iobroker.poolcontrol 1.3.25 → 1.3.27

package/lib/i18n/es.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Valor actual de ORP",
   "pH reference": "Referencia de pH",
   "Status": "Estado",
-  "ORP evaluation is disabled.": "La evaluación de ORP está desactivada."
+  "ORP evaluation is disabled.": "La evaluación de ORP está desactivada.",
+
+  "Calculated amount": "Cantidad calculada",
+  "Reference value based on common manufacturer dosage.": "Valor de referencia basado en la dosificación habitual del fabricante.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Siga las instrucciones del fabricante y vuelva a medir después.",
+
+  "Pool volume must be greater than 0 liters.": "El volumen de la piscina debe ser superior a 0 litros.",
+  "Current pH value must be between 0 and 14.": "El valor actual de pH debe estar entre 0 y 14.",
+  "Target pH value must be between 0 and 14.": "El valor objetivo de pH debe estar entre 0 y 14.",
+  "Dosage factor must be greater than 0 grams.": "El factor de dosificación debe ser superior a 0 gramos.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Para pH Plus, el valor objetivo de pH debe ser superior al valor actual de pH.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Para pH Minus, el valor objetivo de pH debe ser inferior al valor actual de pH.",
+  "Current salt concentration must be 0 ppm or higher.": "La concentración actual de sal debe ser de 0 ppm o superior.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "La concentración objetivo de sal debe ser superior a la concentración actual de sal.",
+  "Reference value for raising the salt concentration in pool water.": "Valor de referencia para aumentar la concentración de sal en el agua de la piscina.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Siga las instrucciones del fabricante del sistema de sal y añada sal gradualmente.",
+  "salt": "sal"
 }

package/lib/i18n/fr.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Valeur ORP actuelle",
   "pH reference": "Référence pH",
   "Status": "État",
-  "ORP evaluation is disabled.": "L'évaluation ORP est désactivée."
+  "ORP evaluation is disabled.": "L'évaluation ORP est désactivée.",
+
+  "Calculated amount": "Quantité calculée",
+  "Reference value based on common manufacturer dosage.": "Valeur de référence basée sur le dosage habituel du fabricant.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Veuillez suivre les instructions du fabricant et mesurer à nouveau ensuite.",
+
+  "Pool volume must be greater than 0 liters.": "Le volume de la piscine doit être supérieur à 0 litre.",
+  "Current pH value must be between 0 and 14.": "La valeur actuelle du pH doit être comprise entre 0 et 14.",
+  "Target pH value must be between 0 and 14.": "La valeur cible du pH doit être comprise entre 0 et 14.",
+  "Dosage factor must be greater than 0 grams.": "Le facteur de dosage doit être supérieur à 0 gramme.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Pour pH Plus, la valeur cible du pH doit être supérieure à la valeur actuelle du pH.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Pour pH Minus, la valeur cible du pH doit être inférieure à la valeur actuelle du pH.",
+  "Current salt concentration must be 0 ppm or higher.": "La concentration actuelle en sel doit être de 0 ppm ou plus.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "La concentration cible en sel doit être supérieure à la concentration actuelle en sel.",
+  "Reference value for raising the salt concentration in pool water.": "Valeur de référence pour augmenter la concentration en sel dans l’eau de la piscine.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Respectez les instructions du fabricant du système au sel et ajoutez le sel progressivement.",
+  "salt": "sel"
 }

package/lib/i18n/it.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Valore ORP attuale",
   "pH reference": "Riferimento pH",
   "Status": "Stato",
-  "ORP evaluation is disabled.": "La valutazione ORP è disattivata."
+  "ORP evaluation is disabled.": "La valutazione ORP è disattivata.",
+
+  "Calculated amount": "Quantità calcolata",
+  "Reference value based on common manufacturer dosage.": "Valore di riferimento basato sul dosaggio standard del produttore.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Seguire le istruzioni del produttore ed effettuare una nuova misurazione successivamente.",
+
+  "Pool volume must be greater than 0 liters.": "Il volume della piscina deve essere maggiore di 0 litri.",
+  "Current pH value must be between 0 and 14.": "Il valore attuale del pH deve essere compreso tra 0 e 14.",
+  "Target pH value must be between 0 and 14.": "Il valore target del pH deve essere compreso tra 0 e 14.",
+  "Dosage factor must be greater than 0 grams.": "Il fattore di dosaggio deve essere maggiore di 0 grammi.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Per pH Plus, il valore target del pH deve essere superiore al valore attuale del pH.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Per pH Minus, il valore target del pH deve essere inferiore al valore attuale del pH.",
+  "Current salt concentration must be 0 ppm or higher.": "La concentrazione attuale di sale deve essere pari o superiore a 0 ppm.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "La concentrazione target di sale deve essere superiore alla concentrazione attuale di sale.",
+  "Reference value for raising the salt concentration in pool water.": "Valore di riferimento per aumentare la concentrazione di sale nell’acqua della piscina.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Seguire le istruzioni del produttore del sistema a sale e aggiungere il sale gradualmente.",
+  "salt": "sale"
 }

package/lib/i18n/nl.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Huidige ORP-waarde",
   "pH reference": "pH-referentie",
   "Status": "Status",
-  "ORP evaluation is disabled.": "ORP-evaluatie is uitgeschakeld."
+  "ORP evaluation is disabled.": "ORP-evaluatie is uitgeschakeld.",
+
+  "Calculated amount": "Berekende hoeveelheid",
+  "Reference value based on common manufacturer dosage.": "Referentiewaarde gebaseerd op de gebruikelijke dosering van de fabrikant.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Volg de instructies van de fabrikant en meet daarna opnieuw.",
+
+  "Pool volume must be greater than 0 liters.": "Het zwembadvolume moet groter zijn dan 0 liter.",
+  "Current pH value must be between 0 and 14.": "De huidige pH-waarde moet tussen 0 en 14 liggen.",
+  "Target pH value must be between 0 and 14.": "De doel-pH-waarde moet tussen 0 en 14 liggen.",
+  "Dosage factor must be greater than 0 grams.": "De doseringsfactor moet groter zijn dan 0 gram.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Voor pH Plus moet de doel-pH-waarde hoger zijn dan de huidige pH-waarde.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Voor pH Minus moet de doel-pH-waarde lager zijn dan de huidige pH-waarde.",
+  "Current salt concentration must be 0 ppm or higher.": "De huidige zoutconcentratie moet 0 ppm of hoger zijn.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "De doel-zoutconcentratie moet hoger zijn dan de huidige zoutconcentratie.",
+  "Reference value for raising the salt concentration in pool water.": "Referentiewaarde voor het verhogen van de zoutconcentratie in het zwembadwater.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Volg de instructies van de fabrikant van het zoutsysteem en voeg zout geleidelijk toe.",
+  "salt": "zout"
 }

package/lib/i18n/pl.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Aktualna wartość ORP",
   "pH reference": "Odniesienie pH",
   "Status": "Status",
-  "ORP evaluation is disabled.": "Ocena ORP jest wyłączona."
+  "ORP evaluation is disabled.": "Ocena ORP jest wyłączona.",
+
+  "Calculated amount": "Obliczona ilość",
+  "Reference value based on common manufacturer dosage.": "Wartość orientacyjna oparta na standardowym dawkowaniu producenta.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Należy przestrzegać instrukcji producenta i ponownie wykonać pomiar.",
+
+  "Pool volume must be greater than 0 liters.": "Objętość basenu musi być większa niż 0 litrów.",
+  "Current pH value must be between 0 and 14.": "Aktualna wartość pH musi mieścić się w zakresie od 0 do 14.",
+  "Target pH value must be between 0 and 14.": "Docelowa wartość pH musi mieścić się w zakresie od 0 do 14.",
+  "Dosage factor must be greater than 0 grams.": "Współczynnik dozowania musi być większy niż 0 gramów.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Dla pH Plus docelowa wartość pH musi być wyższa niż aktualna wartość pH.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Dla pH Minus docelowa wartość pH musi być niższa niż aktualna wartość pH.",
+  "Current salt concentration must be 0 ppm or higher.": "Aktualne stężenie soli musi wynosić 0 ppm lub więcej.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "Docelowe stężenie soli musi być wyższe niż aktualne stężenie soli.",
+  "Reference value for raising the salt concentration in pool water.": "Wartość referencyjna do podnoszenia stężenia soli w wodzie basenowej.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Przestrzegaj instrukcji producenta systemu solnego i dodawaj sól stopniowo.",
+  "salt": "sól"
 }

package/lib/i18n/pt.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Valor ORP atual",
   "pH reference": "Referência de pH",
   "Status": "Estado",
-  "ORP evaluation is disabled.": "A avaliação ORP está desativada."
+  "ORP evaluation is disabled.": "A avaliação ORP está desativada.",
+
+  "Calculated amount": "Quantidade calculada",
+  "Reference value based on common manufacturer dosage.": "Valor de referência baseado na dosagem habitual do fabricante.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Siga as instruções do fabricante e meça novamente depois.",
+
+  "Pool volume must be greater than 0 liters.": "O volume da piscina deve ser superior a 0 litros.",
+  "Current pH value must be between 0 and 14.": "O valor atual de pH deve estar entre 0 e 14.",
+  "Target pH value must be between 0 and 14.": "O valor alvo de pH deve estar entre 0 e 14.",
+  "Dosage factor must be greater than 0 grams.": "O fator de dosagem deve ser superior a 0 gramas.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Para pH Plus, o valor alvo de pH deve ser superior ao valor atual de pH.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Para pH Minus, o valor alvo de pH deve ser inferior ao valor atual de pH.",
+  "Current salt concentration must be 0 ppm or higher.": "A concentração atual de sal deve ser de 0 ppm ou superior.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "A concentração alvo de sal deve ser superior à concentração atual de sal.",
+  "Reference value for raising the salt concentration in pool water.": "Valor de referência para aumentar a concentração de sal na água da piscina.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Siga as instruções do fabricante do sistema de sal e adicione sal gradualmente.",
+  "salt": "sal"
 }

package/lib/i18n/ru.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Текущее значение ORP",
   "pH reference": "Опорное значение pH",
   "Status": "Статус",
-  "ORP evaluation is disabled.": "Оценка ORP отключена."
+  "ORP evaluation is disabled.": "Оценка ORP отключена.",
+
+  "Calculated amount": "Рассчитанное количество",
+  "Reference value based on common manufacturer dosage.": "Ориентировочное значение на основе стандартной дозировки производителя.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Следуйте инструкциям производителя и выполните повторное измерение после обработки.",
+
+  "Pool volume must be greater than 0 liters.": "Объём бассейна должен быть больше 0 литров.",
+  "Current pH value must be between 0 and 14.": "Текущее значение pH должно находиться в диапазоне от 0 до 14.",
+  "Target pH value must be between 0 and 14.": "Целевое значение pH должно находиться в диапазоне от 0 до 14.",
+  "Dosage factor must be greater than 0 grams.": "Коэффициент дозировки должен быть больше 0 граммов.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Для pH Plus целевое значение pH должно быть выше текущего значения pH.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Для pH Minus целевое значение pH должно быть ниже текущего значения pH.",
+  "Current salt concentration must be 0 ppm or higher.": "Текущая концентрация соли должна быть 0 ppm или выше.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "Целевая концентрация соли должна быть выше текущей концентрации соли.",
+  "Reference value for raising the salt concentration in pool water.": "Ориентировочное значение для повышения концентрации соли в воде бассейна.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Следуйте инструкциям производителя солевой системы и добавляйте соль постепенно.",
+  "salt": "соль"
 }

package/lib/i18n/uk.json

@@ -347,5 +347,23 @@
   "Current ORP value": "Поточне значення ORP",
   "pH reference": "Еталон pH",
   "Status": "Статус",
-  "ORP evaluation is disabled.": "Оцінювання ORP вимкнено."
+  "ORP evaluation is disabled.": "Оцінювання ORP вимкнено.",
+
+  "Calculated amount": "Розрахована кількість",
+  "Reference value based on common manufacturer dosage.": "Орієнтовне значення на основі стандартного дозування виробника.",
+  "Follow the manufacturer instructions and re-measure afterwards.": "Дотримуйтесь інструкцій виробника та виконайте повторне вимірювання після обробки.",
+
+  "Pool volume must be greater than 0 liters.": "Об’єм басейну повинен бути більшим за 0 літрів.",
+  "Current pH value must be between 0 and 14.": "Поточне значення pH повинно бути в межах від 0 до 14.",
+  "Target pH value must be between 0 and 14.": "Цільове значення pH повинно бути в межах від 0 до 14.",
+  "Dosage factor must be greater than 0 grams.": "Коефіцієнт дозування повинен бути більшим за 0 грамів.",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "Для pH Plus цільове значення pH повинно бути вищим за поточне значення pH.",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "Для pH Minus цільове значення pH повинно бути нижчим за поточне значення pH.",
+  "Current salt concentration must be 0 ppm or higher.": "Поточна концентрація солі має бути 0 ppm або вище.",
+
+  "Target salt concentration must be higher than the current salt concentration.": "Цільова концентрація солі має бути вищою за поточну концентрацію солі.",
+  "Reference value for raising the salt concentration in pool water.": "Орієнтовне значення для підвищення концентрації солі у воді басейну.",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "Дотримуйтесь інструкцій виробника сольової системи та додавайте сіль поступово.",
+  "salt": "сіль"
 }

package/lib/i18n/zh-cn.json

@@ -347,5 +347,23 @@
   "Current ORP value": "当前 ORP 值",
   "pH reference": "pH 参考值",
   "Status": "状态",
-  "ORP evaluation is disabled.": "ORP 评估已禁用。"
+  "ORP evaluation is disabled.": "ORP 评估已禁用。",
+
+  "Calculated amount": "计算结果",
+  "Reference value based on common manufacturer dosage.": "基于常见制造商剂量说明的参考值。",
+  "Follow the manufacturer instructions and re-measure afterwards.": "请遵循制造商说明，并在处理后重新测量。",
+
+  "Pool volume must be greater than 0 liters.": "泳池容量必须大于 0 升。",
+  "Current pH value must be between 0 and 14.": "当前 pH 值必须在 0 到 14 之间。",
+  "Target pH value must be between 0 and 14.": "目标 pH 值必须在 0 到 14 之间。",
+  "Dosage factor must be greater than 0 grams.": "剂量系数必须大于 0 克。",
+
+  "For pH Plus, the target pH value must be higher than the current pH value.": "对于 pH Plus，目标 pH 值必须高于当前 pH 值。",
+  "For pH Minus, the target pH value must be lower than the current pH value.": "对于 pH Minus，目标 pH 值必须低于当前 pH 值。",
+  "Current salt concentration must be 0 ppm or higher.": "当前盐浓度必须为 0 ppm 或更高。",
+
+  "Target salt concentration must be higher than the current salt concentration.": "目标盐浓度必须高于当前盐浓度。",
+  "Reference value for raising the salt concentration in pool water.": "用于提高泳池水中盐浓度的参考值。",
+  "Follow the salt system manufacturer instructions and add salt gradually.": "请遵循盐系统制造商说明，并逐步加盐。",
+  "salt": "盐"
 }