jscad-electronics 0.0.167 → 0.0.168

package/dist/index.d.ts

@@ -373,6 +373,37 @@ declare const SOD323F: () => react_jsx_runtime.JSX.Element;
 
 declare const SOD323FL: () => react_jsx_runtime.JSX.Element;
 
+/** Physical outline dimensions in mm, independent of a PCB land pattern. */
+interface FlatLeadDiodeDimensions {
+    bodyLength: number;
+    bodyWidth: number;
+    /** Overall height from the seating plane, including standoff. */
+    bodyHeight: number;
+    /** Outer tip-to-tip span of the two terminals. */
+    leadSpan: number;
+    cathodeLength: number;
+    cathodeWidth: number;
+    anodeLength: number;
+    anodeWidth: number;
+    terminalThickness: number;
+    standoff: number;
+    /** Inset of each top edge relative to the mold base. */
+    taperInset: number;
+    /** Top cathode band width; zero omits the band. */
+    markingWidth: number;
+}
+
+/** SOD-323HE flat-lead outline with symmetric contacts by default.
+ * Dimensional reference: https://www.es.co.th/Schemetic/PDF/RFU02VSM6S.PDF
+ * Defaults use nominal 2.0 x 1.4 mm mold, 2.5 mm lead span and 0.6 mm height.
+ * Buried terminal length, taper and marking dimensions are visual approximations.
+ * https://www.rohm.de/products/diodes/fast-recovery-diodes/standard/rfu02vsm6s-product
+ * Dimension overrides represent variants of this standard outline. They are
+ * geometry parameters, not new Footprinter tokens or manufacturer selectors.
+ */
+type SOD323HEProps = Partial<FlatLeadDiodeDimensions>;
+declare const SOD323HE: (props: SOD323HEProps) => react_jsx_runtime.JSX.Element;
+
 declare const SOD923: () => react_jsx_runtime.JSX.Element;
 
 interface SOT223Props {
@@ -1079,4 +1110,4 @@ declare const MelfResistor: ({ size, footprint, }: {
     footprint?: string;
 }) => react_jsx_runtime.JSX.Element;
 
-export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, CeramicChipAntenna, ChipBody, type ChipBodyProps, Crystal, type CrystalProps, DFN, DPAK, type DPAKProps, Display, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LQFP, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, PinHeader, PinRow, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD523, SOD723, SOD882, SOD923, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT963, Screen, type ScreenProps, SmdChipLead, type SmdChipLeadProps, type SmdLeadPad, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, StampBoard, TO220, type TO220Lead, type TO220Props, TO92, type TO92Lead, type TO92Props, TQFP, TantalumCapacitor, type TantalumCase, Tssop, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, tantalumCases, twoPadCrystalPackages };
+export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, CeramicChipAntenna, ChipBody, type ChipBodyProps, Crystal, type CrystalProps, DFN, DPAK, type DPAKProps, Display, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LQFP, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, PinHeader, PinRow, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT963, Screen, type ScreenProps, SmdChipLead, type SmdChipLeadProps, type SmdLeadPad, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, StampBoard, TO220, type TO220Lead, type TO220Props, TO92, type TO92Lead, type TO92Props, TQFP, TantalumCapacitor, type TantalumCase, Tssop, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, tantalumCases, twoPadCrystalPackages };

package/dist/index.js

@@ -8485,10 +8485,121 @@ var Footprinter3d = ({ footprint }) => {
   return null;
 };
 
+// lib/utils/FlatLeadDiode.tsx
+import { Colorize as Colorize55, Cuboid as Cuboid63, Hull as Hull28, Subtract as Subtract21 } from "jscad-fiber";
+import { Fragment as Fragment83, jsx as jsx91, jsxs as jsxs86 } from "react/jsx-runtime";
+function createFlatLeadDiode(p) {
+  const dimensions = [
+    "bodyLength",
+    "bodyWidth",
+    "bodyHeight",
+    "leadSpan",
+    "cathodeLength",
+    "cathodeWidth",
+    "anodeLength",
+    "anodeWidth",
+    "terminalThickness",
+    "standoff",
+    "taperInset",
+    "markingWidth"
+  ];
+  for (const name of dimensions) {
+    const value = p[name];
+    const allowZero = ["standoff", "taperInset", "markingWidth"].includes(name);
+    if (!Number.isFinite(value) || (allowZero ? value < 0 : value <= 0))
+      throw new Error(`Invalid diode dimension: ${name}`);
+  }
+  const overhang = (p.leadSpan - p.bodyLength) / 2;
+  if (overhang < 0 || p.cathodeLength <= overhang || p.anodeLength <= overhang || p.cathodeLength + p.anodeLength >= p.leadSpan || p.cathodeWidth > p.bodyWidth || p.anodeWidth > p.bodyWidth || p.standoff >= p.terminalThickness || p.terminalThickness >= p.bodyHeight || p.taperInset * 2 >= Math.min(p.bodyLength, p.bodyWidth) || p.markingWidth * 2 >= p.bodyLength - p.taperInset * 2)
+    throw new Error(
+      "Diode dimensions leave disconnected terminals or an invalid mold"
+    );
+  const slice = Math.min(p.bodyHeight - p.standoff, p.bodyWidth) / 100;
+  const body = /* @__PURE__ */ jsxs86(Hull28, { children: [
+    /* @__PURE__ */ jsx91(
+      Cuboid63,
+      {
+        size: [p.bodyLength, p.bodyWidth, slice],
+        center: [0, 0, p.standoff + slice / 2]
+      }
+    ),
+    /* @__PURE__ */ jsx91(
+      Cuboid63,
+      {
+        size: [
+          p.bodyLength - p.taperInset * 2,
+          p.bodyWidth - p.taperInset * 2,
+          slice
+        ],
+        center: [0, 0, p.bodyHeight - slice / 2]
+      }
+    )
+  ] });
+  const stripe = /* @__PURE__ */ jsx91(
+    Cuboid63,
+    {
+      size: [p.markingWidth, (p.bodyWidth - p.taperInset * 2) * 0.9, slice],
+      center: [
+        -p.bodyLength / 2 + p.taperInset + p.markingWidth,
+        0,
+        p.bodyHeight - slice / 2
+      ]
+    }
+  );
+  return /* @__PURE__ */ jsxs86(Fragment83, { children: [
+    /* @__PURE__ */ jsx91(Colorize55, { color: "#25272a", children: p.markingWidth > 0 ? /* @__PURE__ */ jsxs86(Subtract21, { children: [
+      body,
+      stripe
+    ] }) : body }),
+    /* @__PURE__ */ jsxs86(Colorize55, { color: "#c7c9cd", children: [
+      /* @__PURE__ */ jsx91(
+        Cuboid63,
+        {
+          size: [p.cathodeLength, p.cathodeWidth, p.terminalThickness],
+          center: [
+            -p.leadSpan / 2 + p.cathodeLength / 2,
+            0,
+            p.terminalThickness / 2
+          ]
+        }
+      ),
+      /* @__PURE__ */ jsx91(
+        Cuboid63,
+        {
+          size: [p.anodeLength, p.anodeWidth, p.terminalThickness],
+          center: [
+            p.leadSpan / 2 - p.anodeLength / 2,
+            0,
+            p.terminalThickness / 2
+          ]
+        }
+      )
+    ] }),
+    p.markingWidth > 0 && /* @__PURE__ */ jsx91(Colorize55, { color: "#aaaaa8", children: stripe })
+  ] });
+}
+
+// lib/SOD323HE.tsx
+var SOD323HE = (props) => createFlatLeadDiode({
+  bodyLength: 2,
+  bodyWidth: 1.4,
+  bodyHeight: 0.6,
+  leadSpan: 2.5,
+  cathodeLength: 0.55,
+  cathodeWidth: 0.8,
+  anodeLength: 0.55,
+  anodeWidth: 0.8,
+  terminalThickness: 0.17,
+  standoff: 0.05,
+  taperInset: 0.15,
+  markingWidth: 0.2,
+  ...props
+});
+
 // lib/TantalumCapacitor.tsx
 import { fp as fp11 } from "@tscircuit/footprinter";
-import { Colorize as Colorize55, Cuboid as Cuboid63, Hull as Hull28, Rotate as Rotate25, Translate as Translate42, Union as Union22 } from "jscad-fiber";
-import { jsx as jsx91, jsxs as jsxs86 } from "react/jsx-runtime";
+import { Colorize as Colorize56, Cuboid as Cuboid64, Hull as Hull29, Rotate as Rotate25, Translate as Translate42, Union as Union22 } from "jscad-fiber";
+import { jsx as jsx92, jsxs as jsxs87 } from "react/jsx-runtime";
 var tantalumCases = {
   A: [3.2, 1.6, 1.6, 1.2, 0.8],
   B: [3.5, 2.8, 1.9, 2.2, 0.8],
@@ -8508,35 +8619,35 @@ var TantalumCapacitor = ({
   if (pads.length !== 2) throw new Error("TantalumCapacitor requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx91(Translate42, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs86(Rotate25, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx91(Colorize55, { color: "#d5a64e", children: /* @__PURE__ */ jsxs86(Hull28, { children: [
-      /* @__PURE__ */ jsx91(Cuboid63, { size: [length - 0.1, width10, 0.02], center: [0, 0, 0.21] }),
-      /* @__PURE__ */ jsx91(
-        Cuboid63,
+  return /* @__PURE__ */ jsx92(Translate42, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs87(Rotate25, { rotation: [0, 0, angle], children: [
+    /* @__PURE__ */ jsx92(Colorize56, { color: "#d5a64e", children: /* @__PURE__ */ jsxs87(Hull29, { children: [
+      /* @__PURE__ */ jsx92(Cuboid64, { size: [length - 0.1, width10, 0.02], center: [0, 0, 0.21] }),
+      /* @__PURE__ */ jsx92(
+        Cuboid64,
         {
           size: [length - 0.25, width10 - 0.15, 0.02],
           center: [0, 0, height10 - 0.01]
         }
       )
     ] }) }),
-    /* @__PURE__ */ jsx91(Colorize55, { color: "#c5c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsxs86(Union22, { children: [
-      /* @__PURE__ */ jsx91(
-        Cuboid63,
+    /* @__PURE__ */ jsx92(Colorize56, { color: "#c5c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsxs87(Union22, { children: [
+      /* @__PURE__ */ jsx92(
+        Cuboid64,
         {
           size: [leadLength, leadWidth, 0.25],
           center: [side * (length - leadLength) / 2, 0, 0.125]
         }
       ),
-      /* @__PURE__ */ jsx91(
-        Cuboid63,
+      /* @__PURE__ */ jsx92(
+        Cuboid64,
         {
           size: [0.15, leadWidth, height10 * 0.45],
           center: [side * (length - 0.15) / 2, 0, height10 * 0.225]
         }
       )
     ] }, side)) }),
-    /* @__PURE__ */ jsx91(
-      Cuboid63,
+    /* @__PURE__ */ jsx92(
+      Cuboid64,
       {
         size: [0.25, width10 - 0.25, 0.01],
         center: [-length / 2 + 0.5, 0, height10],
@@ -8548,8 +8659,8 @@ var TantalumCapacitor = ({
 
 // lib/TwoPadCrystal.tsx
 import { fp as fp12 } from "@tscircuit/footprinter";
-import { Colorize as Colorize56, Cuboid as Cuboid64, RoundedCuboid as RoundedCuboid6, Rotate as Rotate26, Translate as Translate43 } from "jscad-fiber";
-import { jsx as jsx92, jsxs as jsxs87 } from "react/jsx-runtime";
+import { Colorize as Colorize57, Cuboid as Cuboid65, RoundedCuboid as RoundedCuboid6, Rotate as Rotate26, Translate as Translate43 } from "jscad-fiber";
+import { jsx as jsx93, jsxs as jsxs88 } from "react/jsx-runtime";
 var twoPadCrystalPackages = {
   FC135: [3.2, 1.5, 0.9, 0.7],
   FC12M: [2.05, 1.2, 0.6, 0.5],
@@ -8569,9 +8680,9 @@ var TwoPadCrystal = ({
   if (pads.length !== 2) throw new Error("TwoPadCrystal requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx92(Translate43, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs87(Rotate26, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx92(Colorize56, { color: "#e0dcca", children: /* @__PURE__ */ jsx92(Cuboid64, { size: [length, width10, 0.2], center: [0, 0, 0.13] }) }),
-    /* @__PURE__ */ jsx92(Colorize56, { color: "#acb1b8", children: /* @__PURE__ */ jsx92(
+  return /* @__PURE__ */ jsx93(Translate43, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs88(Rotate26, { rotation: [0, 0, angle], children: [
+    /* @__PURE__ */ jsx93(Colorize57, { color: "#e0dcca", children: /* @__PURE__ */ jsx93(Cuboid65, { size: [length, width10, 0.2], center: [0, 0, 0.13] }) }),
+    /* @__PURE__ */ jsx93(Colorize57, { color: "#acb1b8", children: /* @__PURE__ */ jsx93(
       RoundedCuboid6,
       {
         size: [length - 0.04, width10 - 0.04, height10 - 0.18],
@@ -8579,8 +8690,8 @@ var TwoPadCrystal = ({
         center: [0, 0, (height10 + 0.18) / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx92(Colorize56, { color: "#c6af65", children: [-1, 1].map((side) => /* @__PURE__ */ jsx92(
-      Cuboid64,
+    /* @__PURE__ */ jsx93(Colorize57, { color: "#c6af65", children: [-1, 1].map((side) => /* @__PURE__ */ jsx93(
+      Cuboid65,
       {
         size: [terminalLength, width10 - 0.12, 0.06],
         center: [side * (length - terminalLength) / 2, 0, 0.03]
@@ -8592,8 +8703,8 @@ var TwoPadCrystal = ({
 
 // lib/CeramicChipAntenna.tsx
 import { fp as fp13 } from "@tscircuit/footprinter";
-import { Colorize as Colorize57, Cuboid as Cuboid65, Rotate as Rotate27, Translate as Translate44 } from "jscad-fiber";
-import { jsx as jsx93, jsxs as jsxs88 } from "react/jsx-runtime";
+import { Colorize as Colorize58, Cuboid as Cuboid66, Rotate as Rotate27, Translate as Translate44 } from "jscad-fiber";
+import { jsx as jsx94, jsxs as jsxs89 } from "react/jsx-runtime";
 var CeramicChipAntenna = ({
   footprint = "smdpads2_p5.4mm_pw1mm_ph2mm"
 }) => {
@@ -8603,17 +8714,17 @@ var CeramicChipAntenna = ({
   if (pads.length !== 2) throw new Error("CeramicChipAntenna requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx93(Translate44, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs88(Rotate27, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx93(
-      Cuboid65,
+  return /* @__PURE__ */ jsx94(Translate44, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs89(Rotate27, { rotation: [0, 0, angle], children: [
+    /* @__PURE__ */ jsx94(
+      Cuboid66,
       {
         size: [4.44, 1.99, 1.14],
         center: [0, 0, 0.575],
         color: "#4053a3"
       }
     ),
-    /* @__PURE__ */ jsx93(Colorize57, { color: "#c2c4c7", children: [-1, 1].map((side) => /* @__PURE__ */ jsx93(
-      Cuboid65,
+    /* @__PURE__ */ jsx94(Colorize58, { color: "#c2c4c7", children: [-1, 1].map((side) => /* @__PURE__ */ jsx94(
+      Cuboid66,
       {
         size: [0.4, 2, 1.15],
         center: [side * 2.4, 0, 0.575],
@@ -8621,8 +8732,8 @@ var CeramicChipAntenna = ({
       },
       side
     )) }),
-    /* @__PURE__ */ jsx93(
-      Cuboid65,
+    /* @__PURE__ */ jsx94(
+      Cuboid66,
       {
         size: [0.9, 2, 0.01],
         center: [-1.75, 0, 1.145],
@@ -8634,8 +8745,8 @@ var CeramicChipAntenna = ({
 
 // lib/MelfResistor.tsx
 import { fp as fp14 } from "@tscircuit/footprinter";
-import { Colorize as Colorize58, Cylinder as Cylinder23, Rotate as Rotate28, Translate as Translate45 } from "jscad-fiber";
-import { jsx as jsx94, jsxs as jsxs89 } from "react/jsx-runtime";
+import { Colorize as Colorize59, Cylinder as Cylinder23, Rotate as Rotate28, Translate as Translate45 } from "jscad-fiber";
+import { jsx as jsx95, jsxs as jsxs90 } from "react/jsx-runtime";
 var melfResistorSizes = {
   "0102": [2.2, 1.1, 0.4],
   "0204": [3.6, 1.4, 0.75],
@@ -8654,15 +8765,15 @@ var MelfResistor = ({
   if (pads.length !== 2) throw new Error("MelfResistor requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx94(Translate45, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, diameter / 2], children: /* @__PURE__ */ jsx94(Rotate28, { rotation: [0, 0, angle], children: /* @__PURE__ */ jsxs89(Rotate28, { rotation: [0, Math.PI / 2, 0], children: [
-    /* @__PURE__ */ jsx94(Colorize58, { color: "#426d63", children: /* @__PURE__ */ jsx94(
+  return /* @__PURE__ */ jsx95(Translate45, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, diameter / 2], children: /* @__PURE__ */ jsx95(Rotate28, { rotation: [0, 0, angle], children: /* @__PURE__ */ jsxs90(Rotate28, { rotation: [0, Math.PI / 2, 0], children: [
+    /* @__PURE__ */ jsx95(Colorize59, { color: "#426d63", children: /* @__PURE__ */ jsx95(
       Cylinder23,
       {
         radius: (diameter - 0.08) / 2,
         height: length - 2 * capLength + 0.04
       }
     ) }),
-    /* @__PURE__ */ jsx94(Colorize58, { color: "#c6c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsx94(
+    /* @__PURE__ */ jsx95(Colorize59, { color: "#c6c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsx95(
       Cylinder23,
       {
         radius: diameter / 2,
@@ -8735,6 +8846,7 @@ export {
   SOD323,
   SOD323F,
   SOD323FL,
+  SOD323HE,
   SOD523,
   SOD723,
   SOD882,