jscad-electronics 0.0.220 → 0.0.221

package/dist/index.d.ts

@@ -1227,7 +1227,7 @@ declare const MelfResistor: ({ size, footprint, }: {
 }) => react.JSX.Element;
 
 declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
-    standard: z.ZodEffects<z.ZodDefault<z.ZodEnum<["iso4017", "iso4017:2014"]>>, "iso4017:2014", "iso4017" | "iso4017:2014" | undefined>;
+    iso4017: z.ZodDefault<z.ZodLiteral<true>>;
     metricSize: z.ZodEnum<["M3", "M4", "M5", "M6"]>;
     length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     thread: z.ZodDefault<z.ZodLiteral<"full">>;
@@ -1251,7 +1251,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     headChamferDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
 }, "strict", z.ZodTypeAny, {
     length: number;
-    standard: "iso4017:2014";
+    iso4017: true;
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hex";
@@ -1275,7 +1275,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso4017" | "iso4017:2014" | undefined;
+    iso4017?: true | undefined;
     thread?: "full" | undefined;
     drive?: "hex" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -1297,7 +1297,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     headChamferDiameter?: string | number | undefined;
 }>, {
     length: number;
-    standard: "iso4017:2014";
+    iso4017: true;
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hex";
@@ -1321,7 +1321,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso4017" | "iso4017:2014" | undefined;
+    iso4017?: true | undefined;
     thread?: "full" | undefined;
     drive?: "hex" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -1356,7 +1356,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     headCornerDiameter: 6.3508529610858835;
     headChamferDiameter: 5.5;
     length: number;
-    standard: "iso4017:2014";
+    iso4017: true;
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hex";
@@ -1379,7 +1379,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     headCornerDiameter: 8.082903768654761;
     headChamferDiameter: 7;
     length: number;
-    standard: "iso4017:2014";
+    iso4017: true;
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hex";
@@ -1402,7 +1402,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     headCornerDiameter: 9.237604307034013;
     headChamferDiameter: 8;
     length: number;
-    standard: "iso4017:2014";
+    iso4017: true;
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hex";
@@ -1425,7 +1425,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     headCornerDiameter: 11.547005383792516;
     headChamferDiameter: 10;
     length: number;
-    standard: "iso4017:2014";
+    iso4017: true;
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hex";
@@ -1436,7 +1436,7 @@ declare const hexBoltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso4017" | "iso4017:2014" | undefined;
+    iso4017?: true | undefined;
     thread?: "full" | undefined;
     drive?: "hex" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -2153,7 +2153,7 @@ declare const ballTransferUnitModelPropsSchema: z.ZodEffects<z.ZodObject<{
 type BallTransferUnitModelPropsInput = z.input<typeof ballTransferUnitModelPropsSchema>;
 
 declare const buttonScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
-    standard: z.ZodEffects<z.ZodDefault<z.ZodEnum<["iso7380-1", "iso7380-1:2022"]>>, "iso7380-1:2022", "iso7380-1" | "iso7380-1:2022" | undefined>;
+    iso73801: z.ZodDefault<z.ZodLiteral<true>>;
     metricSize: z.ZodEnum<["M3", "M4", "M5", "M6"]>;
     /** Under-head length; this family supports short fully threaded screws only. */
     length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -2165,66 +2165,66 @@ declare const buttonScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject
     showThreads: z.ZodDefault<z.ZodBoolean>;
 }, "strict", z.ZodTypeAny, {
     length: number;
-    standard: "iso7380-1:2022";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
     threadHand: "right";
     threadClass: "6g";
     showThreads: boolean;
+    iso73801: true;
     threadPitch?: number | undefined;
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso7380-1" | "iso7380-1:2022" | undefined;
     thread?: "full" | undefined;
     drive?: "hexsocket" | undefined;
     threadHand?: "right" | undefined;
     threadClass?: "6g" | undefined;
     showThreads?: boolean | undefined;
     threadPitch?: string | number | undefined;
+    iso73801?: true | undefined;
 }>, {
     length: number;
-    standard: "iso7380-1:2022";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
     threadHand: "right";
     threadClass: "6g";
     showThreads: boolean;
+    iso73801: true;
     threadPitch?: number | undefined;
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso7380-1" | "iso7380-1:2022" | undefined;
     thread?: "full" | undefined;
     drive?: "hexsocket" | undefined;
     threadHand?: "right" | undefined;
     threadClass?: "6g" | undefined;
     showThreads?: boolean | undefined;
     threadPitch?: string | number | undefined;
+    iso73801?: true | undefined;
 }>, {
     length: number;
-    standard: "iso7380-1:2022";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
     threadHand: "right";
     threadClass: "6g";
     showThreads: boolean;
+    iso73801: true;
     threadPitch?: number | undefined;
 } & {
     threadPitch: 1 | 0.5 | 0.7 | 0.8;
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso7380-1" | "iso7380-1:2022" | undefined;
     thread?: "full" | undefined;
     drive?: "hexsocket" | undefined;
     threadHand?: "right" | undefined;
     threadClass?: "6g" | undefined;
     showThreads?: boolean | undefined;
     threadPitch?: string | number | undefined;
+    iso73801?: true | undefined;
 }>;
 type ButtonScrewModelPropsInput = z.input<typeof buttonScrewModelPropsSchema>;
 
@@ -2452,7 +2452,8 @@ declare const compressionSpringModelPropsSchema: z.ZodEffects<z.ZodEffects<z.Zod
 type CompressionSpringModelPropsInput = z.input<typeof compressionSpringModelPropsSchema>;
 
 declare const dowelPinModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
-    standard: z.ZodEffects<z.ZodDefault<z.ZodEnum<["iso8734", "iso8734:1997"]>>, "iso8734:1997", "iso8734" | "iso8734:1997" | undefined>;
+    /** The pinned ISO contract is the default and cannot be disabled. */
+    iso8734: z.ZodDefault<z.ZodLiteral<true>>;
     diameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     /** Overall distance between the two flat end planes, including leads. */
     length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -2460,32 +2461,32 @@ declare const dowelPinModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     endLeadAngle: z.ZodOptional<z.ZodNumber>;
 }, "strict", z.ZodTypeAny, {
     length: number;
-    standard: "iso8734:1997";
     diameter: number;
+    iso8734: true;
     endLeadLength?: number | undefined;
     endLeadAngle?: number | undefined;
 }, {
     length: string | number;
     diameter: string | number;
-    standard?: "iso8734" | "iso8734:1997" | undefined;
+    iso8734?: true | undefined;
     endLeadLength?: string | number | undefined;
     endLeadAngle?: number | undefined;
 }>, {
     length: number;
-    standard: "iso8734:1997";
     diameter: number;
+    iso8734: true;
     endLeadLength?: number | undefined;
     endLeadAngle?: number | undefined;
 }, {
     length: string | number;
     diameter: string | number;
-    standard?: "iso8734" | "iso8734:1997" | undefined;
+    iso8734?: true | undefined;
     endLeadLength?: string | number | undefined;
     endLeadAngle?: number | undefined;
 }>, {
     length: number;
-    standard: "iso8734:1997";
     diameter: number;
+    iso8734: true;
     endLeadLength?: number | undefined;
     endLeadAngle?: number | undefined;
 } & {
@@ -2496,12 +2497,314 @@ declare const dowelPinModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }, {
     length: string | number;
     diameter: string | number;
-    standard?: "iso8734" | "iso8734:1997" | undefined;
+    iso8734?: true | undefined;
     endLeadLength?: string | number | undefined;
     endLeadAngle?: number | undefined;
 }>;
 type DowelPinModelPropsInput = z.input<typeof dowelPinModelPropsSchema>;
 
+declare const femaleStandoffModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
+    metricSize: z.ZodDefault<z.ZodEnum<["M2", "M2.5", "M3", "M4", "M5", "M6", "M8", "M10", "M12"]>>;
+    acrossFlats: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    /** End-plane distance of the body; lower mounting face is Z=0. */
+    length: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    hex: z.ZodDefault<z.ZodLiteral<true>>;
+    threadedThrough: z.ZodDefault<z.ZodLiteral<true>>;
+    leftHand: z.ZodDefault<z.ZodBoolean>;
+    showThreads: z.ZodDefault<z.ZodBoolean>;
+    /** Axial/radial 45-degree setback of the outer hex edges at both ends. */
+    endChamfer: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    hex: true;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    showThreads: boolean;
+    threadedThrough: true;
+    leftHand: boolean;
+    threadPitch?: number | undefined;
+    acrossFlats?: number | undefined;
+    endChamfer?: number | undefined;
+}, {
+    length?: string | number | undefined;
+    hex?: true | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    acrossFlats?: string | number | undefined;
+    threadedThrough?: true | undefined;
+    leftHand?: boolean | undefined;
+    endChamfer?: string | number | undefined;
+}>, {
+    length: number;
+    hex: true;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    showThreads: boolean;
+    threadedThrough: true;
+    leftHand: boolean;
+    threadPitch?: number | undefined;
+    acrossFlats?: number | undefined;
+    endChamfer?: number | undefined;
+}, {
+    length?: string | number | undefined;
+    hex?: true | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    acrossFlats?: string | number | undefined;
+    threadedThrough?: true | undefined;
+    leftHand?: boolean | undefined;
+    endChamfer?: string | number | undefined;
+}>, {
+    length: number;
+    hex: true;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    showThreads: boolean;
+    threadedThrough: true;
+    leftHand: boolean;
+    threadPitch?: number | undefined;
+    acrossFlats?: number | undefined;
+    endChamfer?: number | undefined;
+} & {
+    acrossFlats: number;
+    threadPitch: number;
+    endChamfer: number;
+}, {
+    length?: string | number | undefined;
+    hex?: true | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    acrossFlats?: string | number | undefined;
+    threadedThrough?: true | undefined;
+    leftHand?: boolean | undefined;
+    endChamfer?: string | number | undefined;
+}>;
+type FemaleStandoffModelPropsInput = z.input<typeof femaleStandoffModelPropsSchema>;
+
+declare const flangeboltModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
+    iso4162: z.ZodDefault<z.ZodLiteral<true>>;
+    metricSize: z.ZodEnum<["M5", "M6", "M8", "M10"]>;
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    fullThread: z.ZodDefault<z.ZodLiteral<true>>;
+    plainFace: z.ZodDefault<z.ZodLiteral<true>>;
+    leftHand: z.ZodDefault<z.ZodBoolean>;
+    showThreads: z.ZodDefault<z.ZodBoolean>;
+    diameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    headAcrossFlats: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    headHeight: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    flangeDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    flangeThickness: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    underHeadRadius: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    tipChamfer: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    headChamferAngle: z.ZodOptional<z.ZodNumber>;
+    headChamferDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    headCornerDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    flangeSlopeAngle: z.ZodOptional<z.ZodNumber>;
+    threadRootDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    threadPitchDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4162: true;
+    fullThread: true;
+    plainFace: true;
+    diameter?: number | undefined;
+    threadPitch?: number | undefined;
+    headAcrossFlats?: number | undefined;
+    headHeight?: number | undefined;
+    underHeadRadius?: number | undefined;
+    headChamferAngle?: number | undefined;
+    tipChamfer?: number | undefined;
+    threadRootDiameter?: number | undefined;
+    threadPitchDiameter?: number | undefined;
+    headCornerDiameter?: number | undefined;
+    headChamferDiameter?: number | undefined;
+    flangeDiameter?: number | undefined;
+    flangeThickness?: number | undefined;
+    flangeSlopeAngle?: number | undefined;
+}, {
+    length: string | number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads?: boolean | undefined;
+    diameter?: string | number | undefined;
+    threadPitch?: string | number | undefined;
+    headAcrossFlats?: string | number | undefined;
+    headHeight?: string | number | undefined;
+    underHeadRadius?: string | number | undefined;
+    headChamferAngle?: number | undefined;
+    tipChamfer?: string | number | undefined;
+    threadRootDiameter?: string | number | undefined;
+    threadPitchDiameter?: string | number | undefined;
+    headCornerDiameter?: string | number | undefined;
+    headChamferDiameter?: string | number | undefined;
+    flangeDiameter?: string | number | undefined;
+    flangeThickness?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    iso4162?: true | undefined;
+    fullThread?: true | undefined;
+    plainFace?: true | undefined;
+    flangeSlopeAngle?: number | undefined;
+}>, {
+    length: number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4162: true;
+    fullThread: true;
+    plainFace: true;
+    diameter?: number | undefined;
+    threadPitch?: number | undefined;
+    headAcrossFlats?: number | undefined;
+    headHeight?: number | undefined;
+    underHeadRadius?: number | undefined;
+    headChamferAngle?: number | undefined;
+    tipChamfer?: number | undefined;
+    threadRootDiameter?: number | undefined;
+    threadPitchDiameter?: number | undefined;
+    headCornerDiameter?: number | undefined;
+    headChamferDiameter?: number | undefined;
+    flangeDiameter?: number | undefined;
+    flangeThickness?: number | undefined;
+    flangeSlopeAngle?: number | undefined;
+}, {
+    length: string | number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads?: boolean | undefined;
+    diameter?: string | number | undefined;
+    threadPitch?: string | number | undefined;
+    headAcrossFlats?: string | number | undefined;
+    headHeight?: string | number | undefined;
+    underHeadRadius?: string | number | undefined;
+    headChamferAngle?: number | undefined;
+    tipChamfer?: string | number | undefined;
+    threadRootDiameter?: string | number | undefined;
+    threadPitchDiameter?: string | number | undefined;
+    headCornerDiameter?: string | number | undefined;
+    headChamferDiameter?: string | number | undefined;
+    flangeDiameter?: string | number | undefined;
+    flangeThickness?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    iso4162?: true | undefined;
+    fullThread?: true | undefined;
+    plainFace?: true | undefined;
+    flangeSlopeAngle?: number | undefined;
+}>, {
+    diameter: 5;
+    threadPitch: 0.8;
+    headAcrossFlats: 7;
+    headHeight: 5.6;
+    flangeDiameter: 11.4;
+    flangeThickness: 1;
+    underHeadRadius: 0.2;
+    tipChamfer: 0.4;
+    headChamferAngle: 30;
+    headChamferDiameter: 7;
+    headCornerDiameter: 8.082903768654761;
+    flangeSlopeAngle: 22.5;
+    threadRootDiameter: 4.018504542377636;
+    threadPitchDiameter: 4.480384757729337;
+    length: number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4162: true;
+    fullThread: true;
+    plainFace: true;
+} | {
+    diameter: 6;
+    threadPitch: 1;
+    headAcrossFlats: 8;
+    headHeight: 6.8;
+    flangeDiameter: 13.6;
+    flangeThickness: 1.1;
+    underHeadRadius: 0.25;
+    tipChamfer: 0.5;
+    headChamferAngle: 30;
+    headChamferDiameter: 8;
+    headCornerDiameter: 9.237604307034013;
+    flangeSlopeAngle: 22.5;
+    threadRootDiameter: 4.773130677972045;
+    threadPitchDiameter: 5.350480947161671;
+    length: number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4162: true;
+    fullThread: true;
+    plainFace: true;
+} | {
+    diameter: 8;
+    threadPitch: 1.25;
+    headAcrossFlats: 10;
+    headHeight: 8.5;
+    flangeDiameter: 17;
+    flangeThickness: 1.2;
+    underHeadRadius: 0.4;
+    tipChamfer: 0.625;
+    headChamferAngle: 30;
+    headChamferDiameter: 10;
+    headCornerDiameter: 11.547005383792516;
+    flangeSlopeAngle: 22.5;
+    threadRootDiameter: 6.466413347465057;
+    threadPitchDiameter: 7.188101183952089;
+    length: number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4162: true;
+    fullThread: true;
+    plainFace: true;
+} | {
+    diameter: 10;
+    threadPitch: 1.5;
+    headAcrossFlats: 13;
+    headHeight: 9.7;
+    flangeDiameter: 20.8;
+    flangeThickness: 1.5;
+    underHeadRadius: 0.4;
+    tipChamfer: 0.75;
+    headChamferAngle: 30;
+    headChamferDiameter: 13;
+    headCornerDiameter: 15.01110699893027;
+    flangeSlopeAngle: 22.5;
+    threadRootDiameter: 8.159696016958067;
+    threadPitchDiameter: 9.025721420742506;
+    length: number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4162: true;
+    fullThread: true;
+    plainFace: true;
+}, {
+    length: string | number;
+    metricSize: "M5" | "M6" | "M8" | "M10";
+    showThreads?: boolean | undefined;
+    diameter?: string | number | undefined;
+    threadPitch?: string | number | undefined;
+    headAcrossFlats?: string | number | undefined;
+    headHeight?: string | number | undefined;
+    underHeadRadius?: string | number | undefined;
+    headChamferAngle?: number | undefined;
+    tipChamfer?: string | number | undefined;
+    threadRootDiameter?: string | number | undefined;
+    threadPitchDiameter?: string | number | undefined;
+    headCornerDiameter?: string | number | undefined;
+    headChamferDiameter?: string | number | undefined;
+    flangeDiameter?: string | number | undefined;
+    flangeThickness?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    iso4162?: true | undefined;
+    fullThread?: true | undefined;
+    plainFace?: true | undefined;
+    flangeSlopeAngle?: number | undefined;
+}>;
+type FlangeBoltModelPropsInput = z.input<typeof flangeboltModelPropsSchema>;
+
 declare const flangedBushingModelPropsSchema: z.ZodEffects<z.ZodObject<{
     innerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     outerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -2541,8 +2844,69 @@ declare const flangedBushingModelPropsSchema: z.ZodEffects<z.ZodObject<{
 }>;
 type FlangedBushingModelPropsInput = z.input<typeof flangedBushingModelPropsSchema>;
 
+declare const flangeNutModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
+    iso4161: z.ZodDefault<z.ZodLiteral<true>>;
+    metricSize: z.ZodEnum<["M5", "M6", "M8", "M10", "M12", "M14", "M16", "M20"]>;
+    plainFace: z.ZodDefault<z.ZodLiteral<true>>;
+    threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    rightHanded: z.ZodDefault<z.ZodLiteral<true>>;
+    threadClass: z.ZodDefault<z.ZodLiteral<"6H">>;
+    showThreads: z.ZodDefault<z.ZodBoolean>;
+}, "strict", z.ZodTypeAny, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20";
+    threadClass: "6H";
+    showThreads: boolean;
+    plainFace: true;
+    iso4161: true;
+    rightHanded: true;
+    threadPitch?: number | undefined;
+}, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20";
+    threadClass?: "6H" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    plainFace?: true | undefined;
+    iso4161?: true | undefined;
+    rightHanded?: true | undefined;
+}>, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20";
+    threadClass: "6H";
+    showThreads: boolean;
+    plainFace: true;
+    iso4161: true;
+    rightHanded: true;
+    threadPitch?: number | undefined;
+}, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20";
+    threadClass?: "6H" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    plainFace?: true | undefined;
+    iso4161?: true | undefined;
+    rightHanded?: true | undefined;
+}>, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20";
+    threadClass: "6H";
+    showThreads: boolean;
+    plainFace: true;
+    iso4161: true;
+    rightHanded: true;
+    threadPitch?: number | undefined;
+} & {
+    threadPitch: 2 | 1 | 0.8 | 1.5 | 2.5 | 1.25 | 1.75;
+}, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20";
+    threadClass?: "6H" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    plainFace?: true | undefined;
+    iso4161?: true | undefined;
+    rightHanded?: true | undefined;
+}>;
+type FlangeNutModelPropsInput = z.input<typeof flangeNutModelPropsSchema>;
+
 declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
-    standard: z.ZodEffects<z.ZodDefault<z.ZodEnum<["iso10642", "iso10642:2019"]>>, "iso10642:2019", "iso10642" | "iso10642:2019" | undefined>;
+    iso10642: z.ZodDefault<z.ZodLiteral<true>>;
     metricSize: z.ZodEnum<["M3", "M4", "M5", "M6"]>;
     length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     thread: z.ZodDefault<z.ZodLiteral<"full">>;
@@ -2567,7 +2931,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadPitchDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
 }, "strict", z.ZodTypeAny, {
     length: number;
-    standard: "iso10642:2019";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
@@ -2575,6 +2938,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
+    iso10642: true;
     diameter?: number | undefined;
     threadPitch?: number | undefined;
     headHeight?: number | undefined;
@@ -2592,7 +2956,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso10642" | "iso10642:2019" | undefined;
     thread?: "full" | undefined;
     drive?: "hexsocket" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -2608,6 +2971,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     tipChamfer?: string | number | undefined;
     threadRootDiameter?: string | number | undefined;
     threadPitchDiameter?: string | number | undefined;
+    iso10642?: true | undefined;
     headDiameter?: string | number | undefined;
     socketAcrossFlats?: string | number | undefined;
     socketDepth?: string | number | undefined;
@@ -2615,7 +2979,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     headAngle?: number | undefined;
 }>, {
     length: number;
-    standard: "iso10642:2019";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
@@ -2623,6 +2986,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
+    iso10642: true;
     diameter?: number | undefined;
     threadPitch?: number | undefined;
     headHeight?: number | undefined;
@@ -2640,7 +3004,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso10642" | "iso10642:2019" | undefined;
     thread?: "full" | undefined;
     drive?: "hexsocket" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -2656,6 +3019,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     tipChamfer?: string | number | undefined;
     threadRootDiameter?: string | number | undefined;
     threadPitchDiameter?: string | number | undefined;
+    iso10642?: true | undefined;
     headDiameter?: string | number | undefined;
     socketAcrossFlats?: string | number | undefined;
     socketDepth?: string | number | undefined;
@@ -2677,7 +3041,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadRootDiameter: 2.3865653389860224;
     threadPitchDiameter: 2.6752404735808355;
     length: number;
-    standard: "iso10642:2019";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
@@ -2685,6 +3048,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
+    iso10642: true;
 } | {
     diameter: 4;
     threadPitch: 0.7;
@@ -2701,7 +3065,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadRootDiameter: 3.141191474580432;
     threadPitchDiameter: 3.5453366630131695;
     length: number;
-    standard: "iso10642:2019";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
@@ -2709,6 +3072,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
+    iso10642: true;
 } | {
     diameter: 5;
     threadPitch: 0.8;
@@ -2725,7 +3089,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadRootDiameter: 4.018504542377636;
     threadPitchDiameter: 4.480384757729337;
     length: number;
-    standard: "iso10642:2019";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
@@ -2733,6 +3096,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
+    iso10642: true;
 } | {
     diameter: 6;
     threadPitch: 1;
@@ -2749,7 +3113,6 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadRootDiameter: 4.773130677972045;
     threadPitchDiameter: 5.350480947161671;
     length: number;
-    standard: "iso10642:2019";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "hexsocket";
@@ -2757,10 +3120,10 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
+    iso10642: true;
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso10642" | "iso10642:2019" | undefined;
     thread?: "full" | undefined;
     drive?: "hexsocket" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -2776,6 +3139,7 @@ declare const flatHeadScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     tipChamfer?: string | number | undefined;
     threadRootDiameter?: string | number | undefined;
     threadPitchDiameter?: string | number | undefined;
+    iso10642?: true | undefined;
     headDiameter?: string | number | undefined;
     socketAcrossFlats?: string | number | undefined;
     socketDepth?: string | number | undefined;
@@ -2804,11 +3168,11 @@ declare const heatSetInsertModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     metricSize: "M3" | "M4" | "M5" | "M6";
     showThreads: boolean;
     outerDiameter: number;
+    leftHand: boolean;
     knurlDepth: number;
     knurlPitch: number;
     knurlTeeth: number;
     diamondKnurl: true;
-    leftHand: boolean;
     diameter?: number | undefined;
     threadPitch?: number | undefined;
     threadPitchDiameter?: number | undefined;
@@ -2825,8 +3189,8 @@ declare const heatSetInsertModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     diameter?: string | number | undefined;
     threadPitch?: string | number | undefined;
     threadPitchDiameter?: string | number | undefined;
-    diamondKnurl?: true | undefined;
     leftHand?: boolean | undefined;
+    diamondKnurl?: true | undefined;
     threadMinorDiameter?: string | number | undefined;
     rootOuterDiameter?: string | number | undefined;
 }>, {
@@ -2834,11 +3198,11 @@ declare const heatSetInsertModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     metricSize: "M3" | "M4" | "M5" | "M6";
     showThreads: boolean;
     outerDiameter: number;
+    leftHand: boolean;
     knurlDepth: number;
     knurlPitch: number;
     knurlTeeth: number;
     diamondKnurl: true;
-    leftHand: boolean;
     diameter?: number | undefined;
     threadPitch?: number | undefined;
     threadPitchDiameter?: number | undefined;
@@ -2855,8 +3219,8 @@ declare const heatSetInsertModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     diameter?: string | number | undefined;
     threadPitch?: string | number | undefined;
     threadPitchDiameter?: string | number | undefined;
-    diamondKnurl?: true | undefined;
     leftHand?: boolean | undefined;
+    diamondKnurl?: true | undefined;
     threadMinorDiameter?: string | number | undefined;
     rootOuterDiameter?: string | number | undefined;
 }>, {
@@ -2869,11 +3233,11 @@ declare const heatSetInsertModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     metricSize: "M3" | "M4" | "M5" | "M6";
     showThreads: boolean;
     outerDiameter: number;
+    leftHand: boolean;
     knurlDepth: number;
     knurlPitch: number;
     knurlTeeth: number;
     diamondKnurl: true;
-    leftHand: boolean;
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
@@ -2885,15 +3249,17 @@ declare const heatSetInsertModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObje
     diameter?: string | number | undefined;
     threadPitch?: string | number | undefined;
     threadPitchDiameter?: string | number | undefined;
-    diamondKnurl?: true | undefined;
     leftHand?: boolean | undefined;
+    diamondKnurl?: true | undefined;
     threadMinorDiameter?: string | number | undefined;
     rootOuterDiameter?: string | number | undefined;
 }>;
 type HeatSetInsertModelPropsInput = z.input<typeof heatSetInsertModelPropsSchema>;
 
 declare const hexNutModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
-    standard: z.ZodOptional<z.ZodEnum<["iso4032", "iso4032:2023", "din934", "asmeb18.2.2"]>>;
+    iso4032: z.ZodOptional<z.ZodBoolean>;
+    din934: z.ZodOptional<z.ZodBoolean>;
+    asmeb1822: z.ZodOptional<z.ZodBoolean>;
     metricSize: z.ZodOptional<z.ZodEnum<["M1.6", "M2", "M2.5", "M3", "M3.5", "M4", "M5", "M6", "M7", "M8", "M10", "M12", "M14", "M16", "M18", "M20", "M22", "M24"]>>;
     imperialSize: z.ZodOptional<z.ZodEnum<["#2", "#4", "#6", "#8", "#10", "#12", "1/4", "5/16", "3/8", "7/16", "1/2", "5/8", "3/4", "7/8", "1"]>>;
     threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
@@ -2903,54 +3269,68 @@ declare const hexNutModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }, "strict", z.ZodTypeAny, {
     threadHand: "right";
     showThreads: boolean;
-    standard?: "iso4032" | "iso4032:2023" | "din934" | "asmeb18.2.2" | undefined;
-    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M1.6" | "M3.5" | "M7" | "M14" | "M16" | "M18" | "M20" | "M22" | "M24" | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20" | "M1.6" | "M3.5" | "M7" | "M18" | "M22" | "M24" | undefined;
     threadClass?: "6H" | "2B" | undefined;
     threadPitch?: number | undefined;
+    iso4032?: boolean | undefined;
+    din934?: boolean | undefined;
+    asmeb1822?: boolean | undefined;
     imperialSize?: "1" | "#2" | "#4" | "#6" | "#8" | "#10" | "#12" | "1/4" | "5/16" | "3/8" | "7/16" | "1/2" | "5/8" | "3/4" | "7/8" | undefined;
 }, {
-    standard?: "iso4032" | "iso4032:2023" | "din934" | "asmeb18.2.2" | undefined;
-    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M1.6" | "M3.5" | "M7" | "M14" | "M16" | "M18" | "M20" | "M22" | "M24" | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20" | "M1.6" | "M3.5" | "M7" | "M18" | "M22" | "M24" | undefined;
     threadHand?: "right" | undefined;
     threadClass?: "6H" | "2B" | undefined;
     showThreads?: boolean | undefined;
     threadPitch?: string | number | undefined;
+    iso4032?: boolean | undefined;
+    din934?: boolean | undefined;
+    asmeb1822?: boolean | undefined;
     imperialSize?: "1" | "#2" | "#4" | "#6" | "#8" | "#10" | "#12" | "1/4" | "5/16" | "3/8" | "7/16" | "1/2" | "5/8" | "3/4" | "7/8" | undefined;
 }>, {
     threadHand: "right";
     showThreads: boolean;
-    standard?: "iso4032" | "iso4032:2023" | "din934" | "asmeb18.2.2" | undefined;
-    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M1.6" | "M3.5" | "M7" | "M14" | "M16" | "M18" | "M20" | "M22" | "M24" | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20" | "M1.6" | "M3.5" | "M7" | "M18" | "M22" | "M24" | undefined;
     threadClass?: "6H" | "2B" | undefined;
     threadPitch?: number | undefined;
+    iso4032?: boolean | undefined;
+    din934?: boolean | undefined;
+    asmeb1822?: boolean | undefined;
     imperialSize?: "1" | "#2" | "#4" | "#6" | "#8" | "#10" | "#12" | "1/4" | "5/16" | "3/8" | "7/16" | "1/2" | "5/8" | "3/4" | "7/8" | undefined;
 }, {
-    standard?: "iso4032" | "iso4032:2023" | "din934" | "asmeb18.2.2" | undefined;
-    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M1.6" | "M3.5" | "M7" | "M14" | "M16" | "M18" | "M20" | "M22" | "M24" | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20" | "M1.6" | "M3.5" | "M7" | "M18" | "M22" | "M24" | undefined;
     threadHand?: "right" | undefined;
     threadClass?: "6H" | "2B" | undefined;
     showThreads?: boolean | undefined;
     threadPitch?: string | number | undefined;
+    iso4032?: boolean | undefined;
+    din934?: boolean | undefined;
+    asmeb1822?: boolean | undefined;
     imperialSize?: "1" | "#2" | "#4" | "#6" | "#8" | "#10" | "#12" | "1/4" | "5/16" | "3/8" | "7/16" | "1/2" | "5/8" | "3/4" | "7/8" | undefined;
 }>, {
     threadHand: "right";
     showThreads: boolean;
-    standard?: "iso4032" | "iso4032:2023" | "din934" | "asmeb18.2.2" | undefined;
-    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M1.6" | "M3.5" | "M7" | "M14" | "M16" | "M18" | "M20" | "M22" | "M24" | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20" | "M1.6" | "M3.5" | "M7" | "M18" | "M22" | "M24" | undefined;
     threadClass?: "6H" | "2B" | undefined;
     threadPitch?: number | undefined;
+    iso4032?: boolean | undefined;
+    din934?: boolean | undefined;
+    asmeb1822?: boolean | undefined;
     imperialSize?: "1" | "#2" | "#4" | "#6" | "#8" | "#10" | "#12" | "1/4" | "5/16" | "3/8" | "7/16" | "1/2" | "5/8" | "3/4" | "7/8" | undefined;
 } & {
-    standard: "iso4032:2023" | "din934" | "asmeb18.2.2";
     threadPitch: number;
     threadClass: "6H" | "2B";
+    iso4032: boolean;
+    din934: boolean;
+    asmeb1822: boolean;
 }, {
-    standard?: "iso4032" | "iso4032:2023" | "din934" | "asmeb18.2.2" | undefined;
-    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M1.6" | "M3.5" | "M7" | "M14" | "M16" | "M18" | "M20" | "M22" | "M24" | undefined;
+    metricSize?: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12" | "M14" | "M16" | "M20" | "M1.6" | "M3.5" | "M7" | "M18" | "M22" | "M24" | undefined;
     threadHand?: "right" | undefined;
     threadClass?: "6H" | "2B" | undefined;
     showThreads?: boolean | undefined;
     threadPitch?: string | number | undefined;
+    iso4032?: boolean | undefined;
+    din934?: boolean | undefined;
+    asmeb1822?: boolean | undefined;
     imperialSize?: "1" | "#2" | "#4" | "#6" | "#8" | "#10" | "#12" | "1/4" | "5/16" | "3/8" | "7/16" | "1/2" | "5/8" | "3/4" | "7/8" | undefined;
 }>;
 type HexNutModelPropsInput = z.input<typeof hexNutModelPropsSchema>;
@@ -3008,8 +3388,163 @@ declare const hollowPositioningArmTubeModelPropsSchema: z.ZodEffects<z.ZodObject
 }>;
 type HollowPositioningArmTubeModelPropsInput = z.input<typeof hollowPositioningArmTubeModelPropsSchema>;
 
+declare const maleFemaleStandoffModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
+    metricSize: z.ZodEnum<["M2", "M2.5", "M3", "M4", "M5", "M6", "M8", "M10", "M12"]>;
+    acrossFlats: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    /** Body height above its lower mounting plane Z=0, excluding the stud. */
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    studLength: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    /** Blind female socket depth measured down from the upper mounting plane. */
+    femaleDepth: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    hex: z.ZodDefault<z.ZodLiteral<true>>;
+    threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    leftHand: z.ZodDefault<z.ZodBoolean>;
+    showThreads: z.ZodDefault<z.ZodBoolean>;
+    bodyChamfer: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    studChamfer: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    mouthChamfer: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    hex: true;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    showThreads: boolean;
+    acrossFlats: number;
+    leftHand: boolean;
+    studLength: number;
+    femaleDepth: number;
+    threadPitch?: number | undefined;
+    bodyChamfer?: number | undefined;
+    studChamfer?: number | undefined;
+    mouthChamfer?: number | undefined;
+}, {
+    length: string | number;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    acrossFlats: string | number;
+    studLength: string | number;
+    femaleDepth: string | number;
+    hex?: true | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    bodyChamfer?: string | number | undefined;
+    studChamfer?: string | number | undefined;
+    mouthChamfer?: string | number | undefined;
+}>, {
+    length: number;
+    hex: true;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    showThreads: boolean;
+    acrossFlats: number;
+    leftHand: boolean;
+    studLength: number;
+    femaleDepth: number;
+    threadPitch?: number | undefined;
+    bodyChamfer?: number | undefined;
+    studChamfer?: number | undefined;
+    mouthChamfer?: number | undefined;
+}, {
+    length: string | number;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    acrossFlats: string | number;
+    studLength: string | number;
+    femaleDepth: string | number;
+    hex?: true | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    bodyChamfer?: string | number | undefined;
+    studChamfer?: string | number | undefined;
+    mouthChamfer?: string | number | undefined;
+}>, {
+    length: number;
+    hex: true;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    showThreads: boolean;
+    acrossFlats: number;
+    leftHand: boolean;
+    studLength: number;
+    femaleDepth: number;
+    threadPitch?: number | undefined;
+    bodyChamfer?: number | undefined;
+    studChamfer?: number | undefined;
+    mouthChamfer?: number | undefined;
+} & {
+    threadPitch: number;
+    bodyChamfer: number;
+    studChamfer: number;
+    mouthChamfer: number;
+}, {
+    length: string | number;
+    metricSize: "M3" | "M4" | "M5" | "M6" | "M2" | "M2.5" | "M8" | "M10" | "M12";
+    acrossFlats: string | number;
+    studLength: string | number;
+    femaleDepth: string | number;
+    hex?: true | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    bodyChamfer?: string | number | undefined;
+    studChamfer?: string | number | undefined;
+    mouthChamfer?: string | number | undefined;
+}>;
+type MaleFemaleStandoffModelPropsInput = z.input<typeof maleFemaleStandoffModelPropsSchema>;
+
+declare const nylonLockNutModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
+    iso7040: z.ZodDefault<z.ZodLiteral<true>>;
+    metricSize: z.ZodEnum<["M5", "M6", "M8", "M10", "M12"]>;
+    threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    rightHanded: z.ZodDefault<z.ZodLiteral<true>>;
+    threadClass: z.ZodDefault<z.ZodLiteral<"6H">>;
+    showThreads: z.ZodDefault<z.ZodBoolean>;
+}, "strict", z.ZodTypeAny, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12";
+    threadClass: "6H";
+    showThreads: boolean;
+    rightHanded: true;
+    iso7040: true;
+    threadPitch?: number | undefined;
+}, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12";
+    threadClass?: "6H" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    rightHanded?: true | undefined;
+    iso7040?: true | undefined;
+}>, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12";
+    threadClass: "6H";
+    showThreads: boolean;
+    rightHanded: true;
+    iso7040: true;
+    threadPitch?: number | undefined;
+}, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12";
+    threadClass?: "6H" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    rightHanded?: true | undefined;
+    iso7040?: true | undefined;
+}>, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12";
+    threadClass: "6H";
+    showThreads: boolean;
+    rightHanded: true;
+    iso7040: true;
+    threadPitch?: number | undefined;
+} & {
+    threadPitch: 1 | 0.8 | 1.5 | 1.25 | 1.75;
+}, {
+    metricSize: "M5" | "M6" | "M8" | "M10" | "M12";
+    threadClass?: "6H" | undefined;
+    showThreads?: boolean | undefined;
+    threadPitch?: string | number | undefined;
+    rightHanded?: true | undefined;
+    iso7040?: true | undefined;
+}>;
+type NylonLockNutModelPropsInput = z.input<typeof nylonLockNutModelPropsSchema>;
+
 declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
-    standard: z.ZodEffects<z.ZodDefault<z.ZodEnum<["iso7045", "iso7045:2011"]>>, "iso7045:2011", "iso7045" | "iso7045:2011" | undefined>;
+    iso7045: z.ZodDefault<z.ZodLiteral<true>>;
     metricSize: z.ZodEnum<["M3", "M4", "M5", "M6"]>;
     length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     thread: z.ZodDefault<z.ZodLiteral<"full">>;
@@ -3018,7 +3553,7 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadClass: z.ZodDefault<z.ZodLiteral<"6g">>;
     threadGender: z.ZodDefault<z.ZodLiteral<"male">>;
     showThreads: z.ZodDefault<z.ZodBoolean>;
-    recessStandard: z.ZodDefault<z.ZodLiteral<"iso4757:1983">>;
+    iso4757: z.ZodDefault<z.ZodLiteral<true>>;
     recessType: z.ZodDefault<z.ZodLiteral<"H">>;
     diameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
     threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
@@ -3048,7 +3583,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     recessReferencePlaneHeight: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
 }, "strict", z.ZodTypeAny, {
     length: number;
-    standard: "iso7045:2011";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "phillips";
@@ -3056,7 +3590,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
-    recessStandard: "iso4757:1983";
+    iso7045: true;
+    iso4757: true;
     recessType: "H";
     diameter?: number | undefined;
     threadPitch?: number | undefined;
@@ -3087,7 +3622,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso7045" | "iso7045:2011" | undefined;
     thread?: "full" | undefined;
     drive?: "phillips" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -3105,7 +3639,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadPitchDiameter?: string | number | undefined;
     headDiameter?: string | number | undefined;
     maximumThreadLength?: string | number | undefined;
-    recessStandard?: "iso4757:1983" | undefined;
+    iso7045?: true | undefined;
+    iso4757?: true | undefined;
     recessType?: "H" | undefined;
     crownRadius?: string | number | undefined;
     recessNumber?: number | undefined;
@@ -3124,7 +3659,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     recessReferencePlaneHeight?: string | number | undefined;
 }>, {
     length: number;
-    standard: "iso7045:2011";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "phillips";
@@ -3132,7 +3666,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
-    recessStandard: "iso4757:1983";
+    iso7045: true;
+    iso4757: true;
     recessType: "H";
     diameter?: number | undefined;
     threadPitch?: number | undefined;
@@ -3163,7 +3698,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso7045" | "iso7045:2011" | undefined;
     thread?: "full" | undefined;
     drive?: "phillips" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -3181,7 +3715,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadPitchDiameter?: string | number | undefined;
     headDiameter?: string | number | undefined;
     maximumThreadLength?: string | number | undefined;
-    recessStandard?: "iso4757:1983" | undefined;
+    iso7045?: true | undefined;
+    iso4757?: true | undefined;
     recessType?: "H" | undefined;
     crownRadius?: string | number | undefined;
     recessNumber?: number | undefined;
@@ -3226,7 +3761,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     recessInnerWingAngle: 28;
     recessReferencePlaneHeight: 2.169696007084728;
     length: number;
-    standard: "iso7045:2011";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "phillips";
@@ -3234,7 +3768,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
-    recessStandard: "iso4757:1983";
+    iso7045: true;
+    iso4757: true;
     recessType: "H";
 } | {
     diameter: 4;
@@ -3264,7 +3799,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     recessInnerWingAngle: 28;
     recessReferencePlaneHeight: 2.7163714733492106;
     length: number;
-    standard: "iso7045:2011";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "phillips";
@@ -3272,7 +3806,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
-    recessStandard: "iso4757:1983";
+    iso7045: true;
+    iso4757: true;
     recessType: "H";
 } | {
     diameter: 5;
@@ -3302,7 +3837,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     recessInnerWingAngle: 28;
     recessReferencePlaneHeight: 3.315608971054121;
     length: number;
-    standard: "iso7045:2011";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "phillips";
@@ -3310,7 +3844,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
-    recessStandard: "iso4757:1983";
+    iso7045: true;
+    iso4757: true;
     recessType: "H";
 } | {
     diameter: 6;
@@ -3340,7 +3875,6 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     recessInnerWingAngle: 28;
     recessReferencePlaneHeight: 3.986026848459362;
     length: number;
-    standard: "iso7045:2011";
     metricSize: "M3" | "M4" | "M5" | "M6";
     thread: "full";
     drive: "phillips";
@@ -3348,12 +3882,12 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadClass: "6g";
     threadGender: "male";
     showThreads: boolean;
-    recessStandard: "iso4757:1983";
+    iso7045: true;
+    iso4757: true;
     recessType: "H";
 }, {
     length: string | number;
     metricSize: "M3" | "M4" | "M5" | "M6";
-    standard?: "iso7045" | "iso7045:2011" | undefined;
     thread?: "full" | undefined;
     drive?: "phillips" | undefined;
     threadHand?: "right" | "left" | undefined;
@@ -3371,7 +3905,8 @@ declare const panScrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     threadPitchDiameter?: string | number | undefined;
     headDiameter?: string | number | undefined;
     maximumThreadLength?: string | number | undefined;
-    recessStandard?: "iso4757:1983" | undefined;
+    iso7045?: true | undefined;
+    iso4757?: true | undefined;
     recessType?: "H" | undefined;
     crownRadius?: string | number | undefined;
     recessNumber?: number | undefined;
@@ -3527,6 +4062,189 @@ declare const rigidCouplerModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObjec
 }>;
 type RigidCouplerModelPropsInput = z.input<typeof rigidCouplerModelPropsSchema>;
 
+declare const setscrewModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
+    iso4029: z.ZodDefault<z.ZodLiteral<true>>;
+    metricSize: z.ZodEnum<["M3", "M4", "M5", "M6"]>;
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    hexSocket: z.ZodDefault<z.ZodLiteral<true>>;
+    cupPoint: z.ZodDefault<z.ZodLiteral<true>>;
+    leftHand: z.ZodDefault<z.ZodBoolean>;
+    showThreads: z.ZodDefault<z.ZodBoolean>;
+    diameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    threadPitch: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    socketAcrossFlats: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    socketDepth: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    cupDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    cupDepth: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    pointTaperLength: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    mouthChamfer: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    threadRootDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+    threadPitchDiameter: z.ZodOptional<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4029: true;
+    hexSocket: true;
+    cupPoint: true;
+    diameter?: number | undefined;
+    threadPitch?: number | undefined;
+    threadRootDiameter?: number | undefined;
+    threadPitchDiameter?: number | undefined;
+    socketAcrossFlats?: number | undefined;
+    socketDepth?: number | undefined;
+    mouthChamfer?: number | undefined;
+    cupDiameter?: number | undefined;
+    cupDepth?: number | undefined;
+    pointTaperLength?: number | undefined;
+}, {
+    length: string | number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads?: boolean | undefined;
+    diameter?: string | number | undefined;
+    threadPitch?: string | number | undefined;
+    threadRootDiameter?: string | number | undefined;
+    threadPitchDiameter?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    socketAcrossFlats?: string | number | undefined;
+    socketDepth?: string | number | undefined;
+    mouthChamfer?: string | number | undefined;
+    iso4029?: true | undefined;
+    hexSocket?: true | undefined;
+    cupPoint?: true | undefined;
+    cupDiameter?: string | number | undefined;
+    cupDepth?: string | number | undefined;
+    pointTaperLength?: string | number | undefined;
+}>, {
+    length: number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4029: true;
+    hexSocket: true;
+    cupPoint: true;
+    diameter?: number | undefined;
+    threadPitch?: number | undefined;
+    threadRootDiameter?: number | undefined;
+    threadPitchDiameter?: number | undefined;
+    socketAcrossFlats?: number | undefined;
+    socketDepth?: number | undefined;
+    mouthChamfer?: number | undefined;
+    cupDiameter?: number | undefined;
+    cupDepth?: number | undefined;
+    pointTaperLength?: number | undefined;
+}, {
+    length: string | number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads?: boolean | undefined;
+    diameter?: string | number | undefined;
+    threadPitch?: string | number | undefined;
+    threadRootDiameter?: string | number | undefined;
+    threadPitchDiameter?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    socketAcrossFlats?: string | number | undefined;
+    socketDepth?: string | number | undefined;
+    mouthChamfer?: string | number | undefined;
+    iso4029?: true | undefined;
+    hexSocket?: true | undefined;
+    cupPoint?: true | undefined;
+    cupDiameter?: string | number | undefined;
+    cupDepth?: string | number | undefined;
+    pointTaperLength?: string | number | undefined;
+}>, {
+    diameter: 3;
+    threadPitch: 0.5;
+    socketAcrossFlats: 1.5;
+    socketDepth: 2;
+    cupDiameter: 1.4;
+    cupDepth: 0.40414518843273806;
+    pointTaperLength: 0.8;
+    mouthChamfer: 0.25;
+    threadRootDiameter: 2.3865653389860224;
+    threadPitchDiameter: 2.6752404735808355;
+    length: number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4029: true;
+    hexSocket: true;
+    cupPoint: true;
+} | {
+    diameter: 4;
+    threadPitch: 0.7;
+    socketAcrossFlats: 2;
+    socketDepth: 2.5;
+    cupDiameter: 2;
+    cupDepth: 0.5773502691896258;
+    pointTaperLength: 1;
+    mouthChamfer: 0.35;
+    threadRootDiameter: 3.141191474580432;
+    threadPitchDiameter: 3.5453366630131695;
+    length: number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4029: true;
+    hexSocket: true;
+    cupPoint: true;
+} | {
+    diameter: 5;
+    threadPitch: 0.8;
+    socketAcrossFlats: 2.5;
+    socketDepth: 3;
+    cupDiameter: 2.5;
+    cupDepth: 0.7216878364870323;
+    pointTaperLength: 1.25;
+    mouthChamfer: 0.4;
+    threadRootDiameter: 4.018504542377636;
+    threadPitchDiameter: 4.480384757729337;
+    length: number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4029: true;
+    hexSocket: true;
+    cupPoint: true;
+} | {
+    diameter: 6;
+    threadPitch: 1;
+    socketAcrossFlats: 3;
+    socketDepth: 3.5;
+    cupDiameter: 3;
+    cupDepth: 0.8660254037844387;
+    pointTaperLength: 1.5;
+    mouthChamfer: 0.5;
+    threadRootDiameter: 4.773130677972045;
+    threadPitchDiameter: 5.350480947161671;
+    length: number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads: boolean;
+    leftHand: boolean;
+    iso4029: true;
+    hexSocket: true;
+    cupPoint: true;
+}, {
+    length: string | number;
+    metricSize: "M3" | "M4" | "M5" | "M6";
+    showThreads?: boolean | undefined;
+    diameter?: string | number | undefined;
+    threadPitch?: string | number | undefined;
+    threadRootDiameter?: string | number | undefined;
+    threadPitchDiameter?: string | number | undefined;
+    leftHand?: boolean | undefined;
+    socketAcrossFlats?: string | number | undefined;
+    socketDepth?: string | number | undefined;
+    mouthChamfer?: string | number | undefined;
+    iso4029?: true | undefined;
+    hexSocket?: true | undefined;
+    cupPoint?: true | undefined;
+    cupDiameter?: string | number | undefined;
+    cupDepth?: string | number | undefined;
+    pointTaperLength?: string | number | undefined;
+}>;
+type SetScrewModelPropsInput = z.input<typeof setscrewModelPropsSchema>;
+
 declare const shaftCollarModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject<{
     boreDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     outerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -3614,6 +4332,41 @@ declare const shaftCollarModelPropsSchema: z.ZodEffects<z.ZodEffects<z.ZodObject
 }>;
 type ShaftCollarModelPropsInput = z.input<typeof shaftCollarModelPropsSchema>;
 
+declare const spacerModelPropsSchema: z.ZodEffects<z.ZodObject<{
+    innerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    outerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    /** End-plane distance, including the rim chamfers. */
+    length: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
+    round: z.ZodDefault<z.ZodLiteral<true>>;
+    /** Equal axial/radial setbacks at all four 45-degree rims. */
+    chamfer: z.ZodDefault<z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodEffects<z.ZodString, string, string>]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>>;
+}, "strict", z.ZodTypeAny, {
+    length: number;
+    round: true;
+    innerDiameter: number;
+    outerDiameter: number;
+    chamfer: number;
+}, {
+    length: string | number;
+    innerDiameter: string | number;
+    outerDiameter: string | number;
+    round?: true | undefined;
+    chamfer?: string | number | undefined;
+}>, {
+    length: number;
+    round: true;
+    innerDiameter: number;
+    outerDiameter: number;
+    chamfer: number;
+}, {
+    length: string | number;
+    innerDiameter: string | number;
+    outerDiameter: string | number;
+    round?: true | undefined;
+    chamfer?: string | number | undefined;
+}>;
+type SpacerModelPropsInput = z.input<typeof spacerModelPropsSchema>;
+
 declare const splitWasherModelPropsSchema: z.ZodEffects<z.ZodObject<{
     innerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodString]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
     outerDiameter: z.ZodEffects<z.ZodPipeline<z.ZodUnion<[z.ZodNumber, z.ZodString]>, z.ZodEffects<z.ZodUnion<[z.ZodNumber, z.ZodString]>, number, string | number>>, number, string | number>;
@@ -4079,6 +4832,42 @@ type DowelPinProps = DowelPinModelPropsInput & {
 declare function createDowelPinGeom(input: DowelPinModelPropsInput, resolution?: DowelPinMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
 declare function DowelPin({ color, ...props }: DowelPinProps): react.JSX.Element;
 
+/** Indexed counterclockwise triangles in millimeters. */
+interface FemaleStandoffMesh {
+    positions: number[];
+    indices: number[];
+}
+/** Renderer resolution affects tessellation only, never model specifications. */
+interface FemaleStandoffMeshOptions {
+    radialSegments?: number;
+    segmentsPerPitch?: number;
+}
+/** Closed hex body with a through internal helix and two 45-degree bore mouths. */
+declare function createFemaleStandoffMesh(input: FemaleStandoffModelPropsInput, options?: FemaleStandoffMeshOptions): FemaleStandoffMesh;
+
+type FemaleStandoffProps = FemaleStandoffModelPropsInput & {
+    color?: string;
+};
+declare function createFemaleStandoffGeom(input: FemaleStandoffModelPropsInput, resolution?: FemaleStandoffMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function FemaleStandoff({ color, ...props }: FemaleStandoffProps): react.JSX.Element;
+
+interface FlangeBoltMeshOptions {
+    radialSegments?: number;
+    threadStepsPerTurn?: number;
+}
+/** Welded, outward-oriented indexed surface in millimeters. */
+interface FlangeBoltMesh {
+    positions: number[];
+    indices: number[];
+}
+declare function createFlangeBoltMesh(input: FlangeBoltModelPropsInput, options?: FlangeBoltMeshOptions): FlangeBoltMesh;
+
+type FlangeBoltProps = FlangeBoltModelPropsInput & {
+    color?: string;
+};
+declare function createFlangeBoltGeom(input: FlangeBoltModelPropsInput, options?: FlangeBoltMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function FlangeBolt({ color, ...props }: FlangeBoltProps): react.JSX.Element;
+
 /** Shared ring vertices and outward counterclockwise triangles, in millimeters. */
 interface FlangedBushingMesh {
     positions: number[];
@@ -4094,6 +4883,27 @@ type FlangedBushingProps = FlangedBushingModelPropsInput & {
 declare function createFlangedBushingGeom(input: FlangedBushingModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function FlangedBushing({ color, ...props }: FlangedBushingProps): react.JSX.Element;
 
+/** Welded, outward counterclockwise triangle surface in millimeters. */
+interface FlangeNutMesh {
+    positions: number[];
+    indices: number[];
+}
+/** Tessellation only; all model dimensions come from modelprinter. */
+interface FlangeNutMeshOptions {
+    radialSegments?: number;
+    segmentsPerPitch?: number;
+}
+/** Single closed annular shell: flange, hexagon, entrances and internal thread.
+ * The flange shares the hex body's vertices rather than overlapping solids.
+ */
+declare function createFlangeNutMesh(input: FlangeNutModelPropsInput, options?: FlangeNutMeshOptions): FlangeNutMesh;
+
+type FlangeNutProps = FlangeNutModelPropsInput & {
+    color?: string;
+};
+declare function createFlangeNutGeom(input: FlangeNutModelPropsInput, resolution?: FlangeNutMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function FlangeNut({ color, ...props }: FlangeNutProps): react.JSX.Element;
+
 interface FlatHeadScrewMeshOptions {
     radialSegments?: number;
     threadStepsPerTurn?: number;
@@ -4352,6 +5162,24 @@ type HollowPositioningArmTubeProps = HollowPositioningArmTubeModelPropsInput & {
 declare function createHollowPositioningArmTubeGeom(input: HollowPositioningArmTubeModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function HollowPositioningArmTube({ color, ...props }: HollowPositioningArmTubeProps): react.JSX.Element;
 
+/** Closed, outward-wound indexed triangles in millimeters. */
+interface MaleFemaleStandoffMesh {
+    positions: number[];
+    indices: number[];
+}
+interface MaleFemaleStandoffMeshOptions {
+    radialSegments?: number;
+    segmentsPerPitch?: number;
+}
+/** Body above the lower shoulder; threaded male stud below; flat-floor blind socket above. */
+declare function createMaleFemaleStandoffMesh(input: MaleFemaleStandoffModelPropsInput, options?: MaleFemaleStandoffMeshOptions): MaleFemaleStandoffMesh;
+
+type MaleFemaleStandoffProps = MaleFemaleStandoffModelPropsInput & {
+    color?: string;
+};
+declare function createMaleFemaleStandoffGeom(input: MaleFemaleStandoffModelPropsInput, resolution?: MaleFemaleStandoffMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function MaleFemaleStandoff({ color, ...props }: MaleFemaleStandoffProps): react.JSX.Element;
+
 type NemaMotorProps = NemaMotorModelPropsInput & {
     bodyColor?: string;
     capColor?: string;
@@ -4367,6 +5195,36 @@ declare const NEMA8: (props: NemaFrameMotorProps) => react.JSX.Element;
 declare const NEMA17: (props: NemaFrameMotorProps) => react.JSX.Element;
 declare const NEMA23: (props: NemaFrameMotorProps) => react.JSX.Element;
 
+interface NylonLockNutMesh {
+    positions: number[];
+    indices: number[];
+}
+interface NylonLockNutMeshOptions {
+    radialSegments?: number;
+    segmentsPerPitch?: number;
+}
+interface NylonLockNutMeshes {
+    metal: NylonLockNutMesh;
+    insert: NylonLockNutMesh;
+}
+/** Two closed material shells with exact touching pocket interfaces; no volume overlap. */
+declare function createNylonLockNutMeshes(input: NylonLockNutModelPropsInput, options?: NylonLockNutMeshOptions): NylonLockNutMeshes;
+/** Closed assembly exterior without buried metal/nylon contact surfaces. */
+declare function createNylonLockNutMesh(input: NylonLockNutModelPropsInput, options?: NylonLockNutMeshOptions): NylonLockNutMesh;
+
+type NylonLockNutProps = NylonLockNutModelPropsInput & {
+    color?: string;
+    insertColor?: string;
+};
+/** Monolithic assembly exterior for CAD/export consumers. */
+declare function createNylonLockNutGeom(input: NylonLockNutModelPropsInput, resolution?: NylonLockNutMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+/** Separate closed material solids for colored rendering. */
+declare function createNylonLockNutGeometries(input: NylonLockNutModelPropsInput, resolution?: NylonLockNutMeshOptions): {
+    metal: _jscad_modeling_src_geometries_types.Geom3;
+    insert: _jscad_modeling_src_geometries_types.Geom3;
+};
+declare function NylonLockNut({ color, insertColor, ...props }: NylonLockNutProps): react.JSX.Element;
+
 interface PanScrewMeshOptions {
     radialSegments?: number;
     threadStepsPerTurn?: number;
@@ -4410,6 +5268,23 @@ type RigidCouplerProps = RigidCouplerModelPropsInput & {
 declare function createRigidCouplerGeom(input: RigidCouplerModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function RigidCoupler({ color, ...props }: RigidCouplerProps): react.JSX.Element;
 
+interface SetScrewMeshOptions {
+    radialSegments?: number;
+    threadStepsPerTurn?: number;
+}
+/** Welded, outward-oriented indexed surface in millimeters. */
+interface SetScrewMesh {
+    positions: number[];
+    indices: number[];
+}
+declare function createSetScrewMesh(input: SetScrewModelPropsInput, options?: SetScrewMeshOptions): SetScrewMesh;
+
+type SetScrewProps = SetScrewModelPropsInput & {
+    color?: string;
+};
+declare function createSetScrewGeom(input: SetScrewModelPropsInput, options?: SetScrewMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function SetScrew({ color, ...props }: SetScrewProps): react.JSX.Element;
+
 type ShaftCollarMesh = ShaftMountMesh;
 /** Geometry is driven by the corresponding modelprinter schema and hole layout. */
 declare function createShaftCollarMesh(input: ShaftCollarModelPropsInput): ShaftCollarMesh;
@@ -4440,6 +5315,17 @@ type SheetMetalProps = SheetMetalModelPropsInput & {
 declare function createSheetMetalGeom(input: SheetMetalModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function SheetMetal({ color, ...props }: SheetMetalProps): react.JSX.Element;
 
+type SpacerMesh = PlainBushingMesh;
+/** Closed annular surface; the through opening never receives a center cap. */
+declare function createSpacerMesh(input: SpacerModelPropsInput): SpacerMesh;
+
+type SpacerProps = SpacerModelPropsInput & {
+    color?: string;
+};
+/** Round unthreaded spacer, with lower end at Z=0 and upper end at Z=length. */
+declare function createSpacerGeom(input: SpacerModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function Spacer({ color, ...props }: SpacerProps): react.JSX.Element;
+
 interface SplitWasherMesh {
     positions: number[];
     indices: number[];
@@ -4564,4 +5450,4 @@ type WormGearProps = WormGearModelPropsInput & {
 declare function createWormGearGeom(input: WormGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function WormGear({ color, ...props }: WormGearProps): react.JSX.Element;
 
-export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, BallBearing, type BallBearingMesh, type BallBearingMeshOptions, type BallBearingMeshPart, type BallBearingProps, BallTransferUnit, type BallTransferUnitMesh, type BallTransferUnitMeshPart, type BallTransferUnitProps, ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, CeramicChipAntenna, ChipBody, type ChipBodyProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, DowelPin, type DowelPinMesh, type DowelPinMeshOptions, type DowelPinProps, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, HeatSetInsert, type HeatSetInsertMesh, type HeatSetInsertMeshOptions, type HeatSetInsertProps, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, HollowPositioningArmTube, type HollowPositioningArmTubeMesh, type HollowPositioningArmTubeMeshOptions, type HollowPositioningArmTubeProps, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LGA, type LGAProps, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PinHeader, PinRow, PlainBushing, type PlainBushingMesh, type PlainBushingProps, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, RigidCoupler, type RigidCouplerMesh, type RigidCouplerProps, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT89, type SOT89Props, SOT963, SSOP, type SSOPProps, Screen, type ScreenProps, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SmdChipLead, type SmdChipLeadProps, SmdLED, type SmdLeadPad, type SmdLedSize, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, SplitWasher, type SplitWasherMesh, type SplitWasherMeshOptions, type SplitWasherProps, SpurGear, type SpurGearMesh, type SpurGearProps, StampBoard, TO220, type TO220Lead, type TO220Props, TO277, type TO277Props, TO92, type TO92Lead, type TO92Props, TQFP, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, TantalumCapacitor, type TantalumCase, ThreadedRod, type ThreadedRodMesh, type ThreadedRodMeshOptions, type ThreadedRodProps, TorsionSpring, type TorsionSpringMesh, type TorsionSpringMeshOptions, type TorsionSpringProps, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, WormGear, type WormGearMesh, type WormGearProps, createBallBearingGeom, createBallBearingMesh, createBallTransferUnitGeom, createBallTransferUnitMesh, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createDowelPinGeom, createDowelPinMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHeatSetInsertGeom, createHeatSetInsertMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createHollowPositioningArmTubeGeom, createHollowPositioningArmTubeMesh, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createRigidCouplerGeom, createRigidCouplerMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSplitWasherGeom, createSplitWasherMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createThreadedRodGeom, createThreadedRodMesh, createTorsionSpringGeom, createTorsionSpringMesh, createWormGearGeom, createWormGearMesh, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, smdLedDimensions, tantalumCases, twoPadCrystalPackages };
+export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, BallBearing, type BallBearingMesh, type BallBearingMeshOptions, type BallBearingMeshPart, type BallBearingProps, BallTransferUnit, type BallTransferUnitMesh, type BallTransferUnitMeshPart, type BallTransferUnitProps, ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, CeramicChipAntenna, ChipBody, type ChipBodyProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, DowelPin, type DowelPinMesh, type DowelPinMeshOptions, type DowelPinProps, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FemaleStandoff, type FemaleStandoffMesh, type FemaleStandoffMeshOptions, type FemaleStandoffProps, FlangeBolt, type FlangeBoltMesh, type FlangeBoltMeshOptions, type FlangeBoltProps, FlangeNut, type FlangeNutMesh, type FlangeNutMeshOptions, type FlangeNutProps, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, HeatSetInsert, type HeatSetInsertMesh, type HeatSetInsertMeshOptions, type HeatSetInsertProps, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, HollowPositioningArmTube, type HollowPositioningArmTubeMesh, type HollowPositioningArmTubeMeshOptions, type HollowPositioningArmTubeProps, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LGA, type LGAProps, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MaleFemaleStandoff, type MaleFemaleStandoffMesh, type MaleFemaleStandoffMeshOptions, type MaleFemaleStandoffProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, NylonLockNut, type NylonLockNutMesh, type NylonLockNutMeshOptions, type NylonLockNutMeshes, type NylonLockNutProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PinHeader, PinRow, PlainBushing, type PlainBushingMesh, type PlainBushingProps, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, RigidCoupler, type RigidCouplerMesh, type RigidCouplerProps, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT89, type SOT89Props, SOT963, SSOP, type SSOPProps, Screen, type ScreenProps, SetScrew, type SetScrewMesh, type SetScrewMeshOptions, type SetScrewProps, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SmdChipLead, type SmdChipLeadProps, SmdLED, type SmdLeadPad, type SmdLedSize, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, Spacer, type SpacerMesh, type SpacerProps, SplitWasher, type SplitWasherMesh, type SplitWasherMeshOptions, type SplitWasherProps, SpurGear, type SpurGearMesh, type SpurGearProps, StampBoard, TO220, type TO220Lead, type TO220Props, TO277, type TO277Props, TO92, type TO92Lead, type TO92Props, TQFP, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, TantalumCapacitor, type TantalumCase, ThreadedRod, type ThreadedRodMesh, type ThreadedRodMeshOptions, type ThreadedRodProps, TorsionSpring, type TorsionSpringMesh, type TorsionSpringMeshOptions, type TorsionSpringProps, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, WormGear, type WormGearMesh, type WormGearProps, createBallBearingGeom, createBallBearingMesh, createBallTransferUnitGeom, createBallTransferUnitMesh, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createDowelPinGeom, createDowelPinMesh, createFemaleStandoffGeom, createFemaleStandoffMesh, createFlangeBoltGeom, createFlangeBoltMesh, createFlangeNutGeom, createFlangeNutMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHeatSetInsertGeom, createHeatSetInsertMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createHollowPositioningArmTubeGeom, createHollowPositioningArmTubeMesh, createMaleFemaleStandoffGeom, createMaleFemaleStandoffMesh, createNylonLockNutGeom, createNylonLockNutGeometries, createNylonLockNutMesh, createNylonLockNutMeshes, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createRigidCouplerGeom, createRigidCouplerMesh, createSetScrewGeom, createSetScrewMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSpacerGeom, createSpacerMesh, createSplitWasherGeom, createSplitWasherMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createThreadedRodGeom, createThreadedRodMesh, createTorsionSpringGeom, createTorsionSpringMesh, createWormGearGeom, createWormGearMesh, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, smdLedDimensions, tantalumCases, twoPadCrystalPackages };