iobroker.renault 0.0.25 → 1.1.0

package/README.md

@@ -13,35 +13,178 @@
 
 ## Renault / Dacia / Alpine adapter for ioBroker
 
-This adapter connects ioBroker to the My Renault / My Dacia / My Alpine cloud and exposes vehicle status data (battery, charging, HVAC, mileage, ...) as well as remote commands (HVAC start, charging start/stop, force refresh) for compatible Renault, Dacia and Alpine models such as the Renault Zoe, Megane E-Tech, Kangoo E-Tech, the Dacia Spring and the Alpine A290.
+This adapter connects ioBroker to the cloud of [Renault](https://www.renault.com/), [Dacia](https://www.dacia.com/)
+and [Alpine](https://www.alpinecars.com/). It reads vehicle data (battery, charging, climate control,
+mileage, location, tyre pressure, ...) and sends remote commands (climate control, charging, charge
+limits, horn and lights) for connected models such as the Renault Zoe, Megane E-Tech, Renault 5, the
+Dacia Spring and the Alpine A290.
+
+The adapter logs in with the account of the **My Renault**, **My Dacia** or **My Alpine** app. A
+car works with the adapter when it can be controlled in that app.
 
 ## Installation / Login
 
 1. Install the adapter via the ioBroker admin UI.
 2. Open the adapter configuration and enter the credentials of your **My Renault** (or **My Dacia** / **My Alpine**) account: app email and app password.
-3. Select the **brand** matching your app: `Renault / Dacia` or `Alpine` (they use separate accounts and API keys).
-4. Set the **country** to the two-letter country code matching your account (e.g. `de`, `fr`, `it`, `es`).
-5. Optionally set the polling **interval** in minutes and the **API key** (leave empty for auto-detect).
-6. Save and the instance will start polling.
+3. Select the **brand** of your app: `Renault / Dacia` for My Renault and My Dacia, `Alpine` for My Alpine. All three apps log in at the same Renault service; the brand decides which account of your login the adapter uses.
+4. Select the **country** of your account in the app.
+5. Click **Test login** to check email and password before saving. The instance must be running for the button to work.
+6. Optionally set the polling **interval** in minutes and the **API key** (leave empty for auto-detect).
+7. Save and the instance will start polling. **Connection** below the login fields shows whether it is connected.
+
+## Supported models
+
+What each model supports comes from the endpoint table of
+[renault-api](https://github.com/hacf-fr/renault-api) (`src/renault_api/kamereon/models.py`, read on
+2026-09-17). `yes`: supported, `no`: not supported, so the adapter neither creates the state nor
+sends the request, `?`: renault-api does not say, so the adapter tries it. A model that is not in
+the table gets every request; what the car rejects is asked again once a day. Your model code is in
+`general.vehicleDetails.model.code`.
+
+<!-- models:start (generated by tools/updateVehicleEndpoints.js) -->
+
+### Renault
+
+| Model                                   | Code   | Battery | Cockpit | Climate | Charging start | Charging stop | Charge limits | Horn / lights | Tyre pressure | Alerts |
+| --------------------------------------- | ------ | ------- | ------- | ------- | -------------- | ------------- | ------------- | ------------- | ------------- | ------ |
+| Arkana E-tech full hybrid               | XJL2TR | ?       | yes     | ?       | ?              | ?             | ?             | ?             | no            | ?      |
+| AUSTRAL                                 | XHN1SU | no      | yes     | no      | no             | no            | no            | yes           | no            | ?      |
+| CAPTUR II                               | XJB1SU | yes     | yes     | yes     | no             | no            | no            | no            | no            | ?      |
+| CAPTUR II GPL                           | XJB2SU | no      | yes     | no      | no             | no            | no            | yes           | no            | no     |
+| CLIO V                                  | XJA1VP | no      | yes     | no      | no             | no            | no            | no            | no            | no     |
+| CLIO V                                  | XJA2VP | no      | yes     | no      | no             | no            | no            | no            | no            | no     |
+| MEGANE E-TECH                           | XCB1VE | yes     | yes     | yes     | yes            | no            | yes           | yes           | no            | ?      |
+| Megane IV                               | XFB2BI | yes     | yes     | ?       | ?              | ?             | ?             | ?             | no            | ?      |
+| Megane IV Break (E-Tech Plug-in Hybrid) | XFB2BK | yes     | yes     | yes     | yes            | ?             | ?             | no            | no            | ?      |
+| Rafale                                  | XHN1CP | yes     | yes     | ?       | no             | no            | ?             | yes           | no            | ?      |
+| Renault 5 E-TECH                        | R5E1VE | yes     | yes     | yes     | yes            | no            | yes           | yes           | no            | yes    |
+| Renault Espace VI (OpenRLink)           | XHN1ML | no      | yes     | no      | no             | no            | no            | yes           | no            | no     |
+| Renault Master E-Tech                   | XDD1VE | yes     | yes     | yes     | yes            | no            | yes           | yes           | no            | ?      |
+| Renault R4 E-Tech                       | A4E1VE | yes     | yes     | yes     | yes            | no            | yes           | yes           | no            | ?      |
+| Renault Symbioz 2025                    | XJB2CP | no      | yes     | no      | no             | no            | no            | yes           | no            | ?      |
+| SCENIC E-TECH                           | XCB1SE | yes     | yes     | yes     | yes            | no            | yes           | yes           | no            | ?      |
+| TWINGO III                              | X071VE | yes     | yes     | ?       | ?              | ?             | ?             | ?             | no            | ?      |
+| ZOE phase 1                             | X101VE | yes     | yes     | yes     | yes            | ?             | no            | ?             | no            | ?      |
+| ZOE phase 2                             | X102VE | yes     | yes     | yes     | yes            | yes           | no            | no            | yes           | ?      |
+
+### Dacia
+
+| Model                                                         | Code   | Battery | Cockpit | Climate | Charging start | Charging stop | Charge limits | Horn / lights | Tyre pressure | Alerts |
+| ------------------------------------------------------------- | ------ | ------- | ------- | ------- | -------------- | ------------- | ------------- | ------------- | ------------- | ------ |
+| DACIA BIGSTER HYBRID 155 (no EV)                              | BD11SL | no      | yes     | ?       | no             | no            | no            | no            | no            | no     |
+| Dacia Duster III                                              | DU31SU | no      | yes     | ?       | ?              | ?             | no            | no            | no            | ?      |
+| DACIA SANDERO III (ECO-G, petrol+LPG; engineEnergyType OTHER) | XJF2BI | no      | yes     | no      | no             | no            | no            | yes           | no            | no     |
+| DACIA SPRING                                                  | XBG1VE | yes     | yes     | yes     | yes            | yes           | no            | no            | no            | no     |
+
+### Alpine
+
+| Model       | Code   | Battery | Cockpit | Climate | Charging start | Charging stop | Charge limits | Horn / lights | Tyre pressure | Alerts |
+| ----------- | ------ | ------- | ------- | ------- | -------------- | ------------- | ------------- | ------------- | ------------- | ------ |
+| Alpine A290 | A5E1AE | yes     | yes     | yes     | yes            | no            | yes           | yes           | no            | no     |
+
+<!-- models:end -->
 
 ## Remote control
 
 Each vehicle is created as a device using its VIN. Remote commands are exposed as states under `renault.0.<VIN>.remote.*`:
 
-| State                       | Type    | Action |
-| --------------------------- | ------- | ------ |
-| `actions/hvac-start`        | boolean | `true` = start, `false` = stop pre-conditioning |
-| `hvac-temperature`          | number  | Target HVAC temperature |
-| `actions/charging-start`    | boolean | `true` = start, `false` = stop charging |
-| `charge/pause-resume`       | boolean | `true` = start, `false` = pause |
-| `charge/start`              | boolean | `true` = start, `false` = stop charging (legacy endpoint) |
-| `refresh`                   | boolean | `true` = force refresh of vehicle data |
-
-Set the corresponding state to `true` to trigger the command.
-
-## Discussion / questions
-
-ioBroker forum: <https://forum.iobroker.net/topic/48074/test-adapter-renault-v0-0-x>
+| State                   | Type    | Role                | Action                                                                                      |
+| ----------------------- | ------- | ------------------- | ------------------------------------------------------------------------------------------- |
+| `climateStart`          | boolean | `button.start`      | start the climate control                                                                   |
+| `climateStop`           | boolean | `button.stop`       | stop the climate control                                                                    |
+| `climateTemperature`    | number  | `level.temperature` | target temperature in °C for the next start (default 21)                                    |
+| `chargingStart`         | boolean | `button.start`      | start charging (see below)                                                                  |
+| `chargingStop`          | boolean | `button.stop`       | stop charging                                                                               |
+| `chargeLimitMin`        | number  | `level`             | minimum charge level in %, 15 to 45 in steps of 5                                           |
+| `chargeLimitTarget`     | number  | `level`             | target charge level in %, 55 to 100 in steps of 5                                           |
+| `chargeMode`            | string  | `text`              | `always`, `always_charging`, `schedule_mode` or `scheduled`; shows the mode the car reports |
+| `hornStart`             | boolean | `button.start`      | sound the horn                                                                              |
+| `lightsStart`           | boolean | `button.start`      | flash the lights                                                                            |
+| `refreshLocation`       | boolean | `button`            | read the location from the cloud now                                                        |
+| `askForLocationRefresh` | boolean | `button`            | ask the car to upload its position, read the location 30 s later                            |
+| `refreshAll`            | boolean | `button`            | poll all vehicle data now                                                                   |
+| `refreshBattery`        | boolean | `button`            | read the battery status from the cloud now                                                  |
+| `refreshClimate`        | boolean | `button`            | read the climate control status (`hvac-status`) from the cloud now                          |
+| `lastCommandError`      | string  | `text`              | error of the last command, empty after a successful command                                 |
+
+A button is pressed by writing `true`. The adapter resets it to `false` with `ack: true` once the
+command was handled; `lastCommandError` tells whether the Renault cloud accepted it. The car carries
+it out afterwards, and the data states show the result after the next poll, for example
+`hvac-status.hvacStatus` and `battery-status.chargingStatus`.
+
+`chargeLimitMin` and `chargeLimitTarget` are sent together, so the adapter needs the other limit
+from `soc-levels`. It is read once per hour; right after the start a write waits for that first
+read. Both states show the limits the car reports, also after a change in the app.
+
+The `refresh…` buttons read only what the cloud holds; the car uploads by itself, for example after
+a change at the wallbox or when it is switched off. `askForLocationRefresh` first asks the car to
+upload its position, which wakes its telematics unit; it reads only when the cloud accepted that
+request, and the result is in `lastCommandError`. Do not press it from a script in a tight loop,
+every press wakes the car and draws on its 12 V battery. The car cannot be asked for its battery or
+climate control status: the Zoe phase 2 answers the refresh requests known from other projects with 404. Each button costs one read instead of a full poll, and the same data of a vehicle is read at
+most every three minutes.
+
+A script that follows the wallbox presses `refreshBattery` itself when the car has had time to
+upload, for example one minute after the wallbox changed. Frequent use of `refreshAll` can exhaust
+the request quota of the account, which also blocks the My Renault app.
+
+Which request a command sends, and which vehicle data the adapter polls, depends on the model. The
+adapter uses the endpoint table of [renault-api](https://github.com/hacf-fr/renault-api) (model code
+in `general.vehicleDetails.model.code`):
+
+- A button the model does not support is not created. Models that cannot stop charging remotely,
+  for example the Megane E-Tech, Renault 4, Renault 5 and Alpine A290, have no `chargingStop`.
+- Renault 4, Renault 5, Alpine A290, Scenic E-Tech and Master E-Tech charge by schedule. On these
+  models `chargingStart` **switches off all charge programs**, as the My Renault app does; switch
+  them on again in the app.
+- Data the model does not provide is not polled, which saves requests.
+- A model renault-api does not list yet gets the default requests: every command and endpoint is tried,
+  and unsupported endpoints are asked again once a day.
+
+## Vehicle data
+
+The data of each endpoint is written to a channel below `renault.0.<VIN>`, named after the
+endpoint, for example `battery-status`, `cockpit` and `hvac-status`. Most are asked on every
+poll; these change slowly and are asked once per hour:
+
+| Channel          | Content                                                   |
+| ---------------- | --------------------------------------------------------- |
+| `charge-history` | charges per day                                           |
+| `charges`        | single charges                                            |
+| `pressure`       | tyre pressure per wheel in mbar and a status code         |
+| `alerts`         | alerts of the car (Renault 5); a cleared alert is removed |
+| `soc-levels`     | minimum and target charge level                           |
+
+## FAQ
+
+**The log says "Feature not found for … Ignore … for 24 hours".** The car or its service pack
+does not offer this data. The adapter asks again once a day, which costs one request.
+
+**The log says "invalid loginID or password", or the login is rejected.** Set a new password in the
+My Renault (My Dacia, My Alpine) app, enter it in the adapter settings and restart the instance.
+Until then the adapter sends no commands, so it cannot lock the account with the old password.
+
+**The log or the admin notifications say Renault asks for a code by email.** Renault asks some
+accounts for a code sent by email at login (two-factor authentication). Open the instance
+settings and press **Test login**. The adapter has Renault send the code and names the address.
+Enter the code in **Code from the email** within 10 minutes and press **Confirm code**. A wrong
+code can be corrected without a new email; after 10 minutes press **Test login** again for a new
+code. If the email on the page is the one the instance uses, the instance connects at once and
+removes the notification; for a new email, save and close the settings. Renault remembers the
+ioBroker installation for about 30 days, and the adapter keeps its login session across restarts,
+so a new code is needed only when Renault ends that session.
+
+**The log says the Renault request quota is used up (429).** The account allows about 60 requests
+per hour, shared with the app. The adapter pauses by itself for 15, 30 and then 60 minutes. Raise
+the update interval, and use `refreshAll` rarely; the adapter warns once when its settings need
+more requests than the quota allows.
+
+**`chargingStart` switched off my charge schedule.** On the Renault 4, Renault 5, Alpine A290,
+Scenic E-Tech and Master E-Tech this is how charging is started, the app does the same. Switch the
+programs on again in the app.
+
+**A remote state is missing.** The model does not support the command according to the table
+above; the adapter does not create it, and removes it if an older version had created it.
 
 ## Changelog
 
@@ -50,6 +193,44 @@ ioBroker forum: <https://forum.iobroker.net/topic/48074/test-adapter-renault-v0-
   ### **WORK IN PROGRESS**
 -->
 
+### 1.1.0 (2026-10-22)
+
+- New button in the settings to test the login before saving.
+- Accounts that need a login code by email work again. The code is requested and confirmed in the settings.
+- The login is kept across restarts.
+- A space around the email no longer breaks the login (#82).
+- The country setting is shown in the language of the admin.
+- Map widgets now find the vehicle position.
+
+### 1.0.0 (2026-09-23)
+
+- (typhosj) **Breaking change:** the remote states are renamed and every command is a button. `actions/hvac-start` becomes `climateStart` and `climateStop`, `hvac-temperature` becomes `climateTemperature` (default 21 °C, a valid old value is taken over), `actions/charging-start`, `charge/pause-resume` and `charge/start` become `chargingStart` and `chargingStop`, and `refresh` becomes `refreshAll`. The old states are removed on the first start. Adjust scripts and visualizations
+- (typhosj) **Breaking change:** only one cockpit version is polled per vehicle (v2 if it answers, else v1; v1 fills in while v2 answers with server errors), and its data is always written to `cockpit`; the `cockpitv2` channel is removed
+- (typhosj) **Breaking change:** battery, range, mileage, fuel and temperature states get units and specific roles
+- (typhosj) `battery-status.plugStatus` and `battery-status.chargingStatus` name their codes, for example `1` plugged or `0.3` waiting for current charge
+- (typhosj) **Breaking change:** the update interval is at least 5 minutes (15 minutes for new installations)
+- (typhosj) commands and polled data follow the endpoint table of renault-api per model: each command sends the request the model needs, and commands or data the model does not offer are neither created nor polled
+- (typhosj) a command button is reset with ack after the command, charge mode and charge limits are confirmed with ack once the Renault cloud accepted them, and `remote.lastCommandError` holds the error of the last command
+- (typhosj) `chargingStart` starts charging on the Renault 4, Renault 5, Alpine A290, Scenic E-Tech and Master E-Tech by switching off their charge programs, as the app does
+- (typhosj) read and set the minimum and target charge level with `remote.chargeLimitMin` and `remote.chargeLimitTarget` on models that support it; the current limits are in the new channel `soc-levels`
+- (typhosj) set the charge mode with `remote.chargeMode`; it and the charge limit states show the values the car reports
+- (typhosj) new buttons `remote.hornStart` and `remote.lightsStart` on models that support them; `remote.refreshLocation`, `remote.refreshBattery` and `remote.refreshClimate` read only the location, the battery status or the climate control status from the cloud, and `remote.askForLocationRefresh` first asks the car to upload its position and reads it 30 seconds later; during a quota pause, or while the car does not offer the data, these buttons send nothing and say why in `lastCommandError`
+- (typhosj) new channels `pressure` (tyre pressure in mbar) and `alerts` (Renault 5), read once per hour; a cleared alert is removed
+- (typhosj) the vehicle is named after its model without doubling it (`ZOE` instead of `ZOEZOE`); a name given by the user is kept
+- (typhosj) the vehicle list and details are loaded again every 24 hours, new vehicles are picked up, and the details channel is named "Vehicle details"
+- (typhosj) fewer requests against Renault's quota of about 60 per hour: slow-changing data such as the charge history is fetched once per hour, and the adapter warns once when its settings need more requests than the quota allows
+- (typhosj) when the request quota is used up (429), polling pauses for 15, 30 and then 60 minutes instead of logging an error per endpoint; a command that meets the quota error starts the pause too
+- (typhosj) an expired token during a poll is refreshed and the poll repeated once; after a failed token refresh the adapter logs in again with growing delay; only wrong credentials stop the login, a temporary error of the account service is retried
+- (typhosj) an endpoint the car rejected is asked again once a day instead of never until restart; an answer without data counts as not supported; an endpoint with server errors for 24 hours is asked only hourly, and its server error is logged once as warning
+- (typhosj) login and requests use the country from the settings instead of always Germany; the settings offer the countries of the My Renault app as a list
+- (typhosj) the Kamereon API key lookup accepts only a well-formed key; an invalid key in the settings is ignored with a warning, and the link to the current key in the settings points to renault-api, where the lookup reads it
+- (typhosj) polls no longer overlap, requests time out after 30 seconds, no timer survives a stop of the instance, and the adapter only listens to its remote states
+- (typhosj) the log no longer contains the vehicle list, the position of the car or the whole answer to a failed login
+- (typhosj) a vehicle whose VIN contains characters other than letters and digits is skipped with a warning
+- (typhosj) an invalid number of charge history entries or an unknown brand in the settings is replaced by the default with a warning; more than 1000 entries are capped at 1000
+- (typhosj) the adapter icon and readme links point to the `main` branch again
+- (typhosj) lint uses the shared `@iobroker/eslint-config`; dependencies updated
+
 ### 0.0.25
 
 - (typhosj) retry the connection with growing delay (5 to 60 minutes) when login or vehicle list fail at startup; a login rejected by the account service is not retried
@@ -68,14 +249,6 @@ ioBroker forum: <https://forum.iobroker.net/topic/48074/test-adapter-renault-v0-
 
 - (TA2k) align API headers with My Renault Android app, drop EOL Node 18/20, migrate admin UI to jsonConfig
 
-### 0.0.22
-
-- (TA2k) update dependencies, migrate to ESLint 10, fix repochecker findings
-
-### 0.0.7
-
-- (TA2k) initial release
-
 [Older changelogs can be found here](CHANGELOG_OLD.md)
 
 ## License

package/admin/i18n/de.json

@@ -0,0 +1,41 @@
+{
+    "A code was sent to %s. Enter it below and press Confirm code.": "Ein Code wurde an %s gesendet. Unten eingeben und Code bestätigen drücken.",
+    "A login test is already running.": "Ein Login-Test läuft bereits.",
+    "API Key": "API-Schlüssel",
+    "API Key (leave empty for auto-detect)": "API-Schlüssel (leer lassen für automatische Erkennung)",
+    "App Email": "App E-Mail",
+    "App Password": "App Passwort",
+    "Brand": "Marke",
+    "Charge history entries to keep": "Aufzubewahrende Einträge der Ladehistorie",
+    "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.": "Prüft E-Mail und Passwort mit den Werten auf dieser Seite, ohne zu speichern. Wenn Renault einen Code verlangt, wird er per E-Mail gesendet.",
+    "Click here for current API Key": "Hier klicken für aktuellen API-Schlüssel",
+    "Code from the email": "Code aus der E-Mail",
+    "Confirm code": "Code bestätigen",
+    "Connected": "Verbunden",
+    "Connection": "Verbindung",
+    "Country": "Land",
+    "Country of the account in the app": "Land des Kontos in der App",
+    "Disable charge fetching": "Ladedaten-Abruf deaktivieren",
+    "Email and password are correct. Save and close to start the adapter.": "E-Mail und Passwort sind richtig. Speichern und schließen, um den Adapter zu starten.",
+    "Email or password is wrong. Use the same login as in the app.": "E-Mail oder Passwort ist falsch. Bitte dieselben Zugangsdaten wie in der App verwenden.",
+    "Enter email and password first.": "Bitte zuerst E-Mail und Passwort eingeben.",
+    "Enter the code from the email, digits only.": "Bitte den Code aus der E-Mail eingeben, nur Ziffern.",
+    "If empty, the API key will be set automatically": "Wenn leer, wird der API-Schlüssel automatisch gesetzt",
+    "Login": "Anmeldung",
+    "Login confirmed. Save and close to start the adapter.": "Anmeldung bestätigt. Speichern und schließen, um den Adapter zu starten.",
+    "Login confirmed. The adapter connects now.": "Anmeldung bestätigt. Der Adapter verbindet sich jetzt.",
+    "Login confirmed. The adapter is already connected.": "Anmeldung bestätigt. Der Adapter ist bereits verbunden.",
+    "No code is waiting. Press Test login to get a new code.": "Es wartet kein Code. Login testen drücken, um einen neuen Code zu bekommen.",
+    "Not connected": "Nicht verbunden",
+    "Number of most recent entries kept per charge-history endpoint (0 = unlimited)": "Anzahl der neuesten Einträge, die je Ladehistorie-Endpunkt behalten werden (0 = unbegrenzt)",
+    "Only needed when Test login says a code was sent": "Nur nötig, wenn Login testen meldet, dass ein Code gesendet wurde",
+    "Polling": "Abfrage",
+    "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app": "Renault / Dacia für die App My Renault und My Dacia, Alpine für die App My Alpine",
+    "Renault has no email address for the login code of this account. Check the account in the app.": "Renault hat für dieses Konto keine E-Mail-Adresse für den Anmeldecode. Bitte das Konto in der App prüfen.",
+    "Test login": "Login testen",
+    "The account service did not answer. Check the internet connection of ioBroker and try again.": "Der Kontodienst hat nicht geantwortet. Bitte die Internetverbindung von ioBroker prüfen und es erneut versuchen.",
+    "The account service refused the code. Press Test login to get a new code.": "Der Kontodienst hat den Code abgelehnt. Login testen drücken, um einen neuen Code zu bekommen.",
+    "The account service refused the login. Log in once in the app, then try again.": "Der Kontodienst hat die Anmeldung abgelehnt. Bitte einmal in der App anmelden und es dann erneut versuchen.",
+    "The code is wrong. Check the email and try again.": "Der Code ist falsch. Bitte die E-Mail prüfen und es erneut versuchen.",
+    "Update interval in minutes": "Aktualisierungsintervall in Minuten"
+}

package/admin/i18n/en.json

@@ -0,0 +1,41 @@
+{
+    "A code was sent to %s. Enter it below and press Confirm code.": "A code was sent to %s. Enter it below and press Confirm code.",
+    "A login test is already running.": "A login test is already running.",
+    "API Key": "API Key",
+    "API Key (leave empty for auto-detect)": "API Key (leave empty for auto-detect)",
+    "App Email": "App Email",
+    "App Password": "App Password",
+    "Brand": "Brand",
+    "Charge history entries to keep": "Charge history entries to keep",
+    "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.": "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.",
+    "Click here for current API Key": "Click here for current API Key",
+    "Code from the email": "Code from the email",
+    "Confirm code": "Confirm code",
+    "Connected": "Connected",
+    "Connection": "Connection",
+    "Country": "Country",
+    "Country of the account in the app": "Country of the account in the app",
+    "Disable charge fetching": "Disable charge fetching",
+    "Email and password are correct. Save and close to start the adapter.": "Email and password are correct. Save and close to start the adapter.",
+    "Email or password is wrong. Use the same login as in the app.": "Email or password is wrong. Use the same login as in the app.",
+    "Enter email and password first.": "Enter email and password first.",
+    "Enter the code from the email, digits only.": "Enter the code from the email, digits only.",
+    "If empty, the API key will be set automatically": "If empty, the API key will be set automatically",
+    "Login": "Login",
+    "Login confirmed. Save and close to start the adapter.": "Login confirmed. Save and close to start the adapter.",
+    "Login confirmed. The adapter connects now.": "Login confirmed. The adapter connects now.",
+    "Login confirmed. The adapter is already connected.": "Login confirmed. The adapter is already connected.",
+    "No code is waiting. Press Test login to get a new code.": "No code is waiting. Press Test login to get a new code.",
+    "Not connected": "Not connected",
+    "Number of most recent entries kept per charge-history endpoint (0 = unlimited)": "Number of most recent entries kept per charge-history endpoint (0 = unlimited)",
+    "Only needed when Test login says a code was sent": "Only needed when Test login says a code was sent",
+    "Polling": "Polling",
+    "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app": "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app",
+    "Renault has no email address for the login code of this account. Check the account in the app.": "Renault has no email address for the login code of this account. Check the account in the app.",
+    "Test login": "Test login",
+    "The account service did not answer. Check the internet connection of ioBroker and try again.": "The account service did not answer. Check the internet connection of ioBroker and try again.",
+    "The account service refused the code. Press Test login to get a new code.": "The account service refused the code. Press Test login to get a new code.",
+    "The account service refused the login. Log in once in the app, then try again.": "The account service refused the login. Log in once in the app, then try again.",
+    "The code is wrong. Check the email and try again.": "The code is wrong. Check the email and try again.",
+    "Update interval in minutes": "Update interval in minutes"
+}

package/admin/i18n/es.json

@@ -0,0 +1,41 @@
+{
+    "A code was sent to %s. Enter it below and press Confirm code.": "Se envió un código a %s. Introdúzcalo abajo y pulse Confirmar código.",
+    "A login test is already running.": "Ya se está ejecutando una prueba de inicio de sesión.",
+    "API Key": "Clave API",
+    "API Key (leave empty for auto-detect)": "Clave API (déjelo vacío para detección automática)",
+    "App Email": "Correo electrónico de la app",
+    "App Password": "Contraseña de la app",
+    "Brand": "Marca",
+    "Charge history entries to keep": "Entradas del historial de carga a conservar",
+    "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.": "Comprueba el correo y la contraseña con los valores de esta página, sin guardar. Si Renault pide un código, se envía por correo electrónico.",
+    "Click here for current API Key": "Haga clic aquí para la clave API actual",
+    "Code from the email": "Código del correo",
+    "Confirm code": "Confirmar código",
+    "Connected": "Conectado",
+    "Connection": "Conexión",
+    "Country": "País",
+    "Country of the account in the app": "País de la cuenta en la app",
+    "Disable charge fetching": "Deshabilitar obtención de carga",
+    "Email and password are correct. Save and close to start the adapter.": "El correo y la contraseña son correctos. Guarde y cierre para iniciar el adaptador.",
+    "Email or password is wrong. Use the same login as in the app.": "El correo o la contraseña son incorrectos. Use los mismos datos de acceso que en la app.",
+    "Enter email and password first.": "Introduzca primero el correo y la contraseña.",
+    "Enter the code from the email, digits only.": "Introduzca el código del correo, solo dígitos.",
+    "If empty, the API key will be set automatically": "Si está vacío, la clave API se establecerá automáticamente",
+    "Login": "Acceso",
+    "Login confirmed. Save and close to start the adapter.": "Inicio de sesión confirmado. Guarde y cierre para iniciar el adaptador.",
+    "Login confirmed. The adapter connects now.": "Inicio de sesión confirmado. El adaptador se conecta ahora.",
+    "Login confirmed. The adapter is already connected.": "Inicio de sesión confirmado. El adaptador ya está conectado.",
+    "No code is waiting. Press Test login to get a new code.": "No hay ningún código pendiente. Pulse Probar inicio de sesión para recibir un código nuevo.",
+    "Not connected": "No conectado",
+    "Number of most recent entries kept per charge-history endpoint (0 = unlimited)": "Número de entradas más recientes que se conservan por endpoint del historial de carga (0 = ilimitado)",
+    "Only needed when Test login says a code was sent": "Solo necesario cuando Probar inicio de sesión indica que se envió un código",
+    "Polling": "Sondeo",
+    "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app": "Renault / Dacia para la app My Renault y My Dacia, Alpine para la app My Alpine",
+    "Renault has no email address for the login code of this account. Check the account in the app.": "Renault no tiene ninguna dirección de correo electrónico para el código de inicio de sesión de esta cuenta. Compruebe la cuenta en la app.",
+    "Test login": "Probar inicio de sesión",
+    "The account service did not answer. Check the internet connection of ioBroker and try again.": "El servicio de cuentas no respondió. Compruebe la conexión a internet de ioBroker y vuelva a intentarlo.",
+    "The account service refused the code. Press Test login to get a new code.": "El servicio de la cuenta rechazó el código. Pulse Probar inicio de sesión para recibir un código nuevo.",
+    "The account service refused the login. Log in once in the app, then try again.": "El servicio de cuentas rechazó el inicio de sesión. Inicie sesión una vez en la app y vuelva a intentarlo.",
+    "The code is wrong. Check the email and try again.": "El código es incorrecto. Compruebe el correo e inténtelo de nuevo.",
+    "Update interval in minutes": "Intervalo de actualización en minutos"
+}

package/admin/i18n/fr.json

@@ -0,0 +1,41 @@
+{
+    "A code was sent to %s. Enter it below and press Confirm code.": "Un code a été envoyé à %s. Saisissez-le ci-dessous et appuyez sur Confirmer le code.",
+    "A login test is already running.": "Un test de connexion est déjà en cours.",
+    "API Key": "Clé API",
+    "API Key (leave empty for auto-detect)": "Clé API (laisser vide pour détection automatique)",
+    "App Email": "Email de l'application",
+    "App Password": "Mot de passe de l'application",
+    "Brand": "Marque",
+    "Charge history entries to keep": "Entrées de l'historique de charge à conserver",
+    "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.": "Vérifie l’e-mail et le mot de passe avec les valeurs de cette page, sans enregistrer. Si Renault demande un code, il est envoyé par e-mail.",
+    "Click here for current API Key": "Cliquez ici pour la clé API actuelle",
+    "Code from the email": "Code reçu par e-mail",
+    "Confirm code": "Confirmer le code",
+    "Connected": "Connecté",
+    "Connection": "Connexion",
+    "Country": "Pays",
+    "Country of the account in the app": "Pays du compte dans l'application",
+    "Disable charge fetching": "Désactiver la récupération de charge",
+    "Email and password are correct. Save and close to start the adapter.": "L’e-mail et le mot de passe sont corrects. Enregistrez et fermez pour démarrer l’adaptateur.",
+    "Email or password is wrong. Use the same login as in the app.": "L’e-mail ou le mot de passe est incorrect. Utilisez les mêmes identifiants que dans l’application.",
+    "Enter email and password first.": "Saisissez d’abord l’e-mail et le mot de passe.",
+    "Enter the code from the email, digits only.": "Saisissez le code reçu par e-mail, chiffres uniquement.",
+    "If empty, the API key will be set automatically": "Si vide, la clé API sera définie automatiquement",
+    "Login": "Connexion",
+    "Login confirmed. Save and close to start the adapter.": "Connexion confirmée. Enregistrez et fermez pour démarrer l'adaptateur.",
+    "Login confirmed. The adapter connects now.": "Connexion confirmée. L'adaptateur se connecte maintenant.",
+    "Login confirmed. The adapter is already connected.": "Connexion confirmée. L'adaptateur est déjà connecté.",
+    "No code is waiting. Press Test login to get a new code.": "Aucun code n'est en attente. Appuyez sur Tester la connexion pour obtenir un nouveau code.",
+    "Not connected": "Non connecté",
+    "Number of most recent entries kept per charge-history endpoint (0 = unlimited)": "Nombre d'entrées les plus récentes conservées par point d'accès de l'historique de charge (0 = illimité)",
+    "Only needed when Test login says a code was sent": "Nécessaire uniquement lorsque Tester la connexion indique qu'un code a été envoyé",
+    "Polling": "Interrogation",
+    "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app": "Renault / Dacia pour l'application My Renault et My Dacia, Alpine pour l'application My Alpine",
+    "Renault has no email address for the login code of this account. Check the account in the app.": "Renault n’a aucune adresse e-mail pour le code de connexion de ce compte. Vérifiez le compte dans l’application.",
+    "Test login": "Tester la connexion",
+    "The account service did not answer. Check the internet connection of ioBroker and try again.": "Le service de compte n’a pas répondu. Vérifiez la connexion internet d’ioBroker et réessayez.",
+    "The account service refused the code. Press Test login to get a new code.": "Le service du compte a refusé le code. Appuyez sur Tester la connexion pour obtenir un nouveau code.",
+    "The account service refused the login. Log in once in the app, then try again.": "Le service de compte a refusé la connexion. Connectez-vous une fois dans l’application, puis réessayez.",
+    "The code is wrong. Check the email and try again.": "Le code est incorrect. Vérifiez l'e-mail et réessayez.",
+    "Update interval in minutes": "Intervalle de mise à jour en minutes"
+}

package/admin/i18n/it.json

@@ -0,0 +1,41 @@
+{
+    "A code was sent to %s. Enter it below and press Confirm code.": "Un codice è stato inviato a %s. Inseriscilo qui sotto e premi Conferma codice.",
+    "A login test is already running.": "Una prova di accesso è già in corso.",
+    "API Key": "Chiave API",
+    "API Key (leave empty for auto-detect)": "Chiave API (lascia vuoto per il rilevamento automatico)",
+    "App Email": "Email dell'app",
+    "App Password": "Password dell'app",
+    "Brand": "Marchio",
+    "Charge history entries to keep": "Voci della cronologia di ricarica da conservare",
+    "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.": "Verifica e-mail e password con i valori di questa pagina, senza salvare. Se Renault chiede un codice, viene inviato via e-mail.",
+    "Click here for current API Key": "Fai clic qui per la chiave API attuale",
+    "Code from the email": "Codice dell'e-mail",
+    "Confirm code": "Conferma codice",
+    "Connected": "Connesso",
+    "Connection": "Connessione",
+    "Country": "Paese",
+    "Country of the account in the app": "Paese dell'account nell'app",
+    "Disable charge fetching": "Disabilita il recupero della carica",
+    "Email and password are correct. Save and close to start the adapter.": "E-mail e password sono corrette. Salva e chiudi per avviare l’adattatore.",
+    "Email or password is wrong. Use the same login as in the app.": "E-mail o password errate. Usa le stesse credenziali dell’app.",
+    "Enter email and password first.": "Inserisci prima e-mail e password.",
+    "Enter the code from the email, digits only.": "Inserisci il codice dell'e-mail, solo cifre.",
+    "If empty, the API key will be set automatically": "Se vuoto, la chiave API verrà impostata automaticamente",
+    "Login": "Accesso",
+    "Login confirmed. Save and close to start the adapter.": "Accesso confermato. Salva e chiudi per avviare l'adattatore.",
+    "Login confirmed. The adapter connects now.": "Accesso confermato. L'adattatore si connette ora.",
+    "Login confirmed. The adapter is already connected.": "Accesso confermato. L'adattatore è già connesso.",
+    "No code is waiting. Press Test login to get a new code.": "Nessun codice in attesa. Premi Prova accesso per ottenere un nuovo codice.",
+    "Not connected": "Non connesso",
+    "Number of most recent entries kept per charge-history endpoint (0 = unlimited)": "Numero di voci più recenti conservate per ogni endpoint della cronologia di ricarica (0 = illimitato)",
+    "Only needed when Test login says a code was sent": "Necessario solo quando Prova accesso indica che è stato inviato un codice",
+    "Polling": "Polling",
+    "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app": "Renault / Dacia per l'app My Renault e My Dacia, Alpine per l'app My Alpine",
+    "Renault has no email address for the login code of this account. Check the account in the app.": "Renault non ha un indirizzo e-mail per il codice di accesso di questo account. Controlla l’account nell’app.",
+    "Test login": "Prova accesso",
+    "The account service did not answer. Check the internet connection of ioBroker and try again.": "Il servizio account non ha risposto. Controlla la connessione internet di ioBroker e riprova.",
+    "The account service refused the code. Press Test login to get a new code.": "Il servizio dell'account ha rifiutato il codice. Premi Prova accesso per ottenere un nuovo codice.",
+    "The account service refused the login. Log in once in the app, then try again.": "Il servizio account ha rifiutato l’accesso. Accedi una volta nell’app, poi riprova.",
+    "The code is wrong. Check the email and try again.": "Il codice non è corretto. Controlla l'e-mail e riprova.",
+    "Update interval in minutes": "Intervallo di aggiornamento in minuti"
+}

package/admin/i18n/nl.json

@@ -0,0 +1,41 @@
+{
+    "A code was sent to %s. Enter it below and press Confirm code.": "Er is een code verstuurd naar %s. Voer die hieronder in en druk op Code bevestigen.",
+    "A login test is already running.": "Er loopt al een inlogtest.",
+    "API Key": "API-sleutel",
+    "API Key (leave empty for auto-detect)": "API-sleutel (laat leeg voor auto-detectie)",
+    "App Email": "App E-mail",
+    "App Password": "App Wachtwoord",
+    "Brand": "Merk",
+    "Charge history entries to keep": "Te bewaren items van de laadgeschiedenis",
+    "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.": "Controleert e-mail en wachtwoord met de waarden op deze pagina, zonder op te slaan. Als Renault een code vraagt, wordt die per e-mail verstuurd.",
+    "Click here for current API Key": "Klik hier voor de huidige API-sleutel",
+    "Code from the email": "Code uit de e-mail",
+    "Confirm code": "Code bevestigen",
+    "Connected": "Verbonden",
+    "Connection": "Verbinding",
+    "Country": "Land",
+    "Country of the account in the app": "Land van het account in de app",
+    "Disable charge fetching": "Laadgegevens ophalen uitschakelen",
+    "Email and password are correct. Save and close to start the adapter.": "E-mail en wachtwoord kloppen. Opslaan en sluiten om de adapter te starten.",
+    "Email or password is wrong. Use the same login as in the app.": "E-mail of wachtwoord is onjuist. Gebruik dezelfde inloggegevens als in de app.",
+    "Enter email and password first.": "Vul eerst e-mail en wachtwoord in.",
+    "Enter the code from the email, digits only.": "Voer de code uit de e-mail in, alleen cijfers.",
+    "If empty, the API key will be set automatically": "Indien leeg, wordt de API-sleutel automatisch ingesteld",
+    "Login": "Inloggen",
+    "Login confirmed. Save and close to start the adapter.": "Inloggen bevestigd. Sla op en sluit om de adapter te starten.",
+    "Login confirmed. The adapter connects now.": "Inloggen bevestigd. De adapter maakt nu verbinding.",
+    "Login confirmed. The adapter is already connected.": "Inloggen bevestigd. De adapter is al verbonden.",
+    "No code is waiting. Press Test login to get a new code.": "Er wacht geen code. Druk op Inloggen testen om een nieuwe code te krijgen.",
+    "Not connected": "Niet verbonden",
+    "Number of most recent entries kept per charge-history endpoint (0 = unlimited)": "Aantal meest recente items dat per laadgeschiedenis-endpoint wordt bewaard (0 = onbeperkt)",
+    "Only needed when Test login says a code was sent": "Alleen nodig als Inloggen testen meldt dat er een code is verstuurd",
+    "Polling": "Polling",
+    "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app": "Renault / Dacia voor de app My Renault en My Dacia, Alpine voor de app My Alpine",
+    "Renault has no email address for the login code of this account. Check the account in the app.": "Renault heeft geen e-mailadres voor de inlogcode van dit account. Controleer het account in de app.",
+    "Test login": "Inloggen testen",
+    "The account service did not answer. Check the internet connection of ioBroker and try again.": "De accountdienst antwoordde niet. Controleer de internetverbinding van ioBroker en probeer het opnieuw.",
+    "The account service refused the code. Press Test login to get a new code.": "De accountservice heeft de code geweigerd. Druk op Inloggen testen om een nieuwe code te krijgen.",
+    "The account service refused the login. Log in once in the app, then try again.": "De accountdienst heeft het inloggen geweigerd. Log één keer in via de app en probeer het opnieuw.",
+    "The code is wrong. Check the email and try again.": "De code is onjuist. Controleer de e-mail en probeer het opnieuw.",
+    "Update interval in minutes": "Update interval in minuten"
+}

package/admin/i18n/pl.json

@@ -0,0 +1,41 @@
+{
+    "A code was sent to %s. Enter it below and press Confirm code.": "Kod został wysłany na adres %s. Wpisz go poniżej i naciśnij Potwierdź kod.",
+    "A login test is already running.": "Test logowania już trwa.",
+    "API Key": "Klucz API",
+    "API Key (leave empty for auto-detect)": "Klucz API (pozostaw puste, aby wykryć automatycznie)",
+    "App Email": "Email aplikacji",
+    "App Password": "Hasło aplikacji",
+    "Brand": "Marka",
+    "Charge history entries to keep": "Liczba zachowywanych wpisów historii ładowania",
+    "Checks email and password with the values on this page, without saving. If Renault asks for a code, it is sent by email.": "Sprawdza e-mail i hasło z wartościami z tej strony, bez zapisywania. Jeśli Renault wymaga kodu, zostaje wysłany e-mailem.",
+    "Click here for current API Key": "Kliknij tutaj, aby uzyskać aktualny klucz API",
+    "Code from the email": "Kod z e-maila",
+    "Confirm code": "Potwierdź kod",
+    "Connected": "Połączono",
+    "Connection": "Połączenie",
+    "Country": "Kraj",
+    "Country of the account in the app": "Kraj konta w aplikacji",
+    "Disable charge fetching": "Wyłącz pobieranie danych ładowania",
+    "Email and password are correct. Save and close to start the adapter.": "E-mail i hasło są poprawne. Zapisz i zamknij, aby uruchomić adapter.",
+    "Email or password is wrong. Use the same login as in the app.": "E-mail lub hasło jest nieprawidłowe. Użyj tych samych danych logowania co w aplikacji.",
+    "Enter email and password first.": "Najpierw wpisz e-mail i hasło.",
+    "Enter the code from the email, digits only.": "Wpisz kod z e-maila, tylko cyfry.",
+    "If empty, the API key will be set automatically": "Jeśli puste, klucz API zostanie ustawiony automatycznie",
+    "Login": "Logowanie",
+    "Login confirmed. Save and close to start the adapter.": "Logowanie potwierdzone. Zapisz i zamknij, aby uruchomić adapter.",
+    "Login confirmed. The adapter connects now.": "Logowanie potwierdzone. Adapter łączy się teraz.",
+    "Login confirmed. The adapter is already connected.": "Logowanie potwierdzone. Adapter jest już połączony.",
+    "No code is waiting. Press Test login to get a new code.": "Żaden kod nie oczekuje. Naciśnij Testuj logowanie, aby otrzymać nowy kod.",
+    "Not connected": "Nie połączono",
+    "Number of most recent entries kept per charge-history endpoint (0 = unlimited)": "Liczba najnowszych wpisów zachowywanych dla każdego endpointu historii ładowania (0 = bez limitu)",
+    "Only needed when Test login says a code was sent": "Potrzebne tylko wtedy, gdy Testuj logowanie zgłasza, że wysłano kod",
+    "Polling": "Odpytywanie",
+    "Renault / Dacia for the My Renault and My Dacia app, Alpine for the My Alpine app": "Renault / Dacia dla aplikacji My Renault i My Dacia, Alpine dla aplikacji My Alpine",
+    "Renault has no email address for the login code of this account. Check the account in the app.": "Renault nie ma adresu e-mail do kodu logowania tego konta. Sprawdź konto w aplikacji.",
+    "Test login": "Testuj logowanie",
+    "The account service did not answer. Check the internet connection of ioBroker and try again.": "Usługa konta nie odpowiedziała. Sprawdź połączenie internetowe ioBrokera i spróbuj ponownie.",
+    "The account service refused the code. Press Test login to get a new code.": "Usługa konta odrzuciła kod. Naciśnij Testuj logowanie, aby otrzymać nowy kod.",
+    "The account service refused the login. Log in once in the app, then try again.": "Usługa konta odrzuciła logowanie. Zaloguj się raz w aplikacji i spróbuj ponownie.",
+    "The code is wrong. Check the email and try again.": "Kod jest nieprawidłowy. Sprawdź e-mail i spróbuj ponownie.",
+    "Update interval in minutes": "Interwał aktualizacji w minutach"
+}