iobroker.sonoff 4.0.0 → 4.2.0

package/README.md

@@ -149,7 +149,7 @@ Usually TELE_SENSOR should be sufficient for most users.
 * `Create object tree` creates objects as tree structure
 
 **Warning!** This option will mess up your sonoff object tree! You have to redo all the settings for storage...
-Store the object structure as JSON file, so you can recreate your old structure.
+Store the object structure as a JSON file, so you can recreate your old structure.
 Best is to stop the adapter, delete all objects under sonoff and start the adapter again.
 
 ## Flags for LED controllers
@@ -167,45 +167,48 @@ States:
 	### **WORK IN PROGRESS**
 -->
 ## Changelog
+### 4.2.0 (2026-09-07)
+* (@patricknitsch) Added Device Manager for existing devices
+
 ### 4.0.0 (2026-08-13)
 * (ioBroker-Bot) Adapter requires js-controller >= 6.0.11 now.
-* (stony2k) Add bridge mode to connect to an external MQTT broker instead of running a built-in broker
-* (stony2k) Fix alive state object not being created (warning "has no existing object")
-* (bluefox/GreatSUN) Fixed the names of data points inside a group: since 3.3.0 e.g. `SML_Total_in` was created as `SML_in` (#489)
-* (bluefox/baetzst) The MAC address and the other network and firmware information of a device are stored as data points (`INFO.Mac`, `INFO.Gateway`, `INFO.Hardware`, ...) (#513)
-* (bluefox) Server mode: the adapter requests `Status 5` and `Status 2` from a device with its first message, so the INFO states are filled even if the device did not reboot
-* (bluefox) The states which were created with a shortened name by 3.3.x are listed in the log on start, so they can be deleted (#489)
-* (bluefox) Bridge mode: the topics to subscribe are configurable now and nested full topics as well as OpenBeken topics are supported
-* (bluefox) Bridge mode: devices are named after their MQTT client ID like with the built-in broker and are no longer renamed by less reliable sources
-* (bluefox) Bridge mode: the `alive` state is set from the last will topic (LWT), so devices are recognized as offline
-* (bluefox) Commands for auto-created states are sent to `cmnd/...` again, also for nested full topics
-* (bluefox) `info.connection` contains the list of the connected clients again (server mode), in bridge mode the URL of the broker
-* (bluefox/patricknitsch) Bridge mode: support for the full topic structure `%topic%/%prefix%/` (device first), detected automatically per device
-* (bluefox/patricknitsch) Bridge mode: encrypted connections with CA/client certificates and optional certificate check, configurable client ID, keepalive and clean session
-* (bluefox/patricknitsch) Bridge mode: a fix prefix in front of the full topic (e.g. `gateway/tele/device/STATE`) is recognized and used for the commands
-* (@Apollon77/@copilot) Add support for OpenBeken LED datapoints (led_enableAll, led_dimmer, led_temperature, led_basecolor_rgb, led_finalcolor_rgbcw, led_basecolor_rgbcw, led_hue, led_saturation) - enables control of OpenBeken LED devices with automatic topic mapping for /get and /set suffixes
-* (@Apollon77/@copilot) Add PulseTime1-PulseTime16 datapoint support - users can now read and set PulseTime values directly from ioBroker to control relay auto-off timers
-* (@GermanBluefox) Breaking: minimal supported Node.js version is now 22
+* (stony2k) Added bridge mode to connect to an external MQTT broker instead of running a built-in broker
+* (stony2k) Fixed the alive state object not being created (warning "has no existing object")
+* (@GermanBluefox/GreatSUN) Fixed the names of data points inside a group: since 3.3.0 e.g. `SML_Total_in` was created as `SML_in` (#489)
+* (@GermanBluefox/baetzst) The MAC address and the other network and firmware information of a device are stored as data points (`INFO.Mac`, `INFO.Gateway`, `INFO.Hardware`, ...) (#513)
+* (@GermanBluefox) Server mode: the adapter requests `Status 5` and `Status 2` from a device with its first message, so the INFO states are filled even if the device did not reboot
+* (@GermanBluefox) The states which were created with a shortened name by 3.3.x are listed in the log on start, so they can be deleted (#489)
+* (@GermanBluefox) Bridge mode: the topics to subscribe are configurable now, and nested full topics as well as OpenBeken topics are supported
+* (@GermanBluefox) Bridge mode: devices are named after their MQTT client ID like with the built-in broker and are no longer renamed by less reliable sources
+* (@GermanBluefox) Bridge mode: the `alive` state is set from the last will topic (LWT), so devices are recognized as offline
+* (@GermanBluefox) Commands for auto-created states are sent to `cmnd/...` again, also for nested full topics
+* (@GermanBluefox) `info.connection` contains the list of the connected clients again (server mode), in bridge mode the URL of the broker
+* (@GermanBluefox/patricknitsch) Bridge mode: support for the full topic structure `%topic%/%prefix%/` (device first), detected automatically per device
+* (@GermanBluefox/patricknitsch) Bridge mode: encrypted connections with CA/client certificates and optional certificate check, configurable client ID, keepalive and clean session
+* (@GermanBluefox/patricknitsch) Bridge mode: a fix prefix in front of the full topic (e.g. `gateway/tele/device/STATE`) is recognized and used for the commands
+* (@Apollon77/@copilot) Added support for OpenBeken LED datapoints (led_enableAll, led_dimmer, led_temperature, led_basecolor_rgb, led_finalcolor_rgbcw, led_basecolor_rgbcw, led_hue, led_saturation) - enables control of OpenBeken LED devices with automatic topic mapping for /get and /set suffixes
+* (@Apollon77/@copilot) Added PulseTime1-PulseTime16 datapoint support - users can now read and set PulseTime values directly from ioBroker to control relay auto-off timers
+* (@GermanBluefox) Breaking: a minimal supported Node.js version is now 22
 
 ### 3.3.0 (2025-09-20)
-* (@Apollon77/@copilot) **IMPORTANT**: Commands now correctly use cmnd/ prefix instead of tele/ prefix
+* (@Apollon77/@copilot) **IMPORTANT**: Commands now correctly use `cmnd/` prefix instead of `tele/` prefix
 * (@Apollon77/@copilot) Added configuration for advanced MQTT settings
-* (@Apollon77/@copilot) Fix shutter command mapping to use correct Tasmota format - Transforms Shutter1_Position to ShutterPosition1 for proper device control
-* (@Apollon77/@copilot) Fix IRHVAC Power, Light and Mode fields showing NULL instead of actual string values
-* (@Apollon77/@copilot) Add Zigbee device control support for Tasmota coordinators - users can now control Zigbee devices (Power/Dimmer) through ioBroker states via automatic ZbSend command generation
-* (@Apollon77/@copilot) Add support for Tasmota tele/MARGINS messages enabling integration of PowerLow, PowerHigh, and PowerDelta limits
-* (@Apollon77/@copilot) Fix POW R2 energy datapoints not being created by enabling TELE_STATE by default
-* (@Apollon77/@copilot) Fix pressure and temperature unit display to respect PressureUnit and TempUnit from Tasmota MQTT messages
-* (@Apollon77/@copilot) Add support for decoupled button actions in Tasmota devices - creates Button1-Button8 datapoints for button events
-* (@Apollon77/@copilot) Fix RESULT message processing bug where tele/*/RESULT messages were incorrectly processed as WAKEUP instead of RESULT
-* (@Apollon77/@copilot) Fix deprecated value.power.consumption role for ENERGY_Power datapoint to improve device detection
-* (@Apollon77/@copilot) Add support for SHUTTER5-SHUTTER16 datapoints for ESP32 shutter32 devices
-* (@Apollon77/@copilot) Update admin UI responsive design to use ioBroker standard values for mobile compatibility
-* (@Apollon77/@copilot) Add support for Sonoff B1 (RGB LED) and Sonoff SC (Environmental Sensor) devices with proper value ranges
-* (@Apollon77/@copilot) Add meaningful state labels for Scheme datapoint (color animation schemes)
-* (@Apollon77/@copilot) Add configuration option to suppress "not connected" warnings for temporarily offline devices
-* (@Apollon77/@copilot) Add Switch5-Switch28 datapoint definitions for consistent boolean mapping
-* (@Apollon77/@copilot) Fix write flag for all Switch datapoints to enable proper control from ioBroker
+* (@Apollon77/@copilot) Fixed shutter command mapping to use the correct Tasmota format - Transforms Shutter1_Position to ShutterPosition1 for proper device control
+* (@Apollon77/@copilot) Fixed IRHVAC Power, Light and Mode fields showing NULL instead of actual string values
+* (@Apollon77/@copilot) Added Zigbee device control support for Tasmota coordinators - users can now control Zigbee devices (Power/Dimmer) through ioBroker states via automatic ZbSend command generation
+* (@Apollon77/@copilot) Added support for Tasmota tele/MARGINS messages enabling integration of PowerLow, PowerHigh, and PowerDelta limits
+* (@Apollon77/@copilot) Fixed POW R2 energy datapoints not being created by enabling TELE_STATE by default
+* (@Apollon77/@copilot) Fixed pressure and temperature unit display to respect PressureUnit and TempUnit from Tasmota MQTT messages
+* (@Apollon77/@copilot) Added support for decoupled button actions in Tasmota devices - creates Button1-Button8 datapoints for button events
+* (@Apollon77/@copilot) Fixed RESULT message processing bug where tele/*/RESULT messages were incorrectly processed as WAKEUP instead of RESULT
+* (@Apollon77/@copilot) Fixed the deprecated value.power.consumption role for ENERGY_Power datapoint to improve device detection
+* (@Apollon77/@copilot) Added support for SHUTTER5-SHUTTER16 datapoints for ESP32 shutter32 devices
+* (@Apollon77/@copilot) Updated admin UI responsive design to use ioBroker standard values for mobile compatibility
+* (@Apollon77/@copilot) Added support for Sonoff B1 (RGB LED) and Sonoff SC (Environmental Sensor) devices with proper value ranges
+* (@Apollon77/@copilot) Added meaningful state labels for Scheme datapoint (color animation schemes)
+* (@Apollon77/@copilot) Added a configuration option to suppress "not connected" warnings for temporarily offline devices
+* (@Apollon77/@copilot) Added Switch5-Switch28 datapoint definitions for consistent boolean mapping
+* (@Apollon77/@copilot) Fixed a write flag for all Switch datapoints to enable proper control from ioBroker
 
 ### 3.2.1 (2024-10-07)
 
@@ -214,9 +217,6 @@ States:
 ### 3.2.0 (2024-08-28)
 * (bluefox) Added information about connected clients in the server mode
 
-### 3.1.2 (2024-08-17)
-* (mattreim) updated packages
-
 [Older changelogs can be found there](CHANGELOG_OLD.md)
 
 ## License

package/admin/i18n/de.json

@@ -4,32 +4,52 @@
     "Authentication settings": "Authentifizierungseinstellungen",
     "Auto creation of states": "Automatische Erstellung von Zuständen",
     "Chained certificate:": "Verkettetes Zertifikat",
+    "Check the certificate of the broker": "Zertifikat des Brokers prüfen",
+    "Clean session": "Clean Session",
     "Client": "Client/Subscriber",
+    "Client ID": "Client-ID",
     "Client ID:": "Client ID",
     "Client timeout": "Client-Timeout",
+    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Kommagetrennte Liste. Standard-FullTopic: tele/#, stat/# - Gerät zuerst: +/tele/+, +/stat/+",
     "Connection": "Verbindung",
     "Connection settings": "Verbindungseinstellungen",
     "Create object tree": "Objektbaum erstellen",
+    "Deactivate it for self-signed certificates": "Für selbstsignierte Zertifikate deaktivieren",
+    "Deactivate it, so the broker stores the messages while the adapter is not running": "Deaktivieren, damit der Broker die Nachrichten speichert, während der Adapter nicht läuft",
     "Default QoS": "Standard QoS",
     "Default Quality of Service level (0, 1, or 2)": "Standardqualität der Serviceebene (0, 1 oder 2)",
+    "Device manager": "Geräte-Manager",
+    "Disables the built-in MQTT server and connects as client to an external broker": "Deaktiviert den integrierten MQTT-Server und verbindet sich als Client mit einem externen Broker",
     "Divided by comma": "Mit Kommata getrennt, z.B 'mqtt/0/#,javascript/#'",
+    "Empty: iobroker_sonoff_<instance>": "Leer: iobroker_sonoff_<Instanz>",
+    "External MQTT broker": "Externer MQTT-Broker",
+    "External broker URL": "URL des externen Brokers",
+    "External broker password": "Externer Broker-Passwort",
+    "External broker user": "Externer Broker-Benutzer",
     "For stat/RESULT": "Für stat/RESULT",
     "For tele/MARGINS": "Für tele/MARGINS",
     "For tele/SENSOR": "Für tele/SENSOR",
     "For tele/STATE": "Für tele/STATE",
+    "General settings": "Allgemeine Einstellungen",
     "IP": "IP",
     "Ignore 'not connected' warnings": "'Nicht verbunden' Warnungen ignorieren",
     "Ignore warnings with pingreq": "Warnungen mit pingreq ignorieren",
     "Interval before send topics by connection:": "Interval vom Senden von allen Topics bei der Verbindung",
     "Interval in milliseconds for message retransmission": "Intervall in Millisekunden für die Neuübertragung zur Nachricht",
+    "Keepalive": "Keepalive",
     "Main settings": "Allgemeine Einstellungen",
     "Mask to publish": "z.B 'mqtt.0.*,javascript.*'",
     "Mask to publish own states:": "Maske zur Bekanntgabe eigener States",
     "Max topic length:": "Maximale Länge eines Topicnamens",
     "Maximum number of retransmission attempts": "Maximale Anzahl von Wiedervermietungsversuchen",
+    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Optional, z.B. /opt/iobroker/certs/ca.crt",
+    "Optional, only for client certificate authentication": "Optional, nur für die Authentifizierung mit Client-Zertifikat",
     "Other settings": "Andere Einstellungen",
     "Password confirmation:": "Passwort-Bestätigung",
     "Password:": "Passwort",
+    "Path to the CA certificate": "Pfad zum CA-Zertifikat",
+    "Path to the client certificate": "Pfad zum Client-Zertifikat",
+    "Path to the client key": "Pfad zum Client-Schlüssel",
     "Patterns:": "Subscribe Pattern",
     "Port:": "Port",
     "Prefix for topics:": "Prefix für alle Topics",
@@ -52,38 +72,20 @@
     "Suppress warnings when commands are sent to offline devices": "Warnungen unterdrücken, wenn Befehle an Offline -Geräte gesendet werden",
     "Test connection": "Die Verbindung zum Server testen",
     "Time in minutes to store client information": "Zeit in Minuten, um Kundeninformationen zu speichern",
+    "Topics to subscribe": "Zu abonnierende Topics",
     "Trace output for every message:": "Ausgabe jeder Nachricht loggen (debug)",
     "Type:": "Typ",
     "URL:": "URL",
     "Use WebSockets:": "Benutze auch WebSockets",
     "Use chunk patch:": "Benutze Patch für Chunking",
     "Use different topic names for set and get:": "Unterschiedliche Topic-Namen für setzen und lesen nutzen",
+    "Use external MQTT broker": "Externen MQTT-Broker verwenden",
     "User:": "Benutzer",
     "WARNING! Check README.md!": "WARNUNG! Überprüfen Sie README.md!",
-    "External MQTT broker": "Externer MQTT-Broker",
-    "Use external MQTT broker": "Externen MQTT-Broker verwenden",
-    "Disables the built-in MQTT server and connects as client to an external broker": "Deaktiviert den integrierten MQTT-Server und verbindet sich als Client mit einem externen Broker",
-    "External broker URL": "URL des externen Brokers",
-    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "z.B. mqtt://192.168.1.100:1883 oder mqtts://broker:8883",
-    "External broker user": "Externer Broker-Benutzer",
-    "External broker password": "Externer Broker-Passwort",
-    "Topics to subscribe": "Zu abonnierende Topics",
-    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Kommagetrennte Liste. Standard-FullTopic: tele/#, stat/# - Gerät zuerst: +/tele/+, +/stat/+",
-    "Client ID": "Client-ID",
-    "Empty: iobroker_sonoff_<instance>": "Leer: iobroker_sonoff_<Instanz>",
-    "Keepalive": "Keepalive",
-    "sec": "Sek.",
-    "Clean session": "Clean Session",
-    "Deactivate it, so the broker stores the messages while the adapter is not running": "Deaktivieren, damit der Broker die Nachrichten speichert, während der Adapter nicht läuft",
-    "Check the certificate of the broker": "Zertifikat des Brokers prüfen",
-    "Deactivate it for self-signed certificates": "Für selbstsignierte Zertifikate deaktivieren",
-    "Path to the CA certificate": "Pfad zum CA-Zertifikat",
-    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Optional, z.B. /opt/iobroker/certs/ca.crt",
-    "Path to the client certificate": "Pfad zum Client-Zertifikat",
-    "Optional, only for client certificate authentication": "Optional, nur für die Authentifizierung mit Client-Zertifikat",
-    "Path to the client key": "Pfad zum Client-Schlüssel",
     "Without URL the built-in MQTT server will be started": "Ohne URL wird der integrierte MQTT-Server gestartet",
     "chars": "Zeichen",
     "connected": "verbunden",
-    "ms": "ms"
-}
+    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "z.B. mqtt://192.168.1.100:1883 oder mqtts://broker:8883",
+    "ms": "ms",
+    "sec": "Sek."
+}

package/admin/i18n/en.json

@@ -4,32 +4,52 @@
     "Authentication settings": "Authentication settings",
     "Auto creation of states": "Auto creation of states",
     "Chained certificate:": "Chained certificate",
+    "Check the certificate of the broker": "Check the certificate of the broker",
+    "Clean session": "Clean session",
     "Client": "Client/subscriber",
+    "Client ID": "Client ID",
     "Client ID:": "Client ID",
     "Client timeout": "Client timeout",
+    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+",
     "Connection": "Connection",
     "Connection settings": "Connection settings",
     "Create object tree": "Create object tree",
+    "Deactivate it for self-signed certificates": "Deactivate it for self-signed certificates",
+    "Deactivate it, so the broker stores the messages while the adapter is not running": "Deactivate it, so the broker stores the messages while the adapter is not running",
     "Default QoS": "Default QoS",
     "Default Quality of Service level (0, 1, or 2)": "Default Quality of Service level (0, 1, or 2)",
+    "Device manager": "Device manager",
+    "Disables the built-in MQTT server and connects as client to an external broker": "Disables the built-in MQTT server and connects as client to an external broker",
     "Divided by comma": "Divided by comma, e.g. 'mqtt/0/#,javascript/#'",
+    "Empty: iobroker_sonoff_<instance>": "Empty: iobroker_sonoff_<instance>",
+    "External MQTT broker": "External MQTT broker",
+    "External broker URL": "External broker URL",
+    "External broker password": "External broker password",
+    "External broker user": "External broker user",
     "For stat/RESULT": "For stat/RESULT",
     "For tele/MARGINS": "For tele/MARGINS",
     "For tele/SENSOR": "For tele/SENSOR",
     "For tele/STATE": "For tele/STATE",
+    "General settings": "General settings",
     "IP": "IP",
     "Ignore 'not connected' warnings": "Ignore 'not connected' warnings",
     "Ignore warnings with pingreq": "Ignore warnings with pingreq",
     "Interval before send topics by connection:": "Interval before send topics by connection",
     "Interval in milliseconds for message retransmission": "Interval in milliseconds for message retransmission",
+    "Keepalive": "Keepalive",
     "Main settings": "Main settings",
     "Mask to publish": "e.g. 'mqtt.0.*,javascript.*'",
     "Mask to publish own states:": "Mask to publish own states",
     "Max topic length:": "Max topic name length",
     "Maximum number of retransmission attempts": "Maximum number of retransmission attempts",
+    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Optional, e.g. /opt/iobroker/certs/ca.crt",
+    "Optional, only for client certificate authentication": "Optional, only for client certificate authentication",
     "Other settings": "Other settings",
     "Password confirmation:": "Password confirmation",
     "Password:": "Password",
+    "Path to the CA certificate": "Path to the CA certificate",
+    "Path to the client certificate": "Path to the client certificate",
+    "Path to the client key": "Path to the client key",
     "Patterns:": "Subscribe patterns",
     "Port:": "Port",
     "Prefix for topics:": "Prefix for all topics",
@@ -52,38 +72,20 @@
     "Suppress warnings when commands are sent to offline devices": "Suppress warnings when commands are sent to offline devices",
     "Test connection": "Test connection with Server",
     "Time in minutes to store client information": "Time in minutes to store client information",
+    "Topics to subscribe": "Topics to subscribe",
     "Trace output for every message:": "Trace output for every message",
     "Type:": "Type",
     "URL:": "URL",
     "Use WebSockets:": "Use WebSockets too",
     "Use chunk patch:": "Use chunk patch",
     "Use different topic names for set and get:": "Use different topic names for set and get",
+    "Use external MQTT broker": "Use external MQTT broker",
     "User:": "User",
     "WARNING! Check README.md!": "WARNING! Check README.md!",
-    "External MQTT broker": "External MQTT broker",
-    "Use external MQTT broker": "Use external MQTT broker",
-    "Disables the built-in MQTT server and connects as client to an external broker": "Disables the built-in MQTT server and connects as client to an external broker",
-    "External broker URL": "External broker URL",
-    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883",
-    "External broker user": "External broker user",
-    "External broker password": "External broker password",
-    "Topics to subscribe": "Topics to subscribe",
-    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+",
-    "Client ID": "Client ID",
-    "Empty: iobroker_sonoff_<instance>": "Empty: iobroker_sonoff_<instance>",
-    "Keepalive": "Keepalive",
-    "sec": "sec",
-    "Clean session": "Clean session",
-    "Deactivate it, so the broker stores the messages while the adapter is not running": "Deactivate it, so the broker stores the messages while the adapter is not running",
-    "Check the certificate of the broker": "Check the certificate of the broker",
-    "Deactivate it for self-signed certificates": "Deactivate it for self-signed certificates",
-    "Path to the CA certificate": "Path to the CA certificate",
-    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Optional, e.g. /opt/iobroker/certs/ca.crt",
-    "Path to the client certificate": "Path to the client certificate",
-    "Optional, only for client certificate authentication": "Optional, only for client certificate authentication",
-    "Path to the client key": "Path to the client key",
     "Without URL the built-in MQTT server will be started": "Without URL the built-in MQTT server will be started",
     "chars": "chars",
     "connected": "connected",
-    "ms": "ms"
-}
+    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883",
+    "ms": "ms",
+    "sec": "sec"
+}

package/admin/i18n/es.json

@@ -4,32 +4,52 @@
     "Authentication settings": "Configuraciones de autenticación",
     "Auto creation of states": "Creación automática de estados",
     "Chained certificate:": "Certificado encadenado",
+    "Check the certificate of the broker": "Comprobar el certificado del broker",
+    "Clean session": "Sesión limpia",
     "Client": "Cliente/suscriptor",
+    "Client ID": "ID de cliente",
     "Client ID:": "Identificación del cliente",
     "Client timeout": "tiempo de espera del cliente",
+    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Lista separada por comas. FullTopic estándar: tele/#, stat/# - dispositivo primero: +/tele/+, +/stat/+",
     "Connection": "Conexión",
     "Connection settings": "Configuración de conexión",
     "Create object tree": "Crear árbol de objetos",
+    "Deactivate it for self-signed certificates": "Desactívelo para certificados autofirmados",
+    "Deactivate it, so the broker stores the messages while the adapter is not running": "Desactívelo para que el broker almacene los mensajes mientras el adaptador no se está ejecutando",
     "Default QoS": "QoS predeterminado",
     "Default Quality of Service level (0, 1, or 2)": "Calidad predeterminada del nivel de servicio (0, 1 o 2)",
+    "Device manager": "Gestor de dispositivos",
+    "Disables the built-in MQTT server and connects as client to an external broker": "Desactiva el servidor MQTT integrado y se conecta como cliente a un broker externo",
     "Divided by comma": "Dividido por coma, p. 'mqtt/0/#, javascript/#'",
+    "Empty: iobroker_sonoff_<instance>": "Vacío: iobroker_sonoff_<instancia>",
+    "External MQTT broker": "Broker MQTT externo",
+    "External broker URL": "URL del broker externo",
+    "External broker password": "Contraseña del broker externo",
+    "External broker user": "Usuario del broker externo",
     "For stat/RESULT": "Por stat/RESULT",
     "For tele/MARGINS": "Para tele/MARGINS",
     "For tele/SENSOR": "Por tele/SENSOR",
     "For tele/STATE": "Por tele/STATE",
+    "General settings": "Configuración general",
     "IP": "IP",
     "Ignore 'not connected' warnings": "Ignorar advertencias 'no conectadas'",
     "Ignore warnings with pingreq": "Ignore las advertencias con pingreq",
     "Interval before send topics by connection:": "Intervalo antes de enviar temas por conexión",
     "Interval in milliseconds for message retransmission": "Intervalo en milisegundos para la retransmisión de mensajes",
+    "Keepalive": "Keepalive",
     "Main settings": "Ajustes principales",
     "Mask to publish": "p.ej. 'mqtt.0.*, javascript.*'",
     "Mask to publish own states:": "Máscara para publicar estados propios",
     "Max topic length:": "Longitud máxima del nombre del tema",
     "Maximum number of retransmission attempts": "Número máximo de intentos de retransmisión",
+    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Opcional, p. ej. /opt/iobroker/certs/ca.crt",
+    "Optional, only for client certificate authentication": "Opcional, solo para la autenticación con certificado de cliente",
     "Other settings": "Otros ajustes",
     "Password confirmation:": "confirmación de contraseña",
     "Password:": "Contraseña",
+    "Path to the CA certificate": "Ruta al certificado CA",
+    "Path to the client certificate": "Ruta al certificado de cliente",
+    "Path to the client key": "Ruta a la clave de cliente",
     "Patterns:": "Suscribir patrones",
     "Port:": "Puerto",
     "Prefix for topics:": "Prefijo para todos los temas",
@@ -52,38 +72,20 @@
     "Suppress warnings when commands are sent to offline devices": "Suprima las advertencias cuando los comandos se envían a dispositivos fuera de línea",
     "Test connection": "Prueba de conexión con el servidor",
     "Time in minutes to store client information": "Tiempo en minutos para almacenar la información del cliente",
+    "Topics to subscribe": "Topics a suscribir",
     "Trace output for every message:": "Salida de seguimiento para cada mensaje",
     "Type:": "Tipo",
     "URL:": "URL",
     "Use WebSockets:": "Use WebSockets también",
     "Use chunk patch:": "Use el fragmento de fragmento",
     "Use different topic names for set and get:": "Use diferentes nombres de tema para establecer y obtener",
+    "Use external MQTT broker": "Usar broker MQTT externo",
     "User:": "Usuario",
     "WARNING! Check README.md!": "¡ADVERTENCIA! ¡Compruebe README.md!",
-    "External MQTT broker": "Broker MQTT externo",
-    "Use external MQTT broker": "Usar broker MQTT externo",
-    "Disables the built-in MQTT server and connects as client to an external broker": "Desactiva el servidor MQTT integrado y se conecta como cliente a un broker externo",
-    "External broker URL": "URL del broker externo",
-    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "ej. mqtt://192.168.1.100:1883 o mqtts://broker:8883",
-    "External broker user": "Usuario del broker externo",
-    "External broker password": "Contraseña del broker externo",
-    "Topics to subscribe": "Topics a suscribir",
-    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Lista separada por comas. FullTopic estándar: tele/#, stat/# - dispositivo primero: +/tele/+, +/stat/+",
-    "Client ID": "ID de cliente",
-    "Empty: iobroker_sonoff_<instance>": "Vacío: iobroker_sonoff_<instancia>",
-    "Keepalive": "Keepalive",
-    "sec": "s",
-    "Clean session": "Sesión limpia",
-    "Deactivate it, so the broker stores the messages while the adapter is not running": "Desactívelo para que el broker almacene los mensajes mientras el adaptador no se está ejecutando",
-    "Check the certificate of the broker": "Comprobar el certificado del broker",
-    "Deactivate it for self-signed certificates": "Desactívelo para certificados autofirmados",
-    "Path to the CA certificate": "Ruta al certificado CA",
-    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Opcional, p. ej. /opt/iobroker/certs/ca.crt",
-    "Path to the client certificate": "Ruta al certificado de cliente",
-    "Optional, only for client certificate authentication": "Opcional, solo para la autenticación con certificado de cliente",
-    "Path to the client key": "Ruta a la clave de cliente",
     "Without URL the built-in MQTT server will be started": "Sin URL se iniciará el servidor MQTT integrado",
     "chars": "caracteres",
     "connected": "conectado",
-    "ms": "Sra"
-}
+    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "ej. mqtt://192.168.1.100:1883 o mqtts://broker:8883",
+    "ms": "Sra",
+    "sec": "s"
+}

package/admin/i18n/fr.json

@@ -4,32 +4,52 @@
     "Authentication settings": "Paramètres d'authentification",
     "Auto creation of states": "Création automatique d'états",
     "Chained certificate:": "Certificat chaîné",
+    "Check the certificate of the broker": "Vérifier le certificat du broker",
+    "Clean session": "Session propre",
     "Client": "Client/abonné",
+    "Client ID": "ID client",
     "Client ID:": "identité du client",
     "Client timeout": "Délai d'expiration du client",
+    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Liste séparée par des virgules. FullTopic standard : tele/#, stat/# - appareil en premier : +/tele/+, +/stat/+",
     "Connection": "Connexion",
     "Connection settings": "Paramètres de connexion",
     "Create object tree": "Créer une arborescence d'objets",
+    "Deactivate it for self-signed certificates": "Désactivez-le pour les certificats auto-signés",
+    "Deactivate it, so the broker stores the messages while the adapter is not running": "Désactivez-le pour que le broker conserve les messages pendant que l'adaptateur ne fonctionne pas",
     "Default QoS": "QoS par défaut",
     "Default Quality of Service level (0, 1, or 2)": "Niveau de service par défaut (0, 1 ou 2)",
+    "Device manager": "Gestionnaire d’appareils",
+    "Disables the built-in MQTT server and connects as client to an external broker": "Désactive le serveur MQTT intégré et se connecte en tant que client à un broker externe",
     "Divided by comma": "Divisé par une virgule, par ex. 'mqtt/0/#, javascript/#'",
+    "Empty: iobroker_sonoff_<instance>": "Vide : iobroker_sonoff_<instance>",
+    "External MQTT broker": "Broker MQTT externe",
+    "External broker URL": "URL du broker externe",
+    "External broker password": "Mot de passe du broker externe",
+    "External broker user": "Utilisateur du broker externe",
     "For stat/RESULT": "Pour stat/RESULT",
     "For tele/MARGINS": "Pour tele/MARGINS",
     "For tele/SENSOR": "Pour tele/SENSOR",
     "For tele/STATE": "Pour tele/STATE",
+    "General settings": "Réglages généraux",
     "IP": "IP",
     "Ignore 'not connected' warnings": "Ignorer les avertissements 'non connecté'",
     "Ignore warnings with pingreq": "Ignorer les avertissements avec pingreq",
     "Interval before send topics by connection:": "Intervalle avant d'envoyer des sujets par connexion",
     "Interval in milliseconds for message retransmission": "Intervalle en millisecondes pour la retransmission des messages",
+    "Keepalive": "Keepalive",
     "Main settings": "Réglages principaux",
     "Mask to publish": "par exemple. 'mqtt.0.*, javascript.*'",
     "Mask to publish own states:": "Masque pour publier ses propres états",
     "Max topic length:": "Longueur maximale du nom de la rubrique",
     "Maximum number of retransmission attempts": "Nombre maximum de tentatives de retransmission",
+    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Facultatif, p.ex. /opt/iobroker/certs/ca.crt",
+    "Optional, only for client certificate authentication": "Facultatif, uniquement pour l'authentification par certificat client",
     "Other settings": "Autres réglages",
     "Password confirmation:": "Confirmation mot de passe",
     "Password:": "Mot de passe",
+    "Path to the CA certificate": "Chemin vers le certificat CA",
+    "Path to the client certificate": "Chemin vers le certificat client",
+    "Path to the client key": "Chemin vers la clé client",
     "Patterns:": "Modèles de souscription",
     "Port:": "Port",
     "Prefix for topics:": "Préfixe pour tous les sujets",
@@ -52,38 +72,20 @@
     "Suppress warnings when commands are sent to offline devices": "Supprimer les avertissements lorsque les commandes sont envoyées sur des appareils hors ligne",
     "Test connection": "Tester la connexion avec le serveur",
     "Time in minutes to store client information": "Il est temps en quelques minutes pour stocker les informations du client",
+    "Topics to subscribe": "Topics à souscrire",
     "Trace output for every message:": "Trace de sortie pour chaque message",
     "Type:": "Type",
     "URL:": "URL",
     "Use WebSockets:": "Utilisez aussi WebSockets",
     "Use chunk patch:": "Utiliser un patch de morceau",
     "Use different topic names for set and get:": "Utilisez différents noms de sujet pour définir et obtenir",
+    "Use external MQTT broker": "Utiliser un broker MQTT externe",
     "User:": "Utilisateur",
     "WARNING! Check README.md!": "AVERTISSEMENT! Vérifiez README.md!",
-    "External MQTT broker": "Broker MQTT externe",
-    "Use external MQTT broker": "Utiliser un broker MQTT externe",
-    "Disables the built-in MQTT server and connects as client to an external broker": "Désactive le serveur MQTT intégré et se connecte en tant que client à un broker externe",
-    "External broker URL": "URL du broker externe",
-    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "ex. mqtt://192.168.1.100:1883 ou mqtts://broker:8883",
-    "External broker user": "Utilisateur du broker externe",
-    "External broker password": "Mot de passe du broker externe",
-    "Topics to subscribe": "Topics à souscrire",
-    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Liste séparée par des virgules. FullTopic standard : tele/#, stat/# - appareil en premier : +/tele/+, +/stat/+",
-    "Client ID": "ID client",
-    "Empty: iobroker_sonoff_<instance>": "Vide : iobroker_sonoff_<instance>",
-    "Keepalive": "Keepalive",
-    "sec": "s",
-    "Clean session": "Session propre",
-    "Deactivate it, so the broker stores the messages while the adapter is not running": "Désactivez-le pour que le broker conserve les messages pendant que l'adaptateur ne fonctionne pas",
-    "Check the certificate of the broker": "Vérifier le certificat du broker",
-    "Deactivate it for self-signed certificates": "Désactivez-le pour les certificats auto-signés",
-    "Path to the CA certificate": "Chemin vers le certificat CA",
-    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Facultatif, p.ex. /opt/iobroker/certs/ca.crt",
-    "Path to the client certificate": "Chemin vers le certificat client",
-    "Optional, only for client certificate authentication": "Facultatif, uniquement pour l'authentification par certificat client",
-    "Path to the client key": "Chemin vers la clé client",
     "Without URL the built-in MQTT server will be started": "Sans URL, le serveur MQTT intégré sera démarré",
     "chars": "chars",
     "connected": "connecté",
-    "ms": "Mme"
-}
+    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "ex. mqtt://192.168.1.100:1883 ou mqtts://broker:8883",
+    "ms": "Mme",
+    "sec": "s"
+}

package/admin/i18n/it.json

@@ -4,32 +4,52 @@
     "Authentication settings": "Impostazioni di autenticazione",
     "Auto creation of states": "Creazione automatica di stati",
     "Chained certificate:": "Certificato incatenato",
+    "Check the certificate of the broker": "Verificare il certificato del broker",
+    "Clean session": "Sessione pulita",
     "Client": "Client/abbonato",
+    "Client ID": "ID client",
     "Client ID:": "Identificativo cliente",
     "Client timeout": "Timeout del cliente",
+    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Elenco separato da virgole. FullTopic standard: tele/#, stat/# - dispositivo per primo: +/tele/+, +/stat/+",
     "Connection": "Connessione",
     "Connection settings": "Impostazioni di connessione",
     "Create object tree": "Crea l'albero degli oggetti",
+    "Deactivate it for self-signed certificates": "Disattivalo per i certificati autofirmati",
+    "Deactivate it, so the broker stores the messages while the adapter is not running": "Disattivalo affinché il broker memorizzi i messaggi mentre l'adattatore non è in esecuzione",
     "Default QoS": "QoS predefinito",
     "Default Quality of Service level (0, 1, or 2)": "Qualità predefinita del livello di servizio (0, 1 o 2)",
+    "Device manager": "Gestore dispositivi",
+    "Disables the built-in MQTT server and connects as client to an external broker": "Disabilita il server MQTT integrato e si connette come client a un broker esterno",
     "Divided by comma": "Diviso in virgola, ad es. 'MQTT/0/#, JavaScript/#'",
+    "Empty: iobroker_sonoff_<instance>": "Vuoto: iobroker_sonoff_<istanza>",
+    "External MQTT broker": "Broker MQTT esterno",
+    "External broker URL": "URL del broker esterno",
+    "External broker password": "Password del broker esterno",
+    "External broker user": "Utente del broker esterno",
     "For stat/RESULT": "Per stat/RESULT",
     "For tele/MARGINS": "Per tele/MARGINS",
     "For tele/SENSOR": "Per tele/SENSOR",
     "For tele/STATE": "Per tele/STATE",
+    "General settings": "Impostazioni generali",
     "IP": "IP",
     "Ignore 'not connected' warnings": "Ignora gli avvisi \"non connessi\"",
     "Ignore warnings with pingreq": "Ignora gli avvisi con pingreq",
     "Interval before send topics by connection:": "Intervallo prima di inviare argomenti per connessione",
     "Interval in milliseconds for message retransmission": "Intervallo in millisecondi per la ritrasmissione dei messaggi",
+    "Keepalive": "Keepalive",
     "Main settings": "Impostazioni principali",
     "Mask to publish": "per esempio. 'Mqtt.0. *, Javascript. *'",
     "Mask to publish own states:": "Maschera per pubblicare i propri stati",
     "Max topic length:": "Lunghezza massima del nome dell'argomento",
     "Maximum number of retransmission attempts": "Numero massimo di tentativi di ritrasmissione",
+    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Facoltativo, ad es. /opt/iobroker/certs/ca.crt",
+    "Optional, only for client certificate authentication": "Facoltativo, solo per l'autenticazione con certificato client",
     "Other settings": "Altre impostazioni",
     "Password confirmation:": "conferma password",
     "Password:": "Parola d'ordine",
+    "Path to the CA certificate": "Percorso del certificato CA",
+    "Path to the client certificate": "Percorso del certificato client",
+    "Path to the client key": "Percorso della chiave client",
     "Patterns:": "Iscriviti modelli",
     "Port:": "Porta",
     "Prefix for topics:": "Prefisso per tutti gli argomenti",
@@ -52,38 +72,20 @@
     "Suppress warnings when commands are sent to offline devices": "Sopprimere gli avvisi quando i comandi vengono inviati a dispositivi offline",
     "Test connection": "Verifica la connessione con il server",
     "Time in minutes to store client information": "Tempo in pochi minuti per archiviare le informazioni sui clienti",
+    "Topics to subscribe": "Topic da sottoscrivere",
     "Trace output for every message:": "Traccia l'output per ogni messaggio",
     "Type:": "genere",
     "URL:": "URL",
     "Use WebSockets:": "Utilizza anche WebSockets",
     "Use chunk patch:": "Usa patch pezzo",
     "Use different topic names for set and get:": "Usa diversi nomi di argomenti per impostare e ottenere",
+    "Use external MQTT broker": "Usa broker MQTT esterno",
     "User:": "Utente",
     "WARNING! Check README.md!": "AVVERTIMENTO! Controlla README.md!",
-    "External MQTT broker": "Broker MQTT esterno",
-    "Use external MQTT broker": "Usa broker MQTT esterno",
-    "Disables the built-in MQTT server and connects as client to an external broker": "Disabilita il server MQTT integrato e si connette come client a un broker esterno",
-    "External broker URL": "URL del broker esterno",
-    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "es. mqtt://192.168.1.100:1883 o mqtts://broker:8883",
-    "External broker user": "Utente del broker esterno",
-    "External broker password": "Password del broker esterno",
-    "Topics to subscribe": "Topic da sottoscrivere",
-    "Comma separated list. Standard full topic: tele/#, stat/# - device first: +/tele/+, +/stat/+": "Elenco separato da virgole. FullTopic standard: tele/#, stat/# - dispositivo per primo: +/tele/+, +/stat/+",
-    "Client ID": "ID client",
-    "Empty: iobroker_sonoff_<instance>": "Vuoto: iobroker_sonoff_<istanza>",
-    "Keepalive": "Keepalive",
-    "sec": "s",
-    "Clean session": "Sessione pulita",
-    "Deactivate it, so the broker stores the messages while the adapter is not running": "Disattivalo affinché il broker memorizzi i messaggi mentre l'adattatore non è in esecuzione",
-    "Check the certificate of the broker": "Verificare il certificato del broker",
-    "Deactivate it for self-signed certificates": "Disattivalo per i certificati autofirmati",
-    "Path to the CA certificate": "Percorso del certificato CA",
-    "Optional, e.g. /opt/iobroker/certs/ca.crt": "Facoltativo, ad es. /opt/iobroker/certs/ca.crt",
-    "Path to the client certificate": "Percorso del certificato client",
-    "Optional, only for client certificate authentication": "Facoltativo, solo per l'autenticazione con certificato client",
-    "Path to the client key": "Percorso della chiave client",
     "Without URL the built-in MQTT server will be started": "Senza URL verrà avviato il server MQTT integrato",
     "chars": "caratteri",
     "connected": "collegato",
-    "ms": "Signorina"
-}
+    "e.g. mqtt://192.168.1.100:1883 or mqtts://broker:8883": "es. mqtt://192.168.1.100:1883 o mqtts://broker:8883",
+    "ms": "Signorina",
+    "sec": "s"
+}