iobroker.yamaha 2.7.1 → 2.7.2

package/README.md

@@ -108,6 +108,12 @@ On the very first contact the adapter asks the receiver which functions it suppo
     Placeholder for the next version (at the beginning of the line):
     ### **WORK IN PROGRESS**
 -->
+### 2.7.2 (2026-09-09)
+
+- (krobipd) Fixed: The volume readout now follows the scale the receiver is actually showing, so a receiver set to numbers no longer reports them as decibels.
+- (krobipd) New: Inputs now appear under the names the receiver carries for them, so a socket named “Apple TV” reads that way instead of HDMI1.
+- (krobipd) Changed: After this update every receiver is asked about its abilities once more, so the first start takes a little longer than usual.
+
 ### 2.7.1 (2026-09-09)
 
 - (krobipd) Improved: The first connection asks a receiver only what its generation can answer, so zones, trigger sockets and per-input settings follow the device, not a catalogue.
@@ -132,16 +138,6 @@ On the very first contact the adapter asks the receiver which functions it suppo
 
 - (krobipd) Changed: installing straight from GitHub is no longer offered — the adapter is built before publishing, so it is installed from the ioBroker repository instead
 
-### 2.5.0 (2026-09-07)
-
-- (krobipd) Fixed: switching off a datapoint group now clears it in every zone — turning off "Sound" used to leave the zone 2/3/4 sound datapoints standing, and "Playback" left 304 of them
-- (krobipd) Fixed: folders explain themselves on all three protocols now — on MusicCast and older XML receivers the explanation was missing, so a speaker or soundbar got almost none
-- (krobipd) Improved: numeric datapoints carry the limits the device itself declares, so a slider offers exactly the range the receiver accepts instead of an open number field
-- (krobipd) New: 61 setup datapoints of the 2010 receiver generation — speaker configuration, HDMI and lip-sync settings, trigger assignment, subwoofer trim, YPAO volume and the RDS clock
-- (krobipd) New: the device-wide MusicCast settings are readable and writable — automatic standby, display brightness and the two HDMI outputs, created only where the device really offers them
-- (krobipd) Fixed: bass, treble and subwoofer trim showed doubled values on MusicCast receivers — that scale counts in half decibels and was labelled as decibels
-- (krobipd) Fixed: a receiver that was in standby when the adapter started could end up with an empty media menu until the next restart
-
 [Older changelogs can be found there](CHANGELOG_OLD.md)
 
 ## History

package/admin/i18n/de.json

@@ -256,6 +256,7 @@
   "volume": "Lautstärke",
   "descVolume": "Wie laut die Zone spielt: die beiden Text-Protokolle melden Dezibel, MusicCast seine eigene Schrittzahl — die Einheit sagt, welche.",
   "volumeDB": "Lautstärke (dB)",
+  "volumeDisplay": "Lautstärke (Anzeige)",
   "volumeDisplayMode": "Lautstärke-Anzeigeart",
   "volumeInterlock": "Lautstärke-Kopplung",
   "yncaControlPort": "YNCA-Steuerport",
@@ -384,6 +385,7 @@
   "descElapsedTime": "In Sekunden, damit man damit rechnen kann; die lesbare Form steht daneben.",
   "descTotalTime": "In Sekunden, damit man damit rechnen kann; die lesbare Form steht daneben.",
   "descVolumeDB": "Dieselbe Lautstärke, wie sie das Display des Receivers zeigt, in Dezibel.",
+  "descVolumeDisplay": "Dieselbe Lautstärke, wie sie das Display des Receivers zeigt, in der gerade eingestellten Skala.",
   "descVolumeDisplayMode": "Ob der Receiver die Lautstärke in Dezibel oder als schlichte Zahl anzeigt.",
   "descAudioSelect": "Von welcher Buchse der aktuelle Eingang seinen Ton nimmt: automatisch, HDMI, koaxial/optisch oder analog.",
   "descLinkControl": "Wägt Stabilität gegen Verzögerung ab, wenn an verbundene Geräte gestreamt wird.",

package/admin/i18n/en.json

@@ -256,6 +256,7 @@
   "volume": "Volume",
   "descVolume": "How loud the zone plays: the two text protocols report decibels, MusicCast its own step count — the unit tells you which.",
   "volumeDB": "Volume (dB)",
+  "volumeDisplay": "Volume (display)",
   "volumeDisplayMode": "Volume display mode",
   "volumeInterlock": "Volume interlock",
   "yncaControlPort": "YNCA control port",
@@ -384,6 +385,7 @@
   "descElapsedTime": "In seconds, so it can be calculated with; a readable form sits next to it.",
   "descTotalTime": "In seconds, so it can be calculated with; a readable form sits next to it.",
   "descVolumeDB": "The same volume as the receiver's own display shows it, in decibels.",
+  "descVolumeDisplay": "The same volume the receiver's display shows, in whichever scale it is set to.",
   "descVolumeDisplayMode": "Whether the receiver shows volume in decibels or as a plain number.",
   "descAudioSelect": "Which terminal's sound the current input uses: automatic, HDMI, coaxial/optical or analogue.",
   "descLinkControl": "Trades stability against delay when streaming to linked devices.",

package/admin/i18n/es.json

@@ -256,6 +256,7 @@
   "volume": "Volumen",
   "descVolume": "Lo alto que suena la zona: los dos protocolos de texto dan decibelios, MusicCast sus propios pasos — la unidad indica cuál.",
   "volumeDB": "Volumen (dB)",
+  "volumeDisplay": "Volumen (pantalla)",
   "volumeDisplayMode": "Modo de visualización del volumen",
   "volumeInterlock": "Bloqueo de volumen",
   "yncaControlPort": "Puerto de control YNCA",
@@ -384,6 +385,7 @@
   "descElapsedTime": "En segundos, para poder calcular; la forma legible está al lado.",
   "descTotalTime": "En segundos, para poder calcular; la forma legible está al lado.",
   "descVolumeDB": "El mismo volumen que muestra la pantalla del receptor, en decibelios.",
+  "descVolumeDisplay": "El mismo volumen que muestra la pantalla del receptor, en la escala seleccionada actualmente.",
   "descVolumeDisplayMode": "Si el receptor muestra el volumen en decibelios o como número.",
   "descAudioSelect": "De qué terminal toma el sonido la entrada actual: automático, HDMI, coaxial/óptico o analógico.",
   "descLinkControl": "Equilibra estabilidad y retardo al transmitir a aparatos enlazados.",

package/admin/i18n/fr.json

@@ -256,6 +256,7 @@
   "volume": "Volume",
   "descVolume": "Le niveau sonore de la zone : les deux protocoles texte donnent des décibels, MusicCast ses propres pas — l'unité indique lequel.",
   "volumeDB": "Volume (dB)",
+  "volumeDisplay": "Volume (afficheur)",
   "volumeDisplayMode": "Mode d'affichage du volume",
   "volumeInterlock": "Verrouillage du volume",
   "yncaControlPort": "Port de commande YNCA",
@@ -384,6 +385,7 @@
   "descElapsedTime": "En secondes, pour pouvoir calculer ; la forme lisible est à côté.",
   "descTotalTime": "En secondes, pour pouvoir calculer ; la forme lisible est à côté.",
   "descVolumeDB": "Le même volume que l'afficheur de l'ampli, en décibels.",
+  "descVolumeDisplay": "Le même volume que l'afficheur de l'ampli, dans l'échelle actuellement réglée.",
   "descVolumeDisplayMode": "Si l'ampli affiche le volume en décibels ou en nombre simple.",
   "descAudioSelect": "De quelle prise l'entrée actuelle tire son son : automatique, HDMI, coaxiale/optique ou analogique.",
   "descLinkControl": "Arbitre entre stabilité et latence lors de la diffusion vers les appareils liés.",

package/admin/i18n/it.json

@@ -256,6 +256,7 @@
   "volume": "Volume",
   "descVolume": "Quanto forte suona la zona: i due protocolli testuali danno decibel, MusicCast i propri passi — l'unità dice quale.",
   "volumeDB": "Volume (dB)",
+  "volumeDisplay": "Volume (display)",
   "volumeDisplayMode": "Modalità di visualizzazione del volume",
   "volumeInterlock": "Blocco volume",
   "yncaControlPort": "Porta di controllo YNCA",
@@ -384,6 +385,7 @@
   "descElapsedTime": "In secondi, così è calcolabile; la forma leggibile è accanto.",
   "descTotalTime": "In secondi, così è calcolabile; la forma leggibile è accanto.",
   "descVolumeDB": "Lo stesso volume mostrato dal display del ricevitore, in decibel.",
+  "descVolumeDisplay": "Lo stesso volume mostrato dal display del ricevitore, nella scala attualmente impostata.",
   "descVolumeDisplayMode": "Se il ricevitore mostra il volume in decibel o come numero.",
   "descAudioSelect": "Da quale terminale l'ingresso corrente prende l'audio: automatico, HDMI, coassiale/ottico o analogico.",
   "descLinkControl": "Bilancia stabilità e ritardo nello streaming verso apparecchi collegati.",

package/admin/i18n/nl.json

@@ -256,6 +256,7 @@
   "volume": "Volume",
   "descVolume": "Hoe hard de zone speelt: de twee tekstprotocollen geven decibel, MusicCast zijn eigen stappen — de eenheid zegt welke.",
   "volumeDB": "Volume (dB)",
+  "volumeDisplay": "Volume (display)",
   "volumeDisplayMode": "Weergavemodus volume",
   "volumeInterlock": "Volumekoppeling",
   "yncaControlPort": "YNCA-besturingspoort",
@@ -384,6 +385,7 @@
   "descElapsedTime": "In seconden, zodat ermee gerekend kan worden; de leesbare vorm staat ernaast.",
   "descTotalTime": "In seconden, zodat ermee gerekend kan worden; de leesbare vorm staat ernaast.",
   "descVolumeDB": "Hetzelfde volume als op het display van de receiver, in decibel.",
+  "descVolumeDisplay": "Hetzelfde volume als op het display van de receiver, in de nu ingestelde schaal.",
   "descVolumeDisplayMode": "Of de receiver het volume in decibel of als getal toont.",
   "descAudioSelect": "Van welke aansluiting de huidige ingang zijn geluid neemt: automatisch, HDMI, coaxiaal/optisch of analoog.",
   "descLinkControl": "Weegt stabiliteit tegen vertraging af bij streamen naar gekoppelde apparaten.",

package/admin/i18n/pl.json

@@ -256,6 +256,7 @@
   "volume": "Głośność",
   "descVolume": "Jak głośno gra strefa: dwa protokoły tekstowe podają decybele, MusicCast własne kroki — jednostka mówi, który z nich.",
   "volumeDB": "Głośność (dB)",
+  "volumeDisplay": "Głośność (wyświetlacz)",
   "volumeDisplayMode": "Tryb wyświetlania głośności",
   "volumeInterlock": "Sprzężenie głośności",
   "yncaControlPort": "Port sterowania YNCA",
@@ -384,6 +385,7 @@
   "descElapsedTime": "W sekundach, by dało się liczyć; czytelna forma obok.",
   "descTotalTime": "W sekundach, by dało się liczyć; czytelna forma obok.",
   "descVolumeDB": "Ta sama głośność co na wyświetlaczu amplitunera, w decybelach.",
+  "descVolumeDisplay": "Ta sama głośność co na wyświetlaczu amplitunera, w aktualnie ustawionej skali.",
   "descVolumeDisplayMode": "Czy amplituner pokazuje głośność w decybelach, czy jako liczbę.",
   "descAudioSelect": "Z którego gniazda bieżące wejście pobiera dźwięk: automatycznie, HDMI, koncentryczne/optyczne lub analogowe.",
   "descLinkControl": "Równoważy stabilność i opóźnienie przy przesyłaniu do połączonych urządzeń.",

package/admin/i18n/pt.json

@@ -256,6 +256,7 @@
   "volume": "Volume",
   "descVolume": "Quão alto a zona toca: os dois protocolos de texto dão decibéis, o MusicCast os seus próprios passos — a unidade indica qual.",
   "volumeDB": "Volume (dB)",
+  "volumeDisplay": "Volume (visor)",
   "volumeDisplayMode": "Modo de exibição do volume",
   "volumeInterlock": "Bloqueio de volume",
   "yncaControlPort": "Porta de controlo YNCA",
@@ -384,6 +385,7 @@
   "descElapsedTime": "Em segundos, para poder calcular; a forma legível está ao lado.",
   "descTotalTime": "Em segundos, para poder calcular; a forma legível está ao lado.",
   "descVolumeDB": "O mesmo volume que o visor do recetor mostra, em decibéis.",
+  "descVolumeDisplay": "O mesmo volume que o visor do recetor mostra, na escala atualmente selecionada.",
   "descVolumeDisplayMode": "Se o recetor mostra o volume em decibéis ou como número simples.",
   "descAudioSelect": "De que terminal o som da entrada atual vem: automático, HDMI, coaxial/ótico ou analógico.",
   "descLinkControl": "Equilibra estabilidade e atraso ao transmitir para aparelhos ligados.",

package/admin/i18n/ru.json

@@ -256,6 +256,7 @@
   "volume": "Громкость",
   "descVolume": "Насколько громко играет зона: два текстовых протокола дают децибелы, MusicCast — свои шаги; единица измерения показывает, что именно.",
   "volumeDB": "Громкость (дБ)",
+  "volumeDisplay": "Громкость (дисплей)",
   "volumeDisplayMode": "Режим отображения громкости",
   "volumeInterlock": "Связка громкости",
   "yncaControlPort": "Порт управления YNCA",
@@ -384,6 +385,7 @@
   "descElapsedTime": "В секундах, чтобы с этим можно было считать; читаемая форма рядом.",
   "descTotalTime": "В секундах, чтобы с этим можно было считать; читаемая форма рядом.",
   "descVolumeDB": "Та же громкость, что показывает дисплей ресивера, в децибелах.",
+  "descVolumeDisplay": "Та же громкость, что показывает дисплей ресивера, в текущей выбранной шкале.",
   "descVolumeDisplayMode": "Показывает ли ресивер громкость в децибелах или простым числом.",
   "descAudioSelect": "Звук какого разъёма использует текущий вход: автоматически, HDMI, коаксиальный/оптический или аналоговый.",
   "descLinkControl": "Баланс стабильности и задержки при передаче на связанные устройства.",

package/admin/i18n/uk.json

@@ -256,6 +256,7 @@
   "volume": "Гучність",
   "descVolume": "Наскільки гучно грає зона: два текстові протоколи дають децибели, MusicCast — власні кроки; одиниця показує, що саме.",
   "volumeDB": "Гучність (дБ)",
+  "volumeDisplay": "Гучність (дисплей)",
   "volumeDisplayMode": "Режим показу гучності",
   "volumeInterlock": "Зв'язка гучності",
   "yncaControlPort": "Порт керування YNCA",
@@ -384,6 +385,7 @@
   "descElapsedTime": "У секундах, щоб можна було рахувати; зручна форма поруч.",
   "descTotalTime": "У секундах, щоб можна було рахувати; зручна форма поруч.",
   "descVolumeDB": "Та сама гучність, що на дисплеї ресивера, у децибелах.",
+  "descVolumeDisplay": "Та сама гучність, що на дисплеї ресивера, у поточно вибраній шкалі.",
   "descVolumeDisplayMode": "Чи показує ресивер гучність у децибелах, чи простим числом.",
   "descAudioSelect": "Звук якого роз'єму використовує поточний вхід: автоматично, HDMI, коаксіальний/оптичний чи аналоговий.",
   "descLinkControl": "Баланс стабільності та затримки при передачі на пов'язані пристрої.",

package/admin/i18n/zh-cn.json

@@ -256,6 +256,7 @@
   "volume": "音量",
   "descVolume": "该区域的音量：两种文本协议给出分贝，MusicCast 给出自身的步进值，单位标明是哪一种。",
   "volumeDB": "音量 (dB)",
+  "volumeDisplay": "音量（显示）",
   "volumeDisplayMode": "音量显示方式",
   "volumeInterlock": "音量联动",
   "yncaControlPort": "YNCA 控制端口",
@@ -384,6 +385,7 @@
   "descElapsedTime": "以秒为单位便于计算；易读形式在旁边。",
   "descTotalTime": "以秒为单位便于计算；易读形式在旁边。",
   "descVolumeDB": "与功放显示屏一致的音量，单位分贝。",
+  "descVolumeDisplay": "与功放显示屏一致的音量，采用当前设置的刻度。",
   "descVolumeDisplayMode": "功放以分贝还是普通数字显示音量。",
   "descAudioSelect": "当前输入使用哪个端子的声音：自动、HDMI、同轴/光纤或模拟。",
   "descLinkControl": "向联动设备串流时在稳定性与延迟之间取舍。",

package/build/lib/lifecycle/discovery-schema.js

@@ -21,7 +21,7 @@ __export(discovery_schema_exports, {
   DISCOVERY_SCHEMA: () => DISCOVERY_SCHEMA
 });
 module.exports = __toCommonJS(discovery_schema_exports);
-const DISCOVERY_SCHEMA = 1;
+const DISCOVERY_SCHEMA = 2;
 // Annotate the CommonJS export names for ESM import in node:
 0 && (module.exports = {
   DISCOVERY_SCHEMA

package/build/lib/lifecycle/discovery-schema.js.map

@@ -1,7 +1,7 @@
 {
   "version": 3,
   "sources": ["../../../src/lib/lifecycle/discovery-schema.ts"],
-  "sourcesContent": ["/**\n * The version of the adapter's DISCOVERY LOGIC \u2014 how it turns device answers into objects,\n * dropdowns and bounds. Persisted with every per-device memory (`native.probeCache`,\n * `native.yncaAvail`); a memory learned under another schema is discarded on load, so the\n * device is re-learned on its next connect with the current logic (cold path, \u2264 32 s over\n * YNCA, objects correct in the same start). A memory without the field is schema 0 \u2014 every\n * installation before 2.6.0 \u2014 and is re-learned once by the first release that carries this.\n *\n * Bump it when a release changes what discovery PRODUCES (a new declaration source, a changed\n * candidate list, a new derivation rule); leave it alone when only values, logging or the wire\n * paths change. `discovery-schema.test.ts` holds the object inventory's shape against it in both\n * directions \u2014 output changed on a released schema without a bump fails, a bump without a change\n * fails \u2014 with the stamp `test/discovery-schema.json`. (2.6.0: the adapter-VERSION trigger was\n * rejected in the advisor round \u2014 every patch release would re-sweep every device for a result\n * the schema bump already guarantees when discovery really changed. Since 2.7.0 a transport can\n * ask for a re-coordination within the session, so a late object does materialise \u2014 but that is\n * ADDITIVE; a changed discovery LOGIC still needs the cold re-learn this constant triggers.)\n */\nexport const DISCOVERY_SCHEMA = 1;\n"],
+  "sourcesContent": ["/**\n * The version of the adapter's DISCOVERY LOGIC \u2014 how it turns device answers into objects,\n * dropdowns and bounds. Persisted with every per-device memory (`native.probeCache`,\n * `native.yncaAvail`); a memory learned under another schema is discarded on load, so the\n * device is re-learned on its next connect with the current logic (cold path, \u2264 32 s over\n * YNCA, objects correct in the same start). A memory without the field is schema 0 \u2014 every\n * installation before 2.6.0 \u2014 and is re-learned once by the first release that carries this.\n *\n * Bump it when a release changes what discovery PRODUCES (a new declaration source, a changed\n * candidate list, a new derivation rule); leave it alone when only values, logging or the wire\n * paths change. `discovery-schema.test.ts` holds the object inventory's shape against it in both\n * directions \u2014 output changed on a released schema without a bump fails, a bump without a change\n * fails \u2014 with the stamp `test/discovery-schema.json`. (2.6.0: the adapter-VERSION trigger was\n * rejected in the advisor round \u2014 every patch release would re-sweep every device for a result\n * the schema bump already guarantees when discovery really changed. Since 2.7.0 a transport can\n * ask for a re-coordination within the session, so a late object does materialise \u2014 but that is\n * ADDITIVE; a changed discovery LOGIC still needs the cold re-learn this constant triggers.)\n */\nexport const DISCOVERY_SCHEMA = 2;\n"],
   "mappings": ";;;;;;;;;;;;;;;;;;AAAA;AAAA;AAAA;AAAA;AAAA;AAkBO,MAAM,mBAAmB;",
   "names": []
 }

package/build/lib/xml/device-controller.js

@@ -78,6 +78,11 @@ class XmlDeviceController {
   createdChannels = /* @__PURE__ */ new Set();
   /** The per-zone `Input_Sel_Item` lists and the device description, kept for a mid-session build. */
   inputsByZone = /* @__PURE__ */ new Map();
+  /**
+   * Per zone: the label the device carries for each input value (`<Title>`, e.g. HDMI1 → "Apple
+   * TV"). The dropdown shows these, the value written to the device stays the protocol's own.
+   */
+  inputLabelsByZone = /* @__PURE__ */ new Map();
   deviceDescriptor = { programs: [], sleep: [], adaptiveDrc: [] };
   /**
    * The spelling this device answers its amplifier block with (see XmlDialect) — learned from
@@ -138,6 +143,7 @@ class XmlDeviceController {
     this.zones = answered.map((probe) => probe.zone);
     const model = config.model;
     const inputsByZone = /* @__PURE__ */ new Map();
+    const inputLabels = /* @__PURE__ */ new Map();
     for (const zone of this.zones) {
       const body = await this.probeXml(
         `xmlInputs:${zone.key}`,
@@ -145,6 +151,7 @@ class XmlDeviceController {
         "<Input><Input_Sel_Item>GetParam</Input_Sel_Item></Input>"
       );
       inputsByZone.set(zone.key, (0, import_protocol.parseInputList)(body));
+      inputLabels.set(zone.key, (0, import_protocol.parseInputLabels)(body));
     }
     const descriptor = await this.probeDescriptor();
     this.zoneCommands = {
@@ -163,6 +170,7 @@ class XmlDeviceController {
       this.zoneFields.set(zone.key, fields);
     }
     this.inputsByZone = inputsByZone;
+    this.inputLabelsByZone = inputLabels;
     this.deviceDescriptor = descriptor;
     const createdChannels = this.createdChannels;
     for (const zone of this.zones) {
@@ -725,7 +733,11 @@ class XmlDeviceController {
       const declaredList = this.declaredListFor(entry.state, zone.key, inputsByZone, descriptor);
       const declared = declaredList !== void 0 && declaredList.length > 0;
       if (declared) {
-        common.states = Object.fromEntries(declaredList.map((value) => [value, value]));
+        const labels = entry.state === "input" ? this.inputLabelsByZone.get(zone.key) : void 0;
+        common.states = Object.fromEntries(declaredList.map((value) => {
+          var _a2;
+          return [value, (_a2 = labels == null ? void 0 : labels[value]) != null ? _a2 : value];
+        }));
       }
       if (entry.state === "sound.dialogueLevel" && descriptor.dialogueLevel) {
         common.min = descriptor.dialogueLevel.min;