javonet-nodejs-sdk 2.0.5 → 2.1.0

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/http_cat.al

@@ -1,34 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1678 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/http_cat.al)"
-sub http_cat { # address, port, message --> returns reply / (reply,errs,cert)
-    my ($dest_serv, $port, $out_message) = @_;
-    my ($got, $errs, $written);
-
-    ($got, $errs) = open_proxy_tcp_connection($dest_serv, $port);
-    return (wantarray ? (undef, $errs) : undef) unless $got;
-
-    ### Connected. Exchange some data (doing repeated tries if necessary).
-
-    warn "http_cat $$: sending " . blength($out_message) . " bytes...\n"
-	if $trace==3;
-    warn "http_cat $$: sending `$out_message' (" . blength($out_message)
-	. " bytes)...\n" if $trace>3;
-    ($written, $errs) = tcp_write_all($out_message);
-    goto cleanup unless $written;
-
-    warn "waiting for reply...\n" if $trace>2;
-    ($got, $errs) = tcp_read_all();
-    warn "Got " . blength($got) . " bytes.\n" if $trace==3;
-    warn "Got `$got' (" . blength($got) . " bytes)\n" if $trace>3;
-
-cleanup:
-    close SSLCAT_S;
-    return wantarray ? ($got, $errs) : $got;
-}
-
-# end of Net::SSLeay::http_cat
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/https_cat.al

@@ -1,95 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1591 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/https_cat.al)"
-###
-### Basic request - response primitive, this is different from sslcat
-###                 because this does not shutdown the connection.
-###
-
-sub https_cat { # address, port, message --> returns reply / (reply,errs,cert)
-    my ($dest_serv, $port, $out_message, $crt_path, $key_path) = @_;
-    my ($ctx, $ssl, $got, $errs, $written);
-
-    ($got, $errs) = open_proxy_tcp_connection($dest_serv, $port);
-    return (wantarray ? (undef, $errs) : undef) unless $got;
-
-    ### Do SSL negotiation stuff
-
-    warn "Creating SSL $ssl_version context...\n" if $trace>2;
-    initialize();
-
-    $ctx = new_x_ctx();
-    goto cleanup2 if $errs = print_errs('CTX_new') or !$ctx;
-
-    CTX_set_options($ctx, &OP_ALL);
-    goto cleanup2 if $errs = print_errs('CTX_set_options');
-
-    warn "Cert `$crt_path' given without key" if $crt_path && !$key_path;
-    set_cert_and_key($ctx, $crt_path, $key_path) if $crt_path;
-
-    warn "Creating SSL connection (context was '$ctx')...\n" if $trace>2;
-    $ssl = new($ctx);
-    goto cleanup if $errs = print_errs('SSL_new') or !$ssl;
-
-    warn "Setting fd (ctx $ctx, con $ssl)...\n" if $trace>2;
-    set_fd($ssl, fileno(SSLCAT_S));
-    goto cleanup if $errs = print_errs('set_fd');
-
-    warn "Entering SSL negotiation phase...\n" if $trace>2;
-
-    if ($trace>2) {
-	my $i = 0;
-	my $p = '';
-	my $cipher_list = 'Cipher list: ';
-	$p=Net::SSLeay::get_cipher_list($ssl,$i);
-	$cipher_list .= $p if $p;
-	do {
-	    $i++;
-	    $cipher_list .= ', ' . $p if $p;
-	    $p=Net::SSLeay::get_cipher_list($ssl,$i);
-	} while $p;
-	$cipher_list .= '\n';
-	warn $cipher_list;
-    }
-
-    $got = Net::SSLeay::connect($ssl);
-    warn "SSLeay connect failed" if $trace>2 && $got==0;
-    goto cleanup if $errs = print_errs('SSL_connect');
-
-    my $server_cert = get_peer_certificate($ssl);
-    print_errs('get_peer_certificate');
-    if ($trace>1) {
-	warn "Cipher `" . get_cipher($ssl) . "'\n";
-	print_errs('get_ciper');
-	warn dump_peer_certificate($ssl);
-    }
-
-    ### Connected. Exchange some data (doing repeated tries if necessary).
-
-    warn "https_cat $$: sending " . blength($out_message) . " bytes...\n"
-	if $trace==3;
-    warn "https_cat $$: sending `$out_message' (" . blength($out_message)
-	. " bytes)...\n" if $trace>3;
-    ($written, $errs) = ssl_write_all($ssl, $out_message);
-    goto cleanup unless $written;
-
-    warn "waiting for reply...\n" if $trace>2;
-    ($got, $errs) = ssl_read_all($ssl);
-    warn "Got " . blength($got) . " bytes.\n" if $trace==3;
-    warn "Got `$got' (" . blength($got) . " bytes)\n" if $trace>3;
-
-cleanup:
-    free ($ssl);
-    $errs .= print_errs('SSL_free');
-cleanup2:
-    CTX_free ($ctx);
-    $errs .= print_errs('CTX_free');
-    close SSLCAT_S;
-    return wantarray ? ($got, $errs, $server_cert) : $got;
-}
-
-# end of Net::SSLeay::https_cat
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/httpx_cat.al

@@ -1,18 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1704 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/httpx_cat.al)"
-sub httpx_cat {
-    my ($usessl, $site, $port, $req, $crt_path, $key_path) = @_;
-    warn "httpx_cat: usessl=$usessl ($site:$port)" if $trace;
-    if ($usessl) {
-	return https_cat($site, $port, $req, $crt_path, $key_path);
-    } else {
-	return http_cat($site, $port, $req);
-    }
-}
-
-# end of Net::SSLeay::httpx_cat
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/initialize.al

@@ -1,27 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1444 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/initialize.al)"
-###
-### Standard initialisation. Initialise the ssl library in the usual way
-###  at most once. Override this if you need differnet initialisation
-###  SSLeay_add_ssl_algorithms is also protected against multiple runs in SSLeay.xs
-###  and is also mutex protected in threading perls
-###
-
-my $library_initialised;
-sub initialize
-{
-    if (!$library_initialised)
-    {
-	load_error_strings();         # Some bloat, but I'm after ease of use
-	SSLeay_add_ssl_algorithms();  # and debuggability.
-	randomize();
-	$library_initialised++;
-    }
-}
-
-# end of Net::SSLeay::initialize
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/make_form.al

@@ -1,25 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1744 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/make_form.al)"
-###
-### Easy https manipulation routines
-###
-
-sub make_form {
-    my (@fields) = @_;
-    my $form;
-    while (@fields) {
-	my ($name, $data) = (shift(@fields), shift(@fields));
-	$data =~ s/([^\w\-.\@\$ ])/sprintf("%%%2.2x",ord($1))/gse;
-    	$data =~ tr[ ][+];
-	$form .= "$name=$data&";
-    }
-    chop $form;
-    return $form;
-}
-
-# end of Net::SSLeay::make_form
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/make_headers.al

@@ -1,21 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1761 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/make_headers.al)"
-sub make_headers {
-    my (@headers) = @_;
-    my $headers;
-    while (@headers) {
-	my $header = shift(@headers);
-	my $value = shift(@headers);
-	$header =~ s/:$//;
-	$value =~ s/\x0d?\x0a$//; # because we add it soon, see below
-	$headers .= "$header: $value$CRLF";
-    }
-    return $headers;
-}
-
-# end of Net::SSLeay::make_headers
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/new_x_ctx.al

@@ -1,51 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1401 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/new_x_ctx.al)"
-sub new_x_ctx {
-    if ($ssl_version == 2)  {
-	unless (exists &Net::SSLeay::CTX_v2_new) {
-	    warn "ssl_version has been set to 2, but this version of OpenSSL has been compiled without SSLv2 support";
-	    return undef;
-	}
-	$ctx = CTX_v2_new();
-    }
-    elsif ($ssl_version == 3)  { $ctx = CTX_v3_new(); }
-    elsif ($ssl_version == 10) { $ctx = CTX_tlsv1_new(); }
-    elsif ($ssl_version == 11) {
-	unless (exists &Net::SSLeay::CTX_tlsv1_1_new) {
-	    warn "ssl_version has been set to 11, but this version of OpenSSL has been compiled without TLSv1.1 support";
-	    return undef;
-	}
-        $ctx = CTX_tlsv1_1_new;
-    }
-    elsif ($ssl_version == 12) {
-	unless (exists &Net::SSLeay::CTX_tlsv1_2_new) {
-	    warn "ssl_version has been set to 12, but this version of OpenSSL has been compiled without TLSv1.2 support";
-	    return undef;
-	}
-        $ctx = CTX_tlsv1_2_new;
-    }
-    elsif ($ssl_version == 13) {
-	unless (eval { Net::SSLeay::TLS1_3_VERSION(); } ) {
-	    warn "ssl_version has been set to 13, but this version of OpenSSL has been compiled without TLSv1.3 support";
-	    return undef;
-	}
-        $ctx = CTX_new();
-        unless(Net::SSLeay::CTX_set_min_proto_version($ctx, Net::SSLeay::TLS1_3_VERSION())) {
-            warn "CTX_set_min_proto failed for TLSv1.3";
-            return undef;
-        }
-        unless(Net::SSLeay::CTX_set_max_proto_version($ctx, Net::SSLeay::TLS1_3_VERSION())) {
-            warn "CTX_set_max_proto failed for TLSv1.3";
-            return undef;
-        }
-    }
-    else                       { $ctx = CTX_new(); }
-    return $ctx;
-}
-
-# end of Net::SSLeay::new_x_ctx
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/open_proxy_tcp_connection.al

@@ -1,31 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 959 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/open_proxy_tcp_connection.al)"
-### Open connection via standard web proxy, if one was defined
-### using set_proxy().
-
-sub open_proxy_tcp_connection {
-    my ($dest_serv, $port) = @_;
-    return open_tcp_connection($dest_serv, $port) if !$proxyhost;
-
-    warn "Connect via proxy: $proxyhost:$proxyport" if $trace>2;
-    my ($ret, $errs) = open_tcp_connection($proxyhost, $proxyport);
-    return wantarray ? (0, $errs) : 0 if !$ret;  # Connection fail
-
-    warn "Asking proxy to connect to $dest_serv:$port" if $trace>2;
-    #print SSLCAT_S "CONNECT $dest_serv:$port HTTP/1.0$proxyauth$CRLF$CRLF";
-    #my $line = <SSLCAT_S>;   # *** bug? Mixing stdio with syscall read?
-    ($ret, $errs) =
-	tcp_write_all("CONNECT $dest_serv:$port HTTP/1.0$proxyauth$CRLF$CRLF");
-    return wantarray ? (0,$errs) : 0 if $errs;
-    ($line, $errs) = tcp_read_until($CRLF . $CRLF, 1024);
-    warn "Proxy response: $line" if $trace>2;
-    return wantarray ? (0,$errs) : 0 if $errs;
-    return wantarray ? (1,'') : 1;  # Success
-}
-
-# end of Net::SSLeay::open_proxy_tcp_connection
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/open_tcp_connection.al

@@ -1,40 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 927 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/open_tcp_connection.al)"
-sub open_tcp_connection {
-    my ($dest_serv, $port) = @_;
-    my ($errs);
-
-    $port = getservbyname($port, 'tcp') unless $port =~ /^\d+$/;
-    my $dest_serv_ip = gethostbyname($dest_serv);
-    unless (defined($dest_serv_ip)) {
-	$errs = "$0 $$: open_tcp_connection: destination host not found:"
-            . " `$dest_serv' (port $port) ($!)\n";
-	warn $errs if $trace;
-        return wantarray ? (0, $errs) : 0;
-    }
-    my $sin = sockaddr_in($port, $dest_serv_ip);
-
-    warn "Opening connection to $dest_serv:$port (" .
-	inet_ntoa($dest_serv_ip) . ")" if $trace>2;
-
-    my $proto = &Socket::IPPROTO_TCP; # getprotobyname('tcp') not available on android
-    if (socket (SSLCAT_S, &PF_INET(), &SOCK_STREAM(), $proto)) {
-        warn "next connect" if $trace>3;
-        if (CORE::connect (SSLCAT_S, $sin)) {
-            my $old_out = select (SSLCAT_S); $| = 1; select ($old_out);
-            warn "connected to $dest_serv, $port" if $trace>3;
-            return wantarray ? (1, undef) : 1; # Success
-        }
-    }
-    $errs = "$0 $$: open_tcp_connection: failed `$dest_serv', $port ($!)\n";
-    warn $errs if $trace;
-    close SSLCAT_S;
-    return wantarray ? (0, $errs) : 0; # Fail
-}
-
-# end of Net::SSLeay::open_tcp_connection
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_http.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1861 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_http.al)"
-sub post_http { do_httpx2(POST => 0, @_) }
-# end of Net::SSLeay::post_http
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_http3.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1866 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_http3.al)"
-sub post_http3 { do_httpx3(POST => 0, @_) }
-# end of Net::SSLeay::post_http3
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_http4.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1871 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_http4.al)"
-sub post_http4 { do_httpx4(POST => 0, @_) }
-# end of Net::SSLeay::post_http4
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_https.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1844 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_https.al)"
-sub post_https { do_httpx2(POST => 1, @_) }
-# end of Net::SSLeay::post_https
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_https3.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1849 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_https3.al)"
-sub post_https3 { do_httpx3(POST => 1, @_) }
-# end of Net::SSLeay::post_https3
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_https4.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1854 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_https4.al)"
-sub post_https4 { do_httpx4(POST => 1, @_) }
-# end of Net::SSLeay::post_https4
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_httpx.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1878 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_httpx.al)"
-sub post_httpx { do_httpx2(POST => @_) }
-# end of Net::SSLeay::post_httpx
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_httpx3.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1883 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_httpx3.al)"
-sub post_httpx3 { do_httpx3(POST => @_) }
-# end of Net::SSLeay::post_httpx3
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_httpx4.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1888 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_httpx4.al)"
-sub post_httpx4 { do_httpx4(POST => @_) }
-# end of Net::SSLeay::post_httpx4
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_http.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1862 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_http.al)"
-sub put_http  { do_httpx2(PUT  => 0, @_) }
-# end of Net::SSLeay::put_http
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_http3.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1867 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_http3.al)"
-sub put_http3  { do_httpx3(PUT  => 0, @_) }
-# end of Net::SSLeay::put_http3
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_http4.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1872 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_http4.al)"
-sub put_http4  { do_httpx4(PUT  => 0, @_) }
-# end of Net::SSLeay::put_http4
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_https.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1845 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_https.al)"
-sub put_https  { do_httpx2(PUT  => 1, @_) }
-# end of Net::SSLeay::put_https
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_https3.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1850 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_https3.al)"
-sub put_https3  { do_httpx3(PUT  => 1, @_) }
-# end of Net::SSLeay::put_https3
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_https4.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1855 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_https4.al)"
-sub put_https4  { do_httpx4(PUT  => 1, @_) }
-# end of Net::SSLeay::put_https4
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_httpx.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1879 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_httpx.al)"
-sub put_httpx  { do_httpx2(PUT  => @_) }
-# end of Net::SSLeay::put_httpx
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_httpx3.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1884 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_httpx3.al)"
-sub put_httpx3  { do_httpx3(PUT  => @_) }
-# end of Net::SSLeay::put_httpx3
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_httpx4.al

@@ -1,9 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1889 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_httpx4.al)"
-sub put_httpx4  { do_httpx4(PUT  => @_) }
-# end of Net::SSLeay::put_httpx4
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/randomize.al

@@ -1,31 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1378 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/randomize.al)"
-### Arrange some randomness for eay PRNG
-
-sub randomize (;$$$) {
-    my ($rn_seed_file, $seed, $egd_path) = @_;
-    my $rnsf = defined($rn_seed_file) && -r $rn_seed_file;
-
-	$egd_path = '';
-    $egd_path = $ENV{'EGD_PATH'} if $ENV{'EGD_PATH'};
-
-    RAND_seed(rand() + $$);  # Stir it with time and pid
-
-    unless ($rnsf || -r $Net::SSLeay::random_device || $seed || -S $egd_path) {
-	my $poll_retval = Net::SSLeay::RAND_poll();
-	warn "Random number generator not seeded!!!" if $trace && !$poll_retval;
-    }
-
-    RAND_load_file($rn_seed_file, -s _) if $rnsf;
-    RAND_seed($seed) if $seed;
-    RAND_seed($ENV{RND_SEED}) if $ENV{RND_SEED};
-    RAND_load_file($Net::SSLeay::random_device, $Net::SSLeay::how_random/8)
-	if -r $Net::SSLeay::random_device;
-}
-
-# end of Net::SSLeay::randomize
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/set_cert_and_key.al

@@ -1,23 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1714 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/set_cert_and_key.al)"
-###
-### Easy set up of private key and certificate
-###
-
-sub set_cert_and_key ($$$) {
-    my ($ctx, $cert_path, $key_path) = @_;
-    my $errs = '';
-    # Following will ask password unless private key is not encrypted
-    CTX_use_PrivateKey_file( $ctx, $key_path, &FILETYPE_PEM ) == 1
-        or $errs .= print_errs("private key `$key_path' ($!)");
-    CTX_use_certificate_file ($ctx, $cert_path, &FILETYPE_PEM) == 1
-        or $errs .= print_errs("certificate `$cert_path' ($!)");
-    return wantarray ? (undef, $errs) : ($errs eq '');
-}
-
-# end of Net::SSLeay::set_cert_and_key
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/set_proxy.al

@@ -1,17 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1735 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/set_proxy.al)"
-sub set_proxy ($$;**) {
-    ($proxyhost, $proxyport, $proxyuser, $proxypass) = @_;
-    require MIME::Base64 if $proxyuser;
-    $proxyauth = $proxyuser
-         ? $CRLF . 'Proxy-authorization: Basic '
-	 . MIME::Base64::encode("$proxyuser:$proxypass", '')
-	 : '';
-}
-
-# end of Net::SSLeay::set_proxy
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/set_server_cert_and_key.al

@@ -1,14 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1729 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/set_server_cert_and_key.al)"
-### Old deprecated API
-
-sub set_server_cert_and_key ($$$) { &set_cert_and_key }
-
-### Set up to use web proxy
-
-# end of Net::SSLeay::set_server_cert_and_key
-1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/ssl_read_CRLF.al

@@ -1,10 +0,0 @@
-# NOTE: Derived from blib/lib/Net/SSLeay.pm.
-# Changes made here will be lost when autosplit is run again.
-# See AutoSplit.pm.
-package Net::SSLeay;
-
-#line 1322 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/ssl_read_CRLF.al)"
-# ssl_read_CRLF($ssl [, $max_length])
-sub ssl_read_CRLF ($;$) { ssl_read_until($_[0], $CRLF, $_[1]) }
-# end of Net::SSLeay::ssl_read_CRLF
-1;