lightman-agent 1.0.5 → 1.0.7

package/scripts/install-rpi.sh

@@ -1,117 +1,117 @@
-#!/usr/bin/env bash
-# LIGHTMAN Agent — Raspberry Pi Installer
-# Extends the standard Linux install with RPi-specific optimizations.
-# Run as root: sudo bash install-rpi.sh
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-INSTALL_DIR="/opt/lightman/agent"
-
-# --- Pre-checks ---
-if [[ $EUID -ne 0 ]]; then
-  echo "Error: This script must be run as root (use sudo)."
-  exit 1
-fi
-
-if [[ ! -f /proc/device-tree/model ]]; then
-  echo "Error: This does not appear to be a Raspberry Pi."
-  exit 1
-fi
-
-MODEL=$(tr -d '\0' < /proc/device-tree/model)
-echo "=== LIGHTMAN Agent — Raspberry Pi Installer ==="
-echo "  Detected: ${MODEL}"
-echo ""
-
-# --- Run standard Linux install first ---
-echo "[RPi 1/6] Running standard Linux install..."
-bash "$SCRIPT_DIR/install-linux.sh"
-echo ""
-
-# --- GPU memory split ---
-echo "[RPi 2/6] Configuring GPU memory..."
-CONFIG_FILE="/boot/config.txt"
-if [[ -f /boot/firmware/config.txt ]]; then
-  CONFIG_FILE="/boot/firmware/config.txt"
-fi
-
-if ! grep -q "^gpu_mem=" "$CONFIG_FILE" 2>/dev/null; then
-  echo "gpu_mem=128" >> "$CONFIG_FILE"
-  echo "  Set gpu_mem=128 in ${CONFIG_FILE}"
-else
-  echo "  gpu_mem already configured in ${CONFIG_FILE}"
-fi
-
-# --- Disable screensaver / screen blanking ---
-echo "[RPi 3/6] Disabling screen blanking..."
-# For console blanking
-if ! grep -q "consoleblank=0" /boot/cmdline.txt 2>/dev/null; then
-  if [[ -f /boot/cmdline.txt ]]; then
-    sed -i 's/$/ consoleblank=0/' /boot/cmdline.txt
-    echo "  Added consoleblank=0 to /boot/cmdline.txt"
-  fi
-fi
-
-# For X11 screensaver
-LIGHTDM_CONF="/etc/lightdm/lightdm.conf"
-if [[ -f "$LIGHTDM_CONF" ]]; then
-  if ! grep -q "xserver-command.*-s 0" "$LIGHTDM_CONF" 2>/dev/null; then
-    sed -i '/^\[Seat:\*\]/a xserver-command=X -s 0 -dpms' "$LIGHTDM_CONF" 2>/dev/null || true
-    echo "  Disabled X11 screensaver via lightdm"
-  fi
-fi
-
-# --- Hardware watchdog ---
-echo "[RPi 4/6] Configuring hardware watchdog..."
-if ! grep -q "^dtparam=watchdog=on" "$CONFIG_FILE" 2>/dev/null; then
-  echo "dtparam=watchdog=on" >> "$CONFIG_FILE"
-  echo "  Enabled BCM2835 watchdog in ${CONFIG_FILE}"
-fi
-
-# Load watchdog module
-if ! lsmod | grep -q bcm2835_wdt 2>/dev/null; then
-  modprobe bcm2835_wdt 2>/dev/null || true
-fi
-
-if ! grep -q "bcm2835_wdt" /etc/modules 2>/dev/null; then
-  echo "bcm2835_wdt" >> /etc/modules
-fi
-
-# Set watchdog device permissions for lightman user
-if [[ -e /dev/watchdog ]]; then
-  chown root:lightman /dev/watchdog
-  chmod 660 /dev/watchdog
-  echo "  Set /dev/watchdog permissions for lightman group"
-fi
-
-# --- tmpfs for logs (reduce SD card wear) ---
-echo "[RPi 5/6] Configuring tmpfs for logs..."
-FSTAB_ENTRY="tmpfs /var/log/lightman tmpfs defaults,noatime,nosuid,nodev,noexec,mode=0750,size=50M,uid=lightman,gid=lightman 0 0"
-if ! grep -q "/var/log/lightman" /etc/fstab 2>/dev/null; then
-  echo "$FSTAB_ENTRY" >> /etc/fstab
-  mount -a 2>/dev/null || true
-  echo "  Added tmpfs mount for /var/log/lightman"
-fi
-
-# --- Sudoers for agent power commands ---
-echo "[RPi 6/6] Configuring sudoers..."
-SUDOERS_FILE="/etc/sudoers.d/lightman-agent"
-cat > "$SUDOERS_FILE" << 'SUDOERS'
-# LIGHTMAN Agent - allow power commands without password
-lightman ALL=(ALL) NOPASSWD: /sbin/shutdown
-lightman ALL=(ALL) NOPASSWD: /sbin/reboot
-lightman ALL=(ALL) NOPASSWD: /usr/bin/vcgencmd
-SUDOERS
-chmod 440 "$SUDOERS_FILE"
-echo "  Installed sudoers for lightman agent"
-
-echo ""
-echo "=== Raspberry Pi Setup Complete ==="
-echo ""
-echo "  IMPORTANT: Reboot required for:"
-echo "    - GPU memory allocation"
-echo "    - Hardware watchdog"
-echo "    - Screen blanking changes"
-echo ""
-echo "  Reboot now:  sudo reboot"
-echo ""
+#!/usr/bin/env bash
+# LIGHTMAN Agent — Raspberry Pi Installer
+# Extends the standard Linux install with RPi-specific optimizations.
+# Run as root: sudo bash install-rpi.sh
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+INSTALL_DIR="/opt/lightman/agent"
+
+# --- Pre-checks ---
+if [[ $EUID -ne 0 ]]; then
+  echo "Error: This script must be run as root (use sudo)."
+  exit 1
+fi
+
+if [[ ! -f /proc/device-tree/model ]]; then
+  echo "Error: This does not appear to be a Raspberry Pi."
+  exit 1
+fi
+
+MODEL=$(tr -d '\0' < /proc/device-tree/model)
+echo "=== LIGHTMAN Agent — Raspberry Pi Installer ==="
+echo "  Detected: ${MODEL}"
+echo ""
+
+# --- Run standard Linux install first ---
+echo "[RPi 1/6] Running standard Linux install..."
+bash "$SCRIPT_DIR/install-linux.sh"
+echo ""
+
+# --- GPU memory split ---
+echo "[RPi 2/6] Configuring GPU memory..."
+CONFIG_FILE="/boot/config.txt"
+if [[ -f /boot/firmware/config.txt ]]; then
+  CONFIG_FILE="/boot/firmware/config.txt"
+fi
+
+if ! grep -q "^gpu_mem=" "$CONFIG_FILE" 2>/dev/null; then
+  echo "gpu_mem=128" >> "$CONFIG_FILE"
+  echo "  Set gpu_mem=128 in ${CONFIG_FILE}"
+else
+  echo "  gpu_mem already configured in ${CONFIG_FILE}"
+fi
+
+# --- Disable screensaver / screen blanking ---
+echo "[RPi 3/6] Disabling screen blanking..."
+# For console blanking
+if ! grep -q "consoleblank=0" /boot/cmdline.txt 2>/dev/null; then
+  if [[ -f /boot/cmdline.txt ]]; then
+    sed -i 's/$/ consoleblank=0/' /boot/cmdline.txt
+    echo "  Added consoleblank=0 to /boot/cmdline.txt"
+  fi
+fi
+
+# For X11 screensaver
+LIGHTDM_CONF="/etc/lightdm/lightdm.conf"
+if [[ -f "$LIGHTDM_CONF" ]]; then
+  if ! grep -q "xserver-command.*-s 0" "$LIGHTDM_CONF" 2>/dev/null; then
+    sed -i '/^\[Seat:\*\]/a xserver-command=X -s 0 -dpms' "$LIGHTDM_CONF" 2>/dev/null || true
+    echo "  Disabled X11 screensaver via lightdm"
+  fi
+fi
+
+# --- Hardware watchdog ---
+echo "[RPi 4/6] Configuring hardware watchdog..."
+if ! grep -q "^dtparam=watchdog=on" "$CONFIG_FILE" 2>/dev/null; then
+  echo "dtparam=watchdog=on" >> "$CONFIG_FILE"
+  echo "  Enabled BCM2835 watchdog in ${CONFIG_FILE}"
+fi
+
+# Load watchdog module
+if ! lsmod | grep -q bcm2835_wdt 2>/dev/null; then
+  modprobe bcm2835_wdt 2>/dev/null || true
+fi
+
+if ! grep -q "bcm2835_wdt" /etc/modules 2>/dev/null; then
+  echo "bcm2835_wdt" >> /etc/modules
+fi
+
+# Set watchdog device permissions for lightman user
+if [[ -e /dev/watchdog ]]; then
+  chown root:lightman /dev/watchdog
+  chmod 660 /dev/watchdog
+  echo "  Set /dev/watchdog permissions for lightman group"
+fi
+
+# --- tmpfs for logs (reduce SD card wear) ---
+echo "[RPi 5/6] Configuring tmpfs for logs..."
+FSTAB_ENTRY="tmpfs /var/log/lightman tmpfs defaults,noatime,nosuid,nodev,noexec,mode=0750,size=50M,uid=lightman,gid=lightman 0 0"
+if ! grep -q "/var/log/lightman" /etc/fstab 2>/dev/null; then
+  echo "$FSTAB_ENTRY" >> /etc/fstab
+  mount -a 2>/dev/null || true
+  echo "  Added tmpfs mount for /var/log/lightman"
+fi
+
+# --- Sudoers for agent power commands ---
+echo "[RPi 6/6] Configuring sudoers..."
+SUDOERS_FILE="/etc/sudoers.d/lightman-agent"
+cat > "$SUDOERS_FILE" << 'SUDOERS'
+# LIGHTMAN Agent - allow power commands without password
+lightman ALL=(ALL) NOPASSWD: /sbin/shutdown
+lightman ALL=(ALL) NOPASSWD: /sbin/reboot
+lightman ALL=(ALL) NOPASSWD: /usr/bin/vcgencmd
+SUDOERS
+chmod 440 "$SUDOERS_FILE"
+echo "  Installed sudoers for lightman agent"
+
+echo ""
+echo "=== Raspberry Pi Setup Complete ==="
+echo ""
+echo "  IMPORTANT: Reboot required for:"
+echo "    - GPU memory allocation"
+echo "    - Hardware watchdog"
+echo "    - Screen blanking changes"
+echo ""
+echo "  Reboot now:  sudo reboot"
+echo ""