":pts.push(l1>0&&l1<x?l1:0,h1>0&&h1<y?y-h1:y),pts.push(l2>0&&l2<x-l1?x-l2:x,h2>0&&h2<y&&h2!=h1?y-h2:y);break;case"a":if(forma){let tm=getshape().fromstr(forma);tm.alignline({x:l1,y:y-h1},{x:x-l2,y:y-h2}),pts.push(...tm.vec)}else if((h1||h2)&&h1>=0&&h1<Math.min(y,x/2)&&h2>=0&&h2<Math.min(y,x/2)){let tm=getshape().fromstr(`a30;${l1||0};${y-h1};${x/2};${y};${x-l2};${y-h2}`);pts.push(...tm.vec)}else pts.push(0,y,x,y);break;case"s":l1>0&&h1>0?pts.push(0,y-h1,l1,y):pts.push(0,y),l2&&l2<x-l1&&h2>0&&h2<y?pts.push(x-l2,y,x,y-h2):pts.push(x,y);break;default:pts.push(0,y,x,y)}pts.push(x,0),ff.countid=0,sh1=getshape().fromvec(pts);let{countid:countid,shape2:shape2,shapetop:shapetop,bordi:bordi,dati:dati,draws:draws}=elaborapercorso(sh1,bordo,taglio,oggetti,ff.countid);return ff.countid=countid,{shape:sh1,internalshape:shape2,shape2:shape2,shapetop:shapetop,bordi:bordi,dati:dati,draws:draws}}
 /**
  * Genera segmenti basati su intervalli e punti di interruzione
  * @param {Array<{a: number, b: number}>} t1 - Array di oggetti che rappresentano intervalli con coordinate a e b

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "markuno_lib",
-  "version": "1.2.40",
+  "version": "1.2.41",
   "description": "Croswil Markuno Language Lib",
   "author": "Croswil SRL",
   "license": "SEE LICENSE IN LICENSE.txt",