loki-mode 7.18.3 → 7.19.1

package/docs/VERIFIED-COMPLETION-PLAN.md

@@ -0,0 +1,462 @@
+# Verified Completion Plan (v7.19.1, MINOR)
+
+Status: DESIGN ONLY. No implementation, no version bump, no commit.
+Author: Architect (Loki Mode "verified completion" release)
+Target version: 7.19.1 (current VERSION is 7.19.0)
+
+---
+
+## 1. Goal and threat model
+
+Loki must PROVE a run is actually done before the completion council lets the run
+STOP. It must refuse to accept a fabricated "done." Concretely, block the
+completion-approval path unless there is REAL on-disk evidence that:
+
+- (a) **files actually changed** -- a nonzero git diff between the run-start SHA
+  and HEAD, AND
+- (b) **tests actually passed** -- a green test-results signal (where a test
+  suite exists).
+
+This attacks the #2 documented user trust-killer: agents claiming "done" when
+nothing shipped.
+
+Default-on, opt-out via `LOKI_EVIDENCE_GATE=0`, because a false block would stop
+a legitimate completion (high cost). The design is built around the principle:
+**block only on positive evidence of fabrication; treat inconclusive as
+pass-through.**
+
+### Honest limit (state plainly)
+
+This gate proves "something changed and the test suite is green." It does NOT
+prove PRD-semantic correctness -- it cannot tell whether the right thing was
+built, only that *a* thing was built and tests pass. Semantic judgment stays
+with the council votes and the Devil's Advocate. The evidence gate is a cheap,
+deterministic floor under the expensive, fallible LLM votes -- not a replacement
+for them.
+
+---
+
+## 2. Verified terrain (re-grepped; line numbers drift)
+
+Confirmed by reading source, not assumed:
+
+- **Bash is the live council.** `autonomy/run.sh` sources
+  `autonomy/completion-council.sh` (run.sh:617-619) and calls
+  `council_should_stop` (run.sh:12382). `loki-ts/src/runner/council.ts` is a
+  port slice ("second slice of completion-council.sh port", council.ts:1-9) and
+  is NOT wired into the runtime loop. **No Bun/TS change is needed for this
+  release** (see Section 7).
+
+- **`council_evaluate`** (completion-council.sh ~1511-1591): Phase 1
+  `council_reverify_checklist` (~1519); Phase 2 `council_checklist_gate`
+  (~1522, HARD gate, `return 1` blocks STOP); Phase 3 aggregate votes; Phase 4
+  unanimous + Devil's Advocate. Returns 0 = COMPLETE/STOP, 1 = CONTINUE.
+
+- **`council_checklist_gate`** (~804-894): reads
+  `.loki/checklist/verification-results.json` and `.loki/checklist/waivers.json`;
+  `return 0` = pass (no file => no gate, backwards compatible), `return 1` =
+  block; on block writes `$COUNCIL_STATE_DIR/gate-block.json` (atomic
+  temp+mv); on pass removes a stale `gate-block.json`. **This is the pattern we
+  clone.** `COUNCIL_STATE_DIR` = `<loki_dir>/council` (set at
+  completion-council.sh:119).
+
+- **`council_should_stop`** (~1811-1914): the only place that writes the
+  `COMPLETED` marker on real approval is the `if council_evaluate` branch
+  (completion-council.sh:1863). The two force-stop safety valves -- stagnation
+  (1899-1903) and done-signal (1907-1911, "agent keeps saying done") -- `return 0`
+  but do **NOT** write `COMPLETED`. They are *give-up / resource-protection*
+  exits, not *approved-done* claims. (Verified: the only `COMPLETED` writes are
+  completion-council.sh:1863 and run.sh:12773; neither valve writes it.)
+
+- **Second approval path (force-review).** `run.sh:12762-12784` handles a
+  dashboard-triggered `COUNCIL_REVIEW_REQUESTED` signal. It already calls
+  `council_checklist_gate` before approving (run.sh:12766) and writes `COMPLETED`
+  directly (run.sh:12773), bypassing `council_evaluate`. **This is a second
+  insertion point** the gate must cover for parity (see Section 1, insertion B).
+
+- **Per-iteration SHA exists; run-start SHA does NOT.** run.sh:11560 captures
+  `_LOKI_ITER_START_SHA=$(git rev-parse HEAD)` per attempt; there is no run-wide
+  baseline. We must capture one (Section 2-design).
+
+- **`_git_diffstat` is NOT a bash helper.** It is a Python function inside
+  `autonomy/lib/proof-generator.py:199`, reading `_LOKI_ITER_START_SHA` and
+  diffing `base..HEAD` (committed only). It is not callable from bash. (See
+  Section 3 deviation note for the mechanism we actually use.)
+
+- **The authoritative green-test signal is `.loki/quality/test-results.json`,
+  NOT `verification-results.json`.** Written by `enforce_test_coverage`
+  (run.sh:6220-6396), shape:
+  `{"timestamp","runner","pass":true|false,"min_coverage","summary"}`, with the
+  special **no-suite** case `{"runner":"none","pass":true,"summary":"No test
+  runner detected"}` (run.sh:6373-6379). `enforce_test_coverage` runs earlier in
+  the same iteration (run.sh:12231, gated by `PHASE_UNIT_TESTS`, default true),
+  before the council check (run.sh:12382), so this file is reasonably fresh.
+  (See Section 3 deviation note for why we do NOT use verification-results.json
+  for the test signal.)
+
+---
+
+## 3. Deviations from the task's stated terrain (flagged, not papered over)
+
+The task instructed reuse of two things that, on reading source, do not work as
+described. Stating both:
+
+### Deviation A -- test-green source
+
+Task said: read tests-green from `.loki/checklist/verification-results.json`,
+"reuse the existing parse." **Insufficient.** That file (written by
+checklist-verify.py:336-358) stores per item only `id`, `title`, `priority`,
+`status` (`verified|failing|pending`). It does NOT store the check `type`, so it
+cannot distinguish a real test (`tests_pass`/`command` check) from a
+`file_exists` check. Using it would conflate "a file exists" with "tests pass."
+
+**Decision:** use `.loki/quality/test-results.json` (`runner`/`pass`) as the
+authoritative green-test signal. It records the actual runner that ran and a
+boolean pass, and explicitly encodes the no-suite case (`runner:"none"`). This is
+still "reuse existing on-disk evidence" -- just the correct file.
+
+### Deviation B -- git diff helper
+
+Task said: reuse `_git_diffstat`. **Not callable from bash** (it is a Python
+function in proof-generator.py keyed on `_LOKI_ITER_START_SHA`, the per-iteration
+baseline, and counts only committed changes).
+
+**Decision:** the gate computes the diff inline with
+`git diff --numstat <start-sha> HEAD`, matching the existing council convergence
+convention already in completion-council.sh (`git diff --stat HEAD` at ~165,
+`git diff --name-only HEAD` at ~208). We diff against the **run-start** SHA, not
+the per-iteration SHA, because Loki auto-commits per iteration -- by the time the
+council runs, the per-iteration working tree is clean and `git diff HEAD` is
+empty even on a productive run. The run-start baseline is the only SHA that
+answers "did this run ship anything." We count committed changes
+(`<start-sha>..HEAD`), which is correct post-auto-commit; if uncommitted changes
+remain they are additive evidence, not required.
+
+---
+
+## 4. Design
+
+### 4-design.1 -- Capture the run-start SHA (fresh-run aware)
+
+Add, in `run_autonomous()` (run.sh ~11412, AFTER `load_state`, BEFORE the
+`while [ $retry -lt $MAX_RETRIES ]` loop at run.sh:11495), a capture that
+persists to `.loki/state/start-sha`.
+
+**Critical lifecycle rule (do NOT "set if absent" alone).** A naive "set only if
+the file is missing" makes the gate toothless on any repo Loki has run before:
+the stale baseline from the *first* run persists, so on every later run
+`base..HEAD` shows the entire prior history => nonzero diff => gate passes
+trivially even if the new run shipped nothing. The baseline must be (re)captured
+on a **fresh run** and preserved only on a **genuine resume**.
+
+The fresh-vs-resume signal already exists: `load_state` (run.sh:9790-9834)
+restores `ITERATION_COUNT` from `.loki/autonomy-state.json`. After `load_state`:
+
+- `ITERATION_COUNT == 0` => fresh run (new invocation, or state was
+  reset/corrupted) => **recapture** start-sha (overwrite).
+- `ITERATION_COUNT > 0` => genuine resume of an in-flight run => **keep** the
+  existing start-sha (do not move the baseline mid-run).
+
+This also naturally handles the "previously COMPLETED, now re-run" case: a
+re-run after completion starts a fresh invocation with `ITERATION_COUNT == 0`
+(the prior `.loki/COMPLETED` is removed on the reset path at run.sh:3186), so the
+baseline is recaptured at HEAD-of-this-run.
+
+Capture details:
+- `git rev-parse HEAD` in `${TARGET_DIR:-.}`; on non-git or failure, write an
+  empty file, which the gate treats as inconclusive => pass-through.
+- Export `_LOKI_RUN_START_SHA` for the current process so the gate reads it
+  without a file round-trip; the file is the durable source of truth across
+  resumes.
+
+Pseudocode (illustrative, not final code):
+
+```
+local _start_sha_file=".loki/state/start-sha"
+mkdir -p ".loki/state"
+if [ "${ITERATION_COUNT:-0}" -eq 0 ] || [ ! -s "$_start_sha_file" ]; then
+    # Fresh run (or no baseline yet): (re)capture HEAD as the run baseline.
+    (cd "${TARGET_DIR:-.}" && git rev-parse HEAD 2>/dev/null) > "$_start_sha_file" 2>/dev/null || true
+fi
+# else: genuine resume (ITERATION_COUNT > 0) -- keep the existing baseline.
+_LOKI_RUN_START_SHA="$(cat "$_start_sha_file" 2>/dev/null || echo "")"
+export _LOKI_RUN_START_SHA
+```
+
+Edge case: a brand-new repo with zero commits has no HEAD => empty SHA =>
+inconclusive => pass-through (do not block a legit first-commit run on a baseline
+we never had).
+
+### 4-design.2 -- `council_evidence_gate` (cloned from `council_checklist_gate`)
+
+New function in completion-council.sh, placed immediately after
+`council_checklist_gate` (after ~894). Contract identical to the checklist gate:
+
+- `return 0` => gate passes (OK to complete).
+- `return 1` => gate blocks (treated by callers as CONTINUE / block-stop).
+
+Behavior:
+
+1. **Knob first (exact-as-today when off).** If `LOKI_EVIDENCE_GATE` (default 1)
+   is `0`, `return 0` immediately -- before any file read or write -- so behavior
+   is byte-for-byte today's behavior.
+
+   ```
+   [ "${LOKI_EVIDENCE_GATE:-1}" = "0" ] && return 0
+   ```
+
+2. **Evidence check (a) -- nonzero diff vs run-start SHA (committed UNION working tree).**
+   - Resolve base: `_LOKI_RUN_START_SHA`, else `cat .loki/state/start-sha`.
+   - If no git repo (`git rev-parse --is-inside-work-tree` fails) => **inconclusive
+     => pass-through** (cannot prove fabrication).
+   - **Do NOT count committed-only.** Loki's per-iteration auto-commit is NOT
+     guaranteed -- run.sh itself guards for this ("Also include unstaged changes
+     (in case auto-commit didn't run)", run.sh:9392). A dirty working tree full
+     of real edits is legitimate work, not fabrication; committed-only would
+     false-block it. Count the UNION of four sources, block only when ALL are
+     empty:
+       - committed since baseline: `git diff --name-only <base> HEAD`
+         (when base is empty/invalid, fall back to `git diff --name-only HEAD`,
+         mirroring proof-generator.py's own shallow/first-commit fallback),
+       - unstaged: `git diff --name-only HEAD`,
+       - staged: `git diff --cached --name-only`,
+       - untracked new files: `git ls-files --others --exclude-standard`. A
+         greenfield first run creates brand-new files that are not yet committed,
+         staged, or visible to `git diff HEAD`; without this fourth source the
+         union would be empty and the gate would false-block legitimate new work.
+         `--exclude-standard` respects .gitignore so build artifacts and
+         node_modules do not count as evidence.
+   - The union EXCLUDES any path under `.loki/` (Loki's own runtime state). The
+     gate's own inputs live there (`.loki/quality/test-results.json` is always
+     present at gate time) and several `.loki/*` files are not gitignored, so
+     counting them would make the gate toothless: the union would never be empty.
+     Loki's runtime state is not project work / completion evidence.
+   - If the union of changed paths is empty => **DIFF EVIDENCE FAILS** (nothing
+     shipped anywhere). This strictly reduces false-blocks and cannot let
+     fabrication through: if nothing was built, all four sources are empty.
+
+3. **Evidence check (b) -- tests green.**
+   - Read `.loki/quality/test-results.json`. Missing or unparseable =>
+     **inconclusive => pass-through** for the test dimension (mirrors checklist
+     gate's "no file = no gate").
+   - `runner == "none"` => **no suite exists => pass-through** for the test
+     dimension (the no-suite case is explicitly legitimate).
+   - `runner != "none"` AND `pass == false` => **TEST EVIDENCE FAILS**
+     (a runner ran and was red).
+   - `runner != "none"` AND `pass == true` => test evidence GREEN.
+
+4. **Block decision (truth table, Section 5).** The gate `return 1` (blocks) iff:
+   - DIFF EVIDENCE FAILS (empty diff vs run-start, where git+base were
+     available), OR
+   - TEST EVIDENCE FAILS (a runner actually ran and was red).
+   Otherwise `return 0`.
+
+5. **On block:** write `$COUNCIL_STATE_DIR/evidence-block.json` (atomic
+   temp+mv, mirroring gate-block.json at ~858-885) with the reason(s), then
+   `return 1`. Schema (Section 6).
+
+6. **On pass:** if `$COUNCIL_STATE_DIR/evidence-block.json` exists, `rm -f` it
+   (mirrors checklist gate cleanup at ~890-892), then `return 0`. Stale block
+   reports must not linger and mislead the dashboard.
+
+Implementation note: like `council_checklist_gate`, do the JSON parse in an
+inline `python3 -c` with the file paths passed via env (`_TR_FILE`,
+`_START_SHA`) -- never string-interpolated into the script -- matching the
+existing safe-parse convention.
+
+### 4-design.3 -- Insertion point A: `council_evaluate`
+
+In `council_evaluate`, immediately AFTER the checklist gate block
+(completion-council.sh:1522-1525) and BEFORE the threshold/aggregate computation
+(~1527):
+
+```
+# Phase 2.5 (v7.19.1): evidence hard gate -- block completion unless there is
+# real evidence that files changed AND tests are green.
+if ! council_evidence_gate; then
+    log_info "[Council] Completion blocked by evidence hard gate"
+    return 1  # CONTINUE - cannot complete without real evidence
+fi
+```
+
+This makes it a hard pre-vote gate, sequenced exactly like the checklist gate:
+checklist gate -> evidence gate -> votes -> DA. Members never vote when the
+evidence gate blocks, so no LLM cost is spent rubber-stamping a fabricated done.
+
+### 4-design.4 -- Insertion point B: force-review path (parity)
+
+The dashboard force-review path (run.sh:12762-12784) is a second approval path
+that writes `COMPLETED` (run.sh:12773) and already gates on
+`council_checklist_gate` (run.sh:12766). Add the evidence gate alongside it so
+the two approval paths are symmetric:
+
+```
+if type council_checklist_gate &>/dev/null && ! council_checklist_gate; then
+    log_info "Council force-review: blocked by checklist hard gate"
+elif type council_evidence_gate &>/dev/null && ! council_evidence_gate; then
+    log_info "Council force-review: blocked by evidence hard gate"
+elif type council_vote &>/dev/null && council_vote; then
+    ... existing approval (writes COMPLETED) ...
+```
+
+Without insertion B, a user could click "force review" on the dashboard to
+bypass the evidence gate entirely.
+
+---
+
+## 5. What it blocks / what it must NOT falsely block (truth table)
+
+| Scenario | Diff (start..HEAD) | test-results.json | Gate | Rationale |
+|---|---|---|---|---|
+| Legit completion: real changes + green tests | nonzero | runner=X, pass=true | PASS | the happy path |
+| Greenfield first run: only untracked new files (no commit/stage yet) | nonzero (untracked) | any non-red | PASS | new files are real work; counted via `git ls-files --others --exclude-standard` |
+| Fabricated "done", nothing built (not even untracked) | empty | any | **BLOCK** | nothing shipped anywhere |
+| Real changes but tests red | nonzero | runner=X, pass=false | **BLOCK** | a runner ran and failed |
+| Docs-only change, no test suite | nonzero (docs files) | runner=none, pass=true | PASS | nonzero diff; no suite to fail |
+| Project with no test suite, real code | nonzero | runner=none, pass=true | PASS | code shipped; tests not expected |
+| No git repo | inconclusive | any non-red | PASS | cannot prove fabrication |
+| Empty/missing run-start SHA (new repo, zero commits) | inconclusive | any non-red | PASS | never had a baseline |
+| test-results.json missing/unparseable | nonzero | inconclusive | PASS | mirror "no file = no gate" |
+| `LOKI_EVIDENCE_GATE=0` | n/a | n/a | PASS (no read/write) | exactly today's behavior |
+
+The only two BLOCK rows are positive fabrication evidence: empty diff, or a
+runner that actually ran and was red. Everything inconclusive passes through.
+
+---
+
+## 6. evidence-block.json schema (mirror gate-block.json)
+
+Written to `$COUNCIL_STATE_DIR/evidence-block.json` (`<loki_dir>/council/`),
+atomic temp+mv, so the dashboard and handoff can surface *why* a run did not
+complete:
+
+```json
+{
+    "status": "blocked",
+    "blocked": true,
+    "blocked_at": "2026-06-07T00:00:00Z",
+    "iteration": 12,
+    "reason": "no_evidence_of_completion",
+    "checks": {
+        "diff": {"ok": false, "base_sha": "abc123", "files_changed": 0, "sources": "committed|unstaged|staged union empty"},
+        "tests": {"ok": true, "runner": "pytest", "pass": true}
+    },
+    "failures": ["empty git diff vs run-start SHA (nothing shipped)"]
+}
+```
+
+`reason` is one of `empty_diff`, `tests_red`, or `empty_diff_and_tests_red`.
+`failures` is a short human-readable list (cap 5, like gate-block). On gate pass
+the file is removed.
+
+---
+
+## 7. Dual-route (Bun/TS) parity
+
+**No Bun change needed.** The live runtime is the bash council (run.sh sources
+completion-council.sh and calls council_should_stop). `loki-ts` council.ts is an
+unwired port slice. State this in the CHANGELOG NOT-tested section so a future
+TS port author knows to mirror `council_evidence_gate` when the TS council is
+made live. Adding a TS stub now would be dead code with no runtime to exercise
+it.
+
+---
+
+## 8. Tests
+
+New shell test `tests/test-evidence-gate.sh`, following the source-extraction
+pattern of `tests/test-pytest-gate-timeout.sh` (awk-extract the function from
+completion-council.sh into a minimal harness with stubbed `log_*`,
+`COUNCIL_STATE_DIR`, and `ITERATION_COUNT`) OR an end-to-end fixture that sets up
+a throwaway git repo + `.loki/quality/test-results.json` and calls the sourced
+function directly. Cases:
+
+1. **Empty diff -> blocked.** Repo with run-start SHA == HEAD (no commits since),
+   test-results green => `council_evidence_gate` returns 1; `evidence-block.json`
+   written with `reason: empty_diff`.
+2. **Real diff + green tests -> allowed.** Commit a change after start-sha,
+   `runner=pytest,pass=true` => returns 0; no `evidence-block.json` (and a
+   pre-existing one is removed).
+3. **Real diff + red tests -> blocked.** `runner=pytest,pass=false` => returns 1;
+   `reason: tests_red`.
+4. **No-test project -> not falsely blocked.** Real diff,
+   `runner=none,pass=true` => returns 0.
+5. **No git repo -> not falsely blocked.** Run in a non-git dir => returns 0.
+6. **Knob off -> behaves as before.** `LOKI_EVIDENCE_GATE=0` with an empty diff =>
+   returns 0 and writes NO file.
+7. **Stale block cleanup.** Pre-create `evidence-block.json`, then call with
+   passing evidence => file removed, returns 0.
+8. **Repeat-run baseline recapture.** Simulate a completed prior run (stale
+   `.loki/state/start-sha` pointing at an old SHA), invoke `run_autonomous`
+   with `ITERATION_COUNT == 0`, commit nothing new => start-sha is recaptured at
+   current HEAD and the empty-diff path blocks (proves the gate is not toothless
+   on run 2+). With `ITERATION_COUNT > 0` (resume), the baseline is preserved.
+
+Register in `tests/run-all-tests.sh`. Skip gracefully (exit 0 with SKIP) when
+`git` or `python3` is unavailable, matching existing test conventions.
+
+---
+
+## 9. CHANGELOG entry (honest) + NOT-tested
+
+Under `## [7.19.1] - <date>`:
+
+```
+### Added
+- Verified completion / evidence hard gate (default-on, opt out with
+  `LOKI_EVIDENCE_GATE=0`). The completion council now refuses to approve STOP
+  unless there is real on-disk evidence that the run actually shipped: a nonzero
+  git diff between the run-start SHA (newly captured to `.loki/state/start-sha`)
+  and HEAD, AND a green test signal from `.loki/quality/test-results.json` where
+  a test suite exists. Cloned from the existing `council_checklist_gate` pattern
+  and slotted into `council_evaluate` right after the checklist gate, plus the
+  dashboard force-review approval path for parity. On block it writes
+  `.loki/council/evidence-block.json` (mirroring gate-block.json) so the
+  dashboard/handoff can surface why. Attacks the "agent claims done when nothing
+  shipped" trust-killer. Blocks only on positive fabrication evidence (empty
+  diff, or a runner that actually ran and was red); every inconclusive case (no
+  git repo, no baseline, missing/unparseable test results, no test suite,
+  docs-only changes) passes through so a legitimate completion is never falsely
+  stopped.
+
+### Honest limits / NOT tested
+- This gate proves "something changed and tests are green," NOT PRD-semantic
+  correctness. Semantic judgment remains with the council votes + Devil's
+  Advocate.
+- The force-stop safety valves in `council_should_stop` (stagnation, repeated
+  done-signals) are deliberately NOT gated: they are resource-protection exits
+  that do NOT write the `COMPLETED` marker, so they cannot launder a fabricated
+  "done" as an approved completion.
+- Bun/TS council (`loki-ts`) is an unwired port slice; the live runtime is bash.
+  No TS change shipped. A future TS port must mirror `council_evidence_gate`.
+- Not exercised on Windows; relies on POSIX `git`/`python3`.
+- Not exercised against shallow clones beyond the `git diff HEAD` fallback path.
+```
+
+---
+
+## 10. Risks
+
+| Risk | Likelihood | Impact | Mitigation |
+|---|---|---|---|
+| False block stops a legit run | Med | High | Block only on positive fabrication evidence; all inconclusive => pass; opt-out `LOKI_EVIDENCE_GATE=0`; evidence-block.json explains why so user can act fast |
+| Run-start SHA never captured (no git / zero-commit repo) | Med | Med | Empty/missing baseline => inconclusive => pass-through (never block) |
+| Run-start SHA reset on resume/pause | Med | High (would zero the diff window) | Capture once; only set `.loki/state/start-sha` if not already present |
+| test-results.json stale (PHASE_UNIT_TESTS off, or gate skipped) | Med | Med | Stale/missing => inconclusive => pass; gate runs before council in the same iteration so normally fresh; note freshness dependency |
+| Cannot detect "tests were expected" reliably | Med | Med | Use `runner` field: `none` = no suite (pass), non-`none` = a runner ran (its `pass` bool is authoritative). Do NOT infer test expectation from checklist results.json |
+| Force-review path bypasses gate | High (without fix) | High | Insertion point B adds evidence gate to run.sh:12762-12784 alongside checklist gate |
+| Interaction with checklist gate | Low | Low | Sequenced strictly after it; independent `return 1` semantics; each writes its own block file |
+| Interaction with Devil's Advocate | Low | Low | Gate runs pre-vote; DA only runs on unanimous COMPLETE, which the gate can prevent from being reached. DA's own skeptical test/diff checks remain as a second layer |
+| Diff against unreachable base (shallow) | Low | Low | Fall back to `git diff --numstat HEAD` (mirrors proof-generator.py); if that also fails => inconclusive => pass |
+| Auto-commit makes `git diff HEAD` empty | High | High (would false-block) | Diff = UNION of `base..HEAD` + unstaged + staged; block only when all empty. Run-start baseline (not HEAD working tree) is what makes committed changes count post-auto-commit |
+| Stale baseline on repeat runs (gate no-ops on run 2+) | High (without fix) | High (defeats feature) | Recapture start-sha when `ITERATION_COUNT == 0` (fresh run); keep only on genuine resume (`ITERATION_COUNT > 0`) |
+
+---
+
+## Critical files for implementation
+
+- /Users/lokesh/git/loki-mode/autonomy/completion-council.sh  (clone council_checklist_gate -> council_evidence_gate; insertion A in council_evaluate)
+- /Users/lokesh/git/loki-mode/autonomy/run.sh  (run-start SHA capture in run_autonomous; insertion B in force-review path)
+- /Users/lokesh/git/loki-mode/tests/test-evidence-gate.sh  (new test, pattern from test-pytest-gate-timeout.sh)
+- /Users/lokesh/git/loki-mode/CHANGELOG.md  (honest entry + NOT-tested)
+- /Users/lokesh/git/loki-mode/tests/run-all-tests.sh  (register new test)

package/loki-ts/dist/loki.js

@@ -1,5 +1,5 @@
 // @bun
-var f8=Object.defineProperty;var u8=($)=>$;function c8($,Q){this[$]=u8.bind(null,Q)}var g=($,Q)=>{for(var K in Q)f8($,K,{get:Q[K],enumerable:!0,configurable:!0,set:c8.bind(Q,K)})};var k=($,Q)=>()=>($&&(Q=$($=0)),Q);var X1=import.meta.require;var F$={};g(F$,{lokiDir:()=>P,homeLokiDir:()=>o1,findRepoRootForVersion:()=>d1,REPO_ROOT:()=>f});import{resolve as n,dirname as l1}from"path";import{fileURLToPath as p8}from"url";import{existsSync as L1}from"fs";import{homedir as l8}from"os";function d8(){let $=j$;for(let Q=0;Q<6;Q++){if(L1(n($,"VERSION"))&&L1(n($,"autonomy/run.sh")))return $;let K=l1($);if(K===$)break;$=K}return n(j$,"..","..","..")}function d1($){let Q=$;for(let K=0;K<6;K++){if(L1(n(Q,"VERSION"))&&L1(n(Q,"autonomy/run.sh")))return Q;let Z=l1(Q);if(Z===Q)break;Q=Z}return n($,"..","..","..")}function P(){return process.env.LOKI_DIR??n(process.cwd(),".loki")}function o1(){return n(l8(),".loki")}var j$,f;var y=k(()=>{j$=l1(p8(import.meta.url));f=d8()});import{readFileSync as o8}from"fs";import{resolve as n8,dirname as a8}from"path";import{fileURLToPath as s8}from"url";function k1(){if($1!==null)return $1;let $="7.18.3";if(typeof $==="string"&&$.length>0)return $1=$,$1;try{let Q=a8(s8(import.meta.url)),K=d1(Q);$1=o8(n8(K,"VERSION"),"utf-8").trim()}catch{$1="unknown"}return $1}var $1=null;var n1=k(()=>{y()});var E$={};g(E$,{runOrThrow:()=>t8,run:()=>j,commandVersion:()=>i8,commandExists:()=>v,ShellError:()=>a1});async function j($,Q={}){let K=Bun.spawn({cmd:[...$],stdout:"pipe",stderr:"pipe",env:Q.env?{...process.env,...Q.env}:process.env,cwd:Q.cwd}),Z,z;if(Q.timeoutMs&&Q.timeoutMs>0)Z=setTimeout(()=>{try{K.kill("SIGTERM")}catch{}z=setTimeout(()=>{try{K.kill("SIGKILL")}catch{}},2000)},Q.timeoutMs);try{let[H,X,q]=await Promise.all([new Response(K.stdout).text(),new Response(K.stderr).text(),K.exited]);return{stdout:H,stderr:X,exitCode:q}}finally{if(Z)clearTimeout(Z);if(z)clearTimeout(z)}}async function t8($,Q={}){let K=await j($,Q);if(K.exitCode!==0)throw new a1(`command failed (${K.exitCode}): ${$.join(" ")}`,K.exitCode,K.stdout,K.stderr);return K}async function v($){let Q=r8($),K=await j(["sh","-c",`command -v ${Q}`],{timeoutMs:5000});if(K.exitCode===0)return K.stdout.trim()||null;return null}function r8($){if(!/^[A-Za-z0-9._/-]+$/.test($))throw Error(`refused to shell-escape suspect token: ${$}`);return $}async function i8($,Q="--version"){if(!await v($))return null;let Z=await j([$,Q],{timeoutMs:5000});if(Z.exitCode!==0)return null;return((Z.stdout||Z.stderr).split(/\r?\n/)[0]?.trim()??"")||null}var a1;var d=k(()=>{a1=class a1 extends Error{message;exitCode;stdout;stderr;constructor($,Q,K,Z){super($);this.message=$;this.exitCode=Q;this.stdout=K;this.stderr=Z;this.name="ShellError"}}});function a($){return e8?"":$}var e8,T,N,w,ZK,_,R,h,J;var c=k(()=>{e8=(process.env.NO_COLOR??"").length>0;T=a("\x1B[0;31m"),N=a("\x1B[0;32m"),w=a("\x1B[1;33m"),ZK=a("\x1B[0;34m"),_=a("\x1B[0;36m"),R=a("\x1B[1m"),h=a("\x1B[2m"),J=a("\x1B[0m")});import{existsSync as U7}from"fs";async function Q1(){if(B1!==void 0)return B1;let $="/opt/homebrew/bin/python3.12";if(U7($))return B1=$,$;let Q=await v("python3.12");if(Q)return B1=Q,Q;let K=await v("python3");return B1=K,K}async function K1($,Q={}){let K=await Q1();if(!K)return{stdout:"",stderr:"python3 not found",exitCode:127};return j([K,"-c",$],Q)}var B1;var H1=k(()=>{d()});var d$={};g(d$,{runStatus:()=>N7});import{existsSync as b,readFileSync as q1,readdirSync as v$,statSync as f$}from"fs";import{resolve as D,basename as P7}from"path";import{homedir as L7}from"os";async function j7(){if(await v("jq"))return!0;return process.stdout.write(`${T}Error: jq is required but not installed.${J}
+var f8=Object.defineProperty;var u8=($)=>$;function c8($,Q){this[$]=u8.bind(null,Q)}var g=($,Q)=>{for(var K in Q)f8($,K,{get:Q[K],enumerable:!0,configurable:!0,set:c8.bind(Q,K)})};var k=($,Q)=>()=>($&&(Q=$($=0)),Q);var X1=import.meta.require;var F$={};g(F$,{lokiDir:()=>P,homeLokiDir:()=>o1,findRepoRootForVersion:()=>d1,REPO_ROOT:()=>f});import{resolve as n,dirname as l1}from"path";import{fileURLToPath as p8}from"url";import{existsSync as L1}from"fs";import{homedir as l8}from"os";function d8(){let $=j$;for(let Q=0;Q<6;Q++){if(L1(n($,"VERSION"))&&L1(n($,"autonomy/run.sh")))return $;let K=l1($);if(K===$)break;$=K}return n(j$,"..","..","..")}function d1($){let Q=$;for(let K=0;K<6;K++){if(L1(n(Q,"VERSION"))&&L1(n(Q,"autonomy/run.sh")))return Q;let Z=l1(Q);if(Z===Q)break;Q=Z}return n($,"..","..","..")}function P(){return process.env.LOKI_DIR??n(process.cwd(),".loki")}function o1(){return n(l8(),".loki")}var j$,f;var y=k(()=>{j$=l1(p8(import.meta.url));f=d8()});import{readFileSync as o8}from"fs";import{resolve as n8,dirname as a8}from"path";import{fileURLToPath as s8}from"url";function k1(){if($1!==null)return $1;let $="7.19.1";if(typeof $==="string"&&$.length>0)return $1=$,$1;try{let Q=a8(s8(import.meta.url)),K=d1(Q);$1=o8(n8(K,"VERSION"),"utf-8").trim()}catch{$1="unknown"}return $1}var $1=null;var n1=k(()=>{y()});var E$={};g(E$,{runOrThrow:()=>t8,run:()=>j,commandVersion:()=>i8,commandExists:()=>v,ShellError:()=>a1});async function j($,Q={}){let K=Bun.spawn({cmd:[...$],stdout:"pipe",stderr:"pipe",env:Q.env?{...process.env,...Q.env}:process.env,cwd:Q.cwd}),Z,z;if(Q.timeoutMs&&Q.timeoutMs>0)Z=setTimeout(()=>{try{K.kill("SIGTERM")}catch{}z=setTimeout(()=>{try{K.kill("SIGKILL")}catch{}},2000)},Q.timeoutMs);try{let[H,X,q]=await Promise.all([new Response(K.stdout).text(),new Response(K.stderr).text(),K.exited]);return{stdout:H,stderr:X,exitCode:q}}finally{if(Z)clearTimeout(Z);if(z)clearTimeout(z)}}async function t8($,Q={}){let K=await j($,Q);if(K.exitCode!==0)throw new a1(`command failed (${K.exitCode}): ${$.join(" ")}`,K.exitCode,K.stdout,K.stderr);return K}async function v($){let Q=r8($),K=await j(["sh","-c",`command -v ${Q}`],{timeoutMs:5000});if(K.exitCode===0)return K.stdout.trim()||null;return null}function r8($){if(!/^[A-Za-z0-9._/-]+$/.test($))throw Error(`refused to shell-escape suspect token: ${$}`);return $}async function i8($,Q="--version"){if(!await v($))return null;let Z=await j([$,Q],{timeoutMs:5000});if(Z.exitCode!==0)return null;return((Z.stdout||Z.stderr).split(/\r?\n/)[0]?.trim()??"")||null}var a1;var d=k(()=>{a1=class a1 extends Error{message;exitCode;stdout;stderr;constructor($,Q,K,Z){super($);this.message=$;this.exitCode=Q;this.stdout=K;this.stderr=Z;this.name="ShellError"}}});function a($){return e8?"":$}var e8,T,N,w,ZK,_,R,h,J;var c=k(()=>{e8=(process.env.NO_COLOR??"").length>0;T=a("\x1B[0;31m"),N=a("\x1B[0;32m"),w=a("\x1B[1;33m"),ZK=a("\x1B[0;34m"),_=a("\x1B[0;36m"),R=a("\x1B[1m"),h=a("\x1B[2m"),J=a("\x1B[0m")});import{existsSync as U7}from"fs";async function Q1(){if(B1!==void 0)return B1;let $="/opt/homebrew/bin/python3.12";if(U7($))return B1=$,$;let Q=await v("python3.12");if(Q)return B1=Q,Q;let K=await v("python3");return B1=K,K}async function K1($,Q={}){let K=await Q1();if(!K)return{stdout:"",stderr:"python3 not found",exitCode:127};return j([K,"-c",$],Q)}var B1;var H1=k(()=>{d()});var d$={};g(d$,{runStatus:()=>N7});import{existsSync as b,readFileSync as q1,readdirSync as v$,statSync as f$}from"fs";import{resolve as D,basename as P7}from"path";import{homedir as L7}from"os";async function j7(){if(await v("jq"))return!0;return process.stdout.write(`${T}Error: jq is required but not installed.${J}
 `),process.stdout.write(`Install with:
 `),process.stdout.write(`  brew install jq    (macOS)
 `),process.stdout.write(`  apt install jq     (Debian/Ubuntu)
@@ -787,4 +787,4 @@ Set LOKI_LEGACY_BASH=1 to force the bash CLI for every command.
 `),2}default:return process.stderr.write(`Unknown command: ${Q}
 `),process.stderr.write(v8),2}}g$();process.on("SIGINT",()=>process.exit(130));process.on("SIGTERM",()=>process.exit(143));var p3=await c3(Bun.argv.slice(2));process.exit(p3);
 
-//# debugId=DCAB18FFEADE84B364756E2164756E21
+//# debugId=C5A2181B4CB7536864756E2164756E21

package/mcp/__init__.py

@@ -57,4 +57,4 @@ try:
 except ImportError:
     __all__ = ['mcp']
 
-__version__ = '7.18.3'
+__version__ = '7.19.1'

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "loki-mode",
-  "version": "7.18.3",
+  "version": "7.19.1",
   "description": "Loki Mode by Autonomi. Autonomous spec-to-product system: takes a PRD, GitHub issue, OpenAPI/JSON/YAML, or one-line brief to a deployed app via the RARV-C closure loop with 11 quality gates. Provider-agnostic (Claude Code, OpenAI Codex, Cline, Aider).",
   "keywords": [
     "agent",

package/skills/quality-gates.md

@@ -110,6 +110,36 @@ LOKI_HANDOFF_MD=1          # write a structured handoff doc to
 Optional: `LOKI_AUTO_LEARNINGS_EPISODE=1` also writes the learning into
 the Python episodic memory layer via `memory.engine.save_episode`.
 
+## Verified-completion evidence gate (v7.19.1, default-on)
+
+The completion council will not accept a "done" claim without evidence. Before
+completion is honored (on BOTH the council path AND the default
+completion-promise route), `council_evidence_gate` requires:
+
+- a nonzero git diff vs the run-start SHA (something was actually shipped), AND
+- green tests (`.loki/quality/test-results.json` shows the runner passed).
+
+The diff is the union of committed, staged, unstaged, and untracked changes
+(`--exclude-standard`, so gitignored artifacts do not count), with `.loki/`
+runtime state excluded. Inconclusive cases (no git repo, no baseline, no
+test-results file, `runner=none`) pass through and never false-block a
+legitimate first run.
+
+```bash
+LOKI_EVIDENCE_GATE=0       # opt out: completion is honored without the
+                           # evidence check (byte-identical to pre-v7.19.1).
+                           # Default is on (1).
+```
+
+When the gate blocks, it prints the reason and this opt-out to the terminal,
+writes `.loki/council/evidence-block.json`, and surfaces in the dashboard
+(`/api/council/gate` -> `evidence`; the Quality Gates panel shows a banner). A
+persistent block keeps iterating only up to `MAX_ITERATIONS`, then stops
+cleanly; it cannot hang. Honest limit: this proves something-changed-and-tests-
+pass, not PRD-semantic correctness (the council vote is the semantic check).
+The common false-block is a project that was ALREADY red before the run; the
+one-step opt-out is the escape hatch.
+
 **Override-judge knobs (v7.5.4+):**
 
 ```bash