iobroker.solarviewdatareader 1.0.7 → 1.1.0

package/LICENSE

@@ -1,6 +1,6 @@
 MIT License
 
-Copyright (c) 2019-2022 Achim Fürhoff <achim.fuerhoff@outlook.de>
+Copyright (c) 2019-2024 Achim Fürhoff <achim.fuerhoff@outlook.de>
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

package/README.md

@@ -60,10 +60,17 @@ UL3, IL3 = mains voltage, mains power phase 3
 TKK= Temperature inverter
 
 ## Changelog
-<!--
-	Placeholder for the next version (at the beginning of the line):
-	### __WORK IN PROGRESS__
--->
+### 1.1.0 (2024-05-29)
+* (afuerhoff) code optimizations
+* (afuerhoff) jsonConfig added
+* (afuerhoff) dependencies updated
+* (afuerhoff) node >= 18, js-controller >= 5.0.19
+* (afuerhoff) admin >= 6.17.13 due to timePicker failure
+
+### 1.0.8 (2024-01-18)
+* (afuerhoff) dependencies updated
+* (afuerhoff) translations updated
+
 ### 1.0.7 (2022-12-21)
 * (afuerhoff) dependencies updated
 
@@ -77,17 +84,10 @@ TKK= Temperature inverter
 * (afuerhoff) test and release updated
 * (afuerhoff) smaller changes
 
-### 1.0.4 (2022-02-09)
-* (afuerhoff) dependencies updated
-* (afuerhoff) issue #20 fixed
-
-### 1.0.3 (2021-12-08)
-* (afuerhoff) dependencies updated
-
 ## License
 MIT License
 
-Copyright (c) 2019-2022 Achim Fürhoff <achim.fuerhoff@outlook.de>
+Copyright (c) 2019-2024 Achim Fürhoff <achim.fuerhoff@outlook.de>
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

package/admin/i18n/de/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Hier können Sie das Polling-Intervall festlegen [zwischen 10 bis 3600 Sekunden]",
+    "IP-Address": "IP Adresse",
+    "Interval": "Intervall",
+    "Interval end": "Intervallende",
+    "Interval start": "Intervallstart",
+    "Inverter 1": "Wechselrichter 1",
+    "Inverter 2": "Wechselrichter 2",
+    "Inverter 3": "Wechselrichter 3",
+    "Inverter 4": "Wechselrichter 4",
+    "Please check if inverter 1 available": "Bitte prüfen Sie, ob Wechselrichter 1 verfügbar ist",
+    "Please check if inverter 2 available": "Bitte prüfen Sie, ob Wechselrichter 2 verfügbar ist",
+    "Please check if inverter 3 available": "Bitte prüfen Sie, ob Wechselrichter 3 verfügbar ist",
+    "Please check if inverter 4 available": "Bitte prüfen Sie, ob Wechselrichter 4 verfügbar ist",
+    "Please check if self consumption meter 1 is available": "Bitte prüfen Sie, ob der Eigenverbrauchsmesser 1 verfügbar ist",
+    "Please check if self consumption meter 2 is available": "Bitte prüfen Sie, ob der Eigenverbrauchsmesser 2 verfügbar ist",
+    "Please check if self consumption meter 3 is available": "Bitte prüfen Sie, ob der Eigenverbrauchsmesser 3 verfügbar ist",
+    "Please check if self consumption meter 4 is available": "Bitte prüfen Sie, ob der Eigenverbrauchsmesser 4 verfügbar ist",
+    "Please check if you use the self consumption meter sum": "Bitte überprüfen Sie, ob Sie die Selbstverbrauchsmessersumme verwenden",
+    "Please check if you want to set a system variable in the CCU": "Bitte prüfen Sie, ob Sie eine Systemvariable in der CCU setzen möchten",
+    "Please enter if you have a d0-converter": "Bitte geben Sie an, ob Sie einen d0-Konverter haben",
+    "Please enter the CCU system variable": "Bitte geben Sie die CCU-Systemvariable ein",
+    "Please enter the IP-Address from your SolarView data logger": "Bitte geben Sie die IP-Adresse Ihres SolarView-Datenloggers ein",
+    "Please enter the interval (cron format)": "Bitte geben Sie das Intervall ein (Cron-Format)",
+    "Please enter the interval end (e.g. 23:59)": "Bitte geben Sie das Intervallende ein (z. B. 23:59).",
+    "Please enter the interval start (e.g. 00:00)": "Bitte geben Sie den Intervallstart ein (z. B. 00:00).",
+    "Please enter the port": "Bitte geben Sie den Port ein",
+    "Self consumption meter 1": "Eigenverbrauchsmesser 1",
+    "Self consumption meter 2": "Eigenverbrauchsmesser 2",
+    "Self consumption meter 3": "Eigenverbrauchsmesser 3",
+    "Self consumption meter 4": "Eigenverbrauchsmesser 4",
+    "Self consumption meter sum": "Eigenverbrauchsmesser Summe",
+    "Set system variable CCU": "Systemvariable CCU setzen",
+    "SolarView Logger": "SolarView Logger",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView ist ein Datenlogger für mehrere Wechselrichter. ",
+    "System variable": "Systemvariable",
+    "System variable e.g. hm-rega.0.12345": "Systemvariable z.B. hm-rega.0.12345",
+    "polling interval in seconds": "Abfrageintervall in Sekunden",
+    "solarviewdatareader adapter settings": "Adaptereinstellungen für solarviewdatareader"
+}

package/admin/i18n/en/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Here you can define the polling interval [between 10 to 3600 seconds]",
+    "IP-Address": "IP-Address",
+    "Interval": "Interval",
+    "Interval end": "Interval end",
+    "Interval start": "Interval start",
+    "Inverter 1": "Inverter 1",
+    "Inverter 2": "Inverter 2",
+    "Inverter 3": "Inverter 3",
+    "Inverter 4": "Inverter 4",
+    "Please check if inverter 1 available": "Please check if inverter 1 available",
+    "Please check if inverter 2 available": "Please check if inverter 2 available",
+    "Please check if inverter 3 available": "Please check if inverter 3 available",
+    "Please check if inverter 4 available": "Please check if inverter 4 available",
+    "Please check if self consumption meter 1 is available": "Please check if self consumption meter 1 is available",
+    "Please check if self consumption meter 2 is available": "Please check if self consumption meter 2 is available",
+    "Please check if self consumption meter 3 is available": "Please check if self consumption meter 3 is available",
+    "Please check if self consumption meter 4 is available": "Please check if self consumption meter 4 is available",
+    "Please check if you use the self consumption meter sum": "Please check if you use the self consumption meter sum",
+    "Please check if you want to set a system variable in the CCU": "Please check if you want to set a system variable in the CCU",
+    "Please enter if you have a d0-converter": "Please enter if you have a d0-converter",
+    "Please enter the CCU system variable": "Please enter the CCU system variable",
+    "Please enter the IP-Address from your SolarView data logger": "Please enter the IP-Address from your SolarView data logger",
+    "Please enter the interval (cron format)": "Please enter the interval (cron format)",
+    "Please enter the interval end (e.g. 23:59)": "Please enter the interval end (e.g. 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Please enter the interval start (e.g. 00:00)",
+    "Please enter the port": "Please enter the port",
+    "Self consumption meter 1": "Self consumption meter 1",
+    "Self consumption meter 2": "Self consumption meter 2",
+    "Self consumption meter 3": "Self consumption meter 3",
+    "Self consumption meter 4": "Self consumption meter 4",
+    "Self consumption meter sum": "Self consumption meter sum",
+    "Set system variable CCU": "Set system variable CCU",
+    "SolarView Logger": "SolarView Logger",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView is a data logger for several inverter. Further informations can be get over the link.",
+    "System variable": "System variable",
+    "System variable e.g. hm-rega.0.12345": "System variable e.g. hm-rega.0.12345",
+    "polling interval in seconds": "polling interval in seconds",
+    "solarviewdatareader adapter settings": "Adapter settings for solarviewdatareader"
+}

package/admin/i18n/es/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Aquí puede definir el intervalo de sondeo [entre 10 y 3600 segundos]",
+    "IP-Address": "Dirección IP",
+    "Interval": "Intervalo",
+    "Interval end": "Fin de intervalo",
+    "Interval start": "Inicio de intervalo",
+    "Inverter 1": "Inversor 1",
+    "Inverter 2": "Inversor 2",
+    "Inverter 3": "Inversor 3",
+    "Inverter 4": "Inversor 4",
+    "Please check if inverter 1 available": "Por favor, compruebe si el inversor 1 disponible",
+    "Please check if inverter 2 available": "Por favor, compruebe si el inversor 2 está disponible",
+    "Please check if inverter 3 available": "Por favor verifica si el inversor 3 está disponible.",
+    "Please check if inverter 4 available": "Por favor, compruebe si el inversor 4 está disponible.",
+    "Please check if self consumption meter 1 is available": "Compruebe si el medidor de autoconsumo 1 está disponible",
+    "Please check if self consumption meter 2 is available": "Compruebe si el medidor de autoconsumo 2 está disponible",
+    "Please check if self consumption meter 3 is available": "Compruebe si el medidor de autoconsumo 3 está disponible",
+    "Please check if self consumption meter 4 is available": "Compruebe si el medidor de autoconsumo 4 está disponible",
+    "Please check if you use the self consumption meter sum": "Compruebe si usa la suma del medidor de autoconsumo",
+    "Please check if you want to set a system variable in the CCU": "Por favor, compruebe si desea establecer una variable de sistema en la CCU",
+    "Please enter if you have a d0-converter": "Por favor ingresa si tienes un convertidor d0",
+    "Please enter the CCU system variable": "Por favor ingrese la variable de sistema CCU",
+    "Please enter the IP-Address from your SolarView data logger": "Introduzca la dirección IP de su registrador de datos SolarView",
+    "Please enter the interval (cron format)": "Por favor ingrese el intervalo (formato cron)",
+    "Please enter the interval end (e.g. 23:59)": "Ingrese el final del intervalo (por ejemplo, 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Introduzca el inicio del intervalo (p. Ej., 00:00)",
+    "Please enter the port": "Por favor ingrese el puerto",
+    "Self consumption meter 1": "Medidor de autoconsumo 1",
+    "Self consumption meter 2": "Medidor de autoconsumo 2",
+    "Self consumption meter 3": "Medidor de autoconsumo 3",
+    "Self consumption meter 4": "Medidor de autoconsumo 4",
+    "Self consumption meter sum": "Suma del medidor de autoconsumo",
+    "Set system variable CCU": "Establecer variable de sistema CCU",
+    "SolarView Logger": "Registrador SolarView",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView es un registrador de datos para varios inversores. ",
+    "System variable": "Variable del sistema",
+    "System variable e.g. hm-rega.0.12345": "Variable del sistema, p. hm-rega.0.12345",
+    "polling interval in seconds": "intervalo de sondeo en segundos",
+    "solarviewdatareader adapter settings": "Ajustes del adaptador para solarviewdatareader"
+}

package/admin/i18n/fr/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Ici, vous pouvez définir l'intervalle d'interrogation [entre 10 et 3600 secondes]",
+    "IP-Address": "Adresse IP",
+    "Interval": "Intervalle",
+    "Interval end": "Fin d'intervalle",
+    "Interval start": "Début d'intervalle",
+    "Inverter 1": "Onduleur 1",
+    "Inverter 2": "Onduleur 2",
+    "Inverter 3": "Onduleur 3",
+    "Inverter 4": "Onduleur 4",
+    "Please check if inverter 1 available": "Veuillez vérifier si le convertisseur 1 est disponible",
+    "Please check if inverter 2 available": "Veuillez vérifier si l'onduleur 2 est disponible",
+    "Please check if inverter 3 available": "Veuillez vérifier si l'onduleur 3 est disponible",
+    "Please check if inverter 4 available": "Veuillez vérifier si l'inverseur 4 est disponible",
+    "Please check if self consumption meter 1 is available": "Veuillez vérifier si le compteur d'autoconsommation 1 est disponible",
+    "Please check if self consumption meter 2 is available": "Veuillez vérifier si le compteur d'autoconsommation 2 est disponible",
+    "Please check if self consumption meter 3 is available": "Veuillez vérifier si le compteur d'autoconsommation 3 est disponible",
+    "Please check if self consumption meter 4 is available": "Veuillez vérifier si le compteur d'autoconsommation 4 est disponible",
+    "Please check if you use the self consumption meter sum": "Veuillez vérifier si vous utilisez la somme du compteur d'autoconsommation",
+    "Please check if you want to set a system variable in the CCU": "Veuillez vérifier si vous souhaitez définir une variable système dans la CCU.",
+    "Please enter if you have a d0-converter": "S'il vous plaît entrer si vous avez un convertisseur d0",
+    "Please enter the CCU system variable": "Veuillez entrer la variable système CCU",
+    "Please enter the IP-Address from your SolarView data logger": "Veuillez saisir l'adresse IP de votre enregistreur de données SolarView.",
+    "Please enter the interval (cron format)": "S'il vous plaît entrer l'intervalle (format cron)",
+    "Please enter the interval end (e.g. 23:59)": "Veuillez saisir la fin de l'intervalle (par exemple 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Veuillez saisir le début de l'intervalle (par exemple 00:00)",
+    "Please enter the port": "S'il vous plaît entrer le port",
+    "Self consumption meter 1": "Compteur d'autoconsommation 1",
+    "Self consumption meter 2": "Compteur d'autoconsommation 2",
+    "Self consumption meter 3": "Compteur d'autoconsommation 3",
+    "Self consumption meter 4": "Compteur d'autoconsommation 4",
+    "Self consumption meter sum": "Somme du compteur d'autoconsommation",
+    "Set system variable CCU": "Définir la variable système CCU",
+    "SolarView Logger": "Enregistreur SolarView",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView est un enregistreur de données pour plusieurs onduleurs. ",
+    "System variable": "Variable système",
+    "System variable e.g. hm-rega.0.12345": "Variable système, par ex. hm-rega.0.12345",
+    "polling interval in seconds": "intervalle d'interrogation en secondes",
+    "solarviewdatareader adapter settings": "Paramètres d'adaptateur pour solarviewdatareader"
+}

package/admin/i18n/it/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Qui puoi definire l'intervallo di polling [tra 10 e 3600 secondi]",
+    "IP-Address": "Indirizzo IP",
+    "Interval": "Intervallo",
+    "Interval end": "Intervallo di fine",
+    "Interval start": "Inizio intervallo",
+    "Inverter 1": "Inverter 1",
+    "Inverter 2": "Inverter 2",
+    "Inverter 3": "Inverter 3",
+    "Inverter 4": "Inverter 4",
+    "Please check if inverter 1 available": "Si prega di verificare se l'inverter 1 è disponibile",
+    "Please check if inverter 2 available": "Si prega di verificare se l'inverter 2 è disponibile",
+    "Please check if inverter 3 available": "Si prega di verificare se l'inverter 3 è disponibile",
+    "Please check if inverter 4 available": "Si prega di verificare se l'inverter 4 è disponibile",
+    "Please check if self consumption meter 1 is available": "Si prega di verificare se il contatore di autoconsumo 1 è disponibile",
+    "Please check if self consumption meter 2 is available": "Si prega di verificare se il misuratore di autoconsumo 2 è disponibile",
+    "Please check if self consumption meter 3 is available": "Si prega di verificare se il misuratore di autoconsumo 3 è disponibile",
+    "Please check if self consumption meter 4 is available": "Verificare se è disponibile il contatore di autoconsumo 4",
+    "Please check if you use the self consumption meter sum": "Si prega di verificare se si utilizza la somma del contatore di autoconsumo",
+    "Please check if you want to set a system variable in the CCU": "Si prega di verificare se si desidera impostare una variabile di sistema nella CCU",
+    "Please enter if you have a d0-converter": "Si prega di inserire se si dispone di un convertitore d0",
+    "Please enter the CCU system variable": "Si prega di inserire la variabile di sistema CCU",
+    "Please enter the IP-Address from your SolarView data logger": "Inserisci l'indirizzo IP dal tuo data logger SolarView",
+    "Please enter the interval (cron format)": "Si prega di inserire l'intervallo (formato cron)",
+    "Please enter the interval end (e.g. 23:59)": "Inserisci la fine dell'intervallo (ad es. 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Si prega di inserire l'inizio dell'intervallo (es. 00:00)",
+    "Please enter the port": "Si prega di inserire il porto",
+    "Self consumption meter 1": "Indicatore di autoconsumo 1",
+    "Self consumption meter 2": "Contatore di autoconsumo 2",
+    "Self consumption meter 3": "Indicatore di autoconsumo 3",
+    "Self consumption meter 4": "Indicatore di autoconsumo 4",
+    "Self consumption meter sum": "Somma dei contatori di autoconsumo",
+    "Set system variable CCU": "Imposta CCU variabile di sistema",
+    "SolarView Logger": "Logger di SolarView",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView è un data logger per diversi inverter. ",
+    "System variable": "Variabile di sistema",
+    "System variable e.g. hm-rega.0.12345": "Variabile di sistema ad es. hm-rega.0.12345",
+    "polling interval in seconds": "intervallo di polling in secondi",
+    "solarviewdatareader adapter settings": "Impostazioni dell'adattatore per solarviewdatareader"
+}

package/admin/i18n/nl/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Hier kunt u het polling-interval definiëren [tussen 10 en 3600 seconden]",
+    "IP-Address": "IP adres",
+    "Interval": "Interval",
+    "Interval end": "Interval einde",
+    "Interval start": "Interval start",
+    "Inverter 1": "Omvormer 1",
+    "Inverter 2": "Omvormer 2",
+    "Inverter 3": "Omvormer 3",
+    "Inverter 4": "Omvormer 4",
+    "Please check if inverter 1 available": "Controleer of inverter 1 beschikbaar is",
+    "Please check if inverter 2 available": "Controleer of inverter 2 beschikbaar is",
+    "Please check if inverter 3 available": "Controleer of inverter 3 beschikbaar is",
+    "Please check if inverter 4 available": "Controleer of omvormer 4 beschikbaar is",
+    "Please check if self consumption meter 1 is available": "Controleer of meter 1 voor eigen verbruik beschikbaar is",
+    "Please check if self consumption meter 2 is available": "Controleer of meter 2 voor eigen verbruik beschikbaar is",
+    "Please check if self consumption meter 3 is available": "Controleer of meter 3 voor eigen verbruik beschikbaar is",
+    "Please check if self consumption meter 4 is available": "Controleer of zelfverbruiksmeter 4 beschikbaar is",
+    "Please check if you use the self consumption meter sum": "Controleer of u de som van de meter voor eigen verbruik gebruikt",
+    "Please check if you want to set a system variable in the CCU": "Controleer of u een systeemvariabele in de CCU wilt instellen",
+    "Please enter if you have a d0-converter": "Voer alstublieft in als u een d0-converter heeft",
+    "Please enter the CCU system variable": "Voer de CCU-systeemvariabele in",
+    "Please enter the IP-Address from your SolarView data logger": "Voer het IP-adres in vanuit uw SolarView datalogger",
+    "Please enter the interval (cron format)": "Voer het interval in (cron-formaat)",
+    "Please enter the interval end (e.g. 23:59)": "Voer het einde van het interval in (bijv. 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Voer de intervalstart in (bijv. 00:00)",
+    "Please enter the port": "Voer de poort in",
+    "Self consumption meter 1": "Eigen verbruik meter 1",
+    "Self consumption meter 2": "Eigen verbruik meter 2",
+    "Self consumption meter 3": "Eigen verbruik meter 3",
+    "Self consumption meter 4": "Eigen verbruik meter 4",
+    "Self consumption meter sum": "Som van het eigen verbruik",
+    "Set system variable CCU": "Stel systeemvariabele CCU in",
+    "SolarView Logger": "SolarView Logger",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView is een datalogger voor verschillende omvormers. ",
+    "System variable": "Systeemvariabele",
+    "System variable e.g. hm-rega.0.12345": "Systeemvariabele, b.v. hm-rega.0.12345",
+    "polling interval in seconds": "polling-interval in seconden",
+    "solarviewdatareader adapter settings": "Adapterinstellingen voor solarviewdatareader"
+}

package/admin/i18n/pl/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Tutaj możesz zdefiniować interwał odpytywania [od 10 do 3600 sekund]",
+    "IP-Address": "Adres IP",
+    "Interval": "Interwał",
+    "Interval end": "Koniec interwału",
+    "Interval start": "Początek przerwy",
+    "Inverter 1": "Falownik 1",
+    "Inverter 2": "Falownik 2",
+    "Inverter 3": "Falownik 3",
+    "Inverter 4": "Falownik 4",
+    "Please check if inverter 1 available": "Sprawdź, czy dostępny jest falownik 1",
+    "Please check if inverter 2 available": "Sprawdź, czy dostępny jest falownik 2",
+    "Please check if inverter 3 available": "Sprawdź, czy dostępny jest falownik 3",
+    "Please check if inverter 4 available": "Sprawdź, czy dostępny jest falownik 4",
+    "Please check if self consumption meter 1 is available": "Sprawdź, czy miernik zużycia własnego 1 jest dostępny",
+    "Please check if self consumption meter 2 is available": "Sprawdź, czy miernik zużycia własnego 2 jest dostępny",
+    "Please check if self consumption meter 3 is available": "Sprawdź, czy miernik zużycia własnego 3 jest dostępny",
+    "Please check if self consumption meter 4 is available": "Sprawdź, czy miernik zużycia własnego 4 jest dostępny",
+    "Please check if you use the self consumption meter sum": "Sprawdź, czy używasz sumy licznika zużycia własnego",
+    "Please check if you want to set a system variable in the CCU": "Sprawdź, czy chcesz ustawić zmienną systemową w CCU",
+    "Please enter if you have a d0-converter": "Wprowadź, jeśli masz konwerter d0",
+    "Please enter the CCU system variable": "Wprowadź zmienną systemową CCU",
+    "Please enter the IP-Address from your SolarView data logger": "Wprowadź adres IP z rejestratora danych SolarView",
+    "Please enter the interval (cron format)": "Wprowadź interwał (format cron)",
+    "Please enter the interval end (e.g. 23:59)": "Wprowadź koniec interwału (np. 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Wprowadź początek interwału (np. 00:00)",
+    "Please enter the port": "Proszę wejść do portu",
+    "Self consumption meter 1": "Licznik zużycia własnego 1",
+    "Self consumption meter 2": "Licznik zużycia własnego 2",
+    "Self consumption meter 3": "Licznik zużycia własnego 3",
+    "Self consumption meter 4": "Licznik zużycia własnego 4",
+    "Self consumption meter sum": "Suma licznika zużycia własnego",
+    "Set system variable CCU": "Ustaw zmienną systemową CCU",
+    "SolarView Logger": "SolarView Logger",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView to rejestrator danych dla kilku falowników. ",
+    "System variable": "Zmienna systemowa",
+    "System variable e.g. hm-rega.0.12345": "Zmienna systemowa, np. hm-rega.0.12345",
+    "polling interval in seconds": "interwał odpytywania w sekundach",
+    "solarviewdatareader adapter settings": "Ustawienia adaptera dla solarviewdatareader"
+}

package/admin/i18n/pt/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Aqui você pode definir o intervalo de sondagem [entre 10 a 3600 segundos]",
+    "IP-Address": "Endereço de IP",
+    "Interval": "Intervalo",
+    "Interval end": "Fim do intervalo",
+    "Interval start": "Início do intervalo",
+    "Inverter 1": "Inversor 1",
+    "Inverter 2": "Inversor 2",
+    "Inverter 3": "Inversor 3",
+    "Inverter 4": "Inversor 4",
+    "Please check if inverter 1 available": "Por favor, verifique se o inversor 1 está disponível",
+    "Please check if inverter 2 available": "Por favor, verifique se o inversor 2 está disponível",
+    "Please check if inverter 3 available": "Por favor, verifique se o inversor 3 está disponível",
+    "Please check if inverter 4 available": "Por favor, verifique se o inversor 4 está disponível",
+    "Please check if self consumption meter 1 is available": "Verifique se o medidor de autoconsumo 1 está disponível",
+    "Please check if self consumption meter 2 is available": "Verifique se o medidor de autoconsumo 2 está disponível",
+    "Please check if self consumption meter 3 is available": "Verifique se o medidor de autoconsumo 3 está disponível",
+    "Please check if self consumption meter 4 is available": "Verifique se o medidor de autoconsumo 4 está disponível",
+    "Please check if you use the self consumption meter sum": "Verifique se você usa a soma do medidor de autoconsumo",
+    "Please check if you want to set a system variable in the CCU": "Por favor, verifique se você deseja definir uma variável de sistema no CCU",
+    "Please enter if you have a d0-converter": "Por favor, digite se você tem um conversor de d0",
+    "Please enter the CCU system variable": "Por favor insira a variável do sistema CCU",
+    "Please enter the IP-Address from your SolarView data logger": "Por favor, digite o endereço IP do seu data logger SolarView",
+    "Please enter the interval (cron format)": "Por favor insira o intervalo (formato cron)",
+    "Please enter the interval end (e.g. 23:59)": "Insira o fim do intervalo (por exemplo, 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Insira o início do intervalo (por exemplo, 00:00)",
+    "Please enter the port": "Por favor, insira o porto",
+    "Self consumption meter 1": "Medidor de auto consumo 1",
+    "Self consumption meter 2": "Medidor de autoconsumo 2",
+    "Self consumption meter 3": "Medidor de autoconsumo 3",
+    "Self consumption meter 4": "Medidor de autoconsumo 4",
+    "Self consumption meter sum": "Soma de medidor de autoconsumo",
+    "Set system variable CCU": "Definir CCU da variável do sistema",
+    "SolarView Logger": "Logger SolarView",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "O SolarView é um data logger para vários inversores. ",
+    "System variable": "Variável do sistema",
+    "System variable e.g. hm-rega.0.12345": "Variável do sistema, por ex. hm-rega.0.12345",
+    "polling interval in seconds": "intervalo de sondagem em segundos",
+    "solarviewdatareader adapter settings": "Configurações do adaptador para solarviewdatareader"
+}

package/admin/i18n/ru/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Здесь вы можете определить интервал опроса [от 10 до 3600 секунд]",
+    "IP-Address": "Айпи адрес",
+    "Interval": "интервал",
+    "Interval end": "Конец интервала",
+    "Interval start": "Интервальный старт",
+    "Inverter 1": "Инвертор 1",
+    "Inverter 2": "Инвертор 2",
+    "Inverter 3": "Инвертор 3",
+    "Inverter 4": "Инвертор 4",
+    "Please check if inverter 1 available": "Пожалуйста, проверьте, доступен ли инвертор 1",
+    "Please check if inverter 2 available": "Пожалуйста, проверьте, доступен ли инвертор 2",
+    "Please check if inverter 3 available": "Пожалуйста, проверьте, доступен ли инвертор 3",
+    "Please check if inverter 4 available": "Пожалуйста, проверьте, если инвертор 4 доступен",
+    "Please check if self consumption meter 1 is available": "Пожалуйста, проверьте, доступен ли счетчик 1",
+    "Please check if self consumption meter 2 is available": "Пожалуйста, проверьте, доступен ли счетчик потребления 2",
+    "Please check if self consumption meter 3 is available": "Пожалуйста, проверьте, доступен ли счетчик 3",
+    "Please check if self consumption meter 4 is available": "Пожалуйста, проверьте, доступен ли счетчик 4",
+    "Please check if you use the self consumption meter sum": "Пожалуйста, проверьте, если вы используете сумму счетчика самопотребления",
+    "Please check if you want to set a system variable in the CCU": "Проверьте, хотите ли вы установить системную переменную в CCU",
+    "Please enter if you have a d0-converter": "Пожалуйста, введите, если у вас есть d0-конвертер",
+    "Please enter the CCU system variable": "Пожалуйста, введите системную переменную CCU",
+    "Please enter the IP-Address from your SolarView data logger": "Пожалуйста, введите IP-адрес из вашего регистратора данных SolarView",
+    "Please enter the interval (cron format)": "Пожалуйста, введите интервал (cron формат)",
+    "Please enter the interval end (e.g. 23:59)": "Введите конец интервала (например, 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Введите начало интервала (например, 00:00)",
+    "Please enter the port": "Пожалуйста, введите порт",
+    "Self consumption meter 1": "Счетчик собственного потребления 1",
+    "Self consumption meter 2": "Счетчик собственного потребления 2",
+    "Self consumption meter 3": "Счетчик собственного потребления 3",
+    "Self consumption meter 4": "Счетчик собственного потребления 4",
+    "Self consumption meter sum": "Сумма счетчика собственного потребления",
+    "Set system variable CCU": "Установить системную переменную CCU",
+    "SolarView Logger": "SolarView Logger",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView - это регистратор данных для нескольких инверторов. ",
+    "System variable": "Системная переменная",
+    "System variable e.g. hm-rega.0.12345": "Системная переменная, например. хм-rega.0.12345",
+    "polling interval in seconds": "интервал опроса в секундах",
+    "solarviewdatareader adapter settings": "Настройки адаптера для solarviewdatareader"
+}

package/admin/i18n/uk/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "Тут ви можете визначити інтервал опитування [від 10 до 3600 секунд]",
+    "IP-Address": "IP-адреса",
+    "Interval": "Інтервал",
+    "Interval end": "Кінець інтервалу",
+    "Interval start": "Інтервальний початок",
+    "Inverter 1": "Інвертор 1",
+    "Inverter 2": "Інвертор 2",
+    "Inverter 3": "Інвертор 3",
+    "Inverter 4": "Інвертор 4",
+    "Please check if inverter 1 available": "Будь ласка, перевірте, чи доступний інвертор 1",
+    "Please check if inverter 2 available": "Будь ласка, перевірте, чи доступний інвертор 2",
+    "Please check if inverter 3 available": "Будь ласка, перевірте, чи доступний інвертор 3",
+    "Please check if inverter 4 available": "Перевірте наявність інвертора 4",
+    "Please check if self consumption meter 1 is available": "Будь ласка, перевірте, чи доступний лічильник власного споживання 1",
+    "Please check if self consumption meter 2 is available": "Будь ласка, перевірте, чи доступний лічильник власного споживання 2",
+    "Please check if self consumption meter 3 is available": "Будь ласка, перевірте, чи доступний лічильник власного споживання 3",
+    "Please check if self consumption meter 4 is available": "Будь ласка, перевірте, чи доступний лічильник власного споживання 4",
+    "Please check if you use the self consumption meter sum": "Будь ласка, перевірте, чи використовуєте ви суму лічильника власного споживання",
+    "Please check if you want to set a system variable in the CCU": "Перевірте, чи хочете ви встановити системну змінну в CCU",
+    "Please enter if you have a d0-converter": "Будь ласка, введіть, якщо у вас є d0-конвертер",
+    "Please enter the CCU system variable": "Введіть системну змінну CCU",
+    "Please enter the IP-Address from your SolarView data logger": "Будь ласка, введіть IP-адресу з вашого реєстратора даних SolarView",
+    "Please enter the interval (cron format)": "Будь ласка, введіть інтервал (формат cron)",
+    "Please enter the interval end (e.g. 23:59)": "Будь ласка, введіть кінець інтервалу (наприклад, 23:59)",
+    "Please enter the interval start (e.g. 00:00)": "Будь ласка, введіть початок інтервалу (наприклад, 00:00)",
+    "Please enter the port": "Будь ласка, введіть порт",
+    "Self consumption meter 1": "Лічильник власного споживання 1",
+    "Self consumption meter 2": "Лічильник власного споживання 2",
+    "Self consumption meter 3": "Лічильник власного споживання 3",
+    "Self consumption meter 4": "Лічильник власного споживання 4",
+    "Self consumption meter sum": "Сума лічильника власного споживання",
+    "Set system variable CCU": "Встановити системну змінну CCU",
+    "SolarView Logger": "SolarView Logger",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView — це реєстратор даних для кількох інверторів. Додаткову інформацію можна отримати за посиланням.",
+    "System variable": "Системна змінна",
+    "System variable e.g. hm-rega.0.12345": "Системна змінна напр. hm-rega.0.12345",
+    "polling interval in seconds": "інтервал опитування в секундах",
+    "solarviewdatareader adapter settings": "Параметри адаптера для solarviewdatareader"
+}

package/admin/i18n/zh-cn/translations.json

@@ -0,0 +1,40 @@
+{
+    "Here you can define the polling interval [between 10 to 3600 seconds]": "在这里您可以定义轮询间隔 [10 到 3600 秒之间]",
+    "IP-Address": "IP地址",
+    "Interval": "间隔",
+    "Interval end": "间隔结束",
+    "Interval start": "间隔开始",
+    "Inverter 1": "逆变器1",
+    "Inverter 2": "逆变器2",
+    "Inverter 3": "逆变器3",
+    "Inverter 4": "逆变器4",
+    "Please check if inverter 1 available": "请检查逆变器1是否可用",
+    "Please check if inverter 2 available": "请检查逆变器2是否可用",
+    "Please check if inverter 3 available": "请检查逆变器3是否可用",
+    "Please check if inverter 4 available": "请检查逆变器4是否可用",
+    "Please check if self consumption meter 1 is available": "请检查自用电表1是否可用",
+    "Please check if self consumption meter 2 is available": "请检查自用电表2是否可用",
+    "Please check if self consumption meter 3 is available": "请检查自用电表3是否可用",
+    "Please check if self consumption meter 4 is available": "请检查自用电度表4是否可用",
+    "Please check if you use the self consumption meter sum": "请检查您是否使用自费表的总和",
+    "Please check if you want to set a system variable in the CCU": "请检查是否要在CCU中设置系统变量",
+    "Please enter if you have a d0-converter": "如果您有d0转换器，请输入",
+    "Please enter the CCU system variable": "请输入CCU系统变量",
+    "Please enter the IP-Address from your SolarView data logger": "请从SolarView数据记录器输入IP地址",
+    "Please enter the interval (cron format)": "请输入间隔（cron格式）",
+    "Please enter the interval end (e.g. 23:59)": "请输入间隔结束时间（例如23:59）",
+    "Please enter the interval start (e.g. 00:00)": "请输入间隔开始时间（例如00:00）",
+    "Please enter the port": "请输入端口",
+    "Self consumption meter 1": "自用电表1",
+    "Self consumption meter 2": "自用电表2",
+    "Self consumption meter 3": "自用电度表3",
+    "Self consumption meter 4": "自用电度表4",
+    "Self consumption meter sum": "自耗表总和",
+    "Set system variable CCU": "设置系统变量CCU",
+    "SolarView Logger": "SolarView记录器",
+    "SolarView is a data logger for several inverter. Further informations can be get over the link.": "SolarView是多个逆变器的数据记录器。",
+    "System variable": "系统变量",
+    "System variable e.g. hm-rega.0.12345": "系统变量例如hm-rega.0.12345",
+    "polling interval in seconds": "以秒为单位的轮询间隔",
+    "solarviewdatareader adapter settings": "solarviewdatareader的适配器设置"
+}