kxco-post-quantum 1.1.11 → 1.1.12

package/CHANGELOG.md

@@ -1,210 +1,210 @@
-# Changelog
-
-## 1.1.6 — 2026-05-24
-
-Maintenance release. No breaking changes.
-
-
-
-## 1.1.5 — 2026-05-24
-
-Maintenance release. No breaking changes.
-
-
-
-## 1.1.4 — 2026-05-24
-
-Maintenance release. No breaking changes.
-
-
-
-## 1.1.3 — 2026-05-23
-
-Maintenance release. No breaking changes.
-
-
-All notable changes to this project will be documented in this file.
-
-The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.1.0/),
-and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
-
-## [Unreleased]
-
-## [1.1.2] — 2026-05-22
-
-Documentation correction. No code changes; no behaviour changes; no
-cryptographic surface changes vs `1.1.1`.
-
-### Fixed
-- **AUDIT.md** §1 previously cited a 2024 Cure53 audit of
-  `@noble/post-quantum`. That citation was incorrect — Cure53's 2023
-  NDS-01 audit covered `@noble/ciphers`, `@noble/curves`, and
-  `@noble/hashes` only; the post-quantum package was not in scope. As of
-  2026-05-22, upstream `@noble/post-quantum` has only been self-audited
-  by its maintainer (v0.6.1, April 2026). AUDIT.md §1 has been rewritten
-  to reflect the actual upstream audit posture. A correction notice is
-  included at the top of the file. Reviewers who relied on the prior
-  citation should re-read §1 of AUDIT.md.
-- **CHANGELOG.md** 1.0.0 entry similarly stated "audited by Cure53,
-  2024" alongside the upstream pin. That sentence has been corrected
-  in-place in this release; the substance of the 1.0.0 release is
-  otherwise unchanged.
-
-### Why this is a patch, not an advisory
-The misstatement was in documentation only. No code path, signature,
-key-derivation routine, or wire format depends on the cited audit. The
-fix is a documentation rewrite; affected installs upgrade by pulling
-1.1.2. If your due-diligence pack referenced AUDIT.md from 1.0.1
-through 1.1.1, please refresh against 1.1.2.
-
-## [1.1.1] — 2026-05-21
-
-Operational hardening release. No source-code changes; this is the first
-release published via **npm Trusted Publishing** rather than a long-lived
-`NPM_TOKEN`.
-
-### Changed
-- `.github/workflows/publish.yml` now publishes via npm Trusted Publishing
-  (OIDC). The `NODE_AUTH_TOKEN` / `NPM_OTP` env vars are removed; the
-  workflow's `id-token: write` permission is the entire credential.
-  Registered at https://www.npmjs.com/package/kxco-post-quantum/access
-  binding `org=JackKXCO`, `repo=kxco-post-quantum`, `workflow=publish.yml`.
-- Repo-level `NPM_TOKEN` and `NPM_OTP` secrets removed — no long-lived
-  credentials remain in the publishing path.
-
-### Why this matters
-- Every release tarball is now signed by GitHub Actions OIDC against the
-  exact commit being published, with no human-held secret in the loop.
-- No more burning recovery codes per release. The publish workflow now
-  runs hands-free on every `v*` tag push.
-
-## [1.1.0] — 2026-05-21
-
-Same API. Same byte-for-byte outputs (all 29 pinned vectors still match).
-The package now runs in **browsers** as well as Node.
-
-### Added
-- Isomorphic runtime — every module works identically in modern browsers
-  (Chromium, Firefox, Safari) and Node, served from CDNs like esm.sh
-  with zero polyfill burden
-- `test/browser-smoke.test.js` runs the public API with `globalThis.Buffer`
-  removed, asserts plain `Uint8Array` outputs and a clean hybrid-signing
-  round trip — proves browser compatibility in CI
-
-### Changed
-- HKDF-SHA-512 now sourced from `@noble/hashes/hkdf` (was `node:crypto`)
-- HMAC-SHA-256 now sourced from `@noble/hashes/hmac` (was `node:crypto`)
-- SHA-256 for kid fingerprints now sourced from `@noble/hashes/sha256`
-  (was `node:crypto`)
-- Constant-time comparisons are portable byte loops (replaces
-  `node:crypto.timingSafeEqual`) — identical security property,
-  runs in browsers
-- Functions return `Buffer` on Node (when `globalThis.Buffer` is defined)
-  and plain `Uint8Array` in browsers. **Backwards compatible** for Node
-  callers; `Buffer extends Uint8Array` so any code accepting `Uint8Array`
-  already works.
-- `engines.node` bumped to `>=20.19` to match the underlying
-  `@noble/hashes@2` requirement (Node 18 is past EOL)
-
-### Dependencies
-- Added `@noble/hashes ^2.2.0` (peer of `@noble/post-quantum`)
-- `@noble/post-quantum ^0.2.1` unchanged
-
-### Verification
-- 9 node tests pass
-- 6 browser-smoke tests pass
-- 29 pinned vectors still match — no cryptographic surface changes,
-  bit-for-bit identical to 1.0.3 in Node
-
-## [1.0.3] — 2026-05-21
-
-First release ships with SLSA Level 2 provenance attestation tied to a
-public GitHub Actions workflow run. No cryptographic surface changes
-vs `1.0.2` — every diff is metadata, types, CI, and hygiene.
-
-### Added
-- SLSA Level 2 provenance on every published release via GitHub Actions OIDC
-  (`publishConfig.provenance: true`)
-- `.github/workflows/publish.yml` triggered by `v*` tags — runs tests then
-  `npm publish --provenance --access public`
-- `.github/workflows/ci.yml` matrix over Node 18 / 20 / 22 on every push and PR
-- Hand-written TypeScript declarations (`.d.ts`) for all six modules; wired
-  into `exports[*].types` so TypeScript consumers get full typings without
-  any build step
-- `.github/dependabot.yml` — weekly npm + github-actions ecosystem checks
-- `sideEffects: false` for tree-shaking
-- `funding` field in `package.json`
-- Top-level `"types"` field in `package.json` pointing at `./src/index.d.ts`
-
-### Changed
-- `package.json` `files` allowlist tightened to `["src", "README.md", "LICENSE",
-  "SECURITY.md", "CHANGELOG.md"]` — locks down what ships to npm
-- `package.json` `exports` now declares per-subpath `types` + `import` keys
-- `SECURITY.md` rewritten in the standard short-form template with explicit
-  in-scope / out-of-scope split delegating primitive bugs upstream to
-  `@noble/post-quantum`
-- All third-party actions in workflows pinned by 40-char commit SHA, never
-  floating tags
-- README badge row trimmed to four (`npm`, `license`, `Socket`, `production-live`)
-  and a 60-second live-verify quickstart added under the title
-
-### Security
-- No cryptographic code changed in this release — every change is metadata,
-  types, CI, and documentation. Production behaviour is bit-for-bit identical
-  to `1.0.2`.
-
-## [1.0.2] — 2026-05-21
-
-### Changed
-- Repository URL on the npm package metadata now points to
-  `github.com/JackKXCO/kxco-post-quantum`. No code change.
-
-## [1.0.1] — 2026-05-21
-
-### Added
-- `AUDIT.md` — self-attested audit posture with roadmap (external audit
-  Q3 2026, public bug bounty Q4 2026, FIPS 140-3 CMVP application 2027)
-- `test/vectors.json` — 29 deterministic test vectors pinning every primitive
-  output bit-for-bit
-- `test/run-vectors.js` — runner anyone can use to verify reproducibility
-- `npm test` runs both the functional tests and vector verification
-- `npm run test:vectors` for vector check only
-
-### Changed
-- `SECURITY.md` sharpened with explicit threat model and pinned upstream
-  `@noble/post-quantum@0.2.1` integrity hash
-- `README.md` "Used in production at" section with file refs to chain.kxco.ai
-
-No API changes from `1.0.0`.
-
-## [1.0.0] — 2026-05-21
-
-First stable release. Committed public API surface:
-
-- `mlDsa.keypairFromMaster(master, info—)`, `mlDsa.sign`, `mlDsa.verify`
-- `mlKem.keypairFromMaster(master, info—)`, `mlKem.encapsulate`, `mlKem.decapsulate`
-- `deriveSeed(master, info, length)`
-- `fingerprint(publicKey)`, `kidEquals(a, b)`
-- `webhook.envelope`, `webhook.hmacHex`, `webhook.verifyHmac`,
-  `webhook.pqSign`, `webhook.verifyPq`, `webhook.signDelivery`,
-  `webhook.verifyDelivery`
-
-Verified at release: 9/9 functional tests + 29/29 vector checks pass.
-
-Underlying primitives via `@noble/post-quantum@^0.2.1`. See `AUDIT.md` for
-upstream audit posture (no third-party audit of the PQ package; self-audited
-by maintainer at v0.6.1, April 2026). ESM-only. Node.js 18+.
-
-## [0.1.0] — 2026-05-21
-
-Initial pre-release.
-
-[Unreleased]: https://github.com/JackKXCO/kxco-post-quantum/compare/v1.1.2...HEAD
-[1.1.2]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.1.1...v1.1.2
-[1.1.1]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.1.0...v1.1.1
-[1.1.0]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.3...v1.1.0
-[1.0.3]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.2...v1.0.3
-[1.0.2]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.1...v1.0.2
-[1.0.1]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.0...v1.0.1
-[1.0.0]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v0.1.0...v1.0.0
+# Changelog
+
+## 1.1.6 — 2026-05-24
+
+Maintenance release. No breaking changes.
+
+
+
+## 1.1.5 — 2026-05-24
+
+Maintenance release. No breaking changes.
+
+
+
+## 1.1.4 — 2026-05-24
+
+Maintenance release. No breaking changes.
+
+
+
+## 1.1.3 — 2026-05-23
+
+Maintenance release. No breaking changes.
+
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.1.0/),
+and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+## [Unreleased]
+
+## [1.1.2] — 2026-05-22
+
+Documentation correction. No code changes; no behaviour changes; no
+cryptographic surface changes vs `1.1.1`.
+
+### Fixed
+- **AUDIT.md** §1 previously cited a 2024 Cure53 audit of
+  `@noble/post-quantum`. That citation was incorrect — Cure53's 2023
+  NDS-01 audit covered `@noble/ciphers`, `@noble/curves`, and
+  `@noble/hashes` only; the post-quantum package was not in scope. As of
+  2026-05-22, upstream `@noble/post-quantum` has only been self-audited
+  by its maintainer (v0.6.1, April 2026). AUDIT.md §1 has been rewritten
+  to reflect the actual upstream audit posture. A correction notice is
+  included at the top of the file. Reviewers who relied on the prior
+  citation should re-read §1 of AUDIT.md.
+- **CHANGELOG.md** 1.0.0 entry similarly stated "audited by Cure53,
+  2024" alongside the upstream pin. That sentence has been corrected
+  in-place in this release; the substance of the 1.0.0 release is
+  otherwise unchanged.
+
+### Why this is a patch, not an advisory
+The misstatement was in documentation only. No code path, signature,
+key-derivation routine, or wire format depends on the cited audit. The
+fix is a documentation rewrite; affected installs upgrade by pulling
+1.1.2. If your due-diligence pack referenced AUDIT.md from 1.0.1
+through 1.1.1, please refresh against 1.1.2.
+
+## [1.1.1] — 2026-05-21
+
+Operational hardening release. No source-code changes; this is the first
+release published via **npm Trusted Publishing** rather than a long-lived
+`NPM_TOKEN`.
+
+### Changed
+- `.github/workflows/publish.yml` now publishes via npm Trusted Publishing
+  (OIDC). The `NODE_AUTH_TOKEN` / `NPM_OTP` env vars are removed; the
+  workflow's `id-token: write` permission is the entire credential.
+  Registered at https://www.npmjs.com/package/kxco-post-quantum/access
+  binding `org=JackKXCO`, `repo=kxco-post-quantum`, `workflow=publish.yml`.
+- Repo-level `NPM_TOKEN` and `NPM_OTP` secrets removed — no long-lived
+  credentials remain in the publishing path.
+
+### Why this matters
+- Every release tarball is now signed by GitHub Actions OIDC against the
+  exact commit being published, with no human-held secret in the loop.
+- No more burning recovery codes per release. The publish workflow now
+  runs hands-free on every `v*` tag push.
+
+## [1.1.0] — 2026-05-21
+
+Same API. Same byte-for-byte outputs (all 29 pinned vectors still match).
+The package now runs in **browsers** as well as Node.
+
+### Added
+- Isomorphic runtime — every module works identically in modern browsers
+  (Chromium, Firefox, Safari) and Node, served from CDNs like esm.sh
+  with zero polyfill burden
+- `test/browser-smoke.test.js` runs the public API with `globalThis.Buffer`
+  removed, asserts plain `Uint8Array` outputs and a clean hybrid-signing
+  round trip — proves browser compatibility in CI
+
+### Changed
+- HKDF-SHA-512 now sourced from `@noble/hashes/hkdf` (was `node:crypto`)
+- HMAC-SHA-256 now sourced from `@noble/hashes/hmac` (was `node:crypto`)
+- SHA-256 for kid fingerprints now sourced from `@noble/hashes/sha256`
+  (was `node:crypto`)
+- Constant-time comparisons are portable byte loops (replaces
+  `node:crypto.timingSafeEqual`) — identical security property,
+  runs in browsers
+- Functions return `Buffer` on Node (when `globalThis.Buffer` is defined)
+  and plain `Uint8Array` in browsers. **Backwards compatible** for Node
+  callers; `Buffer extends Uint8Array` so any code accepting `Uint8Array`
+  already works.
+- `engines.node` bumped to `>=20.19` to match the underlying
+  `@noble/hashes@2` requirement (Node 18 is past EOL)
+
+### Dependencies
+- Added `@noble/hashes ^2.2.0` (peer of `@noble/post-quantum`)
+- `@noble/post-quantum ^0.2.1` unchanged
+
+### Verification
+- 9 node tests pass
+- 6 browser-smoke tests pass
+- 29 pinned vectors still match — no cryptographic surface changes,
+  bit-for-bit identical to 1.0.3 in Node
+
+## [1.0.3] — 2026-05-21
+
+First release ships with SLSA Level 2 provenance attestation tied to a
+public GitHub Actions workflow run. No cryptographic surface changes
+vs `1.0.2` — every diff is metadata, types, CI, and hygiene.
+
+### Added
+- SLSA Level 2 provenance on every published release via GitHub Actions OIDC
+  (`publishConfig.provenance: true`)
+- `.github/workflows/publish.yml` triggered by `v*` tags — runs tests then
+  `npm publish --provenance --access public`
+- `.github/workflows/ci.yml` matrix over Node 18 / 20 / 22 on every push and PR
+- Hand-written TypeScript declarations (`.d.ts`) for all six modules; wired
+  into `exports[*].types` so TypeScript consumers get full typings without
+  any build step
+- `.github/dependabot.yml` — weekly npm + github-actions ecosystem checks
+- `sideEffects: false` for tree-shaking
+- `funding` field in `package.json`
+- Top-level `"types"` field in `package.json` pointing at `./src/index.d.ts`
+
+### Changed
+- `package.json` `files` allowlist tightened to `["src", "README.md", "LICENSE",
+  "SECURITY.md", "CHANGELOG.md"]` — locks down what ships to npm
+- `package.json` `exports` now declares per-subpath `types` + `import` keys
+- `SECURITY.md` rewritten in the standard short-form template with explicit
+  in-scope / out-of-scope split delegating primitive bugs upstream to
+  `@noble/post-quantum`
+- All third-party actions in workflows pinned by 40-char commit SHA, never
+  floating tags
+- README badge row trimmed to four (`npm`, `license`, `Socket`, `production-live`)
+  and a 60-second live-verify quickstart added under the title
+
+### Security
+- No cryptographic code changed in this release — every change is metadata,
+  types, CI, and documentation. Production behaviour is bit-for-bit identical
+  to `1.0.2`.
+
+## [1.0.2] — 2026-05-21
+
+### Changed
+- Repository URL on the npm package metadata now points to
+  `github.com/JackKXCO/kxco-post-quantum`. No code change.
+
+## [1.0.1] — 2026-05-21
+
+### Added
+- `AUDIT.md` — self-attested audit posture with roadmap (external audit
+  Q3 2026, public bug bounty Q4 2026, FIPS 140-3 CMVP application 2027)
+- `test/vectors.json` — 29 deterministic test vectors pinning every primitive
+  output bit-for-bit
+- `test/run-vectors.js` — runner anyone can use to verify reproducibility
+- `npm test` runs both the functional tests and vector verification
+- `npm run test:vectors` for vector check only
+
+### Changed
+- `SECURITY.md` sharpened with explicit threat model and pinned upstream
+  `@noble/post-quantum@0.2.1` integrity hash
+- `README.md` "Used in production at" section with file refs to chain.kxco.ai
+
+No API changes from `1.0.0`.
+
+## [1.0.0] — 2026-05-21
+
+First stable release. Committed public API surface:
+
+- `mlDsa.keypairFromMaster(master, info—)`, `mlDsa.sign`, `mlDsa.verify`
+- `mlKem.keypairFromMaster(master, info—)`, `mlKem.encapsulate`, `mlKem.decapsulate`
+- `deriveSeed(master, info, length)`
+- `fingerprint(publicKey)`, `kidEquals(a, b)`
+- `webhook.envelope`, `webhook.hmacHex`, `webhook.verifyHmac`,
+  `webhook.pqSign`, `webhook.verifyPq`, `webhook.signDelivery`,
+  `webhook.verifyDelivery`
+
+Verified at release: 9/9 functional tests + 29/29 vector checks pass.
+
+Underlying primitives via `@noble/post-quantum@^0.2.1`. See `AUDIT.md` for
+upstream audit posture (no third-party audit of the PQ package; self-audited
+by maintainer at v0.6.1, April 2026). ESM-only. Node.js 18+.
+
+## [0.1.0] — 2026-05-21
+
+Initial pre-release.
+
+[Unreleased]: https://github.com/JackKXCO/kxco-post-quantum/compare/v1.1.2...HEAD
+[1.1.2]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.1.1...v1.1.2
+[1.1.1]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.1.0...v1.1.1
+[1.1.0]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.3...v1.1.0
+[1.0.3]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.2...v1.0.3
+[1.0.2]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.1...v1.0.2
+[1.0.1]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v1.0.0...v1.0.1
+[1.0.0]:      https://github.com/JackKXCO/kxco-post-quantum/compare/v0.1.0...v1.0.0
 [0.1.0]:      https://github.com/JackKXCO/kxco-post-quantum/releases/tag/v0.1.0