javonet-nodejs-sdk 2.1.1 → 2.1.2

package/Binaries/Perl/Linux/X64/deps/lib/perl5/alienfile.pm

@@ -1,880 +0,0 @@
-package alienfile;
-
-use strict;
-use warnings;
-use 5.008004;
-use Alien::Build;
-use Exporter ();
-use Path::Tiny ();
-use Carp ();
-
-sub _path { Path::Tiny::path(@_) }
-
-# ABSTRACT: Specification for defining an external dependency for CPAN
-our $VERSION = '2.78'; # VERSION
-
-
-our @EXPORT = qw( requires on plugin probe configure share sys download fetch decode prefer extract patch patch_ffi build build_ffi gather gather_ffi meta_prop ffi log test start_url before after digest );
-
-
-sub requires
-{
-  my($module, $version) = @_;
-  $version ||= 0;
-  my $caller = caller;
-  my $meta = $caller->meta;
-  $meta->add_requires($meta->{phase}, $module, $version);
-  ();
-}
-
-
-sub plugin
-{
-  my($name, @args) = @_;
-
-  my $caller = caller;
-  $caller->meta->apply_plugin($name, @args);
-  return;
-}
-
-
-sub probe
-{
-  my($instr) = @_;
-  my $caller = caller;
-  if(my $phase = $caller->meta->{phase})
-  {
-    Carp::croak "probe must not be in a $phase block" if $phase ne 'any';
-  }
-  $caller->meta->register_hook(probe => $instr);
-  return;
-}
-
-
-sub _phase
-{
-  my($code, $phase) = @_;
-  my $caller = caller(1);
-  my $meta = $caller->meta;
-  local $meta->{phase} = $phase;
-  $code->();
-  return;
-}
-
-sub configure (&)
-{
-  _phase($_[0], 'configure');
-}
-
-
-sub sys (&)
-{
-  _phase($_[0], 'system');
-}
-
-
-
-sub share (&)
-{
-  _phase($_[0], 'share');
-}
-
-
-sub _in_phase
-{
-  my($phase) = @_;
-  my $caller = caller(1);
-  my(undef, undef, undef, $sub) = caller(1);
-  my $meta = $caller->meta;
-  $sub =~ s/^.*:://;
-  Carp::croak "$sub must be in a $phase block"
-    unless $meta->{phase} eq $phase;
-}
-
-sub start_url
-{
-  my($url) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  my $meta = $caller->meta;
-  $meta->prop->{start_url} = $url;
-  $meta->add_requires('configure' => 'Alien::Build' => '1.19');
-  return;
-}
-
-
-sub digest
-{
-  my($algo, $digest) = @_;
-
-  my $caller = caller;
-  $caller->meta->apply_plugin('Digest', [$algo, $digest]);
-  return;
-}
-
-
-sub download
-{
-  my($instr) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(download => $instr);
-  return;
-}
-
-
-sub fetch
-{
-  my($instr) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(fetch => $instr);
-  return;
-}
-
-
-sub decode
-{
-  my($instr) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(decode => $instr);
-  return;
-}
-
-
-sub prefer
-{
-  my($instr) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(prefer => $instr);
-  return;
-}
-
-
-sub extract
-{
-  my($instr) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(extract => $instr);
-  return;
-}
-
-
-sub patch
-{
-  my($instr) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  my $suffix = $caller->meta->{build_suffix};
-  $caller->meta->register_hook("patch$suffix" => $instr);
-  return;
-}
-
-
-sub patch_ffi
-{
-  my($instr) = @_;
-  Carp::carp("patch_ffi is deprecated, use ffi { patch ... } } instead");
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(patch_ffi => $instr);
-  return;
-}
-
-
-sub build
-{
-  my($instr) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  my $suffix = $caller->meta->{build_suffix};
-  $caller->meta->register_hook("build$suffix" => $instr);
-  return;
-}
-
-
-sub build_ffi
-{
-  my($instr) = @_;
-  Carp::carp("build_ffi is deprecated, use ffi { build ... } } instead");
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(build_ffi => $instr);
-  return;
-}
-
-
-sub gather
-{
-  my($instr) = @_;
-  my $caller = caller;
-  my $meta = $caller->meta;
-  my $phase = $meta->{phase};
-  Carp::croak "gather is not allowed in configure block"
-    if $phase eq 'configure';
-  my $suffix = $caller->meta->{build_suffix};
-  if($suffix eq '_ffi')
-  {
-    $meta->register_hook(gather_ffi => $instr)
-  }
-  else
-  {
-    $meta->register_hook(gather_system => $instr) if $phase =~ /^(any|system)$/;
-    $meta->register_hook(gather_share => $instr)  if $phase =~ /^(any|share)$/;
-  }
-  return;
-}
-
-
-sub gather_ffi
-{
-  my($instr) = @_;
-  Carp::carp("gather_ffi is deprecated, use ffi { gather ... } } instead");
-  _in_phase 'share';
-  my $caller = caller;
-  $caller->meta->register_hook(gather_ffi => $instr);
-  return;
-}
-
-
-sub ffi (&)
-{
-  my($code) = @_;
-  _in_phase 'share';
-  my $caller = caller;
-  local $caller->meta->{build_suffix} = '_ffi';
-  $code->();
-  return;
-}
-
-
-sub meta_prop
-{
-  my $caller = caller;
-  my $meta = $caller->meta;
-  $meta->prop;
-}
-
-
-sub log
-{
-  unshift @_, 'Alien::Build';
-  goto &Alien::Build::log;
-}
-
-
-sub test
-{
-  my($instr) = @_;
-  my $caller = caller;
-  my $meta = $caller->meta;
-  my $phase = $meta->{phase};
-  Carp::croak "test is not allowed in $phase block"
-    if $phase eq 'any' || $phase eq 'configure';
-
-  $meta->add_requires('configure' => 'Alien::Build' => '1.14');
-
-  if($phase eq 'share')
-  {
-    my $suffix = $caller->meta->{build_suffix} || '_share';
-    $meta->register_hook(
-      "test$suffix" => $instr,
-    );
-  }
-  elsif($phase eq 'system')
-  {
-    $meta->register_hook(
-      "test_system" => $instr,
-    );
-  }
-  else
-  {
-    die "unknown phase: $phase";
-  }
-}
-
-
-my %modifiers = (
-  probe    => { any   => 'probe'    },
-  download => { share => 'download' },
-  fetch    => { share => 'fetch'    },
-  decode   => { share => 'fetch'    },
-  prefer   => { share => 'prefer'   },
-  extract  => { share => 'extract'  },
-  patch    => { share => 'patch$'   },
-  build    => { share => 'build$'   },
-  test     => { share => 'test$'    },
-  # Note: below special case gather_ffi for the ffi block :P
-  gather   => { share => 'gather_share', system => 'gather_system', any => 'gather_share,gather_system' },
-);
-
-sub _add_modifier
-{
-  my($type, $stage, $sub) = @_;
-
-  my $method = "${type}_hook";
-
-  Carp::croak "No such stage $stage" unless defined $modifiers{$stage};
-  Carp::croak "$type $stage argument must be a code reference" unless defined $sub && ref($sub) eq 'CODE';
-
-  my $caller = caller;
-  my $meta = $caller->meta;
-  Carp::croak "$type $stage is not allowed in sys block" unless defined $modifiers{$stage}->{$meta->{phase}};
-
-  $meta->add_requires('configure' => 'Alien::Build' => '1.40');
-
-  my $suffix = $meta->{build_suffix};
-  if($suffix eq '_ffi' && $stage eq 'gather')
-  {
-    $meta->$method('gather_ffi' => $sub);
-  }
-
-  foreach my $hook (
-    map { split /,/, $_ }                        # split on , for when multiple hooks must be attached (gather in any)
-    map { my $x = $_ ; $x =~ s/\$/$suffix/; $x } # substitute $ at the end for a suffix (_ffi) if any
-    $modifiers{$stage}->{$meta->{phase}})        # get the list of modifiers
-  {
-    $meta->$method($hook => $sub);
-  }
-
-  return;
-}
-
-sub before
-{
-  my($stage, $sub) = @_;
-  @_ = ('before', @_);
-  goto &alienfile::_add_modifier;
-}
-
-
-sub after
-{
-  my($stage, $sub) = @_;
-  @_ = ('after', @_);
-  goto &alienfile::_add_modifier;
-}
-
-sub import
-{
-  strict->import;
-  warnings->import;
-  goto &Exporter::import;
-}
-
-1;
-
-__END__
-
-=pod
-
-=encoding UTF-8
-
-=head1 NAME
-
-alienfile - Specification for defining an external dependency for CPAN
-
-=head1 VERSION
-
-version 2.78
-
-=head1 SYNOPSIS
-
-Do-it-yourself approach:
-
- use alienfile;
- 
- probe [ 'pkg-config --exists libarchive' ];
- 
- share {
- 
-   start_url 'http://libarchive.org/downloads/libarchive-3.2.2.tar.gz';
- 
-   # the first one which succeeds will be used
-   download [ 'wget %{.meta.start_url}' ];
-   download [ 'curl -o %{.meta.start_url}' ];
- 
-   extract [ 'tar xf %{.install.download}' ];
- 
-   build [
-     # Note: will not work on Windows, better to use Build::Autoconf plugin
-     # if you need windows support
-     './configure --prefix=%{.install.prefix} --disable-shared',
-     '%{make}',
-     '%{make} install',
-   ];
- }
- 
- gather [
-   [ 'pkg-config', '--modversion', 'libarchive', \'%{.runtime.version}' ],
-   [ 'pkg-config', '--cflags',     'libarchive', \'%{.runtime.cflags}'  ],
-   [ 'pkg-config', '--libs',       'libarchive', \'%{.runtime.libs}'    ],
- ];
-
-With plugins (better):
-
- use alienfile;
- 
- plugin 'PkgConfig' => 'libarchive';
- 
- share {
-   start_url 'http://libarchive.org/downloads/';
-   plugin Download => (
-     filter => qr/^libarchive-.*\.tar\.gz$/,
-     version => qr/([0-9\.]+)/,
-   );
-   plugin Extract => 'tar.gz';
-   plugin 'Build::Autoconf';
-   plugin 'Gather::IsolateDynamic';
-   build [
-     '%{configure}',
-     '%{make}',
-     '%{make} install',
-   ];
- };
-
-=head1 DESCRIPTION
-
-An alienfile is a recipe used by L<Alien::Build> to, probe for system libraries or download from the internet, and build source
-for those libraries.  This document acts as reference for the alienfile system, but if you are starting out writing your own Alien
-you should read L<Alien::Build::Manual::AlienAuthor>, which will teach you how to write your own complete Alien using alienfile +
-L<Alien::Build> + L<ExtUtils::MakeMaker>.  Special attention should be taken to the section "a note about dynamic vs. static
-libraries".
-
-=head1 DIRECTIVES
-
-=head2 requires
-
-"any" requirement (either share or system):
-
- requires $module;
- requires $module => $version;
-
-configure time requirement:
-
- configure {
-   requires $module;
-   requires $module => $version;
- };
-
-system requirement:
-
- sys {
-   requires $module;
-   requires $module => $version;
- };
-
-share requirement:
-
- share {
-   requires $module;
-   requires $module => $version;
- };
-
-specifies a requirement.  L<Alien::Build> takes advantage of dynamic requirements, so only
-modules that are needed for the specific type of install need to be loaded.  Here are the
-different types of requirements:
-
-=over
-
-=item configure
-
-Configure requirements should already be installed before the alienfile is loaded.
-
-=item any
-
-"Any" requirements are those that are needed either for the probe stage, or in either the
-system or share installs.
-
-=item share
-
-Share requirements are those modules needed when downloading and building from source.
-
-=item system
-
-System requirements are those modules needed when the system provides the library or tool.
-
-=back
-
-=head2 plugin
-
- plugin $name => (%args);
- plugin $name => $arg;
-
-Load the given plugin.  If you prefix the plugin name with an C<=> sign,
-then it will be assumed to be a fully qualified path name.  Otherwise the
-plugin will be assumed to live in the C<Alien::Build::Plugin> namespace.
-If there is an appropriate negotiate plugin, that one will be loaded.
-Examples:
-
- # Loads Alien::Build::Plugin::Fetch::Negotiate
- # which will pick the best Alien::Build::Plugin::Fetch
- # plugin based on the URL, and system configuration
- plugin 'Fetch' => 'http://ftp.gnu.org/gnu/gcc';
- 
- # loads the plugin with the badly named class!
- plugin '=Badly::Named::Plugin::Not::In::Alien::Build::Namespace';
- 
- # explicitly loads Alien::Build::Plugin::Prefer::SortVersions
- plugin 'Prefer::SortVersions' => (
-   filter => qr/^gcc-.*\.tar\.gz$/,
-   version => qr/([0-9\.]+)/,
- );
-
-=head2 probe
-
- probe \&code;
- probe \@commandlist;
-
-Instructions for the probe stage.  May be either a code reference, or a command list.
-Multiple probes and probe plugins can be given.  These will be used in sequence,
-stopping at the first that detects a system installation.  L<Alien::Build> will use
-a share install if no system installation is detected by the probes.
-
-=head2 configure
-
- configure {
-   ...
- };
-
-Configure block.  The only directive allowed in a configure block is
-requires.
-
-=head2 sys
-
- sys {
-   ...
- };
-
-System block.  Allowed directives are: requires and gather.
-
-=head2 share
-
- share {
-   ...
- };
-
-System block.  Allowed directives are: download, fetch, decode, prefer, extract, build, gather.
-
-=head2 start_url
-
- share {
-   start_url $url;
- };
-
-Set the start URL for download.  This should be the URL to an index page, or the actual tarball of the source.
-
-=head2 digest
-
-[experimental]
-
- share {
-   digest $algorithm, $digest;
- };
-
-Check fetched and downloaded files against the given algorithm and
-digest.  Typically you will want to use SHA256 as the algorithm.
-
-=head2 download
-
- share {
-   download \&code;
-   download \@commandlist;
- };
-
-Instructions for the download stage.  May be either a
-code reference, or a command list.
-
-=head2 fetch
-
- share {
-   fetch \&code;
-   fetch \@commandlist;
- };
-
-Instructions for the fetch stage.  May be either a
-code reference, or a command list.
-
-=head2 decode
-
- share {
-   decode \&code;
-   decode \@commandlist;
- };
-
-Instructions for the decode stage.  May be either a
-code reference, or a command list.
-
-=head2 prefer
-
- share {
-   prefer \&code;
-   prefer \@commandlist;
- };
-
-Instructions for the prefer stage.  May be either a
-code reference, or a command list.
-
-=head2 extract
-
- share {
-   extract \&code;
-   extract \@commandlist;
- };
-
-Instructions for the extract stage.  May be either a
-code reference, or a command list.
-
-=head2 patch
-
- share {
-   patch \&code;
-   patch \@commandlist;
- };
-
-Instructions for the patch stage.  May be either a
-code reference, or a command list.
-
-=head2 patch_ffi
-
- share {
-   patch_ffi \&code;
-   patch_ffi \@commandlist;
- };
-
-[DEPRECATED]
-
-Instructions for the patch_ffi stage.  May be either a
-code reference, or a command list.
-
-=head2 build
-
- share {
-   build \&code;
-   build \@commandlist;
- };
-
-Instructions for the build stage.  May be either a
-code reference, or a command list.
-
-=head2 build_ffi
-
- share {
-   build \&code;
-   build \@commandlist;
- };
-
-[DEPRECATED]
-
-Instructions for the build FFI stage.  Builds shared libraries instead of static.
-This is optional, and is only necessary if a fresh and separate build needs to be
-done for FFI.
-
-=head2 gather
-
- gather \&code;
- gather \@commandlist;
- 
- share {
-   gather \&code;
-   gather \@commandlist;
- };
- 
- sys {
-   gather \&code;
-   gather \@commandlist;
- };
-
-Instructions for the gather stage.  May be either a code reference, or a command list.
-In the root block of the alienfile it will trigger in both share and system build.
-In the share or sys block it will only trigger in the corresponding build.
-
-=head2 gather_ffi
-
- share {
-   gather_ffi \&code;
-   gather_ffi \@commandlist;
- }
-
-[DEPRECATED]
-
-Gather specific to C<build_ffi>.  Not usually necessary.
-
-=head2 ffi
-
- share {
-   ffi {
-     patch \&code;
-     patch \@commandlist;
-     build \&code;
-     build \@commandlist;
-     gather \&code;
-     gather \@commandlist;
-   }
- }
-
-Specify patch, build or gather stages related to FFI.
-
-=head2 meta_prop
-
- my $hash = meta_prop;
-
-Get the meta_prop hash reference.
-
-=head2 meta
-
- my $meta = meta;
-
-Returns the meta object for your L<alienfile>.  For methods that can be used on the
-meta object, see L<Alien::Build/"META METHODS">.
-
-=head2 log
-
- log($message);
-
-Prints the given log to stdout.
-
-=head2 test
-
- share {
-   test \&code;
-   test \@commandlist;
- };
- sys {
-   test \&code;
-   test \@commandlist;
- };
-
-Run the tests
-
-=head2 before
-
- before $stage => \&code;
-
-Execute the given code before the given stage.  Stage should be one of
-C<probe>, C<download>, C<fetch>, C<decode>, C<prefer>, C<extract>,
-C<patch>, C<build>, C<test>, and C<gather>.
-
-The before directive is only legal in the same blocks as the stage would
-normally be legal in.  For example, you can't do this:
-
- use alienfile;
- 
- sys {
-   before 'build' => sub {
-     ...
-   };
- };
-
-Because a C<build> wouldn't be legal inside a C<sys> block.
-
-=head2 after
-
- after $stage => \&code;
-
-Execute the given code after the given stage.  Stage should be one of
-C<probe>, C<download>, C<fetch>, C<decode>, C<prefer>, C<extract>,
-C<patch>, C<build>, C<test>, and C<gather>.
-
-The after directive is only legal in the same blocks as the stage would
-normally be legal in.  For example, you can't do this:
-
- use alienfile;
- 
- sys {
-   after 'build' => sub {
-     ...
-   };
- };
-
-Because a C<build> wouldn't be legal inside a C<sys> block.
-
-=head1 SEE ALSO
-
-=over 4
-
-=item L<Alien>
-
-=item L<Alien::Build>
-
-=item L<Alien::Build::MM>
-
-=item L<Alien::Base>
-
-=back
-
-=head1 AUTHOR
-
-Author: Graham Ollis E<lt>plicease@cpan.orgE<gt>
-
-Contributors:
-
-Diab Jerius (DJERIUS)
-
-Roy Storey (KIWIROY)
-
-Ilya Pavlov
-
-David Mertens (run4flat)
-
-Mark Nunberg (mordy, mnunberg)
-
-Christian Walde (Mithaldu)
-
-Brian Wightman (MidLifeXis)
-
-Zaki Mughal (zmughal)
-
-mohawk (mohawk2, ETJ)
-
-Vikas N Kumar (vikasnkumar)
-
-Flavio Poletti (polettix)
-
-Salvador Fandiño (salva)
-
-Gianni Ceccarelli (dakkar)
-
-Pavel Shaydo (zwon, trinitum)
-
-Kang-min Liu (劉康民, gugod)
-
-Nicholas Shipp (nshp)
-
-Juan Julián Merelo Guervós (JJ)
-
-Joel Berger (JBERGER)
-
-Petr Písař (ppisar)
-
-Lance Wicks (LANCEW)
-
-Ahmad Fatoum (a3f, ATHREEF)
-
-José Joaquín Atria (JJATRIA)
-
-Duke Leto (LETO)
-
-Shoichi Kaji (SKAJI)
-
-Shawn Laffan (SLAFFAN)
-
-Paul Evans (leonerd, PEVANS)
-
-Håkon Hægland (hakonhagland, HAKONH)
-
-nick nauwelaerts (INPHOBIA)
-
-Florian Weimer
-
-=head1 COPYRIGHT AND LICENSE
-
-This software is copyright (c) 2011-2022 by Graham Ollis.
-
-This is free software; you can redistribute it and/or modify it under
-the same terms as the Perl 5 programming language system itself.
-
-=cut