iobroker.sprinklecontrol 1.0.2 → 1.0.4

package/README.md

@@ -33,6 +33,12 @@ Wetterabhängige automatische Steuerung der Gartenbewässerung
   Placeholder for the next version (at the beginning of the line):
   ### **WORK IN PROGRESS**
 -->
+### 1.0.4 (2026-04-26)
+* (Dirk-Peter-md) GitHub error message #274
+
+### 1.0.3 (2026-04-25)
+* (Dirk-Peter-md) Pressure relief valve added after irrigation.
+
 ### 1.0.2 (2026-04-19)
 * (Dirk-Peter-md) Added times for the irrigation ban
 
@@ -48,12 +54,6 @@ Wetterabhängige automatische Steuerung der Gartenbewässerung
 * (Dirk-Peter-md) dependencies updated
 * (Dirk-Peter-md) update dependabot
 
-### 0.2.19 (2025-07-02)
-* (Dirk-Peter-md) The switch-on hysteresis of the cistern is now stored in the configuration.
-
-### 0.2.18 (2025-06-30)
-* (Dirk-Peter-md) Hysteresis switch-on value of the cistern changed to 20%
-
 ## License
 MIT License
 

package/admin/i18n/de/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Objekt-ID-Sprinkler",
     "Ok": "OK",
     "Precipitation threshold in mm": "Niederschlags-Schwellwert in mm",
+    "Pressure relief in the lines before shutdown": "Druckentlastung der Leitungen vor der Abschaltung",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Druckentlastung! Schaltet nach dem Abschalten der Pumpe den größten Wasserverbraucher für 10 Sekunden ein.",
     "Pump Settings": "Pumpeneinstellungen",
     "Pump selection": "Pumpenauswahl",
     "Pump settings": "Pumpeneinstellungen",

package/admin/i18n/en/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Object-ID sprinkler",
     "Ok": "Ok",
     "Precipitation threshold in mm": "Precipitation threshold in mm",
+    "Pressure relief in the lines before shutdown": "Pressure relief in the lines before shutdown",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.",
     "Pump Settings": "Pump Settings",
     "Pump selection": "Pump selection",
     "Pump settings": "Pump settings",

package/admin/i18n/es/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Aspersor de ID de objeto",
     "Ok": "Okay",
     "Precipitation threshold in mm": "Umbral de precipitación en mm",
+    "Pressure relief in the lines before shutdown": "Alivio de presión en las líneas antes de la parada.",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "¡Alivio de presión! Enciende el mayor consumidor de agua durante 10 segundos después de apagar la bomba.",
     "Pump Settings": "Configuraciones de bomba",
     "Pump selection": "Selección de bombas",
     "Pump settings": "Ajustes de la bomba",

package/admin/i18n/fr/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Arroseur ID objet",
     "Ok": "D'accord",
     "Precipitation threshold in mm": "Seuil de précipitation en mm",
+    "Pressure relief in the lines before shutdown": "Décompression dans les conduites avant l'arrêt",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Soulagement de la pression ! Allume le plus gros consommateur d'eau pendant 10 secondes après l'arrêt de la pompe.",
     "Pump Settings": "Paramètres de la pompe",
     "Pump selection": "Choix de la pompe",
     "Pump settings": "Paramètres de la pompe",

package/admin/i18n/it/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Irrigatore ID oggetto",
     "Ok": "Ok",
     "Precipitation threshold in mm": "Soglia di precipitazione in mm",
+    "Pressure relief in the lines before shutdown": "Depressurizzazione nelle linee prima dell'arresto",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Alleviamento della pressione! Accende l'utenza d'acqua più grande per 10 secondi dopo lo spegnimento della pompa.",
     "Pump Settings": "Impostazioni della pompa",
     "Pump selection": "Selezione pompa",
     "Pump settings": "Impostazioni della pompa",

package/admin/i18n/nl/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Object-ID sproeier",
     "Ok": "OK",
     "Precipitation threshold in mm": "Neerslagdrempel in mm",
+    "Pressure relief in the lines before shutdown": "Drukontlasting in de leidingen vóór uitschakeling",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Drukverlichting! Schakelt de grootste waterverbruiker gedurende 10 seconden in nadat de pomp is uitgeschakeld.",
     "Pump Settings": "Pompinstellingen",
     "Pump selection": "Pomp selectie",
     "Pump settings": "Pomp instellingen",

package/admin/i18n/pl/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Zraszacz ID obiektów",
     "Ok": "Dobrze",
     "Precipitation threshold in mm": "Próg opadów w mm",
+    "Pressure relief in the lines before shutdown": "Redukcja ciśnienia w przewodach przed wyłączeniem",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Redukcja ciśnienia! Włącza największy odbiornik wody na 10 sekund po wyłączeniu pompy.",
     "Pump Settings": "Ustawienia pompy",
     "Pump selection": "Wybór Pumpa",
     "Pump settings": "Ustawienia pompy",

package/admin/i18n/pt/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Aspersor de identificação de objeto",
     "Ok": "Está bem",
     "Precipitation threshold in mm": "Limiar de precipitação em mm",
+    "Pressure relief in the lines before shutdown": "Alívio de pressão nas linhas antes do desligamento",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Alívio de pressão! Liga o maior consumidor de água durante 10 segundos após a bomba ter sido desligada.",
     "Pump Settings": "Configurações da bomba",
     "Pump selection": "Seleção de bomba",
     "Pump settings": "Configurações da bomba",

package/admin/i18n/ru/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Спринклер с идентификатором объекта",
     "Ok": "Хорошо",
     "Precipitation threshold in mm": "Порог осадков в мм",
+    "Pressure relief in the lines before shutdown": "Сброс давления в линиях перед остановом",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Сброс давления! Включает самый большой водопотребитель на 10 секунд после выключения насоса.",
     "Pump Settings": "Настройки насоса",
     "Pump selection": "Выбор насоса",
     "Pump settings": "Настройки насоса",

package/admin/i18n/uk/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "Спринклер Object-ID",
     "Ok": "добре",
     "Precipitation threshold in mm": "Поріг опадів в мм",
+    "Pressure relief in the lines before shutdown": "Скидання тиску в лініях перед відключенням",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "Зняття тиску! Вмикає найбільшого споживача води на 10 секунд після вимкнення насоса.",
     "Pump Settings": "Налаштування насоса",
     "Pump selection": "Вибір насоса",
     "Pump settings": "Налаштування насоса",

package/admin/i18n/zh-cn/translations.json

@@ -52,6 +52,8 @@
     "Object-ID sprinkler": "对象ID洒水器",
     "Ok": "好",
     "Precipitation threshold in mm": "以毫米为单位的降水阈值",
+    "Pressure relief in the lines before shutdown": "停机前管线压力释放",
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": "压力缓解！泵关闭后，打开最大耗水量 10 秒。",
     "Pump Settings": "泵设定",
     "Pump selection": "倾销选择",
     "Pump settings": "泵设定",

package/admin/index_m.html

@@ -635,6 +635,21 @@
                                 </div>
                             </li>
 
+                            <!-- Einstellung des Schaltverhaltens -->
+                            <li>
+                                <div class="collapsible-header">
+                                    <i class="material-icons">expand_more</i><h6 class="translate">Pressure relief in the lines before shutdown</h6>
+                                </div>
+                                <div class="collapsible-body">
+                                    <div class="row s12 m6 l2">
+                                        <div class="input-field col s12 m6 l2">
+                                            <input class="value" id="pressureRelief" type="checkbox"/>
+                                            <span for="pressureRelief" class="translate">Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.</span>
+                                        </div>
+                                    </div>
+                                </div>
+                            </li>
+
                             <!-- aktuelle Wetterdaten -->
                             <li>
                                 <div class="collapsible-header">

package/admin/index_m.js

@@ -493,6 +493,7 @@ function showHideSettings() {
      * @type {boolean}
      */
     let selAddStartTime = false;
+    let mWeatherForecast = false;
 
     // Zeiteinstellungen => Feiertagseinstellung sichtbar bei combobox
     $('#wateringStartTime').on('change', function () {
@@ -587,14 +588,17 @@ function showHideSettings() {
     // individuelle Wettervorhersage
     $('#weatherForecastService').on('change', function () {
         if ($(this).val() === 'noWeatherData') {
+            mWeatherForecast = false;
             $('.showOwnDataPoint').hide();
             $('.showDasWetter').hide();
             $('.showThresholdRain').hide();
         } else if ($(this).val() === 'ownDataPoint') {
+            mWeatherForecast = true;
             $('.showOwnDataPoint').show();
             $('.showDasWetter').hide();
             $('.showThresholdRain').show();
         } else if ($(this).val() === 'dasWetter') {
+            mWeatherForecast = true;
             $('.showOwnDataPoint').hide();
             $('.showDasWetter').show();
             $('.showThresholdRain').show();

package/admin/words.js

@@ -61,6 +61,8 @@ systemDictionary = {
     "Object-ID sprinkler": {                          "en": "Object-ID sprinkler",                              "de": "Objekt-ID-Sprinkler",                              "ru": "Спринклер с идентификатором объекта",              "pt": "Aspersor de identificação de objeto",              "nl": "Object-ID sproeier",                               "fr": "Arroseur ID objet",                                "it": "Irrigatore ID oggetto",                            "es": "Aspersor de ID de objeto",                         "pl": "Zraszacz ID obiektów",                             "uk": "Спринклер Object-ID",                              "zh-cn": "对象ID洒水器"},
     "Ok": {                                           "en": "Ok",                                               "de": "OK",                                               "ru": "Хорошо",                                           "pt": "Está bem",                                         "nl": "OK",                                               "fr": "D'accord",                                         "it": "Ok",                                               "es": "Okay",                                             "pl": "Dobrze",                                           "uk": "добре",                                            "zh-cn": "好"},
     "Precipitation threshold in mm": {                "en": "Precipitation threshold in mm",                    "de": "Niederschlags-Schwellwert in mm",                  "ru": "Порог осадков в мм",                               "pt": "Limiar de precipitação em mm",                     "nl": "Neerslagdrempel in mm",                            "fr": "Seuil de précipitation en mm",                     "it": "Soglia di precipitazione in mm",                   "es": "Umbral de precipitación en mm",                    "pl": "Próg opadów w mm",                                 "uk": "Поріг опадів в мм",                                "zh-cn": "以毫米为单位的降水阈值"},
+    "Pressure relief in the lines before shutdown": { "en": "Pressure relief in the lines before shutdown",     "de": "Druckentlastung der Leitungen vor der Abschaltung", "ru": "Сброс давления в линиях перед остановом",          "pt": "Alívio de pressão nas linhas antes do desligamento", "nl": "Drukontlasting in de leidingen vóór uitschakeling", "fr": "Décompression dans les conduites avant l'arrêt",   "it": "Depressurizzazione nelle linee prima dell'arresto", "es": "Alivio de presión en las líneas antes de la parada.", "pl": "Redukcja ciśnienia w przewodach przed wyłączeniem", "uk": "Скидання тиску в лініях перед відключенням",       "zh-cn": "停机前管线压力释放"},
+    "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.": {"en": "Pressure relief! Switches on the largest water consumer for 10 seconds after the pump has been switched off.", "de": "Druckentlastung! Schaltet nach dem Abschalten der Pumpe den größten Wasserverbraucher für 10 Sekunden ein.", "ru": "Сброс давления! Включает самый большой водопотребитель на 10 секунд после выключения насоса.", "pt": "Alívio de pressão! Liga o maior consumidor de água durante 10 segundos após a bomba ter sido desligada.", "nl": "Drukverlichting! Schakelt de grootste waterverbruiker gedurende 10 seconden in nadat de pomp is uitgeschakeld.", "fr": "Soulagement de la pression ! Allume le plus gros consommateur d'eau pendant 10 secondes après l'arrêt de la pompe.", "it": "Alleviamento della pressione! Accende l'utenza d'acqua più grande per 10 secondi dopo lo spegnimento della pompa.", "es": "¡Alivio de presión! Enciende el mayor consumidor de agua durante 10 segundos después de apagar la bomba.", "pl": "Redukcja ciśnienia! Włącza największy odbiornik wody na 10 sekund po wyłączeniu pompy.", "uk": "Зняття тиску! Вмикає найбільшого споживача води на 10 секунд після вимкнення насоса.", "zh-cn": "压力缓解！泵关闭后，打开最大耗水量 10 秒。"},
     "Pump Settings": {                                "en": "Pump Settings",                                    "de": "Pumpeneinstellungen",                              "ru": "Настройки насоса",                                 "pt": "Configurações da bomba",                           "nl": "Pompinstellingen",                                 "fr": "Paramètres de la pompe",                           "it": "Impostazioni della pompa",                         "es": "Configuraciones de bomba",                         "pl": "Ustawienia pompy",                                 "uk": "Налаштування насоса",                              "zh-cn": "泵设定"},
     "Pump selection": {                               "en": "Pump selection",                                   "de": "Pumpenauswahl",                                    "ru": "Выбор насоса",                                     "pt": "Seleção de bomba",                                 "nl": "Pomp selectie",                                    "fr": "Choix de la pompe",                                "it": "Selezione pompa",                                  "es": "Selección de bombas",                              "pl": "Wybór Pumpa",                                      "uk": "Вибір насоса",                                     "zh-cn": "倾销选择"},
     "Pump settings": {                                "en": "Pump settings",                                    "de": "Pumpeneinstellungen",                              "ru": "Настройки насоса",                                 "pt": "Configurações da bomba",                           "nl": "Pomp instellingen",                                "fr": "Paramètres de la pompe",                           "it": "Impostazioni della pompa",                         "es": "Ajustes de la bomba",                              "pl": "Ustawienia pompy",                                 "uk": "Налаштування насоса",                              "zh-cn": "泵设定"},

package/io-package.json

@@ -1,7 +1,7 @@
 {
   "common": {
     "name": "sprinklecontrol",
-    "version": "1.0.2",
+    "version": "1.0.4",
     "titleLang": {
       "en": "Sprinkler Control",
       "de": "Sprinklersteuerung",
@@ -19,6 +19,32 @@
       "Dirk Peter <dirk.peter@freenet.de>"
     ],
     "news": {
+      "1.0.4": {
+        "en": "GitHub error message #274",
+        "de": "GitHub Fehlermeldung #274",
+        "ru": "Сообщение об ошибке GitHub #274",
+        "pt": "Mensagem de erro do GitHub # 274",
+        "nl": "GitHub foutmelding #274",
+        "fr": "Message d'erreur GitHub #274",
+        "it": "Messaggio di errore GitHub #274",
+        "es": "Mensaje de error GitHub #274",
+        "pl": "Komunikat błędu GitHub # 274",
+        "uk": "Повідомлення про помилку GitHub #274",
+        "zh-cn": "GitHub 错误消息 # 274"
+      },
+      "1.0.3": {
+        "en": "Pressure relief valve added after irrigation.",
+        "de": "Druckentlastungsventil nach Bewässerung hinzugefügt.",
+        "ru": "Клапан сброса давления добавляют после орошения.",
+        "pt": "Válvula de alívio de pressão adicionada após irrigação.",
+        "nl": "Overdrukklep toegevoegd na irrigatie.",
+        "fr": "Vanne de décompression ajoutée après irrigation.",
+        "it": "Valvola di pressione aggiunta dopo l'irrigazione.",
+        "es": "Válvula de alivio de presión añadido después del riego.",
+        "pl": "Ciśnienie zaworu nadmiarowego dodane po nawadnianiu.",
+        "uk": "Клапан для зняття тиску додається після поливу.",
+        "zh-cn": "灌溉后增加了减压阀."
+      },
       "1.0.2": {
         "en": "Added times for the irrigation ban",
         "de": "Zusätzliche Zeiten für das Bewässerungsverbot",
@@ -83,32 +109,6 @@
         "pl": "Zmiana wartości hysterezy cysterny na 20%",
         "uk": "Гістерез змінився на 20%",
         "zh-cn": "贮器的开关值改为20%"
-      },
-      "0.2.17": {
-        "en": "Valve timing corrected",
-        "de": "Ventilzeit korrigiert",
-        "ru": "Время клапана скорректировано",
-        "pt": "Regulação da válvula",
-        "nl": "Gecorrigeerde kleptijd",
-        "fr": "Réglage de la vanne",
-        "it": "Valvola tempistica corretta",
-        "es": "Tiempo de válvula corregido",
-        "pl": "Skorygowany czas zaworu",
-        "uk": "Терміни клапана, виправлені",
-        "zh-cn": "阀门时间得到纠正"
-      },
-      "0.2.16": {
-        "en": "issue #95 Pump lead time added",
-        "de": "ausgabe #95 Pumpe Lieferzeit hinzugefügt",
-        "ru": "#95 Время работы насоса добавлено",
-        "pt": "número de edição #95 Tempo de lançamento da bomba adicionado",
-        "nl": "nummer #95 Pump doorlooptijd toegevoegd",
-        "fr": "numéro 95 Temps d'avance de la pompe ajouté",
-        "it": "numero #95 Pump lead time aggiunto",
-        "es": "#95 Tiempo de inicio de bomba añadido",
-        "pl": "wydanie # 95 Dodany czas ołowiu pompy",
-        "uk": "problem #95 Насос додано час",
-        "zh-cn": "增加了泵前准备时间"
       }
     },
     "desc": {
@@ -170,6 +170,7 @@
     "triggerControlVoltage": "",
     "maximumParallelValves": "5",
     "switchingDistance": "0.5",
+    "pressureRelief": false,
     "pumpSelection": "mainPump",
     "triggerMainPump": "hm-rpc.0.MEQ1234567.1.STATE",
     "triggerMainPumpPower": "2000",
@@ -201,12 +202,12 @@
     "sensorWindSpeed": "",
     "sensorBrightness": "",
     "sensorRainfall": "",
-    "switchingBehavior": "standard",
-    "weatherForecastService": "dasWetter",
+    "switchingBehavior": "noResponse",
+    "weatherForecastService": "noWeatherData",
     "weatherForInstance": "",
     "pathRainForecast": "",
     "thresholdRain": "2",
-    "notificationsType": "Telegram",
+    "notificationsType": "noNotification",
     "telegramInstance": "",
     "telegramNoticeType": "longTelegramNotice",
     "telegramUser": "",

package/lib/tools.js

@@ -1,5 +1,17 @@
 'use strict';
-
+/**
+ * tools.js
+ * Hier werden allgemeine Funktionen bereitgestellt, die in verschiedenen Modulen des Bewässerungsplaners verwendet werden können.
+ * Diese Funktionen umfassen:
+ * - laterThanTime: Überprüft, ob eine angegebene Zeit in der Zukunft liegt.
+ * - trend: Berechnet einen Zwischenwert basierend auf zwei bekannten Punkten.
+ * - findAsync: Eine asynchrone Version der Array.find-Methode, die mit Promises arbeitet.
+ * - idStateControl: Ermittelt die ID-Adresse für State, ON_TIME, WORKING, PROCESS eines Homematic-Schaltaktors basierend auf der ID des Geräts und dem konfigurierten Schaltverhalten.
+ * - formatTime: Formatiert einen Zeitstempel in ein bestimmtes Format und gibt zusätzliche Informationen wie die Kalenderwoche und den Wochentag zurück.
+ * - addTime: Addiert zwei Zeitwerte, die entweder im Format "HH:MM:SS" oder als Sekunden angegeben werden können, und gibt das Ergebnis im gleichen Format zurück.
+ *
+ * Diese Funktionen sind so gestaltet, dass sie flexibel und wiederverwendbar sind, um die Entwicklung des Bewässerungsplaners zu erleichtern.
+ */
 const tools = {
     /**
      * laterThanTime Funktion
@@ -82,7 +94,7 @@ const tools = {
                     idON_TIME: null,
                     idACK: id,
                     maker: "standard"
-                };   
+                };
             }
 
             case "homematic": {

package/lib/valveControl.js

@@ -19,6 +19,12 @@ let adapter;
  */
 const threadList = [];
 
+/**
+ * Ventil mit dem größten Durchfluss (pipeFlow) für die Steuerung des Druckentlastungsventils
+ * - wird in der Funktion updateList() ermittelt
+ */
+const pressureReliefValve = {enable: false, name: '',wateringTime: 10, ac: {}, controller: {}, control: {idState: undefined, idON_TIME: undefined, idACK: undefined, maker: undefined}};
+
 /**
  *  - bereit zum Boost (true: kein Boostventil aktive; false: BoostVentil aktive)
  */
@@ -69,7 +75,7 @@ let cisternPumpControl = {idState: undefined, idON_TIME: undefined, idACK: undef
  * - idState: Aktorerkennung "hm-rpc.0.MEQ1810129.1.STATE"
  * - controller: controlle von Zeiten und Abbruchsignalen
  */
-const controlVoltage ={enable: false, name: '24V',wateringTime: 0, ac: {}, controller: {}, control: {idState: undefined, idON_TIME: undefined, idACK: undefined, maker: undefined}};
+const controlVoltage = {enable: false, name: '24V',wateringTime: 0, ac: {}, controller: {}, control: {idState: undefined, idON_TIME: undefined, idACK: undefined, maker: undefined}};
 
 /**
  *  Schaltabstand in ms
@@ -514,6 +520,23 @@ const updateList = async () => {
         ? true 
         : false;
 
+    /**
+     * Druckentlastungsventil Steuerung
+     * - Wenn die Bewässerung beendet wird, soll der Druck in den Leitungen durch kurzes Öffnen eines Druckentlastungsventils abgebaut werden, 
+     * um die Lebensdauer des Systems zu erhöhen. Hierzu wird das Ventil mit dem Größten Durchfluss (pipeFlow) für 10 Sekunden angesteuert.
+     */
+    function findPressureReliefValve() {
+        return myConfig.config.reduce((max, item) => {
+                return (item.extBreak === false
+                    && item.autoOn === true
+                    && max.pipeFlow > item.pipeFlow
+                    ) ? max : item;                    
+            }, myConfig.config[0]
+        );
+    }
+    // Implementation for pressure relief valve control
+
+
     consumption = await currentConsumption(true);
     if (consumption.pumpRequired === true) {    // Pumpe erforderlich
 
@@ -686,6 +709,28 @@ const updateList = async () => {
             }            
         }
 
+        if (adapter.config.pressureRelief === true          // Druckentlastungsventil aktiviert
+            && adapter.config.pumpSelection !== 'noPump'    // && Pumpe vorhanden
+        ) {
+            try {
+                const empty = await findPressureReliefValve();
+                if (empty) {
+                    pressureReliefValve.name = empty.objectName;
+                    pressureReliefValve.wateringTime = 10;
+                    pressureReliefValve.pipeFlow = empty.pipeFlow;
+                    pressureReliefValve.enable = false;
+                    pressureReliefValve.control = empty.control;
+                    adapter.log.info(`Pressure relief valve: ${pressureReliefValve.name} with pipeFlow ${pressureReliefValve.pipeFlow} l/h for 10s opened!`);
+                    await setValve(pressureReliefValve, true);
+                    await asyncTime.setTimeout(1000 * pressureReliefValve.wateringTime, undefined, undefined);
+                    await setValve(pressureReliefValve, false);
+                    await asyncTime.setTimeout(switchingDistanceMS, undefined, undefined);
+                }
+            } catch (error) {
+                adapter.log.error(`Error trigger pressure relief valve: ${error}`);
+            }
+        }
+
         // Spannungsversorgung (24V) ausschalten
         if(controlVoltage.enable === true) {
             try {
@@ -1472,8 +1517,8 @@ const valveControl = {
      */
     clearEntireList: async function () {
         try {
-            await setValve(controlVoltage, false);
-            await setValve(currentPumpUse, false);
+            if (controlVoltage?.control?.idState) await setValve(controlVoltage, false);
+            if (currentPumpUse?.control?.idState) await setValve(currentPumpUse, false);
             // let bValveFound = false;	// Ventil gefunden
             for (let counter = threadList.length - 1;	// Loop über das Array
                 counter >= 0;
@@ -1562,5 +1607,6 @@ module.exports = {
     valveControl,
     controlVoltage,
     currentPumpUse,
-    threadList
+    threadList,
+    pressureReliefValve
 };

package/main.js

@@ -9,14 +9,15 @@ const schedule = require('node-schedule');
 const SunCalc = require('suncalc');
 
 // Load your modules here, e.g.:
-const sendMessageText = require('./lib/sendMessageText.js');            // sendMessageText
-const valveControl = require('./lib/valveControl.js').valveControl;     // Steuerung der einzelnen Ventile
-const controlVoltage = require('./lib/valveControl.js').controlVoltage; // state der Steuerspannung
-const currentPumpUse = require('./lib/valveControl.js').currentPumpUse; // state der Pumpen
-const threadList = require('./lib/valveControl.js').threadList;         // Auflistung aller aktiver Sprenger-Kreise
-const myConfig = require('./lib/myConfig.js');                          // myConfig → Speichern und abrufen von Konfigurationsdaten der Ventile
-const evaporation = require('./lib/evaporation.js');                    // Berechnung der Verdunstung, Ermittlung der täglichen Höchsttemperatur, Speicherung der aktuellen Werte von Temperatur, Luftfeuchtigkeit, Helligkeit, Windgeschwindigkeit und Regenmenge
-const tools = require('./lib/tools.js').tools;                          // tools => laden von Hilfsfunktionen
+const sendMessageText = require('./lib/sendMessageText.js');                        // sendMessageText
+const valveControl = require('./lib/valveControl.js').valveControl;                 // Steuerung der einzelnen Ventile
+const controlVoltage = require('./lib/valveControl.js').controlVoltage;             // state der Steuerspannung
+const currentPumpUse = require('./lib/valveControl.js').currentPumpUse;             // state der Pumpen
+const threadList = require('./lib/valveControl.js').threadList;                     // Auflistung aller aktiver Sprenger-Kreise
+const pressureReliefValve = require('./lib/valveControl.js').pressureReliefValve;   // state des Druckentlastungsventil
+const myConfig = require('./lib/myConfig.js');                                      // myConfig → Speichern und abrufen von Konfigurationsdaten der Ventile
+const evaporation = require('./lib/evaporation.js');                                // Berechnung der Verdunstung, Ermittlung der täglichen Höchsttemperatur, Speicherung der aktuellen Werte von Temperatur, Luftfeuchtigkeit, Helligkeit, Windgeschwindigkeit und Regenmenge
+const tools = require('./lib/tools.js').tools;                                      // tools => laden von Hilfsfunktionen
 
 /**
  * The adapter instance
@@ -331,6 +332,10 @@ function startAdapter(options) {
                             found.controller.ackTrue(state);
                         }
                     }
+                    // Druckentlastungsventil
+                    if (id === pressureReliefValve.control.idACK && typeof pressureReliefValve.controller.ackTrue === 'function') {
+                        pressureReliefValve.controller.ackTrue(state);
+                    }
                     // 24V Steuerspannung
                     if (id === controlVoltage.control.idACK && typeof controlVoltage.controller.ackTrue === 'function') {
                         controlVoltage.controller.ackTrue(state);
@@ -2187,10 +2192,8 @@ async function main() {
         weatherForecastTodayPfadStr = `${ adapter.config.weatherForInstance }.location_1.ForecastDaily.Day_1.Rain`;
         adapter.subscribeForeignStates(weatherForecastTodayPfadStr);
         adapter.subscribeForeignStates(`${ adapter.config.weatherForInstance }.location_1.ForecastDaily.Day_2.Rain`);
-    } else {
-        adapter.log.warn('There is no valid data record stored in the weather forecast, please correct it!');
     }
-    
+
     // Request a notification from a third-party adapter => Fordern Sie eine Benachrichtigung von einem Drittanbieter-Adapter an
     if (adapter.config.publicHolidays === true && (`${ adapter.config.publicHolInstance }.heute.*`)) {
         adapter.subscribeForeignStates(`${ adapter.config.publicHolInstance }.heute.*`);

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "iobroker.sprinklecontrol",
-  "version": "1.0.2",
+  "version": "1.0.4",
   "description": "Control of several sprinklers depending on weather conditions and pump performance.",
   "author": {
     "name": "Dirk Peter",