iobroker.zendure-solarflow 1.15.2 → 1.15.3

package/README.md

@@ -44,17 +44,22 @@ You can still do firmware updates with the official Zendure app via bluetooth an
 
 ## Notes
 
-1. Please deactivate/uncheck all modes in the Zendure App, otherwise it is not possible to set the output limit!
+1. Please deactivate/uncheck all modes in the Zendure App, otherwise it is not possible to set the output limit! You can also set "autoModel" to 0 via control folder in adapter/objects.
 
    ![Solarflow Settings Window](https://raw.github.com/nograx/ioBroker.zendure-solarflow/master/Screenshots/ZendureSolarflowSettings.png)
 
-2. You will be logged out of the official iOS or Android App after logging in with the ioBroker adapter. This is a normal behavior. As a workaround you can create an second Zendure account with another e-mail and grant access to your Solarflow HUB to this account. Then use the second account for ioBroker / the Zendure Solarflow adapter.
+2. You will be logged out of the official iOS or Android App after logging in with the ioBroker adapter. This is a normal behavior. As a workaround you can create an second Zendure account with another e-mail and grant access to your Solarflow HUB to this account. Then use the second account for ioBroker / the Zendure Solarflow adapter. This is not working für new devices like SF 2400 AC or SF 800 (Pro).
 
 ## Credits
 
 Credits goes to https://github.com/reinhard-brandstaedter/solarflow which helped a lot with the knowledge about the MQTT server from Zendure! Thanks!
 
 ## Changelog
+### 1.15.3 (2025-07-17)
+
+- Match case sensitive product key for SF 2400 AC and SF 800 in settings if local mode is used
+- Add sensor and control of "SmartMode"
+
 ### 1.15.2 (2025-07-14)
 
 - Fix missing SF 800 & 2400 AC in local mode settings
@@ -69,122 +74,6 @@ Credits goes to https://github.com/reinhard-brandstaedter/solarflow which helped
 - Add 'packPower' state, which shows combined power from (packInputPower and outputPackPower). Discharging will be shown with a negative value.
 - Add 'hyperTmp' to Solarflow 800 devices in hope this will show the temperature of the Solarflow 800 (can not test it due to lack of test device).
 
-### 1.14.4 (2025-06-26)
-
-- Add Product Key for Solarflow 800
-- Update dependencys
-
-### 1.14.3 (2025-06-09)
-
-- Fix input and output limit for Solarflow 2400 AC
-
-### 1.14.2 (2025-06-07)
-
-- Fix control states not writable.
-
-### 1.14.1 (2025-06-07)
-
-- IMPORTANT: This version will use a new way to check which states should be created for the device, so maybe something is broken on state creation!
-- Add support for AC2400, Solarflow 800 and Solarflow 800 Pro. All devices are untested as Zendure won't allow to share data to other users on these new devices AND I don't own any of the devices!
-- Removed the "standby usage" on batteries, as it confused some people.
-
-### 1.13.2 (2025-05-07)
-
-- Fix AC Mode showing unknown parameter on ACE 1500
-
-### 1.13.1 (2025-05-05)
-
-- TEST: Set Smart CT Mode and Smart Matching Mode correctly - Feedback needed!
-- Removed efficiency from calculation, as it seems Zendure already included it in charge and discharge values
-
-### 1.13.0 (2025-04-30)
-
-- Add possibility to deactivate automatic restart of adapter in adapter settings (recommended only on local mode!)
-- Fixed missing control state "hubState"
-
-### 1.12.7 (2025-03-24)
-
-- Add productKey "gDa3tb" for Hyper 2000
-
-### 1.12.6 (2025-03-21)
-
-- Fix onMessage Debug message
-
-### 1.12.5 (2025-03-21)
-
-- Add Debug messages on log level debug
-- Add schedule for adapter refresh on local mode
-- Fix Change of Discharge limit to 0
-
-### 1.12.4 (2025-03-19)
-
-- Fix calculation of SOC if "local" mode is used
-
-### 1.12.3 (2025-03-19)
-
-- Add 2 more devices if "local" mode is used
-- Fix mqtt subscription of 2. device in "local" mode
-
-### 1.12.2 (2025-03-18)
-
-- Fix reset of calculation values on "local" mode
-
-### 1.12.1 (2025-03-17)
-
-- Fix IOT subscription
-
-### 1.12.0 (2025-03-17)
-
-- Added possibility to use "local" mode. You have to either route dns request to your own MQTT server or use a tool to modify the Zendure device
-- Some improvements on value calculation
-- Some improvements on AIO 2400 device
-
-### 1.11.0 (2025-02-11)
-
-- Drop Standby usage to 7W and 14W if HUB connected with ACE as it is more accurate
-- Added heatState and autoModel (system operation mode) state
-- Added possibility to set the operation mode (autoModel)
-- Fix gridPower state
-
-### 1.10.7 (2025-01-21)
-
-- Fix reset calculation values of ACE if connected to HUB
-
-### 1.10.6 (2025-01-16)
-
-- Fix start of calculation if HUB is connected with Ace
-
-### 1.10.4 (2025-01-14)
-
-- Fix "Grid Input Power" state if connected with Ace
-
-### 1.10.1 (2025-01-06)
-
-- Fix input limit when hub is bundled with ace
-- Fix calculation when low voltage block is activated
-
-### 1.10.0 (2024-12-02)
-
-- Add setting to perform a full charge if SOC from Zendure is greater than 50% when on low voltage
-- Bugfixes
-
-### 1.9.3 (2024-11-22)
-
-- Fix for Low Voltage Block not deactivated
-
-### 1.9.2 (2024-11-21)
-
-- Fix some state definitions
-
-### 1.9.1 (2024-11-21)
-
-- Improvement for 'Low Voltage Block'.
-- Changed the state "hubState" a an option value.
-
-### 1.9.0 (2024-11-20)
-
-- New option to force Solarflow device to go offline when "Low Voltage Block"-option is used.
-
 ## License
 
 MIT License