iobroker.sonoff 5.1.0 → 5.1.1

package/README.md

@@ -194,6 +194,9 @@ The device card shows the connection and the Wi-Fi signal (`Wifi_Signal` in dBm)
 	### **WORK IN PROGRESS**
 -->
 ## Changelog
+### 5.1.1 (2026-10-13)
+* (@GermanBluefox) Admin 7.6.20+ is required. Added missing translations. The tests run on Windows and macOS too
+
 ### 5.1.0 (2026-10-13)
 * (@GermanBluefox) Device manager: firmware update of Tasmota devices. The latest release is read from GitHub once a day (option "Check for firmware updates"), devices with an older firmware show the update indicator. The update is started with `Upgrade 1`, so the device downloads the firmware from its own OTA URL
 * (@GermanBluefox) Device manager: search for Tasmota devices in the network and connect them with ioBroker (enables MQTT and writes server, port, user and password)
@@ -214,26 +217,6 @@ The device card shows the connection and the Wi-Fi signal (`Wifi_Signal` in dBm)
 ### 4.2.0 (2026-09-07)
 * (@patricknitsch) Added Device Manager for existing devices
 
-### 4.0.0 (2026-08-13)
-* (ioBroker-Bot) Adapter requires js-controller >= 6.0.11 now.
-* (stony2k) Added bridge mode to connect to an external MQTT broker instead of running a built-in broker
-* (stony2k) Fixed the alive state object not being created (warning "has no existing object")
-* (@GermanBluefox/GreatSUN) Fixed the names of data points inside a group: since 3.3.0 e.g. `SML_Total_in` was created as `SML_in` (#489)
-* (@GermanBluefox/baetzst) The MAC address and the other network and firmware information of a device are stored as data points (`INFO.Mac`, `INFO.Gateway`, `INFO.Hardware`, ...) (#513)
-* (@GermanBluefox) Server mode: the adapter requests `Status 5` and `Status 2` from a device with its first message, so the INFO states are filled even if the device did not reboot
-* (@GermanBluefox) The states which were created with a shortened name by 3.3.x are listed in the log on start, so they can be deleted (#489)
-* (@GermanBluefox) Bridge mode: the topics to subscribe are configurable now, and nested full topics as well as OpenBeken topics are supported
-* (@GermanBluefox) Bridge mode: devices are named after their MQTT client ID like with the built-in broker and are no longer renamed by less reliable sources
-* (@GermanBluefox) Bridge mode: the `alive` state is set from the last will topic (LWT), so devices are recognized as offline
-* (@GermanBluefox) Commands for auto-created states are sent to `cmnd/...` again, also for nested full topics
-* (@GermanBluefox) `info.connection` contains the list of the connected clients again (server mode), in bridge mode the URL of the broker
-* (@GermanBluefox/patricknitsch) Bridge mode: support for the full topic structure `%topic%/%prefix%/` (device first), detected automatically per device
-* (@GermanBluefox/patricknitsch) Bridge mode: encrypted connections with CA/client certificates and optional certificate check, configurable client ID, keepalive and clean session
-* (@GermanBluefox/patricknitsch) Bridge mode: a fix prefix in front of the full topic (e.g. `gateway/tele/device/STATE`) is recognized and used for the commands
-* (@Apollon77/@copilot) Added support for OpenBeken LED datapoints (led_enableAll, led_dimmer, led_temperature, led_basecolor_rgb, led_finalcolor_rgbcw, led_basecolor_rgbcw, led_hue, led_saturation) - enables control of OpenBeken LED devices with automatic topic mapping for /get and /set suffixes
-* (@Apollon77/@copilot) Added PulseTime1-PulseTime16 datapoint support - users can now read and set PulseTime values directly from ioBroker to control relay auto-off timers
-* (@GermanBluefox) Breaking: a minimal supported Node.js version is now 22
-
 ## License
 
 The MIT License (MIT)

package/admin/i18n/de.json

@@ -89,5 +89,9 @@
     "ms": "ms",
     "sec": "Sekunde",
     "Check for firmware updates": "Nach Firmware-Updates suchen",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Liest einmal täglich die neueste Tasmota-Version von GitHub, damit der Gerätemanager die Geräte aktualisieren kann"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Liest einmal täglich die neueste Tasmota-Version von GitHub, damit der Gerätemanager die Geräte aktualisieren kann",
+    "Port": "Port",
+    "User": "Benutzer",
+    "Password": "Passwort",
+    "in seconds": "in Sekunden"
 }

package/admin/i18n/en.json

@@ -89,5 +89,9 @@
     "ms": "ms",
     "sec": "sec",
     "Check for firmware updates": "Check for firmware updates",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices",
+    "Port": "Port",
+    "User": "User",
+    "Password": "Password",
+    "in seconds": "in seconds"
 }

package/admin/i18n/es.json

@@ -89,5 +89,9 @@
     "ms": "EM",
     "sec": "segundo",
     "Check for firmware updates": "Buscar actualizaciones de firmware",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Lee una vez al día la última versión de Tasmota desde GitHub, para que el administrador de dispositivos pueda actualizar los dispositivos"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Lee una vez al día la última versión de Tasmota desde GitHub, para que el administrador de dispositivos pueda actualizar los dispositivos",
+    "Port": "Puerto",
+    "User": "Usuario",
+    "Password": "Contraseña",
+    "in seconds": "en segundos"
 }

package/admin/i18n/fr.json

@@ -89,5 +89,9 @@
     "ms": "MS",
     "sec": "seconde",
     "Check for firmware updates": "Rechercher des mises à jour du firmware",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Lit une fois par jour la dernière version de Tasmota sur GitHub, afin que le gestionnaire d'appareils puisse mettre à jour les appareils"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Lit une fois par jour la dernière version de Tasmota sur GitHub, afin que le gestionnaire d'appareils puisse mettre à jour les appareils",
+    "Port": "Port",
+    "User": "Utilisateur",
+    "Password": "Mot de passe",
+    "in seconds": "en secondes"
 }

package/admin/i18n/it.json

@@ -89,5 +89,9 @@
     "ms": "SM",
     "sec": "sicurezza",
     "Check for firmware updates": "Controlla aggiornamenti del firmware",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Legge una volta al giorno l'ultima versione di Tasmota da GitHub, così il gestore dispositivi può aggiornare i dispositivi"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Legge una volta al giorno l'ultima versione di Tasmota da GitHub, così il gestore dispositivi può aggiornare i dispositivi",
+    "Port": "Porta",
+    "User": "Utente",
+    "Password": "Password",
+    "in seconds": "in secondi"
 }

package/admin/i18n/nl.json

@@ -89,5 +89,9 @@
     "ms": "mevrouw",
     "sec": "sec",
     "Check for firmware updates": "Controleren op firmware-updates",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Leest eenmaal per dag de nieuwste Tasmota-versie van GitHub, zodat de apparaatbeheerder de apparaten kan bijwerken"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Leest eenmaal per dag de nieuwste Tasmota-versie van GitHub, zodat de apparaatbeheerder de apparaten kan bijwerken",
+    "Port": "Poort",
+    "User": "Gebruiker",
+    "Password": "Wachtwoord",
+    "in seconds": "in seconden"
 }

package/admin/i18n/pl.json

@@ -89,5 +89,9 @@
     "ms": "SM",
     "sec": "sek",
     "Check for firmware updates": "Sprawdzaj aktualizacje oprogramowania",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Raz dziennie odczytuje najnowszą wersję Tasmota z GitHub, aby menedżer urządzeń mógł aktualizować urządzenia"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Raz dziennie odczytuje najnowszą wersję Tasmota z GitHub, aby menedżer urządzeń mógł aktualizować urządzenia",
+    "Port": "Port",
+    "User": "Użytkownik",
+    "Password": "Hasło",
+    "in seconds": "w sekundach"
 }

package/admin/i18n/pt.json

@@ -89,5 +89,9 @@
     "ms": "EM",
     "sec": "seg",
     "Check for firmware updates": "Verificar atualizações de firmware",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Lê a versão mais recente do Tasmota no GitHub uma vez por dia, para que o gerenciador de dispositivos possa atualizar os dispositivos"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Lê a versão mais recente do Tasmota no GitHub uma vez por dia, para que o gerenciador de dispositivos possa atualizar os dispositivos",
+    "Port": "Porta",
+    "User": "Usuário",
+    "Password": "Senha",
+    "in seconds": "em segundos"
 }

package/admin/i18n/ru.json

@@ -89,5 +89,9 @@
     "ms": "РС",
     "sec": "сек",
     "Check for firmware updates": "Проверять обновления прошивки",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Раз в день считывает последнюю версию Tasmota с GitHub, чтобы менеджер устройств мог обновлять устройства"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Раз в день считывает последнюю версию Tasmota с GitHub, чтобы менеджер устройств мог обновлять устройства",
+    "Port": "Порт",
+    "User": "Пользователь",
+    "Password": "Пароль",
+    "in seconds": "в секундах"
 }

package/admin/i18n/uk.json

@@ -89,5 +89,9 @@
     "ms": "РС",
     "sec": "сек",
     "Check for firmware updates": "Перевіряти оновлення прошивки",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Раз на день зчитує останню версію Tasmota з GitHub, щоб менеджер пристроїв міг оновлювати пристрої"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "Раз на день зчитує останню версію Tasmota з GitHub, щоб менеджер пристроїв міг оновлювати пристрої",
+    "Port": "Порт",
+    "User": "Користувач",
+    "Password": "Пароль",
+    "in seconds": "у секундах"
 }

package/admin/i18n/zh-cn.json

@@ -89,5 +89,9 @@
     "ms": "多发性硬化症",
     "sec": "秒",
     "Check for firmware updates": "检查固件更新",
-    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "每天从 GitHub 读取一次最新的 Tasmota 版本，以便设备管理器可以更新设备"
+    "Reads the latest Tasmota release from GitHub once a day, so the device manager can update the devices": "每天从 GitHub 读取一次最新的 Tasmota 版本，以便设备管理器可以更新设备",
+    "Port": "端口",
+    "User": "用户",
+    "Password": "密码",
+    "in seconds": "以秒为单位"
 }

package/admin/jsonConfig.json

@@ -101,8 +101,8 @@
                     "xs": 12,
                     "sm": 12,
                     "md": 3,
-                    "lg": 6,
-                    "xl": 6
+                    "lg": 3,
+                    "xl": 3
                 },
                 "externalBrokerRejectUnauthorized": {
                     "newLine": true,

package/io-package.json

@@ -1,8 +1,21 @@
 {
   "common": {
     "name": "sonoff",
-    "version": "5.1.0",
+    "version": "5.1.1",
     "news": {
+      "5.1.1": {
+        "en": "Admin 7.6.20+ is required. Added missing translations. The tests run on Windows and macOS too",
+        "de": "Admin 7.6.20+ ist nötig. Fehlende Übersetzungen. Die Tests laufen auf Windows und macOS",
+        "ru": "Требуется администратор версии 7.6.20+. Добавлены недостающие переводы. Тесты также работают в Windows и macOS",
+        "pt": "Requer o Admin 7.6.20+. Adição de traduções faltantes. Os testes também são em Windows e macOS",
+        "nl": "Admin 7.6.20+ is vereist. Ontbrekende vertalingen toegevoegd. De tests worden ook uitgevoerd op Windows en MacOS",
+        "fr": "Admin 7.6.20+ est requis. Ajout de traductions manquantes. Les tests se font aussi sur Windows et macOS",
+        "it": "Serve Admin 7.6.20+. Aggiunte traduzioni mancanti. I test sono anche su Windows e macOS",
+        "es": "Se necesita Admin 7.6.20+. Añadió las traducciones que faltaban Las pruebas también son en Windows y macOS",
+        "pl": "Wymagany jest Admin 7.6.20+. Dodano brakujące tłumaczenia. Testy działają również w systemach Windows i macOS",
+        "uk": "Адміністратор 7.6.20+ обов'язковий. Додані відсутні переклади. Тести також виконуються на Windows та macOS",
+        "zh-cn": "需要管理员 7.6.20+。添加了缺失的翻译。测试也在 Windows 和 macOS 上运行"
+      },
       "5.1.0": {
         "en": "Device manager: firmware update of Tasmota devices. The latest release is read from GitHub once a day (option \"Check for firmware updates\"), devices with an older firmware show the update indicator. The update is started with `Upgrade 1`, so the device downloads the firmware from its own OTA URL\nDevice manager: search for Tasmota devices in the network and connect them with ioBroker (enables MQTT and writes server, port, user and password)\nDevice manager: the connection state and the Wi-Fi signal are updated live, the signal is shown in dBm (`Wifi_Signal`) instead of the link quality in percent. Toggles like `Fade` are switches instead of buttons\nThe devices are linked with their `alive` state (`common.statusStates`), so admin shows in the object tree whether a device is connected\nThe port of the built-in MQTT server is reported to js-controller 8 as a used resource (`common.declareUsedResources`), so admin shows which ports are occupied. In bridge mode no port is reported. If the port is already used, the log names the instance that occupies it",
         "de": "Gerätemanager: Firmware-Update von Tasmota. Die neueste Version wird einmal täglich von GitHub gelesen (Option „Nach Updates suchen“), Geräte mit älterer Firmware zeigen das Update an. Das Update beginnt mit `Upgrade 1`, das Gerät lädt die Firmware von seiner OTA-URL\nGerätemanager: Suche im Netzwerk nach Tasmota-Geräten und verbinde sie mit ioBroker (aktiviert MQTT und schreibt Server, Port und Passwort)\nGerätemanager: Verbindungsstatus und Wi-Fi-Signal werden live aktualisiert, in dBm (`Wifi_Signal`) statt der Verbindungsqualität in%. Schalter wie `Fade` sind Schalter statt Knöpfe\nDie Geräte sind „live“ (common.StatusStates) verknüpft, sodass der Admin im Objektbaum zeigt, ob ein Gerät verbunden ist\nDer Port des eingebauten MQTT-Servers wird JS-Controller 8 als genutzte Ressource gemeldet (`common.declareUsedResources`), sodass admin zeigt, welche Ports belegt sind. Im Bridge-Modus ist kein Port gemeldet. Ist der Port bereits belegt, benennt das Log die ihn belegt",
@@ -80,19 +93,6 @@
         "pl": "**WAŻNE**: Komendy teraz poprawnie używają prefiksu cmnd/ zamiast prefiksu tele/\nDodano konfigurację dla zaawansowanych ustawień MQTT\nUlepszono, dodano i zoptymalizowano różne definicje i role punktów danych, zobacz Changelog",
         "uk": "**ВАЖЛИВО**: Тепер команди правильно використовують префікс cmnd/ замість префіксу tele/\nДодана конфігурація для розширених налаштувань MQTT.\nПокращено, додано та оптимізовано різні визначення точок даних та ролей, дивіться Журнал змін",
         "zh-cn": "**重要提示**：命令现在正确使用cmnd/前缀，而不再使用tele/前缀\n添加了高级MQTT设置的配置\n增强，添加和优化了各种数据点的定义和角色，详见变更日志。"
-      },
-      "3.2.1": {
-        "en": "Sanitize the IDs of the clients\nAdded information about connected clients in the server mode",
-        "de": "Sanitize die IDs der Kunden\nWeitere Informationen zu verbundenen Clients im Servermodus",
-        "ru": "Санитизируйте идентификаторы клиентов\nДобавлена информация о подключенных клиентах в серверном режиме",
-        "pt": "Sanitize os IDs dos clientes\nInformaçÃμes adicionais sobre clientes conectados no modo servidor",
-        "nl": "De identificaties van de cliënten reinigen\nInformatie over verbonden clients toegevoegd in de servermodus",
-        "fr": "Sanitiser les ID des clients\nAjout d'informations sur les clients connectés en mode serveur",
-        "it": "Smaltire gli ID dei clienti\nAggiunte informazioni sui client connessi nella modalità server",
-        "es": "Sanitize the IDs of the clients\nInformación adicional sobre clientes conectados en el modo servidor",
-        "pl": "Sanitize identyfikatory klientów\nDodano informacje o podłączonych klientach w trybie serwera",
-        "uk": "Сатизувати ідентифікатори клієнтів\nДодано інформацію про підключені клієнти в режимі сервера",
-        "zh-cn": "对客户身份进行保密\n在服务器模式中添加了连接客户端的信息"
       }
     },
     "messages": [
@@ -216,7 +216,7 @@
     ],
     "globalDependencies": [
       {
-        "admin": ">=7.6.17"
+        "admin": ">=7.6.20"
       }
     ],
     "plugins": {
@@ -278,7 +278,7 @@
       "_id": "info.connection",
       "type": "state",
       "common": {
-        "role": "info.clients",
+        "role": "info.status",
         "name": "List of connected clients",
         "type": "string",
         "read": true,

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "iobroker.sonoff",
   "description": "The adapter allows to send and receive MQTT messages from ioBroker and to be a broker.",
-  "version": "5.1.0",
+  "version": "5.1.1",
   "author": "bluefox <dogafox@gmail.com>",
   "homepage": "https://github.com/ioBroker/ioBroker.sonoff",
   "repository": {
@@ -17,8 +17,8 @@
   ],
   "dependencies": {
     "@iobroker/adapter-core": "^3.4.3",
-    "@iobroker/dm-utils": "^3.2.0",
-    "mqtt": "^5.15.2",
+    "@iobroker/dm-utils": "^3.2.1",
+    "mqtt": "^5.16.0",
     "mqtt-connection": "^4.1.0"
   },
   "devDependencies": {
@@ -29,9 +29,10 @@
     "@iobroker/adapter-dev": "^1.5.0",
     "@iobroker/build-tools": "^3.0.3",
     "@iobroker/eslint-config": "^2.3.4",
-    "@iobroker/testing": "^6.2.0",
-    "@iobroker/types": "^7.2.2",
+    "@iobroker/testing": "^6.3.1",
+    "@iobroker/types": "^7.2.5",
     "@tsconfig/node22": "^22.0.6",
+    "@types/node": "^22.20.5",
     "typescript": "~6.0.3"
   },
   "bugs": {