iobroker.tidy 0.2.3 → 0.3.0

package/admin/i18n/it.json

@@ -3,24 +3,18 @@
 	"Check alias targets": "Controlla le destinazioni alias",
 	"Comment (optional)": "Commento (facoltativo)",
 	"Configure which paths to scan for unused datapoints. Use the object picker or type a path manually. Each path will get its own result state with a JSON table.": "Configura quali percorsi scansionare per i punti dati inutilizzati. Utilizzare il selettore oggetti o digitare manualmente un percorso. Ogni percorso otterrà il proprio stato di risultato con una tabella JSON.",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nPick a single state to exclude one datapoint, or pick a folder/channel to exclude an entire subtree.\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "I punti dati elencati nella scheda Eccezioni vengono omessi da tutti i risultati e le statistiche della scansione. Usalo per valori di configurazione che cambiano raramente ma che non dovrebbero apparire come obsoleti o obsoleti.\n\nScegli un singolo stato per escludere un punto dati oppure scegli una cartella/canale per escludere un intero sottoalbero.\n\nOgni canale di scansione fornisce un conteggio delle eccezioni che mostra quanti punti dati sono stati esclusi durante l'ultima scansione (0 se nessuno).",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "I punti dati elencati nella scheda Eccezioni vengono omessi da tutti i risultati e le statistiche della scansione. Usalo per valori di configurazione che cambiano raramente ma che non dovrebbero apparire come obsoleti o obsoleti.\n\nUtilizza il selettore per selezionare singoli punti dati (stati). Per escludere un'intera cartella o un sottoalbero, digitare il percorso direttamente nel campo (ad esempio 0_userdata.0.config).\n\nOgni canale di scansione fornisce un conteggio delle eccezioni che mostra quanti punti dati sono stati esclusi durante l'ultima scansione (0 se nessuno).",
+	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "I punti dati elencati nella scheda Eccezioni vengono omessi da tutti i risultati e le statistiche della scansione. Usalo per valori di configurazione che cambiano raramente ma che non dovrebbero apparire come obsoleti o obsoleti.\n\nUtilizza il selettore per selezionare singoli punti dati (stati). Per escludere un'intera cartella o un sottoalbero, digitare il percorso direttamente nel campo (ad esempio 0_userdata.0.config). Sono supportati i caratteri jolly: * corrisponde a qualsiasi suffisso, ? corrisponde a un singolo carattere (ad esempio 0_userdata.0.rollo.trigger*).\n\nOgni canale di scansione fornisce un conteggio delle eccezioni che mostra quanti punti dati sono stati esclusi durante l'ultima scansione (0 se nessuno).",
 	"Datapoints not updated for this many days are marked as 'dead'": "I punti dati non aggiornati per questo numero di giorni sono contrassegnati come \"morti\"",
 	"Datapoints not updated for this many days are marked as 'stale'": "I punti dati non aggiornati per questo numero di giorni sono contrassegnati come \"obsoleti\"",
 	"Days until 'dead' (critical)": "Giorni fino alla \"morte\" (critica)",
 	"Days until 'stale' (warning)": "Giorni fino a \"stale\" (avviso)",
-	"Description": "Descrizione",
 	"Detection Thresholds": "Soglie di rilevamento",
 	"Each scan result contains a JSON array with the following fields per datapoint:": "Ogni risultato della scansione contiene un array JSON con i seguenti 10 campi per punto dati:",
 	"Enable automatic scans": "Abilita le scansioni automatiche",
 	"Enabled": "Abilitato",
-	"Enter scan paths on the Scan Paths tab or copy IDs from the Objects tab.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Immettere i percorsi di scansione nella scheda Percorsi di scansione o copiare gli ID dalla scheda Oggetti.\n\nPer scansionare tutte le istanze di un adattatore, rimuovere il numero di istanza dal percorso (ad esempio alias.0 → alias). Corrisponde a alias.0, alias.1 e così via.",
-	"Enter the scan path (e.g. 0_userdata.0, alias, javascript.0). Copy from the Objects tab if needed. Remove the instance number (alias.0 → alias) to scan all instances.": "Inserisci il percorso di scansione (ad esempio 0_userdata.0, alias, javascript.0). Copia dalla scheda Oggetti, se necessario. Rimuovere il numero dell'istanza (alias.0 → alias) per scansionare tutte le istanze.",
 	"Exceptions": "Eccezioni",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored (e.g. configuration values that rarely change). Select a single datapoint or a folder to exclude everything beneath it.": "Escludere i punti dati dai risultati della scansione che sono intenzionalmente statici o che dovrebbero essere ignorati (ad esempio valori di configurazione che cambiano raramente). Seleziona un singolo punto dati o una cartella per escludere tutto ciò che è al di sotto di esso.",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config).": "Escludere i punti dati dai risultati della scansione che sono intenzionalmente statici o che dovrebbero essere ignorati. Utilizza il selettore per selezionare singoli punti dati. Per escludere un'intera cartella, digitare manualmente il percorso (es. 0_userdata.0.config).",
+	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).": "Escludere i punti dati dai risultati della scansione che sono intenzionalmente statici o che dovrebbero essere ignorati. Utilizza il selettore per selezionare singoli punti dati. Per escludere un'intera cartella, digitare manualmente il percorso (es. 0_userdata.0.config). Sono supportati i caratteri jolly: * corrisponde a qualsiasi suffisso, ? corrisponde a un singolo carattere (ad esempio 0_userdata.0.rollo.trigger*).",
 	"Excluded datapoints": "Punti dati esclusi",
-	"Field": "Chiave",
 	"For German tables: Use status_de and issue_de columns\nFor English tables: Use status and issue columns\n\nFilter by 'issue != null' to show only problematic datapoints.": "Per le tabelle tedesche: utilizzare le colonne status_de e issue_de.\nPer le tabelle in inglese: utilizzare le colonne di stato e di emissione\n\nFiltra per \"problema! = null\" per mostrare solo i punti dati problematici.",
 	"For alias.* paths: Check if target datapoints exist (ghost detection)": "Per percorsi alias.*: controlla se esistono punti dati di destinazione (rilevamento fantasma)",
 	"General Settings": "Impostazioni generali",
@@ -28,37 +22,23 @@
 	"How often the automatic scan should run (minimum 1 hour)": "La frequenza con cui deve essere eseguita la scansione automatica (minimo 1 ora)",
 	"If enabled, the adapter will scan the entire object tree and store the result in a separate 'complete' result channel.": "Se abilitato, l'adattatore eseguirà la scansione dell'intero albero degli oggetti e memorizzerà il risultato in un canale di risultati \"completo\" separato.",
 	"JSON Table Field Description": "Descrizione campo tabella JSON",
-	"Name": "Nome",
-	"Name (for result state)": "Nome (per lo stato del risultato)",
 	"Name (for result state, optional)": "Nome (per lo stato del risultato, facoltativo)",
 	"Object": "Oggetto",
 	"Optional note, e.g. alarm clock radio station": "Nota facoltativa, ad es. stazione radio sveglia",
 	"Optional. If empty, the path will be used as name.": "Opzionale. Se vuoto, il percorso verrà utilizzato come nome.",
 	"Path Configuration": "Configurazione del percorso",
 	"Paths to scan": "Percorsi da scansionare",
-	"Pick a folder in the object tree to exclude an entire subtree, or type a single state ID manually (e.g. 0_userdata.0.radio.station).": "Scegli una cartella nell'albero degli oggetti per escludere un intero sottoalbero o digita manualmente un singolo ID di stato (ad esempio 0_userdata.0.radio.station).",
-	"Pick a folder in the object tree, or type a path manually (e.g. 0_userdata.0). Remove the instance number (alias.0 → alias) to scan all instances.": "Scegli una cartella nell'albero degli oggetti o digita manualmente un percorso (ad esempio 0_userdata.0). Rimuovere il numero dell'istanza (alias.0 → alias) per scansionare tutte le istanze.",
-	"Pick a folder or namespace (e.g. alias, 0_userdata.0, alias.0.Heizungen). Individual datapoints are not shown. The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Scegli una cartella o uno spazio dei nomi (ad esempio alias, 0_userdata.0, alias.0.Heizungen). I singoli punti dati non vengono visualizzati. Il percorso rimane modificabile: rimuovi il numero dell'istanza (alias.0 → alias) per scansionare tutte le istanze.",
-	"Pick a folder/channel to exclude an entire subtree. To exclude a single state, type its ID directly into the field (e.g. 0_userdata.0.radio.station).": "Scegli una cartella/canale per escludere un intero sottoalbero. Per escludere un singolo stato digitare il suo ID direttamente nel campo (es. 0_userdata.0.radio.station).",
-	"Pick a path from the object tree or type manually. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Scegli un percorso dall'albero degli oggetti o digitalo manualmente. Rimuovere il numero di istanza (ad esempio alias.0 → alias) per scansionare tutte le istanze di un adattatore.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — append a subfolder or remove the instance number (alias.0 → alias) after picking.": "Scegli un'istanza dell'adattatore (ad esempio 0_userdata.0, alias.0). Il percorso rimane modificabile: aggiungi una sottocartella o rimuovi il numero di istanza (alias.0 → alias) dopo la selezione.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Scegli un'istanza dell'adattatore (ad esempio 0_userdata.0, alias.0). Il percorso rimane modificabile: rimuovi il numero dell'istanza (alias.0 → alias) per scansionare tutte le istanze.",
-	"Pick an adapter instance or subfolder (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Scegli un'istanza o una sottocartella dell'adattatore (ad esempio 0_userdata.0, alias.0). Il percorso rimane modificabile: rimuovi il numero dell'istanza (alias.0 → alias) per scansionare tutte le istanze.",
-	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config).": "Scegli un singolo punto dati per escluderlo. Per escludere un'intera cartella, digitare direttamente il percorso della cartella (es. 0_userdata.0.config).",
-	"Purpose": "Scopo",
+	"Pick a namespace (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Scegli un'istanza o una sottocartella dell'adattatore (ad esempio 0_userdata.0, alias.0). Il percorso rimane modificabile: rimuovi il numero dell'istanza (alias.0 → alias) per scansionare tutte le istanze.",
+	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config). Use * or ? for wildcard patterns (e.g. 0_userdata.0.rollo.trigger*).": "Scegli un singolo punto dati per escluderlo. Per escludere un'intera cartella, digitare direttamente il percorso della cartella (es. 0_userdata.0.config). Utilizzare * o ? per i modelli di caratteri jolly (ad esempio 0_userdata.0.rollo.trigger*).",
 	"Scan Paths": "Percorsi di scansione",
 	"Scan all objects (complete)": "Scansiona tutti gli oggetti (completo)",
 	"Scan interval (hours)": "Intervallo di scansione (ore)",
 	"Scan path": "Percorso di scansione",
-	"Select a datapoint or folder to exclude. Folders exclude all states beneath them.": "Seleziona un punto dati o una cartella da escludere. Le cartelle escludono tutti gli stati sottostanti.",
-	"Tip: The path remains editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Suggerimento: il percorso rimane modificabile dopo la selezione. Rimuovere il numero di istanza (ad esempio alias.0 → alias) per scansionare tutte le istanze di un adattatore.",
-	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Suggerimento: il percorso rimane modificabile dopo la selezione. Rimuovere il numero di istanza (ad esempio alias.0 → alias) per scansionare tutte le istanze di un adattatore.",
+	"Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel": "Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel",
 	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances. You can also copy any object ID from the Objects tab and paste it directly into the path field.": "Suggerimento: il percorso rimane modificabile dopo la selezione. Rimuovere il numero dell'istanza (ad esempio alias.0 → alias) per scansionare tutte le istanze. Puoi anche copiare qualsiasi ID oggetto dalla scheda Oggetti e incollarlo direttamente nel campo del percorso.",
 	"Usage in VIS Widgets": "Utilizzo nei widget VIS",
 	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Utilizzare il selettore oggetti nella scheda Percorsi di scansione o digitare un percorso manualmente. Il percorso rimane modificabile dopo la selezione.\n\nPer scansionare tutte le istanze di un adattatore, rimuovere il numero di istanza dal percorso (ad esempio alias.0 → alias). Corrisponde a alias.0, alias.1 e così via.",
-	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Utilizzare il selettore oggetti nella scheda Percorsi di scansione o digitare un percorso manualmente. Il percorso rimane modificabile dopo la selezione.\n\nPer scansionare tutte le istanze di un adattatore, rimuovere il numero di istanza dal percorso (ad esempio alias.0 → alias). Corrisponde a alias.0, alias.1 e così via.",
 	"When enabled, all configured paths will be scanned automatically at the specified interval": "Se abilitato, tutti i percorsi configurati verranno scansionati automaticamente all'intervallo specificato",
-	"e.g. 0_userdata.0 or alias": "per esempio. 0_userdata.0 o alias",
 	"help_json_fields": "<table style=\"width:100%;border-collapse:collapse;font-size:0.875rem\"><thead><tr style=\"border-bottom:1px solid #546e7a\"><th style=\"text-align:left;padding:8px 6px;width:6%\">#</th><th style=\"text-align:left;padding:8px 6px;width:14%\">Chiave</th><th style=\"text-align:left;padding:8px 6px;width:40%\">Descrizione</th><th style=\"text-align:left;padding:8px 6px\">Scopo</th></tr></thead><tbody><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">01</td><td style=\"padding:6px\"><code>id</code></td><td style=\"padding:6px\">Percorso completo del punto dati</td><td style=\"padding:6px\">Identificazione univoca</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">02</td><td style=\"padding:6px\"><code>nome</code></td><td style=\"padding:6px\">nome.comune o ultima parte dell'ID</td><td style=\"padding:6px\">Nome descrittivo</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">03</td><td style=\"padding:6px\"><code>last_ts</code></td><td style=\"padding:6px\">Timestamp Unix (ms) o null</td><td style=\"padding:6px\">Ordinamento in background</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">04</td><td style=\"padding:6px\"><code>last_ts_iso</code></td><td style=\"padding:6px\">Stringa della data formattata</td><td style=\"padding:6px\">Visualizza nella tabella</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">05</td><td style=\"padding:6px\"><code>value</code></td><td style=\"padding:6px\">Valore del punto dati corrente</td><td style=\"padding:6px\">Controllo finale prima dell'eliminazione</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">06</td><td style=\"padding:6px\"><code>status</code></td><td style=\"padding:6px\">attivo, morto, obsoleto, non definito, orfano</td><td style=\"padding:6px\">Classificazione (Inglese)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">07</td><td style=\"padding:6px\"><code>status_de</code></td><td style=\"padding:6px\">attivo, inattivo, veroltet, indefinito, verwaist</td><td style=\"padding:6px\">Classificazione (tedesco)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">08</td><td style=\"padding:6px\"><code>problema</code></td><td style=\"padding:6px\">morto, stantio, orphaned_alias o null</td><td style=\"padding:6px\">Criterio di filtro (null = OK)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">09</td><td style=\"padding:6px\"><code>issue_de</code></td><td style=\"padding:6px\">inaktiv, veraltet, verwaistes Alias o null</td><td style=\"padding:6px\">Criterio di filtro (tedesco)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">10</td><td style=\"padding:6px\"><code>dimensione</code></td><td style=\"padding:6px\">JSON.stringify(val).length</td><td style=\"padding:6px\">Trova i maiali di archiviazione</td></tr></tbody></table>",
 	"help_readme": "<b>Per la documentazione completa, fare clic qui sotto:</b><br><br>• <a href=\"https://github.com/inventtwo/ioBroker.tidy/blob/main/README.md\">Documentazione dell'adattatore</a>",
 	"paypal_donate": "Se vuoi sostenerci.",

package/admin/i18n/nl.json

@@ -3,24 +3,18 @@
 	"Check alias targets": "Controleer aliasdoelen",
 	"Comment (optional)": "Opmerking (optioneel)",
 	"Configure which paths to scan for unused datapoints. Use the object picker or type a path manually. Each path will get its own result state with a JSON table.": "Configureer welke paden moeten worden gescand op ongebruikte datapunten. Gebruik de objectkiezer of typ handmatig een pad. Elk pad krijgt zijn eigen resultaatstatus met een JSON-tabel.",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nPick a single state to exclude one datapoint, or pick a folder/channel to exclude an entire subtree.\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Gegevenspunten die op het tabblad Uitzonderingen worden vermeld, worden weggelaten uit alle scanresultaten en statistieken. Gebruik dit voor configuratiewaarden die zelden veranderen, maar die er niet als dood of verouderd uit mogen zien.\n\nKies een enkele status om één datapunt uit te sluiten, of kies een map/kanaal om een ​​hele subboom uit te sluiten.\n\nElk scankanaal biedt exceptionCount, die aangeeft hoeveel datapunten zijn uitgesloten tijdens de laatste scan (0 als er geen is).",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Gegevenspunten die op het tabblad Uitzonderingen worden vermeld, worden weggelaten uit alle scanresultaten en statistieken. Gebruik dit voor configuratiewaarden die zelden veranderen, maar die er niet als dood of verouderd uit mogen zien.\n\nGebruik de kiezer om individuele datapunten (staten) te selecteren. Om een ​​hele map of substructuur uit te sluiten, typt u het pad rechtstreeks in het veld (bijvoorbeeld 0_userdata.0.config).\n\nElk scankanaal biedt exceptionCount, die aangeeft hoeveel datapunten zijn uitgesloten tijdens de laatste scan (0 als er geen is).",
+	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Gegevenspunten die op het tabblad Uitzonderingen worden vermeld, worden weggelaten uit alle scanresultaten en statistieken. Gebruik dit voor configuratiewaarden die zelden veranderen, maar die er niet als dood of verouderd uit mogen zien.\n\nGebruik de kiezer om individuele datapunten (staten) te selecteren. Om een ​​hele map of substructuur uit te sluiten, typt u het pad rechtstreeks in het veld (bijvoorbeeld 0_userdata.0.config). Jokertekens worden ondersteund: * komt overeen met elk achtervoegsel, ? komt overeen met één teken (bijvoorbeeld 0_userdata.0.rollo.trigger*).\n\nElk scankanaal biedt exceptionCount, die aangeeft hoeveel datapunten zijn uitgesloten tijdens de laatste scan (0 als er geen is).",
 	"Datapoints not updated for this many days are marked as 'dead'": "Datapunten die al zoveel dagen niet zijn bijgewerkt, worden gemarkeerd als 'dood'",
 	"Datapoints not updated for this many days are marked as 'stale'": "Datapunten die al zoveel dagen niet zijn bijgewerkt, worden gemarkeerd als 'verouderd'",
 	"Days until 'dead' (critical)": "Dagen tot 'dood' (kritiek)",
 	"Days until 'stale' (warning)": "Dagen tot 'oud' (waarschuwing)",
-	"Description": "Beschrijving",
 	"Detection Thresholds": "Detectiedrempels",
 	"Each scan result contains a JSON array with the following fields per datapoint:": "Elk scanresultaat bevat een JSON-array met de volgende 10 velden per datapunt:",
 	"Enable automatic scans": "Schakel automatische scans in",
 	"Enabled": "Ingeschakeld",
-	"Enter scan paths on the Scan Paths tab or copy IDs from the Objects tab.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Voer scanpaden in op het tabblad Scanpaden of kopieer ID's vanaf het tabblad Objecten.\n\nOm alle exemplaren van een adapter te scannen, verwijdert u het exemplaarnummer uit het pad (bijvoorbeeld alias.0 → alias). Dit komt overeen met alias.0, alias.1, enzovoort.",
-	"Enter the scan path (e.g. 0_userdata.0, alias, javascript.0). Copy from the Objects tab if needed. Remove the instance number (alias.0 → alias) to scan all instances.": "Voer het scanpad in (bijvoorbeeld 0_userdata.0, alias, javascript.0). Kopieer indien nodig vanaf het tabblad Objecten. Verwijder het exemplaarnummer (alias.0 → alias) om alle exemplaren te scannen.",
 	"Exceptions": "Uitzonderingen",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored (e.g. configuration values that rarely change). Select a single datapoint or a folder to exclude everything beneath it.": "Sluit datapunten uit van scanresultaten die opzettelijk statisch zijn of moeten worden genegeerd (bijvoorbeeld configuratiewaarden die zelden veranderen). Selecteer een enkel datapunt of een map om alles daaronder uit te sluiten.",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config).": "Sluit datapunten uit van scanresultaten die opzettelijk statisch zijn of moeten worden genegeerd. Gebruik de kiezer om individuele datapunten te selecteren. Om een ​​hele map uit te sluiten, typt u het pad handmatig (bijvoorbeeld 0_userdata.0.config).",
+	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).": "Sluit datapunten uit van scanresultaten die opzettelijk statisch zijn of moeten worden genegeerd. Gebruik de kiezer om individuele datapunten te selecteren. Om een ​​hele map uit te sluiten, typt u het pad handmatig (bijvoorbeeld 0_userdata.0.config). Jokertekens worden ondersteund: * komt overeen met elk achtervoegsel, ? komt overeen met één teken (bijvoorbeeld 0_userdata.0.rollo.trigger*).",
 	"Excluded datapoints": "Uitgesloten datapunten",
-	"Field": "Sleutel",
 	"For German tables: Use status_de and issue_de columns\nFor English tables: Use status and issue columns\n\nFilter by 'issue != null' to show only problematic datapoints.": "Voor Duitse tabellen: gebruik de kolommen status_de en issue_de.\nVoor Engelse tabellen: gebruik status- en probleemkolommen\n\nFilter op 'issue != null' om alleen problematische datapunten weer te geven.",
 	"For alias.* paths: Check if target datapoints exist (ghost detection)": "Voor alias.*-paden: Controleer of doeldatapunten bestaan ​​(spookdetectie)",
 	"General Settings": "Algemene instellingen",
@@ -28,37 +22,23 @@
 	"How often the automatic scan should run (minimum 1 hour)": "Hoe vaak de automatische scan moet worden uitgevoerd (minimaal 1 uur)",
 	"If enabled, the adapter will scan the entire object tree and store the result in a separate 'complete' result channel.": "Indien ingeschakeld, scant de adapter de gehele objectboom en slaat het resultaat op in een apart 'volledig' resultaatkanaal.",
 	"JSON Table Field Description": "JSON-tabelveldbeschrijving",
-	"Name": "Naam",
-	"Name (for result state)": "Naam (voor resultaatstatus)",
 	"Name (for result state, optional)": "Naam (voor resultaatstatus, optioneel)",
 	"Object": "Voorwerp",
 	"Optional note, e.g. alarm clock radio station": "Optionele opmerking, b.v. wekkerradiostation",
 	"Optional. If empty, the path will be used as name.": "Optioneel. Indien leeg, wordt het pad als naam gebruikt.",
 	"Path Configuration": "Padconfiguratie",
 	"Paths to scan": "Paden om te scannen",
-	"Pick a folder in the object tree to exclude an entire subtree, or type a single state ID manually (e.g. 0_userdata.0.radio.station).": "Kies een map in de objectboom om een ​​volledige subboom uit te sluiten, of typ handmatig een enkele status-ID (bijvoorbeeld 0_userdata.0.radio.station).",
-	"Pick a folder in the object tree, or type a path manually (e.g. 0_userdata.0). Remove the instance number (alias.0 → alias) to scan all instances.": "Kies een map in de objectboom of typ handmatig een pad (bijvoorbeeld 0_userdata.0). Verwijder het exemplaarnummer (alias.0 → alias) om alle exemplaren te scannen.",
-	"Pick a folder or namespace (e.g. alias, 0_userdata.0, alias.0.Heizungen). Individual datapoints are not shown. The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Kies een map of naamruimte (bijvoorbeeld alias, 0_userdata.0, alias.0.Heizungen). Individuele datapunten worden niet weergegeven. Het pad blijft bewerkbaar. Verwijder het exemplaarnummer (alias.0 → alias) om alle exemplaren te scannen.",
-	"Pick a folder/channel to exclude an entire subtree. To exclude a single state, type its ID directly into the field (e.g. 0_userdata.0.radio.station).": "Kies een map/kanaal om een ​​volledige subboom uit te sluiten. Om een ​​enkele status uit te sluiten, typt u de ID ervan rechtstreeks in het veld (bijvoorbeeld 0_userdata.0.radio.station).",
-	"Pick a path from the object tree or type manually. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Kies een pad uit de objectboom of typ handmatig. Verwijder het exemplaarnummer (bijvoorbeeld alias.0 → alias) om alle exemplaren van een adapter te scannen.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — append a subfolder or remove the instance number (alias.0 → alias) after picking.": "Kies een adapterinstantie (bijvoorbeeld 0_userdata.0, alias.0). Het pad blijft bewerkbaar: voeg een submap toe of verwijder het exemplaarnummer (alias.0 → alias) na het kiezen.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Kies een adapterinstantie (bijvoorbeeld 0_userdata.0, alias.0). Het pad blijft bewerkbaar. Verwijder het exemplaarnummer (alias.0 → alias) om alle exemplaren te scannen.",
-	"Pick an adapter instance or subfolder (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Kies een adapterinstantie of submap (bijvoorbeeld 0_userdata.0, alias.0). Het pad blijft bewerkbaar. Verwijder het exemplaarnummer (alias.0 → alias) om alle exemplaren te scannen.",
-	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config).": "Kies een individueel datapunt om dit uit te sluiten. Om een ​​hele map uit te sluiten, typt u rechtstreeks het mappad (bijvoorbeeld 0_userdata.0.config).",
-	"Purpose": "Doel",
+	"Pick a namespace (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Kies een adapterinstantie of submap (bijvoorbeeld 0_userdata.0, alias.0). Het pad blijft bewerkbaar. Verwijder het exemplaarnummer (alias.0 → alias) om alle exemplaren te scannen.",
+	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config). Use * or ? for wildcard patterns (e.g. 0_userdata.0.rollo.trigger*).": "Kies een individueel datapunt om dit uit te sluiten. Om een ​​hele map uit te sluiten, typt u rechtstreeks het mappad (bijvoorbeeld 0_userdata.0.config). Gebruik * of ? voor jokertekenpatronen (bijvoorbeeld 0_userdata.0.rollo.trigger*).",
 	"Scan Paths": "Paden scannen",
 	"Scan all objects (complete)": "Scan alle objecten (compleet)",
 	"Scan interval (hours)": "Scaninterval (uren)",
 	"Scan path": "Scanpad",
-	"Select a datapoint or folder to exclude. Folders exclude all states beneath them.": "Selecteer een datapunt of map die u wilt uitsluiten. Mappen sluiten alle staten eronder uit.",
-	"Tip: The path remains editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Tip: Het pad blijft bewerkbaar na het kiezen. Verwijder het exemplaarnummer (bijvoorbeeld alias.0 → alias) om alle exemplaren van een adapter te scannen.",
-	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Tip: Het pad blijft bewerkbaar nadat het is gekozen. Verwijder het exemplaarnummer (bijvoorbeeld alias.0 → alias) om alle exemplaren van een adapter te scannen.",
+	"Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel": "Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel",
 	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances. You can also copy any object ID from the Objects tab and paste it directly into the path field.": "Tip: Het pad blijft bewerkbaar nadat het is gekozen. Verwijder het exemplaarnummer (bijvoorbeeld alias.0 → alias) om alle exemplaren te scannen. U kunt ook elke object-ID van het tabblad Objecten kopiëren en deze rechtstreeks in het padveld plakken.",
 	"Usage in VIS Widgets": "Gebruik in VIS-widgets",
 	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Gebruik de objectkiezer op het tabblad Scanpaden of typ handmatig een pad. Het pad blijft bewerkbaar na het kiezen.\n\nOm alle exemplaren van een adapter te scannen, verwijdert u het exemplaarnummer uit het pad (bijvoorbeeld alias.0 → alias). Dit komt overeen met alias.0, alias.1, enzovoort.",
-	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Gebruik de objectkiezer op het tabblad Scanpaden of typ handmatig een pad. Het pad blijft bewerkbaar na het kiezen.\n\nOm alle exemplaren van een adapter te scannen, verwijdert u het exemplaarnummer uit het pad (bijvoorbeeld alias.0 → alias). Dit komt overeen met alias.0, alias.1, enzovoort.",
 	"When enabled, all configured paths will be scanned automatically at the specified interval": "Indien ingeschakeld, worden alle geconfigureerde paden automatisch gescand met het opgegeven interval",
-	"e.g. 0_userdata.0 or alias": "bijv. 0_userdata.0 of alias",
 	"help_json_fields": "<table style=\"width:100%;border-collapse:collapse;font-size:0.875rem\"><thead><tr style=\"border-bottom:1px solid #546e7a\"><th style=\"text-align:left;padding:8px 6px;width:6%\">#</th><th style=\"text-align:left;padding:8px 6px;width:14%\">Sleutel</th><th style=\"text-align:left;padding:8px 6px;width:40%\">Beschrijving</th><th style=\"text-align:left;padding:8px 6px\">Doel</th></tr></thead><tbody><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">01</td><td style=\"padding:6px\"><code>id</code></td><td style=\"padding:6px\">Volledig datapuntpad</td><td style=\"padding:6px\">Unieke identificatie</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">02</td><td style=\"padding:6px\"><code>naam</code></td><td style=\"padding:6px\">common.name of laatste deel van ID</td><td style=\"padding:6px\">Gebruiksvriendelijke naam</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">03</td><td style=\"padding:6px\"><code>last_ts</code></td><td style=\"padding:6px\">Unix-tijdstempel (ms) of null</td><td style=\"padding:6px\">Sorteren op de achtergrond</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">04</td><td style=\"padding:6px\"><code>last_ts_iso</code></td><td style=\"padding:6px\">Geformatteerde datumreeks</td><td style=\"padding:6px\">Weergeven in tabel</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">05</td><td style=\"padding:6px\"><code>waarde</code></td><td style=\"padding:6px\">Huidige datapuntwaarde</td><td style=\"padding:6px\">Laatste controle vóór verwijdering</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">06</td><td style=\"padding:6px\"><code>status</code></td><td style=\"padding:6px\">actief, dood, oud, ongedefinieerd, verweesd</td><td style=\"padding:6px\">Classificatie (Engels)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">07</td><td style=\"padding:6px\"><code>status_de</code></td><td style=\"padding:6px\">actief, inactief, veraltet, undefiniert, verwaist</td><td style=\"padding:6px\">Classificatie (Duits)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">08</td><td style=\"padding:6px\"><code>probleem</code></td><td style=\"padding:6px\">dood, oud, verweesd_alias of null</td><td style=\"padding:6px\">Filtercriterium (null = OK)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">09</td><td style=\"padding:6px\"><code>issue_de</code></td><td style=\"padding:6px\">inaktiv, veraltet, verwaistes Alias of null</td><td style=\"padding:6px\">Filtercriterium (Duits)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">10</td><td style=\"padding:6px\"><code>size</code></td><td style=\"padding:6px\">JSON.stringify(val).length</td><td style=\"padding:6px\">Vindt opslagvarkens</td></tr></tbody></table>",
 	"help_readme": "<b>Klik hieronder voor volledige documentatie:</b><br><br>• <a href=\"https://github.com/inventwo/ioBroker.tidy/blob/main/README.md\">Adapterdocumentatie</a>",
 	"paypal_donate": "Als u ons wilt steunen.",

package/admin/i18n/pl.json

@@ -3,24 +3,18 @@
 	"Check alias targets": "Sprawdź cele aliasów",
 	"Comment (optional)": "Komentarz (opcjonalnie)",
 	"Configure which paths to scan for unused datapoints. Use the object picker or type a path manually. Each path will get its own result state with a JSON table.": "Skonfiguruj ścieżki do skanowania w poszukiwaniu nieużywanych punktów danych. Użyj selektora obiektów lub wpisz ścieżkę ręcznie. Każda ścieżka otrzyma własny stan wyniku z tabelą JSON.",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nPick a single state to exclude one datapoint, or pick a folder/channel to exclude an entire subtree.\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Punkty danych wymienione na karcie Wyjątki są pomijane we wszystkich wynikach skanowania i statystykach. Użyj tej opcji w przypadku wartości konfiguracyjnych, które rzadko się zmieniają, ale nie powinny wyglądać na martwe lub nieaktualne.\n\nWybierz pojedynczy stan, aby wykluczyć jeden punkt danych, lub wybierz folder/kanał, aby wykluczyć całe poddrzewo.\n\nKażdy kanał skanowania zapewnia wyjątekCount pokazujący, ile punktów danych zostało wykluczonych podczas ostatniego skanowania (0, jeśli żaden).",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Punkty danych wymienione na karcie Wyjątki są pomijane we wszystkich wynikach skanowania i statystykach. Użyj tej opcji w przypadku wartości konfiguracyjnych, które rzadko się zmieniają, ale nie powinny wyglądać na martwe lub nieaktualne.\n\nUżyj selektora, aby wybrać poszczególne punkty danych (stany). Aby wykluczyć cały folder lub poddrzewo, wpisz ścieżkę bezpośrednio w polu (np. 0_userdata.0.config).\n\nKażdy kanał skanowania zapewnia wyjątekCount pokazujący, ile punktów danych zostało wykluczonych podczas ostatniego skanowania (0, jeśli żaden).",
+	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Punkty danych wymienione na karcie Wyjątki są pomijane we wszystkich wynikach skanowania i statystykach. Użyj tej opcji w przypadku wartości konfiguracyjnych, które rzadko się zmieniają, ale nie powinny wyglądać na martwe lub nieaktualne.\n\nUżyj selektora, aby wybrać poszczególne punkty danych (stany). Aby wykluczyć cały folder lub poddrzewo, wpisz ścieżkę bezpośrednio w polu (np. 0_userdata.0.config). Obsługiwane są symbole wieloznaczne: * pasuje do dowolnego przyrostka, ? dopasowuje pojedynczy znak (np. 0_userdata.0.rollo.trigger*).\n\nKażdy kanał skanowania zapewnia wyjątekCount pokazujący, ile punktów danych zostało wykluczonych podczas ostatniego skanowania (0, jeśli żaden).",
 	"Datapoints not updated for this many days are marked as 'dead'": "Punkty danych nieaktualizowane przez tyle dni są oznaczone jako „martwe”",
 	"Datapoints not updated for this many days are marked as 'stale'": "Punkty danych nieaktualizowane przez tyle dni są oznaczone jako „nieaktualne”",
 	"Days until 'dead' (critical)": "Dni do „martwy” (krytyczne)",
 	"Days until 'stale' (warning)": "Dni do „nieaktualnego” (ostrzeżenie)",
-	"Description": "Opis",
 	"Detection Thresholds": "Progi detekcji",
 	"Each scan result contains a JSON array with the following fields per datapoint:": "Każdy wynik skanowania zawiera tablicę JSON z następującymi 10 polami na punkt danych:",
 	"Enable automatic scans": "Włącz automatyczne skanowanie",
 	"Enabled": "Włączony",
-	"Enter scan paths on the Scan Paths tab or copy IDs from the Objects tab.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Wprowadź ścieżki skanowania na karcie Ścieżki skanowania lub skopiuj identyfikatory z karty Obiekty.\n\nAby przeskanować wszystkie instancje adaptera, usuń numer instancji ze ścieżki (np. alias.0 → alias). Pasuje do alias.0, alias.1 i tak dalej.",
-	"Enter the scan path (e.g. 0_userdata.0, alias, javascript.0). Copy from the Objects tab if needed. Remove the instance number (alias.0 → alias) to scan all instances.": "Wprowadź ścieżkę skanowania (np. 0_userdata.0, alias, javascript.0). W razie potrzeby skopiuj z karty Obiekty. Usuń numer instancji (alias.0 → alias), aby przeskanować wszystkie instancje.",
 	"Exceptions": "Wyjątki",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored (e.g. configuration values that rarely change). Select a single datapoint or a folder to exclude everything beneath it.": "Wyklucz z wyników skanowania punkty danych, które są celowo statyczne lub powinny zostać zignorowane (np. wartości konfiguracyjne, które rzadko się zmieniają). Wybierz pojedynczy punkt danych lub folder, aby wykluczyć wszystko poniżej.",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config).": "Wyklucz punkty danych z wyników skanowania, które są celowo statyczne lub powinny zostać zignorowane. Użyj selektora, aby wybrać poszczególne punkty danych. Aby wykluczyć cały folder, wpisz ścieżkę ręcznie (np. 0_userdata.0.config).",
+	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).": "Wyklucz punkty danych z wyników skanowania, które są celowo statyczne lub powinny zostać zignorowane. Użyj selektora, aby wybrać poszczególne punkty danych. Aby wykluczyć cały folder, wpisz ścieżkę ręcznie (np. 0_userdata.0.config). Obsługiwane są symbole wieloznaczne: * pasuje do dowolnego przyrostka, ? dopasowuje pojedynczy znak (np. 0_userdata.0.rollo.trigger*).",
 	"Excluded datapoints": "Wykluczone punkty danych",
-	"Field": "Klawisz",
 	"For German tables: Use status_de and issue_de columns\nFor English tables: Use status and issue columns\n\nFilter by 'issue != null' to show only problematic datapoints.": "W przypadku tabel w języku niemieckim: użyj kolumn status_de i Issue_de.\nW przypadku tabel w języku angielskim: Użyj kolumn stanu i wydania\n\nFiltruj według „problem != null”, aby wyświetlić tylko problematyczne punkty danych.",
 	"For alias.* paths: Check if target datapoints exist (ghost detection)": "W przypadku ścieżek alias.*: Sprawdź, czy istnieją docelowe punkty danych (wykrywanie duchów)",
 	"General Settings": "Ustawienia ogólne",
@@ -28,37 +22,23 @@
 	"How often the automatic scan should run (minimum 1 hour)": "Jak często powinno odbywać się automatyczne skanowanie (minimum 1 godzina)",
 	"If enabled, the adapter will scan the entire object tree and store the result in a separate 'complete' result channel.": "Jeśli ta opcja jest włączona, adapter przeskanuje całe drzewo obiektów i zapisze wynik w oddzielnym „kompletnym” kanale wyników.",
 	"JSON Table Field Description": "Opis pola tabeli JSON",
-	"Name": "Nazwa",
-	"Name (for result state)": "Nazwa (dla stanu wyniku)",
 	"Name (for result state, optional)": "Nazwa (dla stanu wyniku, opcjonalnie)",
 	"Object": "Obiekt",
 	"Optional note, e.g. alarm clock radio station": "Opcjonalna notatka, np. stacja radiowa z budzikiem",
 	"Optional. If empty, the path will be used as name.": "Fakultatywny. Jeśli jest pusty, ścieżka zostanie użyta jako nazwa.",
 	"Path Configuration": "Konfiguracja ścieżki",
 	"Paths to scan": "Ścieżki do skanowania",
-	"Pick a folder in the object tree to exclude an entire subtree, or type a single state ID manually (e.g. 0_userdata.0.radio.station).": "Wybierz folder w drzewie obiektów, aby wykluczyć całe poddrzewo, lub wpisz ręcznie pojedynczy identyfikator stanu (np. 0_userdata.0.radio.station).",
-	"Pick a folder in the object tree, or type a path manually (e.g. 0_userdata.0). Remove the instance number (alias.0 → alias) to scan all instances.": "Wybierz folder w drzewie obiektów lub wpisz ścieżkę ręcznie (np. 0_userdata.0). Usuń numer instancji (alias.0 → alias), aby przeskanować wszystkie instancje.",
-	"Pick a folder or namespace (e.g. alias, 0_userdata.0, alias.0.Heizungen). Individual datapoints are not shown. The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Wybierz folder lub przestrzeń nazw (np. alias, 0_userdata.0, alias.0.Heizungen). Poszczególne punkty danych nie są wyświetlane. Ścieżka pozostaje edytowalna — usuń numer instancji (alias.0 → alias), aby przeskanować wszystkie instancje.",
-	"Pick a folder/channel to exclude an entire subtree. To exclude a single state, type its ID directly into the field (e.g. 0_userdata.0.radio.station).": "Wybierz folder/kanał, aby wykluczyć całe poddrzewo. Aby wykluczyć pojedynczy stan, wpisz jego identyfikator bezpośrednio w polu (np. 0_userdata.0.radio.station).",
-	"Pick a path from the object tree or type manually. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Wybierz ścieżkę z drzewa obiektów lub wpisz ręcznie. Usuń numer instancji (np. alias.0 → alias), aby przeskanować wszystkie instancje adaptera.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — append a subfolder or remove the instance number (alias.0 → alias) after picking.": "Wybierz instancję adaptera (np. 0_userdata.0, alias.0). Ścieżka pozostaje edytowalna – po wybraniu dodaj podfolder lub usuń numer instancji (alias.0 → alias).",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Wybierz instancję adaptera (np. 0_userdata.0, alias.0). Ścieżka pozostaje edytowalna — usuń numer instancji (alias.0 → alias), aby przeskanować wszystkie instancje.",
-	"Pick an adapter instance or subfolder (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Wybierz instancję adaptera lub podfolder (np. 0_userdata.0, alias.0). Ścieżka pozostaje edytowalna — usuń numer instancji (alias.0 → alias), aby przeskanować wszystkie instancje.",
-	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config).": "Wybierz pojedynczy punkt danych, aby go wykluczyć. Aby wykluczyć cały folder, wpisz bezpośrednio ścieżkę folderu (np. 0_userdata.0.config).",
-	"Purpose": "Zamiar",
+	"Pick a namespace (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Wybierz instancję adaptera lub podfolder (np. 0_userdata.0, alias.0). Ścieżka pozostaje edytowalna — usuń numer instancji (alias.0 → alias), aby przeskanować wszystkie instancje.",
+	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config). Use * or ? for wildcard patterns (e.g. 0_userdata.0.rollo.trigger*).": "Wybierz pojedynczy punkt danych, aby go wykluczyć. Aby wykluczyć cały folder, wpisz bezpośrednio ścieżkę folderu (np. 0_userdata.0.config). Użyj * lub ? dla wzorców symboli wieloznacznych (np. 0_userdata.0.rollo.trigger*).",
 	"Scan Paths": "Skanuj ścieżki",
 	"Scan all objects (complete)": "Zeskanuj wszystkie obiekty (ukończono)",
 	"Scan interval (hours)": "Interwał skanowania (godziny)",
 	"Scan path": "Ścieżka skanowania",
-	"Select a datapoint or folder to exclude. Folders exclude all states beneath them.": "Wybierz punkt danych lub folder do wykluczenia. Foldery wykluczają wszystkie stany znajdujące się pod nimi.",
-	"Tip: The path remains editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Wskazówka: Ścieżka pozostaje edytowalna po wybraniu. Usuń numer instancji (np. alias.0 → alias), aby przeskanować wszystkie instancje adaptera.",
-	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Wskazówka: Ścieżka pozostaje edytowalna po wybraniu. Usuń numer instancji (np. alias.0 → alias), aby przeskanować wszystkie instancje adaptera.",
+	"Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel": "Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel",
 	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances. You can also copy any object ID from the Objects tab and paste it directly into the path field.": "Wskazówka: Ścieżka pozostaje edytowalna po wybraniu. Usuń numer instancji (np. alias.0 → alias), aby przeskanować wszystkie instancje. Możesz także skopiować dowolny identyfikator obiektu z zakładki Obiekty i wkleić go bezpośrednio w polu ścieżki.",
 	"Usage in VIS Widgets": "Wykorzystanie w widżetach VIS",
 	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Użyj selektora obiektów na karcie Ścieżki skanowania lub wpisz ścieżkę ręcznie. Ścieżka pozostaje edytowalna po wybraniu.\n\nAby przeskanować wszystkie instancje adaptera, usuń numer instancji ze ścieżki (np. alias.0 → alias). Pasuje do alias.0, alias.1 i tak dalej.",
-	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Użyj selektora obiektów na karcie Ścieżki skanowania lub wpisz ścieżkę ręcznie. Ścieżka pozostaje edytowalna po wybraniu.\n\nAby przeskanować wszystkie instancje adaptera, usuń numer instancji ze ścieżki (np. alias.0 → alias). Pasuje do alias.0, alias.1 i tak dalej.",
 	"When enabled, all configured paths will be scanned automatically at the specified interval": "Po włączeniu wszystkie skonfigurowane ścieżki będą skanowane automatycznie w określonych odstępach czasu",
-	"e.g. 0_userdata.0 or alias": "np. 0_userdata.0 lub alias",
 	"help_json_fields": "<table style=\"width:100%;border-collapse:collapse;font-size:0.875rem\"><thead><tr style=\"border-bottom:1px solid #546e7a\"><th style=\"text-align:left;padding:8px 6px;width:6%\">#</th><th style=\"text-align:left;padding:8px 6px;width:14%\">Klucz</th><th style=\"text-align:left;padding:8px 6px;width:40%\">Opis</th><th style=\"text-align:left;padding:8px 6px\">Cel</th></tr></thead><tbody><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">01</td><td style=\"padding:6px\"><code>id</code></td><td style=\"padding:6px\">Pełna ścieżka do punktu danych</td><td style=\"padding:6px\">Unikalna identyfikacja</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">02</td><td style=\"padding:6px\"><code>name</code></td><td style=\"padding:6px\">common.name lub ostatnia część identyfikatora</td><td style=\"padding:6px\">Nazwa przyjazna dla użytkownika</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">03</td><td style=\"padding:6px\"><code>last_ts</code></td><td style=\"padding:6px\">Uniksowy znacznik czasu (ms) lub wartość null</td><td style=\"padding:6px\">Sortowanie w tle</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">04</td><td style=\"padding:6px\"><code>last_ts_iso</code></td><td style=\"padding:6px\">Sformatowany ciąg daty</td><td style=\"padding:6px\">Wyświetl w tabela</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">05</td><td style=\"padding:6px\"><code>value</code></td><td style=\"padding:6px\">Aktualna wartość punktu danych</td><td style=\"padding:6px\">Ostateczna kontrola przed usunięcie</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">06</td><td style=\"padding:6px\"><code>status</code></td><td style=\"padding:6px\">aktywny, martwy, nieaktualny, niezdefiniowany, osierocony</td><td style=\"padding:6px\">Klasyfikacja (angielski)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">07</td><td style=\"padding:6px\"><code>status_de</code></td><td style=\"padding:6px\">aktiv, inaktiv, veraltet, undefiniert, verwaist</td><td style=\"padding:6px\">Klasyfikacja (niemiecki)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">08</td><td style=\"padding:6px\"><code>issue</code></td><td style=\"padding:6px\">martwy, nieaktualny, orphaned_alias lub null</td><td style=\"padding:6px\">Kryterium filtra (null = OK)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0,35)\"><td style=\"padding:6px\">09</td><td style=\"padding:6px\"><code>issue_de</code></td><td style=\"padding:6px\">inaktiv, veraltet, verwaistes Alias lub null</td><td style=\"padding:6px\">Kryterium filtra (niemiecki)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0,35)\"><td style=\"padding:6px\">10</td><td style=\"padding:6px\"><code>size</code></td><td style=\"padding:6px\">JSON.stringify(val).length</td><td style=\"padding:6px\">Wyszukuje miejsca do przechowywania</td></tr></tbody></table>",
 	"help_readme": "<b>Aby uzyskać pełną dokumentację, kliknij tutaj poniżej:</b><br><br> • <a href=\"https://github.com/inventwo/ioBroker.tidy/blob/main/README.md\">Dokumentacja adaptera</a>",
 	"paypal_donate": "Jeśli chcesz nas wesprzeć.",

package/admin/i18n/pt.json

@@ -3,24 +3,18 @@
 	"Check alias targets": "Verifique os destinos de alias",
 	"Comment (optional)": "Comentário (opcional)",
 	"Configure which paths to scan for unused datapoints. Use the object picker or type a path manually. Each path will get its own result state with a JSON table.": "Configure quais caminhos serão verificados em busca de pontos de dados não utilizados. Use o seletor de objetos ou digite um caminho manualmente. Cada caminho obterá seu próprio estado de resultado com uma tabela JSON.",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nPick a single state to exclude one datapoint, or pick a folder/channel to exclude an entire subtree.\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Os pontos de dados listados na guia Exceções são omitidos de todos os resultados e estatísticas da verificação. Use isto para valores de configuração que raramente mudam, mas não devem parecer inativos ou obsoletos.\n\nEscolha um único estado para excluir um ponto de dados ou escolha uma pasta/canal para excluir uma subárvore inteira.\n\nCada canal de varredura fornece exceçãoCount mostrando quantos pontos de dados foram excluídos durante a última varredura (0 se nenhum).",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Os pontos de dados listados na guia Exceções são omitidos de todos os resultados e estatísticas da verificação. Use isto para valores de configuração que raramente mudam, mas não devem parecer inativos ou obsoletos.\n\nUse o seletor para selecionar pontos de dados individuais (estados). Para excluir uma pasta ou subárvore inteira, digite o caminho diretamente no campo (por exemplo, 0_userdata.0.config).\n\nCada canal de varredura fornece exceçãoCount mostrando quantos pontos de dados foram excluídos durante a última varredura (0 se nenhum).",
+	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Os pontos de dados listados na guia Exceções são omitidos de todos os resultados e estatísticas da verificação. Use isto para valores de configuração que raramente mudam, mas não devem parecer inativos ou obsoletos.\n\nUse o seletor para selecionar pontos de dados individuais (estados). Para excluir uma pasta ou subárvore inteira, digite o caminho diretamente no campo (por exemplo, 0_userdata.0.config). Curingas são suportados: * corresponde a qualquer sufixo, ? corresponde a um único caractere (por exemplo, 0_userdata.0.rollo.trigger*).\n\nCada canal de varredura fornece exceçãoCount mostrando quantos pontos de dados foram excluídos durante a última varredura (0 se nenhum).",
 	"Datapoints not updated for this many days are marked as 'dead'": "Os pontos de dados não atualizados por tantos dias são marcados como 'mortos'",
 	"Datapoints not updated for this many days are marked as 'stale'": "Os pontos de dados não atualizados há tantos dias são marcados como 'obsoletos'",
 	"Days until 'dead' (critical)": "Dias até 'morto' (crítico)",
 	"Days until 'stale' (warning)": "Dias até 'obsoleto' (aviso)",
-	"Description": "Descrição",
 	"Detection Thresholds": "Limites de detecção",
 	"Each scan result contains a JSON array with the following fields per datapoint:": "Cada resultado da verificação contém uma matriz JSON com os seguintes 10 campos por ponto de dados:",
 	"Enable automatic scans": "Habilitar verificações automáticas",
 	"Enabled": "Habilitado",
-	"Enter scan paths on the Scan Paths tab or copy IDs from the Objects tab.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Insira os caminhos de digitalização na guia Caminhos de digitalização ou copie os IDs da guia Objetos.\n\nPara verificar todas as instâncias de um adaptador, remova o número da instância do caminho (por exemplo, alias.0 → alias). Isso corresponde a alias.0, alias.1 e assim por diante.",
-	"Enter the scan path (e.g. 0_userdata.0, alias, javascript.0). Copy from the Objects tab if needed. Remove the instance number (alias.0 → alias) to scan all instances.": "Insira o caminho de verificação (por exemplo, 0_userdata.0, alias, javascript.0). Copie da guia Objetos, se necessário. Remova o número da instância (alias.0 → alias) para verificar todas as instâncias.",
 	"Exceptions": "Exceções",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored (e.g. configuration values that rarely change). Select a single datapoint or a folder to exclude everything beneath it.": "Exclua pontos de dados dos resultados da verificação que sejam intencionalmente estáticos ou que devam ser ignorados (por exemplo, valores de configuração que raramente mudam). Selecione um único ponto de dados ou uma pasta para excluir tudo abaixo dele.",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config).": "Exclua pontos de dados dos resultados da verificação que sejam intencionalmente estáticos ou que devam ser ignorados. Use o seletor para selecionar pontos de dados individuais. Para excluir uma pasta inteira, digite o caminho manualmente (por exemplo, 0_userdata.0.config).",
+	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).": "Exclua pontos de dados dos resultados da verificação que sejam intencionalmente estáticos ou que devam ser ignorados. Use o seletor para selecionar pontos de dados individuais. Para excluir uma pasta inteira, digite o caminho manualmente (por exemplo, 0_userdata.0.config). Curingas são suportados: * corresponde a qualquer sufixo, ? corresponde a um único caractere (por exemplo, 0_userdata.0.rollo.trigger*).",
 	"Excluded datapoints": "Pontos de dados excluídos",
-	"Field": "Chave",
 	"For German tables: Use status_de and issue_de columns\nFor English tables: Use status and issue columns\n\nFilter by 'issue != null' to show only problematic datapoints.": "Para tabelas alemãs: use as colunas status_de e issue_de.\nPara tabelas em inglês: use colunas de status e de problemas\n\nFiltre por 'issue != null' para mostrar apenas pontos de dados problemáticos.",
 	"For alias.* paths: Check if target datapoints exist (ghost detection)": "Para caminhos alias.*: verifique se existem pontos de dados de destino (detecção de fantasma)",
 	"General Settings": "Configurações Gerais",
@@ -28,37 +22,23 @@
 	"How often the automatic scan should run (minimum 1 hour)": "Com que frequência a verificação automática deve ser executada (mínimo 1 hora)",
 	"If enabled, the adapter will scan the entire object tree and store the result in a separate 'complete' result channel.": "Se ativado, o adaptador varrerá toda a árvore de objetos e armazenará o resultado em um canal de resultados 'completo' separado.",
 	"JSON Table Field Description": "Descrição do campo da tabela JSON",
-	"Name": "Nome",
-	"Name (for result state)": "Nome (para estado do resultado)",
 	"Name (for result state, optional)": "Nome (para estado do resultado, opcional)",
 	"Object": "Objeto",
 	"Optional note, e.g. alarm clock radio station": "Nota opcional, por ex. estação de rádio despertador",
 	"Optional. If empty, the path will be used as name.": "Opcional. Se estiver vazio, o caminho será usado como nome.",
 	"Path Configuration": "Configuração de caminho",
 	"Paths to scan": "Caminhos para digitalizar",
-	"Pick a folder in the object tree to exclude an entire subtree, or type a single state ID manually (e.g. 0_userdata.0.radio.station).": "Escolha uma pasta na árvore de objetos para excluir uma subárvore inteira ou digite um único ID de estado manualmente (por exemplo, 0_userdata.0.radio.station).",
-	"Pick a folder in the object tree, or type a path manually (e.g. 0_userdata.0). Remove the instance number (alias.0 → alias) to scan all instances.": "Escolha uma pasta na árvore de objetos ou digite um caminho manualmente (por exemplo, 0_userdata.0). Remova o número da instância (alias.0 → alias) para verificar todas as instâncias.",
-	"Pick a folder or namespace (e.g. alias, 0_userdata.0, alias.0.Heizungen). Individual datapoints are not shown. The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Escolha uma pasta ou namespace (por exemplo, alias, 0_userdata.0, alias.0.Heizungen). Os pontos de dados individuais não são mostrados. O caminho permanece editável – remova o número da instância (alias.0 → alias) para verificar todas as instâncias.",
-	"Pick a folder/channel to exclude an entire subtree. To exclude a single state, type its ID directly into the field (e.g. 0_userdata.0.radio.station).": "Escolha uma pasta/canal para excluir uma subárvore inteira. Para excluir um único estado, digite seu ID diretamente no campo (por exemplo, 0_userdata.0.radio.station).",
-	"Pick a path from the object tree or type manually. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Escolha um caminho na árvore de objetos ou digite-o manualmente. Remova o número da instância (por exemplo, alias.0 → alias) para verificar todas as instâncias de um adaptador.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — append a subfolder or remove the instance number (alias.0 → alias) after picking.": "Escolha uma instância do adaptador (por exemplo, 0_userdata.0, alias.0). O caminho permanece editável – anexe uma subpasta ou remova o número da instância (alias.0 → alias) após a escolha.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Escolha uma instância do adaptador (por exemplo, 0_userdata.0, alias.0). O caminho permanece editável – remova o número da instância (alias.0 → alias) para verificar todas as instâncias.",
-	"Pick an adapter instance or subfolder (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Escolha uma instância ou subpasta do adaptador (por exemplo, 0_userdata.0, alias.0). O caminho permanece editável – remova o número da instância (alias.0 → alias) para verificar todas as instâncias.",
-	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config).": "Escolha um ponto de dados individual para excluí-lo. Para excluir uma pasta inteira, digite o caminho da pasta diretamente (por exemplo, 0_userdata.0.config).",
-	"Purpose": "Propósito",
+	"Pick a namespace (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Escolha uma instância ou subpasta do adaptador (por exemplo, 0_userdata.0, alias.0). O caminho permanece editável – remova o número da instância (alias.0 → alias) para verificar todas as instâncias.",
+	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config). Use * or ? for wildcard patterns (e.g. 0_userdata.0.rollo.trigger*).": "Escolha um ponto de dados individual para excluí-lo. Para excluir uma pasta inteira, digite o caminho da pasta diretamente (por exemplo, 0_userdata.0.config). Use * ou ? para padrões curinga (por exemplo, 0_userdata.0.rollo.trigger*).",
 	"Scan Paths": "Caminhos de digitalização",
 	"Scan all objects (complete)": "Digitalizar todos os objetos (completo)",
 	"Scan interval (hours)": "Intervalo de verificação (horas)",
 	"Scan path": "Caminho de verificação",
-	"Select a datapoint or folder to exclude. Folders exclude all states beneath them.": "Selecione um ponto de dados ou pasta para excluir. As pastas excluem todos os estados abaixo delas.",
-	"Tip: The path remains editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Dica: O caminho permanece editável após a seleção. Remova o número da instância (por exemplo, alias.0 → alias) para verificar todas as instâncias de um adaptador.",
-	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Dica: o caminho permanece editável após a seleção. Remova o número da instância (por exemplo, alias.0 → alias) para verificar todas as instâncias de um adaptador.",
+	"Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel": "Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel",
 	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances. You can also copy any object ID from the Objects tab and paste it directly into the path field.": "Dica: o caminho permanece editável após a seleção. Remova o número da instância (por exemplo, alias.0 → alias) para verificar todas as instâncias. Você também pode copiar qualquer ID de objeto da guia Objetos e colá-lo diretamente no campo de caminho.",
 	"Usage in VIS Widgets": "Uso em widgets VIS",
 	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Use o seletor de objetos na guia Caminhos de verificação ou digite um caminho manualmente. O caminho permanece editável após a escolha.\n\nPara verificar todas as instâncias de um adaptador, remova o número da instância do caminho (por exemplo, alias.0 → alias). Isso corresponde a alias.0, alias.1 e assim por diante.",
-	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Use o seletor de objetos na guia Caminhos de verificação ou digite um caminho manualmente. O caminho permanece editável após a escolha.\n\nPara verificar todas as instâncias de um adaptador, remova o número da instância do caminho (por exemplo, alias.0 → alias). Isso corresponde a alias.0, alias.1 e assim por diante.",
 	"When enabled, all configured paths will be scanned automatically at the specified interval": "Quando ativado, todos os caminhos configurados serão verificados automaticamente no intervalo especificado",
-	"e.g. 0_userdata.0 or alias": "por exemplo 0_userdata.0 ou alias",
 	"help_json_fields": "<table style=\"width:100%;border-collapse:collapse;font-size:0.875rem\"><thead><tr style=\"border-bottom:1px solid #546e7a\"><th style=\"text-align:left;padding:8px 6px;width:6%\">#</th><th style=\"text-align:left;padding:8px 6px;width:14%\">Chave</th><th style=\"text-align:left;padding:8px 6px;width:40%\">Descrição</th><th style=\"text-align:left;padding:8px 6px\">Objetivo</th></tr></thead><tbody><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">01</td><td style=\"padding:6px\"><code>id</code></td><td style=\"padding:6px\">Caminho completo do ponto de dados</td><td style=\"padding:6px\">Identificação exclusiva</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">02</td><td style=\"padding:6px\"><code>nome</code></td><td style=\"padding:6px\">common.name ou última parte do ID</td><td style=\"padding:6px\">Nome amigável</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">03</td><td style=\"padding:6px\"><code>last_ts</code></td><td style=\"padding:6px\">carimbo de data/hora Unix (ms) ou nulo</td><td style=\"padding:6px\">Classificação em segundo plano</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">04</td><td style=\"padding:6px\"><code>last_ts_iso</code></td><td style=\"padding:6px\">String de data formatada</td><td style=\"padding:6px\">Exibir em tabela</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">05</td><td style=\"padding:6px\"><code>value</code></td><td style=\"padding:6px\">Valor do ponto de dados atual</td><td style=\"padding:6px\">Verificação final antes exclusão</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">06</td><td style=\"padding:6px\"><code>status</code></td><td style=\"padding:6px\">ativo, morto, obsoleto, indefinido, órfão</td><td style=\"padding:6px\">Classificação (Inglês)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">07</td><td style=\"padding:6px\"><code>status_de</code></td><td style=\"padding:6px\">ativo, inativo, veraltet, undefiniert, verwaist</td><td style=\"padding:6px\">Classificação (alemão)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">08</td><td style=\"padding:6px\"><code>issue</code></td><td style=\"padding:6px\">morto, obsoleto, orphaned_alias ou nulo</td><td style=\"padding:6px\">Critério de filtro (null = OK)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">09</td><td style=\"padding:6px\"><code>issue_de</code></td><td style=\"padding:6px\">inaktiv, veraltet, verwaistes Alias ou null</td><td style=\"padding:6px\">Critério de filtro (alemão)</td></tr><tr style=\"border-bottom:1px solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">10</td><td style=\"padding:6px\"><code>size</code></td><td style=\"padding:6px\">JSON.stringify(val).length</td><td style=\"padding:6px\">Encontra consumidores de armazenamento</td></tr></tbody></table>",
 	"help_readme": "<b>Para obter a documentação completa, clique aqui abaixo:</b><br><br>• <a href=\"https://github.com/inventwo/ioBroker.tidy/blob/main/README.md\">Documentação do adaptador</a>",
 	"paypal_donate": "Se você gostaria de nos apoiar.",

package/admin/i18n/ru.json

@@ -3,24 +3,18 @@
 	"Check alias targets": "Проверьте цели псевдонимов",
 	"Comment (optional)": "Комментарий (необязательно)",
 	"Configure which paths to scan for unused datapoints. Use the object picker or type a path manually. Each path will get its own result state with a JSON table.": "Настройте пути для сканирования неиспользуемых точек данных. Используйте средство выбора объектов или введите путь вручную. Каждый путь получит свое собственное состояние результата с таблицей JSON.",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nPick a single state to exclude one datapoint, or pick a folder/channel to exclude an entire subtree.\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Точки данных, перечисленные на вкладке «Исключения», исключаются из всех результатов сканирования и статистики. Используйте это для значений конфигурации, которые редко меняются, но не должны выглядеть устаревшими или устаревшими.\n\nВыберите одно состояние, чтобы исключить одну точку данных, или выберите папку/канал, чтобы исключить все поддерево.\n\nКаждый канал сканирования предоставляетExceptionCount, показывающий, сколько точек данных было исключено во время последнего сканирования (0, если нет).",
-	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Точки данных, перечисленные на вкладке «Исключения», исключаются из всех результатов сканирования и статистики. Используйте это для значений конфигурации, которые редко меняются, но не должны выглядеть устаревшими или устаревшими.\n\nИспользуйте средство выбора, чтобы выбрать отдельные точки данных (состояния). Чтобы исключить всю папку или поддерево, введите путь непосредственно в поле (например, 0_userdata.0.config).\n\nКаждый канал сканирования предоставляетExceptionCount, показывающий, сколько точек данных было исключено во время последнего сканирования (0, если нет).",
+	"Datapoints listed on the Exceptions tab are omitted from all scan results and statistics. Use this for configuration values that rarely change but should not appear as dead or stale.\n\nUse the picker to select individual datapoints (states). To exclude an entire folder or subtree, type the path directly into the field (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).\n\nEach scan channel provides exceptionCount showing how many datapoints were excluded during the last scan (0 if none).": "Точки данных, перечисленные на вкладке «Исключения», исключаются из всех результатов сканирования и статистики. Используйте это для значений конфигурации, которые редко меняются, но не должны выглядеть устаревшими или устаревшими.\n\nИспользуйте средство выбора, чтобы выбрать отдельные точки данных (состояния). Чтобы исключить всю папку или поддерево, введите путь непосредственно в поле (например, 0_userdata.0.config). Поддерживаются подстановочные знаки: * соответствует любому суффиксу, ? соответствует одному символу (например, 0_userdata.0.rollo.trigger*).\n\nКаждый канал сканирования предоставляетExceptionCount, показывающий, сколько точек данных было исключено во время последнего сканирования (0, если нет).",
 	"Datapoints not updated for this many days are marked as 'dead'": "Точки данных, не обновлявшиеся в течение этого количества дней, помечены как «мертвые».",
 	"Datapoints not updated for this many days are marked as 'stale'": "Точки данных, не обновлявшиеся в течение этого количества дней, помечаются как устаревшие.",
 	"Days until 'dead' (critical)": "Дней до «мертвого» (критическое)",
 	"Days until 'stale' (warning)": "Дней до устаревания (предупреждение)",
-	"Description": "Описание",
 	"Detection Thresholds": "Пороги обнаружения",
 	"Each scan result contains a JSON array with the following fields per datapoint:": "Каждый результат сканирования содержит массив JSON со следующими 10 полями на точку данных:",
 	"Enable automatic scans": "Включить автоматическое сканирование",
 	"Enabled": "Включено",
-	"Enter scan paths on the Scan Paths tab or copy IDs from the Objects tab.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Введите пути сканирования на вкладке «Пути сканирования» или скопируйте идентификаторы на вкладке «Объекты».\n\nЧтобы просканировать все экземпляры адаптера, удалите номер экземпляра из пути (например, alias.0 → alias). Это соответствует псевдониму 0, псевдониму 1 и т. д.",
-	"Enter the scan path (e.g. 0_userdata.0, alias, javascript.0). Copy from the Objects tab if needed. Remove the instance number (alias.0 → alias) to scan all instances.": "Введите путь сканирования (например, 0_userdata.0, псевдоним, javascript.0). При необходимости скопируйте с вкладки «Объекты». Удалите номер экземпляра (псевдоним.0 → псевдоним), чтобы просканировать все экземпляры.",
 	"Exceptions": "Исключения",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored (e.g. configuration values that rarely change). Select a single datapoint or a folder to exclude everything beneath it.": "Исключите из результатов сканирования точки данных, которые намеренно статичны или которые следует игнорировать (например, значения конфигурации, которые редко меняются). Выберите одну точку данных или папку, чтобы исключить все, что находится под ней.",
-	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config).": "Исключите из результатов сканирования точки данных, которые намеренно статичны или которые следует игнорировать. Используйте средство выбора, чтобы выбрать отдельные точки данных. Чтобы исключить всю папку, введите путь вручную (например, 0_userdata.0.config).",
+	"Exclude datapoints from scan results that are intentionally static or should be ignored. Use the picker to select individual datapoints. To exclude an entire folder, type the path manually (e.g. 0_userdata.0.config). Wildcards are supported: * matches any suffix, ? matches a single character (e.g. 0_userdata.0.rollo.trigger*).": "Исключите из результатов сканирования точки данных, которые намеренно статичны или которые следует игнорировать. Используйте средство выбора, чтобы выбрать отдельные точки данных. Чтобы исключить всю папку, введите путь вручную (например, 0_userdata.0.config). Поддерживаются подстановочные знаки: * соответствует любому суффиксу, ? соответствует одному символу (например, 0_userdata.0.rollo.trigger*).",
 	"Excluded datapoints": "Исключенные точки данных",
-	"Field": "Ключ",
 	"For German tables: Use status_de and issue_de columns\nFor English tables: Use status and issue columns\n\nFilter by 'issue != null' to show only problematic datapoints.": "Для немецких таблиц: используйте столбцы status_de и Issue_de.\nДля английских таблиц: используйте столбцы состояния и проблемы.\n\nОтфильтруйте по «проблеме!= null», чтобы отобразить только проблемные точки данных.",
 	"For alias.* paths: Check if target datapoints exist (ghost detection)": "Для путей alias.*: проверьте, существуют ли целевые точки данных (обнаружение призраков).",
 	"General Settings": "Общие настройки",
@@ -28,37 +22,23 @@
 	"How often the automatic scan should run (minimum 1 hour)": "Как часто должно выполняться автоматическое сканирование (минимум 1 час)",
 	"If enabled, the adapter will scan the entire object tree and store the result in a separate 'complete' result channel.": "Если этот параметр включен, адаптер просканирует все дерево объектов и сохранит результат в отдельном «полном» канале результатов.",
 	"JSON Table Field Description": "Описание поля таблицы JSON",
-	"Name": "Имя",
-	"Name (for result state)": "Имя (для состояния результата)",
 	"Name (for result state, optional)": "Имя (для состояния результата, необязательно)",
 	"Object": "Объект",
 	"Optional note, e.g. alarm clock radio station": "Необязательное примечание, например. радиостанция будильника",
 	"Optional. If empty, the path will be used as name.": "Необязательный. Если пусто, путь будет использоваться в качестве имени.",
 	"Path Configuration": "Конфигурация пути",
 	"Paths to scan": "Пути для сканирования",
-	"Pick a folder in the object tree to exclude an entire subtree, or type a single state ID manually (e.g. 0_userdata.0.radio.station).": "Выберите папку в дереве объектов, чтобы исключить все поддерево, или введите один идентификатор состояния вручную (например, 0_userdata.0.radio.station).",
-	"Pick a folder in the object tree, or type a path manually (e.g. 0_userdata.0). Remove the instance number (alias.0 → alias) to scan all instances.": "Выберите папку в дереве объектов или введите путь вручную (например, 0_userdata.0). Удалите номер экземпляра (псевдоним.0 → псевдоним), чтобы просканировать все экземпляры.",
-	"Pick a folder or namespace (e.g. alias, 0_userdata.0, alias.0.Heizungen). Individual datapoints are not shown. The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Выберите папку или пространство имен (например, псевдоним, 0_userdata.0, alias.0.Heizungen). Отдельные точки данных не показаны. Путь остается доступным для редактирования — удалите номер экземпляра (псевдоним.0 → псевдоним), чтобы сканировать все экземпляры.",
-	"Pick a folder/channel to exclude an entire subtree. To exclude a single state, type its ID directly into the field (e.g. 0_userdata.0.radio.station).": "Выберите папку/канал, чтобы исключить все поддерево. Чтобы исключить одно состояние, введите его идентификатор непосредственно в поле (например, 0_userdata.0.radio.station).",
-	"Pick a path from the object tree or type manually. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Выберите путь из дерева объектов или введите его вручную. Удалите номер экземпляра (например, псевдоним.0 → псевдоним), чтобы просканировать все экземпляры адаптера.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — append a subfolder or remove the instance number (alias.0 → alias) after picking.": "Выберите экземпляр адаптера (например, 0_userdata.0, alias.0). Путь остается доступным для редактирования — добавьте подпапку или удалите номер экземпляра (псевдоним.0 → псевдоним) после выбора.",
-	"Pick an adapter instance (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Выберите экземпляр адаптера (например, 0_userdata.0, alias.0). Путь остается доступным для редактирования — удалите номер экземпляра (псевдоним.0 → псевдоним), чтобы сканировать все экземпляры.",
-	"Pick an adapter instance or subfolder (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Выберите экземпляр адаптера или подпапку (например, 0_userdata.0, alias.0). Путь остается доступным для редактирования — удалите номер экземпляра (псевдоним.0 → псевдоним), чтобы сканировать все экземпляры.",
-	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config).": "Выберите отдельную точку данных, чтобы исключить ее. Чтобы исключить всю папку, введите путь к папке напрямую (например, 0_userdata.0.config).",
-	"Purpose": "Цель",
+	"Pick a namespace (e.g. 0_userdata.0, alias.0). The path stays editable — remove the instance number (alias.0 → alias) to scan all instances.": "Выберите экземпляр адаптера или подпапку (например, 0_userdata.0, alias.0). Путь остается доступным для редактирования — удалите номер экземпляра (псевдоним.0 → псевдоним), чтобы сканировать все экземпляры.",
+	"Pick an individual datapoint to exclude it. To exclude an entire folder, type the folder path directly (e.g. 0_userdata.0.config). Use * or ? for wildcard patterns (e.g. 0_userdata.0.rollo.trigger*).": "Выберите отдельную точку данных, чтобы исключить ее. Чтобы исключить всю папку, введите путь к папке напрямую (например, 0_userdata.0.config). Используйте * или ? для шаблонов подстановочных знаков (например, 0_userdata.0.rollo.trigger*).",
 	"Scan Paths": "Сканировать пути",
 	"Scan all objects (complete)": "Сканировать все объекты (полное)",
 	"Scan interval (hours)": "Интервал сканирования (часы)",
 	"Scan path": "Путь сканирования",
-	"Select a datapoint or folder to exclude. Folders exclude all states beneath them.": "Выберите точку данных или папку, которую нужно исключить. Папки исключают все состояния, находящиеся под ними.",
-	"Tip: The path remains editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Совет: После выбора путь остается доступным для редактирования. Удалите номер экземпляра (например, псевдоним.0 → псевдоним), чтобы просканировать все экземпляры адаптера.",
-	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances of an adapter.": "Совет: После выбора путь остается доступным для редактирования. Удалите номер экземпляра (например, псевдоним.0 → псевдоним), чтобы просканировать все экземпляры адаптера.",
+	"Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel": "Team inventwo •  <a href=\"https://github.com/inventwo\">https://github.com/inventwo</a> • by skvarel",
 	"Tip: The path stays editable after picking. Remove the instance number (e.g. alias.0 → alias) to scan all instances. You can also copy any object ID from the Objects tab and paste it directly into the path field.": "Совет: После выбора путь остается доступным для редактирования. Удалите номер экземпляра (например, псевдоним.0 → псевдоним), чтобы просканировать все экземпляры. Вы также можете скопировать любой идентификатор объекта со вкладки «Объекты» и вставить его непосредственно в поле пути.",
 	"Usage in VIS Widgets": "Использование в виджетах VIS",
 	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\n\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Используйте средство выбора объектов на вкладке «Пути сканирования» или введите путь вручную. Путь остается доступным для редактирования после выбора.\n\nЧтобы просканировать все экземпляры адаптера, удалите номер экземпляра из пути (например, alias.0 → alias). Это соответствует псевдониму 0, псевдониму 1 и т. д.",
-	"Use the object picker on the Scan Paths tab or type a path manually. The path stays editable after picking.\nTo scan all instances of an adapter, remove the instance number from the path (e.g. alias.0 → alias). This matches alias.0, alias.1, and so on.": "Используйте средство выбора объектов на вкладке «Пути сканирования» или введите путь вручную. Путь остается доступным для редактирования после выбора.\n\nЧтобы просканировать все экземпляры адаптера, удалите номер экземпляра из пути (например, alias.0 → alias). Это соответствует псевдониму 0, псевдониму 1 и т. д.",
 	"When enabled, all configured paths will be scanned automatically at the specified interval": "Если этот параметр включен, все настроенные пути будут сканироваться автоматически с указанным интервалом.",
-	"e.g. 0_userdata.0 or alias": "например 0_userdata.0 или псевдоним",
 	"help_json_fields": "<table style=\"width:100%;border-collapse:collapse;font-size:0.875rem\"><thead><tr style=\"border-bottom:1px Solid #546e7a\"><th style=\"text-align:left;padding:8px 6px;width:6%\">#</th><th style=\"text-align:left;padding:8px 6px;width:14%\">Ключ</th><th style=\"text-align:left;padding:8px 6px;width:40%\">Описание</th><th style=\"text-align:left;padding:8px 6px\">Цель</th></tr></thead><tbody><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">01</td><td style=\"padding:6px\"><code>id</code></td><td style=\"padding:6px\">Полный путь к точке данных</td><td style=\"padding:6px\">Уникальная идентификация</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">02</td><td style=\"padding:6px\"><code>имя</code></td><td style=\"padding:6px\">common.name или последняя часть идентификатора</td><td style=\"padding:6px\">Удобное имя</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">03</td><td style=\"padding:6px\"><code>last_ts</code></td><td style=\"padding:6px\">Временная метка Unix (мс) или ноль</td><td style=\"padding:6px\">Сортировка по фон</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">04</td><td style=\"padding:6px\"><code>last_ts_iso</code></td><td style=\"padding:6px\">Отформатированная строка даты</td><td style=\"padding:6px\">Отображение в таблице</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">05</td><td style=\"padding:6px\"><code>value</code></td><td style=\"padding:6px\">Текущее значение точки данных</td><td style=\"padding:6px\">Окончательная проверка перед удаление</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">06</td><td style=\"padding:6px\"><code>статус</code></td><td style=\"padding:6px\">активный, мертвый, устаревший, неопределенный, потерянный</td><td style=\"padding:6px\">Классификация (английский)</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">07</td><td style=\"padding:6px\"><code>status_de</code></td><td style=\"padding:6px\">aktiv, inaktiv, veraltet, undefiniert, verwaist</td><td style=\"padding:6px\">Классификация (немецкий)</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">08</td><td style=\"padding:6px\"><code>issue</code></td><td style=\"padding:6px\">мертвый, устаревший, orphaned_alias или null</td><td style=\"padding:6px\">Критерий фильтра (null = OK)</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">09</td><td style=\"padding:6px\"><code>issue_de</code></td><td style=\"padding:6px\">inaktiv, veraltet, verwaistes Псевдоним или ноль</td><td style=\"padding:6px\">Критерий фильтра (немецкий)</td></tr><tr style=\"border-bottom:1px Solid rgba(84,110,122,0.35)\"><td style=\"padding:6px\">10</td><td style=\"padding:6px\"><code>size</code></td><td style=\"padding:6px\">JSON.stringify(val).length</td><td style=\"padding:6px\">Находит ресурсы хранилища</td></tr></tbody></table>",
 	"help_readme": "<b>Для получения полной документации нажмите здесь ниже:</b><br><br>• <a href=\"https://github.com/inventwo/ioBroker.tidy/blob/main/README.md\">Документация по адаптеру</a>",
 	"paypal_donate": "Если вы хотите поддержать нас.",