jscad-electronics 0.0.166 → 0.0.168

package/dist/index.js

@@ -3495,7 +3495,7 @@ var SOT723 = () => {
 };
 
 // lib/dfn.tsx
-import { Cuboid as Cuboid31 } from "jscad-fiber";
+import { Colorize as Colorize23, Cuboid as Cuboid31, Hull as Hull18, Subtract as Subtract4 } from "jscad-fiber";
 import { Fragment as Fragment45, jsx as jsx49, jsxs as jsxs45 } from "react/jsx-runtime";
 var DFN = ({
   num_pins,
@@ -3508,8 +3508,41 @@ var DFN = ({
   padWidth = bodyLength10 / 5.3 * 0.6,
   padLength = bodyLength10 / 5.3 * 1,
   pitch = 0.5,
-  thermalPadThickness = 0.2
+  thermalPadThickness = 0.2,
+  bodyStyle = "chamfered",
+  standoff = 0,
+  terminalInset = 0,
+  terminalThickness = thermalPadThickness,
+  pin1TerminalChamfer = 0,
+  pin1MarkWidth = 0
 }) => {
+  if (bodyStyle === "rectangular") {
+    if (!Number.isInteger(num_pins) || num_pins < 2 || num_pins % 2 !== 0)
+      throw new Error("DFN requires an even pin count of at least two");
+    for (const value of [
+      bodyWidth,
+      bodyLength10,
+      bodyThickness,
+      padWidth,
+      padLength,
+      pitch,
+      terminalThickness
+    ])
+      if (!Number.isFinite(value) || value <= 0)
+        throw new Error("DFN dimensions must be finite and positive");
+    for (const value of [
+      standoff,
+      terminalInset,
+      pin1TerminalChamfer,
+      pin1MarkWidth
+    ])
+      if (!Number.isFinite(value) || value < 0)
+        throw new Error("DFN offsets must be finite and nonnegative");
+    if (terminalThickness <= standoff || terminalThickness > standoff + bodyThickness || terminalInset + padLength >= bodyWidth / 2 || (num_pins / 2 - 1) * pitch + padWidth > bodyLength10 || num_pins > 2 && padWidth >= pitch || pin1TerminalChamfer >= Math.min(padLength, padWidth / 2) || pin1MarkWidth >= bodyWidth / 4)
+      throw new Error(
+        "DFN dimensions leave disconnected or overlapping terminals"
+      );
+  }
   const pinPositions = [];
   const pinsPerSide = Math.floor(num_pins / 2);
   const pinSpan = pitch * (pinsPerSide - 1);
@@ -3519,10 +3552,88 @@ var DFN = ({
     const y = pinSpan / 2 - indexOnSide * pitch;
     const padSizeX = padLength;
     const padSizeY = padWidth;
-    const x = side === "left" ? -bodyWidth / 2 + padSizeX / 2 : bodyWidth / 2 - padSizeX / 2;
+    const x = side === "left" ? -bodyWidth / 2 + padSizeX / 2 + terminalInset : bodyWidth / 2 - padSizeX / 2 - terminalInset;
     const pinNumber = i + 1;
     pinPositions.push({ pinNumber, x, y, padSizeX, padSizeY });
   }
+  if (bodyStyle === "rectangular") {
+    const top = standoff + bodyThickness;
+    const inkThickness = Math.min(bodyThickness, bodyLength10) / 100;
+    const stripe = /* @__PURE__ */ jsx49(
+      Cuboid31,
+      {
+        size: [pin1MarkWidth, bodyLength10 * 0.8, inkThickness],
+        center: [
+          -bodyWidth / 2 + pin1MarkWidth * 1.5,
+          0,
+          top - inkThickness / 2
+        ]
+      }
+    );
+    const body = /* @__PURE__ */ jsx49(
+      Cuboid31,
+      {
+        size: [bodyWidth, bodyLength10, bodyThickness],
+        center: [0, 0, standoff + bodyThickness / 2]
+      }
+    );
+    return /* @__PURE__ */ jsxs45(Fragment45, { children: [
+      /* @__PURE__ */ jsx49(Colorize23, { color: "#25272a", children: pin1MarkWidth > 0 ? /* @__PURE__ */ jsxs45(Subtract4, { children: [
+        body,
+        stripe
+      ] }) : body }),
+      /* @__PURE__ */ jsx49(Colorize23, { color: "#c7c9cd", children: pinPositions.map(
+        (p) => p.pinNumber === 1 && pin1TerminalChamfer > 0 ? /* @__PURE__ */ jsxs45(Hull18, { children: [
+          /* @__PURE__ */ jsx49(
+            Cuboid31,
+            {
+              size: [
+                padLength - pin1TerminalChamfer,
+                padWidth,
+                terminalThickness
+              ],
+              center: [
+                p.x + pin1TerminalChamfer / 2,
+                p.y,
+                terminalThickness / 2
+              ]
+            }
+          ),
+          /* @__PURE__ */ jsx49(
+            Cuboid31,
+            {
+              size: [
+                padLength,
+                padWidth - 2 * pin1TerminalChamfer,
+                terminalThickness
+              ],
+              center: [p.x, p.y, terminalThickness / 2]
+            }
+          )
+        ] }, p.pinNumber) : /* @__PURE__ */ jsx49(
+          Cuboid31,
+          {
+            size: [p.padSizeX, p.padSizeY, terminalThickness],
+            center: [p.x, p.y, terminalThickness / 2]
+          },
+          p.pinNumber
+        )
+      ) }),
+      thermalPadSize && /* @__PURE__ */ jsx49(
+        Cuboid31,
+        {
+          color: "#c7c9cd",
+          size: [
+            thermalPadSize.width,
+            thermalPadSize.length,
+            thermalPadThickness
+          ],
+          center: [0, 0, thermalPadThickness / 2]
+        }
+      ),
+      pin1MarkWidth > 0 && /* @__PURE__ */ jsx49(Colorize23, { color: "#969997", children: stripe })
+    ] });
+  }
   return /* @__PURE__ */ jsxs45(Fragment45, { children: [
     /* @__PURE__ */ jsx49(
       ChipBody,
@@ -3565,7 +3676,7 @@ var DFN = ({
 };
 
 // lib/hc49.tsx
-import { Colorize as Colorize23, Cylinder as Cylinder6, Hull as Hull18, RoundedCylinder } from "jscad-fiber";
+import { Colorize as Colorize24, Cylinder as Cylinder6, Hull as Hull19, RoundedCylinder } from "jscad-fiber";
 import { Fragment as Fragment46, jsx as jsx50, jsxs as jsxs46 } from "react/jsx-runtime";
 var HC49 = ({
   bodyLength: bodyLength10 = 10.2,
@@ -3583,8 +3694,8 @@ var HC49 = ({
   const leadCenterX = leadSpacing / 2;
   const baseHeight = 0.85;
   return /* @__PURE__ */ jsxs46(Fragment46, { children: [
-    /* @__PURE__ */ jsxs46(Colorize23, { color, children: [
-      /* @__PURE__ */ jsxs46(Hull18, { children: [
+    /* @__PURE__ */ jsxs46(Colorize24, { color, children: [
+      /* @__PURE__ */ jsxs46(Hull19, { children: [
         /* @__PURE__ */ jsx50(
           RoundedCylinder,
           {
@@ -3604,7 +3715,7 @@ var HC49 = ({
           }
         )
       ] }),
-      /* @__PURE__ */ jsxs46(Hull18, { children: [
+      /* @__PURE__ */ jsxs46(Hull19, { children: [
         /* @__PURE__ */ jsx50(
           RoundedCylinder,
           {
@@ -3625,7 +3736,7 @@ var HC49 = ({
         )
       ] })
     ] }),
-    /* @__PURE__ */ jsxs46(Colorize23, { color: leadColor, children: [
+    /* @__PURE__ */ jsxs46(Colorize24, { color: leadColor, children: [
       /* @__PURE__ */ jsx50(
         Cylinder6,
         {
@@ -3648,7 +3759,7 @@ var HC49 = ({
 
 // lib/MicroMELF.tsx
 import {
-  Colorize as Colorize24,
+  Colorize as Colorize25,
   Cylinder as Cylinder7,
   RoundedCylinder as RoundedCylinder2,
   Rotate as Rotate8,
@@ -3664,7 +3775,7 @@ var MicroMELF = ({
 }) => {
   const padLength = 0.2;
   return /* @__PURE__ */ jsxs47(Fragment47, { children: [
-    /* @__PURE__ */ jsx51(Colorize24, { color, children: /* @__PURE__ */ jsxs47(Rotate8, { rotation: [0, "90deg", 0], children: [
+    /* @__PURE__ */ jsx51(Colorize25, { color, children: /* @__PURE__ */ jsxs47(Rotate8, { rotation: [0, "90deg", 0], children: [
       /* @__PURE__ */ jsx51(
         RoundedCuboid2,
         {
@@ -3682,7 +3793,7 @@ var MicroMELF = ({
         }
       )
     ] }) }),
-    /* @__PURE__ */ jsx51(Colorize24, { color: cathodeIdentification, children: /* @__PURE__ */ jsx51(Rotate8, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx51(
+    /* @__PURE__ */ jsx51(Colorize25, { color: cathodeIdentification, children: /* @__PURE__ */ jsx51(Rotate8, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx51(
       RoundedCuboid2,
       {
         size: [bodyDiameter * 1.01, bodyDiameter * 1.01, bodyLength10 / 3],
@@ -3690,7 +3801,7 @@ var MicroMELF = ({
         center: [-bodyDiameter / 2, 0, -bodyLength10 / 4 + 0.1]
       }
     ) }) }),
-    /* @__PURE__ */ jsx51(Colorize24, { color: contactColor, children: /* @__PURE__ */ jsx51(Rotate8, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx51(
+    /* @__PURE__ */ jsx51(Colorize25, { color: contactColor, children: /* @__PURE__ */ jsx51(Rotate8, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx51(
       RoundedCylinder2,
       {
         height: padLength,
@@ -3699,7 +3810,7 @@ var MicroMELF = ({
         center: [-bodyDiameter / 2, 0, -bodyLength10 / 2]
       }
     ) }) }),
-    /* @__PURE__ */ jsx51(Colorize24, { color: contactColor, children: /* @__PURE__ */ jsx51(Rotate8, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx51(
+    /* @__PURE__ */ jsx51(Colorize25, { color: contactColor, children: /* @__PURE__ */ jsx51(Rotate8, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx51(
       RoundedCylinder2,
       {
         height: padLength,
@@ -3712,7 +3823,7 @@ var MicroMELF = ({
 };
 
 // lib/MINIMELF.tsx
-import { Colorize as Colorize25, RoundedCylinder as RoundedCylinder3, Rotate as Rotate9 } from "jscad-fiber";
+import { Colorize as Colorize26, RoundedCylinder as RoundedCylinder3, Rotate as Rotate9 } from "jscad-fiber";
 import { Fragment as Fragment48, jsx as jsx52, jsxs as jsxs48 } from "react/jsx-runtime";
 var MINIMELF = ({
   bodyLength: bodyLength10 = 3.5,
@@ -3722,7 +3833,7 @@ var MINIMELF = ({
 }) => {
   const padLength = 0.5;
   return /* @__PURE__ */ jsxs48(Fragment48, { children: [
-    /* @__PURE__ */ jsx52(Colorize25, { color, children: /* @__PURE__ */ jsx52(Rotate9, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx52(
+    /* @__PURE__ */ jsx52(Colorize26, { color, children: /* @__PURE__ */ jsx52(Rotate9, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx52(
       RoundedCylinder3,
       {
         height: bodyLength10,
@@ -3731,7 +3842,7 @@ var MINIMELF = ({
         center: [-bodyDiameter / 2, 0, 0]
       }
     ) }) }),
-    /* @__PURE__ */ jsx52(Colorize25, { color: contactColor, children: /* @__PURE__ */ jsx52(Rotate9, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx52(
+    /* @__PURE__ */ jsx52(Colorize26, { color: contactColor, children: /* @__PURE__ */ jsx52(Rotate9, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx52(
       RoundedCylinder3,
       {
         height: padLength,
@@ -3740,7 +3851,7 @@ var MINIMELF = ({
         center: [-bodyDiameter / 2, 0, -bodyLength10 / 2]
       }
     ) }) }),
-    /* @__PURE__ */ jsx52(Colorize25, { color: contactColor, children: /* @__PURE__ */ jsx52(Rotate9, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx52(
+    /* @__PURE__ */ jsx52(Colorize26, { color: contactColor, children: /* @__PURE__ */ jsx52(Rotate9, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx52(
       RoundedCylinder3,
       {
         height: padLength,
@@ -3753,7 +3864,7 @@ var MINIMELF = ({
 };
 
 // lib/MELF.tsx
-import { Colorize as Colorize26, RoundedCylinder as RoundedCylinder4, Rotate as Rotate10 } from "jscad-fiber";
+import { Colorize as Colorize27, RoundedCylinder as RoundedCylinder4, Rotate as Rotate10 } from "jscad-fiber";
 import { Fragment as Fragment49, jsx as jsx53, jsxs as jsxs49 } from "react/jsx-runtime";
 var MELF = ({
   bodyLength: bodyLength10 = 3.9,
@@ -3763,7 +3874,7 @@ var MELF = ({
 }) => {
   const padLength = 0.55;
   return /* @__PURE__ */ jsxs49(Fragment49, { children: [
-    /* @__PURE__ */ jsx53(Colorize26, { color, children: /* @__PURE__ */ jsx53(Rotate10, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx53(
+    /* @__PURE__ */ jsx53(Colorize27, { color, children: /* @__PURE__ */ jsx53(Rotate10, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx53(
       RoundedCylinder4,
       {
         height: bodyLength10,
@@ -3772,7 +3883,7 @@ var MELF = ({
         center: [-bodyDiameter / 2, 0, 0]
       }
     ) }) }),
-    /* @__PURE__ */ jsx53(Colorize26, { color: contactColor, children: /* @__PURE__ */ jsx53(Rotate10, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx53(
+    /* @__PURE__ */ jsx53(Colorize27, { color: contactColor, children: /* @__PURE__ */ jsx53(Rotate10, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx53(
       RoundedCylinder4,
       {
         height: padLength,
@@ -3781,7 +3892,7 @@ var MELF = ({
         center: [-bodyDiameter / 2, 0, -bodyLength10 / 2]
       }
     ) }) }),
-    /* @__PURE__ */ jsx53(Colorize26, { color: contactColor, children: /* @__PURE__ */ jsx53(Rotate10, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx53(
+    /* @__PURE__ */ jsx53(Colorize27, { color: contactColor, children: /* @__PURE__ */ jsx53(Rotate10, { rotation: [0, "90deg", 0], children: /* @__PURE__ */ jsx53(
       RoundedCylinder4,
       {
         height: padLength,
@@ -3933,11 +4044,11 @@ var MS013 = ({
 
 // lib/TO220.tsx
 import {
-  Colorize as Colorize27,
+  Colorize as Colorize28,
   Cuboid as Cuboid34,
   Cylinder as Cylinder8,
   Rotate as Rotate11,
-  Subtract as Subtract4,
+  Subtract as Subtract5,
   Translate as Translate22
 } from "jscad-fiber";
 import { Fragment as Fragment52, jsx as jsx56, jsxs as jsxs52 } from "react/jsx-runtime";
@@ -3971,14 +4082,14 @@ var TO220 = ({
   const leadWidth = 0.8;
   const leadThickness = 0.5;
   return /* @__PURE__ */ jsxs52(Fragment52, { children: [
-    /* @__PURE__ */ jsx56(Colorize27, { color: bodyColor, children: /* @__PURE__ */ jsx56(
+    /* @__PURE__ */ jsx56(Colorize28, { color: bodyColor, children: /* @__PURE__ */ jsx56(
       Cuboid34,
       {
         size: [bodyWidth, bodyThickness, bodyHeight],
         center: [centerX, centerY, bodyBottom + bodyHeight / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx56(Colorize27, { color: mouldedTab ? bodyColor : tabColor, children: /* @__PURE__ */ jsxs52(Subtract4, { children: [
+    /* @__PURE__ */ jsx56(Colorize28, { color: mouldedTab ? bodyColor : tabColor, children: /* @__PURE__ */ jsxs52(Subtract5, { children: [
       /* @__PURE__ */ jsx56(
         Cuboid34,
         {
@@ -3994,7 +4105,7 @@ var TO220 = ({
         }
       ) }) })
     ] }) }),
-    leads.map((lead) => /* @__PURE__ */ jsx56(Colorize27, { color: leadColor, children: /* @__PURE__ */ jsx56(
+    leads.map((lead) => /* @__PURE__ */ jsx56(Colorize28, { color: leadColor, children: /* @__PURE__ */ jsx56(
       Cuboid34,
       {
         size: [leadWidth, leadThickness, standoff + leadLength],
@@ -4203,12 +4314,12 @@ var SOT963 = () => {
 
 // lib/TO92.tsx
 import {
-  Colorize as Colorize28,
+  Colorize as Colorize29,
   Cuboid as Cuboid36,
-  Hull as Hull19,
+  Hull as Hull20,
   Translate as Translate23,
   Cylinder as Cylinder9,
-  Subtract as Subtract5
+  Subtract as Subtract6
 } from "jscad-fiber";
 import { Fragment as Fragment55, jsx as jsx59, jsxs as jsxs55 } from "react/jsx-runtime";
 var TO92_DEFAULT_LEADS = [
@@ -4270,7 +4381,7 @@ var TO92 = ({
     legThickness
   ];
   return /* @__PURE__ */ jsxs55(Fragment55, { children: [
-    /* @__PURE__ */ jsx59(Colorize28, { color: bodyColor, children: /* @__PURE__ */ jsxs55(Subtract5, { children: [
+    /* @__PURE__ */ jsx59(Colorize29, { color: bodyColor, children: /* @__PURE__ */ jsxs55(Subtract6, { children: [
       /* @__PURE__ */ jsx59(
         Translate23,
         {
@@ -4293,7 +4404,7 @@ var TO92 = ({
     leads.map((lead, index) => {
       const exit = exitFor(index);
       return /* @__PURE__ */ jsxs55(Translate23, { center: [0, 0, 0], children: [
-        /* @__PURE__ */ jsxs55(Hull19, { children: [
+        /* @__PURE__ */ jsxs55(Hull20, { children: [
           /* @__PURE__ */ jsx59(Translate23, { center: [lead.x, lead.y, 0], children: /* @__PURE__ */ jsx59(Cuboid36, { size: leadSize }) }),
           /* @__PURE__ */ jsx59(Translate23, { center: [exit.x, exit.y, standoff], children: /* @__PURE__ */ jsx59(Cuboid36, { size: leadSize }) })
         ] }),
@@ -4496,7 +4607,7 @@ var SOT886 = () => {
 };
 
 // lib/sod-323.tsx
-import { Colorize as Colorize29, Cuboid as Cuboid38 } from "jscad-fiber";
+import { Colorize as Colorize30, Cuboid as Cuboid38 } from "jscad-fiber";
 import { Fragment as Fragment58, jsx as jsx62, jsxs as jsxs58 } from "react/jsx-runtime";
 var SOD323 = () => {
   const fullWidth = 2.5;
@@ -4543,7 +4654,7 @@ var SOD323 = () => {
       },
       1
     ),
-    /* @__PURE__ */ jsx62(Colorize29, { color: "#222", children: /* @__PURE__ */ jsx62(
+    /* @__PURE__ */ jsx62(Colorize30, { color: "#222", children: /* @__PURE__ */ jsx62(
       ChipBody,
       {
         center: { x: 0, y: 0, z: 0 },
@@ -4568,7 +4679,7 @@ var SOD323 = () => {
 };
 
 // lib/sod-323F.tsx
-import { Colorize as Colorize30, Cuboid as Cuboid39, Hull as Hull21, Translate as Translate25, Union as Union17 } from "jscad-fiber";
+import { Colorize as Colorize31, Cuboid as Cuboid39, Hull as Hull22, Translate as Translate25, Union as Union17 } from "jscad-fiber";
 import { Fragment as Fragment59, jsx as jsx63, jsxs as jsxs59 } from "react/jsx-runtime";
 var SOD323F = () => {
   const fullWidth = 1.7;
@@ -4598,9 +4709,9 @@ var SOD323F = () => {
         center: [rightPadCenterX, 0, padThickness / 2]
       }
     ),
-    /* @__PURE__ */ jsx63(Colorize30, { color: "#222", children: /* @__PURE__ */ jsxs59(Union17, { children: [
+    /* @__PURE__ */ jsx63(Colorize31, { color: "#222", children: /* @__PURE__ */ jsxs59(Union17, { children: [
       /* @__PURE__ */ jsx63(Translate25, { z: straightHeight / 2, children: /* @__PURE__ */ jsx63(Cuboid39, { size: [fullWidth, bodyLength10, straightHeight] }) }),
-      /* @__PURE__ */ jsxs59(Hull21, { children: [
+      /* @__PURE__ */ jsxs59(Hull22, { children: [
         /* @__PURE__ */ jsx63(Translate25, { z: straightHeight, children: /* @__PURE__ */ jsx63(Cuboid39, { size: [fullWidth, bodyLength10, 0.01] }) }),
         /* @__PURE__ */ jsx63(Translate25, { z: bodyHeight, children: /* @__PURE__ */ jsx63(
           Cuboid39,
@@ -4622,7 +4733,7 @@ var SOD323F = () => {
 };
 
 // lib/sod-323FL.tsx
-import { Colorize as Colorize31, Cuboid as Cuboid40 } from "jscad-fiber";
+import { Colorize as Colorize32, Cuboid as Cuboid40 } from "jscad-fiber";
 import { Fragment as Fragment60, jsx as jsx64, jsxs as jsxs60 } from "react/jsx-runtime";
 var SOD323FL = () => {
   const fullWidth = 1.775;
@@ -4651,7 +4762,7 @@ var SOD323FL = () => {
         center: [rightPadCenterX, 0, padThickness / 2]
       }
     ),
-    /* @__PURE__ */ jsx64(Colorize31, { color: "#222", children: /* @__PURE__ */ jsx64(
+    /* @__PURE__ */ jsx64(Colorize32, { color: "#222", children: /* @__PURE__ */ jsx64(
       ChipBody,
       {
         width: fullWidth,
@@ -4676,7 +4787,7 @@ var SOD323FL = () => {
 };
 
 // lib/AxialCapacitor.tsx
-import { Colorize as Colorize32, Cylinder as Cylinder10, Rotate as Rotate12, Sphere as Sphere2, Translate as Translate27 } from "jscad-fiber";
+import { Colorize as Colorize33, Cylinder as Cylinder10, Rotate as Rotate12, Sphere as Sphere2, Translate as Translate27 } from "jscad-fiber";
 import { Fragment as Fragment61, jsx as jsx65, jsxs as jsxs61 } from "react/jsx-runtime";
 var AxialCapacitor = ({ pitch = 10 }) => {
   const heightToCenterOfCapacitor = 0.5 + 4 / 2;
@@ -4698,7 +4809,7 @@ var AxialCapacitor = ({ pitch = 10 }) => {
           center: [0, 0, heightToCenterOfCapacitor]
         }
       ),
-      /* @__PURE__ */ jsx65(Colorize32, { color: "#d2b48c", children: /* @__PURE__ */ jsx65(
+      /* @__PURE__ */ jsx65(Colorize33, { color: "#d2b48c", children: /* @__PURE__ */ jsx65(
         Cylinder10,
         {
           height: 5,
@@ -4713,7 +4824,7 @@ var AxialCapacitor = ({ pitch = 10 }) => {
 };
 
 // lib/stampboard.tsx
-import { Colorize as Colorize33, Cuboid as Cuboid41, Cylinder as Cylinder11, Subtract as Subtract6, Union as Union19 } from "jscad-fiber";
+import { Colorize as Colorize34, Cuboid as Cuboid41, Cylinder as Cylinder11, Subtract as Subtract7, Union as Union19 } from "jscad-fiber";
 import { Fragment as Fragment62, jsx as jsx66, jsxs as jsxs62 } from "react/jsx-runtime";
 var StampBoard = ({
   bodyWidth = 21,
@@ -4812,7 +4923,7 @@ var StampBoard = ({
       }
     }
   }
-  const boardBody = /* @__PURE__ */ jsx66(Colorize33, { color: "#051a0a", children: /* @__PURE__ */ jsxs62(Subtract6, { children: [
+  const boardBody = /* @__PURE__ */ jsx66(Colorize34, { color: "#051a0a", children: /* @__PURE__ */ jsxs62(Subtract7, { children: [
     /* @__PURE__ */ jsx66(
       Cuboid41,
       {
@@ -4849,7 +4960,7 @@ var StampBoard = ({
   ));
   return /* @__PURE__ */ jsxs62(Fragment62, { children: [
     boardBody,
-    /* @__PURE__ */ jsx66(Colorize33, { color: "#FFD700", children: innerHoles ? /* @__PURE__ */ jsxs62(Subtract6, { children: [
+    /* @__PURE__ */ jsx66(Colorize34, { color: "#FFD700", children: innerHoles ? /* @__PURE__ */ jsxs62(Subtract7, { children: [
       /* @__PURE__ */ jsx66(Union19, { children: pads.map((pad, index) => /* @__PURE__ */ jsx66(
         Cuboid41,
         {
@@ -4864,10 +4975,10 @@ var StampBoard = ({
 };
 
 // lib/MountedPcbModule.tsx
-import { Colorize as Colorize35, Cuboid as Cuboid43, Cylinder as Cylinder12, Subtract as Subtract8 } from "jscad-fiber";
+import { Colorize as Colorize36, Cuboid as Cuboid43, Cylinder as Cylinder12, Subtract as Subtract9 } from "jscad-fiber";
 
 // lib/Screen.tsx
-import { Colorize as Colorize34, Cuboid as Cuboid42, Subtract as Subtract7, Translate as Translate28 } from "jscad-fiber";
+import { Colorize as Colorize35, Cuboid as Cuboid42, Subtract as Subtract8, Translate as Translate28 } from "jscad-fiber";
 import { jsx as jsx67, jsxs as jsxs63 } from "react/jsx-runtime";
 var Screen = ({
   width: width10 = 30,
@@ -4897,14 +5008,14 @@ var Screen = ({
   const offsetY = offset?.y ?? 0;
   const offsetZ = offset?.z ?? 0;
   return /* @__PURE__ */ jsxs63(Translate28, { offset: { x: offsetX, y: offsetY, z: offsetZ }, children: [
-    backBlockHeight > 0 && /* @__PURE__ */ jsx67(Colorize34, { color: bezelColor, children: /* @__PURE__ */ jsx67(
+    backBlockHeight > 0 && /* @__PURE__ */ jsx67(Colorize35, { color: bezelColor, children: /* @__PURE__ */ jsx67(
       Cuboid42,
       {
         size: [w, h, backBlockHeight],
         offset: [0, 0, backBlockHeight / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx67(Colorize34, { color: bezelColor, children: /* @__PURE__ */ jsxs63(Subtract7, { children: [
+    /* @__PURE__ */ jsx67(Colorize35, { color: bezelColor, children: /* @__PURE__ */ jsxs63(Subtract8, { children: [
       /* @__PURE__ */ jsx67(
         Cuboid42,
         {
@@ -4920,7 +5031,7 @@ var Screen = ({
         }
       )
     ] }) }),
-    /* @__PURE__ */ jsx67(Colorize34, { color: screenColor, children: /* @__PURE__ */ jsx67(
+    /* @__PURE__ */ jsx67(Colorize35, { color: screenColor, children: /* @__PURE__ */ jsx67(
       Cuboid42,
       {
         size: [innerWidth, innerHeight, screenThickness],
@@ -5033,7 +5144,7 @@ var MountedPcbModule = ({
   const shortSidePinLength = 3;
   const boardOffsetZ = nopin || female ? 0 : pinBodyHeight;
   const boardTopZ = boardOffsetZ + boardThickness;
-  const boardBody = /* @__PURE__ */ jsx68(Colorize35, { color: "#008080", children: /* @__PURE__ */ jsxs64(Subtract8, { children: [
+  const boardBody = /* @__PURE__ */ jsx68(Colorize36, { color: "#008080", children: /* @__PURE__ */ jsxs64(Subtract9, { children: [
     /* @__PURE__ */ jsx68(
       Cuboid43,
       {
@@ -5060,7 +5171,7 @@ var MountedPcbModule = ({
       `pin-hole-${index}`
     ))
   ] }) });
-  const platedHoles = pins.map((pin, index) => /* @__PURE__ */ jsx68(Colorize35, { color: "#FFD700", children: /* @__PURE__ */ jsxs64(Subtract8, { children: [
+  const platedHoles = pins.map((pin, index) => /* @__PURE__ */ jsx68(Colorize36, { color: "#FFD700", children: /* @__PURE__ */ jsxs64(Subtract9, { children: [
     /* @__PURE__ */ jsx68(
       Cylinder12,
       {
@@ -5121,7 +5232,7 @@ var MountedPcbModule = ({
 };
 
 // lib/SOD723.tsx
-import { Colorize as Colorize36, Cuboid as Cuboid44, Hull as Hull23, Translate as Translate29, Union as Union20 } from "jscad-fiber";
+import { Colorize as Colorize37, Cuboid as Cuboid44, Hull as Hull24, Translate as Translate29, Union as Union20 } from "jscad-fiber";
 import { Fragment as Fragment64, jsx as jsx69, jsxs as jsxs65 } from "react/jsx-runtime";
 var SOD723 = () => {
   const fullWidth = 1.4;
@@ -5152,9 +5263,9 @@ var SOD723 = () => {
         center: [rightPadCenterX, 0, padThickness / 2]
       }
     ),
-    /* @__PURE__ */ jsx69(Colorize36, { color: "#222", children: /* @__PURE__ */ jsxs65(Union20, { children: [
+    /* @__PURE__ */ jsx69(Colorize37, { color: "#222", children: /* @__PURE__ */ jsxs65(Union20, { children: [
       /* @__PURE__ */ jsx69(Translate29, { z: straightHeight / 2, children: /* @__PURE__ */ jsx69(Cuboid44, { size: [bodyWidth, bodyLength10, straightHeight] }) }),
-      /* @__PURE__ */ jsxs65(Hull23, { children: [
+      /* @__PURE__ */ jsxs65(Hull24, { children: [
         /* @__PURE__ */ jsx69(Translate29, { z: straightHeight, children: /* @__PURE__ */ jsx69(Cuboid44, { size: [bodyWidth, bodyLength10, 0.01] }) }),
         /* @__PURE__ */ jsx69(Translate29, { z: bodyHeight, children: /* @__PURE__ */ jsx69(
           Cuboid44,
@@ -5178,11 +5289,11 @@ var SOD723_default = SOD723;
 
 // lib/JSTZH1_5mm.tsx
 import {
-  Colorize as Colorize37,
+  Colorize as Colorize38,
   Cuboid as Cuboid45,
   Cylinder as Cylinder13,
   Rotate as Rotate13,
-  Subtract as Subtract9,
+  Subtract as Subtract10,
   Translate as Translate30
 } from "jscad-fiber";
 import { Fragment as Fragment65, jsx as jsx70, jsxs as jsxs66 } from "react/jsx-runtime";
@@ -5202,7 +5313,7 @@ var JSTZH1_5mm = ({
   const bodyWidth = (numPins - 1) * pitch + 4;
   const startX = -((numPins - 1) * pitch) / 2;
   return /* @__PURE__ */ jsxs66(Fragment65, { children: [
-    /* @__PURE__ */ jsx70(Translate30, { offset: [0, 0, bodyHeight], children: /* @__PURE__ */ jsx70(Rotate13, { angles: [Math.PI, 0, 0], children: /* @__PURE__ */ jsx70(Colorize37, { color: bodyColor, children: /* @__PURE__ */ jsxs66(Subtract9, { children: [
+    /* @__PURE__ */ jsx70(Translate30, { offset: [0, 0, bodyHeight], children: /* @__PURE__ */ jsx70(Rotate13, { angles: [Math.PI, 0, 0], children: /* @__PURE__ */ jsx70(Colorize38, { color: bodyColor, children: /* @__PURE__ */ jsxs66(Subtract10, { children: [
       /* @__PURE__ */ jsx70(
         Cuboid45,
         {
@@ -5287,7 +5398,7 @@ var JSTZH1_5mm = ({
         }
       )
     ] }) }) }) }),
-    showPins && Array.from({ length: numPins }).map((_, i) => /* @__PURE__ */ jsx70(Colorize37, { color: pinColor, children: /* @__PURE__ */ jsx70(
+    showPins && Array.from({ length: numPins }).map((_, i) => /* @__PURE__ */ jsx70(Colorize38, { color: pinColor, children: /* @__PURE__ */ jsx70(
       Cylinder13,
       {
         height: pinLength,
@@ -5337,11 +5448,11 @@ var JSTZH1_5mm = ({
 
 // lib/JSTPH2_0mm.tsx
 import {
-  Colorize as Colorize38,
+  Colorize as Colorize39,
   Cuboid as Cuboid46,
   Cylinder as Cylinder14,
   Rotate as Rotate14,
-  Subtract as Subtract10,
+  Subtract as Subtract11,
   Translate as Translate31
 } from "jscad-fiber";
 import { Fragment as Fragment66, jsx as jsx71, jsxs as jsxs67 } from "react/jsx-runtime";
@@ -5369,7 +5480,7 @@ var JSTPH2_0mm = ({
   const topReliefWidth = 0.8;
   const topReliefDepth = 0.65;
   return /* @__PURE__ */ jsxs67(Fragment66, { children: [
-    /* @__PURE__ */ jsx71(Translate31, { offset: [0, 0, bodyHeight], children: /* @__PURE__ */ jsx71(Rotate14, { angles: [Math.PI, 0, 0], children: /* @__PURE__ */ jsx71(Colorize38, { color: bodyColor, children: /* @__PURE__ */ jsxs67(Subtract10, { children: [
+    /* @__PURE__ */ jsx71(Translate31, { offset: [0, 0, bodyHeight], children: /* @__PURE__ */ jsx71(Rotate14, { angles: [Math.PI, 0, 0], children: /* @__PURE__ */ jsx71(Colorize39, { color: bodyColor, children: /* @__PURE__ */ jsxs67(Subtract11, { children: [
       /* @__PURE__ */ jsx71(
         Cuboid46,
         {
@@ -5476,7 +5587,7 @@ var JSTPH2_0mm = ({
         }
       ) }) })
     ] }) }) }) }),
-    showPins && Array.from({ length: numPins }).map((_, i) => /* @__PURE__ */ jsx71(Colorize38, { color: pinColor, children: /* @__PURE__ */ jsx71(
+    showPins && Array.from({ length: numPins }).map((_, i) => /* @__PURE__ */ jsx71(Colorize39, { color: pinColor, children: /* @__PURE__ */ jsx71(
       Cuboid46,
       {
         size: [pinThickness, pinThickness, pinLength],
@@ -5524,7 +5635,7 @@ var JSTPH2_0mm = ({
 };
 
 // lib/JSTXH2_5mm.tsx
-import { Colorize as Colorize39, Cuboid as Cuboid47, Subtract as Subtract11, Translate as Translate32 } from "jscad-fiber";
+import { Colorize as Colorize40, Cuboid as Cuboid47, Subtract as Subtract12, Translate as Translate32 } from "jscad-fiber";
 import { fp as fp3 } from "@tscircuit/footprinter";
 import { Fragment as Fragment67, jsx as jsx72, jsxs as jsxs68 } from "react/jsx-runtime";
 var JSTXH2_5mm = ({
@@ -5555,7 +5666,7 @@ var JSTXH2_5mm = ({
   );
   const lockNotchHeight = 2.4;
   return /* @__PURE__ */ jsxs68(Fragment67, { children: [
-    /* @__PURE__ */ jsx72(Translate32, { offset: [0, 0, bodyHeight / 2], children: /* @__PURE__ */ jsx72(Colorize39, { color: bodyColor, children: /* @__PURE__ */ jsxs68(Subtract11, { children: [
+    /* @__PURE__ */ jsx72(Translate32, { offset: [0, 0, bodyHeight / 2], children: /* @__PURE__ */ jsx72(Colorize40, { color: bodyColor, children: /* @__PURE__ */ jsxs68(Subtract12, { children: [
       /* @__PURE__ */ jsx72(Cuboid47, { size: [bodyWidth, bodyDepth, bodyHeight] }),
       /* @__PURE__ */ jsx72(Translate32, { offset: [0, 0, (bodyHeight - hollowHeight) / 2 + 0.1], children: /* @__PURE__ */ jsx72(
         Cuboid47,
@@ -5632,7 +5743,7 @@ var JSTXH2_5mm = ({
         `vent_${i}`
       ))
     ] }) }) }),
-    showPins && Array.from({ length: numPins }).map((_, i) => /* @__PURE__ */ jsx72(Colorize39, { color: pinColor, children: /* @__PURE__ */ jsx72(Translate32, { offset: [startX + i * pitch, 0, pinLength / 2 - 3.4], children: /* @__PURE__ */ jsx72(Cuboid47, { size: [0.64, 0.64, pinLength] }) }) }, i)),
+    showPins && Array.from({ length: numPins }).map((_, i) => /* @__PURE__ */ jsx72(Colorize40, { color: pinColor, children: /* @__PURE__ */ jsx72(Translate32, { offset: [startX + i * pitch, 0, pinLength / 2 - 3.4], children: /* @__PURE__ */ jsx72(Cuboid47, { size: [0.64, 0.64, pinLength] }) }) }, i)),
     showFootprint && (() => {
       try {
         const circuitJson = fp3.string(`jst${numPins}_xh`).circuitJson();
@@ -5657,7 +5768,7 @@ var JSTXH2_5mm = ({
 // lib/JstSh.tsx
 import { fp as fp4 } from "@tscircuit/footprinter";
 import { mm } from "@tscircuit/mm";
-import { Colorize as Colorize40, Cuboid as Cuboid48, Rotate as Rotate15, Subtract as Subtract12, Union as Union21 } from "jscad-fiber";
+import { Colorize as Colorize41, Cuboid as Cuboid48, Rotate as Rotate15, Subtract as Subtract13, Union as Union21 } from "jscad-fiber";
 import { jsx as jsx73, jsxs as jsxs69 } from "react/jsx-runtime";
 function isJstShFootprint(footprint) {
   const p = fp4.string(footprint).json();
@@ -5687,7 +5798,7 @@ var JstSh = ({ footprint = "jst6_sh" }) => {
   const y = rowY + direction * 1.8, width10 = n + 2, depth = 2.9, height10 = 4.2;
   const pinY = y - direction * 0.25;
   return /* @__PURE__ */ jsxs69(Rotate15, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx73(Colorize40, { color: "#e4e1d6", children: /* @__PURE__ */ jsxs69(Subtract12, { children: [
+    /* @__PURE__ */ jsx73(Colorize41, { color: "#e4e1d6", children: /* @__PURE__ */ jsxs69(Subtract13, { children: [
       /* @__PURE__ */ jsx73(
         Cuboid48,
         {
@@ -5723,7 +5834,7 @@ var JstSh = ({ footprint = "jst6_sh" }) => {
         side
       ))
     ] }) }),
-    /* @__PURE__ */ jsxs69(Colorize40, { color: "#c6c7c9", children: [
+    /* @__PURE__ */ jsxs69(Colorize41, { color: "#c6c7c9", children: [
       signals.map((pad, i) => {
         const tailY = pad.y - direction * pad.height * 0.4;
         return /* @__PURE__ */ jsxs69(Union21, { children: [
@@ -5759,12 +5870,12 @@ var JstSh = ({ footprint = "jst6_sh" }) => {
 
 // lib/FPC.tsx
 import {
-  Colorize as Colorize41,
+  Colorize as Colorize42,
   Cuboid as Cuboid49,
   Cylinder as Cylinder15,
   Rotate as Rotate16,
   RoundedCuboid as RoundedCuboid3,
-  Subtract as Subtract13,
+  Subtract as Subtract14,
   Translate as Translate33
 } from "jscad-fiber";
 import { Fragment as Fragment68, jsx as jsx74, jsxs as jsxs70 } from "react/jsx-runtime";
@@ -5882,7 +5993,7 @@ var FPC = ({
         roundRadius: 0.1
       }
     ),
-    /* @__PURE__ */ jsx74(Colorize41, { color: HOUSING_COLOR, children: /* @__PURE__ */ jsxs70(Subtract13, { children: [
+    /* @__PURE__ */ jsx74(Colorize42, { color: HOUSING_COLOR, children: /* @__PURE__ */ jsxs70(Subtract14, { children: [
       /* @__PURE__ */ jsx74(
         RoundedCuboid3,
         {
@@ -6033,7 +6144,7 @@ var FPC = ({
 };
 
 // lib/SmdPinHeader.tsx
-import { Colorize as Colorize42, Cuboid as Cuboid50, Hull as Hull24, Translate as Translate34 } from "jscad-fiber";
+import { Colorize as Colorize43, Cuboid as Cuboid50, Hull as Hull25, Translate as Translate34 } from "jscad-fiber";
 import { Fragment as Fragment69, jsx as jsx75, jsxs as jsxs71 } from "react/jsx-runtime";
 var SmdPinHeader = ({
   numberOfPins,
@@ -6063,7 +6174,7 @@ var SmdPinHeader = ({
           center: [0, 0, standoffHeight + bodyHeight / 2]
         }
       ),
-      /* @__PURE__ */ jsxs71(Colorize42, { color: "#d4af37", children: [
+      /* @__PURE__ */ jsxs71(Colorize43, { color: "#d4af37", children: [
         /* @__PURE__ */ jsx75(
           Cuboid50,
           {
@@ -6085,7 +6196,7 @@ var SmdPinHeader = ({
             center: [0, 0, bodyTop + postBodyLength / 2]
           }
         ),
-        /* @__PURE__ */ jsxs71(Hull24, { children: [
+        /* @__PURE__ */ jsxs71(Hull25, { children: [
           /* @__PURE__ */ jsx75(
             Cuboid50,
             {
@@ -6231,11 +6342,11 @@ var ParametricChip = ({
 
 // lib/Led5050.tsx
 import {
-  Colorize as Colorize43,
+  Colorize as Colorize44,
   Cuboid as Cuboid52,
   Cylinder as Cylinder16,
   Rotate as Rotate17,
-  Subtract as Subtract14,
+  Subtract as Subtract15,
   Translate as Translate35
 } from "jscad-fiber";
 import { Fragment as Fragment72, jsx as jsx78, jsxs as jsxs74 } from "react/jsx-runtime";
@@ -6271,7 +6382,7 @@ var Led5050 = ({
         `${side}-${y}`
       ))
     ),
-    /* @__PURE__ */ jsx78(Colorize43, { color: bodyColor, children: /* @__PURE__ */ jsxs74(Subtract14, { children: [
+    /* @__PURE__ */ jsx78(Colorize44, { color: bodyColor, children: /* @__PURE__ */ jsxs74(Subtract15, { children: [
       /* @__PURE__ */ jsx78(
         ChipBody,
         {
@@ -6319,7 +6430,7 @@ var Led5050 = ({
 };
 
 // lib/Led2835.tsx
-import { Colorize as Colorize44, Cuboid as Cuboid53 } from "jscad-fiber";
+import { Colorize as Colorize45, Cuboid as Cuboid53 } from "jscad-fiber";
 import { Fragment as Fragment73, jsx as jsx79, jsxs as jsxs75 } from "react/jsx-runtime";
 var Led2835 = ({
   bodyWidth = 3.5,
@@ -6343,21 +6454,21 @@ var Led2835 = ({
     [
       { x: pad1X, w: pad1Width, key: "pad-1" },
       { x: pad2X, w: pad2Width, key: "pad-2" }
-    ].map(({ x, w, key }) => /* @__PURE__ */ jsx79(Colorize44, { color: padColor, children: /* @__PURE__ */ jsx79(
+    ].map(({ x, w, key }) => /* @__PURE__ */ jsx79(Colorize45, { color: padColor, children: /* @__PURE__ */ jsx79(
       Cuboid53,
       {
         size: [w, padLength, padThickness],
         center: [x, 0, padThickness / 2]
       }
     ) }, key)),
-    /* @__PURE__ */ jsx79(Colorize44, { color: bodyColor, children: /* @__PURE__ */ jsx79(
+    /* @__PURE__ */ jsx79(Colorize45, { color: bodyColor, children: /* @__PURE__ */ jsx79(
       Cuboid53,
       {
         size: [bodyWidth, bodyLength10, bodyHeight],
         center: [bodyCenterX, 0, padThickness + bodyHeight / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx79(Colorize44, { color, children: /* @__PURE__ */ jsx79(
+    /* @__PURE__ */ jsx79(Colorize45, { color, children: /* @__PURE__ */ jsx79(
       Cuboid53,
       {
         size: [lensWidth, lensLength, lensHeight],
@@ -6373,12 +6484,12 @@ var Led2835 = ({
 
 // lib/RJ45.tsx
 import {
-  Colorize as Colorize45,
+  Colorize as Colorize46,
   Cuboid as Cuboid54,
   Cylinder as Cylinder17,
   Rotate as Rotate18,
   RoundedCuboid as RoundedCuboid4,
-  Subtract as Subtract15,
+  Subtract as Subtract16,
   Translate as Translate36
 } from "jscad-fiber";
 import { Fragment as Fragment74, jsx as jsx80, jsxs as jsxs76 } from "react/jsx-runtime";
@@ -6440,8 +6551,8 @@ var RJ45 = ({
   const contactZ = openingCenterZ + openingHeight * 0.18;
   const frontLipY = frontY + frontDirection * shellThickness * 0.2;
   return /* @__PURE__ */ jsxs76(Fragment74, { children: [
-    /* @__PURE__ */ jsxs76(Colorize45, { color: shellColor, children: [
-      /* @__PURE__ */ jsxs76(Subtract15, { children: [
+    /* @__PURE__ */ jsxs76(Colorize46, { color: shellColor, children: [
+      /* @__PURE__ */ jsxs76(Subtract16, { children: [
         /* @__PURE__ */ jsx80(
           Cuboid54,
           {
@@ -6493,8 +6604,8 @@ var RJ45 = ({
         `top-seam:${direction}`
       ))
     ] }),
-    /* @__PURE__ */ jsxs76(Colorize45, { color: housingColor, children: [
-      /* @__PURE__ */ jsxs76(Subtract15, { children: [
+    /* @__PURE__ */ jsxs76(Colorize46, { color: housingColor, children: [
+      /* @__PURE__ */ jsxs76(Subtract16, { children: [
         /* @__PURE__ */ jsx80(
           RoundedCuboid4,
           {
@@ -6548,7 +6659,7 @@ var RJ45 = ({
         `locator:${direction}`
       ))
     ] }),
-    /* @__PURE__ */ jsxs76(Colorize45, { color: contactColor, children: [
+    /* @__PURE__ */ jsxs76(Colorize46, { color: contactColor, children: [
       signalPinPositions.map(({ x, y }, index) => /* @__PURE__ */ jsx80(
         Cylinder17,
         {
@@ -6618,7 +6729,7 @@ var RJ45 = ({
 };
 
 // lib/DPAK.tsx
-import { Colorize as Colorize46, Cuboid as Cuboid55, Hull as Hull25 } from "jscad-fiber";
+import { Colorize as Colorize47, Cuboid as Cuboid55, Hull as Hull26 } from "jscad-fiber";
 import { Fragment as Fragment75, jsx as jsx81, jsxs as jsxs77 } from "react/jsx-runtime";
 var DPAK = ({
   bodyWidth = 6.1,
@@ -6642,14 +6753,14 @@ var DPAK = ({
   const leadZ = tabThickness / 2;
   const leadThickness = 0.4;
   return /* @__PURE__ */ jsxs77(Fragment75, { children: [
-    /* @__PURE__ */ jsx81(Colorize46, { color: tabColor, children: /* @__PURE__ */ jsx81(
+    /* @__PURE__ */ jsx81(Colorize47, { color: tabColor, children: /* @__PURE__ */ jsx81(
       Cuboid55,
       {
         size: [tabWidth, tabLength, tabThickness],
         center: [tabCenterX, 0, tabThickness / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx81(Colorize46, { color, children: /* @__PURE__ */ jsx81(
+    /* @__PURE__ */ jsx81(Colorize47, { color, children: /* @__PURE__ */ jsx81(
       Cuboid55,
       {
         size: [bodyWidth, bodyLength10, bodyHeight],
@@ -6657,7 +6768,7 @@ var DPAK = ({
       }
     ) }),
     [-1, 1].map((side) => {
-      return /* @__PURE__ */ jsxs77(Colorize46, { color: leadColor, children: [
+      return /* @__PURE__ */ jsxs77(Colorize47, { color: leadColor, children: [
         /* @__PURE__ */ jsx81(
           Cuboid55,
           {
@@ -6669,7 +6780,7 @@ var DPAK = ({
             ]
           }
         ),
-        /* @__PURE__ */ jsxs77(Hull25, { children: [
+        /* @__PURE__ */ jsxs77(Hull26, { children: [
           /* @__PURE__ */ jsx81(
             Cuboid55,
             {
@@ -6696,11 +6807,11 @@ var DPAK = ({
 
 // lib/ElectrolyticCapacitor.tsx
 import {
-  Colorize as Colorize47,
+  Colorize as Colorize48,
   Cuboid as Cuboid56,
   Cylinder as Cylinder18,
   RoundedCylinder as RoundedCylinder5,
-  Subtract as Subtract16
+  Subtract as Subtract17
 } from "jscad-fiber";
 import { Fragment as Fragment76, jsx as jsx82, jsxs as jsxs78 } from "react/jsx-runtime";
 var ElectrolyticCapacitor = ({
@@ -6721,7 +6832,7 @@ var ElectrolyticCapacitor = ({
   const grooveWidth = Math.max(diameter * 0.06, 0.2);
   const grooveDepth = 0.3;
   return /* @__PURE__ */ jsxs78(Fragment76, { children: [
-    /* @__PURE__ */ jsx82(Colorize47, { color: baseColor, children: /* @__PURE__ */ jsx82(
+    /* @__PURE__ */ jsx82(Colorize48, { color: baseColor, children: /* @__PURE__ */ jsx82(
       Cylinder18,
       {
         radius: radius - 0.05,
@@ -6729,7 +6840,7 @@ var ElectrolyticCapacitor = ({
         center: [0, 0, baseHeight / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx82(Colorize47, { color: sleeveColor, children: /* @__PURE__ */ jsxs78(Subtract16, { children: [
+    /* @__PURE__ */ jsx82(Colorize48, { color: sleeveColor, children: /* @__PURE__ */ jsxs78(Subtract17, { children: [
       /* @__PURE__ */ jsx82(
         RoundedCylinder5,
         {
@@ -6754,7 +6865,7 @@ var ElectrolyticCapacitor = ({
         }
       )
     ] }) }),
-    [-1, 1].map((side) => /* @__PURE__ */ jsx82(Colorize47, { color: "#c0c0c0", children: /* @__PURE__ */ jsx82(
+    [-1, 1].map((side) => /* @__PURE__ */ jsx82(Colorize48, { color: "#c0c0c0", children: /* @__PURE__ */ jsx82(
       Cylinder18,
       {
         radius: leadDiameter / 2,
@@ -6766,7 +6877,7 @@ var ElectrolyticCapacitor = ({
 };
 
 // lib/Potentiometer.tsx
-import { Colorize as Colorize48, Cuboid as Cuboid57, Cylinder as Cylinder19, Subtract as Subtract17 } from "jscad-fiber";
+import { Colorize as Colorize49, Cuboid as Cuboid57, Cylinder as Cylinder19, Subtract as Subtract18 } from "jscad-fiber";
 import { Fragment as Fragment77, jsx as jsx83, jsxs as jsxs79 } from "react/jsx-runtime";
 var Potentiometer = ({
   bodyWidth = 5.35,
@@ -6786,14 +6897,14 @@ var Potentiometer = ({
   const adjusterZ = bodyHeight + adjusterHeight / 2;
   const slotWidth = Math.max(adjusterDiameter * 0.16, 0.3);
   return /* @__PURE__ */ jsxs79(Fragment77, { children: [
-    /* @__PURE__ */ jsx83(Colorize48, { color: bodyColor, children: /* @__PURE__ */ jsx83(
+    /* @__PURE__ */ jsx83(Colorize49, { color: bodyColor, children: /* @__PURE__ */ jsx83(
       Cuboid57,
       {
         size: [bodyWidth, bodyLength10, bodyHeight],
         center: [bodyCenterX, 0, bodyHeight / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx83(Colorize48, { color: adjusterColor, children: /* @__PURE__ */ jsxs79(Subtract17, { children: [
+    /* @__PURE__ */ jsx83(Colorize49, { color: adjusterColor, children: /* @__PURE__ */ jsxs79(Subtract18, { children: [
       /* @__PURE__ */ jsx83(
         Cylinder19,
         {
@@ -6810,7 +6921,7 @@ var Potentiometer = ({
         }
       )
     ] }) }),
-    shaftHeight > 0 && shaftDiameter > 0 ? /* @__PURE__ */ jsx83(Colorize48, { color: adjusterColor, children: /* @__PURE__ */ jsx83(
+    shaftHeight > 0 && shaftDiameter > 0 ? /* @__PURE__ */ jsx83(Colorize49, { color: adjusterColor, children: /* @__PURE__ */ jsx83(
       Cylinder19,
       {
         radius: shaftDiameter / 2,
@@ -6818,7 +6929,7 @@ var Potentiometer = ({
         center: [bodyCenterX, 0, bodyHeight + shaftHeight / 2]
       }
     ) }) : null,
-    leads.map((lead) => /* @__PURE__ */ jsx83(Colorize48, { color: "#c0c0c0", children: /* @__PURE__ */ jsx83(
+    leads.map((lead) => /* @__PURE__ */ jsx83(Colorize49, { color: "#c0c0c0", children: /* @__PURE__ */ jsx83(
       Cylinder19,
       {
         radius: leadDiameter / 2,
@@ -6830,7 +6941,7 @@ var Potentiometer = ({
 };
 
 // lib/SmdPushButton.tsx
-import { Colorize as Colorize49, Cuboid as Cuboid58, Cylinder as Cylinder20 } from "jscad-fiber";
+import { Colorize as Colorize50, Cuboid as Cuboid58, Cylinder as Cylinder20 } from "jscad-fiber";
 import { Fragment as Fragment78, jsx as jsx84, jsxs as jsxs80 } from "react/jsx-runtime";
 var SmdPushButton = ({
   bodyWidth = 2.9,
@@ -6848,14 +6959,14 @@ var SmdPushButton = ({
 }) => {
   const leadThickness = 0.15;
   return /* @__PURE__ */ jsxs80(Fragment78, { children: [
-    /* @__PURE__ */ jsx84(Colorize49, { color: bodyColor, children: /* @__PURE__ */ jsx84(
+    /* @__PURE__ */ jsx84(Colorize50, { color: bodyColor, children: /* @__PURE__ */ jsx84(
       Cuboid58,
       {
         size: [bodyWidth, bodyLength10, bodyHeight],
         center: [0, 0, bodyHeight / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx84(Colorize49, { color: actuatorColor, children: /* @__PURE__ */ jsx84(
+    /* @__PURE__ */ jsx84(Colorize50, { color: actuatorColor, children: /* @__PURE__ */ jsx84(
       Cylinder20,
       {
         radius: actuatorDiameter / 2,
@@ -6864,7 +6975,7 @@ var SmdPushButton = ({
       }
     ) }),
     [-1, 1].flatMap(
-      (sx) => [-1, 1].map((sy) => /* @__PURE__ */ jsx84(Colorize49, { color: leadColor, children: /* @__PURE__ */ jsx84(
+      (sx) => [-1, 1].map((sy) => /* @__PURE__ */ jsx84(Colorize50, { color: leadColor, children: /* @__PURE__ */ jsx84(
         Cuboid58,
         {
           size: [padWidth, padLength, leadThickness],
@@ -6881,7 +6992,7 @@ var SmdPushButton = ({
 
 // lib/SmdSlideSwitch.tsx
 import { fp as fp7 } from "@tscircuit/footprinter";
-import { Colorize as Colorize50, Cuboid as Cuboid59, Cylinder as Cylinder21, Rotate as Rotate19, Subtract as Subtract18 } from "jscad-fiber";
+import { Colorize as Colorize51, Cuboid as Cuboid59, Cylinder as Cylinder21, Rotate as Rotate19, Subtract as Subtract19 } from "jscad-fiber";
 import { jsx as jsx85, jsxs as jsxs81 } from "react/jsx-runtime";
 var SmdSlideSwitch = ({
   footprint = "smdslideswitch7",
@@ -6901,7 +7012,7 @@ var SmdSlideSwitch = ({
   const angle = Math.atan2(target[1].y - target[0].y, target[1].x - target[0].x) - Math.atan2(pads[1].y - pads[0].y, pads[1].x - pads[0].x);
   const width10 = params.mpx - 0.5, depth = 2.7, height10 = params.mpx > 6 ? 1.5 : 1.4, y = params.mounty;
   return /* @__PURE__ */ jsxs81(Rotate19, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx85(Colorize50, { color: "#aeb4ba", children: /* @__PURE__ */ jsxs81(Subtract18, { children: [
+    /* @__PURE__ */ jsx85(Colorize51, { color: "#aeb4ba", children: /* @__PURE__ */ jsxs81(Subtract19, { children: [
       /* @__PURE__ */ jsx85(Cuboid59, { size: [width10, depth, height10], center: [0, y, height10 / 2] }),
       /* @__PURE__ */ jsx85(
         Cuboid59,
@@ -6912,7 +7023,7 @@ var SmdSlideSwitch = ({
       ),
       /* @__PURE__ */ jsx85(Cuboid59, { size: [2.7, 0.5, 0.9], center: [0, y - depth / 2, 0.65] })
     ] }) }),
-    /* @__PURE__ */ jsxs81(Colorize50, { color: "#28292c", children: [
+    /* @__PURE__ */ jsxs81(Colorize51, { color: "#28292c", children: [
       /* @__PURE__ */ jsx85(
         Cuboid59,
         {
@@ -6939,7 +7050,7 @@ var SmdSlideSwitch = ({
         ) : null
       )
     ] }),
-    /* @__PURE__ */ jsx85(Colorize50, { color: "#c6c7c9", children: pads.map((pad, i) => {
+    /* @__PURE__ */ jsx85(Colorize51, { color: "#c6c7c9", children: pads.map((pad, i) => {
       const signal = i < pads.length - 4;
       const outerY = pad.y + pad.height * 0.4;
       const innerY = Math.min(pad.y - pad.height * 0.4, y + depth / 2 - 0.2);
@@ -6960,7 +7071,7 @@ var SmdSlideSwitch = ({
 };
 
 // lib/SOT-563.tsx
-import { Cuboid as Cuboid60, Translate as Translate38, Rotate as Rotate20, Colorize as Colorize51 } from "jscad-fiber";
+import { Cuboid as Cuboid60, Translate as Translate38, Rotate as Rotate20, Colorize as Colorize52 } from "jscad-fiber";
 import { Fragment as Fragment79, jsx as jsx86, jsxs as jsxs82 } from "react/jsx-runtime";
 var SOT563 = ({ fullWidth = 1.94, fullLength: fullLength10 = 1.6 }) => {
   const bodyWidth = 1.2;
@@ -6972,7 +7083,7 @@ var SOT563 = ({ fullWidth = 1.94, fullLength: fullLength10 = 1.6 }) => {
   const leadSpacing = 0.5;
   const bodyZOffset = -0.4;
   return /* @__PURE__ */ jsxs82(Fragment79, { children: [
-    /* @__PURE__ */ jsx86(Rotate20, { rotation: [45 * Math.PI, 0, 0], children: /* @__PURE__ */ jsx86(Translate38, { center: [0, 0, bodyZOffset], children: /* @__PURE__ */ jsx86(Colorize51, { color: "grey", children: /* @__PURE__ */ jsx86(Cuboid60, { size: [bodyWidth, bodyLength10, bodyHeight] }) }) }) }),
+    /* @__PURE__ */ jsx86(Rotate20, { rotation: [45 * Math.PI, 0, 0], children: /* @__PURE__ */ jsx86(Translate38, { center: [0, 0, bodyZOffset], children: /* @__PURE__ */ jsx86(Colorize52, { color: "grey", children: /* @__PURE__ */ jsx86(Cuboid60, { size: [bodyWidth, bodyLength10, bodyHeight] }) }) }) }),
     [-1, 0, 1].flatMap((yOffset, index) => [
       // Left lead
       /* @__PURE__ */ jsx86(
@@ -7003,12 +7114,12 @@ var SOT563 = ({ fullWidth = 1.94, fullLength: fullLength10 = 1.6 }) => {
 // lib/UsbCMidmount.tsx
 import { fp as fp8 } from "@tscircuit/footprinter";
 import {
-  Colorize as Colorize52,
+  Colorize as Colorize53,
   Cuboid as Cuboid61,
   Cylinder as Cylinder22,
-  Hull as Hull26,
+  Hull as Hull27,
   Rotate as Rotate21,
-  Subtract as Subtract19,
+  Subtract as Subtract20,
   Translate as Translate39
 } from "jscad-fiber";
 import { jsx as jsx87, jsxs as jsxs83 } from "react/jsx-runtime";
@@ -7016,7 +7127,7 @@ var Capsule = ({
   width: width10,
   height: height10,
   depth
-}) => /* @__PURE__ */ jsx87(Hull26, { children: [-1, 1].map((side) => /* @__PURE__ */ jsx87(Translate39, { offset: [side * (width10 - height10) / 2, 0, 0], children: /* @__PURE__ */ jsx87(Rotate21, { rotation: [Math.PI / 2, 0, 0], children: /* @__PURE__ */ jsx87(Cylinder22, { radius: height10 / 2, height: depth }) }) }, side)) });
+}) => /* @__PURE__ */ jsx87(Hull27, { children: [-1, 1].map((side) => /* @__PURE__ */ jsx87(Translate39, { offset: [side * (width10 - height10) / 2, 0, 0], children: /* @__PURE__ */ jsx87(Rotate21, { rotation: [Math.PI / 2, 0, 0], children: /* @__PURE__ */ jsx87(Cylinder22, { radius: height10 / 2, height: depth }) }) }, side)) });
 var UsbCMidmount = ({
   footprint = "usbcmidmount16"
 }) => {
@@ -7040,7 +7151,7 @@ var UsbCMidmount = ({
     );
   const tabBottom = -0.9, tabTop = centerZ + 0.1;
   return /* @__PURE__ */ jsxs83(Rotate21, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx87(Colorize52, { color: "#b8bdc4", children: /* @__PURE__ */ jsx87(Translate39, { offset: [0, centerY, centerZ], children: /* @__PURE__ */ jsxs83(Subtract19, { children: [
+    /* @__PURE__ */ jsx87(Colorize53, { color: "#b8bdc4", children: /* @__PURE__ */ jsx87(Translate39, { offset: [0, centerY, centerZ], children: /* @__PURE__ */ jsxs83(Subtract20, { children: [
       /* @__PURE__ */ jsx87(Capsule, { width: width10, height: height10, depth }),
       /* @__PURE__ */ jsx87(
         Capsule,
@@ -7051,7 +7162,7 @@ var UsbCMidmount = ({
         }
       )
     ] }) }) }),
-    /* @__PURE__ */ jsxs83(Colorize52, { color: "#242529", children: [
+    /* @__PURE__ */ jsxs83(Colorize53, { color: "#242529", children: [
       /* @__PURE__ */ jsx87(
         Cuboid61,
         {
@@ -7072,7 +7183,7 @@ var UsbCMidmount = ({
         ) : null
       )
     ] }),
-    /* @__PURE__ */ jsxs83(Colorize52, { color: "#d3ad57", children: [
+    /* @__PURE__ */ jsxs83(Colorize53, { color: "#d3ad57", children: [
       [-1, 1].flatMap(
         (side) => [-2.75, -2.25, -1.25, -0.25, 0.25, 1.25, 2.25, 2.75].map((x) => /* @__PURE__ */ jsx87(
           Cuboid61,
@@ -7096,7 +7207,7 @@ var UsbCMidmount = ({
         i
       ))
     ] }),
-    /* @__PURE__ */ jsx87(Colorize52, { color: "#b8bdc4", children: slots.map((slot, i) => /* @__PURE__ */ jsx87(
+    /* @__PURE__ */ jsx87(Colorize53, { color: "#b8bdc4", children: slots.map((slot, i) => /* @__PURE__ */ jsx87(
       Cuboid61,
       {
         size: [
@@ -7167,7 +7278,7 @@ var SOT143 = ({ footprint = "sot143" }) => {
 };
 
 // lib/FlexScreen.tsx
-import { Colorize as Colorize53, Rotate as Rotate23, RoundedCuboid as RoundedCuboid5, Translate as Translate40 } from "jscad-fiber";
+import { Colorize as Colorize54, Rotate as Rotate23, RoundedCuboid as RoundedCuboid5, Translate as Translate40 } from "jscad-fiber";
 import { Fragment as Fragment80 } from "react";
 import { Fragment as Fragment81, jsx as jsx89, jsxs as jsxs85 } from "react/jsx-runtime";
 var DEFAULT_ASPECT_RATIO = 16 / 9;
@@ -7399,7 +7510,7 @@ var CableStrip = ({
   acrossOffset = 0,
   normalOffset = 0,
   overlap = 0.03
-}) => /* @__PURE__ */ jsx89(Colorize53, { color, children: points.slice(1).map((point, index) => {
+}) => /* @__PURE__ */ jsx89(Colorize54, { color, children: points.slice(1).map((point, index) => {
   const previous = points[index];
   const dx = point[0] - previous[0];
   const dy = point[1] - previous[1];
@@ -8374,10 +8485,121 @@ var Footprinter3d = ({ footprint }) => {
   return null;
 };
 
+// lib/utils/FlatLeadDiode.tsx
+import { Colorize as Colorize55, Cuboid as Cuboid63, Hull as Hull28, Subtract as Subtract21 } from "jscad-fiber";
+import { Fragment as Fragment83, jsx as jsx91, jsxs as jsxs86 } from "react/jsx-runtime";
+function createFlatLeadDiode(p) {
+  const dimensions = [
+    "bodyLength",
+    "bodyWidth",
+    "bodyHeight",
+    "leadSpan",
+    "cathodeLength",
+    "cathodeWidth",
+    "anodeLength",
+    "anodeWidth",
+    "terminalThickness",
+    "standoff",
+    "taperInset",
+    "markingWidth"
+  ];
+  for (const name of dimensions) {
+    const value = p[name];
+    const allowZero = ["standoff", "taperInset", "markingWidth"].includes(name);
+    if (!Number.isFinite(value) || (allowZero ? value < 0 : value <= 0))
+      throw new Error(`Invalid diode dimension: ${name}`);
+  }
+  const overhang = (p.leadSpan - p.bodyLength) / 2;
+  if (overhang < 0 || p.cathodeLength <= overhang || p.anodeLength <= overhang || p.cathodeLength + p.anodeLength >= p.leadSpan || p.cathodeWidth > p.bodyWidth || p.anodeWidth > p.bodyWidth || p.standoff >= p.terminalThickness || p.terminalThickness >= p.bodyHeight || p.taperInset * 2 >= Math.min(p.bodyLength, p.bodyWidth) || p.markingWidth * 2 >= p.bodyLength - p.taperInset * 2)
+    throw new Error(
+      "Diode dimensions leave disconnected terminals or an invalid mold"
+    );
+  const slice = Math.min(p.bodyHeight - p.standoff, p.bodyWidth) / 100;
+  const body = /* @__PURE__ */ jsxs86(Hull28, { children: [
+    /* @__PURE__ */ jsx91(
+      Cuboid63,
+      {
+        size: [p.bodyLength, p.bodyWidth, slice],
+        center: [0, 0, p.standoff + slice / 2]
+      }
+    ),
+    /* @__PURE__ */ jsx91(
+      Cuboid63,
+      {
+        size: [
+          p.bodyLength - p.taperInset * 2,
+          p.bodyWidth - p.taperInset * 2,
+          slice
+        ],
+        center: [0, 0, p.bodyHeight - slice / 2]
+      }
+    )
+  ] });
+  const stripe = /* @__PURE__ */ jsx91(
+    Cuboid63,
+    {
+      size: [p.markingWidth, (p.bodyWidth - p.taperInset * 2) * 0.9, slice],
+      center: [
+        -p.bodyLength / 2 + p.taperInset + p.markingWidth,
+        0,
+        p.bodyHeight - slice / 2
+      ]
+    }
+  );
+  return /* @__PURE__ */ jsxs86(Fragment83, { children: [
+    /* @__PURE__ */ jsx91(Colorize55, { color: "#25272a", children: p.markingWidth > 0 ? /* @__PURE__ */ jsxs86(Subtract21, { children: [
+      body,
+      stripe
+    ] }) : body }),
+    /* @__PURE__ */ jsxs86(Colorize55, { color: "#c7c9cd", children: [
+      /* @__PURE__ */ jsx91(
+        Cuboid63,
+        {
+          size: [p.cathodeLength, p.cathodeWidth, p.terminalThickness],
+          center: [
+            -p.leadSpan / 2 + p.cathodeLength / 2,
+            0,
+            p.terminalThickness / 2
+          ]
+        }
+      ),
+      /* @__PURE__ */ jsx91(
+        Cuboid63,
+        {
+          size: [p.anodeLength, p.anodeWidth, p.terminalThickness],
+          center: [
+            p.leadSpan / 2 - p.anodeLength / 2,
+            0,
+            p.terminalThickness / 2
+          ]
+        }
+      )
+    ] }),
+    p.markingWidth > 0 && /* @__PURE__ */ jsx91(Colorize55, { color: "#aaaaa8", children: stripe })
+  ] });
+}
+
+// lib/SOD323HE.tsx
+var SOD323HE = (props) => createFlatLeadDiode({
+  bodyLength: 2,
+  bodyWidth: 1.4,
+  bodyHeight: 0.6,
+  leadSpan: 2.5,
+  cathodeLength: 0.55,
+  cathodeWidth: 0.8,
+  anodeLength: 0.55,
+  anodeWidth: 0.8,
+  terminalThickness: 0.17,
+  standoff: 0.05,
+  taperInset: 0.15,
+  markingWidth: 0.2,
+  ...props
+});
+
 // lib/TantalumCapacitor.tsx
 import { fp as fp11 } from "@tscircuit/footprinter";
-import { Colorize as Colorize54, Cuboid as Cuboid63, Hull as Hull27, Rotate as Rotate25, Translate as Translate42, Union as Union22 } from "jscad-fiber";
-import { jsx as jsx91, jsxs as jsxs86 } from "react/jsx-runtime";
+import { Colorize as Colorize56, Cuboid as Cuboid64, Hull as Hull29, Rotate as Rotate25, Translate as Translate42, Union as Union22 } from "jscad-fiber";
+import { jsx as jsx92, jsxs as jsxs87 } from "react/jsx-runtime";
 var tantalumCases = {
   A: [3.2, 1.6, 1.6, 1.2, 0.8],
   B: [3.5, 2.8, 1.9, 2.2, 0.8],
@@ -8397,35 +8619,35 @@ var TantalumCapacitor = ({
   if (pads.length !== 2) throw new Error("TantalumCapacitor requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx91(Translate42, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs86(Rotate25, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx91(Colorize54, { color: "#d5a64e", children: /* @__PURE__ */ jsxs86(Hull27, { children: [
-      /* @__PURE__ */ jsx91(Cuboid63, { size: [length - 0.1, width10, 0.02], center: [0, 0, 0.21] }),
-      /* @__PURE__ */ jsx91(
-        Cuboid63,
+  return /* @__PURE__ */ jsx92(Translate42, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs87(Rotate25, { rotation: [0, 0, angle], children: [
+    /* @__PURE__ */ jsx92(Colorize56, { color: "#d5a64e", children: /* @__PURE__ */ jsxs87(Hull29, { children: [
+      /* @__PURE__ */ jsx92(Cuboid64, { size: [length - 0.1, width10, 0.02], center: [0, 0, 0.21] }),
+      /* @__PURE__ */ jsx92(
+        Cuboid64,
         {
           size: [length - 0.25, width10 - 0.15, 0.02],
           center: [0, 0, height10 - 0.01]
         }
       )
     ] }) }),
-    /* @__PURE__ */ jsx91(Colorize54, { color: "#c5c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsxs86(Union22, { children: [
-      /* @__PURE__ */ jsx91(
-        Cuboid63,
+    /* @__PURE__ */ jsx92(Colorize56, { color: "#c5c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsxs87(Union22, { children: [
+      /* @__PURE__ */ jsx92(
+        Cuboid64,
         {
           size: [leadLength, leadWidth, 0.25],
           center: [side * (length - leadLength) / 2, 0, 0.125]
         }
       ),
-      /* @__PURE__ */ jsx91(
-        Cuboid63,
+      /* @__PURE__ */ jsx92(
+        Cuboid64,
         {
           size: [0.15, leadWidth, height10 * 0.45],
           center: [side * (length - 0.15) / 2, 0, height10 * 0.225]
         }
       )
     ] }, side)) }),
-    /* @__PURE__ */ jsx91(
-      Cuboid63,
+    /* @__PURE__ */ jsx92(
+      Cuboid64,
       {
         size: [0.25, width10 - 0.25, 0.01],
         center: [-length / 2 + 0.5, 0, height10],
@@ -8437,8 +8659,8 @@ var TantalumCapacitor = ({
 
 // lib/TwoPadCrystal.tsx
 import { fp as fp12 } from "@tscircuit/footprinter";
-import { Colorize as Colorize55, Cuboid as Cuboid64, RoundedCuboid as RoundedCuboid6, Rotate as Rotate26, Translate as Translate43 } from "jscad-fiber";
-import { jsx as jsx92, jsxs as jsxs87 } from "react/jsx-runtime";
+import { Colorize as Colorize57, Cuboid as Cuboid65, RoundedCuboid as RoundedCuboid6, Rotate as Rotate26, Translate as Translate43 } from "jscad-fiber";
+import { jsx as jsx93, jsxs as jsxs88 } from "react/jsx-runtime";
 var twoPadCrystalPackages = {
   FC135: [3.2, 1.5, 0.9, 0.7],
   FC12M: [2.05, 1.2, 0.6, 0.5],
@@ -8458,9 +8680,9 @@ var TwoPadCrystal = ({
   if (pads.length !== 2) throw new Error("TwoPadCrystal requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx92(Translate43, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs87(Rotate26, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx92(Colorize55, { color: "#e0dcca", children: /* @__PURE__ */ jsx92(Cuboid64, { size: [length, width10, 0.2], center: [0, 0, 0.13] }) }),
-    /* @__PURE__ */ jsx92(Colorize55, { color: "#acb1b8", children: /* @__PURE__ */ jsx92(
+  return /* @__PURE__ */ jsx93(Translate43, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs88(Rotate26, { rotation: [0, 0, angle], children: [
+    /* @__PURE__ */ jsx93(Colorize57, { color: "#e0dcca", children: /* @__PURE__ */ jsx93(Cuboid65, { size: [length, width10, 0.2], center: [0, 0, 0.13] }) }),
+    /* @__PURE__ */ jsx93(Colorize57, { color: "#acb1b8", children: /* @__PURE__ */ jsx93(
       RoundedCuboid6,
       {
         size: [length - 0.04, width10 - 0.04, height10 - 0.18],
@@ -8468,8 +8690,8 @@ var TwoPadCrystal = ({
         center: [0, 0, (height10 + 0.18) / 2]
       }
     ) }),
-    /* @__PURE__ */ jsx92(Colorize55, { color: "#c6af65", children: [-1, 1].map((side) => /* @__PURE__ */ jsx92(
-      Cuboid64,
+    /* @__PURE__ */ jsx93(Colorize57, { color: "#c6af65", children: [-1, 1].map((side) => /* @__PURE__ */ jsx93(
+      Cuboid65,
       {
         size: [terminalLength, width10 - 0.12, 0.06],
         center: [side * (length - terminalLength) / 2, 0, 0.03]
@@ -8481,8 +8703,8 @@ var TwoPadCrystal = ({
 
 // lib/CeramicChipAntenna.tsx
 import { fp as fp13 } from "@tscircuit/footprinter";
-import { Colorize as Colorize56, Cuboid as Cuboid65, Rotate as Rotate27, Translate as Translate44 } from "jscad-fiber";
-import { jsx as jsx93, jsxs as jsxs88 } from "react/jsx-runtime";
+import { Colorize as Colorize58, Cuboid as Cuboid66, Rotate as Rotate27, Translate as Translate44 } from "jscad-fiber";
+import { jsx as jsx94, jsxs as jsxs89 } from "react/jsx-runtime";
 var CeramicChipAntenna = ({
   footprint = "smdpads2_p5.4mm_pw1mm_ph2mm"
 }) => {
@@ -8492,17 +8714,17 @@ var CeramicChipAntenna = ({
   if (pads.length !== 2) throw new Error("CeramicChipAntenna requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx93(Translate44, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs88(Rotate27, { rotation: [0, 0, angle], children: [
-    /* @__PURE__ */ jsx93(
-      Cuboid65,
+  return /* @__PURE__ */ jsx94(Translate44, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, 0], children: /* @__PURE__ */ jsxs89(Rotate27, { rotation: [0, 0, angle], children: [
+    /* @__PURE__ */ jsx94(
+      Cuboid66,
       {
         size: [4.44, 1.99, 1.14],
         center: [0, 0, 0.575],
         color: "#4053a3"
       }
     ),
-    /* @__PURE__ */ jsx93(Colorize56, { color: "#c2c4c7", children: [-1, 1].map((side) => /* @__PURE__ */ jsx93(
-      Cuboid65,
+    /* @__PURE__ */ jsx94(Colorize58, { color: "#c2c4c7", children: [-1, 1].map((side) => /* @__PURE__ */ jsx94(
+      Cuboid66,
       {
         size: [0.4, 2, 1.15],
         center: [side * 2.4, 0, 0.575],
@@ -8510,8 +8732,8 @@ var CeramicChipAntenna = ({
       },
       side
     )) }),
-    /* @__PURE__ */ jsx93(
-      Cuboid65,
+    /* @__PURE__ */ jsx94(
+      Cuboid66,
       {
         size: [0.9, 2, 0.01],
         center: [-1.75, 0, 1.145],
@@ -8523,8 +8745,8 @@ var CeramicChipAntenna = ({
 
 // lib/MelfResistor.tsx
 import { fp as fp14 } from "@tscircuit/footprinter";
-import { Colorize as Colorize57, Cylinder as Cylinder23, Rotate as Rotate28, Translate as Translate45 } from "jscad-fiber";
-import { jsx as jsx94, jsxs as jsxs89 } from "react/jsx-runtime";
+import { Colorize as Colorize59, Cylinder as Cylinder23, Rotate as Rotate28, Translate as Translate45 } from "jscad-fiber";
+import { jsx as jsx95, jsxs as jsxs90 } from "react/jsx-runtime";
 var melfResistorSizes = {
   "0102": [2.2, 1.1, 0.4],
   "0204": [3.6, 1.4, 0.75],
@@ -8543,15 +8765,15 @@ var MelfResistor = ({
   if (pads.length !== 2) throw new Error("MelfResistor requires two pads");
   const [a, b] = pads;
   const angle = Math.atan2(b.y - a.y, b.x - a.x);
-  return /* @__PURE__ */ jsx94(Translate45, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, diameter / 2], children: /* @__PURE__ */ jsx94(Rotate28, { rotation: [0, 0, angle], children: /* @__PURE__ */ jsxs89(Rotate28, { rotation: [0, Math.PI / 2, 0], children: [
-    /* @__PURE__ */ jsx94(Colorize57, { color: "#426d63", children: /* @__PURE__ */ jsx94(
+  return /* @__PURE__ */ jsx95(Translate45, { offset: [(a.x + b.x) / 2, (a.y + b.y) / 2, diameter / 2], children: /* @__PURE__ */ jsx95(Rotate28, { rotation: [0, 0, angle], children: /* @__PURE__ */ jsxs90(Rotate28, { rotation: [0, Math.PI / 2, 0], children: [
+    /* @__PURE__ */ jsx95(Colorize59, { color: "#426d63", children: /* @__PURE__ */ jsx95(
       Cylinder23,
       {
         radius: (diameter - 0.08) / 2,
         height: length - 2 * capLength + 0.04
       }
     ) }),
-    /* @__PURE__ */ jsx94(Colorize57, { color: "#c6c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsx94(
+    /* @__PURE__ */ jsx95(Colorize59, { color: "#c6c8cb", children: [-1, 1].map((side) => /* @__PURE__ */ jsx95(
       Cylinder23,
       {
         radius: diameter / 2,
@@ -8624,6 +8846,7 @@ export {
   SOD323,
   SOD323F,
   SOD323FL,
+  SOD323HE,
   SOD523,
   SOD723,
   SOD882,