koffi 2.3.6 → 2.3.8

package/vendor/brotli/c/tools/brotli.md

@@ -1,107 +0,0 @@
-brotli(1) -- brotli, unbrotli - compress or decompress files
-================================================================
-
-SYNOPSIS
---------
-
-`brotli` [*OPTION|FILE*]...
-
-`unbrotli` is equivalent to `brotli --decompress`
-
-DESCRIPTION
------------
-`brotli` is a generic-purpose lossless compression algorithm that compresses
-data using a combination of a modern variant of the **LZ77** algorithm, Huffman
-coding and 2-nd order context modeling, with a compression ratio comparable to
-the best currently available general-purpose compression methods. It is similar
-in speed with deflate but offers more dense compression.
-
-`brotli` command line syntax similar to `gzip (1)` and `zstd (1)`.
-Unlike `gzip (1)`, source files are preserved by default. It is possible to
-remove them after processing by using the `--rm` _option_.
-
-Arguments that look like "`--name`" or "`--name=value`" are _options_. Every
-_option_ has a short form "`-x`" or "`-x value`". Multiple short form _options_
-could be coalesced:
-
-* "`--decompress --stdout --suffix=.b`" works the same as
-* "`-d -s -S .b`" and
-* "`-dsS .b`"
-
-`brotli` has 3 operation modes:
-
-* default mode is compression;
-* `--decompress` option activates decompression mode;
-* `--test` option switches to integrity test mode; this option is equivalent to
-  "`--decompress --stdout`" except that the decompressed data is discarded
-  instead of being written to standard output.
-
-Every non-option argument is a _file_ entry. If no _files_ are given or _file_
-is "`-`", `brotli` reads from standard input. All arguments after "`--`" are
-_file_ entries.
-
-Unless `--stdout` or `--output` is specified, _files_ are written to a new file
-whose name is derived from the source _file_ name:
-
-* when compressing, a suffix is appended to the source filename to
-  get the target filename
-* when decompressing, a suffix is removed from the source filename to
-  get the target filename
-
-Default suffix is `.br`, but it could be specified with `--suffix` option.
-
-Conflicting or duplicate _options_ are not allowed.
-
-OPTIONS
--------
-
-* `-#`:
-    compression level (0-9); bigger values cause denser, but slower compression
-* `-c`, `--stdout`:
-    write on standard output
-* `-d`, `--decompress`:
-    decompress mode
-* `-f`, `--force`:
-    force output file overwrite
-* `-h`, `--help`:
-    display this help and exit
-* `-j`, `--rm`:
-    remove source file(s); `gzip (1)`-like behaviour
-* `-k`, `--keep`:
-    keep source file(s); `zstd (1)`-like behaviour
-* `-n`, `--no-copy-stat`:
-    do not copy source file(s) attributes
-* `-o FILE`, `--output=FILE`
-    output file; valid only if there is a single input entry
-* `-q NUM`, `--quality=NUM`:
-    compression level (0-11); bigger values cause denser, but slower compression
-* `-t`, `--test`:
-    test file integrity mode
-* `-v`, `--verbose`:
-    increase output verbosity
-* `-w NUM`, `--lgwin=NUM`:
-    set LZ77 window size (0, 10-24) (default: 22); window size is
-    `(2**NUM - 16)`; 0 lets compressor decide over the optimal value; bigger
-    windows size improve density; decoder might require up to window size
-    memory to operate
-* `-S SUF`, `--suffix=SUF`:
-    output file suffix (default: `.br`)
-* `-V`, `--version`:
-    display version and exit
-* `-Z`, `--best`:
-    use best compression level (default); same as "`-q 11`"
-
-SEE ALSO
---------
-
-`brotli` file format is defined in
-[RFC 7932](https://www.ietf.org/rfc/rfc7932.txt).
-
-`brotli` is open-sourced under the
-[MIT License](https://opensource.org/licenses/MIT).
-
-Mailing list: https://groups.google.com/forum/#!forum/brotli
-
-BUGS
-----
-Report bugs at: https://github.com/google/brotli/issues

package/vendor/brotli/compiler_config_setting.bzl

@@ -1,28 +0,0 @@
-# Copyright 2018 Google Inc. All Rights Reserved.
-#
-# Distributed under MIT license.
-#  See file LICENSE for detail or copy at https://opensource.org/licenses/MIT
-
-"""Creates config_setting that allows selecting based on 'compiler' value."""
-
-def create_msvc_config():
-  # The "do_not_use_tools_cpp_compiler_present" attribute exists to
-  # distinguish between older versions of Bazel that do not support
-  # "@bazel_tools//tools/cpp:compiler" flag_value, and newer ones that do.
-  # In the future, the only way to select on the compiler will be through
-  # flag_values{"@bazel_tools//tools/cpp:compiler"} and the else branch can
-  # be removed.
-  if hasattr(cc_common, "do_not_use_tools_cpp_compiler_present"):
-    native.config_setting(
-      name = "msvc",
-      flag_values = {
-          "@bazel_tools//tools/cpp:compiler": "msvc-cl",
-      },
-      visibility = ["//visibility:public"],
-    )
-  else:
-    native.config_setting(
-      name = "msvc",
-      values = {"compiler": "msvc-cl"},
-      visibility = ["//visibility:public"],
-    )

package/vendor/brotli/configure

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-echo "Use Autotools, Bazel, CMake or Premake5 to generate projects / build files."
-echo "  Bazel: http://www.bazel.build/"
-echo "  CMake: https://cmake.org/"
-echo "  Premake5: https://premake.github.io/"
-echo "To generate Autotools 'configure' file run './bootstrap'."
-echo "Run './configure-cmake' for Autotools-like CMake configuration."
-echo "Or simply run 'make' to build and test command line tool."

package/vendor/brotli/configure-cmake

@@ -1,318 +0,0 @@
-#!/usr/bin/env bash
-
-# Autotools-style (./configure) wrapper for CMake
-# <https://github.com/nemequ/configure-cmake>
-#
-#   *** IMPORTANT ***
-#
-#   You must include the GNUInstallDirs module (which comes with
-#   CMake) in your project.  Just put "include (GNUInstallDirs)" in
-#   you CMakeLists.txt and you should be good.
-#
-# This script was originally written for Squash
-# <https://quixdb.github.io/squash/> by Evan Nemerson
-# <evan@nemerson.com>, but has been spun off into a separate
-# repository.  Please feel free to copy it into your own repository,
-# though I would appreciate it if you would post improvements, bugs,
-# feature requests, etc. to the issue tracker at
-# <https://github.com/nemequ/configure-cmake/issues>.
-#
-# To the extent possible under law, the author(s) hereby waive all
-# copyright and related or neighboring rights to this work.  For
-# details, see <https://creativecommons.org/publicdomain/zero/1.0/>
-
-TOP_SRCDIR="$(dirname $0)"
-
-if [ "${CMAKE_CMD}" = "" ]; then
-    CMAKE_CMD="cmake"
-fi
-
-BUILD_TYPE="Debug"
-PREFIX=/usr/local
-LIBDIR=
-CMAKE_ARGS=
-
-if [ -e "${TOP_SRCDIR}/scripts/.configure-custom.sh" ]; then
-    . "${TOP_SRCDIR}/scripts/.configure-custom.sh"
-fi
-
-quote() {
-    echo "$1" | sed -e "s|'|'\\\\''|g; 1s/^/'/; \$s/\$/'/"
-}
-
-extract_var_string() {
-    VAR_NAME=$1
-    VAR_NAME=$(echo $1 | sed -e 's/[ \t]*$//')
-    if [ "x$2" != "x" ]; then
-        VAR_VALUE=$2
-    else
-        VAR_VALUE=yes
-    fi
-
-    if [ "x$3" != "x" ]; then
-        VAR_UC_NAME=$3
-    else
-        VAR_UC_NAME=$(echo "$1" | tr '[:lower:]' '[:upper:]' | tr -c '[:alnum:]' '_' | sed 's/_$//g')
-    fi
-}
-
-set_config_var() {
-    is_with=n
-    case "$1" in
-        "--enable-"*)
-            name="${1#--enable-}"
-            cfg="${ENABLE_VARS}"
-            ;;
-        "--disable-"*)
-            name="${1#--disable-}";
-            cfg="${DISABLE_VARS}";
-            ;;
-        "--with-"*)
-            # IFS="=" read -ra WITHARGS <<< "${1}"
-            name="${1#--with-}"
-            cfg="${WITH_VARS}"
-            is_with=y
-            ;;
-    esac
-
-    found=n
-    for varstring in $cfg; do
-        extract_var_string $(echo "${varstring}" | tr '|' ' ')
-        if [ "x$VAR_NAME" = "x$name" ]; then
-            found=y
-            break;
-        fi
-    done
-
-    if [ "$found" = "y" ]; then
-        if [ "x$is_with" = "xy" ]; then
-            CMAKE_ARGS="$CMAKE_ARGS -D${VAR_UC_NAME}=$(quote "$2")"
-        else
-            CMAKE_ARGS="$CMAKE_ARGS -D${VAR_UC_NAME}=$(quote "${VAR_VALUE}")"
-        fi
-    else
-        echo "Unknown parameter: ${1}"
-        exit 1
-    fi
-}
-
-prefix_to_offset() {
-    expr $(echo "${1}" | awk '{ print length }') + 1
-}
-
-print_help() {
-    cat <<EOF >&2
-  -h, --help              display this help and exit
-  --disable-debug         disable debugging mode
-  --pass-thru             pass remaining arguments through to CMake
-
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$PREFIX]
-  --bindir=DIR            user executables [PREFIX/bin]
-  --sbindir=DIR           system admin executables [PREFIX/sbin]
-  --libexecdir=DIR        program executables [PREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [PREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/PROJECT_NAME]
-EOF
-
-    first=y
-    for varstring in ${ENABLE_VARS}; do
-        if [ $first = 'y' ]; then
-            echo ""
-            first=n
-        fi
-        extract_var_string $(echo "${varstring}" | tr '|' ' ')
-        var_doc_name="ENABLE_${VAR_UC_NAME}_DOC"
-        eval "docstring=\$$var_doc_name"
-        if [ "x${docstring}" = "x" ]; then
-            printf "  --enable-%-14s enable %s support\n" "${VAR_NAME}" "$(echo -n "${VAR_NAME}" | tr '-' ' ')"
-        else
-            printf "  --enable-%-14s %s\n" "${VAR_NAME}" "$docstring"
-        fi
-    done
-
-    first=y
-    for varstring in ${DISABLE_VARS}; do
-        if [ $first = 'y' ]; then
-            echo ""
-            first=n
-        fi
-        extract_var_string $(echo "${varstring}" | tr '|' ' ')
-        var_doc_name="DISABLE_${VAR_UC_NAME}_DOC"
-        eval "docstring=\$$var_doc_name"
-        if [ "x${docstring}" = "x" ]; then
-            printf "  --disable-%-13s disable %s support\n" "${VAR_NAME}" "$(echo -n "${VAR_NAME}" | tr '-' ' ')"
-        else
-            printf "  --disable-%-13s %s\n" "${VAR_NAME}" "$docstring"
-        fi
-    done
-
-    first=y
-    for varstring in ${WITH_VARS}; do
-        if [ $first = 'y' ]; then
-            echo ""
-            first=n
-        fi
-        extract_var_string $(echo "${varstring}" | tr '|' ' ')
-        var_doc_name="WITH_${VAR_UC_NAME}_DOC"
-        eval "docstring=\$$var_doc_name"
-        paraminfo="${VAR_NAME}=${VAR_VALUE}"
-        if [ "x${docstring}" = "x" ]; then
-            printf "  --with-%-16s enable %s support\n" "$paraminfo" "$(echo -n "${VAR_NAME}" | tr '-' ' ')"
-        else
-            printf "  --with-%-16s %s\n" "$paraminfo" "$docstring"
-        fi
-    done
-
-    exit 0
-}
-
-while [ $# != 0 ]; do
-    case "$1" in
-        "--prefix="*)
-            PREFIX="${1#*=}";;
-        "--prefix")
-            PREFIX="${2}"; shift;;
-        "--bindir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_BINDIR=$(quote "${1#*=}")";;
-        "--bindir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_BINDIR=$(quote "$2")"; shift;;
-        "--sbindir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_SBINDIR=$(quote "${1#*=}")";;
-        "--sbindir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_SBINDIR=$(quote "$2")"; shift;;
-        "--libexecdir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_LIBEXECDIR=$(quote "${1#*=}")";;
-        "--libexecdir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_LIBEXECDIR=$(quote "$2")"; shift;;
-        "--sysconfdir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_SYSCONFDIR=$(quote "${1#*=}")";;
-        "--sysconfdir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_SYSCONFDIR=$(quote "$2")"; shift;;
-        "--sharedstatedir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_SHAREDSTATEDIR=$(quote "${1#*=}")";;
-        "--sharedstatedir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_SHAREDSTATEDIR=$(quote "$2")"; shift;;
-        "--localstatedir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_LOCALSTATEDIR=$(quote "${1#*=}")";;
-        "--localstatedir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_LOCALSTATEDIR=$(quote "$2")"; shift;;
-        "--libdir="*)
-            LIBDIR="${1#*=}";;
-        "--libdir")
-            LIBDIR="${2}"; shift;;
-        "--includedir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_INCLUDEDIR=$(quote "${1#*=}")";;
-        "--includedir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_INCLUDEDIR=$(quote "$2")"; shift;;
-        "--oldincludedir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_OLDINCLUDEDIR=$(quote "${1#*=}")";;
-        "--oldincludedir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_OLDINCLUDEDIR=$(quote "$2")"; shift;;
-        "--datarootdir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_DATAROOTDIR=$(quote "${1#*=}")";;
-        "--datarootdir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_DATAROOTDIR=$(quote "$2")"; shift;;
-        "--datadir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_DATADIR=$(quote "${1#*=}")";;
-        "--datadir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_DATADIR=$(quote "$2")"; shift;;
-        "--infodir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_INFODIR=$(quote "${1#*=}")";;
-        "--infodir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_INFODIR=$(quote "$2")"; shift;;
-        "--localedir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_LOCALEDIR=$(quote "${1#*=}")";;
-        "--localedir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_LOCALEDIR=$(quote "$2")"; shift;;
-        "--mandir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_MANDIR=$(quote "${1#*=}")";;
-        "--mandir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_MANDIR=$(quote "$2")"; shift;;
-        "--docdir="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_DOCDIR=$(quote "${1#*=}")";;
-        "--docdir")
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_INSTALL_DOCDIR=$(quote "$2")"; shift;;
-
-        "CC="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_C_COMPILER=$(quote "${1#*=}")";;
-        "CXX="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_CXX_COMPILER=$(quote "${1#*=}")";;
-        "CFLAGS="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_C_FLAGS=$(quote "${1#*=}")";;
-        "CXXFLAGS="*)
-            CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_CXX_FLAGS=$(quote "${1#*=}")";;
-        "LDFLAGS="*)
-            LDFLAGS="$LDFLAGS ${1#*=}";;
-
-        "--help")
-            print_help;;
-        "-h")
-            print_help;;
-
-        # This flag is the only one which may be a bit surprising to
-        # people.  Autotools always builds with debugging symbols enabled
-        # (AFAIK), but for cmake you have to do -DCMAKE_BUILD_TYPE=Debug.
-        # Unfortunately this can change other things as well, so although
-        # I realize there is no --disable-debug flag I thought it would be
-        # prudent to support one here.
-        "--disable-debug")
-            BUILD_TYPE="Release";;
-
-        "--pass-thru")
-            shift;
-            while [ $# != 0 ]; do
-                CMAKE_ARGS="$CMAKE_ARGS $(quote "${1}")";
-                shift;
-            done;;
-
-        "--enable-"*)
-            set_config_var "$1"
-            ;;
-
-        "--disable-"*)
-            set_config_var "$1"
-            ;;
-
-        "--with-"*)
-            name=$(echo "${1#--with-}" | awk '{split($1,v,"="); print v[1]}')
-            case "${1}" in
-                "--with-${name}="*)
-                    set_config_var "--with-${name}" "${1#--with-${name}=}";;
-                "--with-${name}")
-                    set_config_var "$1" "$2";
-                    shift;;
-            esac
-            ;;
-
-        *)
-            echo "$0: error: unrecognized option: \`$1'" >&2
-            echo "Try \`$0 --help' for more information" >&2
-            exit -1
-    esac;
-    shift
-done
-
-if [ "x${LIBDIR}" = "x" ]; then
-    LIBDIR="${PREFIX}/lib"
-fi
-
-# Unlike CFLAGS/CXXFLAGS/CC/CXX, LDFLAGS isn't handled by CMake, so we
-# need to parse it here.
-if [ "x${LDFLAGS}" != "x" ]; then
-    for varname in EXE MODULE SHARED STATIC; do
-        CMAKE_ARGS="$CMAKE_ARGS -DCMAKE_${varname}_LINKER_FLAGS=$(quote "$LDFLAGS")"
-    done
-fi
-
-eval "${CMAKE_CMD}" "${TOP_SRCDIR}" -DCMAKE_BUILD_TYPE="${BUILD_TYPE}" -DCMAKE_INSTALL_PREFIX="${PREFIX}" -DCMAKE_INSTALL_LIBDIR="${LIBDIR}" ${CMAKE_ARGS}

package/vendor/brotli/configure.ac

@@ -1,14 +0,0 @@
-AC_PREREQ(2.57)
-
-dnl Actual version is substituted by bootstrap
-AC_INIT([brotli], [0.0.0], [https://groups.google.com/forum/#!forum/brotli])
-
-AM_INIT_AUTOMAKE()
-AC_CONFIG_MACRO_DIR([m4])
-
-AC_PROG_CC
-LT_INIT
-
-AC_CONFIG_FILES([Makefile scripts/libbrotlicommon.pc scripts/libbrotlidec.pc scripts/libbrotlienc.pc])
-
-AC_OUTPUT

package/vendor/brotli/docs/brotli.1

@@ -1,132 +0,0 @@
-.TH "BROTLI" "1" "February 2018" "brotli 1.0.0" "User commands"
-.SH "NAME"
-\fBbrotli\fR \- brotli, unbrotli \- compress or decompress files
-.SH SYNOPSIS
-.P
-\fBbrotli\fP [\fIOPTION|FILE\fR]\.\.\.
-.P
-\fBunbrotli\fP is equivalent to \fBbrotli \-\-decompress\fP
-.SH DESCRIPTION
-.P
-\fBbrotli\fP is a generic\-purpose lossless compression algorithm that compresses
-data using a combination of a modern variant of the \fBLZ77\fR algorithm, Huffman
-coding and 2\-nd order context modeling, with a compression ratio comparable to
-the best currently available general\-purpose compression methods\. It is similar
-in speed with deflate but offers more dense compression\.
-.P
-\fBbrotli\fP command line syntax similar to \fBgzip (1)\fP and \fBzstd (1)\fP\|\.
-Unlike \fBgzip (1)\fP, source files are preserved by default\. It is possible to
-remove them after processing by using the \fB\-\-rm\fP \fIoption\fR\|\.
-.P
-Arguments that look like "\fB\-\-name\fP" or "\fB\-\-name=value\fP" are \fIoptions\fR\|\. Every
-\fIoption\fR has a short form "\fB\-x\fP" or "\fB\-x value\fP"\. Multiple short form \fIoptions\fR
-could be coalesced:
-.RS 0
-.IP \(bu 2
-"\fB\-\-decompress \-\-stdout \-\-suffix=\.b\fP" works the same as
-.IP \(bu 2
-"\fB\-d \-s \-S \.b\fP" and
-.IP \(bu 2
-"\fB\-dsS \.b\fP"
-
-.RE
-.P
-\fBbrotli\fP has 3 operation modes:
-.RS 0
-.IP \(bu 2
-default mode is compression;
-.IP \(bu 2
-\fB\-\-decompress\fP option activates decompression mode;
-.IP \(bu 2
-\fB\-\-test\fP option switches to integrity test mode; this option is equivalent to
-"\fB\-\-decompress \-\-stdout\fP" except that the decompressed data is discarded
-instead of being written to standard output\.
-
-.RE
-.P
-Every non\-option argument is a \fIfile\fR entry\. If no \fIfiles\fR are given or \fIfile\fR
-is "\fB\-\fP", \fBbrotli\fP reads from standard input\. All arguments after "\fB\-\-\fP" are
-\fIfile\fR entries\.
-.P
-Unless \fB\-\-stdout\fP or \fB\-\-output\fP is specified, \fIfiles\fR are written to a new file
-whose name is derived from the source \fIfile\fR name:
-.RS 0
-.IP \(bu 2
-when compressing, a suffix is appended to the source filename to
-get the target filename
-.IP \(bu 2
-when decompressing, a suffix is removed from the source filename to
-get the target filename
-
-.RE
-.P
-Default suffix is \fB\|\.br\fP, but it could be specified with \fB\-\-suffix\fP option\.
-.P
-Conflicting or duplicate \fIoptions\fR are not allowed\.
-.SH OPTIONS
-.RS 0
-.IP \(bu 2
-\fB\-#\fP:
-  compression level (0\-9); bigger values cause denser, but slower compression
-.IP \(bu 2
-\fB\-c\fP, \fB\-\-stdout\fP:
-  write on standard output
-.IP \(bu 2
-\fB\-d\fP, \fB\-\-decompress\fP:
-  decompress mode
-.IP \(bu 2
-\fB\-f\fP, \fB\-\-force\fP:
-  force output file overwrite
-.IP \(bu 2
-\fB\-h\fP, \fB\-\-help\fP:
-  display this help and exit
-.IP \(bu 2
-\fB\-j\fP, \fB\-\-rm\fP:
-  remove source file(s); \fBgzip (1)\fP\-like behaviour
-.IP \(bu 2
-\fB\-k\fP, \fB\-\-keep\fP:
-  keep source file(s); \fBzstd (1)\fP\-like behaviour
-.IP \(bu 2
-\fB\-n\fP, \fB\-\-no\-copy\-stat\fP:
-  do not copy source file(s) attributes
-.IP \(bu 2
-\fB\-o FILE\fP, \fB\-\-output=FILE\fP
-  output file; valid only if there is a single input entry
-.IP \(bu 2
-\fB\-q NUM\fP, \fB\-\-quality=NUM\fP:
-  compression level (0\-11); bigger values cause denser, but slower compression
-.IP \(bu 2
-\fB\-t\fP, \fB\-\-test\fP:
-  test file integrity mode
-.IP \(bu 2
-\fB\-v\fP, \fB\-\-verbose\fP:
-  increase output verbosity
-.IP \(bu 2
-\fB\-w NUM\fP, \fB\-\-lgwin=NUM\fP:
-  set LZ77 window size (0, 10\-24) (default: 22); window size is
-  \fB(2**NUM \- 16)\fP; 0 lets compressor decide over the optimal value; bigger
-  windows size improve density; decoder might require up to window size
-  memory to operate
-.IP \(bu 2
-\fB\-S SUF\fP, \fB\-\-suffix=SUF\fP:
-  output file suffix (default: \fB\|\.br\fP)
-.IP \(bu 2
-\fB\-V\fP, \fB\-\-version\fP:
-  display version and exit
-.IP \(bu 2
-\fB\-Z\fP, \fB\-\-best\fP:
-  use best compression level (default); same as "\fB\-q 11\fP"
-
-.RE
-.SH SEE ALSO
-.P
-\fBbrotli\fP file format is defined in
-RFC 7932 \fIhttps://www\.ietf\.org/rfc/rfc7932\.txt\fR\|\.
-.P
-\fBbrotli\fP is open\-sourced under the
-MIT License \fIhttps://opensource\.org/licenses/MIT\fR\|\.
-.P
-Mailing list: https://groups\.google\.com/forum/#!forum/brotli
-.SH BUGS
-.P
-Report bugs at: https://github\.com/google/brotli/issues

package/vendor/brotli/docs/constants.h.3

@@ -1,47 +0,0 @@
-.TH "constants.h" 3 "Wed May 13 2020" "Brotli" \" -*- nroff -*-
-.ad l
-.nh
-.SH NAME
-constants.h \- Common constants used in decoder and encoder API\&.  
-
-.SH SYNOPSIS
-.br
-.PP
-.SS "Macros"
-
-.in +1c
-.ti -1c
-.RI "#define \fBBROTLI_LARGE_MAX_DISTANCE_BITS\fP   62U"
-.br
-.RI "\fIThe theoretical maximum number of distance bits specified for large window brotli, for 64-bit encoders and decoders\&. \fP"
-.ti -1c
-.RI "#define \fBBROTLI_LARGE_MAX_WBITS\fP   30"
-.br
-.RI "\fIThe maximum supported large brotli window bits by the encoder and decoder\&. \fP"
-.ti -1c
-.RI "#define \fBBROTLI_MAX_NPOSTFIX\fP   3"
-.br
-.RI "\fIMaximal number of 'postfix' bits\&. \fP"
-.in -1c
-.SH "Detailed Description"
-.PP 
-Common constants used in decoder and encoder API\&. 
-
-
-.SH "Macro Definition Documentation"
-.PP 
-.SS "#define BROTLI_LARGE_MAX_DISTANCE_BITS   62U"
-
-.PP
-The theoretical maximum number of distance bits specified for large window brotli, for 64-bit encoders and decoders\&. Even when in practice 32-bit encoders and decoders only support up to 30 max distance bits, the value is set to 62 because it affects the large window brotli file format\&. Specifically, it affects the encoding of simple huffman tree for distances, see Specification RFC 7932 chapter 3\&.4\&. 
-.SS "#define BROTLI_LARGE_MAX_WBITS   30"
-
-.PP
-The maximum supported large brotli window bits by the encoder and decoder\&. Large window brotli allows up to 62 bits, however the current encoder and decoder, designed for 32-bit integers, only support up to 30 bits maximum\&. 
-.SS "#define BROTLI_MAX_NPOSTFIX   3"
-
-.PP
-Maximal number of 'postfix' bits\&. Number of 'postfix' bits is stored as 2 bits in meta-block header\&. 
-.SH "Author"
-.PP 
-Generated automatically by Doxygen for Brotli from the source code\&.