jscad-electronics 0.0.171 → 0.0.173

package/dist/index.d.ts

@@ -215,13 +215,19 @@ declare const LegacySOIC: ({ pinCount, leadLength, leadWidth, pitch, bodyWidth,
 type SOICProps = Parameters<typeof LegacySOIC>[0] | DualRowGullWingDimensions;
 declare const SOIC: (props: SOICProps) => react_jsx_runtime.JSX.Element;
 
-declare const Tssop: ({ pinCount, leadLength, leadWidth, pitch, bodyWidth, }: {
+declare const LegacyTssop: ({ pinCount, leadLength, leadWidth, pitch, bodyWidth, }: {
     pinCount: number;
     pitch: number;
     leadWidth: number;
     leadLength: number;
     bodyWidth: number;
 }) => react_jsx_runtime.JSX.Element;
+/** TSSOP physical outline. leadSpan selects explicit package dimensions;
+ * existing land-derived callers retain their current geometry.
+ * See examples/fixtures/tssop-variants.ts for standard outline evidence.
+ */
+type TssopProps = Parameters<typeof LegacyTssop>[0] | DualRowGullWingDimensions;
+declare const Tssop: (props: TssopProps) => react_jsx_runtime.JSX.Element;
 
 declare const LegacyMSOP: ({ pinCount, padContactLength, leadWidth, pitch, bodyWidth, }: {
     pinCount: number;
@@ -245,7 +251,29 @@ declare const VSSOP: ({ pinCount, pitch, leadWidth, leadLength, bodyWidth, bodyL
     bodyLength?: number;
 }) => react_jsx_runtime.JSX.Element;
 
-declare const QFN: ({ num_pins, bodyWidth, bodyLength, bodyThickness, thermalPadSize, padWidth, padLength, pitch, thermalPadThickness, }: {
+/** Physical QFN outline, in mm. Unlike the legacy land-derived API, bodyWidth
+ * and bodyLength measure the mold itself. Terminal spans measure outer edges,
+ * allowing both sawn and punched standard outlines. Pin 1 is at -X,+Y.
+ * This variant has equally many terminals on all four sides.
+ */
+interface PhysicalQfnDimensions {
+    num_pins: number;
+    bodyWidth: number;
+    bodyLength: number;
+    /** Overall height A from the seating plane. */
+    bodyHeight: number;
+    standoff: number;
+    terminalSpanX: number;
+    terminalSpanY: number;
+    terminalThickness: number;
+    padWidth: number;
+    padLength: number;
+    pitch: number;
+    exposedPadWidth: number;
+    exposedPadLength: number;
+}
+
+declare const LegacyQFN: ({ num_pins, bodyWidth, bodyLength, bodyThickness, thermalPadSize, padWidth, padLength, pitch, thermalPadThickness, }: {
     num_pins: number;
     bodyWidth?: number;
     bodyLength?: number;
@@ -259,6 +287,9 @@ declare const QFN: ({ num_pins, bodyWidth, bodyLength, bodyThickness, thermalPad
     pitch?: number;
     thermalPadThickness?: number;
 }) => react_jsx_runtime.JSX.Element;
+/** Supplying bodyHeight opts into physical dimensions; legacy callers are unchanged. */
+type QFNProps = Parameters<typeof LegacyQFN>[0] | PhysicalQfnDimensions;
+declare const QFN: (props: QFNProps) => react_jsx_runtime.JSX.Element;
 
 declare const DFN: ({ num_pins, bodyWidth, bodyLength, bodyThickness, thermalPadSize, padWidth, padLength, pitch, thermalPadThickness, bodyStyle, standoff, terminalInset, terminalThickness, pin1TerminalChamfer, pin1MarkWidth, }: {
     num_pins: number;
@@ -297,13 +328,42 @@ declare const QFP: ({ pinCount, pitch, leadWidth, padContactLength, bodyWidth, }
 
 declare const TQFP: () => react_jsx_runtime.JSX.Element;
 
-declare const LQFP: ({ pinCount, pitch, leadWidth, padContactLength, bodyWidth, }: {
+/** Physical package dimensions in mm, independent of copper land dimensions.
+ * Four equal lead rows surround the mold. Z=0 is the seating plane.
+ * Pin 1 is at negative X, positive Y. Bend curvature and the pin-1 dimple are
+ * visual approximations, not additional package-identification parameters.
+ */
+interface PhysicalLqfpDimensions {
+    pinCount: number;
+    pitch: number;
+    bodyWidth: number;
+    bodyLength: number;
+    /** Overall height A, including standoff A1. */
+    bodyHeight: number;
+    standoff: number;
+    /** Outer lead-tip to outer lead-tip dimension E. */
+    leadSpanX: number;
+    leadSpanY: number;
+    leadWidth: number;
+    leadThickness: number;
+    /** Horizontal terminal contact, not the PCB land length. */
+    contactLength: number;
+    /** Per-side inset of the top and bottom mold faces. */
+    taperInset: number;
+}
+
+declare const LegacyLQFP: ({ pinCount, pitch, leadWidth, padContactLength, bodyWidth, }: {
     pinCount: number;
     pitch?: number;
     leadWidth?: number;
     padContactLength?: number;
     bodyWidth?: number;
 }) => react_jsx_runtime.JSX.Element;
+/** leadSpanX selects explicit physical dimensions. Existing callers retain
+ * their legacy geometry. See standard outline evidence in the fixtures.
+ */
+type LQFPProps = Parameters<typeof LegacyLQFP>[0] | PhysicalLqfpDimensions;
+declare const LQFP: (props: LQFPProps) => react_jsx_runtime.JSX.Element;
 
 interface SOD123Props {
     /** Overall package length, including the leads, in millimeters. */
@@ -1165,4 +1225,4 @@ declare const MelfResistor: ({ size, footprint, }: {
     footprint?: string;
 }) => react_jsx_runtime.JSX.Element;
 
-export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, CeramicChipAntenna, ChipBody, type ChipBodyProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LQFP, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, PinHeader, PinRow, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT963, Screen, type ScreenProps, SmdChipLead, type SmdChipLeadProps, type SmdLeadPad, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, StampBoard, TO220, type TO220Lead, type TO220Props, TO92, type TO92Lead, type TO92Props, TQFP, TantalumCapacitor, type TantalumCase, Tssop, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, tantalumCases, twoPadCrystalPackages };
+export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, CeramicChipAntenna, ChipBody, type ChipBodyProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, PinHeader, PinRow, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT963, Screen, type ScreenProps, SmdChipLead, type SmdChipLeadProps, type SmdLeadPad, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, StampBoard, TO220, type TO220Lead, type TO220Props, TO92, type TO92Lead, type TO92Props, TQFP, TantalumCapacitor, type TantalumCase, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, tantalumCases, twoPadCrystalPackages };