iobroker.sprinklecontrol 1.0.7 → 1.0.9

package/io-package.json

@@ -1,7 +1,7 @@
 {
   "common": {
     "name": "sprinklecontrol",
-    "version": "1.0.7",
+    "version": "1.0.9",
     "titleLang": {
       "en": "Sprinkler Control",
       "de": "Sprinklersteuerung",
@@ -19,6 +19,32 @@
       "Dirk Peter <dirk.peter@freenet.de>"
     ],
     "news": {
+      "1.0.9": {
+        "en": "Fixed error reading the soil moisture sensor",
+        "de": "Fehler beim Auslesen des Bodenfeuchtigkeitssensors behoben",
+        "ru": "Исправлена ошибка считывания показаний датчика влажности почвы.",
+        "pt": "Erro corrigido na leitura do sensor de umidade do solo",
+        "nl": "Fout bij het uitlezen van de bodemvochtigheidssensor gecorrigeerd.",
+        "fr": "Correction d'une erreur de lecture du capteur d'humidité du sol",
+        "it": "Risolto l'errore di lettura del sensore di umidità del suolo",
+        "es": "Se corrigió un error en la lectura del sensor de humedad del suelo.",
+        "pl": "Naprawiono błąd odczytu czujnika wilgotności gleby",
+        "uk": "Виправлена помилка зчитування даних датчика вологості ґрунту",
+        "zh-cn": "修复了读取土壤湿度传感器的错误"
+      },
+      "1.0.8": {
+        "en": "Fixed error in \"Command without response\"\nWater Pressure Control Revised\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] completed",
+        "de": "Fehler behoben in \"Befehl ohne Antwort\"\nWasserdruckregelung überarbeitet\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] abgeschlossen",
+        "ru": "Исправленная ошибка в «Команда без ответа»\nКонтроль давления воды пересмотрен\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022]",
+        "pt": "Erro corrigido em \"Comando sem resposta\"\nControlo da pressão da água revisto\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] concluído",
+        "nl": "Vaste fout in \"Command zonder respons\"\nWaterdrukregeling herzien\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] voltooid",
+        "fr": "Erreur corrigée dans \"Commande sans réponse\"\nContrôle de la pression d'eau révisé\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] complété",
+        "it": "Errore fisso in \"Comando senza risposta\"\nControllo della pressione dell'acqua\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] completato",
+        "es": "Error fijo en \"Command sin respuesta\"\nControl de la presión del agua revisado\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] completado",
+        "pl": "Naprawiono błąd w \"Polecenie bez odpowiedzi\"\nRegulacja ciśnienia wody\njoBroker- Bot [E6004], [W1127], [W1133], [W1134], [S6022] zakończone",
+        "uk": "Виправлена помилка в \"Command без відповіді\"\nКонтроль тиску води\nioBroker-Bot [E6004], [W1127], [W1134], [S6022] завершено",
+        "zh-cn": "\"无回复命令\"中的固定错误\n水压控制修订\nioBroker-Bot [E6004], [W1127], [W1133], [W1134], [S6022] 完成"
+      },
       "1.0.7": {
         "en": "Added pressure monitoring.",
         "de": "Drucküberwachung hinzugefügt.",
@@ -83,32 +109,6 @@
         "pl": "Ciśnienie zaworu nadmiarowego dodane po nawadnianiu.",
         "uk": "Клапан для зняття тиску додається після поливу.",
         "zh-cn": "灌溉后增加了减压阀."
-      },
-      "1.0.2": {
-        "en": "Added times for the irrigation ban",
-        "de": "Zusätzliche Zeiten für das Bewässerungsverbot",
-        "ru": "Добавлено время для запрета ирригации",
-        "pt": "Tempos adicionais para a proibição da irrigação",
-        "nl": "Toegevoegde tijden voor het irrigatieverbod",
-        "fr": "Ajout de temps pour l'interdiction d'irrigation",
-        "it": "Aggiunti i tempi per il divieto di irrigazione",
-        "es": "Tiempos adicionales para la prohibición de riego",
-        "pl": "Dodano czasy zakazu nawadniania",
-        "uk": "Додані часи для поливу заборони",
-        "zh-cn": "灌溉禁令增加的时间"
-      },
-      "1.0.1": {
-        "en": "Add Homematic ON_TIME\nAdapter configuration revised\nioBroker-Bot [E4041], [E4043] completed",
-        "de": "Homematic ON TIME hinzufügen\nAdapterkonfiguration überarbeitet\nioBroker-Bot [E4041], [E4043] abgeschlossen",
-        "ru": "Добавить Homematic on time\nПересмотренная конфигурация адаптера\nioBroker-Bot [E4041], [E4043]",
-        "pt": "Adicionar tempo de on  metragem homemática\nA configuração do adaptador foi revista\nioBroker-Bot [E4041], [E4043] completado",
-        "nl": "Homematisch ON TIME toevoegen\nAdapterconfiguratie herzien\nioBroker-Bot [E4041], [E4043] voltooid",
-        "fr": "Ajouter Homematic ON TIME\nConfiguration de l'adaptateur révisée\nioBroker-Bot [E4041], [E4043] terminé",
-        "it": "Aggiungi Homematic ON TIME\nConfigurazione adattatore revisionata\nioBroker-Bot [E4041], [E4043] completato",
-        "es": "Añadir Homematic ON TIME\nAjuste revisado de la configuración del adaptador\nioBroker-Bot [E4041], [E4043] completado",
-        "pl": "Dodaj homematic on _ time\nZmieniona konfiguracja adaptera\njoBroker- Bot [E4041], [E4043] ukończone",
-        "uk": "Додати Homematic ON TIME\nПереглянуто налаштування адаптера\nioBroker-Bot [E4041], [E4043] завершено",
-        "zh-cn": "添加自定义 ON TIME\n修改适应器配置\nioBroker-Bot [E4041], [E4043] 完成"
       }
     },
     "desc": {
@@ -193,8 +193,10 @@
     "startOfInterruption": "10:00",
     "endOfInterruption": "18:00",
     "publicWeekend": true,
+    "publicWeekend2": true,
     "weekEndLiving": "07:30",
     "publicHolidays": false,
+    "publicHolidays2": false,
     "publicHolInstance": "",
     "latitude": "",
     "longitude": "",
@@ -297,7 +299,7 @@
       "_id": "evaporation.ETpCurrent",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "value",
         "name": "Calculation of the current pot. Evapotranspiration",
         "desc": {
           "en": "Calculation of the current pot. Evapotranspiration",
@@ -324,7 +326,7 @@
       "_id": "evaporation.ETpToday",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "value",
         "name": "today's pot. Evapotranspiration",
         "desc": {
           "en": "today's pot. Evapotranspiration",
@@ -351,7 +353,7 @@
       "_id": "evaporation.ETpYesterday",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "value",
         "name": "yesterday's pot. Evapotranspiration",
         "desc": {
           "en": "yesterday's pot. Evapotranspiration",
@@ -378,7 +380,7 @@
       "_id": "evaporation.dailyHighTemp",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "value",
         "name": "Daily High Temperature",
         "desc": {
           "en": "Daily high temperature",
@@ -468,10 +470,6 @@
           "zh-cn": "自动或手动控制喷头"
         },
         "type": "boolean",
-        "states": {
-          "false": "off",
-          "true": "Auto"
-        },
         "read": true,
         "write": true,
         "def": true
@@ -498,7 +496,7 @@
           "zh-cn": "立即启动灌溉过程"
         },
         "type": "boolean",
-        "read": true,
+        "read": false,
         "write": true,
         "def": false
       },
@@ -508,7 +506,7 @@
       "_id": "control.parallelOfMax",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "text",
         "name": "parallel of max Sprinklers",
         "desc": {
           "en": "Number of sprinklers that are currently running in parallel",
@@ -534,7 +532,7 @@
       "_id": "control.restFlow",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "text",
         "name": "rest Flow of Pump",
         "desc": {
           "en": "Rest flow of the pump in l/h",
@@ -581,7 +579,7 @@
       "_id": "info.nextAutoStart",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "text",
         "name": "Next automatic start of the sprinklers",
         "desc": {
           "en": "Next automatic start of the sprinklers",
@@ -607,7 +605,7 @@
       "_id": "info.rainToday",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "value",
         "name": "Amount of rain today",
         "desc": {
           "en": "Amount of rain today",
@@ -634,7 +632,7 @@
       "_id": "info.rainTomorrow",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "value",
         "name": "Amount of rain tomorrow",
         "desc": {
           "en": "Amount of rain tomorrow",
@@ -661,7 +659,7 @@
       "_id": "info.cisternState",
       "type": "state",
       "common": {
-        "role": "indicator",
+        "role": "text",
         "name": "State of the cistern",
         "desc": {
           "en": "State of the cistern",

package/lib/evaporation.js

@@ -374,7 +374,7 @@ const evaporation = {
         adapter.log.debug(`${curTemperature.val}°C | ${curHumidity.val}% | ${curIllumination.val} | ${curWindSpeed.val}km/h | ts: ${curTime} - lastChangeEvaPor: ${lastChangeEvaPor} = timeDifference: ${timeDifference}`);
 
         if (timeDifference) {
-            setTimeout(() => {
+            adapter.setTimeout(() => {
                 calcEvaporation(timeDifference);
             }, 100);
         }
@@ -447,7 +447,7 @@ const evaporation = {
      */
     setNewDay () {
         extraTerStr();
-        setTimeout(() => {
+        adapter.setTimeout(() => {
             adapter.setState('evaporation.ETpYesterday', { 
                 val: Math.round(ETpTodayNum * 10000) / 10000, 
                 ack: true 

package/lib/myConfig.js

@@ -138,7 +138,9 @@ const myConfig = {
 
                     /* Abonnieren der Statusänderungen des Objekts (reagieren auf Änderung des 'Ventils' 
                     der einzelnen Bewässerungskreise zur Fehlerkontrolle bzw. Verbrauchsermittlung) */
-                    adapter.subscribeForeignStates(newEntry.control.idACK);
+                    if (newEntry?.control?.idACK !== null) {
+                        adapter.subscribeForeignStates(newEntry.control.idACK);
+                    }
 
                     // @ts-ignore
                     myConfig.config.push(newEntry);

package/lib/sendMessageText.js

@@ -87,7 +87,7 @@ const sendMessageText = {
 
         let sendMessage = message;
 
-        setTimeout(function () {
+        adapter.setTimeout(function () {
             switch (ObjMessage.notificationsType) {
                 case 'Telegram':
                     if (ObjMessage.enabled &&

package/lib/valveControl.js

@@ -1,7 +1,7 @@
 
 'use strict';
 
-const asyncTime = require('timers/promises');
+const asyncTime = require('node:timers/promises');
 // import {setTimeout} from 'timers/promises';
 
 const myConfig = require('./myConfig.js');
@@ -55,6 +55,7 @@ let boostReady = true,
     fillLevelCistern = 0,
     /**
      * Zeitliche Bewässerungseinschränkung EIN/AUS
+     * z.B. Behördenvorgabe, Sommerhitze + Trockenheit, usw.
      */
     timeBasedRestrictionEn = false;
 
@@ -68,6 +69,7 @@ const updateListMarker = {
 /**
  * aktive Pumpendaten
  * - enable: Pumpe ein/ausgeschaltet
+ * - pumpSwitching: Umschaltung aktive, während der Umschaltung von Zysterne auf Hauptpumpe bei aktiver Pumpe
  * - name: Bezeichnung der Pumpe
  * - idState: Objektname des State
  * - id: ID des States unter Objecte im ioBroker info.cisternPump || info.mainPump
@@ -82,7 +84,9 @@ const updateListMarker = {
  */
 
 const currentPumpUse = {
-    enable: false, 
+    enable: false,
+    pumpSwitching: false,
+    pumpReplacement: false,
     name: '', 
     wateringTime: 0, 
     id: '', 
@@ -134,9 +138,37 @@ const controlVoltage = {
         maker: undefined
     }
 };
-
+/**
+ * Sensor Druck
+ * - enable: Sensor vorhanden
+ * - active: true = Sensor aktiv, false = Sensor inaktiv
+ * - setActive(true/false): Funktion zum setzen des Sensorstatus aktiv/inaktiv
+ * - inadequatePressure: true = Nicht ausreichender Druck, false = ausreichender Druck
+ * - name: Bezeichnung Sensor Druck
+ * - value: aktueller Wert des Sensors
+ * - state: aktueller Zustand des Sensors
+ * - ac: AbortController für die Überwachung der Sensoraktivität
+ */
 const sensorPressure = {
-    inadequatePressure: false,  // true = Nicht ausreichender Druck, false = ausreichender Druck
+    enable: false,
+    active: false,
+    setActive: async(val) => {
+        try {
+            sensorPressure.active = val;
+            if (val === true && sensorPressure.enable) {
+                await valveControl.setSensorPressure(sensorPressure.value);
+            } else {
+                if (sensorPressure?.ac !== null) {
+                    await sensorPressure.ac.abort();   // AbortController zurücksetzen
+                    sensorPressure.ac = null;
+                    sensorPressure.inadequatePressure = false;   // Drucksensor deaktiviert -> Druckverhältnisse wieder in Ordnung
+                } 
+            }
+        } catch (error) {
+            adapter.log.error(`Error setting sensor pressure active ${val}: ${error}`);
+        }
+    },
+    inadequatePressure: false,
     name: 'Sensor Pressure', 
     value: 0, 
     state: 0, 
@@ -338,14 +370,14 @@ const delList = async (killList) => {
  */
 const currentConsumption = async (write) => {
     try {
-        let curFlow = currentPumpUse.intBreak ? 0 : currentPumpUse.pumpPower, /* adapter.config.triggerMainPumpPower; */
+        let curFlow = (currentPumpUse.intBreak || sensorPressure.inadequatePressure) ? 0 : currentPumpUse.pumpPower, /* adapter.config.triggerMainPumpPower; */
             /** aktuelle Anzahl der eingeschalteten Ventile */
             parallel = 0,
             pumpRequired = false;
         adapter.log.debug(`currentConsumption curFlow: ${curFlow}, ${currentPumpUse.intBreak} => ${currentPumpUse.intBreak ? 0 : currentPumpUse.pumpPower}`);
-        if (!currentPumpUse.intBreak
-            && !sensorPressure.inadequatePressure
-        ) {
+        //if (!currentPumpUse.intBreak
+        //    && !sensorPressure.inadequatePressure
+        //) {
         // ermitteln von curPipe und der Anzahl der parallelen Stränge
             for (const entry of threadList){
                 if (entry.state === 'wait') pumpRequired = true;   // state => wait
@@ -358,7 +390,7 @@ const currentConsumption = async (write) => {
                     pumpRequired = true;
                 }
             }
-        }
+        //}
         // bei write schreiben der aktuellen Förderleistung der Pumpe und der Anzahl der parallelen Stränge
         if (write || currentPumpUse.intBreak) {
             adapter.setStateAsync('control.parallelOfMax', {
@@ -677,6 +709,7 @@ const updateList = async () => {
                     });
                     await asyncTime.setTimeout(currentPumpUse.leadTime, undefined, undefined);
                 }
+                await sensorPressure.setActive(true);  // Sensor Druck aktivieren, damit die Drucküberwachung startet
             }                   
         } catch (error) {
             adapter.log.error(`Error trigger current Pump [${currentPumpUse.control.idState}]: ${error}`);
@@ -701,7 +734,7 @@ const updateList = async () => {
                         consumption = await currentConsumption(true);
                         clearInterval(entry.countdown); // Zähler für Countdown, Verbrauchsmengen, usw. löschen
                         entry.countdown = null;
-                        adapter.log.info(`Set Valve ID: ${entry.name} Pump delivery rate too low, wait!  curFlow ${consumption.curFlow} parallel: ${consumption.parallel}`);
+                        adapter.log.warn(`Set Valve ID: ${entry.name} Pump delivery rate too low, wait!  curFlow ${consumption.curFlow} parallel: ${consumption.parallel}`);
                         await asyncTime.setTimeout(300, undefined, {signal: entry.ac.acUpdateListPuOff.signal});
                     }                    
                 }else{
@@ -796,6 +829,10 @@ const updateList = async () => {
 
         // Pumpe ausschalten
         if (currentPumpUse.enable === true) {
+            await sensorPressure.setActive(false).catch((error) => {  // Sensor Druck deaktivieren, da keine Bewässerung mehr aktiv ist
+                adapter.log.error(`Error setting sensor pressure active false: ${error}`);
+            });
+            
             try {
                 const _currentPumpUse = await setValve(currentPumpUse, false);
                 if (_currentPumpUse === currentPumpUse.control.idState) {
@@ -806,7 +843,7 @@ const updateList = async () => {
                 }
                 await asyncTime.setTimeout(switchingDistanceMS, undefined, undefined);                
             } catch (error) {
-                adapter.log.error(`Error trigger current Pump [${currentPumpUse.idState}]: ${error}`);
+                adapter.log.error(`Error trigger current Pump [${ currentPumpUse.control.idState }]: ${error}`);
             }
 
             // Druckentlastungsventil ansteuern wenn in Konfiguration aktiv
@@ -923,7 +960,7 @@ const setActualPump = async () => {
                 }
                 /* Info aktualisieren */
                 await adapter.setStateAsync('info.cisternState', {
-                    val: `${ (currentPumpUse.intBreak === true)  ? 'Cistern empty: ' : 'Cistern filled: ' } ${ fillLevelCistern } % (${ adapter.config.triggerMinCisternLevel } %)`,
+                    val: `${ (currentPumpUse.intBreak === true) ? `Cistern empty:  ${ fillLevelCistern } % (${ adapter.config.triggerOnCisternLevel } %)` : `Cistern filled:  ${ fillLevelCistern } % (${ adapter.config.triggerMinCisternLevel } %)` }`,
                     ack: true
                 });
                 break;
@@ -934,6 +971,8 @@ const setActualPump = async () => {
                 /* Bewässerungspumpen aktiv */
                     if ((fillLevelCistern < parseFloat(adapter.config.triggerMinCisternLevel)) && (currentPumpUse.pumpCistern === true)) {
                     /* (Zisterne unter Minimum) && (ZisternenPumpe läuft) */
+                        currentPumpUse.pumpSwitching = true;
+                        sensorPressure.setActive(false);  // Sensor Druck deaktivieren, da die Hauptpumpe ausgeschaltet wird und somit kein Druck mehr in den Leitungen ist
                         const _setValveCisternPumpOff = await setValve(currentPumpUse, false);  // Pumpe Zisterne Aus
                         if (_setValveCisternPumpOff === currentPumpUse.control.idState) {
                             await adapter.setStateAsync(currentPumpUse.id, {      // set State cisternPump === false
@@ -950,7 +989,7 @@ const setActualPump = async () => {
                         currentPumpUse.pumpPower = parseInt(adapter.config.triggerMainPumpPower);
                         /* Hauptpumpe Ein */
                         const _setValveMainPumpOn = await setValve(currentPumpUse, true);   
-                        if (_setValveMainPumpOn === currentPumpUse.idState) {
+                        if (_setValveMainPumpOn === currentPumpUse.control.idState) {
                             await adapter.setStateAsync(currentPumpUse.id, {      // set State cisternPump === false
                                 val: currentPumpUse.enable, 
                                 ack: true
@@ -962,6 +1001,8 @@ const setActualPump = async () => {
                         if(!sendMessageText.onlySendError()){
                             sendMessageText.sendMessage('Pump change (cistern empty) Cistern pump off => main pump on');
                         }
+                        currentPumpUse.pumpSwitching = false;
+                        sensorPressure.setActive(true);   // Sensor Druck aktivieren, da die Hauptpumpe eingeschaltet wird und somit wieder Druck in den Leitungen ist
                         updateList();   // Wasserverbrauch an Pumpenleistung anpassen
                     }
                 } else {
@@ -996,7 +1037,7 @@ const setActualPump = async () => {
                 }
                 /* Info aktualisieren */
                 await adapter.setStateAsync('info.cisternState', {
-                    val: `${ (currentPumpUse.pumpCistern === false)  ? 'Cistern empty: ' : 'Cistern filled: ' } ${ fillLevelCistern } % (${ adapter.config.triggerMinCisternLevel } %)`,
+                    val: `${ (currentPumpUse.pumpCistern === false) ? `Cistern empty:  ${ fillLevelCistern } % (${ adapter.config.triggerOnCisternLevel } %)` : `Cistern filled:  ${ fillLevelCistern } % (${ adapter.config.triggerMinCisternLevel } %)` }`,
                     ack: true
                 });
                 break;
@@ -1406,13 +1447,12 @@ const valveControl = {
             ) {
                 const _sensorPressure = await adapter.getForeignStateAsync(adapter.config.sensorPressure);
                 if (_sensorPressure) {
+                    sensorPressure.enable = true;
+                    sensorPressure.active = false;
                     adapter.subscribeForeignStates(adapter.config.sensorPressure);
                     const _waterPressure = await adapter.getObjectAsync(`info.waterPressure`);
                     if (_waterPressure) {
-                        await adapter.setStateAsync(`info.waterPressure`, {
-                            val: `${ _sensorPressure.val }`,
-                            ack: true
-                        });
+                        sensorPressure.value = _sensorPressure.val;
                     } else {
                         await adapter.setObjectNotExistsAsync(`info.waterPressure`, {
                             type: 'state',
@@ -1440,15 +1480,16 @@ const valveControl = {
                             },
                             native: {},
                         });
-                        await adapter.setStateAsync(`info.waterPressure`, {
-                            val: `${ _sensorPressure.val }`,
-                            ack: true
-                        });
                     }
+                    await adapter.setStateAsync(`info.waterPressure`, {
+                        val: `Initial ( ${ sensorPressure.value } bar )`,
+                        ack: true
+                    });
                 } else {
                     adapter.log.warn(`The configured pressure sensor "${ adapter.config.sensorPressure }" could not be found. Please check the configuration of the pressure sensor!`);
                 }
             } else {
+                // Wenn kein Drucksensor konfiguriert ist, wird das Objekt info.waterPressure gelöscht, damit keine falschen Werte angezeigt werden
                 const _waterPressure = await adapter.getObjectAsync(`info.waterPressure`);
                 if (_waterPressure) await adapter.delObjectAsync(`info.waterPressure`);
             }
@@ -1794,48 +1835,54 @@ const valveControl = {
     setSensorPressure: async function (pressure) {
         let alteredPressure = false;    // Veränderter Druck => updateList starten um Verbrauch anzupassen / Ventile ausschalten
         let reviews = '';
+
         try {
             sensorPressure.value = parseFloat(pressure).toFixed(1);
-            if (currentPumpUse.enable === true && adapter.config.minimumPressure > pressure) {
+            if (sensorPressure.active === true && adapter.config.minimumPressure > pressure) {
                 if (sensorPressure.ac === null) {
                     sensorPressure.ac = new AbortController();
                     await asyncTime.setTimeout(60000, undefined, { signal: sensorPressure.ac.signal });  // max. 60s warten und Drucksensorwert erneut prüfen, bevor die Pumpe ausgeschaltet wird
                     const _currentPressure = await adapter.getForeignStateAsync(adapter.config.sensorPressure);
-                    if (_currentPressure?.val
-                        && currentPumpUse.enable === true
-                        && adapter.config.minimumPressure > parseFloat(_currentPressure.val)
-                    ) {
-                        reviews = 'Not Okay'
-                        if (sensorPressure.inadequatePressure === false) {
-                            alteredPressure = true;
-                            sensorPressure.inadequatePressure = true;
+                    if (_currentPressure?.val){
+                        if(typeof _currentPressure.val === 'number') {
+                            sensorPressure.value = parseFloat(_currentPressure.val).toFixed(1);
+                        }else if(typeof _currentPressure.val === 'string') {
+                            sensorPressure.value = parseFloat(_currentPressure.val).toFixed(1);
+                        }else if(typeof _currentPressure.val === 'boolean') {
+                            (_currentPressure.val === true) ? sensorPressure.value = 100 : sensorPressure.value = 0;
+                        }else{
+                            throw new Error(`setSensorPressure => Wrong value: ${ _currentPressure.val }, Type: ${ typeof _currentPressure.val }`);
                         }
-                        sensorPressure.value = parseFloat(_currentPressure.val).toFixed(1);
-                        adapter.log.warn(`Pressure sensor value ${ pressure } bar is below the minimum pressure ${ adapter.config.minimumPressure } bar. The pump will be turned off to prevent damage. Please check the pressure sensor and the configuration of the minimum pressure!`);
-                        if (adapter.config.notificationEnabled) {
-                            sendMessageText.sendMessage(`Pressure sensor value ${ pressure } bar is below the minimum pressure ${ adapter.config.minimumPressure } bar. The pump will be turned off to prevent damage. Please check the pressure sensor and the configuration of the minimum pressure!`);
+                        if (sensorPressure.active === true
+                            && adapter.config.minimumPressure > sensorPressure.value
+                        ) {
+                            reviews = 'Not Okay'
+                            if (sensorPressure.inadequatePressure === false) {
+                                alteredPressure = true;
+                                sensorPressure.inadequatePressure = true;
+                            }
+                            adapter.log.warn(`Pressure sensor value ${ sensorPressure.value } bar is below the minimum pressure ${ adapter.config.minimumPressure } bar. The pump will be turned off to prevent damage. Please check the pressure sensor and the configuration of the minimum pressure!`);
+                            if (adapter.config.notificationEnabled) {
+                                sendMessageText.sendMessage(`Pressure sensor value ${ sensorPressure.value } bar is below the minimum pressure ${ adapter.config.minimumPressure } bar. The pump will be turned off to prevent damage. Please check the pressure sensor and the configuration of the minimum pressure!`);
+                            }
+                        } else {
+                            reviews = 'Okay';
                         }
-                        sensorPressure.ac.abort();   // setTimeout abbrechen, da die Pumpe bereits ausgeschaltet wird
-                        sensorPressure.ac = null;    // AbortController zurücksetzen
-                    } else if (_currentPressure?.val) {
-                        reviews = 'Okay';
                     }
                     sensorPressure.ac = null;    // AbortController zurücksetzen
                 } else {
-                    reviews = 'I don\'t know';
+                    reviews = 'I don\'t know';  // Ich weiß nicht
                 }
-            } else if (currentPumpUse.enable === false || adapter.config.minimumPressure <= pressure) {
+            } else {
                 reviews = 'Okay'
                 if (sensorPressure?.ac !== null) {
                     await sensorPressure.ac.abort();   // AbortController zurücksetzen
                     sensorPressure.ac = null;
                 }   
-            } else {
-                reviews = 'Okay'
             }
         } catch (error) {
             if (error.name === 'AbortError') {
-                adapter.log.debug(`setSensorPressure(${pressure}): The shutdown process was aborted because the operating pressure was restored.`);
+                adapter.log.debug(`setSensorPressure(${ sensorPressure.value}): The shutdown process was aborted because the operating pressure was restored.`);
                 if (sensorPressure?.ac !== null) {
                     sensorPressure.ac.abort();   // AbortController zurücksetzen
                     sensorPressure.ac = null;
@@ -1845,7 +1892,7 @@ const valveControl = {
             await adapter.setStateAsync(`info.waterPressure`, {
                 val: `${ reviews } ( ${ sensorPressure.value } bar )`,
                 ack: true
-            });           
+            });          
             if (alteredPressure) updateList();
         }
     }