made-bridge 0.0.0-stage → 0.2.0

package/public/i18n-messages.js

@@ -0,0 +1,967 @@
+// Interface messages only; user instructions and assistant replies are never translated.
+export const messages = {
+  "app.001": {
+    "zh-CN": "等待确认",
+    "en": "Awaiting confirmation"
+  },
+  "app.002": {
+    "zh-CN": "排队中",
+    "en": "Queued"
+  },
+  "app.003": {
+    "zh-CN": "执行中",
+    "en": "Running"
+  },
+  "app.004": {
+    "zh-CN": "已完成",
+    "en": "Completed"
+  },
+  "app.005": {
+    "zh-CN": "已转交",
+    "en": "Handed off"
+  },
+  "app.006": {
+    "zh-CN": "失败",
+    "en": "Failed"
+  },
+  "app.007": {
+    "zh-CN": "已取消",
+    "en": "Cancelled"
+  },
+  "app.008": {
+    "zh-CN": "码得",
+    "en": "made"
+  },
+  "app.009": {
+    "zh-CN": "等待重试",
+    "en": "Awaiting retry"
+  },
+  "app.010": {
+    "zh-CN": "未知状态",
+    "en": "Unknown status"
+  },
+  "app.011": {
+    "zh-CN": "Codex 对话在另一窗口运行。请先停止并关闭，再次确认。",
+    "en": "This Codex conversation is active in another window. Stop and close it, then confirm again."
+  },
+  "app.012": {
+    "zh-CN": "未指定助手",
+    "en": "No assistant selected"
+  },
+  "app.013": {
+    "zh-CN": "未指定项目",
+    "en": "No project selected"
+  },
+  "app.014": {
+    "zh-CN": "此助手接口不支持指定对话；码得只归组任务，无法保证上下文隔离",
+    "en": "This assistant cannot target a conversation. made groups tasks, but cannot guarantee separate context."
+  },
+  "app.015": {
+    "zh-CN": "助手会沿用这个任务的上下文",
+    "en": "The assistant continues with this task's context"
+  },
+  "app.016": {
+    "zh-CN": "当前为独立执行；助手不会自动记住此前的指令",
+    "en": "Each instruction runs independently; earlier instructions are not remembered"
+  },
+  "app.017": {
+    "zh-CN": "请求失败（{v0}）",
+    "en": "Request failed ({v0})"
+  },
+  "app.018": {
+    "zh-CN": "桥接服务没有返回操作令牌",
+    "en": "The bridge did not return an action token"
+  },
+  "app.019": {
+    "zh-CN": "最近同步 {v0}",
+    "en": "Last synced {v0}"
+  },
+  "app.020": {
+    "zh-CN": "无法连接桥接服务",
+    "en": "Cannot connect to the bridge"
+  },
+  "app.021": {
+    "zh-CN": "已再次确认，Codex 正在重试。",
+    "en": "Confirmed again. Codex is retrying."
+  },
+  "app.022": {
+    "zh-CN": "指令已确认，正在交给编程助手。",
+    "en": "Instruction confirmed and sent to the assistant."
+  },
+  "app.023": {
+    "zh-CN": "取消请求已发送。",
+    "en": "Cancellation requested."
+  },
+  "app.024": {
+    "zh-CN": "操作失败",
+    "en": "Action failed"
+  },
+  "app.025": {
+    "zh-CN": "再次确认",
+    "en": "Confirm again"
+  },
+  "app.026": {
+    "zh-CN": "确认执行",
+    "en": "Confirm and run"
+  },
+  "app.027": {
+    "zh-CN": "取消指令",
+    "en": "Cancel instruction"
+  },
+  "app.028": {
+    "zh-CN": "确认",
+    "en": "Confirm"
+  },
+  "app.029": {
+    "zh-CN": "取消",
+    "en": "Cancel"
+  },
+  "app.030": {
+    "zh-CN": "剪贴板不可用",
+    "en": "Clipboard unavailable"
+  },
+  "app.031": {
+    "zh-CN": "{v0}已复制",
+    "en": "{v0} copied"
+  },
+  "app.032": {
+    "zh-CN": "复制失败，请选中文字手动复制。",
+    "en": "Copy failed. Select the text and copy it manually."
+  },
+  "app.033": {
+    "zh-CN": "复制{v0}",
+    "en": "Copy {v0}"
+  },
+  "app.034": {
+    "zh-CN": "在 Codex 打开",
+    "en": "Open in Codex"
+  },
+  "app.035": {
+    "zh-CN": "继续命令",
+    "en": "resume command"
+  },
+  "app.036": {
+    "zh-CN": "如果同一 Codex 对话正在桌面打开或执行，请先停止并关闭它，再由码得或桥接器继续。若状态是“等待重试”，关闭后在码得双击 BOOT，或在此页点“再次确认”。若打开链接失败，可使用继续命令。",
+    "en": "If this Codex conversation is open or running on the desktop, stop and close it before continuing through made or the bridge. If it is awaiting retry, double-press BOOT or choose “Confirm again” here. If the link does not open, use the resume command."
+  },
+  "app.037": {
+    "zh-CN": "项目路径",
+    "en": "project path"
+  },
+  "app.038": {
+    "zh-CN": "Cursor CLI 会话不在桌面聊天列表。请等当前执行结束后在终端继续；也可在 Cursor 打开同一项目查看、手动修改代码。",
+    "en": "Cursor CLI conversations do not appear in the desktop chat list. Wait for the current run to finish, then resume in a terminal. You can also open the same project in Cursor to inspect and edit its code."
+  },
+  "app.039": {
+    "zh-CN": "暂无可用助手",
+    "en": "No available assistants"
+  },
+  "app.040": {
+    "zh-CN": "等待连接",
+    "en": "Waiting for connection"
+  },
+  "app.041": {
+    "zh-CN": "暂无电脑项目",
+    "en": "No computer projects"
+  },
+  "app.042": {
+    "zh-CN": "{v0} 接口不支持指定对话；可在码得分组查看任务，但无法保证上下文隔离。",
+    "en": "{v0} cannot target a conversation. made can group tasks, but cannot guarantee separate context."
+  },
+  "app.043": {
+    "zh-CN": "助手会沿用这个任务的上下文。",
+    "en": "The assistant continues with this task's context."
+  },
+  "app.044": {
+    "zh-CN": "此助手以独立指令执行，不会自动记住此前的指令。",
+    "en": "This assistant runs each instruction independently and does not remember previous instructions."
+  },
+  "app.045": {
+    "zh-CN": "未命名任务",
+    "en": "Untitled task"
+  },
+  "app.046": {
+    "zh-CN": "待开始",
+    "en": "Not started"
+  },
+  "app.047": {
+    "zh-CN": "刚刚",
+    "en": "Just now"
+  },
+  "app.048": {
+    "zh-CN": "{v0} · 更新于 {v1}",
+    "en": "{v0} · Updated {v1}"
+  },
+  "app.049": {
+    "zh-CN": "收起",
+    "en": "Collapse"
+  },
+  "app.050": {
+    "zh-CN": "＋ 新建任务",
+    "en": "＋ New task"
+  },
+  "app.051": {
+    "zh-CN": "桥接服务暂时不可用。",
+    "en": "The bridge is temporarily unavailable."
+  },
+  "app.052": {
+    "zh-CN": "还没有新任务。旧任务可在下方“历史记录”中查看。",
+    "en": "No new tasks yet. View older tasks in “History” below."
+  },
+  "app.053": {
+    "zh-CN": "还没有任务。先选择助手和代码文件夹。",
+    "en": "No tasks yet. Select an assistant and a code folder first."
+  },
+  "app.054": {
+    "zh-CN": "正在读取任务…",
+    "en": "Loading tasks…"
+  },
+  "app.055": {
+    "zh-CN": "历史记录 · {v0} 条",
+    "en": "History · {v0} items"
+  },
+  "app.056": {
+    "zh-CN": "请选择任务",
+    "en": "Select a task"
+  },
+  "app.057": {
+    "zh-CN": "选择左侧任务，或新建一个任务。",
+    "en": "Select a task on the left, or create one."
+  },
+  "app.058": {
+    "zh-CN": "{v0} 当前接口不能指定对话。码得会将消息归在这个任务下，但无法保证助手对话的上下文隔离或续接。",
+    "en": "{v0} cannot target a conversation. made groups messages under this task, but cannot guarantee separate or continued context."
+  },
+  "app.059": {
+    "zh-CN": "请选择编程助手和代码文件夹。",
+    "en": "Select an assistant and a code folder."
+  },
+  "app.060": {
+    "zh-CN": "正在创建任务…",
+    "en": "Creating task…"
+  },
+  "app.061": {
+    "zh-CN": "任务已创建。第一句指令将成为标题。",
+    "en": "Task created. Your first instruction becomes its title."
+  },
+  "app.062": {
+    "zh-CN": "创建任务失败",
+    "en": "Could not create task"
+  },
+  "app.063": {
+    "zh-CN": "正在保存…",
+    "en": "Saving…"
+  },
+  "app.064": {
+    "zh-CN": "任务标题已更新。",
+    "en": "Task title updated."
+  },
+  "app.065": {
+    "zh-CN": "改标题失败",
+    "en": "Could not rename task"
+  },
+  "app.066": {
+    "zh-CN": "桥接服务暂时不可用",
+    "en": "Bridge temporarily unavailable"
+  },
+  "app.067": {
+    "zh-CN": "先选择或新建任务",
+    "en": "Select or create a task"
+  },
+  "app.068": {
+    "zh-CN": "每个任务都有自己的助手、代码文件夹和对话上下文。",
+    "en": "Each task has its own assistant, code folder, and conversation context."
+  },
+  "app.069": {
+    "zh-CN": "这个任务还没有指令",
+    "en": "No instructions in this task yet"
+  },
+  "app.070": {
+    "zh-CN": "在下方输入第一句话，或在码得上打开这个任务后说话。",
+    "en": "Enter your first instruction below, or open this task on made and speak."
+  },
+  "app.071": {
+    "zh-CN": "最近输入 · {v0}",
+    "en": "Latest input · {v0}"
+  },
+  "app.072": {
+    "zh-CN": "（空指令）",
+    "en": "(empty instruction)"
+  },
+  "app.073": {
+    "zh-CN": "你：{v0}",
+    "en": "You: {v0}"
+  },
+  "app.074": {
+    "zh-CN": "等待确认后开始执行。",
+    "en": "Execution starts after confirmation."
+  },
+  "app.075": {
+    "zh-CN": "已排队，等待助手启动。",
+    "en": "Queued, waiting for the assistant to start."
+  },
+  "app.076": {
+    "zh-CN": "等待助手回复。",
+    "en": "Waiting for the assistant's reply."
+  },
+  "app.077": {
+    "zh-CN": "{v0}：{v1}",
+    "en": "{v0}: {v1}"
+  },
+  "app.078": {
+    "zh-CN": "你的指令仍保留，尚未执行。请先停止并关闭桌面里打开的同一 Codex 对话，再点“再次确认”继续。",
+    "en": "Your instruction is saved and has not run. Stop and close this Codex conversation on the desktop, then choose “Confirm again”."
+  },
+  "app.079": {
+    "zh-CN": "暂无助手",
+    "en": "No assistants"
+  },
+  "app.080": {
+    "zh-CN": "请在桥接器启用助手插件",
+    "en": "Enable an assistant plugin in the bridge"
+  },
+  "app.081": {
+    "zh-CN": "连接后显示助手",
+    "en": "Assistants appear after connecting"
+  },
+  "app.082": {
+    "zh-CN": "任务 {v0}/{v1} · {v2}",
+    "en": "Task {v0}/{v1} · {v2}"
+  },
+  "app.083": {
+    "zh-CN": "暂无任务",
+    "en": "No tasks"
+  },
+  "app.084": {
+    "zh-CN": "点右上角 ＋ 新建任务",
+    "en": "Tap ＋ at the top right to create a task"
+  },
+  "app.085": {
+    "zh-CN": "待输入 · 单击 BOOT 说话",
+    "en": "Ready · Press BOOT to speak"
+  },
+  "app.086": {
+    "zh-CN": "请启动电脑桥接服务。",
+    "en": "Start the bridge on your computer."
+  },
+  "app.087": {
+    "zh-CN": "请在电脑工作台启用此助手。",
+    "en": "Enable this assistant on the computer dashboard."
+  },
+  "app.088": {
+    "zh-CN": "在电脑工作台设置语音识别。",
+    "en": "Configure speech recognition on the computer dashboard."
+  },
+  "app.089": {
+    "zh-CN": "点右上角 ＋ 新建任务，第一句话会成为标题。",
+    "en": "Tap ＋ at the top right to create a task. Your first instruction becomes its title."
+  },
+  "app.090": {
+    "zh-CN": "单击 BOOT 说话。左右滑动换助手；长按 BOOT 退出。",
+    "en": "Press BOOT to speak. Swipe left or right to switch assistants; hold BOOT to exit."
+  },
+  "app.091": {
+    "zh-CN": "{v0} · 你：{v1}",
+    "en": "{v0} · You: {v1}"
+  },
+  "app.092": {
+    "zh-CN": "\n\n更多内容请在电脑任务页查看",
+    "en": "\n\nView more on the computer's Tasks page"
+  },
+  "app.093": {
+    "zh-CN": "任务过长，请在电脑任务页核对并确认",
+    "en": "This instruction is too long. Review and confirm it on the computer's Tasks page."
+  },
+  "app.094": {
+    "zh-CN": "双击 BOOT 确认 · 三击取消",
+    "en": "Double-press BOOT to confirm · Triple-press to cancel"
+  },
+  "app.095": {
+    "zh-CN": "（无任务内容）",
+    "en": "(no task content)"
+  },
+  "app.096": {
+    "zh-CN": "已排队，等待助手启动",
+    "en": "Queued, waiting for the assistant"
+  },
+  "app.097": {
+    "zh-CN": "等待助手回复",
+    "en": "Waiting for a reply"
+  },
+  "app.098": {
+    "zh-CN": "桥接离线",
+    "en": "Bridge offline"
+  },
+  "app.099": {
+    "zh-CN": "本机桥接在线",
+    "en": "Local bridge online"
+  },
+  "app.100": {
+    "zh-CN": "正在连接",
+    "en": "Connecting"
+  },
+  "app.101": {
+    "zh-CN": "本机桥接服务",
+    "en": "Local bridge service"
+  },
+  "app.102": {
+    "zh-CN": "离线",
+    "en": "Offline"
+  },
+  "app.103": {
+    "zh-CN": "在线",
+    "en": "Online"
+  },
+  "app.104": {
+    "zh-CN": "连接中",
+    "en": "Connecting"
+  },
+  "app.105": {
+    "zh-CN": "独立语音识别",
+    "en": "Speech recognition"
+  },
+  "app.106": {
+    "zh-CN": "语音识别已就绪",
+    "en": "Speech recognition ready"
+  },
+  "app.107": {
+    "zh-CN": "请完成语音输入设置",
+    "en": "Complete speech input settings"
+  },
+  "app.108": {
+    "zh-CN": "码得通信入口",
+    "en": "made connection endpoint"
+  },
+  "app.109": {
+    "zh-CN": "已开启",
+    "en": "Enabled"
+  },
+  "app.110": {
+    "zh-CN": "未开启",
+    "en": "Disabled"
+  },
+  "app.111": {
+    "zh-CN": "码得在线",
+    "en": "made devices online"
+  },
+  "app.112": {
+    "zh-CN": "{v0} / {v1} 台",
+    "en": "{v0} / {v1} devices"
+  },
+  "app.113": {
+    "zh-CN": "码得 USB 直连",
+    "en": "made direct USB"
+  },
+  "app.114": {
+    "zh-CN": "USB 接收端",
+    "en": "USB receiver"
+  },
+  "app.115": {
+    "zh-CN": "已连接",
+    "en": "Connected"
+  },
+  "app.116": {
+    "zh-CN": "USB 连接",
+    "en": "USB connection"
+  },
+  "app.117": {
+    "zh-CN": "等待打开码得",
+    "en": "Waiting for made to open"
+  },
+  "app.118": {
+    "zh-CN": "电脑桥接器离线，暂时无法检测 USB 连接。",
+    "en": "The computer bridge is offline. USB connections cannot be checked right now."
+  },
+  "app.119": {
+    "zh-CN": "码得 USB 直连已连接{v0}。不用 Wi-Fi；首次使用请点击“添加码得”并核对六位码。",
+    "en": "made is connected through USB{v0}. No Wi-Fi needed. For first-time setup, select “Add made” and compare the six-digit code."
+  },
+  "app.120": {
+    "zh-CN": "接收端已连接{v0}。码得可连接下面的专用热点。",
+    "en": "Receiver connected{v0}. made can join the dedicated hotspot below."
+  },
+  "app.121": {
+    "zh-CN": "码得 USB 已连接，应用已退出。重新打开码得即可连接。",
+    "en": "made USB is connected, but the app is closed. Open made to reconnect."
+  },
+  "app.122": {
+    "zh-CN": "检测到 USB 串口，等待设备握手。请在码得接入设置选择“USB”并打开应用。",
+    "en": "USB serial port detected; waiting for the device handshake. Select “USB” in made connection settings and open the app."
+  },
+  "app.123": {
+    "zh-CN": "尚未连接 USB 设备：{v0}",
+    "en": "No USB device connected: {v0}"
+  },
+  "app.124": {
+    "zh-CN": "尚未连接 USB 设备。插入码得或已烧录的 ESP32-S3 / C3 接收端后会自动检测。",
+    "en": "No USB device connected. Plug in made or a flashed ESP32-S3 / C3 receiver for automatic detection."
+  },
+  "app.125": {
+    "zh-CN": "未启用 USB 连接；可使用同 Wi-Fi 或公网连接。",
+    "en": "USB is disabled. You can connect through the same Wi-Fi or a public address."
+  },
+  "app.126": {
+    "zh-CN": "当前是码得 USB 直连，不需要 SSID 和密码。使用另一块无屏接收端时，将它插入电脑，热点名称和密码才会显示在这里。配对列表的在线状态根据码得实际请求更新。",
+    "en": "Direct USB needs no SSID or password. When using a separate receiver without a screen, plug it into the computer to see its hotspot details here. The pairing list shows device activity from actual requests."
+  },
+  "app.127": {
+    "zh-CN": "独立接收端无需屏幕：用 USB 插入电脑后，这里自动显示热点名称和密码，点击“显示”查看密码。在码得内打开“齿轮 → 连接 → 接收端”，扫描并点选热点，再输入这里显示的密码并保存；无需退出到桌面设置。新固件的热点密码为 8 位数字，六位配对码随后单独核对。正常重启后无需重填。电脑上需运行本机桥接器。",
+    "en": "The receiver needs no screen. Plug it into USB to see its hotspot name and password here; select “Show” to reveal the password. In made, open Settings → Connection → Receiver, scan and select the hotspot, then enter its password and save. No need to leave the app. New receiver firmware uses an eight-digit Wi-Fi password; compare the separate six-digit pairing code afterward. Details survive normal restarts. The bridge must run on the computer."
+  },
+  "app.128": {
+    "zh-CN": "隐藏",
+    "en": "Hide"
+  },
+  "app.129": {
+    "zh-CN": "显示",
+    "en": "Show"
+  },
+  "app.130": {
+    "zh-CN": "留空使用 {v0} 默认模型",
+    "en": "Leave blank to use the default {v0} model"
+  },
+  "app.131": {
+    "zh-CN": "当前助手插件没有可在桥接器中配置的模型。",
+    "en": "The installed assistant plugins have no model settings available in the bridge."
+  },
+  "app.132": {
+    "zh-CN": "、",
+    "en": ", "
+  },
+  "app.133": {
+    "zh-CN": "{v0} 的插件不支持指定模型，请在对应助手中设置。",
+    "en": "{v0} cannot select a model through their plugins; configure it in the assistant itself. "
+  },
+  "app.134": {
+    "zh-CN": "{v0}模型名称需由对应助手账号支持。",
+    "en": "{v0}Your assistant account must support the selected model."
+  },
+  "app.135": {
+    "zh-CN": "模型选择已保存，下一条指令生效。",
+    "en": "Model selection saved. It applies to the next instruction."
+  },
+  "app.136": {
+    "zh-CN": "保存失败",
+    "en": "Save failed"
+  },
+  "app.137": {
+    "zh-CN": "桥接离线，暂时无法读取",
+    "en": "Bridge offline; settings unavailable"
+  },
+  "app.138": {
+    "zh-CN": "保存后启用兼容音频转写接口。",
+    "en": "Saving enables the compatible audio transcription interface."
+  },
+  "app.139": {
+    "zh-CN": "请填写接口 URL、API Key 和模型名。",
+    "en": "Enter the endpoint URL, API Key, and model name."
+  },
+  "app.140": {
+    "zh-CN": "已配置 · API Key 由电脑环境变量提供。",
+    "en": "Configured · API Key supplied by a computer environment variable."
+  },
+  "app.141": {
+    "zh-CN": "已配置 · 密钥保存在这台电脑。",
+    "en": "Configured · Key stored on this computer."
+  },
+  "app.142": {
+    "zh-CN": "已清除网页保存的密钥，电脑环境变量中的密钥仍在生效。",
+    "en": "The key saved through this page was cleared. The computer environment variable still supplies a key."
+  },
+  "app.143": {
+    "zh-CN": "已清除电脑保存的密钥。",
+    "en": "The key stored on this computer was cleared."
+  },
+  "app.144": {
+    "zh-CN": "语音设置已保存，下一次录音生效。",
+    "en": "Speech settings saved. They apply to the next recording."
+  },
+  "app.145": {
+    "zh-CN": "语音设置失败",
+    "en": "Could not save speech settings"
+  },
+  "app.146": {
+    "zh-CN": "{v0} 分 {v1} 秒",
+    "en": "{v0} min {v1} sec"
+  },
+  "app.147": {
+    "zh-CN": "电脑桥接暂时离线，恢复后可添加码得。",
+    "en": "The bridge is offline. You can add made after it reconnects."
+  },
+  "app.148": {
+    "zh-CN": "{v0} 台码得等待确认。请核对设备和电脑上的数字。",
+    "en": "{v0} made devices await confirmation. Compare the codes on the device and computer."
+  },
+  "app.149": {
+    "zh-CN": " · 剩余 {v0}",
+    "en": " · {v0} remaining"
+  },
+  "app.150": {
+    "zh-CN": "正在等待码得连接{v0}。USB 直连只需插线；其它方式请在码得接入设置中选好 Wi-Fi、接收端或公网地址，然后核对六位码。",
+    "en": "Waiting for made to connect{v0}. Direct USB only needs a cable. For other methods, select Wi-Fi, Receiver, or a public address in made connection settings, then compare the six-digit code."
+  },
+  "app.151": {
+    "zh-CN": "上滑解锁码得后会自动重连；锁屏和退出应用时不报告心跳，约 30 秒后显示离线。添加新设备时，点击“添加码得”。",
+    "en": "Swipe up to unlock made and reconnect. Locking or exiting stops heartbeats; the device appears offline after about 30 seconds. To pair another device, choose “Add made”."
+  },
+  "app.152": {
+    "zh-CN": "先点击“添加码得”，再在码得的接入设置中选择“USB”、同 Wi-Fi、接收端或公网，两端核对六位码。",
+    "en": "Choose “Add made”, then select USB, same Wi-Fi, Receiver, or a public address in made connection settings. Compare the six-digit code on both sides."
+  },
+  "app.153": {
+    "zh-CN": "码得 {v0}",
+    "en": "made {v0}"
+  },
+  "app.154": {
+    "zh-CN": " · 最近通信 {v0}",
+    "en": " · Last seen {v0}"
+  },
+  "app.155": {
+    "zh-CN": "移除",
+    "en": "Remove"
+  },
+  "app.156": {
+    "zh-CN": "移除 {v0} 并撤销连接",
+    "en": "Remove {v0} and revoke access"
+  },
+  "app.157": {
+    "zh-CN": "等待配对 · 码得",
+    "en": "Pairing request · made"
+  },
+  "app.158": {
+    "zh-CN": "任务 · 码得",
+    "en": "Tasks · made"
+  },
+  "app.159": {
+    "zh-CN": "助手 · 码得",
+    "en": "Assistants · made"
+  },
+  "app.160": {
+    "zh-CN": "大盘 · 码得",
+    "en": "Dashboard · made"
+  },
+  "app.161": {
+    "zh-CN": "{v0}请求连接",
+    "en": "{v0} wants to connect"
+  },
+  "app.162": {
+    "zh-CN": "接入方式：码得 USB 直连。请与码得显示的六位码核对。",
+    "en": "Connection: made direct USB. Compare this six-digit code with the device."
+  },
+  "app.163": {
+    "zh-CN": "未知",
+    "en": "Unknown"
+  },
+  "app.164": {
+    "zh-CN": "请求接入地址：{v0}。请与码得显示的接入地址一并核对。",
+    "en": "Requested endpoint: {v0}. Also compare this address with the one shown on made."
+  },
+  "app.165": {
+    "zh-CN": "本次请求有效期内",
+    "en": "the request's validity period"
+  },
+  "app.166": {
+    "zh-CN": "请在 {v0}完成确认",
+    "en": "Confirm within {v0}"
+  },
+  "app.167": {
+    "zh-CN": "已开始发现码得，请在设备上打开码得。",
+    "en": "Discovery started. Open made on the device."
+  },
+  "app.168": {
+    "zh-CN": "已结束添加设备。",
+    "en": "Finished adding devices."
+  },
+  "app.169": {
+    "zh-CN": "配对设置失败",
+    "en": "Could not update pairing settings"
+  },
+  "app.170": {
+    "zh-CN": "码得已配对，后续会自动连接。",
+    "en": "made is paired and will reconnect automatically."
+  },
+  "app.171": {
+    "zh-CN": "已拒绝这次连接。",
+    "en": "Connection rejected."
+  },
+  "app.172": {
+    "zh-CN": "配对操作失败",
+    "en": "Pairing action failed"
+  },
+  "app.173": {
+    "zh-CN": "这台码得",
+    "en": "this made device"
+  },
+  "app.174": {
+    "zh-CN": "确定移除“{v0}”吗？移除后设备需要重新配对才能控制电脑。",
+    "en": "Remove “{v0}”? The device must pair again before it can control the computer."
+  },
+  "app.175": {
+    "zh-CN": "已移除设备并撤销连接。",
+    "en": "Device removed and access revoked."
+  },
+  "app.176": {
+    "zh-CN": "移除设备失败",
+    "en": "Could not remove device"
+  },
+  "app.177": {
+    "zh-CN": "注册并安装 Tailscale，在这台电脑上登录。保存此接入方式后开启穿透，首次按提示授权 Funnel；这里无需填写 API Key，获批的 ts.net HTTPS 地址会显示在下方。",
+    "en": "Sign up, install Tailscale, and sign in on this computer. Save this connection method and start the tunnel, then authorize Funnel when prompted. No API Key is needed here; the verified ts.net HTTPS address appears below."
+  },
+  "app.178": {
+    "zh-CN": "注册并安装 ngrok Agent，从控制台复制 Authtoken 填入下方。HTTPS 地址可留空由平台分配；已有预留域名时再填写。保存后开启穿透。",
+    "en": "Sign up and install ngrok Agent, then copy your Authtoken from the dashboard into the field below. Leave the HTTPS address blank for an assigned address, or enter a reserved domain. Save and start the tunnel."
+  },
+  "app.179": {
+    "zh-CN": "注册并安装花生壳客户端，保持登录。在管理台创建指向 127.0.0.1:8788 的 HTTPS/443 映射，再将公网域名和 API Key 填入下方。桥接器只启停已有映射，不会代购套餐。",
+    "en": "Sign up, install the Oray client, and keep it signed in. In its console, create an HTTPS/443 mapping to 127.0.0.1:8788, then enter the public domain and API Key below. The bridge enables or disables an existing mapping; it does not purchase a plan."
+  },
+  "app.180": {
+    "zh-CN": "注册并将域名接入 Cloudflare，在控制台创建 Tunnel，将 HTTPS 域名转发到 http://127.0.0.1:8788；在电脑上安装 cloudflared。把域名和 Tunnel 令牌填入下方，保存后开启。",
+    "en": "Sign up and add your domain to Cloudflare. Create a Tunnel in the dashboard and route the HTTPS domain to http://127.0.0.1:8788; install cloudflared on this computer. Enter the domain and Tunnel token below, save, and start it."
+  },
+  "app.181": {
+    "zh-CN": "无需注册、域名或令牌。先安装 cloudflared，再保存设置并开启穿透；临时 HTTPS 地址会显示在下方，每次重开时可能变化。",
+    "en": "No account, domain, or token is needed. Install cloudflared, save these settings, and start the tunnel. A temporary HTTPS address appears below and may change each time you restart it."
+  },
+  "app.182": {
+    "zh-CN": "令牌已保存在这台电脑；留空可保持不变。",
+    "en": "Token saved on this computer. Leave blank to keep it."
+  },
+  "app.183": {
+    "zh-CN": "尚未保存 Tunnel 令牌。",
+    "en": "No Tunnel token saved."
+  },
+  "app.184": {
+    "zh-CN": "Authtoken 已保存在这台电脑；留空可保持不变。",
+    "en": "Authtoken saved on this computer. Leave blank to keep it."
+  },
+  "app.185": {
+    "zh-CN": "尚未保存 ngrok Authtoken。",
+    "en": "No ngrok Authtoken saved."
+  },
+  "app.186": {
+    "zh-CN": "API Key 已保存在这台电脑；留空可保持不变。",
+    "en": "API Key saved on this computer. Leave blank to keep it."
+  },
+  "app.187": {
+    "zh-CN": "尚未保存花生壳 API Key。",
+    "en": "No Oray API Key saved."
+  },
+  "app.188": {
+    "zh-CN": "关闭花生壳映射",
+    "en": "Disable Oray mapping"
+  },
+  "app.189": {
+    "zh-CN": "检查并关闭映射",
+    "en": "Check and disable mapping"
+  },
+  "app.190": {
+    "zh-CN": "清理残留路由",
+    "en": "Clean up remaining route"
+  },
+  "app.191": {
+    "zh-CN": "关闭穿透",
+    "en": "Stop tunnel"
+  },
+  "app.192": {
+    "zh-CN": "桥接服务暂时离线。",
+    "en": "The bridge is temporarily offline."
+  },
+  "app.193": {
+    "zh-CN": "接入设置有改动，请先保存，再开启穿透。",
+    "en": "Connection settings changed. Save them before starting the tunnel."
+  },
+  "app.194": {
+    "zh-CN": "Cloudflare Tunnel 已连接。请确认域名路由指向本机码得接口，再在码得上填写下方地址。",
+    "en": "Cloudflare Tunnel connected. Check that the domain routes to this computer's made endpoint, then enter the address below on made."
+  },
+  "app.195": {
+    "zh-CN": "公网接入已开启。码得打开“齿轮 → 连接 → 手机配置”，用手机扫码后粘贴下方 HTTPS 地址；也可在设备上手动填写。连接时按提示核对六位配对码。",
+    "en": "Public access is enabled. On made, open Settings → Connect → Phone setup, scan with your phone, and paste the HTTPS address below. You can also enter it on the device. Verify the six-digit pairing code when prompted."
+  },
+  "app.196": {
+    "zh-CN": "正在启动 Tailscale Funnel。首次使用请在弹出的浏览器完成授权，确认公开路由后才会显示地址…",
+    "en": "Starting Tailscale Funnel. On first use, authorize it in the browser that opens. The address appears after the public route is verified…"
+  },
+  "app.197": {
+    "zh-CN": "正在启动 ngrok，核对实际公网地址和转发目标…",
+    "en": "Starting ngrok and checking the public address and forwarding target…"
+  },
+  "app.198": {
+    "zh-CN": "正在检查花生壳映射与公网地址…",
+    "en": "Checking the Oray mapping and public address…"
+  },
+  "app.199": {
+    "zh-CN": "正在建立公网连接，地址生成后会显示在这里…",
+    "en": "Opening public access. The address will appear here when ready…"
+  },
+  "app.200": {
+    "zh-CN": "正在关闭公网连接…",
+    "en": "Closing public access…"
+  },
+  "app.201": {
+    "zh-CN": "公网连接失败，请重新开启。",
+    "en": "Public connection failed. Try starting it again."
+  },
+  "app.202": {
+    "zh-CN": "公网接入已关闭；局域网自动发现仍可使用。",
+    "en": "Public access is off. Automatic discovery on the local network remains available."
+  },
+  "app.203": {
+    "zh-CN": "公网地址已验证，可在码得上填写。",
+    "en": "Public address verified. You can enter it on made."
+  },
+  "app.204": {
+    "zh-CN": "正在建立公网连接，生成地址后可在码得上填写。",
+    "en": "Opening public access. Enter the address on made once it appears."
+  },
+  "app.205": {
+    "zh-CN": "已关闭公网接入。",
+    "en": "Public access is off."
+  },
+  "app.206": {
+    "zh-CN": "关闭结果尚未确认，请查看公网接入状态。",
+    "en": "Shutdown is not yet confirmed. Check the public access status."
+  },
+  "app.207": {
+    "zh-CN": "公网接入操作失败",
+    "en": "Public access action failed"
+  },
+  "app.208": {
+    "zh-CN": "公网接入设置已保存。",
+    "en": "Public access settings saved."
+  },
+  "app.209": {
+    "zh-CN": "公网接入设置失败",
+    "en": "Could not save public access settings"
+  },
+  "app.210": {
+    "zh-CN": "连接桥接服务后显示可用助手。",
+    "en": "Connect to the bridge to see available assistants."
+  },
+  "app.211": {
+    "zh-CN": "尚未启用助手插件。",
+    "en": "No assistant plugins enabled."
+  },
+  "app.212": {
+    "zh-CN": "正在连接桥接服务…",
+    "en": "Connecting to the bridge…"
+  },
+  "app.213": {
+    "zh-CN": "可转交任务",
+    "en": "Can hand off tasks"
+  },
+  "app.214": {
+    "zh-CN": "本机可用",
+    "en": "Available locally"
+  },
+  "app.215": {
+    "zh-CN": "暂不可用",
+    "en": "Unavailable"
+  },
+  "app.216": {
+    "zh-CN": "热点名称",
+    "en": "hotspot name"
+  },
+  "app.217": {
+    "zh-CN": "热点密码",
+    "en": "hotspot password"
+  },
+  "app.218": {
+    "zh-CN": "桥接地址",
+    "en": "bridge address"
+  },
+  "app.219": {
+    "zh-CN": "公网地址",
+    "en": "public address"
+  },
+  "app.220": {
+    "zh-CN": "已填入接口和模型；检查后点击“保存语音设置”。",
+    "en": "Endpoint and model filled in. Review them, then choose “Save speech settings”."
+  },
+  "app.221": {
+    "zh-CN": "请先选择任务，再填写下一条指令。",
+    "en": "Select a task, then enter the next instruction."
+  },
+  "app.222": {
+    "zh-CN": "正在发送指令…",
+    "en": "Sending instruction…"
+  },
+  "app.223": {
+    "zh-CN": "指令已回显，请核对并确认。",
+    "en": "Instruction is ready. Review and confirm it."
+  },
+  "app.224": {
+    "zh-CN": "指令已回显，等待你的确认。",
+    "en": "Instruction received, awaiting your confirmation."
+  },
+  "app.225": {
+    "zh-CN": "创建失败",
+    "en": "Creation failed"
+  },
+  "tunnel.official.title": {
+    "zh-CN": "官方入口",
+    "en": "Official links"
+  },
+  "tunnel.official.signup": {
+    "zh-CN": "注册账号",
+    "en": "Sign up"
+  },
+  "tunnel.official.console": {
+    "zh-CN": "管理控制台",
+    "en": "Console"
+  },
+  "tunnel.official.download": {
+    "zh-CN": "下载客户端",
+    "en": "Download client"
+  },
+  "tunnel.official.guide": {
+    "zh-CN": "配置指南",
+    "en": "Setup guide"
+  },
+  "tunnel.official.authtoken": {
+    "zh-CN": "控制台 / Authtoken",
+    "en": "Console / Authtoken"
+  },
+  "tunnel.official.websiteSignup": {
+    "zh-CN": "官网 / 注册",
+    "en": "Website / Sign up"
+  },
+  "tunnel.official.newTab": {
+    "zh-CN": "在新窗口打开官方网站",
+    "en": "Open the official website in a new window"
+  },
+  "plug.001": { "zh-CN": "管控插件", "en": "Board plugin" },
+  "plug.002": { "zh-CN": "助手插件", "en": "Assistant plugin" },
+  "plug.003": { "zh-CN": "已启用", "en": "Enabled" },
+  "plug.004": { "zh-CN": "已停用", "en": "Disabled" },
+  "plug.005": { "zh-CN": "未就绪", "en": "Not ready" },
+  "plug.006": { "zh-CN": "停用", "en": "Disable" },
+  "plug.007": { "zh-CN": "启用", "en": "Enable" },
+  "plug.008": { "zh-CN": "移除", "en": "Remove" },
+  "plug.009": { "zh-CN": "应用到码得", "en": "Apply to made" },
+  "plug.010": { "zh-CN": "删除", "en": "Delete" },
+  "plug.011": { "zh-CN": "插件目录里还没有插件。把 .mjs 文件放进 ~/made/plugins 后点刷新。", "en": "The plugins folder is empty. Put an .mjs file in ~/made/plugins and refresh." },
+  "plug.029": { "zh-CN": "还没有管控插件。", "en": "No board plugins yet." },
+  "plug.030": { "zh-CN": "还没有助手插件。", "en": "No assistant plugins yet." },
+  "plug.012": { "zh-CN": "主题目录里还没有主题。", "en": "The themes folder is empty." },
+  "plug.013": { "zh-CN": "提示音", "en": "Chime" },
+  "plug.014": { "zh-CN": "锁屏图标", "en": "Lock icon" },
+  "plug.015": { "zh-CN": "锁屏背景", "en": "Lock background" },
+  "plug.016": { "zh-CN": "确定移除插件「{v0}」？文件会从插件目录删除。", "en": "Remove plugin “{v0}”? Its file will be deleted from the plugins folder." },
+  "plug.017": { "zh-CN": "确定删除主题「{v0}」？", "en": "Delete theme “{v0}”?" },
+  "plug.018": { "zh-CN": "已下发到 {v0} 台码得", "en": "Sent to {v0} made device(s)" },
+  "plug.019": { "zh-CN": "插件状态已更新", "en": "Plugin status updated" },
+  "plug.020": { "zh-CN": "主题已删除", "en": "Theme deleted" },
+  "plug.021": { "zh-CN": "插件已移除", "en": "Plugin removed" },
+  "plug.022": { "zh-CN": "正在读取插件和主题…", "en": "Reading plugins and themes…" },
+  "plug.023": { "zh-CN": "无法加载", "en": "Could not load" },
+  "plug.024": { "zh-CN": "事件", "en": "Events" },
+  "plug.025": { "zh-CN": "命令", "en": "Commands" },
+  "plug.026": { "zh-CN": "保存配置", "en": "Save settings" },
+  "plug.027": { "zh-CN": "配置已保存。已经连上的码得会按新配置重新计时。", "en": "Settings saved. A connected made reschedules with the new settings." },
+  "plug.028": { "zh-CN": "配置项来自插件目录里的 plugin.json，当前值写在同目录的 settings.json。", "en": "Fields come from plugin.json in the plugin folder. Current values are stored in settings.json beside it." },
+  "plug.031": { "zh-CN": "返回", "en": "Back" },
+  "plug.032": { "zh-CN": "这个插件没有可配置项。", "en": "This plugin has no settings." }
+};