jscad-electronics 0.0.223 → 0.0.228

package/dist/index.d.ts

@@ -1,7 +1,8 @@
 import * as react from 'react';
 import { AnyCircuitElement, PcbSmtPad, PcbPlatedHole } from 'circuit-json';
-import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
 import { z } from 'zod';
+import jscad from '@jscad/modeling';
+import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
 
 declare const A01005: ({ color }: {
     color?: string | undefined;
@@ -2023,6 +2024,44 @@ declare const wormGearModelPropsSchema: z.ZodEffects<z.ZodObject<{
 }>;
 type WormGearModelPropsInput = z.input<typeof wormGearModelPropsSchema>;
 
+declare const angleBarModelPropsSchema: z.ZodEffects<z.ZodObject<{
+    width: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    height: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    thickness: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    innerRadius: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    tipRadius: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    width: number;
+    height: number;
+    thickness: number;
+    innerRadius: number;
+    tipRadius: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    thickness: string | number;
+    innerRadius?: string | number | undefined;
+    tipRadius?: string | number | undefined;
+}>, {
+    length: number;
+    width: number;
+    height: number;
+    thickness: number;
+    innerRadius: number;
+    tipRadius: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    thickness: string | number;
+    innerRadius?: string | number | undefined;
+    tipRadius?: string | number | undefined;
+}>;
+type AngleBarModelPropsInput = z.input<typeof angleBarModelPropsSchema>;
+
 declare const ballBearingModelPropsSchema: z.ZodEffects<z.ZodObject<{
     innerDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
     outerDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
@@ -2273,6 +2312,49 @@ declare const cableGrommetModelPropsSchema: z.ZodEffects<z.ZodObject<{
 }>;
 type CableGrommetModelPropsInput = z.input<typeof cableGrommetModelPropsSchema>;
 
+declare const channelBarModelPropsSchema: z.ZodEffects<z.ZodObject<{
+    width: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    height: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    webThickness: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    flangeThickness: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    innerRadius: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    tipRadius: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    width: number;
+    height: number;
+    innerRadius: number;
+    tipRadius: number;
+    flangeThickness: number;
+    webThickness: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    flangeThickness: string | number;
+    webThickness: string | number;
+    innerRadius?: string | number | undefined;
+    tipRadius?: string | number | undefined;
+}>, {
+    length: number;
+    width: number;
+    height: number;
+    innerRadius: number;
+    tipRadius: number;
+    flangeThickness: number;
+    webThickness: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    flangeThickness: string | number;
+    webThickness: string | number;
+    innerRadius?: string | number | undefined;
+    tipRadius?: string | number | undefined;
+}>;
+type ChannelBarModelPropsInput = z.input<typeof channelBarModelPropsSchema>;
+
 declare const clampingShaftCollarModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     boreDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     outerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -3926,6 +4008,59 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }>;
 type PanScrewModelPropsInput = z.input<typeof panScrewModelPropsSchema>;
 
+declare const perforatedSheetModelPropsSchema: z.ZodEffects<z.ZodObject<{
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    width: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    thickness: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    holeDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    pitchX: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    pitchY: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    edgeX: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    edgeY: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    stagger: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    width: number;
+    thickness: number;
+    holeDiameter: number;
+    pitchX: number;
+    pitchY: number;
+    edgeX: number;
+    edgeY: number;
+    stagger: number;
+}, {
+    length: string | number;
+    width: string | number;
+    thickness: string | number;
+    holeDiameter: string | number;
+    pitchX: string | number;
+    pitchY: string | number;
+    edgeX: string | number;
+    edgeY: string | number;
+    stagger?: string | number | undefined;
+}>, {
+    length: number;
+    width: number;
+    thickness: number;
+    holeDiameter: number;
+    pitchX: number;
+    pitchY: number;
+    edgeX: number;
+    edgeY: number;
+    stagger: number;
+}, {
+    length: string | number;
+    width: string | number;
+    thickness: string | number;
+    holeDiameter: string | number;
+    pitchX: string | number;
+    pitchY: string | number;
+    edgeX: string | number;
+    edgeY: string | number;
+    stagger?: string | number | undefined;
+}>;
+type PerforatedSheetModelPropsInput = z.input<typeof perforatedSheetModelPropsSchema>;
+
 declare const plainBushingModelPropsSchema: z.ZodEffects<z.ZodObject<{
     innerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     outerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -3961,6 +4096,100 @@ declare const plainBushingModelPropsSchema: z.ZodEffects<z.ZodObject<{
 }>;
 type PlainBushingModelPropsInput = z.input<typeof plainBushingModelPropsSchema>;
 
+declare const pushFitPlugModelPropsSchema: z.ZodEffects<z.ZodObject<{
+    tubeDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    headDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    headThickness: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    headDiameter: number;
+    tubeDiameter: number;
+    headThickness: number;
+}, {
+    length: string | number;
+    headDiameter: string | number;
+    tubeDiameter: string | number;
+    headThickness: string | number;
+}>, {
+    length: number;
+    headDiameter: number;
+    tubeDiameter: number;
+    headThickness: number;
+}, {
+    length: string | number;
+    headDiameter: string | number;
+    tubeDiameter: string | number;
+    headThickness: string | number;
+}>;
+type PushFitPlugModelPropsInput = z.input<typeof pushFitPlugModelPropsSchema>;
+
+declare const rectangularBarModelPropsSchema: z.ZodEffects<z.ZodObject<{
+    width: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    height: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    cornerRadius: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    width: number;
+    height: number;
+    cornerRadius: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    cornerRadius?: string | number | undefined;
+}>, {
+    length: number;
+    width: number;
+    height: number;
+    cornerRadius: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    cornerRadius?: string | number | undefined;
+}>;
+type RectangularBarModelPropsInput = z.input<typeof rectangularBarModelPropsSchema>;
+
+declare const rectangularTubeModelPropsSchema: z.ZodEffects<z.ZodObject<{
+    width: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    height: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    wallThickness: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    outerRadius: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    innerRadius: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    width: number;
+    height: number;
+    innerRadius: number;
+    wallThickness: number;
+    outerRadius: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    wallThickness: string | number;
+    innerRadius?: string | number | undefined;
+    outerRadius?: string | number | undefined;
+}>, {
+    length: number;
+    width: number;
+    height: number;
+    innerRadius: number;
+    wallThickness: number;
+    outerRadius: number;
+}, {
+    length: string | number;
+    width: string | number;
+    height: string | number;
+    wallThickness: string | number;
+    innerRadius?: string | number | undefined;
+    outerRadius?: string | number | undefined;
+}>;
+type RectangularTubeModelPropsInput = z.input<typeof rectangularTubeModelPropsSchema>;
+
 declare const rigidCouplerModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     boreDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     outerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -4543,44 +4772,44 @@ declare const tSlotExtrusionModelPropsSchema: z.ZodEffects<z.ZodObject<{
     height: number;
     boreDiameter: number;
     profile: "fourtsolid";
+    cornerRadius: number;
     slotWidth: number;
     pocketWidth: number;
     pocketDepth: number;
     lipThickness: number;
-    cornerRadius: number;
 }, {
     length?: string | number | undefined;
     width?: string | number | undefined;
     height?: string | number | undefined;
     boreDiameter?: string | number | undefined;
     profile?: "fourtsolid" | undefined;
+    cornerRadius?: string | number | undefined;
     slotWidth?: string | number | undefined;
     pocketWidth?: string | number | undefined;
     pocketDepth?: string | number | undefined;
     lipThickness?: string | number | undefined;
-    cornerRadius?: string | number | undefined;
 }>, {
     length: number;
     width: number;
     height: number;
     boreDiameter: number;
     profile: "fourtsolid";
+    cornerRadius: number;
     slotWidth: number;
     pocketWidth: number;
     pocketDepth: number;
     lipThickness: number;
-    cornerRadius: number;
 }, {
     length?: string | number | undefined;
     width?: string | number | undefined;
     height?: string | number | undefined;
     boreDiameter?: string | number | undefined;
     profile?: "fourtsolid" | undefined;
+    cornerRadius?: string | number | undefined;
     slotWidth?: string | number | undefined;
     pocketWidth?: string | number | undefined;
     pocketDepth?: string | number | undefined;
     lipThickness?: string | number | undefined;
-    cornerRadius?: string | number | undefined;
 }>;
 type TSlotExtrusionModelPropsInput = z.input<typeof tSlotExtrusionModelPropsSchema>;
 
@@ -4693,6 +4922,18 @@ declare const tSlotInsideCornerModelPropsSchema: z.ZodEffects<z.ZodObject<{
 }>;
 type TSlotInsideCornerModelPropsInput = z.input<typeof tSlotInsideCornerModelPropsSchema>;
 
+type AngleBarProps = AngleBarModelPropsInput & {
+    color?: string;
+};
+declare function AngleBar({ color, ...props }: AngleBarProps): react.JSX.Element;
+
+/** L-section stock, centered envelope on XY with the outside corner at minimum X/Y. Inner root and four free-tip corners accept circular fillets. Length runs along +Z. */
+declare function createAngleBarGeom(input: AngleBarModelPropsInput): jscad.geometries.geom3.Geom3;
+declare function createAngleBarMesh(input: AngleBarModelPropsInput): {
+    positions: number[];
+    indices: number[];
+};
+
 interface BallBearingMeshPart {
     name: string;
     color: string;
@@ -4782,6 +5023,18 @@ type CableGrommetProps = CableGrommetModelPropsInput & {
 declare function createCableGrommetGeom(input: CableGrommetModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function CableGrommet({ color, ...props }: CableGrommetProps): react.JSX.Element;
 
+type ChannelBarProps = ChannelBarModelPropsInput & {
+    color?: string;
+};
+declare function ChannelBar({ color, ...props }: ChannelBarProps): react.JSX.Element;
+
+/** U-section stock centered on XY, opening toward +Y, length along +Z. Root radii and four free-tip radii preserve the outer envelope. */
+declare function createChannelBarGeom(input: ChannelBarModelPropsInput): jscad.geometries.geom3.Geom3;
+declare function createChannelBarMesh(input: ChannelBarModelPropsInput): {
+    positions: number[];
+    indices: number[];
+};
+
 type ShaftMountMesh = {
     positions: number[];
     indices: number[];
@@ -5242,6 +5495,18 @@ type PanScrewProps = PanScrewModelPropsInput & {
 declare function createPanScrewGeom(input: PanScrewModelPropsInput, options?: PanScrewMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
 declare function PanScrew({ color, ...props }: PanScrewProps): react.JSX.Element;
 
+type PerforatedSheetProps = PerforatedSheetModelPropsInput & {
+    color?: string;
+};
+declare function PerforatedSheet({ color, ...props }: PerforatedSheetProps): react.JSX.Element;
+
+/** Flat XY panel, bottom Z=0. Hole centers begin edgeX/edgeY from the negative edges, continue on stated pitches while respecting both opposite margins. Odd rows shift +stagger; incomplete edge holes are omitted. At most 2500 holes. */
+declare function createPerforatedSheetGeom(input: PerforatedSheetModelPropsInput): jscad.geometries.geom3.Geom3;
+declare function createPerforatedSheetMesh(input: PerforatedSheetModelPropsInput): {
+    positions: number[];
+    indices: number[];
+};
+
 /** Shared ring vertices and outward counterclockwise triangles, in millimeters. */
 interface PlainBushingMesh {
     positions: number[];
@@ -5257,6 +5522,42 @@ type PlainBushingProps = PlainBushingModelPropsInput & {
 declare function createPlainBushingGeom(input: PlainBushingModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function PlainBushing({ color, ...props }: PlainBushingProps): react.JSX.Element;
 
+type PushFitPlugProps = PushFitPlugModelPropsInput & {
+    color?: string;
+};
+declare function PushFitPlug({ color, ...props }: PushFitPlugProps): react.JSX.Element;
+
+/** Solid round push-in tube stopper with an integral flat extraction head. Overall length includes the head. Shaft axis is +Z; insertion tip Z=0, shoulder Z=length-headThickness. No seal or pressure rating implied. */
+declare function createPushFitPlugGeom(input: PushFitPlugModelPropsInput): jscad.geometries.geom3.Geom3;
+declare function createPushFitPlugMesh(input: PushFitPlugModelPropsInput): {
+    positions: number[];
+    indices: number[];
+};
+
+type RectangularBarProps = RectangularBarModelPropsInput & {
+    color?: string;
+};
+declare function RectangularBar({ color, ...props }: RectangularBarProps): react.JSX.Element;
+
+/** Solid rectangular stock with optional longitudinal corner radii. Cross section is centered on XY; open length direction is +Z. */
+declare function createRectangularBarGeom(input: RectangularBarModelPropsInput): jscad.geometries.geom3.Geom3;
+declare function createRectangularBarMesh(input: RectangularBarModelPropsInput): {
+    positions: number[];
+    indices: number[];
+};
+
+type RectangularTubeProps = RectangularTubeModelPropsInput & {
+    color?: string;
+};
+declare function RectangularTube({ color, ...props }: RectangularTubeProps): react.JSX.Element;
+
+/** Open rectangular stock tube. Outer and inner radii are independent; minimum corner clearance is validated. Section centered on XY, ends Z=0 and Z=length. */
+declare function createRectangularTubeGeom(input: RectangularTubeModelPropsInput): jscad.geometries.geom3.Geom3;
+declare function createRectangularTubeMesh(input: RectangularTubeModelPropsInput): {
+    positions: number[];
+    indices: number[];
+};
+
 type RigidCouplerMesh = ShaftMountMesh;
 /** Geometry is driven by the corresponding modelprinter schema and hole layout. */
 declare function createRigidCouplerMesh(input: RigidCouplerModelPropsInput): RigidCouplerMesh;
@@ -5450,4 +5751,4 @@ type WormGearProps = WormGearModelPropsInput & {
 declare function createWormGearGeom(input: WormGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function WormGear({ color, ...props }: WormGearProps): react.JSX.Element;
 
-export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, BallBearing, type BallBearingMesh, type BallBearingMeshOptions, type BallBearingMeshPart, type BallBearingProps, BallTransferUnit, type BallTransferUnitMesh, type BallTransferUnitMeshPart, type BallTransferUnitProps, ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, CeramicChipAntenna, ChipBody, type ChipBodyProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, DowelPin, type DowelPinMesh, type DowelPinMeshOptions, type DowelPinProps, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FemaleStandoff, type FemaleStandoffMesh, type FemaleStandoffMeshOptions, type FemaleStandoffProps, FlangeBolt, type FlangeBoltMesh, type FlangeBoltMeshOptions, type FlangeBoltProps, FlangeNut, type FlangeNutMesh, type FlangeNutMeshOptions, type FlangeNutProps, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, HeatSetInsert, type HeatSetInsertMesh, type HeatSetInsertMeshOptions, type HeatSetInsertProps, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, HollowPositioningArmTube, type HollowPositioningArmTubeMesh, type HollowPositioningArmTubeMeshOptions, type HollowPositioningArmTubeProps, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LGA, type LGAProps, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MaleFemaleStandoff, type MaleFemaleStandoffMesh, type MaleFemaleStandoffMeshOptions, type MaleFemaleStandoffProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, NylonLockNut, type NylonLockNutMesh, type NylonLockNutMeshOptions, type NylonLockNutMeshes, type NylonLockNutProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PinHeader, PinRow, PlainBushing, type PlainBushingMesh, type PlainBushingProps, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, RigidCoupler, type RigidCouplerMesh, type RigidCouplerProps, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT89, type SOT89Props, SOT963, SSOP, type SSOPProps, Screen, type ScreenProps, SetScrew, type SetScrewMesh, type SetScrewMeshOptions, type SetScrewProps, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SmdChipLead, type SmdChipLeadProps, SmdLED, type SmdLeadPad, type SmdLedSize, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, Spacer, type SpacerMesh, type SpacerProps, SplitWasher, type SplitWasherMesh, type SplitWasherMeshOptions, type SplitWasherProps, SpurGear, type SpurGearMesh, type SpurGearProps, StampBoard, TO220, type TO220Lead, type TO220Props, TO277, type TO277Props, TO92, type TO92Lead, type TO92Props, TQFP, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, TantalumCapacitor, type TantalumCase, ThreadedRod, type ThreadedRodMesh, type ThreadedRodMeshOptions, type ThreadedRodProps, TorsionSpring, type TorsionSpringMesh, type TorsionSpringMeshOptions, type TorsionSpringProps, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, WormGear, type WormGearMesh, type WormGearProps, createBallBearingGeom, createBallBearingMesh, createBallTransferUnitGeom, createBallTransferUnitMesh, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createDowelPinGeom, createDowelPinMesh, createFemaleStandoffGeom, createFemaleStandoffMesh, createFlangeBoltGeom, createFlangeBoltMesh, createFlangeNutGeom, createFlangeNutMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHeatSetInsertGeom, createHeatSetInsertMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createHollowPositioningArmTubeGeom, createHollowPositioningArmTubeMesh, createMaleFemaleStandoffGeom, createMaleFemaleStandoffMesh, createNylonLockNutGeom, createNylonLockNutGeometries, createNylonLockNutMesh, createNylonLockNutMeshes, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createRigidCouplerGeom, createRigidCouplerMesh, createSetScrewGeom, createSetScrewMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSpacerGeom, createSpacerMesh, createSplitWasherGeom, createSplitWasherMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createThreadedRodGeom, createThreadedRodMesh, createTorsionSpringGeom, createTorsionSpringMesh, createWormGearGeom, createWormGearMesh, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, smdLedDimensions, tantalumCases, twoPadCrystalPackages };
+export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AngleBar, type AngleBarProps, AxialCapacitor, BGA, BallBearing, type BallBearingMesh, type BallBearingMeshOptions, type BallBearingMeshPart, type BallBearingProps, BallTransferUnit, type BallTransferUnitMesh, type BallTransferUnitMeshPart, type BallTransferUnitProps, ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, CeramicChipAntenna, ChannelBar, type ChannelBarProps, ChipBody, type ChipBodyProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, DowelPin, type DowelPinMesh, type DowelPinMeshOptions, type DowelPinProps, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FemaleStandoff, type FemaleStandoffMesh, type FemaleStandoffMeshOptions, type FemaleStandoffProps, FlangeBolt, type FlangeBoltMesh, type FlangeBoltMeshOptions, type FlangeBoltProps, FlangeNut, type FlangeNutMesh, type FlangeNutMeshOptions, type FlangeNutProps, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, HeatSetInsert, type HeatSetInsertMesh, type HeatSetInsertMeshOptions, type HeatSetInsertProps, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, HollowPositioningArmTube, type HollowPositioningArmTubeMesh, type HollowPositioningArmTubeMeshOptions, type HollowPositioningArmTubeProps, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LGA, type LGAProps, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MaleFemaleStandoff, type MaleFemaleStandoffMesh, type MaleFemaleStandoffMeshOptions, type MaleFemaleStandoffProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, NylonLockNut, type NylonLockNutMesh, type NylonLockNutMeshOptions, type NylonLockNutMeshes, type NylonLockNutProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PerforatedSheet, type PerforatedSheetProps, PinHeader, PinRow, PlainBushing, type PlainBushingMesh, type PlainBushingProps, Potentiometer, type PotentiometerLead, type PotentiometerProps, PushFitPlug, type PushFitPlugProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, RectangularBar, type RectangularBarProps, RectangularTube, type RectangularTubeProps, type ResolvedFlexScreenSize, RigidCoupler, type RigidCouplerMesh, type RigidCouplerProps, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT89, type SOT89Props, SOT963, SSOP, type SSOPProps, Screen, type ScreenProps, SetScrew, type SetScrewMesh, type SetScrewMeshOptions, type SetScrewProps, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SmdChipLead, type SmdChipLeadProps, SmdLED, type SmdLeadPad, type SmdLedSize, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, Spacer, type SpacerMesh, type SpacerProps, SplitWasher, type SplitWasherMesh, type SplitWasherMeshOptions, type SplitWasherProps, SpurGear, type SpurGearMesh, type SpurGearProps, StampBoard, TO220, type TO220Lead, type TO220Props, TO277, type TO277Props, TO92, type TO92Lead, type TO92Props, TQFP, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, TantalumCapacitor, type TantalumCase, ThreadedRod, type ThreadedRodMesh, type ThreadedRodMeshOptions, type ThreadedRodProps, TorsionSpring, type TorsionSpringMesh, type TorsionSpringMeshOptions, type TorsionSpringProps, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, WormGear, type WormGearMesh, type WormGearProps, createAngleBarGeom, createAngleBarMesh, createBallBearingGeom, createBallBearingMesh, createBallTransferUnitGeom, createBallTransferUnitMesh, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createChannelBarGeom, createChannelBarMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createDowelPinGeom, createDowelPinMesh, createFemaleStandoffGeom, createFemaleStandoffMesh, createFlangeBoltGeom, createFlangeBoltMesh, createFlangeNutGeom, createFlangeNutMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHeatSetInsertGeom, createHeatSetInsertMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createHollowPositioningArmTubeGeom, createHollowPositioningArmTubeMesh, createMaleFemaleStandoffGeom, createMaleFemaleStandoffMesh, createNylonLockNutGeom, createNylonLockNutGeometries, createNylonLockNutMesh, createNylonLockNutMeshes, createPanScrewGeom, createPanScrewMesh, createPerforatedSheetGeom, createPerforatedSheetMesh, createPlainBushingGeom, createPlainBushingMesh, createPushFitPlugGeom, createPushFitPlugMesh, createRectangularBarGeom, createRectangularBarMesh, createRectangularTubeGeom, createRectangularTubeMesh, createRigidCouplerGeom, createRigidCouplerMesh, createSetScrewGeom, createSetScrewMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSpacerGeom, createSpacerMesh, createSplitWasherGeom, createSplitWasherMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createThreadedRodGeom, createThreadedRodMesh, createTorsionSpringGeom, createTorsionSpringMesh, createWormGearGeom, createWormGearMesh, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, smdLedDimensions, tantalumCases, twoPadCrystalPackages };