jscad-electronics 0.0.203 → 0.0.205

package/dist/vanilla.d.ts

@@ -3,7 +3,7 @@ import { BufferGeometry } from 'three';
 import * as jscadModeling from '@jscad/modeling';
 import * as react_jsx_runtime from 'react/jsx-runtime';
 import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
-import { ButtonScrewModelPropsInput, CableGrommetModelPropsInput, CompressionSpringModelPropsInput, FlangedBushingModelPropsInput, FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexNutModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, SheetMetalModelPropsInput, TSlotExtrusionModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
+import { ButtonScrewModelPropsInput, CableGrommetModelPropsInput, CompressionSpringModelPropsInput, FlangedBushingModelPropsInput, FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexNutModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, SheetMetalModelPropsInput, TSlotExtrusionModelPropsInput, TSlotGussetModelPropsInput, TSlotInsideCornerModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
 
 type VNode = {
     type: any;
@@ -284,6 +284,36 @@ type TSlotExtrusionProps = TSlotExtrusionModelPropsInput & {
 declare function createTSlotExtrusionGeom(input?: TSlotExtrusionModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function TSlotExtrusion({ color, ...props }: TSlotExtrusionProps): react_jsx_runtime.JSX.Element;
 
+interface TSlotGussetMesh {
+    positions: number[];
+    indices: number[];
+}
+/** Right triangular flat plate at Z=0..thickness, with both complete through
+ * capsules at the mounting centers/orientations resolved by modelprinter.
+ */
+declare function createTSlotGussetMesh(input?: TSlotGussetModelPropsInput): TSlotGussetMesh;
+
+type TSlotGussetProps = TSlotGussetModelPropsInput & {
+    color?: string;
+};
+declare function createTSlotGussetGeom(input?: TSlotGussetModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function TSlotGusset({ color, ...props }: TSlotGussetProps): react_jsx_runtime.JSX.Element;
+
+interface TSlotInsideCornerMesh {
+    positions: number[];
+    indices: number[];
+}
+/** Constant-thickness quarter bend joining two perpendicular drilled legs.
+ * Virtual inside corner is X=Z=0; width is centered on Y. No internal seam caps.
+ */
+declare function createTSlotInsideCornerMesh(input?: TSlotInsideCornerModelPropsInput): TSlotInsideCornerMesh;
+
+type TSlotInsideCornerProps = TSlotInsideCornerModelPropsInput & {
+    color?: string;
+};
+declare function createTSlotInsideCornerGeom(input?: TSlotInsideCornerModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function TSlotInsideCorner({ color, ...props }: TSlotInsideCornerProps): react_jsx_runtime.JSX.Element;
+
 /** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
 interface WormGearMesh {
     positions: number[];
@@ -312,4 +342,4 @@ declare function createJSCADRenderer(jscad: typeof jscadModeling): {
     };
 };
 
-export { ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, type ColoredGeom, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, Fragment, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PlainBushing, type PlainBushingMesh, type PlainBushingProps, type RenderResult, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SpurGear, type SpurGearMesh, type SpurGearProps, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, type VNode, WormGear, type WormGearMesh, type WormGearProps, convertCSGToThreeGeom, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createCompressionSpringGeom, createCompressionSpringMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createJSCADRenderer, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createWormGearGeom, createWormGearMesh, getJscadModelForFootprint, getJscadModelForFootprintWithPads, h };
+export { ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, CableGrommet, type CableGrommetMesh, type CableGrommetMeshOptions, type CableGrommetProps, type ColoredGeom, CompressionSpring, type CompressionSpringMesh, type CompressionSpringMeshOptions, type CompressionSpringProps, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, Fragment, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexNut, type HexNutMesh, type HexNutMeshOptions, type HexNutProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PlainBushing, type PlainBushingMesh, type PlainBushingProps, type RenderResult, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SpurGear, type SpurGearMesh, type SpurGearProps, TSlotExtrusion, type TSlotExtrusionMesh, type TSlotExtrusionProps, TSlotGusset, type TSlotGussetMesh, type TSlotGussetProps, TSlotInsideCorner, type TSlotInsideCornerMesh, type TSlotInsideCornerProps, type VNode, WormGear, type WormGearMesh, type WormGearProps, convertCSGToThreeGeom, createButtonScrewGeom, createButtonScrewMesh, createCableGrommetGeom, createCableGrommetMesh, createCompressionSpringGeom, createCompressionSpringMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexNutGeom, createHexNutMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createJSCADRenderer, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createTSlotExtrusionGeom, createTSlotExtrusionMesh, createTSlotGussetGeom, createTSlotGussetMesh, createTSlotInsideCornerGeom, createTSlotInsideCornerMesh, createWormGearGeom, createWormGearMesh, getJscadModelForFootprint, getJscadModelForFootprintWithPads, h };

package/dist/vanilla.js

@@ -183,24 +183,24 @@ var FootprintPlatedHole = ({
 import { buttonScrewModelDefinitionSchema } from "@tscircuit/modelprinter";
 
 // lib/model-registry.ts
-function defineModelRenderer(model18) {
-  return model18;
+function defineModelRenderer(model20) {
+  return model20;
 }
 var ModelRendererRegistry = class {
   models = /* @__PURE__ */ new Map();
-  register(model18) {
-    if (typeof model18.name !== "string" || !/^[a-z]+$/.test(model18.name)) {
+  register(model20) {
+    if (typeof model20.name !== "string" || !/^[a-z]+$/.test(model20.name)) {
       throw new Error(
         "Model renderer names must contain only lowercase letters"
       );
     }
-    if (this.models.has(model18.name)) {
-      throw new Error(`Model renderer "${model18.name}" is already registered`);
+    if (this.models.has(model20.name)) {
+      throw new Error(`Model renderer "${model20.name}" is already registered`);
     }
-    if (model18.pads !== "none" && model18.pads !== "footprinter") {
+    if (model20.pads !== "none" && model20.pads !== "footprinter") {
       throw new Error('Model renderer pads must be "none" or "footprinter"');
     }
-    const { name, schema, render: render2, pads } = model18;
+    const { name, schema, render: render2, pads } = model20;
     this.models.set(name, {
       name,
       schema,
@@ -2984,6 +2984,25 @@ function extrudePlanarProfile({
       [indices[i + 1], indices[i + 2]] = [indices[i + 2], indices[i + 1]];
   return { positions, indices };
 }
+function joinProfileMeshes(meshes) {
+  const positions = [];
+  const indices = [];
+  const vertices = /* @__PURE__ */ new Map();
+  for (const mesh of meshes) {
+    for (const index of mesh.indices) {
+      const point = mesh.positions.slice(index * 3, index * 3 + 3);
+      const key = point.map((value) => value.toFixed(12)).join(",");
+      let shared = vertices.get(key);
+      if (shared === void 0) {
+        shared = positions.length / 3;
+        vertices.set(key, shared);
+        positions.push(...point);
+      }
+      indices.push(shared);
+    }
+  }
+  return { positions, indices };
+}
 function circularProfile(x, y, radius, segments = 96) {
   return Array.from({ length: segments }, (_, index) => {
     const angle = index * 2 * Math.PI / segments;
@@ -3057,6 +3076,153 @@ function register16(registry) {
   registry.register(model16);
 }
 
+// lib/models/tslotgusset/register.tsx
+import { tSlotGussetModelDefinitionSchema } from "@tscircuit/modelprinter";
+
+// lib/models/tslotgusset/mesh.ts
+import {
+  getTSlotGussetMountingSlots,
+  tSlotGussetModelPropsSchema
+} from "@tscircuit/modelprinter";
+function createTSlotGussetMesh(input = {}) {
+  const props = tSlotGussetModelPropsSchema.parse(input);
+  const holes = getTSlotGussetMountingSlots(props).map((slot) => {
+    const radius = slot.width / 2;
+    const halfStraight = (slot.length - slot.width) / 2;
+    const rotate = (u, v) => slot.orientation === 0 ? [slot.center.x + u, slot.center.y + v] : [slot.center.x - v, slot.center.y + u];
+    if (halfStraight === 0)
+      return circularProfile(0, 0, radius).map(([u, v]) => rotate(u, v));
+    const loop = [];
+    for (const side of [1, -1])
+      for (let step = 0; step <= 48; step++) {
+        const angle = -Math.PI / 2 + step * Math.PI / 48 + (side < 0 ? Math.PI : 0);
+        loop.push(
+          rotate(
+            side * halfStraight + radius * Math.cos(angle),
+            radius * Math.sin(angle)
+          )
+        );
+      }
+    return loop;
+  });
+  return extrudePlanarProfile({
+    outer: [
+      [0, 0],
+      [props.width, 0],
+      [0, props.height]
+    ],
+    holes,
+    start: 0,
+    end: props.thickness
+  });
+}
+
+// lib/models/tslotgusset/TSlotGusset.tsx
+function createTSlotGussetGeom(input = {}) {
+  return indexedMeshToGeom3(createTSlotGussetMesh(input));
+}
+function TSlotGusset({ color = "#8995a3", ...props }) {
+  return /* @__PURE__ */ jsx(Colorize, { color, children: /* @__PURE__ */ jsx(Custom, { geometry: createTSlotGussetGeom(props) }) });
+}
+
+// lib/models/tslotgusset/register.tsx
+var model17 = defineModelRenderer({
+  name: "tslotgusset",
+  schema: tSlotGussetModelDefinitionSchema,
+  render: ({ fn, ...props }) => /* @__PURE__ */ jsx(TSlotGusset, { ...props }),
+  pads: "none"
+});
+function register17(registry) {
+  registry.register(model17);
+}
+
+// lib/models/tslotinsidecorner/register.tsx
+import { tSlotInsideCornerModelDefinitionSchema } from "@tscircuit/modelprinter";
+
+// lib/models/tslotinsidecorner/mesh.ts
+import {
+  tSlotInsideCornerModelPropsSchema
+} from "@tscircuit/modelprinter";
+function createTSlotInsideCornerMesh(input = {}) {
+  const props = tSlotInsideCornerModelPropsSchema.parse(input);
+  const { width: width10, legLength, thickness, bendRadius, holeOffset, holeDiameter } = props;
+  const r = bendRadius;
+  const outerRadius = r + thickness;
+  const panel = [
+    [r, -width10 / 2],
+    [legLength, -width10 / 2],
+    [legLength, width10 / 2],
+    [r, width10 / 2]
+  ];
+  const holes = [circularProfile(holeOffset, 0, holeDiameter / 2)];
+  const bend = [];
+  if (r === 0) bend.push([0, 0]);
+  else
+    for (let step = 0; step <= 48; step++) {
+      const angle = -Math.PI / 2 - step * Math.PI / 96;
+      bend.push(
+        step === 0 ? [r, 0] : step === 48 ? [0, r] : [r + r * Math.cos(angle), r + r * Math.sin(angle)]
+      );
+    }
+  for (let step = 0; step <= 48; step++) {
+    const angle = -Math.PI + step * Math.PI / 96;
+    bend.push(
+      step === 0 ? [-thickness, r] : step === 48 ? [r, -thickness] : [
+        r + outerRadius * Math.cos(angle),
+        r + outerRadius * Math.sin(angle)
+      ]
+    );
+  }
+  return joinProfileMeshes([
+    extrudePlanarProfile({
+      outer: panel,
+      holes,
+      start: -thickness,
+      end: 0,
+      skipWall: (a, b) => a[0] === r && b[0] === r
+    }),
+    extrudePlanarProfile({
+      outer: panel,
+      holes,
+      start: -thickness,
+      end: 0,
+      project: (u, v, depth) => [depth, v, u],
+      reverse: true,
+      skipWall: (a, b) => a[0] === r && b[0] === r
+    }),
+    extrudePlanarProfile({
+      outer: bend,
+      start: -width10 / 2,
+      end: width10 / 2,
+      project: (u, v, depth) => [u, depth, v],
+      reverse: true,
+      skipWall: (a, b) => a[0] === r && b[0] === r || a[1] === r && b[1] === r
+    })
+  ]);
+}
+
+// lib/models/tslotinsidecorner/TSlotInsideCorner.tsx
+function createTSlotInsideCornerGeom(input = {}) {
+  return indexedMeshToGeom3(createTSlotInsideCornerMesh(input));
+}
+function TSlotInsideCorner({
+  color = "#8995a3",
+  ...props
+}) {
+  return /* @__PURE__ */ jsx(Colorize, { color, children: /* @__PURE__ */ jsx(Custom, { geometry: createTSlotInsideCornerGeom(props) }) });
+}
+
+// lib/models/tslotinsidecorner/register.tsx
+var model18 = defineModelRenderer({
+  name: "tslotinsidecorner",
+  schema: tSlotInsideCornerModelDefinitionSchema,
+  render: ({ fn, ...props }) => /* @__PURE__ */ jsx(TSlotInsideCorner, { ...props }),
+  pads: "none"
+});
+function register18(registry) {
+  registry.register(model18);
+}
+
 // lib/models/wormgear/register.tsx
 import { wormGearModelDefinitionSchema } from "@tscircuit/modelprinter";
 
@@ -3246,14 +3412,14 @@ function WormGear({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/wormgear/register.tsx
-var model17 = defineModelRenderer({
+var model19 = defineModelRenderer({
   name: "wormgear",
   schema: wormGearModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(WormGear, { ...props }),
   pads: "none"
 });
-function register17(registry) {
-  registry.register(model17);
+function register19(registry) {
+  registry.register(model19);
 }
 
 // lib/generated/model-renderers.ts
@@ -3275,6 +3441,8 @@ function registerAllModelRenderers(registry) {
   register15(registry);
   register16(registry);
   register17(registry);
+  register18(registry);
+  register19(registry);
 }
 
 // lib/default-model-registry.ts
@@ -10831,10 +10999,10 @@ var SOT143 = ({ footprint = "sot143" }) => {
 var Footprinter3d = ({ footprint }) => {
   const modelFn = mp3.string(footprint.split("_", 1)[0]).params().fn;
   if (mp3.getModelNames().includes(modelFn)) {
-    const model18 = mp3.string(footprint).json();
-    const renderer = modelRendererRegistry.get(model18.fn);
+    const model20 = mp3.string(footprint).json();
+    const renderer = modelRendererRegistry.get(model20.fn);
     if (renderer) {
-      return renderer.render(model18);
+      return renderer.render(model20);
     }
   }
   let normalizedFootprint = footprint;
@@ -11804,6 +11972,8 @@ export {
   SheetMetal,
   SpurGear,
   TSlotExtrusion,
+  TSlotGusset,
+  TSlotInsideCorner,
   WormGear,
   convertCSGToThreeGeom,
   createButtonScrewGeom,
@@ -11835,6 +12005,10 @@ export {
   createSpurGearMesh,
   createTSlotExtrusionGeom,
   createTSlotExtrusionMesh,
+  createTSlotGussetGeom,
+  createTSlotGussetMesh,
+  createTSlotInsideCornerGeom,
+  createTSlotInsideCornerMesh,
   createWormGearGeom,
   createWormGearMesh,
   getJscadModelForFootprint,