koneck 2.25.60 → 2.25.62

package/dist/logo.d.ts

@@ -11,16 +11,17 @@
  * anyone forcing ASCII has said what they want.
  */
 /**
- * Half-block art, 34 columns by 9 rows.
+ * Half-block art, 34 columns by 6 rows.
  *
- * The size is not arbitrary: the mark is 1.51 times wider than it is tall, and half-blocks make
- * each sub-cell roughly square, so 34 columns over 22 half-rows reproduces that. The first attempt
- * was 22 by 7 and the arms of the two K's merged into a single blob with a diamond hole — at that
- * width a diagonal two cells thick has nowhere to go.
+ * Cropped to the stems' cap height, which is the fix for a complaint made three times: the arms
+ * in the source mark rise above the stems, so the top and bottom rows held nothing but two arm
+ * tips floating clear of everything else. Symmetry was not the problem — both K's were provably
+ * mirrored — and testing for symmetry is why it took three tries to see. Rasterising the art and
+ * counting connected components is the test that finds this: the mark must be exactly two shapes,
+ * with no cell of either one detached from its stem.
  *
- * The tip rows are trimmed. Where each arm tapers to a single cell the render is a detached speck
- * rather than a point — read on a real terminal as dirt above and below the mark — and the taper
- * is already carried by the row beneath it.
+ * The lower half is the upper half mirrored rather than what the conversion produced, which was
+ * a pixel out of true and read as lopsided. A K is symmetric about its own middle.
  */
 export declare const LOGO_BLOCKS: readonly string[];
 /**
@@ -30,9 +31,8 @@ export declare const LOGO_BLOCKS: readonly string[];
  * drift from the mark the moment either is edited.
  *
  * One character for every inked cell, whole or half. Using " and _ for the halves was closer to a
- * half-block in principle and wrong in practice: an underscore reads as a direction, so the
- * fragment at the top of the right-hand K had a dash pointing away from its arm and looked like a
- * stray mark rather than part of the letter. Reported as "the extra -## on the right K".
+ * half-block in principle and wrong in practice: an underscore reads as a direction, so the arm
+ * tips carried a dash pointing away from the letter.
  */
 export declare const LOGO_ASCII: readonly string[];
 /** How wide the logo needs the terminal to be before it is worth drawing. */

package/dist/logo.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"logo.d.ts","sourceRoot":"","sources":["../src/logo.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;GAWG;AAEH;;;;;;;;;;;GAWG;AACH,eAAO,MAAM,WAAW,EAAE,SAAS,MAAM,EAUxC,CAAC;AAEF;;;;;;;;;;GAUG;AACH,eAAO,MAAM,UAAU,EAAE,SAAS,MAAM,EAUvC,CAAC;AAEF,6EAA6E;AAC7E,eAAO,MAAM,gBAAgB,KAAK,CAAC;AAEnC;;;;;GAKG;AACH,wBAAgB,OAAO,CAAC,OAAO,EAAE,MAAM,EAAE,KAAK,UAAQ,GAAG,SAAS,MAAM,EAAE,CAGzE"}
+{"version":3,"file":"logo.d.ts","sourceRoot":"","sources":["../src/logo.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;GAWG;AAEH;;;;;;;;;;;;GAYG;AACH,eAAO,MAAM,WAAW,EAAE,SAAS,MAAM,EAOxC,CAAC;AAEF;;;;;;;;;GASG;AACH,eAAO,MAAM,UAAU,EAAE,SAAS,MAAM,EAOvC,CAAC;AAEF,6EAA6E;AAC7E,eAAO,MAAM,gBAAgB,KAAK,CAAC;AAEnC;;;;;GAKG;AACH,wBAAgB,OAAO,CAAC,OAAO,EAAE,MAAM,EAAE,KAAK,UAAQ,GAAG,SAAS,MAAM,EAAE,CAGzE"}

package/dist/logo.js

@@ -11,27 +11,25 @@
  * anyone forcing ASCII has said what they want.
  */
 /**
- * Half-block art, 34 columns by 9 rows.
+ * Half-block art, 34 columns by 6 rows.
  *
- * The size is not arbitrary: the mark is 1.51 times wider than it is tall, and half-blocks make
- * each sub-cell roughly square, so 34 columns over 22 half-rows reproduces that. The first attempt
- * was 22 by 7 and the arms of the two K's merged into a single blob with a diamond hole — at that
- * width a diagonal two cells thick has nowhere to go.
+ * Cropped to the stems' cap height, which is the fix for a complaint made three times: the arms
+ * in the source mark rise above the stems, so the top and bottom rows held nothing but two arm
+ * tips floating clear of everything else. Symmetry was not the problem — both K's were provably
+ * mirrored — and testing for symmetry is why it took three tries to see. Rasterising the art and
+ * counting connected components is the test that finds this: the mark must be exactly two shapes,
+ * with no cell of either one detached from its stem.
  *
- * The tip rows are trimmed. Where each arm tapers to a single cell the render is a detached speck
- * rather than a point — read on a real terminal as dirt above and below the mark — and the taper
- * is already carried by the row beneath it.
+ * The lower half is the upper half mirrored rather than what the conversion produced, which was
+ * a pixel out of true and read as lopsided. A K is symmetric about its own middle.
  */
 export const LOGO_BLOCKS = [
-    "             ▄██  ██▄",
-    "▄▄▄▄▄      ▄████  ████▄      ▄▄▄▄▄",
-    "█████    ▄████▀    ▀████▄    █████",
-    "█████ ▄▄████▀        ▀████▄▄ █████",
-    "███████████            ███████████",
-    "██████▀▀████▄        ▄████▀▀██████",
-    "█████    ▀█████    █████▀    █████",
-    "████▀      ▀████  ████▀      ▀████",
-    "             ▀██  ██▀",
+    "█████     ▄████▀  ▀████▄     █████",
+    "█████   ▄████▀      ▀████▄   █████",
+    "█████▄█████▀          ▀█████▄█████",
+    "█████▀█████▄          ▄█████▀█████",
+    "█████   ▀████▄      ▄████▀   █████",
+    "█████     ▀████▄  ▄████▀     █████",
 ];
 /**
  * The same shape in characters every terminal has.
@@ -40,20 +38,16 @@ export const LOGO_BLOCKS = [
  * drift from the mark the moment either is edited.
  *
  * One character for every inked cell, whole or half. Using " and _ for the halves was closer to a
- * half-block in principle and wrong in practice: an underscore reads as a direction, so the
- * fragment at the top of the right-hand K had a dash pointing away from its arm and looked like a
- * stray mark rather than part of the letter. Reported as "the extra -## on the right K".
+ * half-block in principle and wrong in practice: an underscore reads as a direction, so the arm
+ * tips carried a dash pointing away from the letter.
  */
 export const LOGO_ASCII = [
-    "             ###  ###",
-    "#####      #####  #####      #####",
-    "#####    ######    ######    #####",
-    "##### #######        ####### #####",
-    "###########            ###########",
-    "#############        #############",
-    "#####    ######    ######    #####",
-    "#####      #####  #####      #####",
-    "             ###  ###",
+    "#####     ######  ######     #####",
+    "#####   ######      ######   #####",
+    "############          ############",
+    "############          ############",
+    "#####   ######      ######   #####",
+    "#####     ######  ######     #####",
 ];
 /** How wide the logo needs the terminal to be before it is worth drawing. */
 export const LOGO_MIN_COLUMNS = 38;

package/dist/logo.js.map

@@ -1 +1 @@
-{"version":3,"file":"logo.js","sourceRoot":"","sources":["../src/logo.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;GAWG;AAEH;;;;;;;;;;;GAWG;AACH,MAAM,CAAC,MAAM,WAAW,GAAsB;IAC5C,uBAAuB;IACvB,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,uBAAuB;CACxB,CAAC;AAEF;;;;;;;;;;GAUG;AACH,MAAM,CAAC,MAAM,UAAU,GAAsB;IAC3C,uBAAuB;IACvB,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,uBAAuB;CACxB,CAAC;AAEF,6EAA6E;AAC7E,MAAM,CAAC,MAAM,gBAAgB,GAAG,EAAE,CAAC;AAEnC;;;;;GAKG;AACH,MAAM,UAAU,OAAO,CAAC,OAAe,EAAE,KAAK,GAAG,KAAK;IACpD,IAAI,OAAO,GAAG,gBAAgB;QAAE,OAAO,EAAE,CAAC;IAC1C,OAAO,KAAK,CAAC,CAAC,CAAC,UAAU,CAAC,CAAC,CAAC,WAAW,CAAC;AAC1C,CAAC"}
+{"version":3,"file":"logo.js","sourceRoot":"","sources":["../src/logo.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;GAWG;AAEH;;;;;;;;;;;;GAYG;AACH,MAAM,CAAC,MAAM,WAAW,GAAsB;IAC5C,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;CACrC,CAAC;AAEF;;;;;;;;;GASG;AACH,MAAM,CAAC,MAAM,UAAU,GAAsB;IAC3C,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;IACpC,oCAAoC;CACrC,CAAC;AAEF,6EAA6E;AAC7E,MAAM,CAAC,MAAM,gBAAgB,GAAG,EAAE,CAAC;AAEnC;;;;;GAKG;AACH,MAAM,UAAU,OAAO,CAAC,OAAe,EAAE,KAAK,GAAG,KAAK;IACpD,IAAI,OAAO,GAAG,gBAAgB;QAAE,OAAO,EAAE,CAAC;IAC1C,OAAO,KAAK,CAAC,CAAC,CAAC,UAAU,CAAC,CAAC,CAAC,WAAW,CAAC;AAC1C,CAAC"}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "koneck",
-  "version": "2.25.60",
+  "version": "2.25.62",
   "description": "Kinetically Orchestrated Neural Execution Engine for Code",
   "type": "module",
   "bin": {