jscad-electronics 0.0.215 → 0.0.217

package/dist/index.d.ts

@@ -1,43 +1,43 @@
-import * as react_jsx_runtime from 'react/jsx-runtime';
+import * as react from 'react';
 import { AnyCircuitElement, PcbSmtPad, PcbPlatedHole } from 'circuit-json';
 import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
-import { BallBearingModelPropsInput, ButtonScrewModelPropsInput, CableGrommetModelPropsInput, ClampingShaftCollarModelPropsInput, CompressionSpringModelPropsInput, FlangedBushingModelPropsInput, FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexNutModelPropsInput, HexSocketBoltModelPropsInput, HollowPositioningArmTubeModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, RigidCouplerModelPropsInput, ShaftCollarModelPropsInput, SheetMetalModelPropsInput, ThreadedRodModelPropsInput, TorsionSpringModelPropsInput, TSlotExtrusionModelPropsInput, TSlotGussetModelPropsInput, TSlotInsideCornerModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
+import { BallBearingModelPropsInput, BallTransferUnitModelPropsInput, ButtonScrewModelPropsInput, CableGrommetModelPropsInput, ClampingShaftCollarModelPropsInput, CompressionSpringModelPropsInput, FlangedBushingModelPropsInput, FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexNutModelPropsInput, HexSocketBoltModelPropsInput, HollowPositioningArmTubeModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, RigidCouplerModelPropsInput, ShaftCollarModelPropsInput, SheetMetalModelPropsInput, ThreadedRodModelPropsInput, TorsionSpringModelPropsInput, TSlotExtrusionModelPropsInput, TSlotGussetModelPropsInput, TSlotInsideCornerModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
 
 declare const A01005: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A0201: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A0402: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A0603: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A0805: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A1206: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A1210: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A2010: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const A2512: ({ color }: {
     color?: string | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 interface BGAProps {
     packageWidth?: number;
@@ -51,7 +51,7 @@ interface BGAProps {
     missingBalls?: number[];
     footprintString?: string;
 }
-declare const BGA: ({ packageWidth, packageLength, packageHeight, standoffHeight, ballPitch, ballDiameter, ballRows, ballColumns, missingBalls, footprintString, }: BGAProps) => react_jsx_runtime.JSX.Element;
+declare const BGA: ({ packageWidth, packageLength, packageHeight, standoffHeight, ballPitch, ballDiameter, ballRows, ballColumns, missingBalls, footprintString, }: BGAProps) => react.JSX.Element;
 
 /** Molded perimeter-land LGA. Opposite rows have equal counts; adjacent rows
  * may differ. Pads remain entirely under the body, with no QFN exposed pad.
@@ -72,7 +72,7 @@ interface LGAProps {
     /** Representative metallization thickness, not solder standoff. */
     landThickness: number;
 }
-declare function LGA(p: LGAProps): react_jsx_runtime.JSX.Element;
+declare function LGA(p: LGAProps): react.JSX.Element;
 
 interface ChipBodyProps {
     width: number;
@@ -100,7 +100,7 @@ interface ChipBodyProps {
     notchWidth?: number;
     chamferSize?: number;
 }
-declare const ChipBody: ({ center, width, length, height, heightAboveSurface, color, taperRatio, faceRatio, straightHeightRatio, includeNotch, notchRadius, notchPosition, notchRotation, notchLength, notchWidth, chamferSize, }: ChipBodyProps) => react_jsx_runtime.JSX.Element;
+declare const ChipBody: ({ center, width, length, height, heightAboveSurface, color, taperRatio, faceRatio, straightHeightRatio, includeNotch, notchRadius, notchPosition, notchRotation, notchLength, notchWidth, chamferSize, }: ChipBodyProps) => react.JSX.Element;
 
 interface CrystalProps {
     horizontalPadPitch?: number;
@@ -109,29 +109,29 @@ interface CrystalProps {
     padHeight?: number;
     bodyHeight?: number;
 }
-declare const Crystal: ({ horizontalPadPitch, verticalPadPitch, padWidth, padHeight, bodyHeight, }: CrystalProps) => react_jsx_runtime.JSX.Element;
+declare const Crystal: ({ horizontalPadPitch, verticalPadPitch, padWidth, padHeight, bodyHeight, }: CrystalProps) => react.JSX.Element;
 
 declare const ExtrudedPads: ({ circuitJson, footprint, }: {
     circuitJson?: AnyCircuitElement[];
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element | null;
+}) => react.JSX.Element | null;
 
 declare const FootprintPad: ({ pad, isPin1, }: {
     pad: PcbSmtPad;
     isPin1?: boolean;
-}) => react_jsx_runtime.JSX.Element | null;
+}) => react.JSX.Element | null;
 
 declare const FootprintPlatedHole: ({ hole, isPin1, }: {
     hole: PcbPlatedHole;
     isPin1?: boolean;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 /**
  * Outputs a 3d model for any [footprinter string](https://github.com/tscircuit/footprinter)
  */
 declare const Footprinter3d: ({ footprint }: {
     footprint: string;
-}) => react_jsx_runtime.JSX.Element | null;
+}) => react.JSX.Element | null;
 
 declare const StampBoard: ({ bodyWidth, boardThickness, leadWidth, leadLength, leadsPitch, leadsLeft, leadsRight, leadsTop, leadsBottom, innerHoles, innerHoleEdgeDistance, innerHoleDiameter, }: {
     bodyWidth?: number;
@@ -146,25 +146,25 @@ declare const StampBoard: ({ bodyWidth, boardThickness, leadWidth, leadLength, l
     innerHoles?: boolean;
     innerHoleEdgeDistance?: number;
     innerHoleDiameter?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const SOT233P: ({ fullWidth, fullLength, color, }?: {
     fullWidth?: number;
     fullLength?: number;
     color?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const SOT23W: ({ fullWidth, fullLength }: {
     fullWidth?: number | undefined;
     fullLength?: number | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const SOT563: ({ fullWidth, fullLength }: {
     fullWidth?: number | undefined;
     fullLength?: number | undefined;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
-declare const SOT723: () => react_jsx_runtime.JSX.Element;
+declare const SOT723: () => react.JSX.Element;
 
 interface SmdChipLeadProps {
     thickness: number;
@@ -184,7 +184,7 @@ interface SmdChipLeadProps {
 /**
  * Curved lead for an SMD chip
  */
-declare const SmdChipLead: (props: SmdChipLeadProps) => react_jsx_runtime.JSX.Element;
+declare const SmdChipLead: (props: SmdChipLeadProps) => react.JSX.Element;
 
 type SmdLedSize = "0402" | "0603" | "0805";
 /** Flat-top, two-contact LED packages in mm. The 0603 outline follows
@@ -214,7 +214,7 @@ declare const smdLedDimensions: {
 declare function SmdLED({ footprint, color, }: {
     footprint: SmdLedSize;
     color?: string;
-}): react_jsx_runtime.JSX.Element;
+}): react.JSX.Element;
 
 interface SmdPinHeaderProps {
     numberOfPins: number;
@@ -226,7 +226,7 @@ interface SmdPinHeaderProps {
     matingPinLength?: number;
     tailSpan?: number;
 }
-declare const SmdPinHeader: ({ numberOfPins, pitch, pinThickness, bodyWidth, bodyHeight, standoffHeight, matingPinLength, tailSpan, }: SmdPinHeaderProps) => react_jsx_runtime.JSX.Element;
+declare const SmdPinHeader: ({ numberOfPins, pitch, pinThickness, bodyWidth, bodyHeight, standoffHeight, matingPinLength, tailSpan, }: SmdPinHeaderProps) => react.JSX.Element;
 
 /** Physical package dimensions in mm, independent of copper land dimensions.
  * X crosses the two lead rows; Y runs along each row. Z=0 is the seating plane.
@@ -260,20 +260,20 @@ declare const LegacySOIC: ({ pinCount, leadLength, leadWidth, pitch, bodyWidth,
     leadWidth: number;
     leadLength: number;
     bodyWidth: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 /** Standard SOIC physical outline. Supplying leadSpan selects explicit package
  * dimensions; the legacy land-derived API is retained for existing callers.
  * See examples/fixtures/soic-variants.ts for MS-012 dimensional evidence.
  */
 type SOICProps = Parameters<typeof LegacySOIC>[0] | DualRowGullWingDimensions;
-declare const SOIC: (props: SOICProps) => react_jsx_runtime.JSX.Element;
+declare const SOIC: (props: SOICProps) => react.JSX.Element;
 
 /** Explicit SSOP physical outline (e.g. JEDEC MO-150), in mm. Copper land
  * dimensions do not identify the package. Pin 1 is at -X,+Y; Z=0 seats the feet.
  * Mold draft, bend curvature and the pin-1 dimple are visual approximations.
  */
 type SSOPProps = Omit<DualRowGullWingDimensions, "exposedPadWidth" | "exposedPadLength">;
-declare const SSOP: (props: SSOPProps) => react_jsx_runtime.JSX.Element;
+declare const SSOP: (props: SSOPProps) => react.JSX.Element;
 
 declare const LegacyTssop: ({ pinCount, leadLength, leadWidth, pitch, bodyWidth, }: {
     pinCount: number;
@@ -281,13 +281,13 @@ declare const LegacyTssop: ({ pinCount, leadLength, leadWidth, pitch, bodyWidth,
     leadWidth: number;
     leadLength: number;
     bodyWidth: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 /** TSSOP physical outline. leadSpan selects explicit package dimensions;
  * existing land-derived callers retain their current geometry.
  * See examples/fixtures/tssop-variants.ts for standard outline evidence.
  */
 type TssopProps = Parameters<typeof LegacyTssop>[0] | DualRowGullWingDimensions;
-declare const Tssop: (props: TssopProps) => react_jsx_runtime.JSX.Element;
+declare const Tssop: (props: TssopProps) => react.JSX.Element;
 
 declare const LegacyMSOP: ({ pinCount, padContactLength, leadWidth, pitch, bodyWidth, }: {
     pinCount: number;
@@ -295,12 +295,12 @@ declare const LegacyMSOP: ({ pinCount, padContactLength, leadWidth, pitch, bodyW
     leadWidth?: number;
     padContactLength?: number;
     bodyWidth?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 /** MO-187 MSOP physical outline. leadSpan selects explicit package dimensions;
  * existing callers retain the legacy default outline. See fixture source notes.
  */
 type MSOPProps = Parameters<typeof LegacyMSOP>[0] | DualRowGullWingDimensions;
-declare const MSOP: (props: MSOPProps) => react_jsx_runtime.JSX.Element;
+declare const MSOP: (props: MSOPProps) => react.JSX.Element;
 
 declare const VSSOP: ({ pinCount, pitch, leadWidth, leadLength, bodyWidth, bodyLength, }: {
     pinCount: 8 | 10;
@@ -309,7 +309,7 @@ declare const VSSOP: ({ pinCount, pitch, leadWidth, leadLength, bodyWidth, bodyL
     leadLength?: number;
     bodyWidth?: number;
     bodyLength?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 /** Physical QFN outline, in mm. Unlike the legacy land-derived API, bodyWidth
  * and bodyLength measure the mold itself. Terminal spans measure outer edges,
@@ -346,10 +346,10 @@ declare const LegacyQFN: ({ num_pins, bodyWidth, bodyLength, bodyThickness, ther
     padLength?: number;
     pitch?: number;
     thermalPadThickness?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 /** Supplying bodyHeight opts into physical dimensions; legacy callers are unchanged. */
 type QFNProps = Parameters<typeof LegacyQFN>[0] | PhysicalQfnDimensions;
-declare const QFN: (props: QFNProps) => react_jsx_runtime.JSX.Element;
+declare const QFN: (props: QFNProps) => react.JSX.Element;
 
 declare const DFN: ({ num_pins, bodyWidth, bodyLength, bodyThickness, thermalPadSize, padWidth, padLength, pitch, thermalPadThickness, bodyStyle, standoff, terminalInset, terminalThickness, pin1TerminalChamfer, pin1MarkWidth, }: {
     num_pins: number;
@@ -376,7 +376,7 @@ declare const DFN: ({ num_pins, bodyWidth, bodyLength, bodyThickness, thermalPad
     pin1TerminalChamfer?: number;
     /** For rectangular bodies: optional top pin-1 stripe width in mm; zero omits it. */
     pin1MarkWidth?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const QFP: ({ pinCount, pitch, leadWidth, padContactLength, bodyWidth, }: {
     pinCount: number;
@@ -384,9 +384,9 @@ declare const QFP: ({ pinCount, pitch, leadWidth, padContactLength, bodyWidth, }
     leadWidth?: number;
     padContactLength?: number;
     bodyWidth?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
-declare const TQFP: () => react_jsx_runtime.JSX.Element;
+declare const TQFP: () => react.JSX.Element;
 
 /** Physical package dimensions in mm, independent of copper land dimensions.
  * Four equal lead rows surround the mold. Z=0 is the seating plane.
@@ -418,12 +418,12 @@ declare const LegacyLQFP: ({ pinCount, pitch, leadWidth, padContactLength, bodyW
     leadWidth?: number;
     padContactLength?: number;
     bodyWidth?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 /** leadSpanX selects explicit physical dimensions. Existing callers retain
  * their legacy geometry. See standard outline evidence in the fixtures.
  */
 type LQFPProps = Parameters<typeof LegacyLQFP>[0] | PhysicalLqfpDimensions;
-declare const LQFP: (props: LQFPProps) => react_jsx_runtime.JSX.Element;
+declare const LQFP: (props: LQFPProps) => react.JSX.Element;
 
 interface SOD123Props {
     /** Overall package length, including the leads, in millimeters. */
@@ -437,7 +437,7 @@ interface SOD123Props {
  * The defaults are the nominal dimensions from the Vishay 1N4148W package
  * drawing: https://www.vishay.com/docs/86356/1n4148w.pdf
  */
-declare const SOD123: ({ fullWidth, fullLength, }?: SOD123Props) => react_jsx_runtime.JSX.Element;
+declare const SOD123: ({ fullWidth, fullLength, }?: SOD123Props) => react.JSX.Element;
 
 declare const PinRow: ({ numberOfPins, pitch, longSidePinLength, invert, rows, smd, rightangle, }: {
     numberOfPins: number;
@@ -447,12 +447,12 @@ declare const PinRow: ({ numberOfPins, pitch, longSidePinLength, invert, rows, s
     rows?: number;
     smd?: boolean;
     rightangle?: boolean;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 interface AxialCapacitorProps {
     pitch: number;
 }
-declare const AxialCapacitor: ({ pitch }: AxialCapacitorProps) => react_jsx_runtime.JSX.Element;
+declare const AxialCapacitor: ({ pitch }: AxialCapacitorProps) => react.JSX.Element;
 
 declare const PinHeader: ({ x, y, pinThickness, shortSidePinLength, longSidePinLength, bodyHeight, bodyLength, bodyWidth, flipZ, smd, rightangle, }: {
     x: number;
@@ -466,7 +466,7 @@ declare const PinHeader: ({ x, y, pinThickness, shortSidePinLength, longSidePinL
     flipZ: (z: number) => number;
     smd?: boolean;
     rightangle?: boolean;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const FemaleHeader: ({ x, y, z, pitch, legsLength, innerDiameter, bodyHeight, bodyLength, bodyWidth, flipZ, }: {
     x: number;
@@ -479,7 +479,7 @@ declare const FemaleHeader: ({ x, y, z, pitch, legsLength, innerDiameter, bodyHe
     bodyLength?: number;
     bodyWidth?: number;
     flipZ: (z: number) => number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const FemaleHeaderRow: ({ numberOfPins, pitch, legsLength, innerDiameter, rows, invert, }: {
     numberOfPins: number;
@@ -489,21 +489,21 @@ declare const FemaleHeaderRow: ({ numberOfPins, pitch, legsLength, innerDiameter
     innerDiameter?: number;
     rows?: number;
     invert?: boolean;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
-declare const SOD523: () => react_jsx_runtime.JSX.Element;
+declare const SOD523: () => react.JSX.Element;
 
-declare const SOD723: () => react_jsx_runtime.JSX.Element;
+declare const SOD723: () => react.JSX.Element;
 
-declare const SOD882: () => react_jsx_runtime.JSX.Element;
+declare const SOD882: () => react.JSX.Element;
 
-declare const SMA: () => react_jsx_runtime.JSX.Element;
+declare const SMA: () => react.JSX.Element;
 
-declare const SMB: () => react_jsx_runtime.JSX.Element;
+declare const SMB: () => react.JSX.Element;
 
-declare const SMC: () => react_jsx_runtime.JSX.Element;
+declare const SMC: () => react.JSX.Element;
 
-declare const SMF: () => react_jsx_runtime.JSX.Element;
+declare const SMF: () => react.JSX.Element;
 
 /** Physical outline dimensions in mm, independent of a PCB land pattern. */
 interface FlatLeadDiodeDimensions {
@@ -533,11 +533,11 @@ interface FlatLeadDiodeDimensions {
  * geometry parameters, not new Footprinter tokens or manufacturer selectors.
  */
 type DO219ADProps = Partial<FlatLeadDiodeDimensions>;
-declare const DO219AD: (props: DO219ADProps) => react_jsx_runtime.JSX.Element;
+declare const DO219AD: (props: DO219ADProps) => react.JSX.Element;
 
-declare const SOD123F: () => react_jsx_runtime.JSX.Element;
+declare const SOD123F: () => react.JSX.Element;
 
-declare const SOD123FL: () => react_jsx_runtime.JSX.Element;
+declare const SOD123FL: () => react.JSX.Element;
 
 interface SOD123WProps {
     /** Body extent along the leads (X). */
@@ -558,15 +558,15 @@ interface SOD123WProps {
  * what makes it one package or another, so it must never be assumed. `sod110`
  * used these defaults for a while and rendered a body 24% too long.
  */
-declare const SOD123W: ({ bodyWidth, bodyLength, bodyHeight, }?: SOD123WProps) => react_jsx_runtime.JSX.Element;
+declare const SOD123W: ({ bodyWidth, bodyLength, bodyHeight, }?: SOD123WProps) => react.JSX.Element;
 
-declare const SOD128: () => react_jsx_runtime.JSX.Element;
+declare const SOD128: () => react.JSX.Element;
 
-declare const SOD323: () => react_jsx_runtime.JSX.Element;
+declare const SOD323: () => react.JSX.Element;
 
-declare const SOD323F: () => react_jsx_runtime.JSX.Element;
+declare const SOD323F: () => react.JSX.Element;
 
-declare const SOD323FL: () => react_jsx_runtime.JSX.Element;
+declare const SOD323FL: () => react.JSX.Element;
 
 /** SOD-323HE flat-lead outline with symmetric contacts by default.
  * Dimensional reference: https://www.es.co.th/Schemetic/PDF/RFU02VSM6S.PDF
@@ -577,9 +577,9 @@ declare const SOD323FL: () => react_jsx_runtime.JSX.Element;
  * geometry parameters, not new Footprinter tokens or manufacturer selectors.
  */
 type SOD323HEProps = Partial<FlatLeadDiodeDimensions>;
-declare const SOD323HE: (props: SOD323HEProps) => react_jsx_runtime.JSX.Element;
+declare const SOD323HE: (props: SOD323HEProps) => react.JSX.Element;
 
-declare const SOD923: () => react_jsx_runtime.JSX.Element;
+declare const SOD923: () => react.JSX.Element;
 
 interface SOT223Props {
     /** Pad-to-pad span across the leads (X). */
@@ -603,17 +603,17 @@ interface SOT223Props {
  * lead the other. Same construction, different dimensions, so the dimensions
  * are props — SOT-89's body is 4.5 x 2.5 x 1.5, barely a third of the volume.
  */
-declare const SOT223: ({ fullWidth, bodyWidth, bodyLength, bodyHeight, leadWidth, tabLeadWidth, padPitch, leadHeight, }?: SOT223Props) => react_jsx_runtime.JSX.Element;
+declare const SOT223: ({ fullWidth, bodyWidth, bodyLength, bodyHeight, leadWidth, tabLeadWidth, padPitch, leadHeight, }?: SOT223Props) => react.JSX.Element;
 
-declare const SOT457: () => react_jsx_runtime.JSX.Element;
+declare const SOT457: () => react.JSX.Element;
 
-declare const SOT323: () => react_jsx_runtime.JSX.Element;
+declare const SOT323: () => react.JSX.Element;
 
-declare const SOT363: () => react_jsx_runtime.JSX.Element;
+declare const SOT363: () => react.JSX.Element;
 
-declare const SOT886: () => react_jsx_runtime.JSX.Element;
+declare const SOT886: () => react.JSX.Element;
 
-declare const SOT963: () => react_jsx_runtime.JSX.Element;
+declare const SOT963: () => react.JSX.Element;
 
 /** Three-terminal SOT-89 / TO-243 / SC-62, in mm. Three flat leads at -X;
  * the middle terminal continues into the exposed die pad and rear tab at +X.
@@ -635,7 +635,7 @@ interface SOT89Props {
     rearExtension: number;
     taperInset: number;
 }
-declare function SOT89(p: SOT89Props): react_jsx_runtime.JSX.Element;
+declare function SOT89(p: SOT89Props): react.JSX.Element;
 
 interface MINIMELFProps {
     bodyLength?: number;
@@ -644,7 +644,7 @@ interface MINIMELFProps {
     contactColor?: string;
     bandColor?: string;
 }
-declare const MINIMELF: ({ bodyLength, bodyDiameter, color, contactColor, bandColor, }: MINIMELFProps) => react_jsx_runtime.JSX.Element;
+declare const MINIMELF: ({ bodyLength, bodyDiameter, color, contactColor, bandColor, }: MINIMELFProps) => react.JSX.Element;
 
 interface MELFProps {
     bodyLength?: number;
@@ -652,7 +652,7 @@ interface MELFProps {
     color?: string;
     contactColor?: string;
 }
-declare const MELF: ({ bodyLength, bodyDiameter, color, contactColor, }: MELFProps) => react_jsx_runtime.JSX.Element;
+declare const MELF: ({ bodyLength, bodyDiameter, color, contactColor, }: MELFProps) => react.JSX.Element;
 
 interface MicroMELFProps {
     bodyLength?: number;
@@ -661,7 +661,7 @@ interface MicroMELFProps {
     contactColor?: string;
     cathodeIdentification?: string;
 }
-declare const MicroMELF: ({ bodyLength, bodyDiameter, color, contactColor, cathodeIdentification, }: MicroMELFProps) => react_jsx_runtime.JSX.Element;
+declare const MicroMELF: ({ bodyLength, bodyDiameter, color, contactColor, cathodeIdentification, }: MicroMELFProps) => react.JSX.Element;
 
 interface HC49Props {
     /** overall body length (mm) */
@@ -683,21 +683,21 @@ interface HC49Props {
  * HC-49 (through-hole crystal) simplified 3D model.
  * Defaults chosen to match the HC-49/U-S recommended land pattern and dimensions.
  */
-declare const HC49: ({ bodyLength, bodyWidth, bodyHeight, leadSpacing, leadDiameter, leadLength, color, leadColor, }: HC49Props) => react_jsx_runtime.JSX.Element;
+declare const HC49: ({ bodyLength, bodyWidth, bodyHeight, leadSpacing, leadDiameter, leadLength, color, leadColor, }: HC49Props) => react.JSX.Element;
 
 declare const MS012: ({ pinCount, padContactLength, leadWidth, pitch, }: {
     pinCount: number;
     pitch?: number;
     leadWidth?: number;
     padContactLength?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const MS013: ({ pinCount, padContactLength, leadWidth, pitch, }: {
     pinCount?: number;
     pitch?: number;
     leadWidth?: number;
     padContactLength?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 interface TO220Lead {
     x: number;
@@ -742,7 +742,7 @@ interface TO220Props {
  * part that is 18mm over the board, and the holes met the leads at their tips
  * instead of just under the body.
  */
-declare const TO220: ({ mouldedTab, leads, bodyWidth, bodyThickness, bodyHeight, tabHeight, tabThickness, mountingHoleDiameter, standoff, leadLength, bodyColor, tabColor, leadColor, }?: TO220Props) => react_jsx_runtime.JSX.Element;
+declare const TO220: ({ mouldedTab, leads, bodyWidth, bodyThickness, bodyHeight, tabHeight, tabThickness, mountingHoleDiameter, standoff, leadLength, bodyColor, tabColor, leadColor, }?: TO220Props) => react.JSX.Element;
 
 interface TO92Lead {
     x: number;
@@ -786,7 +786,7 @@ interface TO92Props {
  * pattern, which measured 19.5mm end to end for a 4.5mm part and only lined up
  * with one of the three TO-92 footprints.
  */
-declare const TO92: ({ bodyDiameter, bodyHeight, flatCut, leads, standoff, leadLength, bodyColor, }?: TO92Props) => react_jsx_runtime.JSX.Element;
+declare const TO92: ({ bodyDiameter, bodyHeight, flatCut, leads, standoff, leadLength, bodyColor, }?: TO92Props) => react.JSX.Element;
 
 declare const MountedPcbModule: ({ numPins, rows, p, id, od, boardThickness, width, height, pinRowSide, holes, holeInset, pinRowHoleEdgeToEdgeDist, female, nopin, screen, screenWidth, screenHeight, screenCenterOffsetX, screenCenterOffsetY, }: {
     numPins?: number;
@@ -808,7 +808,7 @@ declare const MountedPcbModule: ({ numPins, rows, p, id, od, boardThickness, wid
     screenHeight?: number;
     screenCenterOffsetX?: number;
     screenCenterOffsetY?: number;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 interface ScreenProps {
     width?: number;
@@ -826,8 +826,8 @@ interface ScreenProps {
         z?: number;
     };
 }
-declare const Screen: ({ width, height, thickness, bezelInset, bezelDepth, screenColor, bezelColor, screenWidth, screenHeight, offset, }: ScreenProps) => react_jsx_runtime.JSX.Element;
-declare const Display: ({ width, height, thickness, bezelInset, bezelDepth, screenColor, bezelColor, screenWidth, screenHeight, offset, }: ScreenProps) => react_jsx_runtime.JSX.Element;
+declare const Screen: ({ width, height, thickness, bezelInset, bezelDepth, screenColor, bezelColor, screenWidth, screenHeight, offset, }: ScreenProps) => react.JSX.Element;
+declare const Display: ({ width, height, thickness, bezelInset, bezelDepth, screenColor, bezelColor, screenWidth, screenHeight, offset, }: ScreenProps) => react.JSX.Element;
 
 interface JSTZH1_5mmProps {
     numPins?: number;
@@ -836,7 +836,7 @@ interface JSTZH1_5mmProps {
     bodyColor?: string;
     pinColor?: string;
 }
-declare const JSTZH1_5mm: ({ numPins, showPins, showFootprint, bodyColor, pinColor, }: JSTZH1_5mmProps) => react_jsx_runtime.JSX.Element;
+declare const JSTZH1_5mm: ({ numPins, showPins, showFootprint, bodyColor, pinColor, }: JSTZH1_5mmProps) => react.JSX.Element;
 
 interface JSTPH2_0mmProps {
     numPins?: number;
@@ -845,7 +845,7 @@ interface JSTPH2_0mmProps {
     bodyColor?: string;
     pinColor?: string;
 }
-declare const JSTPH2_0mm: ({ numPins, showPins, showFootprint, bodyColor, pinColor, }: JSTPH2_0mmProps) => react_jsx_runtime.JSX.Element;
+declare const JSTPH2_0mm: ({ numPins, showPins, showFootprint, bodyColor, pinColor, }: JSTPH2_0mmProps) => react.JSX.Element;
 
 interface JSTXH2_5mmProps {
     numPins?: number;
@@ -854,14 +854,14 @@ interface JSTXH2_5mmProps {
     bodyColor?: string;
     pinColor?: string;
 }
-declare const JSTXH2_5mm: ({ numPins, showPins, showFootprint, bodyColor, pinColor, }: JSTXH2_5mmProps) => react_jsx_runtime.JSX.Element;
+declare const JSTXH2_5mm: ({ numPins, showPins, showFootprint, bodyColor, pinColor, }: JSTXH2_5mmProps) => react.JSX.Element;
 
 /** A generic pad fit is SH only when its pitch AND hold-down layout agree. */
 declare function isJstShFootprint(footprint: string): boolean;
 /** JST SH BMxxB-SRSS-TB top-entry header, nominal dimensions from JST eSH.pdf. */
 declare const JstSh: ({ footprint }: {
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 interface FPCProps {
     pinCount?: number;
@@ -879,14 +879,14 @@ interface FPCProps {
     mountPadWidth?: number;
     mountPadLength?: number;
 }
-declare const FPC: ({ pinCount, pitch, padWidth, padLength, staggered, reverse, rowPitch, topPadLength, bottomPadLength, mountPadPitchX, mountPadOffsetY, mountTop, mountPadWidth, mountPadLength, }: FPCProps) => react_jsx_runtime.JSX.Element;
+declare const FPC: ({ pinCount, pitch, padWidth, padLength, staggered, reverse, rowPitch, topPadLength, bottomPadLength, mountPadPitchX, mountPadOffsetY, mountTop, mountPadWidth, mountPadLength, }: FPCProps) => react.JSX.Element;
 
 interface Led5050Props {
     color?: string;
     bodyColor?: string;
     leadColor?: string;
 }
-declare const Led5050: ({ color, bodyColor, leadColor, }: Led5050Props) => react_jsx_runtime.JSX.Element;
+declare const Led5050: ({ color, bodyColor, leadColor, }: Led5050Props) => react.JSX.Element;
 
 interface RJ45Props {
     /** Width of the shielded connector body in millimetres. */
@@ -928,7 +928,7 @@ interface RJ45Props {
  * function so the model's signal, shield, locator and optional LED leads stay
  * aligned with the generated land pattern.
  */
-declare const RJ45: ({ bodyWidth, bodyDepth, bodyHeight, bodyCenterY, ledPins, firstPinLeft, firstPinTop, signalPitch, signalRowPitch, signalHoleDiameter, shieldPinX, shieldPinY, shieldHoleDiameter, locatorHoleX, locatorHoleY, locatorHoleDiameter, ledPinX, ledPinPitch, ledPinY, openingDirection, shellColor, housingColor, contactColor, }: RJ45Props) => react_jsx_runtime.JSX.Element;
+declare const RJ45: ({ bodyWidth, bodyDepth, bodyHeight, bodyCenterY, ledPins, firstPinLeft, firstPinTop, signalPitch, signalRowPitch, signalHoleDiameter, shieldPinX, shieldPinY, shieldHoleDiameter, locatorHoleX, locatorHoleY, locatorHoleDiameter, ledPinX, ledPinPitch, ledPinY, openingDirection, shellColor, housingColor, contactColor, }: RJ45Props) => react.JSX.Element;
 
 interface DPAKProps {
     /** X extent of the moulded body (the lead-to-tab axis) */
@@ -966,7 +966,7 @@ interface DPAKProps {
  * the origin. Getting that wrong moves a 4.4mm-tall part several millimetres,
  * which is exactly the error an enclosure clearance check cannot see.
  */
-declare const DPAK: ({ bodyWidth, bodyLength, bodyHeight, tabWidth, tabLength, span, pitch, leadWidth, leadContactLength, color, tabColor, leadColor, }: DPAKProps) => react_jsx_runtime.JSX.Element;
+declare const DPAK: ({ bodyWidth, bodyLength, bodyHeight, tabWidth, tabLength, span, pitch, leadWidth, leadContactLength, color, tabColor, leadColor, }: DPAKProps) => react.JSX.Element;
 
 /** Flat three-terminal TO-277A outline, in mm. The broad cathode is at +X;
  * two anode contacts are at -X. Body dimensions exclude the metal frame.
@@ -989,7 +989,7 @@ interface TO277Props {
     tabBarWidth: number;
     tabBarLength: number;
 }
-declare function TO277(p: TO277Props): react_jsx_runtime.JSX.Element;
+declare function TO277(p: TO277Props): react.JSX.Element;
 
 interface ElectrolyticCapacitorProps {
     /** Can diameter. footprinter reports this as `d` for `electrolytic`. */
@@ -1017,7 +1017,7 @@ interface ElectrolyticCapacitorProps {
  * Only the diameter and the lead pitch come from the footprint. The height is
  * derived, and deliberately generous — see `heightToDiameterRatio`.
  */
-declare const ElectrolyticCapacitor: ({ diameter, heightToDiameterRatio, height, leadPitch, leadDiameter, leadLength, sleeveColor, baseColor, }: ElectrolyticCapacitorProps) => react_jsx_runtime.JSX.Element;
+declare const ElectrolyticCapacitor: ({ diameter, heightToDiameterRatio, height, leadPitch, leadDiameter, leadLength, sleeveColor, baseColor, }: ElectrolyticCapacitorProps) => react.JSX.Element;
 
 interface Led2835Props {
     /** X extent of the package (footprinter reports 3.5 for `led2835`). */
@@ -1042,7 +1042,7 @@ interface Led2835Props {
  * gives `led2835` two DIFFERENT pad widths at two different offsets, so the body
  * is not centred on the pads.
  */
-declare const Led2835: ({ bodyWidth, bodyLength, bodyHeight, color, bodyColor, padColor, pad1X, pad1Width, pad2X, pad2Width, padLength, }?: Led2835Props) => react_jsx_runtime.JSX.Element;
+declare const Led2835: ({ bodyWidth, bodyLength, bodyHeight, color, bodyColor, padColor, pad1X, pad1Width, pad2X, pad2Width, padLength, }?: Led2835Props) => react.JSX.Element;
 
 interface PotentiometerLead {
     x: number;
@@ -1093,7 +1093,7 @@ interface PotentiometerProps {
  * which shadow core the same way). Renaming it would break that convention to
  * avoid a collision that cannot occur: nothing imports both.
  */
-declare const Potentiometer: ({ bodyWidth, bodyLength, bodyHeight, bodyCenterX, adjusterDiameter, shaftDiameter, shaftHeight, leads, leadDiameter, leadLength, bodyColor, adjusterColor, }: PotentiometerProps) => react_jsx_runtime.JSX.Element;
+declare const Potentiometer: ({ bodyWidth, bodyLength, bodyHeight, bodyCenterX, adjusterDiameter, shaftDiameter, shaftHeight, leads, leadDiameter, leadLength, bodyColor, adjusterColor, }: PotentiometerProps) => react.JSX.Element;
 
 interface SmdPushButtonProps {
     /** X extent of the moulded body. */
@@ -1125,13 +1125,13 @@ interface SmdPushButtonProps {
  * height an enclosure lid has to clear or press on, so it is separate from
  * `bodyHeight` rather than folded into it.
  */
-declare const SmdPushButton: ({ bodyWidth, bodyLength, bodyHeight, actuatorDiameter, actuatorHeight, padSpanX, padSpanY, padWidth, padLength, bodyColor, actuatorColor, leadColor, }: SmdPushButtonProps) => react_jsx_runtime.JSX.Element;
+declare const SmdPushButton: ({ bodyWidth, bodyLength, bodyHeight, actuatorDiameter, actuatorHeight, padSpanX, padSpanY, padWidth, padLength, bodyColor, actuatorColor, leadColor, }: SmdPushButtonProps) => react.JSX.Element;
 
 /** Low-profile side-actuated SPDT switch; MSK12C02 and MINI MSK12C02 outlines. */
 declare const SmdSlideSwitch: ({ footprint, position, }: {
     footprint?: string;
     position?: 0 | 1;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 interface SmdLeadPad {
     x: number;
@@ -1168,17 +1168,17 @@ interface GullWingBodyProps {
  * here uses (SOIC, SOT-235, SOT-223, MSOP, QFP, MS-012). Anything else is a
  * second kind of leg in a repo that already has one.
  */
-declare const GullWingBody: ({ bodyWidth, bodyLength, bodyHeight, pads, leadThickness, leadHeightRatio, }: GullWingBodyProps) => react_jsx_runtime.JSX.Element;
+declare const GullWingBody: ({ bodyWidth, bodyLength, bodyHeight, pads, leadThickness, leadHeightRatio, }: GullWingBodyProps) => react.JSX.Element;
 
 /** SOT143B nominal dimensions: Nexperia SOT143B package outline (mm). */
 declare const SOT143: ({ footprint }: {
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 /** USB2 Type-C receptacle: rounded open shell, tongue, contacts and four slot tabs. */
 declare const UsbCMidmount: ({ footprint, }: {
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const tantalumCases: {
     readonly A: readonly [3.2, 1.6, 1.6, 1.2, 0.8];
@@ -1191,7 +1191,7 @@ type TantalumCase = keyof typeof tantalumCases;
 declare const TantalumCapacitor: ({ caseSize, footprint, }: {
     caseSize?: TantalumCase;
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const twoPadCrystalPackages: {
     readonly FC135: readonly [3.2, 1.5, 0.9, 0.7];
@@ -1204,7 +1204,7 @@ type TwoPadCrystalPackage = keyof typeof twoPadCrystalPackages;
 declare const TwoPadCrystal: ({ packageName, footprint, }: {
     packageName?: TwoPadCrystalPackage;
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 /** Walsin RFANT5220110A0T outer geometry, L/W/T/A = 5.2/2/1.15/0.4 mm.
  * Source: ASC_RFANT5220110A0T_V15, page 2. Pad 1 is the feed end.
@@ -1212,7 +1212,7 @@ declare const TwoPadCrystal: ({ packageName, footprint, }: {
  */
 declare const CeramicChipAntenna: ({ footprint, }: {
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 declare const melfResistorSizes: {
     readonly "0102": readonly [2.2, 1.1, 0.4];
@@ -1224,7 +1224,7 @@ type MelfResistorSize = keyof typeof melfResistorSizes;
 declare const MelfResistor: ({ size, footprint, }: {
     size?: MelfResistorSize;
     footprint?: string;
-}) => react_jsx_runtime.JSX.Element;
+}) => react.JSX.Element;
 
 interface BallBearingMeshPart {
     name: string;
@@ -1253,7 +1253,31 @@ type BallBearingProps = BallBearingModelPropsInput & {
 };
 declare function createBallBearingGeom(input?: BallBearingModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 /** Separately colored physical parts retain their individual closed surfaces. */
-declare function BallBearing({ color, ...props }: BallBearingProps): react_jsx_runtime.JSX.Element;
+declare function BallBearing({ color, ...props }: BallBearingProps): react.JSX.Element;
+
+type BallTransferUnitProps = BallTransferUnitModelPropsInput & {
+    color?: string;
+};
+declare function createBallTransferUnitGeom(input?: BallTransferUnitModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function BallTransferUnit({ color, ...props }: BallTransferUnitProps): react.JSX.Element;
+
+type Mesh = {
+    positions: number[];
+    indices: number[];
+};
+interface BallTransferUnitMeshPart {
+    name: "housing" | "load ball";
+    color: string;
+    mesh: Mesh;
+}
+interface BallTransferUnitMesh extends Mesh {
+    parts: BallTransferUnitMeshPart[];
+}
+/** Millimeters; body bottom at Z=0, circular mounting flange at the cup mouth.
+ * The load ball and the perforated cup are independently closed physical parts.
+ * Internal recirculation details are nominally represented by the socket.
+ */
+declare function createBallTransferUnitMesh(input?: BallTransferUnitModelPropsInput): BallTransferUnitMesh;
 
 /** Indexed counterclockwise triangles in millimeters. */
 interface ButtonScrewMesh {
@@ -1272,7 +1296,7 @@ type ButtonScrewProps = ButtonScrewModelPropsInput & {
     color?: string;
 };
 declare function createButtonScrewGeom(input: ButtonScrewModelPropsInput, resolution?: ButtonScrewMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function ButtonScrew({ color, ...props }: ButtonScrewProps): react_jsx_runtime.JSX.Element;
+declare function ButtonScrew({ color, ...props }: ButtonScrewProps): react.JSX.Element;
 
 interface CableGrommetMesh {
     positions: number[];
@@ -1289,7 +1313,7 @@ type CableGrommetProps = CableGrommetModelPropsInput & {
     color?: string;
 };
 declare function createCableGrommetGeom(input: CableGrommetModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function CableGrommet({ color, ...props }: CableGrommetProps): react_jsx_runtime.JSX.Element;
+declare function CableGrommet({ color, ...props }: CableGrommetProps): react.JSX.Element;
 
 type ShaftMountMesh = {
     positions: number[];
@@ -1305,7 +1329,7 @@ type ClampingShaftCollarProps = ClampingShaftCollarModelPropsInput & {
 };
 /** Datum and mounting-hole coordinates follow the modelprinter contract. */
 declare function createClampingShaftCollarGeom(input: ClampingShaftCollarModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function ClampingShaftCollar({ color, ...props }: ClampingShaftCollarProps): react_jsx_runtime.JSX.Element;
+declare function ClampingShaftCollar({ color, ...props }: ClampingShaftCollarProps): react.JSX.Element;
 
 interface CompressionSpringMesh {
     positions: number[];
@@ -1322,7 +1346,7 @@ type CompressionSpringProps = CompressionSpringModelPropsInput & {
     color?: string;
 };
 declare function createCompressionSpringGeom(input: CompressionSpringModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function CompressionSpring({ color, ...props }: CompressionSpringProps): react_jsx_runtime.JSX.Element;
+declare function CompressionSpring({ color, ...props }: CompressionSpringProps): react.JSX.Element;
 
 /** Shared ring vertices and outward counterclockwise triangles, in millimeters. */
 interface FlangedBushingMesh {
@@ -1337,7 +1361,7 @@ type FlangedBushingProps = FlangedBushingModelPropsInput & {
 };
 /** Square integral flange at the Z=0 end; bore continues through overall length. */
 declare function createFlangedBushingGeom(input: FlangedBushingModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function FlangedBushing({ color, ...props }: FlangedBushingProps): react_jsx_runtime.JSX.Element;
+declare function FlangedBushing({ color, ...props }: FlangedBushingProps): react.JSX.Element;
 
 interface FlatHeadScrewMeshOptions {
     radialSegments?: number;
@@ -1354,7 +1378,7 @@ type FlatHeadScrewProps = FlatHeadScrewModelPropsInput & {
     color?: string;
 };
 declare function createFlatHeadScrewGeom(input: FlatHeadScrewModelPropsInput, options?: FlatHeadScrewMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function FlatHeadScrew({ color, ...props }: FlatHeadScrewProps): react_jsx_runtime.JSX.Element;
+declare function FlatHeadScrew({ color, ...props }: FlatHeadScrewProps): react.JSX.Element;
 
 type Rotation3 = [number | string, number | string, number | string];
 type FlexScreenOrientation = "sitsFlat" | "sitsFlatBelowBoard" | "foldedToFaceAboveBoard" | "foldedToFaceBelowBoard" | "foldedToRightAngleAboveBoard" | "foldedToRightAngleBelowBoard";
@@ -1476,7 +1500,7 @@ interface ResolvedFlexScreenSize {
     aspectRatio: number;
 }
 declare const resolveFlexScreenSize: ({ width, height, diagonal, aspectRatio, ratio, defaultDiagonal, }: Pick<FlexScreenProps, "width" | "height" | "diagonal" | "aspectRatio" | "ratio" | "defaultDiagonal">) => ResolvedFlexScreenSize;
-declare const FlexScreen: (props: FlexScreenProps) => react_jsx_runtime.JSX.Element;
+declare const FlexScreen: (props: FlexScreenProps) => react.JSX.Element;
 
 /** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
 interface SpurGearMesh {
@@ -1505,7 +1529,7 @@ type HelicalGearProps = HelicalGearModelPropsInput & {
 };
 /** Axis +Z, lower face Z=0; optional hub extends above the gear face. */
 declare function createHelicalGearGeom(input: HelicalGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function HelicalGear({ color, ...props }: HelicalGearProps): react_jsx_runtime.JSX.Element;
+declare function HelicalGear({ color, ...props }: HelicalGearProps): react.JSX.Element;
 
 interface HexBoltMeshOptions {
     radialSegments?: number;
@@ -1522,7 +1546,7 @@ type HexBoltProps = HexBoltModelPropsInput & {
     color?: string;
 };
 declare function createHexBoltGeom(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function HexBolt({ color, ...props }: HexBoltProps): react_jsx_runtime.JSX.Element;
+declare function HexBolt({ color, ...props }: HexBoltProps): react.JSX.Element;
 
 /** Indexed counterclockwise triangles in millimeters. */
 interface HexNutMesh {
@@ -1541,7 +1565,7 @@ type HexNutProps = HexNutModelPropsInput & {
     color?: string;
 };
 declare function createHexNutGeom(input: HexNutModelPropsInput, resolution?: HexNutMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function HexNut({ color, ...props }: HexNutProps): react_jsx_runtime.JSX.Element;
+declare function HexNut({ color, ...props }: HexNutProps): react.JSX.Element;
 
 /** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
 interface HexSocketBoltMesh {
@@ -1561,7 +1585,7 @@ type HexSocketBoltProps = HexSocketBoltModelPropsInput & {
 };
 /** Bearing plane Z=0, tip along -Z, head along +Z. Threads are approximate. */
 declare function createHexSocketBoltGeom(input: HexSocketBoltModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function HexSocketBolt({ color, ...props }: HexSocketBoltProps): react_jsx_runtime.JSX.Element;
+declare function HexSocketBolt({ color, ...props }: HexSocketBoltProps): react.JSX.Element;
 
 interface HollowPositioningArmTubeMesh {
     positions: number[];
@@ -1578,7 +1602,7 @@ type HollowPositioningArmTubeProps = HollowPositioningArmTubeModelPropsInput & {
     color?: string;
 };
 declare function createHollowPositioningArmTubeGeom(input: HollowPositioningArmTubeModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function HollowPositioningArmTube({ color, ...props }: HollowPositioningArmTubeProps): react_jsx_runtime.JSX.Element;
+declare function HollowPositioningArmTube({ color, ...props }: HollowPositioningArmTubeProps): react.JSX.Element;
 
 type NemaMotorProps = NemaMotorModelPropsInput & {
     bodyColor?: string;
@@ -1590,10 +1614,10 @@ type NemaFrameMotorProps = Omit<NemaMotorProps, "nemaSize">;
 /** Mounting face at Z=0, body along -Z, shaft along +Z; all lengths in mm.
  * Parameters follow the modelprinter NEMA contract; JSCAD builds all geometry.
  */
-declare function NemaMotor({ bodyColor, capColor, shaftColor, screwColor, ...props }: NemaMotorProps): react_jsx_runtime.JSX.Element;
-declare const NEMA8: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
-declare const NEMA17: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
-declare const NEMA23: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+declare function NemaMotor({ bodyColor, capColor, shaftColor, screwColor, ...props }: NemaMotorProps): react.JSX.Element;
+declare const NEMA8: (props: NemaFrameMotorProps) => react.JSX.Element;
+declare const NEMA17: (props: NemaFrameMotorProps) => react.JSX.Element;
+declare const NEMA23: (props: NemaFrameMotorProps) => react.JSX.Element;
 
 interface PanScrewMeshOptions {
     radialSegments?: number;
@@ -1610,7 +1634,7 @@ type PanScrewProps = PanScrewModelPropsInput & {
     color?: string;
 };
 declare function createPanScrewGeom(input: PanScrewModelPropsInput, options?: PanScrewMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function PanScrew({ color, ...props }: PanScrewProps): react_jsx_runtime.JSX.Element;
+declare function PanScrew({ color, ...props }: PanScrewProps): react.JSX.Element;
 
 /** Shared ring vertices and outward counterclockwise triangles, in millimeters. */
 interface PlainBushingMesh {
@@ -1625,7 +1649,7 @@ type PlainBushingProps = PlainBushingModelPropsInput & {
 };
 /** Through sleeve from Z=0 to length, with four optional 45-degree rim chamfers. */
 declare function createPlainBushingGeom(input: PlainBushingModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function PlainBushing({ color, ...props }: PlainBushingProps): react_jsx_runtime.JSX.Element;
+declare function PlainBushing({ color, ...props }: PlainBushingProps): react.JSX.Element;
 
 type RigidCouplerMesh = ShaftMountMesh;
 /** Geometry is driven by the corresponding modelprinter schema and hole layout. */
@@ -1636,7 +1660,7 @@ type RigidCouplerProps = RigidCouplerModelPropsInput & {
 };
 /** Datum and mounting-hole coordinates follow the modelprinter contract. */
 declare function createRigidCouplerGeom(input: RigidCouplerModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function RigidCoupler({ color, ...props }: RigidCouplerProps): react_jsx_runtime.JSX.Element;
+declare function RigidCoupler({ color, ...props }: RigidCouplerProps): react.JSX.Element;
 
 type ShaftCollarMesh = ShaftMountMesh;
 /** Geometry is driven by the corresponding modelprinter schema and hole layout. */
@@ -1647,7 +1671,7 @@ type ShaftCollarProps = ShaftCollarModelPropsInput & {
 };
 /** Datum and mounting-hole coordinates follow the modelprinter contract. */
 declare function createShaftCollarGeom(input: ShaftCollarModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function ShaftCollar({ color, ...props }: ShaftCollarProps): react_jsx_runtime.JSX.Element;
+declare function ShaftCollar({ color, ...props }: ShaftCollarProps): react.JSX.Element;
 
 interface SheetMetalMesh {
     positions: number[];
@@ -1666,14 +1690,14 @@ type SheetMetalProps = SheetMetalModelPropsInput & {
 };
 /** Base midsurface Z=0; bends and flanges rise along +Z. Dimensions in mm. */
 declare function createSheetMetalGeom(input: SheetMetalModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function SheetMetal({ color, ...props }: SheetMetalProps): react_jsx_runtime.JSX.Element;
+declare function SheetMetal({ color, ...props }: SheetMetalProps): react.JSX.Element;
 
 type SpurGearProps = SpurGearModelPropsInput & {
     color?: string;
 };
 /** Axis +Z, lower face Z=0; optional hub extends above the gear face. */
 declare function createSpurGearGeom(input: SpurGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function SpurGear({ color, ...props }: SpurGearProps): react_jsx_runtime.JSX.Element;
+declare function SpurGear({ color, ...props }: SpurGearProps): react.JSX.Element;
 
 /** Indexed counterclockwise triangles in millimeters. */
 interface ThreadedRodMesh {
@@ -1692,7 +1716,7 @@ type ThreadedRodProps = ThreadedRodModelPropsInput & {
     color?: string;
 };
 declare function createThreadedRodGeom(input: ThreadedRodModelPropsInput, resolution?: ThreadedRodMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function ThreadedRod({ color, ...props }: ThreadedRodProps): react_jsx_runtime.JSX.Element;
+declare function ThreadedRod({ color, ...props }: ThreadedRodProps): react.JSX.Element;
 
 interface TorsionSpringMesh {
     positions: number[];
@@ -1709,7 +1733,7 @@ type TorsionSpringProps = TorsionSpringModelPropsInput & {
     color?: string;
 };
 declare function createTorsionSpringGeom(input: TorsionSpringModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function TorsionSpring({ color, ...props }: TorsionSpringProps): react_jsx_runtime.JSX.Element;
+declare function TorsionSpring({ color, ...props }: TorsionSpringProps): react.JSX.Element;
 
 interface TSlotExtrusionMesh {
     positions: number[];
@@ -1724,7 +1748,7 @@ type TSlotExtrusionProps = TSlotExtrusionModelPropsInput & {
     color?: string;
 };
 declare function createTSlotExtrusionGeom(input?: TSlotExtrusionModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function TSlotExtrusion({ color, ...props }: TSlotExtrusionProps): react_jsx_runtime.JSX.Element;
+declare function TSlotExtrusion({ color, ...props }: TSlotExtrusionProps): react.JSX.Element;
 
 interface TSlotGussetMesh {
     positions: number[];
@@ -1739,7 +1763,7 @@ type TSlotGussetProps = TSlotGussetModelPropsInput & {
     color?: string;
 };
 declare function createTSlotGussetGeom(input?: TSlotGussetModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function TSlotGusset({ color, ...props }: TSlotGussetProps): react_jsx_runtime.JSX.Element;
+declare function TSlotGusset({ color, ...props }: TSlotGussetProps): react.JSX.Element;
 
 interface TSlotInsideCornerMesh {
     positions: number[];
@@ -1754,7 +1778,7 @@ type TSlotInsideCornerProps = TSlotInsideCornerModelPropsInput & {
     color?: string;
 };
 declare function createTSlotInsideCornerGeom(input?: TSlotInsideCornerModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function TSlotInsideCorner({ color, ...props }: TSlotInsideCornerProps): react_jsx_runtime.JSX.Element;
+declare function TSlotInsideCorner({ color, ...props }: TSlotInsideCornerProps): react.JSX.Element;
 
 /** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
 interface WormGearMesh {
@@ -1774,6 +1798,6 @@ type WormGearProps = WormGearModelPropsInput & {
 };
 /** Square-cut worm along +Z, from Z=0 to length. Threads are approximate. */
 declare function createWormGearGeom(input: WormGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function WormGear({ color, ...props }: WormGearProps): react_jsx_runtime.JSX.Element;
+declare function WormGear({ color, ...props }: WormGearProps): react.JSX.Element;
 
-export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, BallBearing, type BallBearingMesh, type BallBearingMeshOptions, type BallBearingMeshPart, type BallBearingProps, ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, CeramicChipAntenna, ChipBody, type ChipBodyProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, HollowPositioningArmTube, type HollowPositioningArmTubeMesh, type HollowPositioningArmTubeMeshOptions, type HollowPositioningArmTubeProps, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LGA, type LGAProps, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PinHeader, PinRow, PlainBushing, type PlainBushingMesh, type PlainBushingProps, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, RigidCoupler, type RigidCouplerMesh, type RigidCouplerProps, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT89, type SOT89Props, SOT963, SSOP, type SSOPProps, Screen, type ScreenProps, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SmdChipLead, type SmdChipLeadProps, SmdLED, type SmdLeadPad, type SmdLedSize, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, SpurGear, type SpurGearMesh, type SpurGearProps, StampBoard, TO220, type TO220Lead, type TO220Props, TO277, type TO277Props, TO92, type TO92Lead, type TO92Props, TQFP, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, TantalumCapacitor, type TantalumCase, ThreadedRod, type ThreadedRodMesh, type ThreadedRodMeshOptions, type ThreadedRodProps, TorsionSpring, type TorsionSpringMesh, type TorsionSpringMeshOptions, type TorsionSpringProps, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, WormGear, type WormGearMesh, type WormGearProps, createBallBearingGeom, createBallBearingMesh, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createHollowPositioningArmTubeGeom, createHollowPositioningArmTubeMesh, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createRigidCouplerGeom, createRigidCouplerMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createThreadedRodGeom, createThreadedRodMesh, createTorsionSpringGeom, createTorsionSpringMesh, createWormGearGeom, createWormGearMesh, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, smdLedDimensions, tantalumCases, twoPadCrystalPackages };
+export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, BallBearing, type BallBearingMesh, type BallBearingMeshOptions, type BallBearingMeshPart, type BallBearingProps, BallTransferUnit, type BallTransferUnitMesh, type BallTransferUnitMeshPart, type BallTransferUnitProps, ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, CeramicChipAntenna, ChipBody, type ChipBodyProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, HollowPositioningArmTube, type HollowPositioningArmTubeMesh, type HollowPositioningArmTubeMeshOptions, type HollowPositioningArmTubeProps, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LGA, type LGAProps, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PinHeader, PinRow, PlainBushing, type PlainBushingMesh, type PlainBushingProps, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, RigidCoupler, type RigidCouplerMesh, type RigidCouplerProps, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT89, type SOT89Props, SOT963, SSOP, type SSOPProps, Screen, type ScreenProps, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SmdChipLead, type SmdChipLeadProps, SmdLED, type SmdLeadPad, type SmdLedSize, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, SpurGear, type SpurGearMesh, type SpurGearProps, StampBoard, TO220, type TO220Lead, type TO220Props, TO277, type TO277Props, TO92, type TO92Lead, type TO92Props, TQFP, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, TantalumCapacitor, type TantalumCase, ThreadedRod, type ThreadedRodMesh, type ThreadedRodMeshOptions, type ThreadedRodProps, TorsionSpring, type TorsionSpringMesh, type TorsionSpringMeshOptions, type TorsionSpringProps, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, WormGear, type WormGearMesh, type WormGearProps, createBallBearingGeom, createBallBearingMesh, createBallTransferUnitGeom, createBallTransferUnitMesh, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createHollowPositioningArmTubeGeom, createHollowPositioningArmTubeMesh, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createRigidCouplerGeom, createRigidCouplerMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createThreadedRodGeom, createThreadedRodMesh, createTorsionSpringGeom, createTorsionSpringMesh, createWormGearGeom, createWormGearMesh, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, smdLedDimensions, tantalumCases, twoPadCrystalPackages };