jscad-electronics 0.0.207 → 0.0.208

package/dist/vanilla.d.ts

@@ -3,7 +3,7 @@ import { BufferGeometry } from 'three';
 import * as jscadModeling from '@jscad/modeling';
 import * as react_jsx_runtime from 'react/jsx-runtime';
 import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
-import { ButtonScrewModelPropsInput, CableGrommetModelPropsInput, ClampingShaftCollarModelPropsInput, CompressionSpringModelPropsInput, FlangedBushingModelPropsInput, FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexNutModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, ShaftCollarModelPropsInput, SheetMetalModelPropsInput, TSlotExtrusionModelPropsInput, TSlotGussetModelPropsInput, TSlotInsideCornerModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
+import { ButtonScrewModelPropsInput, CableGrommetModelPropsInput, ClampingShaftCollarModelPropsInput, CompressionSpringModelPropsInput, FlangedBushingModelPropsInput, FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexNutModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, RigidCouplerModelPropsInput, ShaftCollarModelPropsInput, SheetMetalModelPropsInput, TSlotExtrusionModelPropsInput, TSlotGussetModelPropsInput, TSlotInsideCornerModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
 
 type VNode = {
     type: any;
@@ -259,6 +259,17 @@ type PlainBushingProps = PlainBushingModelPropsInput & {
 declare function createPlainBushingGeom(input: PlainBushingModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function PlainBushing({ color, ...props }: PlainBushingProps): react_jsx_runtime.JSX.Element;
 
+type RigidCouplerMesh = ShaftMountMesh;
+/** Geometry is driven by the corresponding modelprinter schema and hole layout. */
+declare function createRigidCouplerMesh(input: RigidCouplerModelPropsInput): RigidCouplerMesh;
+
+type RigidCouplerProps = RigidCouplerModelPropsInput & {
+    color?: string;
+};
+/** Datum and mounting-hole coordinates follow the modelprinter contract. */
+declare function createRigidCouplerGeom(input: RigidCouplerModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function RigidCoupler({ color, ...props }: RigidCouplerProps): react_jsx_runtime.JSX.Element;
+
 type ShaftCollarMesh = ShaftMountMesh;
 /** Geometry is driven by the corresponding modelprinter schema and hole layout. */
 declare function createShaftCollarMesh(input: ShaftCollarModelPropsInput): ShaftCollarMesh;
@@ -369,4 +380,4 @@ declare function createJSCADRenderer(jscad: typeof jscadModeling): {
     };
 };
 
-export { ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, type ColoredGeom, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, Fragment, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PlainBushing, type PlainBushingMesh, type PlainBushingProps, type RenderResult, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SpurGear, type SpurGearMesh, type SpurGearProps, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, type VNode, WormGear, type WormGearMesh, type WormGearProps, convertCSGToThreeGeom, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createJSCADRenderer, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createWormGearGeom, createWormGearMesh, getJscadModelForFootprint, getJscadModelForFootprintWithPads, h };
+export { ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, ClampingShaftCollar, type ClampingShaftCollarMesh, type ClampingShaftCollarProps, type ColoredGeom, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, Fragment, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PlainBushing, type PlainBushingMesh, type PlainBushingProps, type RenderResult, RigidCoupler, type RigidCouplerMesh, type RigidCouplerProps, ShaftCollar, type ShaftCollarMesh, type ShaftCollarProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SpurGear, type SpurGearMesh, type SpurGearProps, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, type VNode, WormGear, type WormGearMesh, type WormGearProps, convertCSGToThreeGeom, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createClampingShaftCollarGeom, createClampingShaftCollarMesh, createCompressionSpringGeom, createCompressionSpringMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createJSCADRenderer, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createRigidCouplerGeom, createRigidCouplerMesh, createShaftCollarGeom, createShaftCollarMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createWormGearGeom, createWormGearMesh, getJscadModelForFootprint, getJscadModelForFootprintWithPads, h };

package/dist/vanilla.js

@@ -183,24 +183,24 @@ var FootprintPlatedHole = ({
 import { buttonScrewModelDefinitionSchema } from "@tscircuit/modelprinter";
 
 // lib/model-registry.ts
-function defineModelRenderer(model22) {
-  return model22;
+function defineModelRenderer(model23) {
+  return model23;
 }
 var ModelRendererRegistry = class {
   models = /* @__PURE__ */ new Map();
-  register(model22) {
-    if (typeof model22.name !== "string" || !/^[a-z]+$/.test(model22.name)) {
+  register(model23) {
+    if (typeof model23.name !== "string" || !/^[a-z]+$/.test(model23.name)) {
       throw new Error(
         "Model renderer names must contain only lowercase letters"
       );
     }
-    if (this.models.has(model22.name)) {
-      throw new Error(`Model renderer "${model22.name}" is already registered`);
+    if (this.models.has(model23.name)) {
+      throw new Error(`Model renderer "${model23.name}" is already registered`);
     }
-    if (model22.pads !== "none" && model22.pads !== "footprinter") {
+    if (model23.pads !== "none" && model23.pads !== "footprinter") {
       throw new Error('Model renderer pads must be "none" or "footprinter"');
     }
-    const { name, schema, render: render2, pads } = model22;
+    const { name, schema, render: render2, pads } = model23;
     this.models.set(name, {
       name,
       schema,
@@ -3038,6 +3038,57 @@ function register14(registry) {
   registry.register(model14);
 }
 
+// lib/models/rigidcoupler/register.tsx
+import { rigidCouplerModelDefinitionSchema } from "@tscircuit/modelprinter";
+
+// lib/models/rigidcoupler/mesh.ts
+import "@jscad/modeling";
+import {
+  rigidCouplerModelPropsSchema,
+  getRigidCouplerDimensions
+} from "@tscircuit/modelprinter";
+function createRigidCouplerMesh(input) {
+  const props = rigidCouplerModelPropsSchema.parse(input);
+  const dimensions = getRigidCouplerDimensions(props);
+  assertShaftMountResolution(dimensions.screwHoles);
+  const body = createAnnularSleeve({
+    outerRadius: props.outerDiameter / 2,
+    boreARadius: props.boreDiameter / 2,
+    boreBRadius: props.boreBDiameter / 2,
+    length: props.length,
+    chamfer: props.chamfer,
+    stepZ: dimensions.boreADepth
+  });
+  return finishShaftMountMesh(
+    subtractShaftMountParts(
+      body,
+      ...dimensions.screwHoles.map(createMountingHoleCutter)
+    )
+  );
+}
+
+// lib/models/rigidcoupler/RigidCoupler.tsx
+function createRigidCouplerGeom(input) {
+  return indexedMeshToGeom3(createRigidCouplerMesh(input));
+}
+function RigidCoupler({
+  color = "#737e8f",
+  ...props
+}) {
+  return /* @__PURE__ */ jsx(Colorize, { color, children: /* @__PURE__ */ jsx(Custom, { geometry: createRigidCouplerGeom(props) }) });
+}
+
+// lib/models/rigidcoupler/register.tsx
+var model15 = defineModelRenderer({
+  name: "rigidcoupler",
+  schema: rigidCouplerModelDefinitionSchema,
+  render: ({ fn, ...props }) => /* @__PURE__ */ jsx(RigidCoupler, { ...props }),
+  pads: "none"
+});
+function register15(registry) {
+  registry.register(model15);
+}
+
 // lib/models/shaftcollar/register.tsx
 import { shaftCollarModelDefinitionSchema } from "@tscircuit/modelprinter";
 
@@ -3074,14 +3125,14 @@ function ShaftCollar({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/shaftcollar/register.tsx
-var model15 = defineModelRenderer({
+var model16 = defineModelRenderer({
   name: "shaftcollar",
   schema: shaftCollarModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(ShaftCollar, { ...props }),
   pads: "none"
 });
-function register15(registry) {
-  registry.register(model15);
+function register16(registry) {
+  registry.register(model16);
 }
 
 // lib/models/sheetmetal/register.tsx
@@ -3241,14 +3292,14 @@ function SheetMetal({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/sheetmetal/register.tsx
-var model16 = defineModelRenderer({
+var model17 = defineModelRenderer({
   name: "sheetmetal",
   schema: sheetMetalModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(SheetMetal, { ...props }),
   pads: "none"
 });
-function register16(registry) {
-  registry.register(model16);
+function register17(registry) {
+  registry.register(model17);
 }
 
 // lib/models/spurgear/register.tsx
@@ -3263,14 +3314,14 @@ function SpurGear({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/spurgear/register.tsx
-var model17 = defineModelRenderer({
+var model18 = defineModelRenderer({
   name: "spurgear",
   schema: spurGearModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(SpurGear, { ...props }),
   pads: "none"
 });
-function register17(registry) {
-  registry.register(model17);
+function register18(registry) {
+  registry.register(model18);
 }
 
 // lib/models/tslotextrusion/register.tsx
@@ -3420,14 +3471,14 @@ function TSlotExtrusion({
 }
 
 // lib/models/tslotextrusion/register.tsx
-var model18 = defineModelRenderer({
+var model19 = defineModelRenderer({
   name: "tslotextrusion",
   schema: tSlotExtrusionModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(TSlotExtrusion, { ...props }),
   pads: "none"
 });
-function register18(registry) {
-  registry.register(model18);
+function register19(registry) {
+  registry.register(model19);
 }
 
 // lib/models/tslotgusset/register.tsx
@@ -3480,14 +3531,14 @@ function TSlotGusset({ color = "#8995a3", ...props }) {
 }
 
 // lib/models/tslotgusset/register.tsx
-var model19 = defineModelRenderer({
+var model20 = defineModelRenderer({
   name: "tslotgusset",
   schema: tSlotGussetModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(TSlotGusset, { ...props }),
   pads: "none"
 });
-function register19(registry) {
-  registry.register(model19);
+function register20(registry) {
+  registry.register(model20);
 }
 
 // lib/models/tslotinsidecorner/register.tsx
@@ -3567,14 +3618,14 @@ function TSlotInsideCorner({
 }
 
 // lib/models/tslotinsidecorner/register.tsx
-var model20 = defineModelRenderer({
+var model21 = defineModelRenderer({
   name: "tslotinsidecorner",
   schema: tSlotInsideCornerModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(TSlotInsideCorner, { ...props }),
   pads: "none"
 });
-function register20(registry) {
-  registry.register(model20);
+function register21(registry) {
+  registry.register(model21);
 }
 
 // lib/models/wormgear/register.tsx
@@ -3766,14 +3817,14 @@ function WormGear({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/wormgear/register.tsx
-var model21 = defineModelRenderer({
+var model22 = defineModelRenderer({
   name: "wormgear",
   schema: wormGearModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(WormGear, { ...props }),
   pads: "none"
 });
-function register21(registry) {
-  registry.register(model21);
+function register22(registry) {
+  registry.register(model22);
 }
 
 // lib/generated/model-renderers.ts
@@ -3799,6 +3850,7 @@ function registerAllModelRenderers(registry) {
   register19(registry);
   register20(registry);
   register21(registry);
+  register22(registry);
 }
 
 // lib/default-model-registry.ts
@@ -11355,10 +11407,10 @@ var SOT143 = ({ footprint = "sot143" }) => {
 var Footprinter3d = ({ footprint }) => {
   const modelFn = mp3.string(footprint.split("_", 1)[0]).params().fn;
   if (mp3.getModelNames().includes(modelFn)) {
-    const model22 = mp3.string(footprint).json();
-    const renderer = modelRendererRegistry.get(model22.fn);
+    const model23 = mp3.string(footprint).json();
+    const renderer = modelRendererRegistry.get(model23.fn);
     if (renderer) {
-      return renderer.render(model22);
+      return renderer.render(model23);
     }
   }
   let normalizedFootprint = footprint;
@@ -12191,8 +12243,8 @@ function renderNode(node, colorCtx, renderCtx) {
   }
   return (children ?? []).flatMap((c) => renderNode(c, colorCtx, renderCtx));
 }
-function render(root, jscad7) {
-  const geometries = renderNode(root, void 0, { jscad: jscad7 });
+function render(root, jscad8) {
+  const geometries = renderNode(root, void 0, { jscad: jscad8 });
   return {
     geometries: geometries.map(
       (entry) => entry.material ? { ...entry, geom: { ...entry.geom, material: entry.material } } : entry
@@ -12284,24 +12336,24 @@ function convertCSGToThreeGeom(csg) {
 }
 
 // lib/vanilla/index.ts
-function getJscadModelForFootprint(footprint, jscad7) {
+function getJscadModelForFootprint(footprint, jscad8) {
   const vnode = h(Footprinter3d, { footprint });
-  return render(vnode, jscad7);
+  return render(vnode, jscad8);
 }
-function getJscadModelForFootprintWithPads(footprint, jscad7) {
+function getJscadModelForFootprintWithPads(footprint, jscad8) {
   const vnode = h(
     Fragment,
     {},
     h(Footprinter3d, { footprint }),
     h(ExtrudedPads, { footprint })
   );
-  return render(vnode, jscad7);
+  return render(vnode, jscad8);
 }
-function createJSCADRenderer(jscad7) {
+function createJSCADRenderer(jscad8) {
   function createJSCADRoot(container) {
     return {
       render(element) {
-        const { geometries } = render(element, jscad7);
+        const { geometries } = render(element, jscad8);
         container.splice(0, container.length, ...geometries);
       }
     };
@@ -12326,6 +12378,7 @@ export {
   NemaMotor,
   PanScrew,
   PlainBushing,
+  RigidCoupler,
   ShaftCollar,
   SheetMetal,
   SpurGear,
@@ -12359,6 +12412,8 @@ export {
   createPanScrewMesh,
   createPlainBushingGeom,
   createPlainBushingMesh,
+  createRigidCouplerGeom,
+  createRigidCouplerMesh,
   createShaftCollarGeom,
   createShaftCollarMesh,
   createSheetMetalGeom,