javonet-nodejs-sdk 2.5.14 → 2.5.16

package/Binaries/Perl/Linux/X64/deps/lib/perl5/Sub/Exporter/Progressive.pm

@@ -1,174 +0,0 @@
-package Sub::Exporter::Progressive;
-$Sub::Exporter::Progressive::VERSION = '0.001013';
-use strict;
-use warnings;
-
-# ABSTRACT: Only use Sub::Exporter if you need it
-
-sub _croak {
-  require Carp;
-  &Carp::croak;
-}
-
-sub import {
-   my ($self, @args) = @_;
-
-   my $inner_target = caller;
-   my $export_data = sub_export_options($inner_target, @args);
-
-   my $full_exporter;
-   no strict 'refs';
-   no warnings 'once';
-   @{"${inner_target}::EXPORT_OK"} = @{$export_data->{exports}};
-   @{"${inner_target}::EXPORT"} = @{$export_data->{defaults}};
-   %{"${inner_target}::EXPORT_TAGS"} = %{$export_data->{tags}};
-   *{"${inner_target}::import"} = sub {
-      use strict;
-      my ($self, @args) = @_;
-
-      if ( grep {
-         length ref $_
-            or
-         $_ !~ / \A [:-]? \w+ \z /xm
-      } @args ) {
-         _croak 'your usage of Sub::Exporter::Progressive requires Sub::Exporter to be installed'
-            unless eval { require Sub::Exporter };
-         $full_exporter ||= Sub::Exporter::build_exporter($export_data->{original});
-
-         goto $full_exporter;
-      } elsif ( defined( (my ($num) = grep { m/^\d/ } @args)[0] ) ) {
-         _croak "cannot export symbols with a leading digit: '$num'";
-      } else {
-         require Exporter;
-         s/ \A - /:/xm for @args;
-         @_ = ($self, @args);
-         goto \&Exporter::import;
-      }
-   };
-   return;
-}
-
-my $too_complicated = <<'DEATH';
-You are using Sub::Exporter::Progressive, but the features your program uses from
-Sub::Exporter cannot be implemented without Sub::Exporter, so you might as well
-just use vanilla Sub::Exporter
-DEATH
-
-sub sub_export_options {
-   my ($inner_target, $setup, $options) = @_;
-
-   my @exports;
-   my @defaults;
-   my %tags;
-
-   if ( ($setup||'') eq '-setup') {
-      my %options = %$options;
-
-      OPTIONS:
-      for my $opt (keys %options) {
-         if ($opt eq 'exports') {
-
-            _croak $too_complicated if ref $options{exports} ne 'ARRAY';
-            @exports = @{$options{exports}};
-            _croak $too_complicated if grep { length ref $_ } @exports;
-
-         } elsif ($opt eq 'groups') {
-            %tags = %{$options{groups}};
-            for my $tagset (values %tags) {
-               _croak $too_complicated if grep {
-                  length ref $_
-                     or
-                  $_ =~ / \A - (?! all \b ) /x
-               } @{$tagset};
-            }
-            @defaults = @{$tags{default} || [] };
-         } else {
-            _croak $too_complicated;
-         }
-      }
-      @{$_} = map { / \A  [:-] all \z /x ? @exports : $_ } @{$_} for \@defaults, values %tags;
-      $tags{all} ||= [ @exports ];
-      my %exports = map { $_ => 1 } @exports;
-      my @errors = grep { not $exports{$_} } @defaults;
-      _croak join(', ', @errors) . " is not exported by the $inner_target module\n" if @errors;
-   }
-
-   return {
-      exports => \@exports,
-      defaults => \@defaults,
-      original => $options,
-      tags => \%tags,
-   };
-}
-
-1;
-
-__END__
-
-=pod
-
-=encoding UTF-8
-
-=head1 NAME
-
-Sub::Exporter::Progressive - Only use Sub::Exporter if you need it
-
-=head1 VERSION
-
-version 0.001013
-
-=head1 SYNOPSIS
-
- package Syntax::Keyword::Gather;
-
- use Sub::Exporter::Progressive -setup => {
-   exports => [qw( break gather gathered take )],
-   groups => {
-     default => [qw( break gather gathered take )],
-   },
- };
-
- # elsewhere
-
- # uses Exporter for speed
- use Syntax::Keyword::Gather;
-
- # somewhere else
-
- # uses Sub::Exporter for features
- use Syntax::Keyword::Gather 'gather', take => { -as => 'grab' };
-
-=head1 DESCRIPTION
-
-L<Sub::Exporter> is an incredibly powerful module, but with that power comes
-great responsibility, er- as well as some runtime penalties.  This module
-is a C<Sub::Exporter> wrapper that will let your users just use L<Exporter>
-if all they are doing is picking exports, but use C<Sub::Exporter> if your
-users try to use C<Sub::Exporter>'s more advanced features, like
-renaming exports, if they try to use them.
-
-Note that this module will export C<@EXPORT>, C<@EXPORT_OK> and
-C<%EXPORT_TAGS> package variables for C<Exporter> to work.  Additionally, if
-your package uses advanced C<Sub::Exporter> features like currying, this module
-will only ever use C<Sub::Exporter>, so you might as well use it directly.
-
-=head1 CONTRIBUTORS
-
-ilmari - Dagfinn Ilmari Mannsåker (cpan:ILMARI) <ilmari@ilmari.org>
-
-mst - Matt S. Trout (cpan:MSTROUT) <mst@shadowcat.co.uk>
-
-leont - Leon Timmermans (cpan:LEONT) <leont@cpan.org>
-
-=head1 AUTHOR
-
-Arthur Axel "fREW" Schmidt <Sub-Exporter-Progressive@afoolishmanifesto.com>
-
-=head1 COPYRIGHT AND LICENSE
-
-This software is copyright (c) 2016 by Arthur Axel "fREW" Schmidt.
-
-This is free software; you can redistribute it and/or modify it under
-the same terms as the Perl 5 programming language system itself.
-
-=cut

package/Binaries/Perl/Linux/X64/deps/lib/perl5/Sub/Exporter/Tutorial.pod

@@ -1,539 +0,0 @@
-
-# PODNAME: Sub::Exporter::Tutorial
-# ABSTRACT: a friendly guide to exporting with Sub::Exporter
-
-#pod =head1 DESCRIPTION
-#pod
-#pod =head2 What's an Exporter?
-#pod
-#pod When you C<use> a module, first it is required, then its C<import> method is
-#pod called.  The Perl documentation tells us that the following two lines are
-#pod equivalent:
-#pod
-#pod   use Module LIST;
-#pod
-#pod   BEGIN { require Module; Module->import(LIST); }
-#pod
-#pod The method named C<import> is the module's I<exporter>, it exports
-#pod functions and variables into its caller's namespace.
-#pod
-#pod =head2 The Basics of Sub::Exporter
-#pod
-#pod Sub::Exporter builds a custom exporter which can then be installed into your
-#pod module.  It builds this method based on configuration passed to its
-#pod C<setup_exporter> method.
-#pod
-#pod A very basic use case might look like this:
-#pod
-#pod   package Addition;
-#pod   use Sub::Exporter;
-#pod   Sub::Exporter::setup_exporter({ exports => [ qw(plus) ]});
-#pod
-#pod   sub plus { my ($x, $y) = @_; return $x + $y; }
-#pod
-#pod This would mean that when someone used your Addition module, they could have
-#pod its C<plus> routine imported into their package:
-#pod
-#pod   use Addition qw(plus);
-#pod
-#pod   my $z = plus(2, 2); # this works, because now plus is in the main package
-#pod
-#pod That syntax to set up the exporter, above, is a little verbose, so for the
-#pod simple case of just naming some exports, you can write this:
-#pod
-#pod   use Sub::Exporter -setup => { exports => [ qw(plus) ] };
-#pod
-#pod ...which is the same as the original example -- except that now the exporter is
-#pod built and installed at compile time.  Well, that and you typed less.
-#pod
-#pod =head2 Using Export Groups
-#pod
-#pod You can specify whole groups of things that should be exportable together.
-#pod These are called groups.  L<Exporter> calls these tags.  To specify groups, you
-#pod just pass a C<groups> key in your exporter configuration:
-#pod
-#pod   package Food;
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [ qw(apple banana beef fluff lox rabbit) ],
-#pod     groups  => {
-#pod       fauna  => [ qw(beef lox rabbit) ],
-#pod       flora  => [ qw(apple banana) ],
-#pod     }
-#pod   };
-#pod
-#pod Now, to import all that delicious foreign meat, your consumer needs only to
-#pod write:
-#pod
-#pod   use Food qw(:fauna);
-#pod   use Food qw(-fauna);
-#pod
-#pod Either one of the above is acceptable.  A colon is more traditional, but
-#pod barewords with a leading colon can't be enquoted by a fat arrow.  We'll see why
-#pod that matters later on.
-#pod
-#pod Groups can contain other groups.  If you include a group name (with the leading
-#pod dash or colon) in a group definition, it will be expanded recursively when the
-#pod exporter is called.  The exporter will B<not> recurse into the same group twice
-#pod while expanding groups.
-#pod
-#pod There are two special groups:  C<all> and C<default>.  The C<all> group is
-#pod defined for you and contains all exportable subs.  You can redefine it,
-#pod if you want to export only a subset when all exports are requested.  The
-#pod C<default> group is the set of routines to export when nothing specific is
-#pod requested.  By default, there is no C<default> group.
-#pod
-#pod =head2 Renaming Your Imports
-#pod
-#pod Sometimes you want to import something, but you don't like the name as which
-#pod it's imported.  Sub::Exporter can rename your imports for you.  If you wanted
-#pod to import C<lox> from the Food package, but you don't like the name, you could
-#pod write this:
-#pod
-#pod   use Food lox => { -as => 'salmon' };
-#pod
-#pod Now you'd get the C<lox> routine, but it would be called salmon in your
-#pod package.  You can also rename entire groups by using the C<prefix> option:
-#pod
-#pod   use Food -fauna => { -prefix => 'cute_little_' };
-#pod
-#pod Now you can call your C<cute_little_rabbit> routine.  (You can also call
-#pod C<cute_little_beef>, but that hardly seems as enticing.)
-#pod
-#pod When you define groups, you can include renaming.
-#pod
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [ qw(apple banana beef fluff lox rabbit) ],
-#pod     groups  => {
-#pod       fauna  => [ qw(beef lox), rabbit => { -as => 'coney' } ],
-#pod     }
-#pod   };
-#pod
-#pod A prefix on a group like that does the right thing.  This is when it's useful
-#pod to use a dash instead of a colon to indicate a group: you can put a fat arrow
-#pod between the group and its arguments, then.
-#pod
-#pod   use Food -fauna => { -prefix => 'lovely_' };
-#pod
-#pod   eat( lovely_coney ); # this works
-#pod
-#pod Prefixes also apply recursively.  That means that this code works:
-#pod
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [ qw(apple banana beef fluff lox rabbit) ],
-#pod     groups  => {
-#pod       fauna   => [ qw(beef lox), rabbit => { -as => 'coney' } ],
-#pod       allowed => [ -fauna => { -prefix => 'willing_' }, 'banana' ],
-#pod     }
-#pod   };
-#pod
-#pod   ...
-#pod
-#pod   use Food -allowed => { -prefix => 'any_' };
-#pod
-#pod   $dinner = any_willing_coney; # yum!
-#pod
-#pod Groups can also be passed a C<-suffix> argument.
-#pod
-#pod Finally, if the C<-as> argument to an exported routine is a reference to a
-#pod scalar, a reference to the routine will be placed in that scalar.
-#pod
-#pod =head2 Building Subroutines to Order
-#pod
-#pod Sometimes, you want to export things that you don't have on hand.  You might
-#pod want to offer customized routines built to the specification of your consumer;
-#pod that's just good business!  With Sub::Exporter, this is easy.
-#pod
-#pod To offer subroutines to order, you need to provide a generator when you set up
-#pod your exporter.  A generator is just a routine that returns a new routine.
-#pod L<perlref> is talking about these when it discusses closures and function
-#pod templates. The canonical example of a generator builds a unique incrementor;
-#pod here's how you'd do that with Sub::Exporter;
-#pod
-#pod   package Package::Counter;
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [ counter => sub { my $i = 0; sub { $i++ } } ],
-#pod     groups  => { default => [ qw(counter) ] },
-#pod   };
-#pod
-#pod Now anyone can use your Package::Counter module and he'll receive a C<counter>
-#pod in his package.  It will count up by one, and will never interfere with anyone
-#pod else's counter.
-#pod
-#pod This isn't very useful, though, unless the consumer can explain what he wants.
-#pod This is done, in part, by supplying arguments when importing.  The following
-#pod example shows how a generator can take and use arguments:
-#pod
-#pod   package Package::Counter;
-#pod
-#pod   sub _build_counter {
-#pod     my ($class, $name, $arg) = @_;
-#pod     $arg ||= {};
-#pod     my $i = $arg->{start} || 0;
-#pod     return sub { $i++ };
-#pod   }
-#pod
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [ counter => \'_build_counter' ],
-#pod     groups  => { default => [ qw(counter) ] },
-#pod   };
-#pod
-#pod Now, the consumer can (if he wants) specify a starting value for his counter:
-#pod
-#pod   use Package::Counter counter => { start => 10 };
-#pod
-#pod Arguments to a group are passed along to the generators of routines in that
-#pod group, but Sub::Exporter arguments -- anything beginning with a dash -- are
-#pod never passed in.  When groups are nested, the arguments are merged as the
-#pod groups are expanded.
-#pod
-#pod Notice, too, that in the example above, we gave a reference to a method I<name>
-#pod rather than a method I<implementation>.  By giving the name rather than the
-#pod subroutine, we make it possible for subclasses of our "Package::Counter" module
-#pod to replace the C<_build_counter> method.
-#pod
-#pod When a generator is called, it is passed four parameters:
-#pod
-#pod =over
-#pod
-#pod =item * the invocant on which the exporter was called
-#pod
-#pod =item * the name of the export being generated (not the name it's being installed as)
-#pod
-#pod =item * the arguments supplied for the routine
-#pod
-#pod =item * the collection of generic arguments
-#pod
-#pod =back
-#pod
-#pod The fourth item is the last major feature that hasn't been covered.
-#pod
-#pod =head2 Argument Collectors
-#pod
-#pod Sometimes you will want to accept arguments once that can then be available to
-#pod any subroutine that you're going to export.  To do this, you specify
-#pod collectors, like this:
-#pod
-#pod   package Menu::Airline
-#pod   use Sub::Exporter -setup => {
-#pod     exports =>  ... ,
-#pod     groups  =>  ... ,
-#pod     collectors => [ qw(allergies ethics) ],
-#pod   };
-#pod
-#pod Collectors look like normal exports in the import call, but they don't do
-#pod anything but collect data which can later be passed to generators.  If the
-#pod module was used like this:
-#pod
-#pod   use Menu::Airline allergies => [ qw(peanuts) ], ethics => [ qw(vegan) ];
-#pod
-#pod ...the consumer would get a salad.  Also, all the generators would be passed,
-#pod as their fourth argument, something like this:
-#pod
-#pod   { allerges => [ qw(peanuts) ], ethics => [ qw(vegan) ] }
-#pod
-#pod Generators may have arguments in their definition, as well.  These must be code
-#pod refs that perform validation of the collected values.  They are passed the
-#pod collection value and may return true or false.  If they return false, the
-#pod exporter will throw an exception.
-#pod
-#pod =head2 Generating Many Routines in One Scope
-#pod
-#pod Sometimes it's useful to have multiple routines generated in one scope.  This
-#pod way they can share lexical data which is otherwise unavailable.  To do this,
-#pod you can supply a generator for a group which returns a hashref of names and
-#pod code references.  This generator is passed all the usual data, and the group
-#pod may receive the usual C<-prefix> or C<-suffix> arguments.
-#pod
-#pod =head1 SEE ALSO
-#pod
-#pod =for :list
-#pod * L<Sub::Exporter> for complete documentation and references to other exporters
-
-__END__
-
-=pod
-
-=encoding UTF-8
-
-=head1 NAME
-
-Sub::Exporter::Tutorial - a friendly guide to exporting with Sub::Exporter
-
-=head1 VERSION
-
-version 0.991
-
-=head1 DESCRIPTION
-
-=head2 What's an Exporter?
-
-When you C<use> a module, first it is required, then its C<import> method is
-called.  The Perl documentation tells us that the following two lines are
-equivalent:
-
-  use Module LIST;
-
-  BEGIN { require Module; Module->import(LIST); }
-
-The method named C<import> is the module's I<exporter>, it exports
-functions and variables into its caller's namespace.
-
-=head2 The Basics of Sub::Exporter
-
-Sub::Exporter builds a custom exporter which can then be installed into your
-module.  It builds this method based on configuration passed to its
-C<setup_exporter> method.
-
-A very basic use case might look like this:
-
-  package Addition;
-  use Sub::Exporter;
-  Sub::Exporter::setup_exporter({ exports => [ qw(plus) ]});
-
-  sub plus { my ($x, $y) = @_; return $x + $y; }
-
-This would mean that when someone used your Addition module, they could have
-its C<plus> routine imported into their package:
-
-  use Addition qw(plus);
-
-  my $z = plus(2, 2); # this works, because now plus is in the main package
-
-That syntax to set up the exporter, above, is a little verbose, so for the
-simple case of just naming some exports, you can write this:
-
-  use Sub::Exporter -setup => { exports => [ qw(plus) ] };
-
-...which is the same as the original example -- except that now the exporter is
-built and installed at compile time.  Well, that and you typed less.
-
-=head2 Using Export Groups
-
-You can specify whole groups of things that should be exportable together.
-These are called groups.  L<Exporter> calls these tags.  To specify groups, you
-just pass a C<groups> key in your exporter configuration:
-
-  package Food;
-  use Sub::Exporter -setup => {
-    exports => [ qw(apple banana beef fluff lox rabbit) ],
-    groups  => {
-      fauna  => [ qw(beef lox rabbit) ],
-      flora  => [ qw(apple banana) ],
-    }
-  };
-
-Now, to import all that delicious foreign meat, your consumer needs only to
-write:
-
-  use Food qw(:fauna);
-  use Food qw(-fauna);
-
-Either one of the above is acceptable.  A colon is more traditional, but
-barewords with a leading colon can't be enquoted by a fat arrow.  We'll see why
-that matters later on.
-
-Groups can contain other groups.  If you include a group name (with the leading
-dash or colon) in a group definition, it will be expanded recursively when the
-exporter is called.  The exporter will B<not> recurse into the same group twice
-while expanding groups.
-
-There are two special groups:  C<all> and C<default>.  The C<all> group is
-defined for you and contains all exportable subs.  You can redefine it,
-if you want to export only a subset when all exports are requested.  The
-C<default> group is the set of routines to export when nothing specific is
-requested.  By default, there is no C<default> group.
-
-=head2 Renaming Your Imports
-
-Sometimes you want to import something, but you don't like the name as which
-it's imported.  Sub::Exporter can rename your imports for you.  If you wanted
-to import C<lox> from the Food package, but you don't like the name, you could
-write this:
-
-  use Food lox => { -as => 'salmon' };
-
-Now you'd get the C<lox> routine, but it would be called salmon in your
-package.  You can also rename entire groups by using the C<prefix> option:
-
-  use Food -fauna => { -prefix => 'cute_little_' };
-
-Now you can call your C<cute_little_rabbit> routine.  (You can also call
-C<cute_little_beef>, but that hardly seems as enticing.)
-
-When you define groups, you can include renaming.
-
-  use Sub::Exporter -setup => {
-    exports => [ qw(apple banana beef fluff lox rabbit) ],
-    groups  => {
-      fauna  => [ qw(beef lox), rabbit => { -as => 'coney' } ],
-    }
-  };
-
-A prefix on a group like that does the right thing.  This is when it's useful
-to use a dash instead of a colon to indicate a group: you can put a fat arrow
-between the group and its arguments, then.
-
-  use Food -fauna => { -prefix => 'lovely_' };
-
-  eat( lovely_coney ); # this works
-
-Prefixes also apply recursively.  That means that this code works:
-
-  use Sub::Exporter -setup => {
-    exports => [ qw(apple banana beef fluff lox rabbit) ],
-    groups  => {
-      fauna   => [ qw(beef lox), rabbit => { -as => 'coney' } ],
-      allowed => [ -fauna => { -prefix => 'willing_' }, 'banana' ],
-    }
-  };
-
-  ...
-
-  use Food -allowed => { -prefix => 'any_' };
-
-  $dinner = any_willing_coney; # yum!
-
-Groups can also be passed a C<-suffix> argument.
-
-Finally, if the C<-as> argument to an exported routine is a reference to a
-scalar, a reference to the routine will be placed in that scalar.
-
-=head2 Building Subroutines to Order
-
-Sometimes, you want to export things that you don't have on hand.  You might
-want to offer customized routines built to the specification of your consumer;
-that's just good business!  With Sub::Exporter, this is easy.
-
-To offer subroutines to order, you need to provide a generator when you set up
-your exporter.  A generator is just a routine that returns a new routine.
-L<perlref> is talking about these when it discusses closures and function
-templates. The canonical example of a generator builds a unique incrementor;
-here's how you'd do that with Sub::Exporter;
-
-  package Package::Counter;
-  use Sub::Exporter -setup => {
-    exports => [ counter => sub { my $i = 0; sub { $i++ } } ],
-    groups  => { default => [ qw(counter) ] },
-  };
-
-Now anyone can use your Package::Counter module and he'll receive a C<counter>
-in his package.  It will count up by one, and will never interfere with anyone
-else's counter.
-
-This isn't very useful, though, unless the consumer can explain what he wants.
-This is done, in part, by supplying arguments when importing.  The following
-example shows how a generator can take and use arguments:
-
-  package Package::Counter;
-
-  sub _build_counter {
-    my ($class, $name, $arg) = @_;
-    $arg ||= {};
-    my $i = $arg->{start} || 0;
-    return sub { $i++ };
-  }
-
-  use Sub::Exporter -setup => {
-    exports => [ counter => \'_build_counter' ],
-    groups  => { default => [ qw(counter) ] },
-  };
-
-Now, the consumer can (if he wants) specify a starting value for his counter:
-
-  use Package::Counter counter => { start => 10 };
-
-Arguments to a group are passed along to the generators of routines in that
-group, but Sub::Exporter arguments -- anything beginning with a dash -- are
-never passed in.  When groups are nested, the arguments are merged as the
-groups are expanded.
-
-Notice, too, that in the example above, we gave a reference to a method I<name>
-rather than a method I<implementation>.  By giving the name rather than the
-subroutine, we make it possible for subclasses of our "Package::Counter" module
-to replace the C<_build_counter> method.
-
-When a generator is called, it is passed four parameters:
-
-=over
-
-=item * the invocant on which the exporter was called
-
-=item * the name of the export being generated (not the name it's being installed as)
-
-=item * the arguments supplied for the routine
-
-=item * the collection of generic arguments
-
-=back
-
-The fourth item is the last major feature that hasn't been covered.
-
-=head2 Argument Collectors
-
-Sometimes you will want to accept arguments once that can then be available to
-any subroutine that you're going to export.  To do this, you specify
-collectors, like this:
-
-  package Menu::Airline
-  use Sub::Exporter -setup => {
-    exports =>  ... ,
-    groups  =>  ... ,
-    collectors => [ qw(allergies ethics) ],
-  };
-
-Collectors look like normal exports in the import call, but they don't do
-anything but collect data which can later be passed to generators.  If the
-module was used like this:
-
-  use Menu::Airline allergies => [ qw(peanuts) ], ethics => [ qw(vegan) ];
-
-...the consumer would get a salad.  Also, all the generators would be passed,
-as their fourth argument, something like this:
-
-  { allerges => [ qw(peanuts) ], ethics => [ qw(vegan) ] }
-
-Generators may have arguments in their definition, as well.  These must be code
-refs that perform validation of the collected values.  They are passed the
-collection value and may return true or false.  If they return false, the
-exporter will throw an exception.
-
-=head2 Generating Many Routines in One Scope
-
-Sometimes it's useful to have multiple routines generated in one scope.  This
-way they can share lexical data which is otherwise unavailable.  To do this,
-you can supply a generator for a group which returns a hashref of names and
-code references.  This generator is passed all the usual data, and the group
-may receive the usual C<-prefix> or C<-suffix> arguments.
-
-=head1 PERL VERSION
-
-This library should run on perls released even a long time ago.  It should
-work on any version of perl released in the last five years.
-
-Although it may work on older versions of perl, no guarantee is made that the
-minimum required version will not be increased.  The version may be increased
-for any reason, and there is no promise that patches will be accepted to
-lower the minimum required perl.
-
-=head1 SEE ALSO
-
-=over 4
-
-=item *
-
-L<Sub::Exporter> for complete documentation and references to other exporters
-
-=back
-
-=head1 AUTHOR
-
-Ricardo Signes <cpan@semiotic.systems>
-
-=head1 COPYRIGHT AND LICENSE
-
-This software is copyright (c) 2007 by Ricardo Signes.
-
-This is free software; you can redistribute it and/or modify it under
-the same terms as the Perl 5 programming language system itself.
-
-=cut