magpie-plugin-msmoli 0.0.0-stage → 0.2.0

package/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2026 MisonL
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package/README.md

@@ -1,3 +1,510 @@
-# Temporary Holding Version
+# magpie-plugin-msmoli
 
-This version is a temporary placeholder for this package. An operational version to replace this has been submitted for review and is awaiting a staged release.
+A [magpie](https://github.com/yetone/magpie) plugin that claims ModelScope's
+(魔搭) daily **魔粒** credits for you — one check-in a day instead of opening the
+site — and shows the balance and today's spend on the account's usage card.
+
+## What 魔粒 is
+
+ModelScope's API-Inference is free, paid in 魔粒:
+
+| Grant | Amount | Expires |
+|---|---|---|
+| Sign-in, per day | 200 | 24 hours |
+| Aliyun account bound, per day | 50 | 24 hours |
+| Email / profile / homepage completed | 50 each | 90 days, once |
+
+Daily grants are **24 hours only**. They do not accumulate: what you don't
+spend today is gone. A flagship model costs 2 魔粒 per call (mainstream 1,
+lightweight 0.5), so the daily 250 is roughly 125 calls.
+
+## Purpose, responsibility, and risk
+
+**What it is for.** A personal utility: it claims the daily 魔粒 grant of the
+ModelScope (魔搭) account *you* sign in, and does nothing else. It is not an
+official ModelScope product; it is not affiliated with ModelScope, Alibaba or
+magpie, and it collects nothing about you — the token stays in magpie's own
+`plugin-auth.json`, and every request goes to the site the account signed in
+to.
+
+**The risk you are taking.** ModelScope has no check-in endpoint. The daily
+grant exists for a *real* website sign-in, and this plugin obtains it by
+calling `login/info` once a day with the browser's session cookie — a script
+posing as the browser, not a button the official client offers. ModelScope's
+user agreement forbids plugins that interfere with the service (4.1.2(1)) and
+"刷分" with third-party tools (4.1.2(5)), and lets the platform freeze a
+user's benefits or blacklist them for abuse (2.3.1 and the 魔粒 rules). An
+account is real-name verified and often tied to Aliyun, so what is at stake is
+the account, not the 250 credits that expire the same day. No account has been
+reported frozen for running this, and no one can promise one never will be —
+whether the service's detection would ever notice is not something this
+project can answer. Whether to run it is a decision about your own account.
+
+**Responsibility.** You are responsible for complying with ModelScope's terms
+when you use this. The software is provided under the MIT licence, without
+warranty of any kind; the maintainer is not liable for a suspended or frozen
+account, lost credits, or anything else that follows from running it. See
+[LICENSE](LICENSE).
+
+**Not in the magpie market, and it will not be submitted.** magpie's community
+market declined to list this package for exactly the reason above
+([plugins#714](https://github.com/magpie-community/plugins/pull/714)), and the
+project has decided not to submit it again. It stays installable by name from
+npm.
+
+## Install
+
+Needs magpie itself (<https://usemagpie.ai>). On macOS, use `magpie --version` to check it's on PATH; if not, use the app's full path:
+`/Applications/magpie.app/Contents/MacOS/magpie`.
+
+### Install from npm
+
+The package is on npm as `magpie-plugin-msmoli` (latest 0.1.0). Installs into
+magpie's own plugin folder, and `magpie plugin update` follows the versions.
+
+```bash
+magpie plugin add magpie-plugin-msmoli
+printf 'ms-your-token\n' | magpie plugin login msmoli
+```
+
+### Install via GitHub URL (no clone, auto-updates)
+
+This installs into magpie's own plugin folder (`~/.config/magpie/plugins` for a regular install, or `data/plugins` for the portable version), so it updates with `magpie plugin update`.
+
+```bash
+magpie plugin add github:MisonL/magpie-plugin-msmoli
+printf 'ms-your-token\n' | magpie plugin login msmoli
+```
+
+The token is stored in `plugin-auth.json`; one login works regardless of the form you used to install.
+
+### Install from a clone
+
+Keeps your own copy, which is what you want if you plan to change it. magpie
+references the folder where it lies rather than copying it, so it loads only
+while that folder is there, and an update means pulling and adding it again.
+
+```bash
+git clone https://github.com/MisonL/magpie-plugin-msmoli.git
+cd magpie-plugin-msmoli
+magpie plugin add "$PWD"
+printf 'ms-your-token\n' | magpie plugin login msmoli
+```
+
+Either form ends the same way: a `msmoli` row under Settings → Usage → Plugins.
+The sign-in is kept per provider id (`msmoli`) rather than per folder, so
+switching between the two forms (or moving the clone) keeps the token — no
+second login.
+
+### International site (modelscope.ai)
+
+The plugin now provides a second provider for the international site:
+`msmoli-intl` (ModelScope 魔粒（国际版）). The same `ms-` token format, the same
+daily grant rules, **but tokens are site-specific** — a token from `modelscope.cn`
+answers 401 on `modelscope.ai`, and vice versa.
+
+The sign-in and check-in work the same way:
+
+```bash
+printf 'ms-your-intl-token\n' | magpie plugin login msmoli-intl
+```
+
+The check-in window (`msmoli.json`) is shared between both providers — it is
+a personal preference, not a per-site setting. To turn on the international
+check-in, set `msmoli-intl` in your plugin-checkins instead of or alongside
+`msmoli` (see "Turn the check-in on" below, substituting the provider id).
+
+### Already have ModelScope set up in magpie? Sync that key to the plugin
+
+If you added ModelScope earlier just for chat, its key is already in
+`providers.json`. This package ships a small CLI that logs the same token into
+the plugin, so you don't have to find it again.
+
+It syncs the domestic site only, because the built-in preset it reads is the
+`modelscope.cn` one. The international site has no preset; sign `msmoli-intl`
+in by hand (`magpie plugin login msmoli-intl`).
+
+Installed from GitHub, magpie keeps its own copy in its plugin folder:
+
+```bash
+node ~/.config/magpie/plugins/node_modules/magpie-plugin-msmoli/bin/sync.mjs --status      # see both sides
+node ~/.config/magpie/plugins/node_modules/magpie-plugin-msmoli/bin/sync.mjs --to-plugin   # sync
+```
+
+Installed from a clone, run the file in the clone — magpie references that
+folder and copies nothing (`./bin/sync.mjs`; on Windows or WSL, where the
+file may not carry an executable bit, run it as `node bin/sync.mjs`). Portable
+installs keep the same layout under their `data` folder; if detection misses,
+`--dir <magpie's config folder>` and `--magpie <path to the magpie binary>` say
+where things are: for a portable install that is its `data` folder, not the
+folder the executable sits in. `--magpie` takes a path, absolute or relative —
+a bare `magpie` is refused, because that one is resolved through `PATH` and the
+first `magpie` on it would be handed the token. `npx magpie-plugin-msmoli` runs
+the CLI from npm (published as 0.1.0) — npm 12 blocks `npx github:…` by
+default, so don't start from that.
+
+`--dir` says where to *read*; magpie's CLI has no such flag, so a write always
+lands in the binary's own folder. Given both and they disagree, the tool stops
+before writing anything rather than reading one magpie and writing another.
+"Disagree" means the folders are different places, not that the strings differ:
+a shell completes a directory with a trailing slash, `/private/tmp` and `/tmp`
+are one folder on a Mac, and `data/.` is `data` — each names the binary's own
+folder and is allowed.
+
+It reads magpie's config but never writes it: the writes are magpie's own
+(`magpie plugin login`, `magpie plugin logout`, `magpie provider key`), and the
+token is masked in everything it prints, failures included. When the plugin
+already uses the same key it changes nothing; when the two keys differ it
+refuses, because a second `login` would add a second account — pass `--force`
+to replace a single existing account. `--to-preset` goes the other way (needs
+`--force`: that key is what chat uses). If more than one provider could be the
+built-in side (say, a relay of the same host), the tool refuses to guess and
+`--from <id>` picks one; `--dry-run` prints the commands without running them.
+A value flag given twice (`--dir a --dir b`) is refused, not silently last-wins,
+and `--dir=<folder>` is read as well. `--from` and a stray argument are echoed
+back masked when the value looks like a key — a token pasted into the wrong
+position is never printed whole, whatever its shape. That covers the shapes
+`ms-…` does not: a GitHub or Slack token, an AWS secret (which carries `/`), a
+UUID, a hex digest, a base64 body — long, or short enough that only its trailing
+`=` (or a `+` beside a case mix) gives it away. The judgement runs
+word by word,
+so a key with a space or a newline pasted onto it — the shape a copy out of a
+terminal or a chat window leaves — or quoted inside a line is still the key it
+is. A word that is one key is masked whole, ends and all, including one split with
+separators — a hex digest with dashes, a key written as `AbCdEfGh.IjKlMnOp…` —
+and an AWS secret, whose two parts of 12+ characters with mixed case mark it. An
+invisible character dropped inside a key (a zero-width space or `\x01`, the
+shape a copy out of a chat window leaves) does not save it either: the
+control/format characters sitting between key-alphabet characters are removed
+before masking, so the two halves are rejoined into the one key they are —
+each half alone falls under the length floor and would have leaked. A
+word that starts like a path (`/`, `~`, `.`, a drive letter, a UNC root) keeps
+its shape, and only the key-like run inside it is masked, so `--dir
+/tmp/ghp_16C7…` still names the folder it read; a key pasted in *behind* a path
+prefix (`~/keys/sk-ant-…`) reads as part of that path, which is what keeping a
+path's shape costs. The folder is reported
+the same way on every line that names it, and magpie's own output goes through
+the same door — a key of another provider in the child's error message is
+masked there too, not only the `ms-` shape. A provider id and an account name
+are read out of magpie's own files and go through the same door: a key pasted
+into either field is masked on every line the tool names it.
+
+Turn the check-in on: Settings → Usage → Plugins → the `msmoli` row, or in
+`settings.json` (in magpie's own folder, `~/.config/magpie` for an installed
+magpie):
+
+```json
+{
+  "pluginCheckins": {
+    "msmoli": true
+  }
+}
+```
+
+The token comes from <https://modelscope.cn/my/myaccesstoken>. The same `ms-`
+token is both the inference `Authorization: Bearer` and the web session cookie,
+so nothing else needs configuring. For the international provider
+(`msmoli-intl`), the token comes from <https://modelscope.ai/my/myaccesstoken>
+instead — the two sites' tokens do not interchange.
+
+From then on magpie claims it once a Beijing day per signed-in account, retries
+later that day if it fails, and reports the outcome on the account's usage card:
+
+```
+● msmoli  API key …a1b2 · 魔搭社区  魔粒 1% (今日用 2 / 领 250 · 余额 249.5) ↻14h24m tomorrow 09:31  249.5 魔粒可用 left
+```
+
+## How the check-in works
+
+ModelScope publishes no check-in endpoint. What it does have is a side effect:
+`GET /api/v1/users/login/info` counts as a sign-in, and the first one of the
+day grants `daily_active` 200 and `aliyun_bindlogin` 50. Repeat it the same day
+and nothing more is granted.
+
+A hook that just calls it can't tell "claimed now" from "claimed hours ago", so
+this one reads the day's ledger around it:
+
+1. read today's `EARN` records — is `daily_active` there?
+2. touch `login/info`
+3. read the ledger again
+
+A `claimed` needs a grant the ledger did not already show around the touch. If
+the touch went through and the ledger still shows nothing, the plugin asks
+magpie to look again half an hour later (`until`), once — from Beijing noon on
+magpie would otherwise settle `inactive` for the day, and a grant written a few
+seconds late was recorded as "the account may not be in the campaign". Before
+noon magpie's own provisional re-ask (every 30 minutes) already covers it.
+
+Four outcomes follow:
+
+| Outcome | Meaning |
+|---|---|
+| `done` | already claimed today, with the day's total |
+| `claimed` | this run claimed it, with the amount — a grant the ledger did not already show, so a row that was there before the touch is never counted as this run's |
+| `inactive` | the sign-in went through but nothing was granted (from noon on, asked once more in 30 minutes before it stands for the day) |
+| `failed` | nothing was claimed — including "not yet time", explained below |
+
+The endpoints it uses, all on `modelscope.cn` with `Cookie: m_session_id=ms-…`
+(a browser UA and a `Referer` are enough — no CSRF token):
+
+| Purpose | Path |
+|---|---|
+| Sign-in / check-in trigger | `GET /api/v1/users/login/info` |
+| Balance | `GET /openapi/v1/magicubes/balance` |
+| Ledger | `GET /openapi/v1/magicubes/transactions?page=1&page_size=50` |
+
+`type` in the ledger has been seen as `EARN` and `SPEND_CONFIRM`; there is
+also an `EXPIRE`, which this plugin ignores. Rows are aggregated per day, type,
+`rule_key` and `model_tier` — a day's spending shows one row per model tier it
+used — with a `count` on each, and the list is sorted newest first. The ordering
+is what makes the single page of 50 enough: today's rows come before any older
+one. Measured on a live account that is 3–7 rows a day, so a page reaches back
+about a fortnight rather than 50 days; what the read would not survive is a
+single day with more than 50 rows. Asking for a larger page does not help —
+the server answers `page_size=200` with 50.
+
+### When it claims: the check-in window
+
+The claim is held back until a time of day, by default somewhere in
+**08:30–10:00 Beijing time** — an account's own minute in that window,
+picked from a hash of the day and the account, so it doesn't move between
+the host's retries. It makes the traffic look like a person opening the
+site in the morning rather than at the stroke of midnight.
+
+Waiting costs nothing: daily grants **expire 24 hours after they land**
+(a grant at 15:35 expires at 15:35 the next day), so claiming at 9am leaves
+the credits good until 9am tomorrow.
+
+Set it in `msmoli.json` in magpie's own folder (`~/.config/magpie` for an
+installed magpie, the data folder for a portable one):
+
+```json
+{ "checkinWindow": ["08:30", "10:00"] }
+```
+
+One string works the same way: `{ "checkinWindow": "08:30-10:00" }`.
+
+`false` turns the window off (claim whenever magpie asks); so does `"off"`.
+An unusable value — `08:30`–`08:00`, a date that isn't a clock time — falls
+back to the default rather than never claiming. An end past **23:00** is
+capped there: the host does not ask at the target's minute — its own look runs
+every 30 minutes on a phase of its own, so the first ask past a target can come
+up to half an hour late, and the retry after a failure half an hour after that.
+A target needs both to still land on the same day. Capping at 23:00 leaves any
+target that room; later would leave some with one ask, or none. A window that sits entirely past 23:00 falls back to the
+default window too, since there would be nowhere left to put the target. The
+file is read on every ask, so a change takes effect without restarting
+magpie.
+
+How it fits magpie's schedule: magpie asks once when the Beijing day turns,
+then every 30 minutes — always after a `failed`, and also after a
+`done`/`inactive`/`ineligible` it hasn't seen a claim for yet, up to noon
+Beijing (a provisional answer: the vendor's day may not have turned; from noon
+on the plugin's own `until` buys the same re-ask when the ledger lagged). So
+before the window's moment the plugin answers `failed` with the time it will
+run, and sends **no request at all**. `failed` is still the one outcome that
+guarantees a re-ask; the others only get one while the day is unproven.
+
+What that costs, since a plugin has no other way to defer: until the claim
+actually runs the account card shows a red dot and magpie's own "check-in
+failed; magpie tries again later" wording, each of those asks rewrites
+magpie's `plugin-checkin.json`, and `magpie accounts checkin` run in that
+period exits non-zero. Turning the window off removes all three.
+
+How long that is depends on when magpie next asks, not on the target alone.
+Measured on a real day: the target was 09:01, magpie asked at 09:00:57 (three
+seconds early, so `failed`), and the claim landed on the next ask at 09:31 —
+about 9.5 hours from midnight, rather than the 8.5 the window's 08:30 start
+alone suggests. That is also why the card names the cadence instead of a
+countdown: the host keeps the line until its next ask, half an hour later, so
+"约 8 分钟后" would be wrong for most of the time it is on screen.
+
+### Upstream
+
+magpie gives a plugin no timer, no clock, and no say in when it is called:
+`auth.checkin(getAuth, info)` returns an outcome and the host decides when
+to ask again. Everything above is worked around within that contract, and
+the awkward parts (proving "not yet" as a failure, whole-day granularity for
+the account card) want a line in
+[this issue](https://github.com/yetone/magpie/issues/3245) proposing timers and
+`recheck` for plugins.
+
+Two consequences worth knowing, both from the same missing timer: a window's
+target is only reached by the host's own asks, so one that falls while the
+machine is asleep is claimed on the next ask after it wakes (the day is lost
+only if that happens past midnight); and the plugin cannot retry on its own
+between asks — the window's cap (above) is what buys the retry.
+
+### More than one account
+
+The plugin is written per account, not per token. magpie keeps each signed-in
+token under its own key — the first as `msmoli`, later ones as `msmoli#xxxxxx`
+— and asks the check-in once per account, handing each its own token through
+`getAuth`. So with two tokens:
+
+- each account gets **its own target minute** that day (the hash is over the
+  day and that account's token), so the two normally claim at different
+  minutes — a collision is possible, but only costs both a shared minute;
+- each account's check-in is recorded, retried and shown separately in
+  `plugin-checkin.json` and on the card;
+- the name read at check-in is cached per token, so one account's nickname
+  never appears on another's row.
+
+Add a second one the same way, then pick which to use:
+
+```bash
+printf 'ms-the-second-token\n' | magpie plugin login msmoli
+magpie accounts            # both rows, each with its own 魔粒 window
+```
+
+The card names an account by the name ModelScope gives it. An api-type
+sign-in has no such name, so the check-in writes the nickname back: the same
+sign-in entry, the token still stored once, now with `accountId` beside it.
+
+It happens on the first check-in that actually runs in the host process, so a
+fresh install shows `API key …a1b2` until then. An account whose check-in is
+already settled for the day is not asked again — magpie reuses the record — so
+the name appears with the next day's check-in rather than on upgrade.
+
+If you would rather choose the name yourself, magpie's own alias wins over it:
+
+```bash
+magpie accounts alias msmoli "API key …a1b2" my-main
+```
+
+The second word is the account as the card shows it *now*: before the first
+check-in that is the key's tail, afterwards the ModelScope nickname. An account
+you have named is left alone — the check-in won't write its nickname over your
+alias — so either label works, and the alias outranks the nickname from then on.
+
+And the daily grant belongs to the ModelScope account, not to the key: the
+claim is idempotent server-side per account per day, so a second token for the
+same ModelScope user gets `done` rather than another 250.
+
+## Why its own provider, with no models
+
+The plugin registers `msmoli` rather than the built-in `modelscope` preset, for
+two reasons:
+
+1. magpie namespaces a plugin id that collides with a preset into
+   `<id>-plugin`, so a plugin that named itself `modelscope` would not be the
+   same provider anyway — it would only sit next to the preset and invite people
+   to take one for the other.
+2. **Safety.** magpie's gateway passes over an account whose usage window reads
+   as used up. If a check-in plugin served the provider that inference actually
+   routes through, reporting 100% would take the whole chat path out of magpie.
+
+So chat keeps using the `modelscope` preset with your API key in
+`providers.json`, and this plugin only carries the sign-in its check-in runs as.
+
+### Two ModelScope rows, and why that is fine
+
+The providers page then shows two: `ModelScope` (the preset, with your models)
+and `ModelScope 魔粒` (this plugin, with none). They are separate providers that
+happen to share one token, and they do not fight:
+
+| | `modelscope` preset | `msmoli` (this plugin) |
+|---|---|---|
+| Serves chat models | yes | no — `magpie models` never lists it |
+| Its usage card | none (the preset has no balance endpoint) | 魔粒 balance and today's spend |
+| Check-in | not built in for ModelScope | this plugin, once a day |
+| Reachable by the gateway | yes | no, so a card reading 100% cannot route around it |
+
+The token being in both places is how magpie is built: a preset keeps its key
+in `providers.json`, a plugin keeps its sign-in in `plugin-auth.json`. Entering
+the same `ms-` token in both is expected. Nothing reads the plugin's usage card
+to decide where chat goes — that is the point of the separate id.
+
+The preset's empty card has one consequence worth knowing. ModelScope's
+inference API has no balance endpoint, so magpie cannot see that the key's 魔粒
+are gone; the gateway learns it from the vendor's own `429 insufficient balance`
+and then rests the key for 30 minutes. Until then each request spends one failed
+try on it first. The balance is on the account, and `modelscope.cn` does answer
+it, so the preset can be told: in its editor, Balance URL
+`https://modelscope.cn/openapi/v1/magicubes/balance` and Balance field
+`data.available_balance` (the same token answers it — `magpie quota modelscope`
+then reads a number instead of `no balance endpoint known for it`).
+
+The one real overlap to know about: **both rows cost nothing extra**, but if you
+remove the plugin's sign-in, chat is unaffected, and if you remove the preset,
+the check-in keeps working. They fail independently.
+
+If you sign in the international site as well, that adds one more row,
+`msmoli-intl` (ModelScope 魔粒（国际版）). It has every property in the table
+above — no models, its own card, its own check-in — and fails independently of
+both the preset and the domestic plugin row.
+
+## Privacy
+
+`login/info` responds with `Email` and `GitlabAccessToken` among other fields.
+This plugin reads `NickName` / `Name` and nothing else; the rest is dropped as
+soon as the response is parsed. The token lives only in magpie's own
+`plugin-auth.json` — the plugin never writes it anywhere, never logs it, never
+sends it anywhere but the site the account was signed in for (`modelscope.cn`
+for `msmoli`, `modelscope.ai` for `msmoli-intl`).
+
+The one thing it writes is that nickname, as `accountId` on the sign-in it
+already has, so magpie's card can name the account. It goes through the host's
+own `client.auth.set`, which replaces the sign-in entry — so the plugin hands
+back what the host gave it, with the name added, and the token is still
+stored once.
+
+It also reads `providers.json`, magpie's own list of providers, for one thing:
+whether you already named this account yourself. If you have, it writes
+nothing — your name stays, and the nickname is not put over it.
+
+## Scope and limits
+
+**ModelScope's terms and the risks of running this are stated above, in
+[Purpose, responsibility, and risk](#purpose-responsibility-and-risk).**
+
+- One account's own daily grant, idempotent: a check-in reads the ledger, touches
+the sign-in endpoint, and reads the ledger again — three requests. A day already
+claimed (a retry, a later ask) answers `done` in two; a touch the ledger has not
+caught up with reads it once more, four. Once a day.
+Asks that arrive before the window open send nothing at all.
+The usage read makes two requests and never touches the sign-in endpoint, so the
+menu bar's polling cannot turn into check-ins.
+- Every request gives up after 8 seconds, and a response body is read to at most
+256 KiB; neither can hold the host or grow without bound. The timeout covers the
+body as well as the request: a proxy that stops mid-reply is cut at the same
+8 seconds, and says so rather than passing the runtime's own word for it
+through (`terminated` on Node, a sentence about `verbose: true` on Bun). A whole
+check-in gives up after 25 seconds and a whole usage read after 18, because
+magpie runs every provider's check-ins under one two-minute budget and asks
+accounts one at a time — a hook cut short answers `failed`, which the host
+retries in half an hour, and that retry reads the ledger before claiming, so
+nothing is lost.
+- **A body it does not understand fails; it never reads as zero.** No `data`, a
+`data` that is a list rather than an object, a balance with no
+`available_balance` or one that is not a number — each is a failure with the
+reason, because "0 魔粒可用" is a definite answer that would be false. The same
+goes for the server's own text: a message or a grant's title carrying a key —
+this account's token, or one of another vendor's, which this plugin never held
+and therefore cannot compare against — has it masked before the text reaches
+the card or magpie's log. What counts as a key there is the same rule `--from`
+uses, so a ledger title or a server message of ordinary words is untouched.
+- `MAGPIE_MSMOLI_CONFIG` overrides the config file's path. It exists so the test
+  suite never touches a real file; it works in production too.
+- The other 170 魔粒 a day come from liking 10 items (20), posting AIGC works
+  (100) and AIGC models (50). None of those have an API, and automating them
+  means driving the web UI, so this plugin does not touch them.
+
+## Troubleshooting
+
+| Symptom | Fix |
+|---|---|
+| `not signed in` | `printf 'ms-token\n' \| magpie plugin login msmoli` |
+| No 魔粒 window on the card, or no check-in | restart magpie (the plugin host caches) |
+| `failed` with HTTP 401 | the token was revoked, or it belongs to the other site — `modelscope.cn` and `modelscope.ai` do not share tokens. The card names which site refused (国内站 / 国际站). Make a new token on that site and sign in again |
+| `failed` with HTTP 403 | ModelScope's risk control refused the request; the token is fine. It retries in 30 minutes |
+| Before the window the card reads failed, with a line naming the claim time: `09:56 后自动领取（magpie 每半小时问一次，无需操作）` | expected — the card leads with when it will claim; see "When it claims" above |
+| Always `inactive` | the sign-in works but nothing shows in today's ledger: the account may not be eligible, or the grant hasn't been written yet (a claim made elsewhere shows as `done`). Before Beijing noon magpie asks again every 30 minutes; from noon on the plugin asks once more itself, half an hour later ("半小时后再核对一次"), and only the second `inactive` stands for the day |
+| Chat through the `modelscope` preset answers `429 insufficient balance` in the Routing log | the account's daily 250 魔粒 are spent — a flagship call costs 2, so ~125 calls run the day dry and the vendor refuses the rest. Not this plugin: it registers no models. If you want magpie to *see* the balance on the preset's card too, give the preset the same reading — Balance URL `https://modelscope.cn/openapi/v1/magicubes/balance`, Balance field `data.available_balance` in its editor (the same token answers it; read `1.50` on 2026-10-28). Whether the gateway then holds a drained key before spending a request on it is not verified — the safe path is still the 429's own 30-minute rest |
+| Two accounts of one ModelScope nickname, and only one of them checks in | magpie before 2026-10-20 kept a plugin's check-in per display name rather than per sign-in, so namesakes collapsed into one. Update magpie: the fix landed upstream on 2026-10-20 (magpie-community/plugins#254) |
+| Edits to this plugin do nothing | path plugins are referenced in place; restart magpie |
+| Installed both ways by accident, and `magpie plugin list` says `msmoli` is "served by" one of them | that is magpie keeping two copies of one provider id. Remove one: `magpie plugin rm github:MisonL/magpie-plugin-msmoli` or `magpie plugin rm <path>`. magpie files your alias with the package it was set against, so removing a copy can take the display name with it — it comes back if you add that package again, or you set the alias once more |
+
+## License
+
+MIT