jscad-electronics 0.0.197 → 0.0.199

package/dist/vanilla.d.ts

@@ -3,7 +3,7 @@ import { BufferGeometry } from 'three';
 import * as jscadModeling from '@jscad/modeling';
 import * as react_jsx_runtime from 'react/jsx-runtime';
 import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
-import { FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, SheetMetalModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
+import { ButtonScrewModelPropsInput, FlangedBushingModelPropsInput, FlatHeadScrewModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, PanScrewModelPropsInput, PlainBushingModelPropsInput, SheetMetalModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
 
 type VNode = {
     type: any;
@@ -26,6 +26,40 @@ type RenderResult = {
 
 declare function convertCSGToThreeGeom(csg: any): BufferGeometry;
 
+/** Indexed counterclockwise triangles in millimeters. */
+interface ButtonScrewMesh {
+    positions: number[];
+    indices: number[];
+}
+/** Renderer resolution affects tessellation only, never model specifications. */
+interface ButtonScrewMeshOptions {
+    radialSegments?: number;
+    segmentsPerPitch?: number;
+}
+/** Closed nominal surface: bearing z=0, tip -length, blind hex socket above. */
+declare function createButtonScrewMesh(input: ButtonScrewModelPropsInput, options?: ButtonScrewMeshOptions): ButtonScrewMesh;
+
+type ButtonScrewProps = ButtonScrewModelPropsInput & {
+    color?: string;
+};
+declare function createButtonScrewGeom(input: ButtonScrewModelPropsInput, resolution?: ButtonScrewMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function ButtonScrew({ color, ...props }: ButtonScrewProps): react_jsx_runtime.JSX.Element;
+
+/** Shared ring vertices and outward counterclockwise triangles, in millimeters. */
+interface FlangedBushingMesh {
+    positions: number[];
+    indices: number[];
+}
+/** Integral flange at Z=0..flangeThickness; total length includes the flange. */
+declare function createFlangedBushingMesh(input: FlangedBushingModelPropsInput): FlangedBushingMesh;
+
+type FlangedBushingProps = FlangedBushingModelPropsInput & {
+    color?: string;
+};
+/** Square integral flange at the Z=0 end; bore continues through overall length. */
+declare function createFlangedBushingGeom(input: FlangedBushingModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function FlangedBushing({ color, ...props }: FlangedBushingProps): react_jsx_runtime.JSX.Element;
+
 interface FlatHeadScrewMeshOptions {
     radialSegments?: number;
     threadStepsPerTurn?: number;
@@ -210,4 +244,4 @@ declare function createJSCADRenderer(jscad: typeof jscadModeling): {
     };
 };
 
-export { type ColoredGeom, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, Fragment, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PlainBushing, type PlainBushingMesh, type PlainBushingProps, type RenderResult, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SpurGear, type SpurGearMesh, type SpurGearProps, type VNode, WormGear, type WormGearMesh, type WormGearProps, convertCSGToThreeGeom, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createJSCADRenderer, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createWormGearGeom, createWormGearMesh, getJscadModelForFootprint, getJscadModelForFootprintWithPads, h };
+export { ButtonScrew, type ButtonScrewMesh, type ButtonScrewMeshOptions, type ButtonScrewProps, type ColoredGeom, FlangedBushing, type FlangedBushingMesh, type FlangedBushingProps, FlatHeadScrew, type FlatHeadScrewMesh, type FlatHeadScrewMeshOptions, type FlatHeadScrewProps, Fragment, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PanScrew, type PanScrewMesh, type PanScrewMeshOptions, type PanScrewProps, PlainBushing, type PlainBushingMesh, type PlainBushingProps, type RenderResult, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SpurGear, type SpurGearMesh, type SpurGearProps, type VNode, WormGear, type WormGearMesh, type WormGearProps, convertCSGToThreeGeom, createButtonScrewGeom, createButtonScrewMesh, createFlangedBushingGeom, createFlangedBushingMesh, createFlatHeadScrewGeom, createFlatHeadScrewMesh, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createJSCADRenderer, createPanScrewGeom, createPanScrewMesh, createPlainBushingGeom, createPlainBushingMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createWormGearGeom, createWormGearMesh, getJscadModelForFootprint, getJscadModelForFootprintWithPads, h };

package/dist/vanilla.js

@@ -179,28 +179,28 @@ var FootprintPlatedHole = ({
   throw new Error("Shape not supported: " + hole.shape);
 };
 
-// lib/models/flatheadscrew/register.tsx
-import { flatHeadScrewModelDefinitionSchema } from "@tscircuit/modelprinter";
+// lib/models/buttonscrew/register.tsx
+import { buttonScrewModelDefinitionSchema } from "@tscircuit/modelprinter";
 
 // lib/model-registry.ts
-function defineModelRenderer(model12) {
-  return model12;
+function defineModelRenderer(model14) {
+  return model14;
 }
 var ModelRendererRegistry = class {
   models = /* @__PURE__ */ new Map();
-  register(model12) {
-    if (typeof model12.name !== "string" || !/^[a-z]+$/.test(model12.name)) {
+  register(model14) {
+    if (typeof model14.name !== "string" || !/^[a-z]+$/.test(model14.name)) {
       throw new Error(
         "Model renderer names must contain only lowercase letters"
       );
     }
-    if (this.models.has(model12.name)) {
-      throw new Error(`Model renderer "${model12.name}" is already registered`);
+    if (this.models.has(model14.name)) {
+      throw new Error(`Model renderer "${model14.name}" is already registered`);
     }
-    if (model12.pads !== "none" && model12.pads !== "footprinter") {
+    if (model14.pads !== "none" && model14.pads !== "footprinter") {
       throw new Error('Model renderer pads must be "none" or "footprinter"');
     }
-    const { name, schema, render: render2, pads } = model12;
+    const { name, schema, render: render2, pads } = model14;
     this.models.set(name, {
       name,
       schema,
@@ -226,6 +226,218 @@ var ModelRendererRegistry = class {
   }
 };
 
+// lib/models/buttonscrew/mesh.ts
+import {
+  buttonScrewModelPropsSchema,
+  getButtonScrewDimensions
+} from "@tscircuit/modelprinter";
+function resolution(options) {
+  const radial = options.radialSegments ?? 96;
+  const axial = options.segmentsPerPitch ?? 32;
+  if (!Number.isInteger(radial) || radial < 24 || radial > 192 || radial % 12 !== 0 || !Number.isInteger(axial) || axial < 8 || axial > 64)
+    throw new Error(
+      "Mesh resolution limit: radial segments must be a multiple of 12 in [24,192], pitch segments an integer in [8,64]"
+    );
+  return { radial, axial };
+}
+function surface(segments) {
+  const positions = [], indices = [];
+  const ring = (z, radius) => {
+    const start = positions.length / 3;
+    for (let i = 0; i < segments; i++) {
+      const angle = i * 2 * Math.PI / segments;
+      const r = radius(angle);
+      positions.push(r * Math.cos(angle), r * Math.sin(angle), z);
+    }
+    return start;
+  };
+  const connect = (a, b) => {
+    for (let i = 0; i < segments; i++) {
+      const n = (i + 1) % segments;
+      indices.push(a + i, a + n, b + n, a + i, b + n, b + i);
+    }
+  };
+  const cap = (start, z, up) => {
+    const center = positions.length / 3;
+    positions.push(0, 0, z);
+    for (let i = 0; i < segments; i++) {
+      const n = (i + 1) % segments;
+      indices.push(center, start + (up ? i : n), start + (up ? n : i));
+    }
+  };
+  return { positions, indices, ring, connect, cap };
+}
+function hexRadius(angle, acrossFlats) {
+  const period = Math.PI / 3;
+  const distance2 = ((angle - Math.PI / 2 + period / 2) % period + period) % period - period / 2;
+  return acrossFlats / 2 / Math.cos(distance2);
+}
+function threadDistance(z, angle, pitch, hand = 1) {
+  const phase = ((z / pitch - hand * angle / (2 * Math.PI)) % 1 + 1) % 1;
+  return Math.min(phase, 1 - phase);
+}
+function createButtonScrewMesh(input, options = {}) {
+  const props = buttonScrewModelPropsSchema.parse(input);
+  const d = getButtonScrewDimensions(input);
+  const { radial, axial } = resolution(options);
+  const steps = Math.max(2, Math.ceil(props.length / d.threadPitch * axial));
+  if (steps > 24e3 || !Number.isFinite(steps))
+    throw new Error("Mesh resolution limit: too many thread turns");
+  const m = surface(radial);
+  const radius = d.diameter / 2;
+  const depth = (d.diameter - d.threadMinorDiameter) / 2;
+  const fillet = d.underHeadRadius;
+  const levels = new Set(
+    props.showThreads ? Array.from(
+      { length: steps + 1 },
+      (_, i) => -props.length + props.length * i / steps
+    ) : [-props.length, 0]
+  );
+  levels.add(-props.length + d.tipChamfer);
+  levels.add(-d.threadPitch);
+  for (let i = 0; i <= 16; i++)
+    levels.add(-fillet + fillet * Math.sin(i * Math.PI / 32));
+  let previous = -1;
+  const shaftLevels = [...levels].sort((a, b) => a - b).filter((z, index, sorted) => index === 0 || z - sorted[index - 1] > 1e-10);
+  for (const z of shaftLevels) {
+    const current = m.ring(z, (angle) => {
+      const envelope = z >= -fillet ? radius + fillet - Math.sqrt(Math.max(0, fillet ** 2 - (z + fillet) ** 2)) : radius;
+      const groove = Math.min(
+        depth,
+        Math.max(
+          0,
+          (threadDistance(z + props.length, angle, d.threadPitch) - 1 / 16) * d.threadPitch * Math.sqrt(3)
+        )
+      );
+      const threaded = envelope - (props.showThreads ? groove * Math.min(1, -z / d.threadPitch) : 0);
+      const tip = z + props.length < d.tipChamfer ? radius - (d.tipChamfer - (z + props.length)) : Infinity;
+      return Math.min(threaded, tip);
+    });
+    if (previous < 0) m.cap(current, z, false);
+    else m.connect(previous, current);
+    previous = current;
+  }
+  const add = (z, radiusAt) => {
+    const current = m.ring(z, radiusAt);
+    m.connect(previous, current);
+    previous = current;
+  };
+  add(0, () => d.headDiameter / 2);
+  for (let i = 1; i <= 24; i++) {
+    const z = d.headHeight * i / 24;
+    add(
+      z,
+      () => d.crownArcCenterR + Math.sqrt(
+        Math.max(0, d.crownRadius ** 2 - (z - d.crownArcCenterZ) ** 2)
+      )
+    );
+  }
+  add(d.topZ, (angle) => hexRadius(angle, d.socketWidth));
+  add(d.topZ - d.socketDepth, (angle) => hexRadius(angle, d.socketWidth));
+  m.cap(previous, d.topZ - d.socketDepth, true);
+  return { positions: m.positions, indices: m.indices };
+}
+
+// lib/mechanical/indexedMeshToGeom3.ts
+import jscad from "@jscad/modeling";
+function indexedMeshToGeom3(mesh) {
+  const polygons = [];
+  for (let i = 0; i < mesh.indices.length; i += 3)
+    polygons.push(
+      mesh.indices.slice(i, i + 3).map((index) => [
+        mesh.positions[index * 3],
+        mesh.positions[index * 3 + 1],
+        mesh.positions[index * 3 + 2]
+      ])
+    );
+  return jscad.geometries.geom3.fromPoints(polygons);
+}
+
+// lib/models/buttonscrew/ButtonScrew.tsx
+function createButtonScrewGeom(input, resolution2) {
+  return indexedMeshToGeom3(createButtonScrewMesh(input, resolution2));
+}
+function ButtonScrew({ color = "#737e8f", ...props }) {
+  return /* @__PURE__ */ jsx(Colorize, { color, children: /* @__PURE__ */ jsx(Custom, { geometry: createButtonScrewGeom(props) }) });
+}
+
+// lib/models/buttonscrew/register.tsx
+var model = defineModelRenderer({
+  name: "buttonscrew",
+  schema: buttonScrewModelDefinitionSchema,
+  render: ({ fn, ...props }) => /* @__PURE__ */ jsx(ButtonScrew, { ...props }),
+  pads: "none"
+});
+function register(registry) {
+  registry.register(model);
+}
+
+// lib/models/flangedbushing/register.tsx
+import { flangedBushingModelDefinitionSchema } from "@tscircuit/modelprinter";
+
+// lib/models/flangedbushing/mesh.ts
+import {
+  flangedBushingModelPropsSchema,
+  getFlangedBushingDimensions
+} from "@tscircuit/modelprinter";
+function createFlangedBushingMesh(input) {
+  const props = flangedBushingModelPropsSchema.parse(input);
+  const d = getFlangedBushingDimensions(props);
+  const ri = d.innerDiameter / 2;
+  const ro = d.outerDiameter / 2;
+  const rf = d.flangeDiameter / 2;
+  const profile = [
+    [rf, 0],
+    [rf, d.shoulderZ],
+    [ro, d.shoulderZ],
+    [ro, d.length],
+    [ri, d.length],
+    [ri, 0]
+  ];
+  const segments = 96;
+  const positions = [];
+  const indices = [];
+  for (const [radius, z] of profile)
+    for (let i = 0; i < segments; i++) {
+      const angle = i * Math.PI * 2 / segments;
+      positions.push(radius * Math.cos(angle), radius * Math.sin(angle), z);
+    }
+  for (let ring = 0; ring < profile.length; ring++) {
+    const a = ring * segments;
+    const b = (ring + 1) % profile.length * segments;
+    for (let i = 0; i < segments; i++) {
+      const next = (i + 1) % segments;
+      indices.push(a + i, a + next, b + next, a + i, b + next, b + i);
+    }
+  }
+  return { positions, indices };
+}
+
+// lib/models/flangedbushing/FlangedBushing.tsx
+function createFlangedBushingGeom(input) {
+  return indexedMeshToGeom3(createFlangedBushingMesh(input));
+}
+function FlangedBushing({
+  color = "#a18450",
+  ...props
+}) {
+  return /* @__PURE__ */ jsx(Colorize, { color, children: /* @__PURE__ */ jsx(Custom, { geometry: createFlangedBushingGeom(props) }) });
+}
+
+// lib/models/flangedbushing/register.tsx
+var model2 = defineModelRenderer({
+  name: "flangedbushing",
+  schema: flangedBushingModelDefinitionSchema,
+  render: ({ fn, ...props }) => /* @__PURE__ */ jsx(FlangedBushing, { ...props }),
+  pads: "none"
+});
+function register2(registry) {
+  registry.register(model2);
+}
+
+// lib/models/flatheadscrew/register.tsx
+import { flatHeadScrewModelDefinitionSchema } from "@tscircuit/modelprinter";
+
 // lib/models/flatheadscrew/mesh.ts
 import {
   flatHeadScrewModelPropsSchema
@@ -329,33 +541,18 @@ function createFlatHeadScrewMesh(input, options = {}) {
       filletCenterZ + p.underHeadRadius * Math.sin(angle)
     );
   }
-  const hexRadius = (theta) => p.socketAcrossFlats / 2 / Math.max(
+  const hexRadius2 = (theta) => p.socketAcrossFlats / 2 / Math.max(
     Math.abs(Math.sin(theta)),
     Math.abs(Math.sin(theta + 2 * Math.PI / 3)),
     Math.abs(Math.sin(theta + 4 * Math.PI / 3))
   );
   add(() => p.headDiameter / 2, 0);
-  add(hexRadius, 0);
-  add(hexRadius, -p.socketDepth);
+  add(hexRadius2, 0);
+  add(hexRadius2, -p.socketDepth);
   cap(previous, -p.socketDepth, true);
   return { positions, indices };
 }
 
-// lib/mechanical/indexedMeshToGeom3.ts
-import jscad from "@jscad/modeling";
-function indexedMeshToGeom3(mesh) {
-  const polygons = [];
-  for (let i = 0; i < mesh.indices.length; i += 3)
-    polygons.push(
-      mesh.indices.slice(i, i + 3).map((index) => [
-        mesh.positions[index * 3],
-        mesh.positions[index * 3 + 1],
-        mesh.positions[index * 3 + 2]
-      ])
-    );
-  return jscad.geometries.geom3.fromPoints(polygons);
-}
-
 // lib/models/flatheadscrew/FlatHeadScrew.tsx
 function createFlatHeadScrewGeom(input, options) {
   return indexedMeshToGeom3(createFlatHeadScrewMesh(input, options));
@@ -368,14 +565,14 @@ function FlatHeadScrew({
 }
 
 // lib/models/flatheadscrew/register.tsx
-var model = defineModelRenderer({
+var model3 = defineModelRenderer({
   name: "flatheadscrew",
   schema: flatHeadScrewModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(FlatHeadScrew, { ...props }),
   pads: "none"
 });
-function register(registry) {
-  registry.register(model);
+function register3(registry) {
+  registry.register(model3);
 }
 
 // lib/models/flexscreen/register.tsx
@@ -1053,14 +1250,14 @@ var FlexScreen = (props) => {
 };
 
 // lib/models/flexscreen/register.tsx
-var model2 = defineModelRenderer({
+var model4 = defineModelRenderer({
   name: "flexscreen",
   schema: flexScreenModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(FlexScreen, { ...props }),
   pads: "footprinter"
 });
-function register2(registry) {
-  registry.register(model2);
+function register4(registry) {
+  registry.register(model4);
 }
 
 // lib/models/helicalgear/register.tsx
@@ -1266,14 +1463,14 @@ function HelicalGear({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/helicalgear/register.tsx
-var model3 = defineModelRenderer({
+var model5 = defineModelRenderer({
   name: "helicalgear",
   schema: helicalGearModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(HelicalGear, { ...props }),
   pads: "none"
 });
-function register3(registry) {
-  registry.register(model3);
+function register5(registry) {
+  registry.register(model5);
 }
 
 // lib/models/hexbolt/register.tsx
@@ -1382,20 +1579,20 @@ function createHexBoltMesh(input, options = {}) {
       filletCenterZ + p.underHeadRadius * Math.sin(angle)
     );
   }
-  const hexRadius = (theta) => p.headAcrossFlats / 2 / Math.max(
+  const hexRadius2 = (theta) => p.headAcrossFlats / 2 / Math.max(
     Math.abs(Math.sin(theta)),
     Math.abs(Math.sin(theta + 2 * Math.PI / 3)),
     Math.abs(Math.sin(theta + 4 * Math.PI / 3))
   );
-  add(hexRadius, 0);
+  add(hexRadius2, 0);
   const slope = Math.tan(p.headChamferAngle * Math.PI / 180);
   const start = p.headHeight - (p.headCornerDiameter - p.headChamferDiameter) / 2 * slope;
-  add(hexRadius, start);
+  add(hexRadius2, start);
   for (let i = 1; i <= 12; i++) {
     const z = start + (p.headHeight - start) * i / 12;
     add(
       (theta) => Math.min(
-        hexRadius(theta),
+        hexRadius2(theta),
         p.headChamferDiameter / 2 + (p.headHeight - z) / slope
       ),
       z
@@ -1414,14 +1611,14 @@ function HexBolt({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/hexbolt/register.tsx
-var model4 = defineModelRenderer({
+var model6 = defineModelRenderer({
   name: "hexbolt",
   schema: hexBoltModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(HexBolt, { ...props }),
   pads: "none"
 });
-function register4(registry) {
-  registry.register(model4);
+function register6(registry) {
+  registry.register(model6);
 }
 
 // lib/models/hexsocketbolt/register.tsx
@@ -1513,10 +1710,10 @@ var createHexSocketBoltMesh = (input) => {
   addRing(bevel, () => headDiameter / 2);
   addRing(headHeight - bevel, () => headDiameter / 2);
   addRing(headHeight, () => headDiameter / 2 - bevel);
-  const hexRadius = (angle, acrossFlats) => acrossFlats / 2 / Math.cos((angle + Math.PI / 6) % (Math.PI / 3) - Math.PI / 6);
-  addRing(headHeight, (angle) => hexRadius(angle, socketWidth + bevel));
-  addRing(headHeight - bevel / 2, (angle) => hexRadius(angle, socketWidth));
-  addRing(headHeight - socketDepth, (angle) => hexRadius(angle, socketWidth));
+  const hexRadius2 = (angle, acrossFlats) => acrossFlats / 2 / Math.cos((angle + Math.PI / 6) % (Math.PI / 3) - Math.PI / 6);
+  addRing(headHeight, (angle) => hexRadius2(angle, socketWidth + bevel));
+  addRing(headHeight - bevel / 2, (angle) => hexRadius2(angle, socketWidth));
+  addRing(headHeight - socketDepth, (angle) => hexRadius2(angle, socketWidth));
   cap(previous, headHeight - socketDepth, true);
   return { positions, indices };
 };
@@ -1533,14 +1730,14 @@ function HexSocketBolt({
 }
 
 // lib/models/hexsocketbolt/register.tsx
-var model5 = defineModelRenderer({
+var model7 = defineModelRenderer({
   name: "hexsocketbolt",
   schema: hexSocketBoltModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(HexSocketBolt, { ...props }),
   pads: "none"
 });
-function register5(registry) {
-  registry.register(model5);
+function register7(registry) {
+  registry.register(model7);
 }
 
 // lib/models/nema/register.tsx
@@ -1809,14 +2006,14 @@ var NEMA17 = (props) => /* @__PURE__ */ jsx(NemaMotor, { ...props, nemaSize: 17
 var NEMA23 = (props) => /* @__PURE__ */ jsx(NemaMotor, { ...props, nemaSize: 23 });
 
 // lib/models/nema/register.tsx
-var model6 = defineModelRenderer({
+var model8 = defineModelRenderer({
   name: "nema",
   schema: nemaMotorModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(NemaMotor, { ...props }),
   pads: "none"
 });
-function register6(registry) {
-  registry.register(model6);
+function register8(registry) {
+  registry.register(model8);
 }
 
 // lib/models/panscrew/register.tsx
@@ -2028,14 +2225,14 @@ function PanScrew({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/panscrew/register.tsx
-var model7 = defineModelRenderer({
+var model9 = defineModelRenderer({
   name: "panscrew",
   schema: panScrewModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(PanScrew, { ...props }),
   pads: "none"
 });
-function register7(registry) {
-  registry.register(model7);
+function register9(registry) {
+  registry.register(model9);
 }
 
 // lib/models/plainbushing/register.tsx
@@ -2098,14 +2295,14 @@ function PlainBushing({
 }
 
 // lib/models/plainbushing/register.tsx
-var model8 = defineModelRenderer({
+var model10 = defineModelRenderer({
   name: "plainbushing",
   schema: plainBushingModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(PlainBushing, { ...props }),
   pads: "none"
 });
-function register8(registry) {
-  registry.register(model8);
+function register10(registry) {
+  registry.register(model10);
 }
 
 // lib/models/sheetmetal/register.tsx
@@ -2265,14 +2462,14 @@ function SheetMetal({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/sheetmetal/register.tsx
-var model9 = defineModelRenderer({
+var model11 = defineModelRenderer({
   name: "sheetmetal",
   schema: sheetMetalModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(SheetMetal, { ...props }),
   pads: "none"
 });
-function register9(registry) {
-  registry.register(model9);
+function register11(registry) {
+  registry.register(model11);
 }
 
 // lib/models/spurgear/register.tsx
@@ -2287,14 +2484,14 @@ function SpurGear({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/spurgear/register.tsx
-var model10 = defineModelRenderer({
+var model12 = defineModelRenderer({
   name: "spurgear",
   schema: spurGearModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(SpurGear, { ...props }),
   pads: "none"
 });
-function register10(registry) {
-  registry.register(model10);
+function register12(registry) {
+  registry.register(model12);
 }
 
 // lib/models/wormgear/register.tsx
@@ -2486,14 +2683,14 @@ function WormGear({ color = "#737e8f", ...props }) {
 }
 
 // lib/models/wormgear/register.tsx
-var model11 = defineModelRenderer({
+var model13 = defineModelRenderer({
   name: "wormgear",
   schema: wormGearModelDefinitionSchema,
   render: ({ fn, ...props }) => /* @__PURE__ */ jsx(WormGear, { ...props }),
   pads: "none"
 });
-function register11(registry) {
-  registry.register(model11);
+function register13(registry) {
+  registry.register(model13);
 }
 
 // lib/generated/model-renderers.ts
@@ -2509,6 +2706,8 @@ function registerAllModelRenderers(registry) {
   register9(registry);
   register10(registry);
   register11(registry);
+  register12(registry);
+  register13(registry);
 }
 
 // lib/default-model-registry.ts
@@ -10065,10 +10264,10 @@ var SOT143 = ({ footprint = "sot143" }) => {
 var Footprinter3d = ({ footprint }) => {
   const modelFn = mp3.string(footprint.split("_", 1)[0]).params().fn;
   if (mp3.getModelNames().includes(modelFn)) {
-    const model12 = mp3.string(footprint).json();
-    const renderer = modelRendererRegistry.get(model12.fn);
+    const model14 = mp3.string(footprint).json();
+    const renderer = modelRendererRegistry.get(model14.fn);
     if (renderer) {
-      return renderer.render(model12);
+      return renderer.render(model14);
     }
   }
   let normalizedFootprint = footprint;
@@ -11019,6 +11218,8 @@ function createJSCADRenderer(jscad4) {
   return { createJSCADRoot };
 }
 export {
+  ButtonScrew,
+  FlangedBushing,
   FlatHeadScrew,
   Fragment,
   HelicalGear,
@@ -11034,6 +11235,10 @@ export {
   SpurGear,
   WormGear,
   convertCSGToThreeGeom,
+  createButtonScrewGeom,
+  createButtonScrewMesh,
+  createFlangedBushingGeom,
+  createFlangedBushingMesh,
   createFlatHeadScrewGeom,
   createFlatHeadScrewMesh,
   createHelicalGearGeom,