jassub 1.7.13 → 1.7.14

package/dist/libraries/include/freetype2/freetype/ftmoderr.h

@@ -1,204 +0,0 @@
-/****************************************************************************
- *
- * ftmoderr.h
- *
- *   FreeType module error offsets (specification).
- *
- * Copyright (C) 2001-2021 by
- * David Turner, Robert Wilhelm, and Werner Lemberg.
- *
- * This file is part of the FreeType project, and may only be used,
- * modified, and distributed under the terms of the FreeType project
- * license, LICENSE.TXT.  By continuing to use, modify, or distribute
- * this file you indicate that you have read the license and
- * understand and accept it fully.
- *
- */
-
-
-  /**************************************************************************
-   *
-   * This file is used to define the FreeType module error codes.
-   *
-   * If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is
-   * set, the lower byte of an error value identifies the error code as
-   * usual.  In addition, the higher byte identifies the module.  For
-   * example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the
-   * error `TT_Err_Invalid_File_Format` has value 0x1303, the error
-   * `T1_Err_Invalid_File_Format` has value 0x1403, etc.
-   *
-   * Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero,
-   * including the high byte.
-   *
-   * If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an
-   * error value is set to zero.
-   *
-   * To hide the various `XXX_Err_` prefixes in the source code, FreeType
-   * provides some macros in `fttypes.h`.
-   *
-   *   FT_ERR( err )
-   *
-   *     Add current error module prefix (as defined with the `FT_ERR_PREFIX`
-   *     macro) to `err`.  For example, in the BDF module the line
-   *
-   *     ```
-   *       error = FT_ERR( Invalid_Outline );
-   *     ```
-   *
-   *     expands to
-   *
-   *     ```
-   *       error = BDF_Err_Invalid_Outline;
-   *     ```
-   *
-   *     For simplicity, you can always use `FT_Err_Ok` directly instead of
-   *     `FT_ERR( Ok )`.
-   *
-   *   FT_ERR_EQ( errcode, err )
-   *   FT_ERR_NEQ( errcode, err )
-   *
-   *     Compare error code `errcode` with the error `err` for equality and
-   *     inequality, respectively.  Example:
-   *
-   *     ```
-   *       if ( FT_ERR_EQ( error, Invalid_Outline ) )
-   *         ...
-   *     ```
-   *
-   *     Using this macro you don't have to think about error prefixes.  Of
-   *     course, if module errors are not active, the above example is the
-   *     same as
-   *
-   *     ```
-   *       if ( error == FT_Err_Invalid_Outline )
-   *         ...
-   *     ```
-   *
-   *   FT_ERROR_BASE( errcode )
-   *   FT_ERROR_MODULE( errcode )
-   *
-   *     Get base error and module error code, respectively.
-   *
-   * It can also be used to create a module error message table easily with
-   * something like
-   *
-   * ```
-   *   #undef FTMODERR_H_
-   *   #define FT_MODERRDEF( e, v, s )  { FT_Mod_Err_ ## e, s },
-   *   #define FT_MODERR_START_LIST     {
-   *   #define FT_MODERR_END_LIST       { 0, 0 } };
-   *
-   *   const struct
-   *   {
-   *     int          mod_err_offset;
-   *     const char*  mod_err_msg
-   *   } ft_mod_errors[] =
-   *
-   *   #include <freetype/ftmoderr.h>
-   * ```
-   *
-   */
-
-
-#ifndef FTMODERR_H_
-#define FTMODERR_H_
-
-
-  /*******************************************************************/
-  /*******************************************************************/
-  /*****                                                         *****/
-  /*****                       SETUP MACROS                      *****/
-  /*****                                                         *****/
-  /*******************************************************************/
-  /*******************************************************************/
-
-
-#undef  FT_NEED_EXTERN_C
-
-#ifndef FT_MODERRDEF
-
-#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
-#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = v,
-#else
-#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = 0,
-#endif
-
-#define FT_MODERR_START_LIST  enum {
-#define FT_MODERR_END_LIST    FT_Mod_Err_Max };
-
-#ifdef __cplusplus
-#define FT_NEED_EXTERN_C
-  extern "C" {
-#endif
-
-#endif /* !FT_MODERRDEF */
-
-
-  /*******************************************************************/
-  /*******************************************************************/
-  /*****                                                         *****/
-  /*****               LIST MODULE ERROR BASES                   *****/
-  /*****                                                         *****/
-  /*******************************************************************/
-  /*******************************************************************/
-
-
-#ifdef FT_MODERR_START_LIST
-  FT_MODERR_START_LIST
-#endif
-
-
-  FT_MODERRDEF( Base,      0x000, "base module" )
-  FT_MODERRDEF( Autofit,   0x100, "autofitter module" )
-  FT_MODERRDEF( BDF,       0x200, "BDF module" )
-  FT_MODERRDEF( Bzip2,     0x300, "Bzip2 module" )
-  FT_MODERRDEF( Cache,     0x400, "cache module" )
-  FT_MODERRDEF( CFF,       0x500, "CFF module" )
-  FT_MODERRDEF( CID,       0x600, "CID module" )
-  FT_MODERRDEF( Gzip,      0x700, "Gzip module" )
-  FT_MODERRDEF( LZW,       0x800, "LZW module" )
-  FT_MODERRDEF( OTvalid,   0x900, "OpenType validation module" )
-  FT_MODERRDEF( PCF,       0xA00, "PCF module" )
-  FT_MODERRDEF( PFR,       0xB00, "PFR module" )
-  FT_MODERRDEF( PSaux,     0xC00, "PS auxiliary module" )
-  FT_MODERRDEF( PShinter,  0xD00, "PS hinter module" )
-  FT_MODERRDEF( PSnames,   0xE00, "PS names module" )
-  FT_MODERRDEF( Raster,    0xF00, "raster module" )
-  FT_MODERRDEF( SFNT,     0x1000, "SFNT module" )
-  FT_MODERRDEF( Smooth,   0x1100, "smooth raster module" )
-  FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
-  FT_MODERRDEF( Type1,    0x1300, "Type 1 module" )
-  FT_MODERRDEF( Type42,   0x1400, "Type 42 module" )
-  FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
-  FT_MODERRDEF( GXvalid,  0x1600, "GX validation module" )
-  FT_MODERRDEF( Sdf,      0x1700, "Signed distance field raster module" )
-
-
-#ifdef FT_MODERR_END_LIST
-  FT_MODERR_END_LIST
-#endif
-
-
-  /*******************************************************************/
-  /*******************************************************************/
-  /*****                                                         *****/
-  /*****                      CLEANUP                            *****/
-  /*****                                                         *****/
-  /*******************************************************************/
-  /*******************************************************************/
-
-
-#ifdef FT_NEED_EXTERN_C
-  }
-#endif
-
-#undef FT_MODERR_START_LIST
-#undef FT_MODERR_END_LIST
-#undef FT_MODERRDEF
-#undef FT_NEED_EXTERN_C
-
-
-#endif /* FTMODERR_H_ */
-
-
-/* END */

package/dist/libraries/include/freetype2/freetype/ftotval.h

@@ -1,206 +0,0 @@
-/****************************************************************************
- *
- * ftotval.h
- *
- *   FreeType API for validating OpenType tables (specification).
- *
- * Copyright (C) 2004-2021 by
- * David Turner, Robert Wilhelm, and Werner Lemberg.
- *
- * This file is part of the FreeType project, and may only be used,
- * modified, and distributed under the terms of the FreeType project
- * license, LICENSE.TXT.  By continuing to use, modify, or distribute
- * this file you indicate that you have read the license and
- * understand and accept it fully.
- *
- */
-
-
-/****************************************************************************
- *
- *
- * Warning: This module might be moved to a different library in the
- *          future to avoid a tight dependency between FreeType and the
- *          OpenType specification.
- *
- *
- */
-
-
-#ifndef FTOTVAL_H_
-#define FTOTVAL_H_
-
-#include <freetype/freetype.h>
-
-#ifdef FREETYPE_H
-#error "freetype.h of FreeType 1 has been loaded!"
-#error "Please fix the directory search order for header files"
-#error "so that freetype.h of FreeType 2 is found first."
-#endif
-
-
-FT_BEGIN_HEADER
-
-
-  /**************************************************************************
-   *
-   * @section:
-   *   ot_validation
-   *
-   * @title:
-   *   OpenType Validation
-   *
-   * @abstract:
-   *   An API to validate OpenType tables.
-   *
-   * @description:
-   *   This section contains the declaration of functions to validate some
-   *   OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).
-   *
-   * @order:
-   *   FT_OpenType_Validate
-   *   FT_OpenType_Free
-   *
-   *   FT_VALIDATE_OTXXX
-   *
-   */
-
-
-  /**************************************************************************
-   *
-   * @enum:
-   *    FT_VALIDATE_OTXXX
-   *
-   * @description:
-   *    A list of bit-field constants used with @FT_OpenType_Validate to
-   *    indicate which OpenType tables should be validated.
-   *
-   * @values:
-   *    FT_VALIDATE_BASE ::
-   *      Validate BASE table.
-   *
-   *    FT_VALIDATE_GDEF ::
-   *      Validate GDEF table.
-   *
-   *    FT_VALIDATE_GPOS ::
-   *      Validate GPOS table.
-   *
-   *    FT_VALIDATE_GSUB ::
-   *      Validate GSUB table.
-   *
-   *    FT_VALIDATE_JSTF ::
-   *      Validate JSTF table.
-   *
-   *    FT_VALIDATE_MATH ::
-   *      Validate MATH table.
-   *
-   *    FT_VALIDATE_OT ::
-   *      Validate all OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).
-   *
-   */
-#define FT_VALIDATE_BASE  0x0100
-#define FT_VALIDATE_GDEF  0x0200
-#define FT_VALIDATE_GPOS  0x0400
-#define FT_VALIDATE_GSUB  0x0800
-#define FT_VALIDATE_JSTF  0x1000
-#define FT_VALIDATE_MATH  0x2000
-
-#define FT_VALIDATE_OT  ( FT_VALIDATE_BASE | \
-                          FT_VALIDATE_GDEF | \
-                          FT_VALIDATE_GPOS | \
-                          FT_VALIDATE_GSUB | \
-                          FT_VALIDATE_JSTF | \
-                          FT_VALIDATE_MATH )
-
-
-  /**************************************************************************
-   *
-   * @function:
-   *    FT_OpenType_Validate
-   *
-   * @description:
-   *    Validate various OpenType tables to assure that all offsets and
-   *    indices are valid.  The idea is that a higher-level library that
-   *    actually does the text layout can access those tables without error
-   *    checking (which can be quite time consuming).
-   *
-   * @input:
-   *    face ::
-   *      A handle to the input face.
-   *
-   *    validation_flags ::
-   *      A bit field that specifies the tables to be validated.  See
-   *      @FT_VALIDATE_OTXXX for possible values.
-   *
-   * @output:
-   *    BASE_table ::
-   *      A pointer to the BASE table.
-   *
-   *    GDEF_table ::
-   *      A pointer to the GDEF table.
-   *
-   *    GPOS_table ::
-   *      A pointer to the GPOS table.
-   *
-   *    GSUB_table ::
-   *      A pointer to the GSUB table.
-   *
-   *    JSTF_table ::
-   *      A pointer to the JSTF table.
-   *
-   * @return:
-   *   FreeType error code.  0~means success.
-   *
-   * @note:
-   *   This function only works with OpenType fonts, returning an error
-   *   otherwise.
-   *
-   *   After use, the application should deallocate the five tables with
-   *   @FT_OpenType_Free.  A `NULL` value indicates that the table either
-   *   doesn't exist in the font, or the application hasn't asked for
-   *   validation.
-   */
-  FT_EXPORT( FT_Error )
-  FT_OpenType_Validate( FT_Face    face,
-                        FT_UInt    validation_flags,
-                        FT_Bytes  *BASE_table,
-                        FT_Bytes  *GDEF_table,
-                        FT_Bytes  *GPOS_table,
-                        FT_Bytes  *GSUB_table,
-                        FT_Bytes  *JSTF_table );
-
-
-  /**************************************************************************
-   *
-   * @function:
-   *    FT_OpenType_Free
-   *
-   * @description:
-   *    Free the buffer allocated by OpenType validator.
-   *
-   * @input:
-   *    face ::
-   *      A handle to the input face.
-   *
-   *    table ::
-   *      The pointer to the buffer that is allocated by
-   *      @FT_OpenType_Validate.
-   *
-   * @note:
-   *   This function must be used to free the buffer allocated by
-   *   @FT_OpenType_Validate only.
-   */
-  FT_EXPORT( void )
-  FT_OpenType_Free( FT_Face   face,
-                    FT_Bytes  table );
-
-
-  /* */
-
-
-FT_END_HEADER
-
-#endif /* FTOTVAL_H_ */
-
-
-/* END */